Product Catalog Emergency Responder

Transcription

Emergency Responder
Product Catalog
About Bullard
Bullard is an internationally known manufacturer
of high-quality personal protective equipment and
systems designed to help save lives. Serving workers
in the fire service and law enforcement markets,
Bullard is a leader in manufacturing thermal imaging
cameras and firefighter and rescue helmets.
Market Leader
Bullard has remained a manufacturing leader in
its markets for more than 114 years. The Company
maintains its competitive edge through advanced
engineering technology, adopting the principles of
‘lean’ manufacturing, and offering value-added services.
In addition, Bullard utilizes cross-functional teams to
develop the most sophisticated, technologically advanced
products designed with worker safety in mind.
Bullard introduced its first high-resolution thermal imager
to the fire service market in 1998 with the innovative
Bullard TI. This breakthrough in thermal imaging
technology quickly secured Bullard’s market position as
the industry’s leading thermal imaging manufacturer. In
2003, Bullard introduced its T3 Thermal Imager as the first
palm-size, lightweight imager offering innovative features
including the Electronic Thermal Throttle® and Super Red
Hot colorization.
We are a Company that knows the specific needs of the
fire service. Bullard Thermal Imagers and Fire and Rescue
Helmets reflect that knowledge and experience. With
Bullard products, you’ll find the ultimate in toughness and
durability. You’ll also find extraordinary service and the
most innovative designs.
Three years later, Bullard introduced its state-of-the-art
T4 Thermal Imager with its ultra-high resolution infrared
engine, widescreen display, digital zoom, Electronic
Thermal Throttle, Super Red Hot colorization and superior
clarity. Bullard introduced the Eclipse® in 2009 as the
industry’s first low-cost, lightweight, personal-issue
thermal imager designed for every firefighter. In 2012,
the Eclipse® LD was launched. The Eclipse LD combines
the compact, sleek Eclipse design with a state-of-the-art
thermal imaging engine and the latest Liquid Crystal
Display technology on a large 3.5” screen. Bullard
Thermal Imagers are built ‘Bullard Tough’ with durability,
reliability, and usability.
Fire Helmets
Innovation
Bullard entered the fire service market with the introduction
of its first fire helmet in 1930. Since then, Bullard has led
the market in product safety with the development of the
first fiberglass fire helmet in 1947, followed by the first
NFPA-approved thermoplastic fire helmet in 1983, and a
new helmet that incorporated a non-slip ratchet suspension
with a knob in the back for simple sizing. In 2009, Bullard
introduced TrakLite®, the industry’s first integrated helmet
lighting system that blends engineering, functionality, and
safety to help firefighters see forward in dark or smoky
conditions. Bullard offers a full line of fiberglass and
thermoplastic helmets for Structural, Air Rescue, Rescue,
and Wildland applications.
2
Thermal Imagers
Today, Bullard continues to lead the industry with innovative
thermal imaging products and accessories designed
specifically to meet the needs of firefighters. The Bullard T4N
is the newest thermal imager from Bullard offering the latest
in thermal imaging advancements while meeting all of the
requirements of NFPA 1801, Standard on Thermal Imagers
for the Fire Service, 2013 Edition. Bullard offers thermal
imagers that meet the needs of every fire department with its
Eclipse®, T3, and T4 Series thermal imagers.
877-BULLARD (285-5273) • INTERNATIONAL CALLS +1-859-234-6616
Contact & Ordering
Information
Contact & Ordering
Information
Now there are more ways than ever to place an
order with Bullard!
Fax
Y ou can fax us any time – 24 hours a day. Faxed orders
are processed promptly, and you will receive a Sales
Order Confirmation back after the order has been
entered into our system.
Toll-Free Fax Number: 1-800-877-6858
Local Fax Number: 1-859-234-6858
E-mail
E-mail your orders to [email protected].
EDI
T ransaction sets are received as soon as they are sent, so
the response turnaround is almost immediate. You can even
use your own part numbers! Contact [email protected] if
you wish to become an EDI partner. NOTE: There is a $100
purchase order minimum.
Mail
S end orders via mail to Bullard Customer Service if you
have an account set up with us. The mailing address for
Bullard is below.
In Person
Y our Bullard Regional Sales Manager will visit your facility
and listen to your needs. They can help you decide on
the combination of safety products that will best serve
you and provide a quote, technical information, product
availability, and ordering information.
C all us anytime between 8:00 a.m. and 6:00 p.m. EST,
Monday through Friday, and one of our experienced
Customer Service Representatives will assist you with
placing your order. Special order requirements? Just
contact a Bullard Customer Service Representative to
discuss the options. We do not take orders over the phone;
you must e-mail or fax a copy of the purchase order.
Don’t Forget to Visit Us Online!
Check out our website and follow us on Facebook
and YouTube.
www.bullard.com
www.facebook.com/BullardCompany
www.facebook.com/BullardER
www.facebook.com/BullardIHS
www.youtube.com/BullardTV
Americas:
Bullard
1898 Safety Way
Cynthiana, KY 41031-9303
Toll-free within USA:
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987
Europe:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen
Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
www.bullard.com
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176
3
Table of Contents
4
Table of
Contents
About Bullard................................................................................................................................... 2
Contact & Ordering Information......................................................................................................... 3
Thermal Imaging......................................................................................................................... 5-52
Thermal Imagers: Fire Service................................................................................................ 5-14
T4MAX..................................................................................................................................6
T4N......................................................................................................................................7
T320....................................................................................................................................8
T3MAX..................................................................................................................................9
Eclipse® LD......................................................................................................................... 10
Eclipse®............................................................................................................................. 11
TI Spotlight: Electronic Thermal Throttle®................................................................................ 12
TI Spotlight: Super Red Hot................................................................................................... 13
TI Spotlight: Save-A-Life Program........................................................................................... 14
Thermal Imagers: Law Enforcement........................................................................................15-20
Edge™................................................................................................................................ 16
TacSight® SE35.................................................................................................................... 17
TI Spotlight: White-Hot/Black-Hot/Nocturnal Mode................................................................... 18
TI Spotlight: SOAR Program................................................................................................... 19
TI Spotlight: Service, Training & Warranty................................................................................ 20
Thermal Imagers: Accessories & Parts....................................................................................21-52
Replacement Parts Reference Table..................................................................................... 22-23
Transmitter, Receiver & DVR.............................................................................................. 24-26
Accessories.................................................................................................................... 27-30
Kits & Bundles................................................................................................................ 30-32
Extended Warranties........................................................................................................ 32-35
Upgrades....................................................................................................................... 36-38
Replacement Parts........................................................................................................... 39-47
Retired Thermal Imager Accessories & Parts......................................................................... 48-52
Fire & Rescue Helmets...............................................................................................................53-128
Structural Fire Helmets.........................................................................................................53-84
UST Series...................................................................................................................... 54-57
UST Series Accessories & Replacement Parts........................................................................ 58-64
FH Spotlight: NFPA Standards................................................................................................. 65
FX Series................................................................................................................... 66-67, 70
PX Series....................................................................................................................... 68-70
FX/PX Series Accessories & Replacement Parts..................................................................... 71-76
FH Spotlight: What Goes Into a Bullard Fire Helmet?.................................................................. 77
LT Series........................................................................................................................ 78-80
LT Series Accessories & Replacement Parts.......................................................................... 81-84
Air Rescue/Fire Fighting Helmets..........................................................................................85-91
AX................................................................................................................................ 86-89
AX Accessories & Replacement Parts................................................................................... 90-91
Wildland Fire Helmets........................................................................................................92-100
Wildfire® Series............................................................................................................... 93-95
Wildfire® Series Accessories & Replacement Parts................................................................96-100
Rescue/ER Fire Helmets....................................................................................................101-112
USRX.......................................................................................................................... 102-103
USRX Series Accessories & Replacement Parts................................................................... 104-107
Advent® Series............................................................................................................ 108-109
Advent® Series Accessories & Replacement Parts............................................................... 110-112
European Style Fire Helmets.............................................................................................113-114
Magma™ Series Accessories & Replacement Parts..................................................................... 114
Helmet Ornamentation.....................................................................................................116-124
Leather Front Styles...................................................................................................... 116-118
Leather Front Badges & Decals............................................................................................. 119
Scotchlite® Letters & Numbers............................................................................................. 120
Front Decals................................................................................................................ 121-122
Crescent Lettering.............................................................................................................. 123
Ceremonial Plaques............................................................................................................. 124
Body Temperature Protection............................................................................................125-127
Index....................................................................................................................................129-131
877-BULLARD
Thermal Imagers:
Fire Service
Thermal Imagers:
Fire Service
In This
Section
•
•
•
•
•
•
877-BULLARD
T4MAX
T4N
T320
T3MAX
Eclipse® LD
Eclipse®
T4MAX
Thermal Imaging
T4MAX
The T4MAX Thermal Imager delivers unrivaled
performance and image quality on the industry’s
largest, brightest viewing display. Equipped with
Technology Optimization Package (T.O.P.) offering
greatly enhanced engine and display performance
integration, the T4MAX is the ultimate choice for
firefighting thermal imaging.
highlights:
•
•
•
Super-bright display enables viewing in thick smoke
and direct sunlight
450:1 Contrast Ratio emphasizes deep blacks, bright
whites, and enhances image detail
Palm-size thermal imager
•
•
•
•
•
Direct charge system for use with vehicle mounted charger
Battery charger with AC adaptor
Combination wrist strap and gear strap
Carrying case
Product orientation CD-ROM with SmartLine training


features:

4.3” widescreen format Liquid Crystal Display
Technology Optimization Package (T.O.P.)
Ultra-high 320 x 240 resolution
16 x 9 display aspect ratio
Super Red Hot Colorization
Electronic Thermal Throttle®
Relative heat indicator for surface temperature measurement
8. 2x and 4x digital zoom
9. Two 10 Volt NiMH rechargeable batteries
10. Standard housing color is Metallic Blue

1.
2.
3.
4.
5.
6.
7.



6

Available accessories:
REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 25-26):
SS, SSTRANS2, SSTRANS2UPGRADE, SSUPGRADE,
T3TRANSONLY2, T3TRANSUPGRADE
(See table on p 22-23)
Receivers (p 24-25):
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE
(p 31)
T4MAXBUNDLE, T4MAXBUNDLESS
Additional Accessories (p 27-29):
ACINVERTER, Hardcase, POWERHOUSE, POWERHOUSEKIT,
T3ALK, T3HANDLE, T3RETRACT, T4GLARESHIELD
available warranties:
Standard Color:
UPGRADE Colors:
Metallic Blue
Black
Kits & bundles:
(p 32-35)
T4MAXEXT, T4MAXEXT2, T4MAXCF, T4MAXCFAM
White
Red
Orange Lime-yellow Yellow
Blue
Thermal Imaging
T4N
T4N
Meeting all requirements of NFPA 1801-2013, the
T4N gives you the extra assurance of maximum
durability and performance. With all these
benefits, the T4N is the ultimate choice for
firefighting thermal imaging.
highlights:
•
•
•
Super-bright display enables viewing in thick smoke
and direct sunlight
450:1 Contrast Ratio emphasizes deep blacks,
bright whites, and enhances image detail
NFPA 1801-2013-compliant
Class I, Division 2 rated for use in hazardous locations
Two operational modes: BASIC and BASIC PLUS (for
full feature performance)
Intuitive and easy battery change
•
•
•
•



features:
1.
2.
3.
4.
5.
6.
7.
4.3” widescreen format Liquid Crystal Display
Technology Optimization Package (T.O.P.)
Ultra-high 320 x 240 resolution
16 x 9 display aspect ratio
Relative heat indicator and numeric indicator for surface temperature measurement
8. 2x and 4x digital zoom
10. Standard housing color is Black







Available accessories*:
REPLACEMENT PARTS:
(p 31)
T4NBUNDLE, T4NBUNDLESS
ACINVERTER, hardcase, POWERHOUSE, POWERHOUSEKIT,
T3ALK, T3HANDLE, T3RETRACT, T4GLARESHIELD
Kits & bundles:
*Attachable accessories are not NFPA 1801-2013-compliant.
(p 32-35)
T4NEXT, T4NEXT2, T4NCF, T4NCFAM
Standard Color:
UPGRADE Colors:
Black
White
www.bullard.com
Red
Orange
Lime-yellow
Yellow
Blue
7
T320
Thermal Imaging
T320
The T320 offers ultra-high resolution 320x240
performance in a “Back to Basics” one button
format or with Bullard’s exclusive Electronic
Thermal Throttle® feature. The 320x240
resolution provides crisp, clear images, critical for
analyzing complex fire scenes. For a balance of
the highest-performance features and imagery in
a small form factor, T320 is the ultimate choice.
highlights:
•
•
•
Lightweight, palm-size thermal imager
Single button operation (standard configuration)
Direct charge system for use with Powerhouse
vehicle mounted charger
•
•
•
•
Battery charger with AC and DC adaptors
Carrying case


features:
3.5” Liquid Crystal Display
Ultra-high 320 x 240 resolution detector
Relative heat indicator for surface temperature measurements
6. OPTIONAL Electronic Thermal Throttle® (T320TT)
7. Standard housing color is Yellow


1.
2.
3.
4.



8
REPLACEMENT PARTS:
(p 30-31)
T320BUNDLE, T320TTBUNDLE, t320bundless, t320ttbundless
T3ALK, T3GLARESHIELD, T3HANDLE, T3RETRACT
Kits & bundles:
(p 32-34)
T320EXT, T320EXT2, T320TTEXT, T320TTEXT2
Standard Color:
UPGRADE Colors:
Yellow
Black
White
Red
Orange
Lime-yellow
Blue
Thermal Imaging
T3MAX
T3MAX
T3MAX is an extremely versatile small form thermal
imager for fire departments that demand high
performance thermal imaging on a budget. The
standard one-button model is suited for interior
operations, while the addition of the Electronic
Thermal Throttle® makes T3MAX a powerful
analytical tool. T3MAX is the ideal thermal imager
for departments that want complete versatility at
an affordable price.
highlights:
•
•
•
Lightweight, palm-size thermal imager
Single button operation (standard configuration)
Direct charge system for use with Powerhouse
vehicle mounted charger
•
•
•
•
Carrying case



features:
160 x 120 resolution detector
Relative heat indicator for surface temperature measurements
6. OPTIONAL Electronic Thermal Throttle® (T3MAXTT)
7. Standard housing color is Red

1.
2.
3.
4.



