AVX Highlights Technology & Application Solutions at a Glance Committed to excellence

AVX Highlights
Committed to excellence
Technology & Application
Solutions at a Glance
Consult | Components | Logistics | Support
Committed to excellence
Consult – Know-how. Built-in.
AVX Product Overview
04 / 05
Connectors
06 – 12
Timing Devices
13 – 17
Advanced:
Circuit Protection
RF Products
High Voltage Capacitors
18 – 22
23
24
Film
25 / 26
Ceramic
27 – 29
Tantalum
30 – 32
electromechanical components, storage, displays & boards
Rutronik Electronics worldwide
33
and wireless technologies for optimum coverage of your
Rutronik webg@te
34 / 35
The technical competence from Rutronik
Pan-European and individual consulting on the spot: by
competent sales staff, application engineers and product
specialists.
Components – Variety. Built-in.
The product portfolio from Rutronik
Wide product range of semiconductors, passive and
needs.
Logistics – Reliability. Built-in.
The delivery service from Rutronik
Innovative and flexible solutions: from supply chain
management to individual logistics systems.
Support – Support. Built-in.
The qualification drive from Rutronik
Technical support: through online services, seminars, PCNs,
quality management and much more.
2
Melanie Klotz
European Linemanagement Rutronik
Rutronik & AVX – A strong partnership
Rutronik is a long standing partner of AVX and one of AVX’s most important
franchised distributors. Our cooperation with AVX goes back more than 10 years
and we established a perfect partnership between the two companies in Product
Marketing, Field Sales and Technical Support. We offer via our outstanding logistic
solution and technical service all AVX products to customers in a broad area of
Industries. Customers in areas such as telecommunications, information technology
hardware, automotive electronics, medical devices and instrumentation, industrial
instrumentation and consumer electronics.
AVX Corporation is a leading worldwide manufacturer and supplier of a broad line
of passive electronic components and interconnect solutions. Virtually all types of
electronic devices use AVX passive component products to store, filter or regulate
electrical energy.
The AVX passive electronic component products include ceramic and tantalum
capacitors, film capacitors, varistors, filters and other components manufactured
in eighteen AVX facilities throughout the world and passive components manufactured by Kyocera Corporation who is the major AVX stockholder. AVX also
manufacture electronic connectors and inter-connect systems and distribute and
sell certain electronic connectors manufactured by Kyocera.
Creating Technology Leadership
AVX has research and development locations in the United States, United Kingdom,
Czech Republic, France and Israel. Each year AVX develops numerous new products
and lately AVX has won several awards that recognize their technology leadership.
Such product development is tied into the AVX strategy to take on the challenges
facing the world in electronics from tomorrow. Sectors such as Green Energy Solutions, Improving the Quality of Life, Increasing Battery Life, Protecting Circuits and
allowing high speed transmission of data and video.
Providing a Broad Product Line
We believe that the breadth and quality of the AVX product line and their ability to
quickly respond to our customers’ design and delivery requirements make them the
provider of choice for our multinational customer base. We differentiate ourselves by
providing our customers with a substantially complete passive component solution.
Our
Product portfolio
Semiconductors
Passive
Components
Electromechanical
Components
Displays &
Boards
Storage
Technologies
Wireless
Technologies
Lighting
Solutions
Photovoltaic
Solutions
Melanie Klotz
3
AVX Product Overview
Advanced
Ceramic
Tantalum
■ Best Caps/Super Caps
■ Capacitor Arrays
■ Leaded Tantalum Capacitors
■ Discoidal/Emi Filters
■ High Voltage MLC
■ Niobium Oxide Capacitors
■ Emi Surface Mount Filters
■ Low Inductance
■ Surface Mount Capacitors
■ High Voltage Chips
■ RF/Microwave
■ Microchip
■ Feed Thru Filters
■ Surface Mount MLC
■ Wet Tantalum Capacitors
■ Passive Micro Circuits
■ Power Film Capacitors
■ RF Capacitors
■ Single Layer Capacitors
■ Switch Mode Super Capacitors
■ Thermistors
■ Multilayer Varistors
4
Kyocera
Connectors
Electronic Devices
■ Custom Automotive
■ FFC/FPC Connectors
■ Actuators
■ Board-to-Board
■ Micro Pitch Board to Board
■ Crystals and Oscillators
■ Wire-to-Board
Connectors
■ Resonators
■ Solid State Lighting
■ Memory/Sim Connectors
■ Resistive Products
■ Battery
■ Wire/Wire &
■ RF Modules
■ Speciality Electronics
Wire to Board Connectors
■ Saw Devices
■ Lighting Connectors
■ Interface Connectors
5
FFC/FPC Connectors
With one of the broadest ranges of FFC/FPC connectors in the industry, AVX Kyocera have parts to suit cables from 1.25mm pitch,
all the way down to 0.2mm pitch for the latest in electronic devices. For more robust applications AVX/Kyocera have ranges in
0.5mm and 1.0mm pitch that use “secure locking” to give the best solution.
