Document 6588784

Transcription

Document 6588784
NATIONAL ADVISORY COMMITTEE
Er. Ashok Kumar Basa, FIE, President, IE(I)
Er. H C S Berry, FIE, Chairman, CVDB, IE(I)
Er. S S Rathore, FIE, I. P. President, IEI and M- CVDB, IEI
Er. S L Garg, FIE, Past, President, IEI and M- CVDB, IEI
Prof. S.K. Chaudhary, IIT Kanpur
Prof. Dipak Mazumdar, IIT Kanpur
Dr. J Ram Kumar, IIT Kanpur
Dr.R S Anand ,IIT,Kanpur
Prof. Jitendra Kumar , IIT Kanpur
Dr.R K Pandey ,IIT Dehli
Dr. Anand Kumar ,HBTI,Kanpur
Dr. Narendra Kohli ,HBTI Kanpur
Dr.Vinay Pratap Singh , HBTI,Kanpur
Dr. Rajeev Gupta, HBTI, Kanpur
Dr. Gaurav Bartarya, HBTI, Kanpur
Dr. R K Bajaj ,BIS, Lucknow
Er. Amit Mai Srivastav ,HAL Kanpur
Prof. Vakil Singh , IIT BHU,Varanasi
Dr. Rajeev Srivastav ,MNNIT ,Allahabad
Er. Sisir Kumar Banerjee, FIE, M- CVDB, IEI
Er. Narendra Singh, FIE, M-CVDB, IEI
Dr. R K Biswal, FIE, M-CVDB, IEI
Er. M B Dagaonkar, FIE, M- CVDB, IEI
Er. J K Dutta, FIE, M-CVDB, IEI
Er. P S Gahlot, FIE, M-CVDB, IEI
Er. V K Gupta, FIE, M-CVDB, IEI
Er. Archan KusumMajumdar, FIE, M-CVDB, IEI
Er. Jagdish Mohan, FIE, M-CVDB, IEI
Er. ChandrakantRaipat, FIE, M-CVDB, IEI
Prof G Sankarasubramanian, FIE, M-CVDB, IEI
Er. I Satyanarayana Raju, FIE, M-CVDB, IEI
Prof. D L Shah, FIE, M-CVDB, IEI
Er. V B Singh, FIE, M-CVDB, IEI
Er. G Sudhakar, FIE, M-CVDB, IEI
Er. Sandeep B Vasava, MIE, M-CVDB, IEI
Er. D P Singh Virk, FIE, M-CVDB, IEI
Er. H L Mina, FIE, M-CVDB, IEI
Er. D K Gupta, FIE, M-CVDB, IEI
Er. N K Birar, FIE, M-CVDB, IEI
Er. L M Patra, FIE, M-CVDB, IEI
Er. P P Agarwal, FIE, Hony. Secy., IE(I), Kanpur L.Centre
All India Seminar
CHIEF PATRON
Mr. Pranveer Singh, Chairman
Mrs. Nirmala Singh, Vice Chairperson
Advances in
Manufacturing Technology
PATRON
Dr. A.K.Saxena, Director PSIT
Dr. N. K. Singh, Director PSITCOE
Dr. S.L.Shukla, Director Acad.
Dr. A. K. Rai, Director Pharmacy
Ms. Shefali Raj, Director CR
Mr. Suresh Singh, Director HR
Dr. Pradeep Kumar, Chairman IEI,K
Contact
Correspondence
Department of Mechanical Engineering,
Convener
PSIT College of Engineering
Mobile : 09559273188
NH-2 Kanpur Agra Highway Kanpur
[email protected]
www.psitcoe.ac.in
[email protected]
&
Light Weight Materials
November 15-16, 2014
CONVENER
Er. Aditya Kumar
Head, Department of Mechanical Engineering
FINANCE COMMITTEE
Er. N. S. Parmar
Er. Ritesh Dixit
Er. Prabhat Kumar Rai
Er. Pankaj Singh Chauhan
RECEPTION & HOSPITALITY
Er. Hariveer Singh
Er. Nitin Singh
Er. Manish Dixit
Er. Sujeet Maurya
Organized By
Department of Mechanical Engineering
PUBLICITY & CORRESPONDENCE
Er. Aditya Kumar
on
Er. Ritesh Dixit
Er. Pankaj Singh Chauhan
Er. Nitin Singh
Er. Hariveer Singh
Er. Manish Dixit
Er. Sujeet Maurya
PSIT College of Engineering, Kanpur, U.P
www.psitcoe.ac.in
In Association with
The Institution of Engineers (India)
Kanpur Local Centre
ABOUT PSIT COLLEGE OF ENGINEERING
The PSIT College of Engineering Kanpur was established in 2008.