REPLACEMENT PARTS:
(p 31-32)
T3MAXBUNDLE, T3MAXTTBUNDLE, t3maxbundless, t3maxttbundless
T3ALK, T3GLARESHIELD, T3HANDLE, T3RETRACT
Standard Color:
Red
Kits & bundles:
(p 34-35)
T3MAXEXT, T3MAXEXT2, T3MAXTTEXT, T3MAXTTEXT2
UPGRADE Colors:
Black
www.bullard.com
White
Orange
Yellow
Lime-yellow
Blue
9
Eclipse® LD
Thermal Imaging®
Eclipse LD
Eclipse® LD combines the compact, sleek Eclipse®
design with powerful performance on a large-sized
display. Infused with a state-of-the art thermal
imaging engine and the latest Liquid Crystal
Display technology, Eclipse® LD shines in the
harshest, darkest environments. With Eclipse® LD,
you’ll lose the bulk without missing a thing.
highlights:
•
•
•
Lightweight, at only 2 lbs
Combines large display and compact design
Direct charge system for use with Eclipse®
Powerhouse vehicle mounted charger
•
•
•
myBullard™ personal control panel

features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
160 x 120 resolution or upgrade to 320 x 240
Super lightweight and ultra small form
More than 1000°F saturation temperature
One 2.4 Volt NiMH battery
Customizable startup graphic
OPTIONAL Electronic Thermal Throttle®
OPTIONAL surface temperature measurement
OPTIONAL Super Red Hot Colorization
OPTIONAL SceneCatcher DVR
Standard housing color is Red

  






Kits & bundles:
Digital Video Recorders (p 24):
ECLLDSS
(p 30)
ECLLDBUNDLE
Additional Accessories (p 27):
ACINVERTER, ECLGLARESHIELD, ECLPOWERHOUSE, ECLRETRACT
REPLACEMENT PARTS:
(p 32-33)
ECLLDEXT, ECLLDEXT2, ECLldcf, eclldcfbundle, eclldcfam
Standard Color:
Red
10
UPGRADE Colors:
Black
White
Orange
Yellow
Lime-yellow
Blue
Eclipse®
Thermal Imaging
Eclipse
Eclipse® 160
Eclipse®
®
Eclipse® is designed to equip each firefighter
with thermal imaging technology. Shattering
price barriers, Eclipse® gives fire departments
of all sizes the opportunity to bring thermal
imaging to more firefighters. With Eclipse®, no
one is left in the dark.
highlights:
•
•
•
Ultra-lightweight at 1.5 lbs
Sleek and compact design
Eclipse® control panel software
•
•
•
 

features:
1. 2.4” Liquid Crystal Display
2. 80 x 60 resolution (Eclipse®) or upgrade to
160 x 120 (Eclipse® 160)
3. Super lightweight and ultra small form
4. More than 1000°F saturation temperature
5. One 2.4 Volt NiMH battery
6. Customizable startup graphic
7. OPTIONAL Electronic Thermal Throttle®
8. OPTIONAL surface temperature measurement
9. OPTIONAL High Heat Colorization
10. Standard housing color is Red







Kits & bundles:
(p 27):
(p 30)
ECLBUNDLE
REPLACEMENT PARTS:
(p 32-33)
ECLEXT, eclcf, eclcfbundle, eclcfam
Standard Color:
Red

UPGRADE Colors:
Black
www.bullard.com
White
Orange
Yellow
Lime-yellow
Blue
11
TI Spotlight
Thermal Imaging
Spotlight
Electronic
thermal throttle®
Pinpoints Hot Spots; Highlights the Hottest Objects
Inside the Thermal Imager
The patented Electronic Thermal Throttle® from
Bullard greatly improves the usability of thermal
imagers in overhaul. Because the sensitivity of the
imager is automatically controlled by the circuitry
inside the TI, the fact that the user has no control
over its adjustment has traditionally made overhaul
difficult. Most thermal imagers change sensitivity
when they view areas of significant heat. In a fire
room, post-knockdown, the software is unable to
select the proper sensitivity level for the heated
room. As a result, traditional thermal imagers have
shown the room with an over-abundance of white, or
as many areas of gray. Firefighters could not easily
pinpoint areas of concern.
Colorization
The Electronic
Thermal Throttle®
solves this
dilemma. When
the firefighter uses
Electronic Thermal
Throttle®, the
thermal imager
paints the hottest
objects in the scene blue, leaving other hot objects
white. By holding down the proper switch, the
temperature for blue colorization is lowered and more
objects are painted blue. The hottest items are dark
blue, with lighter shades of blue representing slightly
cooler items.
This blue colorization can help a firefighter identify
which portion of a wall is hotter than the rest,
enabling him to focus his initial overhaul efforts. The
feature can also help a firefighter identify fluorescent
light ballasts or other electrical equipment that
is overheated and causing an odor of smoke. By
highlighting the heat from a human, it stands out
from the background heat of the area being searched.
Electronic Thermal Throttle® might also help rescuers
involved in an exterior search and rescue operation.
Electronic Thermal Throttle® comes standard on the
T4 Series and as an option for the T3 and Eclipse®
Series thermal imagers.
12
Spotlight
Super Red Hot
Determines Heat Conditions; Helps You Identify
Dangerous Temperatures
Inside the Thermal Imager
Bullard first introduced Red Hot Colorization in 2000.
Since then, colorization has become common on higher
performance microbolometer-based thermal imagers.
Super Red Hot uses three color levels to help firefighters
identify dangerous temperatures. The software that creates
these colors also incorporates special logic that allows it
to shade in and show details behind the color. As a result,
it is one of the few colorization systems that actually
gives depth and texture to the image, allowing firefighters
to see structural details within the area being colored. In
short, the color in Super Red Hot from Bullard does not
obscure details like some other color systems.
Colorization
Bullard Super Red Hot
uses yellow, orange,
and red colors to
indicate increasing
levels of heat (and
danger). Objects that
the thermal imager
estimates at 500ºF
(260ºC) or hotter
are colored in shades of yellow. At 800ºF (427ºC), the
thermal imager begins to color objects shades of orange
instead of yellow. The orange transitions to red at 1,000ºF
(538ºC), and any object over about 1,120ºF (600ºC) will
be solid red. During fire suppression, in situations where
the seat of the fire is not easily identified, the Super Red
Hot system should colorize the greatest density of fire as
red. This can help with hose placement, as well as proper
aiming of streams.
TI Spotlight
Thermal Imaging
While the thermal imager normally only sees surface
temperatures, superheated gases have special properties
that make them visible on a thermal imager. Previously,
users of microbolometers had to look for faint white
clouds in the thermal image to determine where the
thermal layer may be. Since these gases frequently give a
high heat signature to the TI, the Super Red Hot feature
will normally colorize thermal layers in shades of yellow or
orange. This can help new users or less experienced users
identify the thermal layer more rapidly, and potentially
make better decisions about how far to advance or how
quickly to ventilate a structure.
Temperatures indicated by the Super Red Hot Colorization
are estimations, as with the relative heat indicator. A
number of factors, most importantly the type of material,
affect the accuracy of the estimation. In general, if you
can “see” a gas layer on your TI, even if it is white and
not colorized, treat it as a superheated layer. Super Red
Hot comes standard on the Bullard T4 and T3 Series
thermal imagers and as an option on Eclipse® Series
thermal imagers.
www.bullard.com
13
TI Spotlight
Thermal Imaging
Spotlight
Save-a-life club
The Bullard Save-A-Life Club is a reward and
recognition program for firefighters who save a
civilian life or escape a life-threatening situation
while using a Bullard Thermal Imager.
Fire departments inducted into the Bullard Save-A-Life
Club are honored with a local award ceremony, at which
rescuers receive distinctive military-style medals
mounted in personalized display boxes, along with
service ribbons, certificates, and uniform patches
that commemorate the life-saving event. Department
leaders, local funding leaders, and TI trainers receive
personalized recognition gifts as well. Members of the
local media are invited to cover the event.
If firefighters in your department have saved a life
while using a Bullard TI, be sure to submit your story
for proper recognition.
Visit www.bullard.com to submit a nomination, see a
list of previous recipients, and find more information.
14
Thermal Imagers:
Law Enforcement
Thermal Imagers:
Law Enforcement
In This
Section
• Edge™
• TacSight® SE35
www.bullard.com
Thermal Imaging
Edge™
Edge
™
Any thermal imager can detect heat and potential
threats. Edge™ just makes it easy. Engineered
with the latest infrared technology and useful, yet
intuitive, features, Edge™ gives you the details
without distracting complexity. Sleek ergonomics
and the arms-length viewable display are designed
to facilitate how you work.
highlights:
•
•
•
•
Ultra-lightweight at only 1.5 lbs
Sleek and compact design
Battery charger with AC adaptor and AC invertor for
in-vehicle charging
•
•
Pelican™ hard carrying case with unconditional
lifetime guarantee
myBullard™ personal control panel

features:



1. 2.4” Liquid Crystal Display
2. 80 X 60 resolution (Edge™) or upgrade to 160 X 120 (Edge™ 160)
3. Super lightweight and ergonomically designed
4. 20° field of view
5. Display Dimming/Display Off Mode
6. Video Polarity (White-Hot/Black-Hot/Nocturnal)
7. Fixed Focus, Auto Gain
8. Two 2.4 Volt NiMH batteries



(p 27):
(p 33)
EDGEEXT, EDGEEXT2

REPLACEMENT PARTS:
16
Thermal Imaging
TacSight SE35
®
TacSight® SE35
The TacSight® SE35 offers the best image quality in
the industry. It detects extremely small differences
in temperature so officers can distinguish people
from their immediate surroundings. You’ll find
optimal visibility and advanced features like 4x
digital zoom, Reverse Polarity, and Variable Focus
with the TacSight® SE35.
highlights:
•
•
•
•
•
Superior image quality for surveillance operations
Powerful standard features
1000 meter human detection
Battery charger with AC adaptor and AC inverter for
in-vehicle charging
•
•
Shoulder strap
Pelican™ hard carrying case with unconditional
lifetime guarantee

features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Human detection at 1000 meters
13° field of view
320 x 240 resolution
Display Dimming/Display Off Mode
Reverse Polarity - “white hot” to “black hot”
Image enhancement button
Variable Focus
2x and 4x digital zoom
Two 10 Volt NiMH rechargeable batteries