With all styles covered there is no other place to go for FFC/FPC connector technology.
Pitch
0.3mm
FFC/FPC Thickness
t0.15
SMT or DIP
STRAIGHT
or
VERTICAL
ZIF
LIF
RIGHT ANGLE
ZIF
0.5mm
t0.2
1.0mm
t0.3
SMT
SMT
SINGLE
SINGLE
1.25mm
t0.3
t0.3
SMT
DIP
6214
6801
6251
6208
6208
6205
6244
6232
6232
6216
DUAL
6841
6266
6226
TOP
6283
6252
6212
6224
6295
6296
6299
6210
6288
6200
6200
6293
6842
6277
6800
6232
6228
6232
6232
BOTTOM
DUAL
LIF
t0.2
TOP
BOTTOM
DUAL
6284
6207
6227
Focus FFC/FPC Connectors – numbers represent product series
Features and Benefits
Applications
■ One of the widest choices of FFC/FPC connectors in the
industry.
■ Assembly makes production fast and easy.
■ Many parts offered in Tape and Reel for SMT automatic
placing.
■ Plating on contacts and tails offered in choice of tin/copper
alloy or gold in many cases.
■ Increasing number of “secure lock” connectors to give added
functionality.
■
■
■
■
■
6
SMT
Mobile phones and consumer devices
In-car automotive electronics
Industrial electronics
Metering
Handheld equipment
DIP
8370
6216
6216
6207
8370
Secure Locking FFC Connectors
FFC connectors are fast becoming the default method of connecting systems and clusters within the cabin of the passenger and
commercial vehicle. Offering savings in size and weight gives more flexibility for the design engineer. The main concerns for FFC
connectors has always been the correct alignment of the cable and withstanding automotive conditions such as high temperature
and vibration. The AVX/Kyocera series of secure locking FFC/FPC connectors address both concerns and offer a high reliable connection for any in-cabin application.
Features and Benefits
Applications
■ Same shaped FFC/FPC cable allows accurate positioning
of cable in connector and one cable specification for all.
■ Once closed almost impossible for accidental removal
■ Standard 0.5mm pitch with gold flash finish for higher
reliability soldering
■ Vertical version has optional “cable detect” contacts
■
■
■
■
■
■
■
Automotive audio/visual electronics
Satellite navigation systems
Instrument clusters
Steering controls
Internal mirror heating/controls
Industrial electronics
Medical electronics
Available Pin Counts
Series
Number
Pin Count
8
6288
10
12
15
16
20
24
26
30
40
45
50
55
60
64
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
6801
6251
x
x
x
x
Technical Data
Series
6288
6801
6251
Profile Height
2.0mm
5.5mm
4.95mm
Contact Location
Bottom
Vertical
Vertical
Pitch
0.5mm
0.5mm
0.5mm
Rated Current
AC/DC 0.4A
AC/DC 0.4A
AC/DC 0.4A
Rated Voltage
AC/DC 50V
AC/DC 50V
AC/DC 50V
Withstand Voltage
AC 200Vrms/min.
AC 200Vrms/min.
AC 200Vrms/min.
FPC Thickness
0.3mm
0.3mm
0.3mm
7
Board to Board Connectors
From stacking heights of just 0.5mm (series 5803) to 20mm,
and pitch of 0.4mm to 2.54mm, AVX/Kyocera have some of
the smallest and technology-leading products in the industry.
