electronic displays Conference 2015    Wednesday, 25 February 2015 Opening of the electronic displays Conference 2015

electronic displays Conference 2015 Wednesday, 25 February 2015 09:50 ‐ 10:00 Opening of the electronic displays Conference 2015
Prof. Dr. Karlheinz Blankenbach, Pforzheim University of Applied Science Keynote‐Session: Market & Applications 10:00 ‐ 10:30 Keynote: The Third Wave of LCD Comes to an End, or Does it? Bob Raikes, Meko 10:30 ‐ 11:00 Keynote: The next display industry pivot: Creative destruction Ian Hendy, Hendy Consulting 11:00 ‐ 11:30 Keynote: Key Success Factors for Industry 4.0 – New Challenges for Usability and User Experience 11:30 ‐ 12:00 Keynote: Automotive cockpit and the emerging role of displays 12:00 ‐ 13:20 Author Interviews & Lunch break (20 min + 60 min) 13:20 ‐ 13:40 Session 1: Optical (Touch) Optimization Session 2: Measurements Optical Bonding Technology VacuBond® Bernhard Staller, Distec Successful optical bonding to flat panel displays Michael Dent, Optical Filters Optical Bonded Displays, State of the Art Technology and Future Challenges Dr. Klaus Radermacher, Via A New Era of High Accuracy Imaging Colorimeters Dr. Denan Konjhodzic, Dr. Martin Wolf, Instrument Systems Black MURA Measurements – Ideas for future enhancement Udo Krüger, TechnoTeam Bildverarbeitung Evaluation of Bayfol® HX holographic film for emerging display technologies; Optical measurement techniques and a novel method for characterization of 3D holographic display units Tomasz Tarnowski, i‐sft Characterization of the Influence of Anti Glare Coatings on Display Distinctness of Image Dr. Thomas Fink, Dr. h.c. F. Porsche 13:40 ‐ 14:00 14:00 ‐ 14:20 14:20 ‐ 14:40 14:40 ‐ 15:00 15:00 ‐ 15:40 15:40 ‐ 16:00 16:00 ‐ 16:20 16:20 ‐ 16:40 16:40 ‐ 17:00 17:00 ‐ 17:20 17:20 ‐ 17:40 Durable anti‐fingerprint coatings enable anti‐reflective displays for touch technology Dr. Marten Walther, SCHOTT Surface Lighting for Optical Multi‐Touch Tables: Combination of DI and FTIR Alexander Rieß, Unity Lab Author Interviews & Coffee break & Poster Session (20 min + 20 min) Franz Koller, User Interface Design Prashanth Halady, Bosch High‐resolution scatter measurement and evaluation Dr. Michael E. Becker, Display‐Messtechnik & Systeme Session 3: LCD Performance Optimization Session 4: Touch Screens RGBW Display Technology Thomas Koch, JDI Europe Quantum Dots in LCD for Extended Colour Gamut Michael Patz, 3M Germany QD in Display Application Dr. Armin Wedel, Fraunhofer IAP Analysis of the Refresh‐rate for Display Power Reduction of Mobile Display Devices Hee Eun Lee, LG Display Wearing the Future ‒ Advancements in small display technologies Jeremy Lock, Sharp Devices Europe Author Interviews (20 min) Planning and Integration of projected capacitive touch systems Frank Ploenissen, MSC Technologies The Future of Capacitive Touch in Mission Critical Applications Chris Ard, Touchnetix The future of resistive touch panel – EOL vs. economic alternative Dr. Hagen Ploog, admatec Mechanical Integration of Touch Screens ‒ Challenges and Solutions Mathias Bünte, Bopla Gehäuse Systeme Implementation of an Adaptable Touch Control System for the Home Electrical Appliances Hüseyin İlker Turgut, Vestel Electronics www.electronic‐displays.de Program is subject to change electronic displays Conference 2015 Thursday, 26 February 2015 09:00 ‐ 09:20 Session 5: OLED Session 6: HMI/GUI Market trends in OLED displays Dr. Guillaume Chansin, IDTechEx Prototype Achievement and Further Challenges of Digitally Driven AMOLED Displays Pascal Volkert, Saarland University
New methods for optical characterization of OLED displays Dr. Pierre Boher, ELDIM 10:00 ‐ 10:40 Author Interviews & Coffee break (20 min + 20 min) Usability Testing: Why? When? How? Dr. Peter Rößger, TES Electronic Solutions To See or not to See – Innovative Display Technologies as Enablers for Ergonomic Cockpit Concepts Prof. Klaus Bengler, TUM The Secret to Mass‐Market GUIs Jason Williamson, Altia 10:40 ‐ 11:00 Session 7: Automotive 1 Session 8: Display Systems de‐Zign ‒ electronic display with zero‐energy consumption Michael Tittel, dresden elektronik verkehrstechnik 11:40 ‐ 13:00 Increasing the Perceived Grey Value Resolution by Combining Frame Rate Control and Error Diffusion to Reduce Visible Artifacts in Local Dimming Applications Dr. Jan Bauer, Daimler APIX ‒ the bridge to enable latest UHD Displays in the Car Jochen Schyma, Inova Semiconductors Measurement variation within automotive display assessments Claire White, University of Warwick Author Interviews & Lunch break (20 