REPLACEMENT PARTS:
HANDLETRANSONLY2, HANDLETRANSUPGRADE, TACSS, TACSSTRANS2,
TACSSTRANS2UPGRADE, TACSSUPGRADE
(p 32)
TACSIGHTSE35KIT, TACSIGHTSE35KIT2
HANDLE, HARDCASE, RCN17ALK, T3GLARESHIELD, T3RETRACT,
TACPORT, TACSCOPE
Kits & bundles:
(p 33)
SE35EXT
www.bullard.com
17
Thermal Imaging
TI Spotlight
Spotlight
White-Hot,
Black-Hot &
Nocturnal MODE
Edge™ can be switched from the standard
white-hot polarity to black-hot polarity.
Powerful, Intuitive Operation
The reverse polarity feature of the Edge enables
officers to quickly adjust the thermal image to
display the maximum detail. Switching polarity can
help reveal scene details depending on the situation
and environment. Officers have the option to toggle
between White-Hot and Black-Hot Modes to select the
setting that offers the optimal display.
White-Hot Mode
When activating the unique Nocturnal Mode, which colors
the image red, users’ eyes adjust faster when looking
away from the display in low light conditions, allowing
officers to quickly acclimate to the environment.
Black-Hot Mode
Nocturnal Mode
18
Thermal Imaging
Save or apprehension
recognition Program
The Bullard SOAR (Save or Apprehension
Recognition) Program is a reward and recognition
program for law enforcement officers who have
apprehended a felon or suspect or have saved the
life of a civilian or fellow officer while using a
Bullard Thermal Imager.
TI Spotlight
Spotlight
Law enforcement agencies inducted into SOAR are
honored during a local award ceremony, where officers
receive distinctive challenge coins mounted in
presentation cases to commemorate the effectiveness
of using a Bullard Edge™ or TacSight® Thermal Imager
in an incident. Members of the local media are invited
to cover the event.
Visit www.bullard.com to submit a SOAR application
for recognition, see a list of current members, and
find more information.
www.bullard.com
19
Thermal Imaging
TI Spotlight
Spotlight
Service, training &
warranty
Bullard Service Commitment
Since Bullard introduced its first thermal imager in 1998,
the Company has been earning the respect and trust of
its customers through its commitment to excellence in
service. All thermal imaging customers who send their
products in for service or maintenance will receive:
• Up-front pricing
• 48-hour turnaround
• Complete system diagnostics
• Free inbound and outbound shipping
• A lifetime warranty for shell replacements
Bullard Service Approach
The Bullard Service Program consists of several elements:
• Simple pricing based on market price tiers,
communicated to the customer before the product is
sent to Bullard
• Pre-authorization of all TI service returns, for
transaction efficiency and speed of turnaround
• E-mail communication to customer upon repair
delivery and pickup from Bullard
• Prepaid inbound and outbound shipping for all
thermal imagers, regardless of warranty status
• Complete system diagnostics on every camera serviced
• Complimentary replacement of straps and display
cover window on all repairs
• Lifetime warranty for shell replacements
and law enforcement officers in a full-time training
capacity. These experienced trainers consistently offer
instructional materials that aid users in their applications.
With your new Bullard Thermal Imager, your department
can receive hands-on training, classroom thermal imaging
education, helpful take-away materials, and informative
question-answer sessions. Bullard thermal imaging
training is more than simple how-to instructions. It’s
real-life, interactive, and customized for the needs of
your department.
Visit www.bullard.com to find training articles, lessons
learned, and other training resources.
Warranty
Bullard provides multiple warranty options for departments
to consider. Bullard’s standard warranty covers all thermal
imagers and certain features and accessories for a period
of one year, and the limited lifetime housing warranty
guarantees the thermal imager outer shell for the life of
the imager. Additionally, Bullard’s exclusive CareFree™
warranty provides five-year coverage for select thermal
imagers and batteries. Conditions and exclusions apply.
For details on Bullard’s available warranties and their
terms and conditions, go to www.bullard.com/TIwarranty
Keeping Your TI in Top Condition
The Preventative Maintenance Program at Bullard allows
a fire department to return its thermal imager to “like
new” condition, replacing maintenance parts, providing a
complete diagnostic of the thermal imager, and replacing
the outer housing and straps. Especially for heavy users,
the Preventative Maintenance Program can restore the
water resistant integrity of the outer shell to help prevent
water from intruding into the electronics. In short, the
Preventative Maintenance Program enables you to catch
small problems before they become big problems. As with
repairs, Bullard offers 48-hour turnaround on preventative
maintenance. For more information, call 877-BULLARD.
TI Training
Bullard is committed to ensuring that thermal imager
users have the proper training to use thermal imaging
technology effectively. In fact, Bullard employs firefighters
20
Thermal Imagers:
Accessories & Parts
Thermal Imagers:
Accessories & Parts
In This
Section
•
•
•
•
•
•
•
•
21
Replacement Parts Reference Table
Transmitter, Receiver & DVR Options
Accessories
Kits & Bundles
Extended Warranties
Upgrades
Replacement Parts
Retired Thermal Imager Accessories
& Parts
www.bullard.com
887-BULLARD
Reference Table
BATTERYNIMH
BATTERYNIMHULTRA
BUMPERKIT
•
CARADAPTOR
•
CASEFOAM
•
•
•
•
ECLDATAPOWER
ECLGLARESHIELDLENS
ECLLCDGUARD
•
•
•
ECLLDPM
ECLLDWINDOW
ECLMETAL160
•
•
ECLMETAL320
ECLNIMHB
ECLPM
ECLWINDOW
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ECLLDLCDGUARD
ECLMETAL
•
•
•
CMDWINDOW
ECLDATACABLERED
•
•
•
CMDRCACABLE
ECLDATACABLE
•
•
•
•
•
•
•
•
CMDPM
•
•
•
•
•
•
•
•
•
•
•
CMDKIT
ECLCHARGER20V
•
•
•
CMDDCCABLE
ECLBUMPER
•
•
CMDDATACABLE
DUALCHARGERBASE
Edge™
BATTERYKNOBS
TacSight®
SE35
•
•
TacSight®
S1/S2
•
•
TI
Commander
•
•
MX
•
•
LAW
TI/TIx
ACADAPTOR20V
T4 Series
ACADAPTOR
T3 Series
Part
Eclipse® LD
FIRE
Eclipse®
TI: Accessories &
Replacement Parts
Thermal Imagers: Replacement Parts
•
•
•
•
•
•
•
•
•
•
•
EDGEFRONT
EDGEHARDCASE
EDGEPM
LCDGUARD
MCCANTENNA
MLANTENNA
MLKNOB
22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reference Table
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MXPM
•
NFPANIMH
NIMH
OMNI
OMNIONLY
•
•
•
•
•
•
SHSTRAP
SINGLECHARGERBASE
SSUSB
STRAPKIT
STRAPSCREWS
T3CHARGER20V
T3COMBOSTRAP
T3GLARESHIELDCLIPS
T3GLARESHIELDLENS
T3NIMHB
T3PERSONALSTRAP
T3PM
T3PMKIT
T3SP
T3STRAPKIT
T3TRANSKNOB
T3WINDOW
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
T4LCDGUARD
T4PM
T4PMKIT
T4WINDOW
TACPM
TACPMKIT
TACSTRAPKIT
TACWINDOW
•
•
•
•
•
TIDCPOWERCORD
TIMXPMKIT
TIPM
TISP
TIWINDOW
WINDOWSCREWS
Edge™
TacSight®
SE35
•
TacSight®
S1/S2
•
TI
Commander
TI/TIx
•
MX
T4 Series
LAW
T3 Series
MLSTRAP
Eclipse® LD
Part
Eclipse®
FIRE
TI: Accessories &
Replacement Parts
•
•
www.bullard.com
•
•
•
•
•
23
TI: Accessories &
Replacement Parts
Thermal Imager
Transmitter, Receiver
& DVR
ECLLDSS
SceneCatcher 2.0 DVR for Eclipse® LD
•
•
Eclipse® LD SceneCatcher DVR
Not available for standard Eclipse®
HANDLETRANSONLY2
TacSight® 2-channel Wireless Remote Transmitter
•
•
•
•
Transmitter for TacSight® Series
Attachable/detachable 2-channel transmitter handle
Receiver not included
Transmit 2000 ft line of sight and 600 ft through typical construction
HANDLETRANSUPGRADE
TacSight® Transmitter Upgrade
•
Upgrade an existing TacSight® Series transmitter handle to an improved
performance, 2-channel transmitter: transmits 2000 ft line of sight and 600 ft
through typical construction
ML1
2-channel MobileLink
•
•
•
Battery operated receiver can monitor the scene from up to 600 ft (through
typical construction) on a 3.5” LCD display
Includes BNC/RCA video-out jack, battery, 20 Volt battery charger, and 20 Volt AC adaptor
Compatible with all Bullard TIs and many competitive models
ML2
2-channel MobileLink only
•
•
Same features as ML1
Does not include battery, 20 Volt charger, or 20 Volt AC adaptor
MLUPGRADE
2-channel MobileLink Upgrade
•
24
Upgrade an existing MobileLink handheld receiver for reception from 600 ft
through typical construction
& DVR
REC2
2-channel Receiver
•
•
•
Omni directional antenna with all necessary cables
Compatible with all Bullard 2-channel transmitting thermal imagers
Integrate wireless reception into your current video system
RECUPGRADE
2-channel Receiver Upgrade
•
TI: Accessories &
Replacement Parts
Thermal Imager
Upgrade an existing receiver box to an improved performance, 2-channel
receiver: 600 ft through ordinary construction
SS
SceneCatcher 2.0 DVR - Digital Video Recorder
•
•
•
•
640 x 480 resolution digital video recorder for T3 and T4 Series Thermal Imagers
Records up to five hours of video and hundreds of still images
USB 2.0 for lightning fast transfer speed
Seamless PC software interface (USB included)
SSUPGRADE
SceneCatcher 2.0 Upgrade
•
Upgrade an existing T3 or T4 Series SceneCatcher to the higher performance
SceneCatcher 2.0
SSTRANS2
SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
•
•
•
•
Same features as SS for T3 and T4 Series Thermal Imagers
2-channel wireless remote transmitter
Transmits 2000 ft line of sight and 600 ft through typical construction
Receiver purchased separately
SSTRANS2UPGRADE
•
•
•
Upgrade an existing T3 or T4 Series SceneCatcher to the higher performance
SceneCatcher 2.0 with a 2-channel wireless remote transmitter
www.bullard.com
25
TI: Accessories &
Replacement Parts
Thermal Imager
& DVR
TACSS
TacSight® SceneCatcher 2.0 DVR
•
•
•
•
TacSight® Series digital video recorder
Includes CD-ROM with instruction, download software, and data cable
Non-reflective decals
Records up to five hours of video and hundreds of still images
TACSSUPGRADE
TacSight® SceneCatcher Upgrade
•
Upgrade an existing TacSight® Series SceneCatcher to the higher performance
SceneCatcher 2.0
TACSSTRANS2UPGRADE
•
•
•
Upgrade an existing TacSight® SceneCatcher to the higher performance
SceneCatcher 2.0 with a 2-channel wireless remote transmitter
TACSSTRANS2
TacSight® SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
•
•
•
Same features as TACSS
2-channel Wireless Remote Transmitter
T3TRANSONLY2
2-channel Wireless Remote Transmitter
•
•
•
Transmitter for T3 and T4 Series Thermal Imagers
T3TRANSUPGRADE
Transmitter Upgrade
•
26
Upgrade an existing T3 or T4 Series transmitter handle to an improved performance,
2-channel transmitter: transmits 600 ft through ordinary construction
Accessories
ACINVERTER
AC Power Inverter, 75 Watt, For Use with Bullard Thermal Imagers
•
•
Use with 12 Volt cigarette lighter socket
Converts 12 Volt DC battery power to 120 Volt AC power
ECLGLARESHIELD
Glare Shield for Eclipse® and Edge™ Thermal Imagers
•
Provides maximum visibility during size-up and other bright conditions
TI: Accessories &
Replacement Parts
Thermal Imager
ECLPOWERHOUSE
Vehicle Mounted Direct Charge System, NFPA 1901 Compliant
•
•
Charges Eclipse® Series and Edge™ Thermal Imagers and includes a spare battery
Hardwire installation ready and AC/DC connectivity
eclretract
Retractable Strap
•
•
Works with Eclipse® Series and Edge™ Thermal Imagers
Extendable lanyard designed to keep the thermal imager out of the way while
working or crawling, yet be easily accessible when needed
ECLPOWERUP
PowerUp Charger, Analyzer, and Conditioner for Eclipse® and Edge Series Thermal Imagers
•
•
Charges, analyzes, and conditions batteries for optimal performance
Works in conjunction with myBullard® personal control panel software
ECLPOWERUPUPGRADE
PowerUp Charger, Analyzer, and Conditioner - Upgrade
•
Same as ECLPOWERUP but upgrades standard desktop charger to PowerUp
with new Thermal Imager purchases
HANDLE
Thermal Imager Handle for TacSight® Series Thermal Imagers
•
•
Does not include transmitter
Non-reflective labels
HARDCASE
Thermal Imager Carrying Case for T3, T4, and TacSight® Series Thermal Imagers
•
•
Pelican™ case with unconditional lifetime guarantee
Also holds Transmit Handle, MobileLink, Tacport, charger, and two batteries
www.bullard.com
27
TI: Accessories &
Replacement Parts
Thermal Imager
Accessories
POWERHOUSE
T3 or T4 Vehicle Mounted Direct Charge System •
•
•
•
Charges T3 and T4 Series Thermal Imagers as well as a spare battery
Hardwire installation ready
Attachment hardware
NFPA 1901 compliant
POWERHOUSEKIT
Mounted Direct Charge System
•
•
•
•
For T3, T4, and TacSight® Series Thermal Imagers
Free-standing kit for Powerhouse
Includes AC adaptor for use in station house
All necessary hardware included
RCN17ALK
Alkaline Battery Case
•
•
•
Fits TacSight® Series Thermal Imagers
Eight AA alkaline batteries required (batteries not included)
Not for rechargeable batteries
T320CASEUPGRADE
Thermal Imager Carrying Case
•
•
•
Upgrade T320 Thermal Imager case at time of purchase
Will also hold Transmit Handle, MobileLink, Tacport, charger, and two
spare batteries
T3ALK
Alkaline Battery Case
•
•
•
Fits T3 and T4 Series Thermal Imagers
Eight AA alkaline batteries required (batteries not included)
Not for rechargeable batteries
T3GLARESHIELD
Glare Shield
•
•
•
28
Fits T3 and TacSight® Series Thermal Imagers
Eliminates glare for daytime use
Accessories
T3HANDLE
Thermal Imager Handle for T3 and T4 Series Thermal Imagers
•
Does not include transmitter
T3MAXCASEUPGRADE
Thermal Imager Carrying Case (Upgrade at Time of Purchase)
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
T3POWERUP
PowerUp Charger, Analyzer, and Conditioner for T3, T4, and TacSight® Series Thermal Imager
•
•
Charges, analyzes, and conditions batteries for optimal performance
Works in conjunction with myBullard® personal control panel software
T3POWERUPUPGRADE
PowerUp Charger, Analyzer, and Conditioner - Upgrade
•
Same as T3POWERUP but upgrades standard desktop charger to PowerUp with new
Thermal Imager purchases
T3RETRACT
Retractable Strap
•
Extendable strap designed to keep the T3, T4, or TacSight® Series Thermal
Imagers out of the way while working
T4GLARESHIELD
Glare Shield for T4 Series Thermal Imagers
•
•
E liminates glare for daytime use
T4MAXCASEUPGRADE
•
•
T4NCASEUPGRADE
•
•
www.bullard.com
29
TI: Accessories &
Replacement Parts
Thermal Imager
Accessories
TACPORT
Attachable Utility Block
•
•
•
•
For use with T3, T4, and TacSight® Series Thermal Imagers
Provides video-out signal for extended training or surveillance operations
AC/DC connections for power input (DC adaptor included)
Maintains tripod mount
TACSCOPE
Attachable Monocular Eyepiece
•
•
•
•
Clear view of thermal image and easily removed for low threat operations
Eliminates backlighting of face, by LCD screen, during high risk situations
Display on/off switch for additional stealth
Thermal Imager
Kits & Bundles
ECLBUNDLE
Eclipse® Thermal Imaging Bundle
•
Same features as Eclipse® plus: ECLPOWERHOUSE-vehicle charger (includes
two batteries)
ECLLDBUNDLE
Eclipse® LD Thermal Imaging Bundle
•
Same features as Eclipse® LD plus: ECLPOWERHOUSE-vehicle charger (includes
two batteries)
T320BUNDLE
T320 Thermal Imaging Bundle
•
30
Same features as T320 plus: POWERHOUSE-vehicle charger, T320EXT-1 year
extended warranty
Kits & Bundles
T320TTBUNDLE
T320TT Thermal Imaging Bundle
•
Same features as T320TT plus: POWERHOUSE-vehicle charger, T320TTEXT-1 year
extended warranty
T3MAXBUNDLE
T3MAX Thermal Imaging Bundle
•
TI: Accessories &
Replacement Parts
Thermal Imager
Same features as T3MAX plus: Powerhouse-vehicle charger, T3MAXEXT-1 year
extended warranty
T3MAXTTBUNDLE
T3maxtt Thermal Imaging Bundle
•
Same features as T3maxtt plus: Powerhouse-vehicle charger, T3MAXTTEXT-1 year
extended warranty
T4MAXBUNDLE
T4MAX Thermal Imaging Bundle
•
Same features as T4MAX plus: Powerhouse-vehicle charger, T4MAXEXT-1 year
extended warranty
T4NBUNDLE
T4N Thermal Imaging Bundle
•
Same features as T4N plus: Powerhouse-vehicle charger, T4NEXT-1 year
extended warranty
T4NBUNDLESS
T4N Thermal Imaging Bundle
•
•
Same features as T4N plus: Powerhouse-Vehicle Mounted Direct Charge
System, SCENECATCHER-digital video recorder, T4NEXT-1 year extended warranty
NOTE: T4N attachable accessories are not NFPA 1801-2013 compliant
Also available: T3MAXBUNDLESS, T3MAXTTBUNDLESS, T320BUNDLESS,
T320TTBUNDLESS, and T4MAXBUNDLESS
www.bullard.com
31
Thermal Imager
TI: Accessories &
Replacement Parts
Kits & Bundles
TacSightSE35KIT
TacSight® SE35 Thermal Imaging Kit
•
Same features as TacSight® SE35 plus: HANDLETRANSONLY2-two channel wireless
remote transmitter handle, ML2-MobileLink two-channel wireless remote receiver,
TACSCOPE-attachable monocular eyepiece, TACPORT-attachable utility block with
power in/power out, video out, tripod mount, RCN17ALK-alkaline battery pack for
alternate AA battery power, NIMH-spare battery
TacSightSE35KIT2
TacSight® SE35 Thermal Imaging Kit
•
Same features as TacSight® SE35 plus: TACSSTRANS2-SceneCatcher DVR and
2-channel Transmitter, ML2-MobileLink two-channel wireless remote receiver,
TACSCOPE-attachable monocular eyepiece, TACPORT-attachable utility block with
power in/power out, video out, tripod mount, RCN17ALK-alkaline battery pack for
alternate AA battery power, NIMH-spare battery, T3GLARESHIELD-glare shield
Thermal Imager
Extended Warranties
CareFree™ Thermal Imager Extended Warranty
• Extends standard warranty to 5 years and includes battery replacement coverage
• Order this part number with purchases of new thermal imagers
•
ECLCFBUNDLE
•
ECLLDCF
•
ECLLDCFAM*
•
ECLLDCFBUNDLE
•
T4MAXCF
•
T4MAXCFAM*
•
T4N
•
ECLCFAM*
T4MAX
ECLCF
Eclipse® LD
Part
Eclipse®
CareFree™ Thermal Imager Extended Warranty