Common across many of the parallel mating products is the
patented “Twin-rib” structure giving high retention force and
self-cleaning on un-mating.
20.0
5061
5072
Stacking height
(Parallel mate)
5077
Series#
Mating
height
10.0
12.0
~
20.0
Verticalmate
8.0
~
19.0
5015
8.0
~
15.0
5608
5.0
&
9.0
5047
5.0~7.0
5.0
5609
8272
2.0
8071
P/F
8072
5061
1.27
3.0~4.5
5846
8345
DIP
P/F
3.0
4.2
7.0
5046
3.0
5078
2.54
5087
DIP
5072
2.0~4.0
2.0
5604
1.5~2.4
1.5
5602
1.0
5802
5804
5802
5801
1.0
5078
SMT
0.8
5600
SMT
DIP
SMT
0.8
5803
Height
0.4
[mm] Pitch
Pitch
0.5
0.8
1.0
Series
1.27
Product overview
Focus products
Kyocera Elco has a long history in micro-pitch board to board products and a wide availability of circuit sizes at 0.4mm
pitch and 0.5mm pitch products in a range of varied stacking heights.
Pitch
Series
Height
[mm]
Available Pin Counts
10
12
14
16
18
20
22
24
26
30
32
34
36
40
44
50
54
60
64
70
74
1.5
1.7
5602
2.0
2.8
5.0
0.4mm
5805
1.0
5801
0.8
5802
0.8
5804
0.9
5846
3.0
2.0
5087
2.5
(3.0)
3.0
3.5
5046
4.0
0.5mm
4.5
5.0
5047
7.0
1.5
5604
2.0
5647
7.0
2.4
Mass Production
8
Samples Available
Not Available yet
Tooling Up
80
90
100
110
120
140
240
Discrete Wire IDC
IDC & Wire to Board Connectors
Discrete Wire IDC
The 917x series of surface mount insulation displacement connectors were developed to meet the harsh automotive and industrial
market applications for connecting individual wires direct to the PCB. The simplicity of inserting a wire into the connector using a
small tool allows a wide range of devices to be connected to the PCB without the need for soldering. The various parts in the series
allows the connection of wire sizes from 14 to 28AWG, current of up to 15 Amps and 125 – 600 VAC.
Features and Benefits
Applications
■ IDC provides a gas tight connection
■ Can be over moulded
■ Tested to automotive levels of shock vibration
and temperature cycling
■ Reduced cost when compared to solder or crimp processes
■ Connecting discrete wires to a PCB
■ Power and signal line connections
■ Daisy chaining PCBs
Discrete Wire to Board: Poke Home Connectors
The 9276 series provides a reliable wire to board termination in a leak 2.5mm pitch SMT package for a broad range of industrial and
commercial markets. Simply strip off the insulation and poke home. High spring force Beryllium Copper upper contacts incorporating a second lower contact provides good wire retention and a current rating of 6 Amps. Easy to use in either the factory or the field.
Features and Benefits
Applications
■
■
■
■
■
■
■
■
Simply strip the insulation and insert
18-24AWG solid or stranded wires
Release tool available
1, 2, 3, 4, 6 & 8 way with a small PCB footprint
Connecting discrete wire components to the PCB
Power and signal line connections
Daisy chaining PCBs
Field installation of equipment
9
Lighting Connectors
Board to Board Connectors – Series 9159
The 9159 connector series is a board to board interconnect system that allows two PCBs to be mated end-to-end creating strips of
LED lighting. This allows the designer to build a single PCB with a plug at one end and a receptacle at the other that can be joined
to create a lighting strip of the desired length. This minimises cost and inventory. The range includes male and female connectors,
locking clips for extra reliability, a two-way shorting socket and a male wire to board plug. Making it a versatile connection system.
Features & Benefits
Applications
■
■
■
■
■
■ Solid state lighting
One PCB footprint for all board mounted parts
Board to Board/Wire to Board connection available
5A per contact on 2-6 way
Locking clip available for added security
ZIF BTB connection available to speed assembly
Solid State Lighting Connectors – New Series 9608/9609
Brand new from AVX/Kyocera is the range of SSL connectors specifically made for lighting applications.
Featuring one of the lowest profile heights in the world - just 1.4mm - the series comes with a common
base and choice of insert from wire to board, joint and jumper.