min + 60 min) Session 9: Automotive 2 Session 10: Interfaces & Driving 13:00 ‐ 13:20 Automotive T‐CON's, Custom ASIC's or standard Devices? Manfred Wittmeir, Epson Europe Electronics De‐Mystifying High Resolution Video processing using all programmable SoCs Dan Isaacs, Xilinx 13:20 ‐ 13:40 Automotive mission profile meets display Dr. Henning Oest, Robert Bosch Phase Only Holographic Head Up Displays Dr. Jamieson Christmas, Two Trees Photonics Author Interviews & Coffee break (20 min) DisplayPort ‒ the next generation graphics interface Rudolf Sosnowsky, HY‐LINE Computer Components t.b.d. Mario Klein, NXP edC Student Paper Award Session 11: Displays – Market Outlook 14:30 ‐ 15:00 Keynote: Liquid Crystals materials: Enabler for smart applications beyond displays 15:00 ‐ 15:20 t.b.d. 15:20 ‐ 15:40 The DFF migrates to the DFF e.V. 15:40 ‐ 16:00 Wrap‐up, Summary & Author Interviews (10 min + 10 min) 09:20 ‐ 09:40 09:40 ‐ 10:00 11:00 ‐ 11:20 11:20 ‐ 11:40 13:40 ‐ 14:00 14:00 ‐ 14:20 14:20 ‐ 14:30 www.electronic‐displays.de When information matters Ari Tervonen, Beneq Products Stretched TFT für die Bahnindustrie Werner Malcherek, ANNAX information systems Dr. Johannes Canisius, Merck Sweta Dash, IHS Dr. Franz Schneider, Dr. Schneider Consulting Prof. Dr. Karlheinz Blankenbach, Pforzheim University of Applied Science Program is subject to change electronic displays Conference 2015 Contact: Ms. Martina Roth Email: MRoth@weka‐fachmedien.de Phone: + 49 (0) 89 – 255 56 1155 Fax: + 49 (0) 89 – 255 56 0155 Registration Fill in, send, take part. Please note: In order to be registered you have to fill in all required fields marked with an asterisk *. (A confirmation email will be sent to you) ______________________________________________________________________________ Last Name * First Name * electronic displays Conference 2015
Mr./Ms./Title * Conference Fees ______________________________________________________________________________ Job title Company Student (yes/no) ______________________________________________________________________________ Street * Department ______________________________________________________________________________ Zip code * City * Country * ______________________________________________________________________________ Email * I want to register for: *  Full Conference (25‐26 February 2015)  Only first Conference Day (25 February 2015)  Only second Conference Day (26 February 2015) Day 1 – 25 February 2015 Day 2 – 26 February 2015  Session 1: Optical (Touch) Optimization  Session 2: Measurements  Session 3: LCD Performance Optimization  Session 4: Touch Screens  Session 5: OLED  Session 6: HMI/GUI  Session 7: Automotive 1  Session 8: Display Systems  Session 9: Automotive 2  Session 10: Interfaces & Driving  Session 11: Displays ‒ Market Outlook  My company is exhibiting  I am a Co‐Speaker Date * Signature * Full Conference (25‐26 February 2015) 495,00 € 545,00 € Only first Conference Day (25 February 2015) 335,00 € 385,00 € Only second Conference Day (26 February 2015) 335,00 € 385,00 € Students (25‐26 February 2015) (excl. lunch) 49,00 € 49,00 € Terms and Conditions: 1. The attendance fee includes proceedings, admission to embedded world Exhibition, lunch and refreshments. You will receive a confirmation of your registration along with your invoice. 2. Cancellation received in writing before or on 4 February 2015 will be subject to a service charge of EUR 50 for one‐day registrations and EUR 100 for two‐day registrations. For all cancellations received after 4 February 2015 the full conference fee remains payable. Substitutions within the same company are welcome at any time. 3. The organizers reserve the right to make changes in the program and/or speakers or to cancel sessions if conditions beyond its control prevail. Please check www.electronic‐displays.de for the latest conference information. 4. Students Conference fee: EUR 49 (incl. proceedings and exhibition ticket, excl. lunch voucher), student ID required. Please email to MRoth(at)weka‐fachmedien.de. 5. Exhibitors or Co‐Speakers will receive a discount of 50% for one person only. 6. On‐site‐registration: Please register in advance. For on‐site registrations a surcharge of EUR 40 per attendee will apply. All prices excluded VAT. Venue: NürnbergMesse, Messezentrum, NCC Ost, 90471 Nuremberg, Germany ______________________________________________________________________________ from Jan 28 Phone by Jan 27 80636 Munich, Germany
Please send Fax‐Registration to + 49 (0) 89 – 255 56 0155 or register online at www.electronic‐displays.de