T4NCF
•
T4NCFAM*
•
* Can only be ordered for aftermarket purchases; within one year of thermal imager manufacturing date.
32
Extended Warranties
ECLEXT
Thermal Imager Extended Warranty
•
•
•
Available for Eclipse® Thermal Imagers
1 year extended warranty (total of 2 years)
Must be purchased when thermal imager is ordered
ECLLDEXT
•
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
Available for Eclipse® LD Thermal Imagers
ECLLDEXT2
•
•
•
EdgeEXT
•
•
•
Available for Edge™ Thermal Imagers
EdgeEXT2
•
•
•
SE35EXT
•
•
•
Available for TacSight® SE35 Thermal Imagers
www.bullard.com
33
TI: Accessories &
Replacement Parts
Thermal Imager
Extended Warranties
T320EXT
•
•
•
Available for T320 Thermal Imagers
T320EXT2
•
•
•
T320TTEXT
•
•
•
Available for T320TT Thermal Imagers
T320TTEXT2
•
•
•
Available for T320TT Thermal Imagers
T3MAXEXT
•
•
•
Available for T3MAX Thermal Imagers
T3MAXEXT2
•
•
•
34
Extended Warranties
T3MAXTTEXT
•
•
•
Available for T3MAXTT Thermal Imagers
T3MAXTTEXT2
•
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
Available for T3MAXTT Thermal Imagers
T4MAXEXT
•
•
•
T4MAXEXT2
•
•
•
T4NEXT
•
•
•
Available for T4N Thermal Imagers
T4NEXT2
•
•
•
Available for T4N Thermal Imagers
www.bullard.com
35
TI: Accessories &
Replacement Parts
Thermal Imager
Upgrades
ECL160
Eclipse® Upgrade to 160 x 120 Resolution
•
Available for standard Eclipse® Thermal Imagers
ECL160UPGRADE
Eclipse® Upgrade to 160 x 120 Resolution (Installed Base)
•
•
For upgrades of field installed units
ECL160UPGRADEPM
Eclipse® Upgrade to 160 x 120 Resolution (Installed Base with PM)
•
•
•
Includes Preventative Maintenance Package with complete exterior refurbishment
ECL320
Eclipse® LD Upgrade to 320 x 240 Resolution
•
ECL320UPGRADE
Eclipse® LD Upgrade to 320 x 240 Resolution (Installed Base)
•
•
ECLBTD
Bar Temperature Display
•
•
36
Provides surface temperature measurement in bar style (RHI) format
Upgrades
eclCUSTGRAPH
Customized Startup Graphics
•
•
Load your own personalized startup graphic
ECLETT
•
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
Available for Eclipse® Series Thermal Imagers
Isolates heat sources in shades of blue
Exclusive Bullard Thermal Imager feature
ECLHHC
High Heat Colorization
•
•
Highlights high heat conditions in yellow, orange, and red
ECLNTD
Numeric Temperature Display
•
•
Provides surface temperature measurement in numeric format
eclSRH
•
•
Highlights high heat conditions in yellow, orange, and red
eclTEMP
Numeric Temperature Display
•
•
Provides surface temperature measurement in numeric and/or bar style
(RHI) format
www.bullard.com
37
TI: Accessories &
Replacement Parts
Thermal Imager
Upgrades
eclTEMPCOMBO
Numeric and Bar Temperature Display
•
•
Provides both numeric and bar style surface temperature measurement
Edge160
Edge™ Upgrade to 160 x 120 Resolution
•
Edge160UPGRADE
Edge™ Upgrade to 160 x 120 Resolution (Installed Base)
•
•
T320TTUPGRADE
T320 Upgrade to T320TT with Electronic Thermal Throttle®
•
•
T3MAXTTUPGRADE
T3MAX Upgrade to T3MAXTT with Electronic Thermal Throttle®
•
•
38
Replacement Parts
ACADAPTOR (12-15V)
12-15 Volt AC Adaptor
•
For use with 12-15 Volt T4MAX, T3MAX, T320, Eclipse® Series, Edge™,
and TacSight® Series Thermal Imager chargers, Eclipse® Powerhouse, and
Powerhouse Kit
ACADAPTOR20V
20 Volt AC Adaptor
•
TI: Accessories &
Replacement Parts
Thermal Imager
For use with 20 Volt T3 and T4 Series, Eclipse® Series, Edge™, and TacSight®
Series Thermal Imager chargers and charger/analyzers
CARADAPTOR (12-15V)
12-15 Volt DC Car Adaptor
•
•
For use with 12-15 Volt T3 and T4 Series, Eclipse® Series, Edge™, and
TacSight® Series Thermal Imager chargers, Eclipse Powerhouse, and
Powerhouse Kit
Not for use with 20 Volt desktop chargers (use AC Inverter)
CASEFOAM
Foam Insert
•
•
Hardcase replacement foam insert with accessory accommodation
ECLBUMPER
Front Rubber Bumper
•
For Eclipse® Series and Edge™ Thermal Imagers
www.bullard.com
39
TI: Accessories &
Replacement Parts
Thermal Imager
Replacement Parts
ECLCHARGER20V
20 Volt Desktop Charger
•
•
•
For use with Eclipse® Series and Edge™ Thermal Imagers
Charger base for NiMH batteries
Includes 20 Volt AC Adaptor (ACADAPTOR20V)
ECLDATACABLE
Data Cable
•
•
•
•
Cable for standard Eclipse® Thermal Imagers
Data cable required to connect above thermal imager
Required for accessing the Eclipse® Control Panel Software
OnLY for use with standard Eclipse® Thermal Imagers
ECLDATACABLERED
Data Cable - Red
•
•
•
Cable for Eclipse® LD and Edge™ Thermal Imagers
Data cable required to connect the above thermal imager
Required for accessing the myBullard™ personal control panel software
ECLDATAPOWER
AC Power Adaptor for Data Cable
•
•
Adaptor for Eclipse® Series and Edge™ Thermal Imagers
Required for accessing the Eclipse® Control Panel and myBullard™ personal
control panel software
ECLGLARESHIELDLENS
Glare Shield Replacement Lens
•
For ECLGLARESHIELD
ECLLCDGUARD
LCD Guard (Rear Boot)
•
40
Fits standard Eclipse® and Edge™ Thermal Imagers
Replacement Parts
ECLLDLCDGUARD
LCD Guard (Rear Boot)
•
For Eclipse® LD Thermal Imagers
ECLLDPM
Preventive Maintenance Service
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
Applied to the Eclipse® LD Thermal Imagers
Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
ECLLDWINDOW
Display Cover
•
•
Hard-coated polycarbonate display shield
ECLMETAL
Front Metal Plate
•
•
For Eclipse® Series Thermal Imagers
Includes metal plate and four screws
ECLMETAL160
Front Metal Plate
•
•
For Eclipse® Series Thermal Imagers
ECLMETAL320
Front Metal Plate
•
•
www.bullard.com
41
TI: Accessories &
Replacement Parts
Thermal Imager
Replacement Parts
ECLNIMH
10 Volt NiMH Rechargeable Battery
•
Compatible with Eclipse® Series and Edge™ Thermal Imagers
ECLPM
•
•
Applied to the standard Eclipse® Thermal Imagers
ECLWINDOW
Display Cover
•
•
For standard Eclipse® and Edge™ Thermal Imagers
Hard-coated polycarbonate display shield
EdgeFRONT
Front Replacement Cover
•
•
Replacement cover for Edge™ Thermal Imager
NOT for use with Eclipse® Series Thermal Imagers
EdgeHARDCASE
Thermal Imager Carrying Case
•
•
Compatible with Edge™ Thermal Imagers
Pelican™ Case with unconditional lifetime guarantee
EdgePM
•
•
42
Applied to the Edge™ Thermal Imagers
Replacement Parts
LCDGUARD
Replacement LCD Guard (Rear Boot)
•
For T3 and TacSight® Series Thermal Imagers, as well as MobileLink
handheld receivers
MCCANTENNA
Antenna for Mobile Command Center
•
TI: Accessories &
Replacement Parts
Thermal Imager
Replacement antenna for Mobile Command Center
MLANTENNA
MobileLink Antenna
•
Replacement antenna for MobileLink handheld receiver
MLKNOB
Channel Selector Knob
•
Replacement knob for MobleLink handheld receiver
MLSTRAP
Hand Strap
•
Replacement hand strap for MobileLink handheld receiver
NFPANIMH
NFPA NiMH Rechargeable Battery
•
For T4N Thermal Imagers
www.bullard.com
43
TI: Accessories &
Replacement Parts
Thermal Imager
Replacement Parts
NIMH
•
For TacSight® Series Thermal Imagers and MobileLink handheld receivers
SSUSB
SceneCatcher Upgrade with Mini-USB
•
Upgrade old style SceneCatcher data port to mini-USB
T3CHARGER20V
Charger Base
•
•
•
For use with T3 and T4 Series Thermal Imagers
Charger Base for NiMH batteries
Includes 20 Volt AC Adaptor (ACADAPTOR20V)
T3COMBOSTRAP
Combo Wrist and Gear Strap
•
Use with T3 or T4 Series Thermal Imagers
T3GLARESHIELDCLIPS
Glare Shield Replacement Clips
•
Replacement clips for T3Glareshield and T4Glareshield
T3GLARESHIELDLENS
Glare Shield Replacement Lens
•
44
Replacement lens for T3Glareshield and T4Glareshield
Replacement Parts
T3NIMH
•
For T3 and T4 Series Thermal Imagers and MobileLink handheld receiver
T3PERSONALSTRAP
Personalized Strap - Included with Camera
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
When ordering T3 and T4 Series Thermal Imagers
Personalize up to 8 spaces and characters
t3PM
Preventative Maintenance Service
•
•
Applied to the T3 Series Thermal Imagers
T3PMKIT
Service Kit
•
•
For T3 Series Thermal Imagers
Includes: Left and right side straps, display cover window, and battery
T3SP
Replacement Personalized Strap
•
•
For T3 and T4 Series Thermal Imagers as an after purchase replacement
Personalize up to 8 spaces and characters
t3strapkit
Replacement Strap Kit
•
•
For T3 or T4 Series Thermal Imagers
Includes right and left side straps
www.bullard.com
45
TI: Accessories &
Replacement Parts
Thermal Imager
Replacement Parts
T3TRANSKNOB
Channel Selector Knob
•
Replacement for transmitter handle
T3WINDOW
Replacement Window
•
•
For T3 Series Thermal Imagers and MobileLink handheld receiver
Hard coated polycarbonate display shield
T4LCDGUARD
Replacement LCD Guard (Rear Boot)
•
T4PM
•
•
Applied to the T4 Series Thermal Imagers
T4PMKIT
Service Kit
•
•
T4WINDOW
Replacement Window
•
•
46
For T4 Series Thermal Imagers and MobileLink handheld receiver
Replacement Parts
TACPM
•
•
Applied to the TacSight® Series Thermal Imagers
tacpmkit
Service Kit
•
•
TI: Accessories &
Replacement Parts
Thermal Imager
For TacSight® Series Thermal Imagers
TACSTRAPKIT
•
•
For TacSight® Series Thermal Imagers
tacwindow
Replacement Window
•
•
For TacSight® Series Thermal Imagers and MobileLink handheld receiver
WINDOWSCREWS
Replacement Screws for Display Window
•
For T3, T4, and TacSight® Series Thermal Imager display windows
www.bullard.com
47
TI: Accessories &
Replacement Parts
Retired Thermal Imager
Replacement Parts
BATTERYKNOBS
Knobs for Battery
•
Replacement Knobs and hardware for TIx, MX, and TI Commander Thermal Imagers
BATTERYNIMH
Rechargeable Battery
•
•
For use with MX and TIx Thermal Imagers
10 Volt NiMH rechargeable battery
BATTERYNIMHULTRA
Ultra-performance NiMH battery
•
•
For use with MX, TI, TI Commander, and TIx Thermal Imagers to increase
operating time
10 Volt high capacity NiMH rechargeable battery
BUMPERKIT
Replacement Bumpers
•
•
Replacement bumpers for MX, TI Commander, and TIx Thermal Imagers
Includes three field replaceable bumpers and hardware
CLAMP
Clamp System
•
•
•
Compatible with MX, TI Commander, and TIx Thermal Imagers
Mount imager to almost any surface
Use with tripod or as stand alone system
CMDDATACABLE
Data Transfer Cable
•
•
48
Cable for downloading saved digital thermal images
Connects from TI Commander Thermal Imagers to PC serial port
Replacement Parts
CMDDCCABLE
Direct Charge Cable
•
Power cord for direct charging of TI Commander Thermal Imagers
CMDKIT
Service Kit
•
•
TI: Accessories &
Replacement Parts
For TI Commander Thermal Imagers
Includes: Replacement bumpers, side and top straps, replacement display cover
window, battery, and direct charge power cord
CMDPM
•
•
Applied to the TI Commander Thermal Imagers
CMDRCACABLE
Video Out Cable
•
•
•
•
For use with TI Commander Thermal Imagers
RCA Cable for thermal imager video capture
Connect from TI Commander to external monitor or recorder
Not suitable for high heat environments
CMDTRUCKMNT
TI Commander Truck Mount
•
•
•
Built-in charger
Mounting gasket
Attachment hardware
CMDWINDOW
Replacement Window
•
•
For TI Commander Thermal Imagers
www.bullard.com
49
TI: Accessories &
Replacement Parts
Replacement Parts
DUALCHARGERBASE
Dual Charger Base
•
•
•
For use with MX, TI Commander, and TIx Thermal Imagers
Direct charge battery charger base for NiMH rechargeable batteries
Does not include power adaptors and cords
MTSSTRANS2UP
Transmitter Handle Upgrade
•
Upgrade an existing transmitter handle to an SSTRANS2
MXPM
•
•
Applied to MX Thermal Imagers
OMNI
Remote Receiver Antenna
•
•
•
Compatible with receiver box system
Omni directional antenna
Permanent and magnetic mounts included
OMNIONLY
Remote Receiver Antenna
•
•
•
Compatible with receiver box system
Omni directional antenna
Antenna mounts not included
SHSTRAP
Shoulder Strap
•
50
Replacement shoulder strap for TI Commander Thermal Imagers
Replacement Parts
SINGLECHARGERBASE
TI Charger Base
•
•
•
•
For use with charger base for MX, TI, TIx, and TI Commander Thermal Imagers
No direct charge capability
For use with NiMH or NiCad batteries
Does not include power adaptors and cords
STRAPKIT
•
•
•
TI: Accessories &
Replacement Parts
For MX, TI Commander, and TIx Thermal Imagers
Includes: wrist, side, and top straps
Made of Kevlar® and leather material
STRAPSCREWS
Side Strap Replacement Screws
•
•
Four replacement screws for side straps
TIDCPOWERCORD
Direct Charge Power Cord
•
•
•
For MX and TIx Thermal Imagers
Power cord for direct charger
For upgraded direct charge port Thermal Imagers, order Part Number CMDDCCABLE
TIGLARESHIELD
Glare-reducing Leather Shroud
•
•
Attaches to MX, TI Commander, and TIx Thermal Imager
Reduces glare in bright sun conditions
TIMXPMKIT
Service Kit
•
•
Includes: Replacement bumpers, side and top straps, replacement display cover
window, battery and direct charge power cord
www.bullard.com
51
TI: Accessories &
Replacement Parts
Replacement Parts
TIPM
•
•
Applied to the TI and TIx Thermal Imagers
TISP
•
•
Use with MX, TI Commander, and TIx Thermal Imagers
tiwindow
Replacement Window
•
•
TRIPOD
Thermal Imager Tripod
•
•
•
Heavy-duty 4 ft tripod for thermal imager
Mounting bracket included
TRUCKMNT
Truck Mount Direct Charge System
•
•
52
For TIx Thermal Imagers
Includes: truck mount, built-in charger, mounting gasket, and attachment hardware
Structural Fire
Helmets
Structural Fire
Helmets
In This
Section
•
•
•
•
•
•
www.bullard.com
UST Series
FX Series
PX Series
LT Series
USRX Series (refer to pp 102-107)
Accessories & Replacement Parts
Fire Helmet
UST Series
UST Colors:
UST Series
UST Helmets are NFPA 1971-2013 Certified
UST structural firefighter helmets provide classic
traditional style in an affordable, easy-to-maintain
design. With an outer shell made of Thermoglas®, and
the M-PACT Plus molded inner liner system, the UST
provides toughness and durability. UST Models are
equipped with the U-Fit System, offering 12 custom
comfort settings.
Black*
White*
Red*
Orange
Yellow*
Lime-yellow
Blue
Green
Light Pink
Camouflage
Pink Camo
USTM ONLY
*Color also available for USTM
Available in matte (USTM) or gloss (UST) finish.
UST6
USTM6
(shown non-standard)
Gloss finish
MATTE finish
highlights:
•
•
•
•
•
•
•
Thermoglas® outer shell
M-PACT Plus molded inner liner system (R921)
Sure-Lock® ratchet headband (R637)
6-point nylon crown straps with crown pad (R112)
Nomex® chinstrap with Quick-Release buckle and
Postman’s Slide Fastener (R148)
Black rip-stop Nomex® ear and neck protector (R721)
4” hard-coated optically correct faceshield: standard
•
•
•
•
face protection (R334)
Leather ratchet cover (R160)
Removable fire resistant cotton brow pad (R635)
Stars and Stripes brass eagle for 6” leather front
(leather front sold separately)
Available with TrakLite®
Options for UST - No Additional Charge
•
•
•
•
54
R325 6” Faceshield (NOT NFPA-compliant with 6" eagle or maple leaf)
R539 Red-orange reflective striping
R721YLW Yellow Nomex® ear & neck protector
OR600ML Maple leaf leather front holder (6” only)
Fire Helmet
Configurations
new! ESS FirePro™ 1971
Goggles: FP2 and FP3
Gloss TRAKLITE®
UST Series
UST6TL - TrakLite® on standard gloss shell
UST6BRKTL* - w/Bourke, no faceshield
UST6R325TL* - w/R325 6" faceshield
USTG26TL - w/IZ2, no faceshield
USTG26BRKTL - w/IZ2, Bourke
USTG36TL - w/IZ3, no faceshield
USTG36BRKTL - w/IZ3, Bourke
USTGFP26TL - w/FP2, no faceshield
USTGFP26BRKTL - w/FP2, Bourke
USTGFP36TL - w/FP3, no faceshield
USTGFP36BRKTL - w/FP3, Bourke
Matte TRAKLITE®
USTM6TL - TrakLite® on standard matte shell
USTM6BRKTL* - w/Bourke, no faceshield
USTM6R325TL* - w/R325 6" faceshield
USTMG26TL - w/IZ2, no faceshield
USTMG26BRKTL - w/IZ2, Bourke, no faceshield
USTMG36TL - w/IZ3, no faceshield
USTMG36BRKTL - w/IZ3, Bourke, no faceshield
USTMGFP26TL - w/FP2, no faceshield
USTMGFP26BRKTL - w/FP2, Bourke, no faceshield
USTMGFP36TL - w/FP3, no faceshield
USTGFP36BRKTL - w/FP3, Bourke, no faceshield
Gloss GoggleS
USTG26 - IZ2 on standard gloss shell
USTG26BRK - w/Bourke, no faceshield
USTG36 - IZ3 on standard gloss shell
USTG36BRK - w/Bourke, no faceshield
USTGFP26 - FP2 on standard gloss shell
USTGFP26BRK - w/Bourke, no faceshield
USTGFP36 - FP3 on standard gloss shell
USTGFP36BRK - w/Bourke, no faceshield
MATTE GoggleS
USTMG26 - IZ2 on standard matte shell
USTMG26BRK - w/Bourke, no faceshield
USTMG36 - IZ3 on standard matte shell
USTMG36BRK - w/Bourke, no faceshield
USTMGFP26 - FP2 on standard matte shell
USTMGFP26BRK - w/Bourke, no faceshield
USTMGFP36 - FP3 on standard matte shell
USTMGFP36BRK - w/Bourke, no faceshield
* Not NFPA-compliant
www.bullard.com
55
Fire Helmet
Configurations
We still offer 5” leather
front options. Please
contact Customer Service
for more information.
Gloss Bourke
UST Series
UST6BRK* - Bourke on standard gloss shell
USTG26BRK - w/IZ2, no faceshield
USTG36BRK - w/IZ3, no faceshield
USTGFP26BRK - w/FP2, no faceshield
USTGFP36BRK - w/FP3, no faceshield
matte Bourke
USTM6BRK* - Bourke on standard matte shell
USTMG26BRK - w/Bourke, IZ2, no faceshield
USTMG36BRK - w/Bourke IZ3, no faceshield
USTMGFP26BRK - w/Bourke, FP2, no faceshield
USTMGFP36BRK - w/Bourke, FP3, no faceshield
Gloss MAPLE LEAF LEATHER FRONT HOLDER
UST6ML - Maple leaf leather front holder instead of brass eagle on standard gloss shell
UST6BRKML* - w/Bourke, no faceshield
UST6R325ML* - w/R325 6" faceshield
USTG26ML - w/IZ2, no faceshield
USTG26BRKML - w/IZ2, Bourke
USTGFP26ML - w/FP2, no faceshield
USTGFP26BRKML - w/FP2, Bourke
MATTE MAPLE LEAF LEATHER FRONT HOLDER
UST6ML - Maple leaf leather front holder instead of brass eagle on standard matte shell
UST6BRKML* - w/Bourke, no faceshield
UST6R325ML* - w/R325 6" faceshield
* Not NFPA-compliant
56
Fire Helmet
Customizable Parts