Series 9608
Series 9609
No. of Positions
2, 3 Pos. (Contact us for other pin counts.)
No. of Positions
1 Pos.
Stacking Height
JOINT / JUMPER: 1.4mm, Wire to Board: 1.85mm
Stacking Height
JOINT / JUMPER: 1.4mm, Wire to Board: 3.0mm
Pitch & Applicable
Wire Sizes
2.4mm Pitch: AWG #26 to 22
(Coated outer dia. 0.98 to 1.4mm)
1.2mm Pitch: AWG #30 to 28
(Coated outer dia. 0.5 to 0.63mm)
Applicable
Wire Sizes
UL10368 AWG #26 to 22
Rated Current
3A / Contact
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #26): 1A / Contact
Rated Voltage
AC/DC 250V
D.W.Voltage
AC 500Vrms / min.
Rated Current
3A / Contact (any two positions)
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #30 to 26): 1A / Contact
Rated Voltage
2.4mm Pitch: AC/DC 250V
1.2mm Pitch: AC/DC 125V
D.W.Voltage
2.4mm Pitch: AC 1,000Vrms / min.
1.2mm Pitch: AC 500Vrms / min.
Contacting Length
Horizontal: 0.8mm
Vertical: 0.4mm
Floating Structure
±0.1mm along the X-axis and ±0.2mm along the Y-axis of
respective connectors
(±0.2mm along X-axis and ±0.4mm
along Y-axis in total between the connected boards)
Creepage Distance of
Insulation
3.0mm Min. secured
Contact Material
Copper alloy
Insulator Material
Heat resistant plastic
10
Contacting Length
Vertical: 0.4mm
Floating Structure
±0.1mm along the X-axis and ±0.2mm along the Y-axis of
respective connectors (±0.2mm along X-axis and ±0.4mm
along Y-axis in total between the connected boards)
*creepage, contact and insulator material is same for both series.
Memory/SIM Connectors
Traditionally memory and SIM connectors have been used in consumer devices, such as mobile phones or digital cameras. Now they
are used in many applications in industrial and commercial design and the AVX/Kyocera portfolio reflects this with products for all
areas of use. A range of memory cards with standard and push/push operation find applications in industry, while the series of SIM
connectors extend from simple SIM blocks to high end push/push connectors with metal shells and optional locks for high reliability.
Part Number
Pin count
Style
Part Number
Pin count
Style
8
MicroSD – Push/Push
MiniSD – with boss
045036006200862+
6
Without locking
045138008100858+
045036006201862+
6
Without locking
145338011100862+
11
045036006211862+
6
Without locking
145338011110862+
11
MiniSD – without boss
9
SD – Normal without eject
045036008210862+
8
Without locking
145638009211859+
055036006202862+
6
With locking
145638009511859+
9
SD – Normal with eject
055036006203862+
6
With locking
145638109211859+
9
SD – Reverse without eject
045036006223862+
6
With locking
145638109511859+
9
SD – Reverse with eject
145738009220859+
9
SD – Push/Push normal inner tails
145738009302859+
9
SD – Push/Push normal outer tails
145738009784859+
9
SD – Push/Push reverse outer tails
Applications
■ Metering systems
■ In-vehicle GSM
■ Vending machines
Applications
■ Communications
■ Machine to machine
■ Industrial modems
■ Industrial automation
■ Consumer electronics
■ In-vehicle multimedia
■ Alternative energy systems
■ Security camera systems
■ Medical electronics
11
Spring Loaded Connectors
Single Piece Board to Board 2row Stacker Connector Series 9158
Standard range of stacker connectors available in 16, 20, 24 & 28 contact positions.Various heights
are available from 2 to 4mm, but custom products can be manufactured from 1.2 to 12mm.
Features & Benefits
Applications
■
■
■
■
■
■
■
■
One piece connectors mates direct with PCB
Variety of connector heights available without footprint change
Allows PCB movement without connection loss
Suitable for rigid PCB & flex
Handsets
Handheld medical devices
Mobile industrial units
PDA
Standard Battery Connector 2.5mm Pitch, 3mm High - Series 9155
Standard range of battery connectors available in 3, 4 & 5 contact positions. Various contact nose heights
are available to offer the customer spacing options.
