COVER PLATE & PROTECTIVE CAP UTILITY TOOL

Transcription

COVER PLATE & PROTECTIVE CAP UTILITY TOOL
COVER PLATE & PROTECTIVE CAP UTILITY TOOL
for Concealed Sprinklers
/ / Designed for Additional
Versatility
/ / Install and Remove Cover
Plates for LFII and RFII
Concealed Sprinklers
/ / Also Used for Removing
Protective Caps
Features & Benefits:
/ / Designed for versatility
/ / Can be mounted onto a
painter’s pole or straight
section of 1” CPVC
/ / Thumb-tightened screw
assures positive connection to
CPVC
/ / One-piece molded design
eliminates stress points
/ / Thicker foam protects cover
plate finish
/ / Used with cover plates and
protective caps for the
following sprinklers:
TY2524, TY3531, TY3532,
TY3551, TY3596
The cover plate installation
tool allows the safe, quick
installation and removal of
cover plates for LFII and RFII
concealed sprinklers. The
integral threads in the top of
the tool also allow for easy
removal of sprinkler protective
caps. This design features a
thumb-tightened screw and
can accommodate a threaded
painter’s pole or straight length
of 1” CPVC, allowing the
installer to install and remove
caps and plates safely without
the need for ladders. Can be
used with all LFII and RFII
concealed sprinklers.
Safer.Smarter.Tyco™
PRODUCT SPECIFICATIONS
Used with the following
sprinkler SINs:
TY2524
TY3531
TY3532
TY3551
TY3596
Protective Cap
Part number:
912011015
Cover Plate Tool
Part number:
560001300
Always refer to the Technical Data Sheet TFP1540 for complete description of all Listing criteria, design
parameters, installation instructions, care and maintenance guidelines, and our limited warranty.
Tyco Fire Protection Products
www.tyco-fire.com
Technical Services - Phone: 800-381-9312
Fax: 800-791-5500
All brand names, product names or trademarks belong to their respective owners. Tyco Fire Protection Products reserves the right
to change product design and specifications without notice. Copyright © 2014 Tyco Fire Products LP. All rights reserved.
TF-2012014