UST Series





1. Leather Front Holder: Choose between stars and
stripes eagle or brass maple leaf.
2. Gloss Shell: 9 colors
Matte Shell: 6 colors
3. Scotchlite® Reflective Striping: The highest quality
reflective material available. Retains reflectivity to
500°F (260°C). Available standard in lime-yellow
and orange or triple trim for accountability.
4. Chinstrap with Postman's Slide: Easy to adjust
and secure.
5. Ear & Neck Protector: Choose between Nomex® or
PBI®/Kevlar® material, with or without throat strap.
6. Face Protection: 4” or 6" optically correct
faceshield eliminates distortion and reduces eye
stress and fatigue. Four types of industry-leading
ESS goggles also available.
7. TrakLite®: Featuring multiple forward-facing, long
lasting, and bright LED lights. TrakLite® is integrated
into the helmet design for excellent weight balance
and illumination. Added safety features include the
rear buddy indicator light, long battery life (AAA
batteries), and easy on/off operation.
8. Leather Front: Customize your leather front using
our state-of-the-art online configurator at www.BuildYourBullard.com/.
Available accessories &
replacement parts:
(p 58-64)
www.bullard.com
57
UST Series
Accessories &
Replacement Parts
UST: Accessories &
Replacement Parts
EL3
Replacement Clear Goggle Lens
•
•
•
Compatible with IZ2 and IZ3 goggles
NFPA-compliant
Available as 10-pack
ES4
Innerzone 2-piece Strap
•
•
Compatible with IZ2 goggles
ES5
•
•
Essarslv-n
Goggle Sleeve
•
•
For use with ESS goggles
Made of flame-retardant Nomex®
EZEX
Snap Helmet Mount Brackets
•
•
Compatible with IZ2 and FP2 goggles
Available as 10-pack (20 pieces total)
FP2
ESS FirePro™ 1971 Goggles
•
•
•
•
58
NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
2-piece snap-on/snap-off strap
Anti-scratch/anti-fog lens
Speed clip Quick-Adjust System
UST Series
Accessories &
Replacement Parts
1-piece wraparound strap
•
•
•
•
IZ2
Innerzone 2B
•
•
•
•
UST: Accessories &
Replacement Parts
FP3
IZ3
Innerzone 3B
•
•
•
•
OR503
5” Brass Eagle
•
•
Leather front holder for 5" leather fronts
Includes mounting hardware
OR600
6” Brass Stars & Stripes Eagle
•
•
OR600ML
6” Brass Maple Leaf
•
•
•
Bullard exclusive
www.bullard.com
59
UST Series
Accessories &
Replacement Parts
UST: Accessories &
Replacement Parts
R112
Crown Strap Assembly
•
•
Made of Nomex®
Includes crown pad (R636)
R148
Chinstrap
•
•
•
Made of Nomex®
Quick-Release buckle and Postman’s Slide Fastener
Includes spacers and screws for mounting
R152
Faceshield Mounting Hardware Kit
•
•
•
•
Compatible with R330 and R325 faceshield
Aluminum mounting brackets
Glass reinforced nylon knobs
Stainless steel studs and brass T-nuts
R156
•
•
•
•
Compatible with R334 faceshield
R157
Replacement Screws for Leather Front Holder
•
Set of 10 screws and 10 acorn nuts
R158
Replacement Screws for Leather Fronts
•
60
Set of 20 screws; each leather front uses two
UST Series
Accessories &
Replacement Parts
Leather Ratchet Cover
•
Compatible with all Bullard ratchet suspensions
R309
Bourke Eyeshield
UST: Accessories &
Replacement Parts
R160
R325
6" Faceshield
•
•
Optically correct polycarbonate faceshield
Mounting hardware (R152) not included
R330
4" Faceshield
•
•
Optically correct polyarylate faceshield
R334
4" Faceshield
•
•
Optically correct polyarylate high-heat faceshield
R535
Retro-reflective Stripes
•
•
•
•
Fluorescent lime-yellow Scotchlite®
Adhesive-backed
Size: 2.1875”x 2.625”
Set of 8
www.bullard.com
61
UST Series
Accessories &
Replacement Parts
UST: Accessories &
Replacement Parts
R539
•
•
•
•
Fluorescent red-orange Scotchlite®
Adhesive-backed
Size: 2.1875”x 2.625”
Set of 8
R545
•
•
•
•
Fluorescent lime-yellow triple trim Scotchlite®
Adhesive-backed
Size: 3”x 2.625”
Set of 8
R549
•
•
•
•
Fluorescent red-orange triple trim Scotchlite®
Adhesive-backed
Size: 3”x 2.625”
Set of 8
R628
U-fit Ratchet Height Adjuster
R635
Cotton Brow Pad
•
•
Made of Jersey knit cotton
Fire-retardant
R635L
Leather Brow Pad
•
•
62
Made of leather
Fire-retardant
UST Series
Accessories &
Replacement Parts
Sure-Lock® Ratchet Headband with Cotton Brow Pad
•
Includes: R635-jersey knit brow pad, R628-height adjuster, R160-leather
ratchet cover
R637L
Sure-Lock® Ratchet Headband with Leather Brow Pad
•
Includes: R635L-leather brow pad, R628-height adjuster, R160-leather
ratchet cover
UST: Accessories &
Replacement Parts
R637
R721
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Flame-retardant cotton lining
Black color
R721YLW
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R726
Ear/Neck Protector with Throat Strap
•
•
•
•
Made of Nomex®
Rip-stop
Black color
R726YLW
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
www.bullard.com
63
UST Series
Accessories &
Replacement Parts
UST: Accessories &
Replacement Parts
R741
Ear/Neck Protector
•
•
•
•
Made of PBI®/Kevlar®
Rip-stop
Tan color
R746
•
•
•
•
Rip-stop
Tan color
R921
M-PACT Plus Molded Inner Liner System with Cotton Brow Pad
•
•
Inner shell with Urethane impact liner
Includes: R637-Sure-Lock® ratchet headband, R635-jersey knit brow pad,
R636-cotton crown pad, R112-6-point nylon crown strap assembly, Velcro® strips
R921L
M-PACT Plus Molded Inner Liner System with Leather Brow Pad
•
•
Includes: R637-Sure-Lock® ratchet headband, R635L-leather brow pad, R636-cotton crown pad, R112-6-point nylon crown strap assembly, Velcro® strips
USTBLOCKKIT
Chinstrap Mounting Block Kit
•
64
12 mounting blocks and 24 screws service up to 6 complete helmets
Fire Helmet
Spotlight
Bullard offers an array of fire helmet fits and styles
that are NFPA certified.
What is NFPA?
Established in 1896, the National Fire Protection
Association (NFPA) is a leading advocate of fire prevention
and is an authoritative source on public safety.
A major focus of NFPA is the development, publication,
and dissemination of codes and standards for the fire
service. NFPA codes and standards are developed by about
250 committees, each of which represents a balance of
affected interests.
In fact, the 300 NFPA codes and standards influence
every building, process, service, design, and installation
in the United States, as well as many of those used in
other countries.
How do I know if a helmet meets NFPA standards?
Check the label. Look for the compliance statement and
the certification organization’s mark. The compliance
statement indicates that the specific product meets the
requirements of the relevant NFPA standards. Language
such as “Designed to meet …” or “Meets the relevant
portions of …” are not true compliance statements. Only
products that meet all requirements of an NFPA standard,
including independent third-party certification, can carry
a compliance statement. You can check for third-party
certification by finding the certification organization’s
mark on the product label. Only product labels with a mark
such as those certified by Underwriters Laboratories or the
Safety Equipment Institute (SEI) have met all the rigors of
a third-party certification process required by each NFPA
product standard.
Are Bullard fire helmets certified to NFPA standards?
Yes. Bullard fire helmets are certified to various NFPA
standards. Our Company’s strict compliance with these
standards can ensure you that Bullard helmets provide
a certain standard level of protection. Our helmets have
been certified to NFPA standards by the Safety Equipment
Institute (SEI). That information, as well as the NFPA
compliance statement, is located on the label of each
helmet. The listing below shows the NFPA standard for
which each Bullard helmet model is certified.
FH Spotlight
NFPA Standards
NFPA 1971-2013 UST Series
PX Series
FX Series
LT Series
AX Series
USRX Series
NFPA 1977-2011 Wildfire® Series
NFPA 1951-2013 USRX Series
www.bullard.com
65
Fire Helmet
FX Series
FX Colors:
FX Series
FX Helmets are NFPA 1971-2013 Certified
Bullard comfort, quality, and durability in a
lightweight contemporary design give firefighters
stability and versatility in the FX. This helmet
complies with NFPA, as well as advanced military fire
standards. It has a lower profile and a less restrictive,
compact design than traditional styles. The FX is a
composite helmet, resistant to chemical attack, and
stable under high heat exposure. Featuring color
pigment that is molded directly throughout the outer
shell, nicks and chips are less visible.
Black
White
Red
Orange
Yellow
Lime-yellow
Blue
Green
Light Pink
FX
highlights:
•
•
•
•
•
•
•
•
•
•
M-PACT Plus molded inner liner system with
Urethane impact liner (R921)
6-point Nylon crown straps with crown pad (R112)
Black rip-stop Nomex® ear/neck protector (R721)
4” hard-coated optically-correct faceshield (R330)
Scotchlite® reflective striping (R533)
Options for FX - No Additional Charge
•
•
•
66
R325 6” Faceshield
R534 Red-orange Reflective Striping
R721YLW Yellow Nomex® Ear/Neck Protector
Fire Helmet
Configurations
Add some personality
to your FX or PX helmet
with a customized 4"
leather front!
•
•
•
•
•
•
•
•
•
•
•
M-PACT Plus molded inner liner system with Urethane impact liner (R921)
Nomex® chinstrap with Quick-Release buckle and Postman’s Slide Fastener (R144)
4” hard-coated optically correct faceshield (R330)
TrakLite® (TL)
FXGTL - FX with Goggle & TrakLite®
•
•
•
•
•
•
•
•
•
•
•
FX Series
FXTL - FX with TrakLite®
Choice of ESS Goggle (FP2, FP3, IZ2, IZ3)
TrakLite® (TL)
FXG - FX with Goggle
•
•
•
•
•
•
•
•
•
•
FXA1 - FX/US NAVY
•
•
•
•
•
•
•
•
•
Black high-heat thermoplastic inner shell (R925)
Nomex® chinstrap with Quick-Release buckle (R146)
Black rip-stop PBI®/Kevlar®, moisture barrier Nomex® ear/neck protector with
throat strap (R727)
www.bullard.com
67
Fire Helmet
PX Series
PX Colors:
PX Series
PX Helmets are NFPA 1971-2013 Certified
Black
White
Red
Yellow
Lime-yellow
Blue
Orange
The PX Series helmets have an advanced, specially
formulated thermoplastic outer shell, which makes
PX the ideal fire helmet for heavy-duty. No other
fire helmet has the proven on-the-job performance
or long-lasting durability of the PX. The comfort,
quality, and durability in the PX contemporary design
give firefighters stability and versatility. This helmet
complies with NFPA. It has a lower profile and a less
restrictive, compact design than traditional styles.
PX
•
•
•
•
•
•
•
•
•
•
Ultem® thermoplastic outer shell
M-PACT Plus molded inner liner system with
Urethane impact liner (R921)
Options for PX - No Additional Charge
•
•
•
68
Fire Helmet
Configurations
Large and durable D-ring
allows you to hang your
helmet virtually anywhere
for quick access!
•
•
•
•
•
•
•
•
•
•
•
TrakLite® (TL)
PXGTL - PX with Goggle & TrakLite®
•
•
•
•
•
•
•
•
•
•
PX Series
PXTL - PX with TrakLite®
TrakLite® (TL)
PXG - PX with Goggle
•
•
•
•
•
•
•
•
•
www.bullard.com
69
Fire Helmet
Customizable Parts


FX/PX Series








1. Crown Straps with Crown Pad: 6-point suspension
system with crown pad provides extra level of comfort.
2. M-PACT Plus Molded Inner Liner System: Protects
against heat rise and provides an extra layer of
protection.
3. Sure-Lock® Ratchet Headband with Brow Pad:
Sure-Lock® is made exclusively by Bullard. Optional
leather brow pad available.
500°F (260°C). No burning, cracking or peeling.
Available standard in lime-yellow and orange or
triple trim for accountability.
5. Chinstrap with Postman’s Slide: Easy to adjust
and secure.
7. Face Protection: 4” optically correct faceshield
eliminates distortion and reduces eye stress and
70
fatigue. Four types of industry-leading ESS goggles
also available.
9. FX Outer Shell: Color pigment molded throughout
shell, and offers the ultimate in chemical and
extreme heat resistance.
10.PX shell available in 7 colors.
FX Shell available in 9 colors.
Replacement parts:
(p 71-76)
FX/PX Series
Accessories &
Replacement Parts
•
•
ES5
•
•
FX/PX: Accessories &
Replacement Parts
ES4
Essarslv-n
Goggle Sleeve
•
•
Made of flame retardant Nomex®
EZEX
Snap Helmet Mount Brackets
•
•
Compatible with IZ2 and FP2 goggles
Available as 10-pack (20 pieces total)
FP2
•
•
•
•
FP3
•
•
•
•
www.bullard.com
71
FX/PX Series
Accessories &
Replacement Parts
Replacement Parts
IZ2
Innerzone 2B
•
•
•
•
IZ3
Innerzone 3B
•
•
•
•
R112
Crown Strap Assembly
•
•
Made of Nomex®
Includes crown pad (R636)
R144
Chinstrap
•
•
•
Made of Nomex®
R146
Chinstrap
•
•
•
Made of Nomex®
Quick-Release
R151
•
•
•
•
72
FX/PX Series
Accessories &
Replacement Parts
Replacement Screws for Leather Fronts
•
Set of 20 screws; each leather front uses two
R160
•
Replacement Parts
R158
R325
6" Faceshield
•
•
R330
4" Faceshield
•
•
R400
4-inch Leather Front Mount
•
For use with PX, FX, LT, and USRX
R533
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
www.bullard.com
73
FX/PX Series
Accessories &
Replacement Parts
Replacement Parts
R534
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
R628
U-Fit Ratchet Height Adjuster
R635
Cotton Brow Pad
•
•
Fire-retardant
R635L
Leather Brow Pad
•
•
Made of leather
Fire-retardant
R637
•
ratchet cover
R637L
•
ratchet cover
R721
Ear/Neck Protector
•
•
•
•
74
Made of Nomex®
Rip-stop
Black color
FX/PX Series
Accessories &
Replacement Parts
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R726
•
•
•
•
Made of Nomex®
Rip-stop
Black color
Replacement Parts
R721YLW
R726YLW
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R727
FXA1 Ear/Neck Protector with Throat Strap
•
•
•
•
Made of Nomex®
Rip-stop is PBI®/Kevlar®
Light tan color
R741
Ear/Neck Protector
•
•
•
•
Rip-stop
Tan color
R746
•
•
•
•
Rip-stop
Tan color
www.bullard.com
75
FX/PX Series
Accessories &
Replacement Parts
Replacement Parts
R921
76
M-PACT Plus Molded Inner Liner System with Cotton Brow Pad
•
•
R636-cotton crown pad, R112-6-point nylon crown strap assembly, Velcro® strips
R921L
M-PACT Plus Molded Inner Liner System with Leather Brow Pad
•
•
Includes: R637-Sure-Lock® ratchet headband, R635L-leather brow pad, R636-cotton crown pad, R112-6-point nylon crown strap assembly, Velcro® strips
Fire Helmet
Spotlight
Bullard offers fire helmets in a variety of materials,
in order to suit the specific needs of each
firefighting situation.
Composite Helmets
Composite helmet shells are a mixture of thermoset resins
and glass fiber. The thermoset resin is the “glue” which
is needed to hold glass fibers together in a composite
helmet shell. Thermoset resins are a family of plastics that
do not melt but chemically degrade at high temperatures,
and thermoset resins are created by mixing two base
materials just like epoxy glues (Epoxy glues are thermoset
resins). One of the ingredients is a catalyst that, when
combined with the other agents and heat during molding,
will solidify the mixture, locking itself and the glass fibers
into a rigid state. In compression molding applications,
very little catalyst is used so that the liquid resin remains
stable at room temperature; the heat and pressure of
the molding operation initiates the chemical reaction to
solidify the resin.
Thermoset resins by themselves have relatively little
strength; the strength of a thermoset composite material
comes primarily from the fibers of glass or other materials
that are bonded together by the resin.
The challenge in designing an effective composite
material is getting the right mix of a good thermoset
resin and high content of glass. The glass fiber is heavier
than the resin, so getting the right mix also creates the
best potential for a lighter helmet shell. Most fire helmets
today have a glass content of approximately 50 percent.
High Performance Thermoplastics
FH Spotlight
What Goes Into a
Bullard Fire Helmet?
Until relatively recently, it was possible to obtain either
great heat resistance or great impact resistance, but not
both in the same material. Thanks to new thermoplastic
advancements, thermoplastics can now exhibit a high
quality surface finish, impact resistance and heat
resistance. While today’s advanced thermoplastics can
perform at temperatures exceeding 500˚ F (260˚ C),
thermoplastics can be sensitive to some chemical solvents.
www.bullard.com
77
Fire Helmet
LT Series
LT Colors:
LT Series
LTX Helmets are NFPA 1971-2013 Certified
Black
White
Red
Yellow
Lime-yellow
Blue
Orange
Beyond the compact, low-profile design, the
LT Series features the innovative Quick-Attach
Blade System for rapid installation and removal
of faceshields and goggles. The patented Bullard
M-PACT liner with SmartRidge design provides thermal
and impact protection, while offering more headroom
for a comfortable fit. The LT also offers the lightest
configuration in an NFPA 1971-compliant fire helmet
on the market, providing a reduction in stress and
fatigue as a result of eliminating size and weight,
without giving up performance.
LTX
•
•
•
•
•
•
•
•
•
•
Ultem® Thermoplastic outer shell
M-PACT inner liner system (R929)
Sure-Lock® ratchet suspension (R624)
Quick-Attach faceshield (R330)
Quick-Release buckle chinstrap (R142)
Options for LT - No Additional Charge
•
•
•
78
Fire Helmet
Configurations
The LT is the lightest
NFPA 1971-compliant fire
helmet on the market.
•
•
•
•
•
•
•
•
•
•
•
Quick-Attach faceshield (R330)
TrakLite® (TL)
LTXGTL - LTX with Goggle & TrakLite®
•
•
•
•
•
•
•
•
•
•
•
LT Series
LTXTL - LTX with TrakLite®
Choice of ESS Goggle (FP4, IZ4)
TrakLite® (TL)
LTXG - LTX with Goggle
•
•
•
•
•
•
•
•
•
•
Choice of ESS Goggle (FP4, IZ4)
www.bullard.com
79
Fire Helmet
Customizable Parts
LT Series