Features & Benefits
Applications
■
■
■
■
■
■
■
■
Connectors are end to end stackable
Variety of contact heights available without footprint change
All contacts are 3A rated
Suitable for 5000 mechanical operations
Low Profile Battery Connector
2.5mm Pitch, 1.3mm High
12
Reduced Size Battery Connector
2.5mm Pitch, 2.5mm High
Handsets
Handheld medical devices
Mobile industrial units
PDA
Right Angled Battery
3mm pitch, 6mm High
2-Part Battery Connector System
4mm Pitch
Right Angled Battery
2.5mm pitch, 4mm High
Timing Devices
AVX/Kyocera is a leading timing device manufacturer of both ceramic & crystal timing device production in the world.
Specialists for piezo-ceramic electronic devices provide insight into the following scopes:
■ Resonators
■ Filters
But what is a resonator and what are the differences
from a quartz crystal?
A resonator is a clock-pulse generator for electrical vibrations,
like a crystal but with ceramic substrate. On the right, you can
see the differences between a resonator and a quartz crystal.
Type
Ceramic Resonator
Frequency range
2.0 – 70 MHz
3.5 – 120 MHz -
Quartz Crystal
Size
small -
big
Rise time
quick (about 100 times faster)
slow
Shock resistance
strong -
Not strong
Element
ceramic
crystal
Tolerance
±0.3 % to ±1.3 %
±10 ppm to ±150 ppm -
Capacitance
integrated -
external
Drive level
no problem -
need to take care
Price/Costs
not expensive -
expensive
Conclusion:
Loop Gain & Phase Shift
According to any customers requirement AVX/Kyocera can
offer the best solution from various kinds of timing device
product line up.
Resonator with Built-in capacitor
Correct Loop Gain and Phase Shift leads to a proper clock-signal
But what about the tolerances?
For many applications a resonator is the right choice, because it is cheaper than a quartz crystal.
Below you can see a graphic of the development of resonator tolerances.
Conventional
products
Initial frequency
tolerance
Temperature characteristics
(–40 °C … +125 °C)
Frequency aging
±2000
±4000
±3000
Total frequency
tolerance: ±9000
Tight tolerance
products
±1000
±1300
±700
Unit: ppm
Total frequency
tolerance: ±3000
Tolerance evaluation of resonators in the last few years
13
Timing Devices in Automotive Applications
Information, Multimedia
Device connectivity
TPMS
Display
Navigation
Roof system
Parking sensor
Telematics
Camera
ABS, Airbag, Millar,
Window, Wiper
Access control
Body, Engine control
Comfort
Crystal Oscillators
TCXO
Crystal resonators
Ceramic resonators
Saw resonators
Saw filters
■ Information
■ GPS navigation /
■ Body electric control
■ ABS, airbag,
■ ABS, Airbag
■ Millar, window,
■ RKE / TPMS
■ RKE / TPMS
■ GPS navigation /
system
■ Camera
telematics
engine control
■ RKE / TPMS
■ Display control
14
wiper control
telematics
Crystal Units – Highlights
KHZ CRYSTAL ST3215S Series
■
■
■
■
■
3.2 x 1.5 x 0.8 mm (typ.)
32.768 KHz
CL = 12.5 pF or 9.0 pF
Freq. tolerance: ± 20 ppm
Freq. temp. characteristic:
±200 ppm
■ Equivalent series resistance:
70kΩ max.
■ Operating temp. range: -40 to +85 °C
Key Features
Applications
■ High reliability by Kyocera’s own
ceramic package
■ High productivity by new design
with patented technology
■ Industry established performance
■ Frequency tolerance: ± 20 ppm
■ Equivalent series resistance:
70 kΩ max.
■ Operating temp. range:
-40 to +85 °C
■ Pb Free/RoHS compliant
■
■
■
■
■
Consumer
Mobile equipments
Modules
General industrial
Automotive
GPS TCXO KT3225 & 2520 AAW Series
Wide Temperature Series
Key Features
Applications
AVX/Kyocera have developed a new GPS
TCXO, which can achieve ± 0.5 ppm
tolerance at as low as -40 °C.