The institute is affiliated to Uttar Pradesh Technical University,
Lucknow. The Institute offers under graduate courses in Mechanical
Engineering, Civil Engineering, Electronics & Communication,
Computer Science, and Information Technology. Keeping abreast
with modern developments, PSITCOE are constantly restructuring &
renovating its infrastructure as well as its academic, research &
teaching learning facilities.
ABOUT
THE
DEPARTMENT
OF
MECHANICAL
ENGINEERING
The department is well set to provide first-rate knowledge in
Mechanical Engineering, not only a high standard of knowledge but
also administrative, management and software skills are inculcated
in the young students. Academic activities also emphasizes on allround development of students. The department has a highly
qualified faculty with excellent academic record from IITs and other
renowned institutes in India. There is a proportionate mix of
academic and industrial experience amongst the faculty members,
which is instrumental in imparting the right blend of theoretical and
practical knowledge to the students.
ABOUT INSTITUTION OF ENGINEERS
The Institution of Engineers (India) is the largest multidisciplinary
professional body that encompasses 15 engineering disciplines and
gives engineers a global platform from which to share professional
interest. IEI has membership strength of nearly 0.7 million.
Established in 1920, with its headquarters at 8 Gokhale Road,
Kolkata, IEI has served the engineering fraternity for over nine
decades. In this period of time it has been inextricably linked with
the history of modern-day-engineering.
All India Seminar
CALL OF PAPERS
The authors are invited to submit their research / review papers and case
studies in the myriad of conference themes listed below but not limited to:
Advances in Manufacturing Technology
Engineering structural design
Micro Machining
Smart materials
Materials used in Aerospace applications
Materials used in Medical applications
Light weight materials in Automobile industry
Light weight materials in shipping
Nanotechnology
Composites
Powder metallurgy
&
Light Weight Materials
November 15-16, 2014
REGISTRATION FORM
REGISTRATION FEE
CATEGORY
Faculty Members
Members of IE (I)
Students
FEE
Rs. 750
Rs. 600
Rs. 500
All the participants need to register for seminar, the registration fee is to be
submitted through Demand Draft in favor of “Director, PSIT College of
Engineering” , payable at Kanpur. The registration form along with the fee
can be submitted in person or by post to the office of Er. Aditya Kumar,
Head, Department of Mechanical Engineering, PSIT College of
Engineering, Bhauti, Kanpur-209305. The accommodation to the outstation
participants will be provided in hostel as per the availability on payment
basis.
INSTRUCTION FOR AUTHORS
SEMINAR OBJECTIVES
Every generation of human beings has been continuously involved in
manufacturing to make its existence comfortable. The development
and advancement of civilizations have been strongly related to their
ability to process materials to fulfill their needs. Economic
production with better quality can be achieved through optimal
utilization and advancement in manufacturing techniques and
materials. It has been observed that sometimes technological
developments are restricted due to non-availability of materials
which can meet the requirements. Greatly accelerated technology
development programs have produced number of materials with
improved properties and manufacturing techniques which can meet
the ever-increasing demands of modern era. The seminar aims to
create awareness, share existing practices, to widen future
prospective issues concerning both materials and manufacturing
technologies and to bring academia and industry on a common
platform for right cause.
on
_______________________________
Designation: _______________________________
Organization: _______________________________
Address:
_______________________________
Mobile:
__________________________________
E-mail:
_______________________________
Title of the paper:________________________
Prospective authors are invited to submit original & unpublished papers in
the seminar; full text manuscript in IEEE template is to be submitted &
length of paper is limited to maximum of six pages. Authors may send
papers to [email protected]. Papers must be only in DOC (*.doc)
file format.
IMPORTANT DATES
Submission of full papers
Paper acceptance notification
Submission of final papers with
registration
Name :
November,8-2014
November,10-2014
November,12-2014
Paper ID.:______________________________
I am enclosing a Demand Draft in favor of “Director,
PSIT College of Engineering” payable at Kanpur of
Rs.__________
DD No.________________
Date______________
Name of the Bank
Accommodation Required: YES / NO
Date:
Place:
(Signature)