1. Crown Strap Assembly: 4-point suspension system for
extra protection against impact.
2. M-PACT Inner Liner System: Superior protection with
SmartRidge design, while remaining lightweight.
5. Nomex® Chinstrap: Easy to adjust and secure.
7. Face Protection: 4” or 6” optically correct faceshield
eliminates distortion and reduces eye stress and
fatigue. Two types of industry-leading ESS goggles
also available.
80
9. Ultem® Thermoplastic Outer Shell: Durable,
heat-resistant shell is color pigment molded
throughout. Edge beading will not melt, drip or
ignite when tested through NFPA.
10.Shell available in 7 colors.
Replacement parts:
(p 81-84)
LT Series
Accessories &
Replacement Parts
Goggle Sleeve
•
•
FP4
NFPA 1971-2013 Certified
2-piece strap, stainless steel machine screws and nuts
Speed clip Quick-Adjust System, glass reinforced nylon Quick-Attach blades
•
•
•
•
LT: Accessories &
Replacement Parts
Essarslv-n
IZ4
Goggle with Quick-Attach Blades
•
•
•
•
R141
Chinstrap
•
•
•
Made of Nomex®
R142
Chinstrap
•
•
•
Made of Nomex®
Quick-Release
R154
•
•
•
•
Aluminum washers
Glass reinforced nylon knobs and Quick-Attach blades
www.bullard.com
81
LT Series
Accessories &
Replacement Parts
LT: Accessories &
Replacement Parts
R155
Quick-Attach Goggle Hardware Kit
•
•
•
Compatible with IZ4 and FP4
Glass reinforced nylon Quick-Attach blades
Stainless steel machine screws and nuts
R160
•
R325
6" Faceshield
•
•
R330
4" Faceshield
•
•
R400
4-Inch Leather Front Mount
•
R533
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
R534
•
•
•
•
82
Adhesive-backed
Size: 1”x 4”
Set of 5
LT Series
Accessories &
Replacement Parts
•
ratchet cover
R624L
•
ratchet cover
R628
LT: Accessories &
Replacement Parts
R624
U-fit Ratchet Height Adjuster
R634
Cotton Brow Pad
•
•
Fire-retardant
R634L
Leather Brow Pad
•
•
Made of leather
Fire-retardant
R721
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Black color
R721YLW
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
www.bullard.com
83
LT Series
Accessories &
Replacement Parts
LT: Accessories &
Replacement Parts
R726
•
•
•
•
Made of Nomex®
Rip-stop
Black color
R726YLW
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R741
Ear/Neck Protector
•
•
•
•
Rip-stop
Tan color
R746
•
•
•
•
Rip-stop
Tan color
R929
M-PACT Inner Liner System with Cotton Brow Pad
•
nylon crown strap assembly, Velcro® strips, black suspension ring
R929L
M-PACT Inner Liner System with Leather Brow Pad
•
84
Includes: R624-Sure-Lock® ratchet headband, R634L-leather brow pad, nylon
crown strap assembly, Velcro® strips, black suspension ring
Air Rescue/Fire
Fighting Helmets
Air Rescue/Fire
Fighting Helmets
In This
Section
• AX Series
• AX Series Replacement Parts
www.bullard.com
Fire Helmet
AX Series
AX/FX/UST Colors:
AX Helmets are NFPA 1971-2013 Certified
AX Series
AX Series helmets are engineered specifically for the
adverse environmental conditions during proximity
firefighting incidents that release high levels of
radiant, convective, and conductive heat.
Black
White
Red
Orange
Yellow
Lime-yellow
Blue
Green
Light Pink
AX/USRX Colors:
The standard AX model is based on the FX
structural fire helmet platform. Configurations with
UST and USRX helmet platforms are also available.
When combined with an aluminized helmet shell
cover, special 3-layer aluminized shroud, and a
6” gold-coated faceshield, it meets the proximity
firefighting protective helmet requirements of
NFPA 1971, 2013 Edition.
Black
White
Red
Yellow
Lime-yellow
Blue
Orange
AX
highlights:
•
•
•
•
•
•
•
•
86
Use with FX fire helmet
Sure-Lock® ratchet headband and 6-point nylon
crown strap (R625)
6” gold-coated optically-correct faceshield (R340)
Aluminized PBI®/Kevlar® helmet cover (R260)
Aluminized PBI®/Kevlar® shroud (R757)
Fire Helmet
Configurations
Use your FX, USRX, and
UST without the shroud
for traditional firefighting
environments.
AXMIL - Use with FX
Sure-Lock® ratchet headband and 6-point nylon crown strap (R625)
Accommodates chem-warfare mask
AXMILB - Use with FX
•
•
•
•
•
•
•
•
•
Nomex® chinstrap with quick-release buckle and postman’s slide fastener (R144)
Military aluminized PBI®/Kevlar® shroud (R758)
Bottle cover (R761)
AX Series
•
•
•
•
•
•
•
•
AXUST - Use with UST
•
•
•
•
•
•
•
•
5” brass eagle
AXUSTMIL - Use with UST
•
•
•
•
•
•
•
•
•
5” brass eagle
www.bullard.com
87
Fire Helmet
Configurations
AX Series can withstand
high levels of heat
associated with
proximity firefighting.
AXUSTMILB - Use with UST
AX Series
•
•
•
•
•
•
•
•
•
•
Bottle cover (R761)
5” brass eagle
AXUSRX - Use with USRX
•
•
•
•
•
•
•
Thermoplastic outer shell
M-PACT shell with inner liner system (R929)
Nomex® chinstrap with quick-release buckle and postman’s slide fastener (R141)
*Note: Choose AXUSRX for a lighter-weight NFPA-compliant alternative
88
Fire Helmet
Customizable Parts




AX Series



1. Crown Strap Assembly with Crown Pad: 6-point
suspension system with soft crown pad for extra
comfort and protection against impact.
2. Full Inner Impact Liner System: Protects head
against heat rise and extra protection.
4. Thermoglas® or Thermoplastic Outer Shell: Choice of
helmet platform and material.
5. Aluminized Helmet Cover: Features an elastic edge
binding and Velcro® tabs for easy installation and
a secure fit over the outer shell and eight snaps for
attaching to the aluminized shroud.
6. Aluminized PBI®/Kevlar® 4-layer Shroud: Attach
with snaps to the aluminized helmet cover to block
ingress of heat and foreign matter.
7. 6” Gold-coated Faceshield: NFPA 1971 requires the
use of a 6” gold-coated faceshield for proximity fire
fighting, with anti-scratch lens coating to maximize
durability.
Replacement parts:
(p 90-91)
www.bullard.com
89
AX Series
Accessories &
Replacement Parts
R151
Faceshield Mounting Hardware Kit for AXFX
AX: Accessories &
Replacement Parts
•
•
•
•
R152
Faceshield Mounting Hardware Kit for AXUST
•
•
•
•
R154
Faceshield Mounting Hardware Kit for AXUSRX
•
•
•
•
Aluminum washers
R259
Helmet Cover for AXUSRX
•
•
Made of aluminized PBI®/Kevlar®
NFPA 1971 compliant
R260
Helmet Cover for AXFX
•
•
NFPA 1971 compliant
R261
Helmet Cover for AXUST
•
•
90
NFPA 1971 compliant
AX Series
Accessories &
Replacement Parts
R340
6” Faceshield
Optically correct gold-coated polycarbonate faceshield
Mounting hardware (R151/R152/R154) not included
R756
Shroud
•
•
•
Made of aluminized PBI®/Kevlar® short facepiece
Covers ears, neck, face, and shoulders
For use with R259-helmet cover with snaps (AXUSRX)
R757
Shroud
•
•
•
Made of aluminized PBI®/Kevlar® short facepiece
For use with R260 and R261 helmet cover with snaps
AX: Accessories &
Replacement Parts
•
•
R758
Shroud
•
•
•
•
For use with R260 and R261 helmet cover with snaps
R761
Bottle Cover
•
www.bullard.com
91
Wildland Fire
Helmets
Wildland Fire
Helmets
In This
Section
• Wildfire® Series
• Accessories & Replacement Parts
Fire Helmet
Wildfire® Colors:
Wildfire Series
®
FH911 Series Helmets are NFPA 1977-2011 Certified
Black
White
Red
Yellow
Lime-yellow
Blue
Orange
FH911C
FH911H
Cap style
full brim style
Wildfire® Series
Bullard Wildfire® helmets are specifically engineered
to meet the special needs of wildland and forestry
firefighters. Manufactured from heat-resistant
thermoplastic for superior impact and penetration
protection, Wildfire® helmets meet and exceed the
performance specifications of NFPA 1977-2011.
These models also exceed all major state fire codes
for wildland firefighting. Bullard Wildfire® helmets
also meet ANSI/ISEA Z89.1-2009, Type I, Class E & G
industrial head protection standard.
highlights:
•
•
•
•
Thermoplastic shell
Cap style helmet (FH911C), full brim helmet (FH911H),
or extra-large full brim helmet (FH911XL)
3 goggle clips (GC100)
4 reflective lime-yellow stripes (R536)
•
•
•
•
Adjustable chinstrap (R50) or (R51)
6-point suspension (FRS6PC)
Cotton brow pad (RBPCOTTON)
3 Velcro® material attachment strips inside shell (R220)
Options for WILDFIRE® - No Additional Charge
•
R537 Red-orange reflective striping
www.bullard.com
93
Fire Helmet
Configurations
Bullard Wildfire® sets
the standard in wildland
firefighting.
FH911C - Cap Style with Ratchet
•
•
•
•
•
•
•
•
•
Thermoplastic shell
Cap style helmet
3 goggle clips
Adjustable chinstrap (R50)
6-point Sure-Lock® ratchet (FRS6RC) or pinlock (FRS6PC) suspension
3 Velcro® material attachment strips inside shell
Wildfire® Series
FH911H - Full Brim Style with Ratchet
•
•
•
•
•
•
•
•
•
FH911XL - Extra-large Full Brim Style with Ratchet
•
•
•
•
•
•
•
•
•
94
Thermoplastic shell
Full brim style helmet
3 goggle clips
Thermoplastic shell
Full brim style helmet
3 goggle clips
Fire Helmet
Customizable Parts







Wildfire® Series


1. Crown Straps and Replaceable Cotton Brow Pad:
6-point suspension system provides extra level
of comfort. Available as a pinlock or ratchet
suspension. Can replace brow pad with RBPCOOL,
RBPCOTTON, or RBPVINYL.
2. Leather Ratchet Cover: Available on ratchet models.
Durable and comfortable leather ratchet cover is
replaceable in case of damage.
3. High-Heat Thermoplastic Outer Shell: A specially
formulated advanced color-through thermoplastic shell
with the ultimate in impact and penetration resistance.
5. Chinstrap with Postman’s Slide: Easy to adjust
and secure.
6. Goggle Clips: Keep your goggles in place; no
slipping or sliding on the helmet.
7. Under Brim Anti-glare Strip: Increases the wearer’s
ability for clear, unobstructed vision free of light glare.
8. Shell available in 7 colors.
Replacement parts:
(p 96-100)
www.bullard.com
95
Wildfire® Series
Accessories &
Replacement Parts
100G
Gold Line® Brackets
•
•
Front mounting aluminum bracket
Use with cap style (FH911C)
112G
Gold Line® Brackets
Wildfire: Accessories
& Replacement Parts
•
•
Front mounting aluminum bracket
Use with full brim style (FH911H)
680P
Visor
•
•
•
Clear, heat-formed, multi-fit polycarbonate visor
Size: 6”x 15” x 0.080”
Use with Bullard brackets and most competitive models
860P
Visor
•
•
•
Clear, heat-formed, multi-fit polycarbonate visor
Size: 8”x 15” x 0.060”
Use with Bullard brackets and most competitive models
8S24
Visor
•
•
•
Mesh, black screen visor
Size: 8”x 15” x 24 mesh
Use with Bullard brackets
EL1
•
•
•
96
Compatible with XTO and WFB goggles
NOT NFPA-compliant
Wildfire® Series
Accessories &
Replacement Parts
EL2
Replacement Tinted Goggle Lens
•
•
•
NOT NFPA-compliant
ES5
Essarslv-n
Goggle Sleeve
•
•
ET
Replacement Tear-off Lens Cover
•
•
& Replacement Parts
•
•
Available as 6 lens/pack
FRS6PC
Replacement Suspension
•
•
•
6-point self-sizing pinlock suspension with cotton brow pad
2 vertical adjustment positions in front, 3 in rear
For use with current Wildfire® models (manufactured since March 2008)
FRS6RC
•
•
6-point Sure-Lock® ratchet suspension with cotton brow pad
For use with current Wildfire® models (manufactured since March 2008)
www.bullard.com
97
Wildfire® Series
Accessories &
Replacement Parts
GC100
Goggle Clips
•
•
Self-adhesive
Available as set of 3
R220
Velcro® Kit
& Replacement Parts
•
•
Hook ONLY
Available as 3 pieces/pack
R222
Ear/Neck/Face Shroud
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R223
Ear/Neck/Face Shroud
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
R50
Chinstrap
•
•
Made of Nomex®
Postman’s Slide Fastener
R51
Chinstrap
•
•
98
Made of Nomex®
Quick-Release
Wildfire® Series
Accessories &
Replacement Parts
R160
•
R536
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 4
R537
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 4
R721YLW
Ear/Neck Protector
•
•
•
•
& Replacement Parts
Made of Nomex®
Rip-stop
Yellow color
R726YLW
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
RBPCool
Polartec® Replacement Brow Pad
•
•
•
Wicking material moves sweat away from the worker’s brow
Fits all Bullard suspensions
Easy, Velcro® design
www.bullard.com
99
Wildfire® Series
Accessories &
Replacement Parts
RBPCOTTON
Cotton Replacement Brow Pad
•
•
•
Large, absorbent cotton replacement brow pad
RBPVINYL
& Replacement Parts
Vinyl Replacement Brow Pad
•
•
•
Large, easy-to-clean vinyl replacement brow pad
UBG
Underbrim Anti-glare Decal
•
•
•
Reduces glare
For all helmets, hard hats and caps
Hard hat not included
WFB
ESS Goggle
•
•
•
•
ANSI/ISEA Z87.1-2010 Certified
XTO
ESS Goggle
•
•
•
•
100
Speed clip Quick-Adjust System and extra cushion face foam
Rescue/EMS
Fire Helmets
Rescue/EMS
Fire Helmets
In This
Section
• USRX Series
• Advent® Series
• Accessories & Replacement Parts
www.bullard.com
Fire Helmet
USRX Series
USRX Colors:
USRX Helmets are NFPA 1951-2013 and
Black
White
Red
Yellow
Lime-yellow
Blue
Orange
USRX rescue helmets are engineered “Bullard Tough”
for extreme search and rescue conditions. Featuring a
streamlined design, USRX rescue helmets incorporate
recommendations from USAR teams, extrication
teams, and other rescue professionals. The result
is an integrated assembly of advanced materials
and quality components that provide superior
head protection, comfort, and proven long-lasting
durability.
USRX
highlights:
USRX Series
•
•
•
•
•
•
Ultem® thermoplastic outer shell with M-PACT inner
liner system (R929)
Quick-Attach goggle (IZ4)
Quick-Release 3-point chinstrap (R172)
Options for USRX - No Additional Charge
•
•
•
•
102
R330 4” Faceshield (NOT NFPA 1951-2013 COMPLIANT)
R325 6” Faceshield (NOT NFPA 1951-2013 COMPLIANT)
Fire Helmet
Customizable Parts









1. High Heat Thermoplastic Outer Shell: A specially
formulated advanced color-through thermoplastic shell
with the ultimate in impact and penetration resistance.
2. M-PACT Inner Liner System: Superior protection
is provided by Bullard’s patented M-PACT inner
liner with SmartRidge design, providing increased
protection while remaining lightweight.
4. 3-point Chinstrap with Postman’s Slide: Easy to
adjust and secure.
5. Quick-Attach Blade System: The easiest way
to quickly change out face protection, offered
exclusively by Bullard.
6. Face Protection: Two types of industry leading
ESS goggles are available. Also offered are 4” or
USRX Series

6” optically correct faceshields that eliminate
distortion, reducing eye stress, and fatigue.
8. Ear & Neck Protector: Choose between a Nomex® or
PBI®/Kevlar® material.
9. Optional Decals: Customize your helmet with
Bullard decals.
10.Shell available in 7 colors.
Replacement parts:
(p 104-107)
www.bullard.com
103
USRX Series
Accessories &
Replacement Parts
Essarslv-n
Goggle Sleeve
•
•
FP4
•
•
•
•
USRX: Accessories &
Replacement Parts
IZ4
Goggle with Quick-Attach Blades
•
•
•
•
R154
•
•
•
•
Aluminum washers
R155
Quick-Attach Goggle Hardware Kit
•
•
•
Only compatible with IZ4 and FP4
Glass reinforced nylon Quick-Attach blades
Stainless steel machine screws and nuts
R160
•
104
USRX Series
Accessories &
Replacement Parts
R172
Chinstrap
•
•
•
•
Made of Nomex®
3-point
R325
6" Faceshield
•
•
4" Faceshield
•
•
R400
4-Inch Leather Front Mount
•
USRX: Accessories &
Replacement Parts
R330
R533
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
R534
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
www.bullard.com
105
USRX Series
Accessories &
Replacement Parts
R624
•
ratchet cover
R624L
•
ratchet cover
USRX: Accessories &
Replacement Parts
R634
Cotton Brow Pad
•
•
Fire-retardant
R634L
Leather Brow Pad
•
•
Made of leather
Fire-retardant
R721
Ear/Neck Protector
•
•
•
•
Made of Nomex®
Rip-stop
Black color
R721YLW
Ear/Neck Protector
•
•
•
•
106
Made of Nomex®
Rip-stop
Yellow color
USRX Series
Accessories &
Replacement Parts
R726
•
•
•
•
Made of Nomex®
Rip-stop
Black color
R726YLW
•
•
•
•
Made of Nomex®
Rip-stop
Yellow color
Ear/Neck Protector
•
•
•
•
Rip-stop
Tan color
R746
•
•
•
•
Rip-stop
Tan color
USRX: Accessories &
Replacement Parts
R741
R929
M-PACT Inner Crown System with Cotton Brow Pad
•
nylon crown strap assembly, Velcro® strips, black suspension ring
R929L
M-PACT Inner Liner System with Leather Brow Pad
•
Includes: R624-Sure-Lock® ratchet headband, R634L-leather brow pad, nylon
crown strap assembly, Velcro® strips, black suspension ring
www.bullard.com
107
Fire Helmet ®
Advent Series
Advent® Colors:
White
Advent® Helmets are ANSI/ISEA Z89.1-2009, Type II,
Class E & G Certified
Red
Orange
Yellow
Blue
The Advent® helmet offers paramedics, emergency
medical personnel, hazardous response teams, and
search and rescue a revolutionary concept in head
protection. Advent® offers top, front, side and rear
impact and penetration protection. Available in two
models, Advent® offers a variety of special benefits.
A2
Advent® Series
A1
highlights:
•
•
•
•
•
108
Thermoplastic alloy shell
EPS foam impact liner
EPS foam crown cushion
ABS inner shell
8-point Flex-Gear® ratchet suspension (ADRTSL)
•
•
•
2-point chinstrap with dielectric Quick-Release
buckle - A1 ONLY (A110)
3-point cradle chinstrap with dielectric Quick-Release
buckle - A2 ONLY
Front and side decals available for customization
Fire Helmet
Customizable Parts





Advent® Series


1. Tough Thermoplastic Outer Shell: Provides superior
impact and penetration protection over a wide range of
temperatures.
2. ABS and Foam Core Inner Shell: Protects by
distributing forces of impact over a wide area.
3. 2- or 3-point Chinstrap with Quick-Release Buckle:
Provides safety, versatility, and security.
4. Flex-Gear® Ratchet Headband: Offers quick
adjustment and great fit.
5. 8-point Crown Strap System: Gives stability and
comfort to the end-user.
6. Decals and Pad Printing: Customize your helmet
with a Bullard decal on the front or sides. Pad
printing is available in 8 locations.
7. Shell available in 5 colors.
Replacement parts:
(p 110-112)
www.bullard.com
109
Advent® Series
Accessories &
Replacement Parts
A101
Brow Pad
•
Easy-to-clean vinyl replacement brow pad
A110
Chinstrap
•
•
•
•
Made of Nylon
2-point
Quick-Release buckle
Advent®: Accessories
& Replacement Parts
ADFB
Accessory Blades
•
•
For mounting 4” or 6” firefighter faceshield
Includes blades and hardware
ADRTSL
•
8-point Flex-Gear® ratchet with foam-backed vinyl brow and crown pad
EL1
•
•
•
NOT NFPA-compliant
EL2
Replacement Tinted Goggle Lens
•
•
•
110
NOT NFPA-compliant
Advent® Series
Accessories &
Replacement Parts
ES5
•
•
Essarslv-n
Goggle Sleeve
•
•
Replacement Tear-off Lens Cover
•
•
Available as 6 lens/pack
R325
6" Faceshield
•
•
Mounting hardware (ADFB) not included
& Replacement Parts
ET
R330
4" Faceshield
•
•
Mounting hardware (ADFB) not included
R533
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
www.bullard.com
111
Advent® Series
Accessories &
Replacement Parts
R534
•
•
•
•
Adhesive-backed
Size: 1”x 4”
Set of 5
WFB
ESS Goggle
•
•
•
•
& Replacement Parts
XTO
112
ESS Goggle
•
•
•
•
Speed clip Quick-Adjust System and extra cushion face foam
In This
Section
• Magma™
www.bullard.com
European Style
Fire Helmets
European Style
Fire Helmets
Fire Helmet
Magma Series
Magma™ Colors:
™
Magma™ Helmets are EN 443-2008 Certified; Visor
and Eye Protection is EN 14458-2004 Certified.
Black
White
Red
Fluorescent
Red
Orange
Yellow
Fluorescent
Yellow
Glow
Green
Blue
Silver
NOTE: Our European style FX (FXE) complies with
NFPA and CE requirements.
The new Magma™ helmet system is based on a
platform that enables you to configure your individual
helmet. Whether a type A half-shell helmet or type B
three-quarter-shell helmet, the construction kit offers
it all, while keeping the design thoroughly consistent.
The system allows for customized choices without
compromising comfort, safety and functionality.
Type A
Type B
Three-Quarter-Size shell
Magma™ Series
Half-size shell
highlights:
•
•
•
•
114
The outer shell and visor isolates the entire inside of
the helmet system, protecting against heat, flames,
sparks, and fluids.
The head ring’s simple operation makes it easy to
adjust front and rear height settings and allows for
head sizes of 6.25-8.00 in (50-65 cm).
The strap system’s x-shaped design automatically
adjusts for maximum fit and comfort. *Optional: chin strap with fireman’s buckle
The three-dimensional visor provides maximum
upper and lateral field of view, while also covering
•
•
•
•
the entire face, leaving enough space for goggles or
a respirator mask.
The helmet light adaptor is attached at the
side of the helmet, below the eye line, and can
accommodate most types of helmet lights.
Radio with bone or swan microphones can be easily
mounted without tools to interior attachment points.
The ear-neck protector is made from Nomex®, and
can alternately be worn as a full face protector.
Contact Bullard for complete ordering information.
In This
Section
• Leather Front Styles
• Leather Front Badges & Decals
• Scotchlite® Letters & Numbers
• Front Decals
• Crescent Lettering
• Ceremonial Plaques
www.bullard.com
Helmet
Ornamentation
Helmet
Ornamentation
Helmet Ornamentation
Leather Front Styles
Badge
FIELD HEIGHTS
GAR
LIEUTENANT
HAMILTON
4”, 5”, and 6” Leather Fronts with Metal Badge
•
•
•
•
Available in gold or silver
Choose between small (1.0”) or large (1.6”)
Genuine leather colors: red, black, blue, green, white, orange, and yellow
Patent leather colors: red, black, and white
Decal
INGFIELD
SPR
4”, 5”, and 6” Leather Fronts with Decal
LIEUTENANT
•
•
•
•
Choose between small (1.0”) or large (2.0”)
FDNY
98
DELLINGER
6” New York Style Front with Decal, Hot-stamp, or Sewn Passport Patch
•
•
•
For use with UST helmets
magnetic passport
ANDOVER
Leather Front
Styles
FANNING
6” Leather Fronts with Decal, Hot-stamp, or Sewn Magnetic Passport Patch
•
•
•
•
For use with UST helmets
Removable passport badge attaches with magnetic back
passport
DANIEL
SLOAN
4”, 5”, and 6” Leather Fronts with Hot-stamp, or Sewn Velcro® Passport Patch
•
•
•
Removable passport attaches with Velcro®
recessed
EHEAD FIRE
MOR
CC
U
P RA HIO
FD
116
4”, 5”, and 6” Leather Fronts with Recessed Letters
•
•
Sewn
PEABODY
E1
CAPTAIN
MATTHEWS
4”, 5”, and 6” Leather Fronts with Sewn Letters
•
•
Stamped
4”, 5”, and 6” Leather Fronts with Hot-stamp
•
•
Passport Patches
FDNY Passport Patch
•
•
MAGNETIC PASSPORT PATCH
6” Magnetic Passport Patch with Decal, Hot-stamp, or Sewn Letters
•
•
Leather Front
Styles
98
6” FDNY Passport Patch with Decal, Hot-stamp, or Sewn Letters
STANDARD
4”, 5”, and 6” Standard Velcro® Passport Patch with Decal, Hot-stamp, or Sewn Letters
•
•
www.bullard.com
117
Leather Front
Configurations (401-431)
431
4” Leather Fronts
Various placement options for text,
decals, and badges
• B=Badge, R=Recessed, H=Hot Stamp,
S=Sewn, D=Decal, P=Passport
*Small badges and decals only
•
404*
B,H,S,d
401*
B,r,H,S,D
402*
B,H,s,D
PPL/PPLM
PPL/PPLM
600C
D
600M*
h,s,d,P
600P*
R,H,S,D,P
400P
H
404P*
H,d
Leather Front
Configurations (600M-6nY)
6” Leather Fronts
Various placement options for text,
decals, and badges
• B=Badge, R=Recessed, H=Hot Stamp,
S=Sewn, D=Decal, P=Passport
*Small badges and decals only
Leather Front
Styles
•
601
B,R,H,S,D
602
B,R,H,S,D
603
B,R,H,S,D
604
B,R,H,S,D
605
B,R,H,S,D
606
B,R,H,S,D
606P
H,S,D
607
608
B,R,H,S,D
609
B,R,H,S,D
PNY
610*
B,H,D
118
612
6NY*
R,H,S,D,P
We still offer our 5”
leather fronts. Please
contact Customer Service
for more information.
Leather Front Badges
Badges (a-H)
Leather Front Badges
•
•
•
•
Custom shapes and emblems available
Large or small sizes
Call Customer Service for additional badges
Badge a
Badge B
Badge C
Badge D
Badge F
Badge G
Badge H
Badge E
Leather Front Decals
Leather Front Decals
•
•
•
Available in gold or silver on reflective
white background
Large or small sizes
Call Customer Service for additional decals
Decal a
Decal B
Decal C
Decal D
Decal F
Decal G
Decal H
Decal E
www.bullard.com
Leather Front
Badges & Decals
DecalS (a-H)
119
Scotchlite® Letters
& Numbers
Scotchlite Letters
& Numbers
120
AZ
AZ
AZ
AZ
AZ
AZ
OR400
2” Letter
•
•
Adhesive-backed
Lemon-yellow
OR401
2” Letter
•
•
Adhesive-backed
Red
or402
2” Letter
•
•
Adhesive-backed
White
Or500
2” Letter
•
•
Adhesive-backed
Lime-yellow
Or501
2” Letter
•
•
Adhesive-backed
Red-orange
Or502
2” Letter
•
•
Adhesive-backed
Silver
®
01
01
01
01
01
01
OR450
2” Numbers
•
•
Adhesive-backed
Lemon-yellow
OR451
2” Numbers
•
•
Adhesive-backed
Red
or452
2” Numbers
•
•
Adhesive-backed
White
Or550
2” Numbers
•
•
Adhesive-backed
Lime-yellow
Or551
2” Numbers
•
•
Adhesive-backed
Red-orange
Or552
2” Numbers
•
•
Adhesive-backed
Silver
Front Decals
or140
3” Maltese Cross
•
•
•
2-color
Black and gold design on reflective silver
Design: Tools of trade and “FIRE FIGHTER” printed in black
or145
3” Star Of Life
•
•
•
2-color
White on blue
Design: Star with staff of life
or150
3” Front Decal
•
•
•
1-color
Black design on reflective white
Design: “Firefighter” with eagle emblem
or110
3” Front Decal
2-color
Black and gold design on reflective white
Design: “Chief” with 5 bugles
or130
3” Front Decal
•
•
•
2-color
Black and silver design on reflective silver
Design: “Captain” and 2 axes
Front Decals
•
•
•
or131
3” Front Decal
•
•
•
2-color
Design: “Captain” with 2 bugles
www.bullard.com
121
Front Decals
or132
3” Front Decal
•
•
•
2-color
Design: “Lieutenant” with 1 ax
or133
3” Front Decal
•
•
•
2-color
Design: “Lieutenant” with 1 bugle
or120
3.5” Front Decal
•
•
•
2-color
Black and silver design on reflective white
Design: “Deputy chief” with 4 bugles
or121
3.5” Front Decal
•
•
•
2-color
Design: “Asst. chief” with 3 bugles
or122
Front Decals
3.5” Front Decal
•
•
•
2-color
Design: “Batt. Chief” with 2 bugles
or123
3.5” Front Decal
•
•
•
2-color
Design: “DEPUTY CHIEF” with 3 bugles
or124
3.5” Front Decal
•
•
•
122
2-color
Design: “ASST CHIEF” with 3 bugles
Crescent Lettering
Crescent lettering
(OR300-OR327)
•
•
•
Can be applied to the sides of FX, PX, LT,
USRX, and Advent® Series helmets
Black letters on reflective white background
Size: 7” x 3.5” tall, 5” inner radius
OR300
OR301
OR302
OR303
OR304
OR305
OR307
OR308
OR309
OR310
OR311
OR312
OR313
OR315
OR316
OR320
OR326
OR327
www.bullard.com
Crescent Lettering
Crescent-shaped Lettering
123
Ceremonial Plaques
FIREPLAQUE
Fire Helmet Ceremonial Plaque
•
This unique presentation piece is a memorable reward for years of
dedicated service. It can also be used to commemorate a groundbreaking
event or thank sponsors for their participation on a special project. Each
16” x 20” plaque includes a traditional fire helmet shell and a personalized
engraved plate.
LFPLAQUE
Leather Front Ceremonial Plaque
The leather front ceremonial plaque includes a 6” genuine leather front and
personalized engraved plate. This can be given to commemorate years in
service, special events, and any moment deserving unique recognition.
Ceremonial
Plaques
•
124
In This
Section
• Isotherm® Cooling Vests
www.bullard.com
Body Temperature
Management
Body Temperature
Management
Body Temperature Protection
Isotherm Vests
®
ISO2
Isotherm® 2 Large Cooling Vest
•
•
•
•
Fits M-L sizes (32”-42”)
Includes vest and one set of packs
Flame-retardant fabric
Dark blue
ISO2XL
Isotherm® 2 Extra-Large Cooling Vest
•
•
•
•
Fits XL-2XL sizes (42”-52”)
Dark blue
ISO2HY
Isotherm® 2 Large Cooling Vest
•
•
•
Fits M-L sizes (32”-42”)
Fluorescent yellow fabric
ISO2HYXL
Isotherm® 2 Extra-Large Cooling Vest
•
•
•
Fluorescent yellow fabric
ISOC2
Isotherm®
Cooling Vests
Isotherm® Class 2 Large Cooling Vest
126
•
•
•
•
Meets ANSI/ISEA 107-2010 Class 2 high-visibility requirements
Fluorescent yellow and reflective striping
ISO2P
Replacement Packs
•
•
For ISO2, L size (42”) vest
One set of two packs (front and back)
Body Temperature Protection
Isotherm Vests
®
ISO2V
Replacement Vest
•
•
•
•
For ISO2, M-L sizes (32”-42”)
Vest only
Dark blue
ISO2XLV
Replacement Vest
•
•
•
•
For ISO2, XL-2XL sizes (42”-52”)
Vest only
Dark blue
ISOC2V
Replacement Vest
For ISOC2, XL vest (42”)
Vest only
Fluorescent yellow and reflective striping
Isotherm®
Cooling Vests
•
•
•
www.bullard.com
127
Experience Build Your Bullard...
• T
he industry’s first complete online
product configurator
• C
onfigure your Personal Protection
Equipment at www.BuildYourBullard.com
Easy. Complete. Personal.
Catalog
Index
Symbols
6NY ................................................ 118
8S24 .................................................. 96
100G................................................. 96
112G................................................. 96
400P................................................ 118
401 ................................................ 118
402 ................................................ 118
404 ................................................ 118
404P................................................ 118
431 ................................................ 118
600M............................................... 118
600P................................................ 118
601 ................................................. 118
602 ................................................ 118
603 ................................................. 118
604 ................................................ 118
605 ................................................ 118
606 ................................................ 118
606P................................................ 118
607 ................................................ 118
608 ................................................ 118
609 ................................................ 118
610 ................................................ 118
612 ................................................ 118
680P.................................................. 96
860P.................................................. 96
A
A1 ................................................ 108
A2 ................................................ 108
A101............................................... 110
A110............................................... 110
About Bullard...................................... 2
ACADAPTOR...................................... 22
ACADAPTOR (12-15V)....................... 39
ACADAPTOR20V......................... 22, 39
ACINVERTER...................................... 27
ADFB............................................... 110
ADRTSL............................................ 110
Advent®........................................... 108
AX .................................................. 86
B
BADGE............................................ 116
BADGE A......................................... 119
BADGE B......................................... 119
BADGE C......................................... 119
BADGE D......................................... 119
BADGE E.......................................... 119
BADGE F.......................................... 119
BADGE G......................................... 119
BADGE H......................................... 119
BATTERYKNOBS......................... 22, 48
BATTERYNIMH............................ 22, 48
BATTERYNIMHULTRA................. 22, 48
Build Your Bullard............................ 128
BUMPERKIT................................ 22, 48
C
ECLLDEXT2........................................ 33
ECLLDLCDGUARD....................... 22, 41
ECLLDPM.................................... 22, 41
ECLLDSS............................................ 24
ECLLDWINDOW.......................... 22, 41
ECLMETAL.................................. 22, 41
ECLMETAL160............................ 22, 41
ECLMETAL320............................ 22, 41
ECLNIMH.................................... 22, 42
ECLNTD............................................. 37
ECLPM........................................ 22, 42
ECLPOWERHOUSE............................. 27
ECLPOWERUP................................... 27
ECLPOWERUPUPGRADE.................... 27
ECLRETRACT2................................... 27
ECLSRH.............................................. 37
ECLTEMP........................................... 37
ECLTEMPCOMBO.............................. 38
ECLWINDOW.............................. 22, 42
EDGE160........................................... 38
EDGE160UPGRADE........................... 38
EDGEEXT........................................... 33
EDGEEXT2......................................... 33
EDGEFRONT............................... 22, 42
EDGEHARDCASE........................ 22, 42
EDGEPM..................................... 22, 42
Edge™................................. 16, 22–23
EL1 ......................................... 96, 110
EL2 ......................................... 97, 110
EL3 .................................................. 58
Electronic Thermal Throttle®.............. 12
ES4 ........................................... 58, 71
ES5 ............................ 58, 71, 97, 111
ESSARSLV-N.. 58, 71, 81, 97, 104, 111
ET ......................................... 97, 111
EZEX........................................... 58, 71
CARADAPTOR.................................... 22
CARADAPTOR (12-15V)..................... 39
CASEFOAM................................. 22, 39
CLAMP.............................................. 48
CMDDATACABLE........................ 22, 48
CMDDCCABLE............................ 22, 49
CMDKIT...................................... 22, 49
CMDPM...................................... 22, 49
CMDRCACABLE.......................... 22, 49
CMDTRUCKMNT............................... 49
CMDWINDOW............................ 22, 49
Contact & Ordering Information.......... 3
D
DECAL............................................. 116
DECAL A.......................................... 119
DECAL B.......................................... 119
DECAL C.......................................... 119
DECAL D.......................................... 119
DECAL E.......................................... 119
DECAL F.......................................... 119
DECAL G.......................................... 119
DECAL H.......................................... 119
DUALCHARGERBASE......................... 22
E
ECL160.............................................. 36
ECL160UPGRADE.............................. 36
ECL160UPGRADEPM......................... 36
ECL320.............................................. 36
ECL320UPGRADE.............................. 36
ECLBTD.............................................. 36
ECLBUMPER............................... 22, 39
ECLBUNDLE....................................... 30
ECLCF................................................ 32
ECLCFAM........................................... 32
ECLCFBUNDLE................................... 32
ECLCHARGER (20V)........................... 40
ECLCHARGER20V.............................. 22
ECLCUSTGRAPH................................ 37
ECLDATACABLE.......................... 22, 40
ECLDATACABLERED.................... 22, 40
ECLDATAPOWER........................ 22, 40
ECLETT.............................................. 37
ECLEXT....................................... 32, 33
ECLGLARESHIELD.............................. 27
ECLGLARESHIELDLENS............... 22, 40
ECLHHC............................................. 37
Eclipse®................................ 11, 22–23
Eclipse® 160...................................... 11
Eclipse® LD........................... 10, 22–23
ECLLCDGUARD........................... 22, 40
ECLLDBUNDLE................................... 30
ECLLDCF............................................ 32
ECLLDCFAM...................................... 32
ECLLDCFBUNDLE............................... 32
ECLLDEXT.......................................... 33
www.bullard.com
F
FDNY............................................... 116
FDNY PASSPORT PATCH.................. 117
FH911C............................................. 93
FH911H............................................. 93
FIREPLAQUE.................................... 124
FP2 ........................................... 58, 71
FP3 ........................................... 59, 71
FP4 ......................................... 81, 104
FRS6PC.............................................. 97
FRS6RC.............................................. 97
FX .................................................. 66
G
GC100............................................... 98
H
HANDLE............................................
HANDLETRANSONLY2.......................
HANDLETRANSUPGRADE..................
HARDCASE........................................
27
24
24
27
129
Catalog
Index
I
ISO2 126
ISO2HY............................................ 126
ISO2HYXL........................................ 126
ISO2P.............................................. 126
ISO2V.............................................. 127
ISO2XL............................................ 126
ISO2XLV.......................................... 127
ISOC2.............................................. 126
ISOC2V............................................ 127
Isotherm®................................ 125–127
IZ2 ........................................... 59, 72
IZ3 ........................................... 59, 72
IZ4 ......................................... 81, 104
L
LCDGUARD................................. 22, 43
LFPLAQUE....................................... 124
LTX .................................................. 78
M
Magma™........................................ 114
MAGNETIC PASSPORT..................... 116
MAGNETIC PASSPORT PATCH......... 117
MCCANTENNA........................... 22, 43
ML1.................................................. 24
ML2.................................................. 24
MLANTENNA.............................. 22, 43
MLKNOB.................................... 22, 43
MLSTRAP.................................... 23, 43
MLUPGRADE..................................... 24
MTSSTRANS2UP................................ 50
MX ............................................ 22–23
MXPM........................................ 23, 50
P
PASSPORT....................................... 116
PNY................................................ 118
POWERHOUSE................................... 28
POWERHOUSEKIT.............................. 28
PPL/PPLM........................................ 118
PX .................................................. 68
N
NFPANIMH................................. 23, 43
NFPA Standards................................. 65
NIMH.......................................... 23, 44
O
R
OMNI......................................... 23, 50
OMNIONLY................................. 23, 50
OR110............................................. 121
OR120............................................. 122
OR121............................................. 122
OR122............................................. 122
OR123............................................. 122
OR124............................................. 122
OR130............................................. 121
OR131............................................. 121
OR132............................................. 122
OR133............................................. 122
OR140............................................. 121
OR145............................................. 121
130
R158........................................... 60, 73
R160...................... 61, 73, 82, 99, 104
R172................................................ 105
R220.................................................. 98
R222.................................................. 98
R223.................................................. 98
R259.................................................. 90
R260.................................................. 90
R261.................................................. 90
R309.................................................. 61
R325.................... 61, 73, 82, 105, 111
R330.................... 61, 73, 82, 105, 111
R334.................................................. 61
R340.................................................. 91
R400................................... 73, 82, 105
R533.......................... 73, 82, 105, 111
R534.......................... 74, 82, 105, 112
R535.................................................. 61
R536.................................................. 99
R537.................................................. 99
R539.................................................. 62
R545.................................................. 62
R549.................................................. 62
R624......................................... 83, 106
R624L....................................... 83, 106
R628..................................... 62, 74, 83
R634......................................... 83, 106
R634L....................................... 83, 106
R635........................................... 62, 74
R635L......................................... 62, 74
R637........................................... 63, 74
R637L......................................... 63, 74
R721............................ 63, 74, 83, 106
R721YLW............... 63, 75, 83, 99, 106
R726............................ 63, 75, 84, 107
R726YLW............... 63, 75, 84, 99, 107
R727.................................................. 75
R741............................ 64, 75, 84, 107
R746............................ 64, 75, 84, 107
R756.................................................. 91
R757.................................................. 91
R758.................................................. 91
R761.................................................. 91
R921........................................... 64, 76
R921L......................................... 64, 76
R929......................................... 84, 107
R929L....................................... 84, 107
RBPCOOL.......................................... 99
RBPCOTTON.................................... 100
RBPVINYL........................................ 100
RCN17ALK......................................... 28
REC2................................................. 25
RECESSED........................................ 116
RECUPGRADE.................................... 25
OR150............................................. 121
OR300............................................. 123
OR301............................................. 123
OR302............................................. 123
OR303............................................. 123
OR304............................................. 123
OR305............................................. 123
OR307............................................. 123
OR308............................................. 123
OR309............................................. 123
OR310............................................. 123
OR311............................................. 123
OR312............................................. 123
OR313............................................. 123
OR315............................................. 123
OR316............................................. 123
OR320............................................. 123
OR326............................................. 123
OR327............................................. 123
OR400............................................. 120
OR401............................................. 120
OR402............................................. 120
OR450............................................. 120
OR451............................................. 120
OR452............................................. 120
OR500............................................. 120
OR501............................................. 120
OR502............................................. 120
OR503............................................... 59
OR550............................................. 120
OR551............................................. 120
OR552............................................. 120
OR600............................................... 59
OR600ML.......................................... 59
R50 .................................................. 98
R51 .................................................. 98
R112........................................... 60, 72
R141.................................................. 81
R142.................................................. 81
R144.................................................. 72
R146.................................................. 72
R148.................................................. 60
R151........................................... 72, 90
R152........................................... 60, 90
R154................................... 81, 90, 104
R155......................................... 82, 104
R156.................................................. 60
R157.................................................. 60
S
Save-A-Life Club................................ 14
Save or Apprehension Recognition
Program..................................... 19
Catalog
Index
SE35EXT............................................ 33
Service, Training & Warranty.............. 20
SHSTRAP.................................... 23, 50
SINGLECHARGERBASE............... 23, 51
Spotlight
Electronic Thermal
Throttle®....................................12
NFPA Standards...............................65
Save-A-Life Club..............................14
Save or Apprehension Recognition
Program.....................................19
Service, Training & Warranty.............20
Super Red Hot..................................13
What Goes Into a Bullard
Fire Helmet?...............................77
White-Hot, Black-Hot &
Nocturnal Mode.........................18
SS .................................................. 25
SSTRANS2......................................... 25
SSTRANS2UPGRADE......................... 25
SSUPGRADE...................................... 25
SSUSB......................................... 23, 44
STAMPED........................................ 117
STANDARD...................................... 117
STRAPKIT.................................... 23, 51
STRAPSCREWS........................... 23, 51
Super Red Hot................................... 13
T
T3ALK................................................ 28
T3CHARGER20V......................... 23, 44
T3COMBOSTRAP........................ 23, 44
T3GLARESHIELD................................ 28
T3GLARESHIELDCLIPS................ 23, 44
T3GLARESHIELDLENS................. 23, 44
T3HANDLE......................................... 29
T3MAX................................................ 9
T3MAXBUNDLE................................. 31
T3MAXBUNDLESS............................. 31
T3MAXCASEUPGRADE...................... 29
T3MAXEXT........................................ 34
T3MAXEXT2...................................... 34
T3MAXTTBUNDLE............................. 31
T3MAXTTBUNDLESS.......................... 31
T3MAXTTEXT.................................... 35
T3MAXTTEXT2.................................. 35
T3MAXTTUPGRADE.......................... 38
T3NIMH...................................... 23, 45
T3PERSONALSTRAP.................... 23, 45
T3PM.......................................... 23, 45
T3PMKIT..................................... 23, 45
T3POWERUP...................................... 29
T3POWERUPUPGRADE...................... 29
T3RETRACT....................................... 29
T3 Series...................................... 22–23
T3SP ........................................... 23, 45
T3STRAPKIT................................ 23, 45
T3TRANSKNOB........................... 23, 46
T3TRANSONLY2................................. 26
T3TRANSUPGRADE........................... 26
T3WINDOW................................ 23, 46
T4GLARESHIELD................................ 29
T4LCDGUARD............................. 23, 46
T4MAX................................................ 6
T4MAXBUNDLE................................. 31
T4MAXBUNDLESS............................. 31
T4MAXCASEUPGRADE...................... 29
T4MAXCF.......................................... 32
T4MAXCFAM..................................... 32
T4MAXEXT........................................ 35
T4MAXEXT2...................................... 35
T4N .................................................... 7
T4NBUNDLE...................................... 31
T4NBUNDLESS................................... 31
T4NCASEUPGRADE........................... 29
T4NCF............................................... 32
T4NCFAM.......................................... 32
T4NEXT............................................. 35
T4NEXT2........................................... 35
T4PM................................................. 23
T4PMKIT..................................... 23, 46
T4 Series...................................... 22–23
T4WINDOW................................ 23, 46
T320 .................................................... 8
T320BUNDLE..................................... 30
T320BUNDLESS................................. 31
T320CASEUPGRADE.......................... 28
T320EXT............................................ 34
T320EXT2.......................................... 34
T320TTBUNDLE................................. 31
T320TTBUNDLESS............................. 31
T320TTEXT........................................ 34
T320TTEXT2...................................... 34
T320TTUPGRADE.............................. 38
Table of Contents................................ 4
www.bullard.com
TACPM....................................... 23, 47
TACPMKIT.................................. 23, 47
TACPORT........................................... 30
TACSCOPE......................................... 30
TacSight® S1/S2........................... 22–23
TacSight® SE35..................... 17, 22–23
TACSIGHTSE35KIT............................. 32
TACSIGHTSE35KIT2........................... 32
TACSS................................................ 26
TACSSTRANS2................................... 26
TACSSTRANS2UPGRADE................... 26
TACSSUPGRADE................................ 26
TACSTRAPKIT............................. 23, 47
TACWINDOW............................. 23, 47
Reference Table................... 22–23
TI Commander............................. 22–23
TIDCPOWERCORD...................... 23, 51
TIGLARESHIELD................................. 51
TIMXPMKIT................................ 23, 51
TIPM........................................... 23, 52
TISP........................................... 23, 52
TI/TIx........................................... 22–23
TIWINDOW................................. 23, 52
TRIPOD.............................................. 52
TRUCKMNT....................................... 52
U
UBG................................................ 100
USRX............................................... 102
UST6.................................................. 54
USTBLOCKKIT.................................... 64
USTM6.............................................. 54
W
WFB ....................................... 100, 112
What Goes Into a Bullard
Fire Helmet?.............................. 77
White-Hot, Black-Hot &
Nocturnal Mode........................ 18
WINDOWSCREWS...................... 23, 47
X
XTO ....................................... 100, 112
131
Americas:
Bullard
1898 Safety Way
Cynthiana, KY 41031-9303
Toll-free within USA:
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987
Europe:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen
Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176
©2013 Bullard. All rights reserved. Advent, Eclipse, Electronic Thermal Throttle, Isotherm, and TacSight are registered trademarks of Bullard. Edge and Magma are
trademarks of Bullard. Velcro is a registered trademark of Velcro USA. Nomex and Kevlar are registered trademarks of DuPont Company. Scotchlite is a registered trademark
of 3M Company. PBI is a registered trademark of Celenese. FirePro is a trademark of ESS, a Subsidiary of Oakley, Inc. Pelican is a trademark of Pelican Products, Inc.

Product Catalog Emergency Responder

Transcription

Similar documents

InsulTech Sales sheets mech

μ TIR640 PORTABLE BROADBAND MICRO-TIR IMAGER FOR AIR & GROUND USE

SAFEDRIVE. Drive Safe. Save Lives.

Stachti Thermal Springs

protect - Steico

Buildings – heating and cooling

Thermal Night Vision - Thermoteknix Systems Ltd

EP / FP-700

Foam W5 - SIG Insulation

Diapositive 1