■ The mentioned tolerance is generally
required in automotive GPS. In comparison to other TCXO suppliers AVX/
Kyocera achieved this tolerance with
raw material which is normally used for
TCXO for high volume markets such
as mobile phones. AVX/Kyocera can
offer this high performance GPS TCXO
with reasonably low cost.
■ TCXO achieve: ±3.0 ppm
@ -40 ~ +105°C which is potentially
required for module application where
PA generate high heat.
■
■
■
■
■
■
■ 3.2 x 2.5 mm and 2.5 x 2.0 mm size
■ Many different frequencies
■ ± 0.5 ppm frequency tolerance vs
temperature @ -40 ~ +85°C.
Automotive GPS
Marine navigation
High-end industrial electronics
GPS modules and other modules
General industrial
Automotive
15
Crystal Units Products Line UP
Series
Hight
Package Size
[mm]
Frequency
Range
Load Capa
(STD)
Frequency
Tolerance
(STD)
Frequency
Temperature
Operating
Temperature
Range
Key
Applications
CX3225CA
Smallest
Package
3.2 x 2.5 x 0.8
9.800 ~
54.000 kHz
8 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
■ Automotive -
CX3225GA NEW
Solder Junction
Solution
3.2 x 2.5 x 0.8
9.800 ~
54.000 kHz
8 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
CX3225SA
4 Terminal EMI
Solution
3.2 x 2.5 x 0.75
9.800 ~
54.000 kHz
8 pF
±50 ppm
±200 ppm
-40 to +125/150 °C
CX5032SA
Better Solder
ability and Rust
Prevention
5.0 x 3.2 x 0.85
8.000 ~
40.000 kHz
12 pF
±50 ppm
±200 ppm
-40 to +125/150 °C
CX5032GA
Low Profile
Package
5.0 x 3.2 x 1.3
8.000 ~
40.000 kHz
12 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
CX8045JA
J-Lead Type for
Better Solderability
8.0 x 4.5 x 1.9
4.000 ~
30.000 kHz
12 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
CX8045GA
Low Profile
Package
8.0 x 4.5 x 1.8
4.000 ~
30.000 kHz
12 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
CX1255GA
Ceramic
Package of Low
Frequency
11.8 x 5.5 x 2.5
3.500 ~
20.000 kHz
12 pF
±100 ppm
±200 ppm
-40 to +125/150 °C
ST3215SA NEW
Miniature
Package
3.2 x 1.5 x 0.8
32.768 kHz
12.5 pF
±20 ppm
±200 ppm
-40 to +125 °C
CX1612SB NEW
Industrial
Smallest
Package
1.6 x 1.2 x 0.3
30.000 ~
60.000 kHz
8 pF
±15 ppm
±15 ppm
-10 to +70 °C
CX2016DB/ SB
Low Profile
Package
2.0 x 1.6 x
0.4/0.5
SB: 18.000 ~
23.999 kHz
DB: 24.000 ~
60.000 kHz
8 pF
±15 ppm
±15 ppm
-10 to +70 °C
High Reliability /
AEC-Q 200
Reliability
CX2520DB/ SB
Ultra Small
Covering
2.5 x 2.0 x
0.45/0.5
SB: 13.560 ~
15.999 kHz
DB: 16.000 ~
60.000 kHz
8 pF
±15 ppm
±15 ppm
-10 to +70 °C
CX3225SB
Low Profile
Package
3.2 x 2.5 x 0.55
12.000 ~
54.000 kHz
8 pF
±15 ppm
±15 ppm
-10 to +70 °C
CX3225GB
Low Profile
Package
3.2 x 2.5 x 0.8
9.800 ~
54.000 kHz
8 pF
±50 ppm
±50 ppm
-10 to +70 °C
CX5032GB
Low Profile
Package
5.0 x 3.2 x 1.0
7.372,8 ~
54.000 kHz
12 pF
±50 ppm
±50 ppm
-10 to +70 °C
CX8045GB
Low Profile
Package for
General
8.0 x 4.5 x 1.8
4.000 ~
48.000 kHz
12 pF
±50 ppm
±50 ppm
-10 to +70 °C
CX1255GB
Ceramic
Package of Low
Frequency
11.8 x 5.5 x 1.8
3.500 ~
28.999 kHz
12 pF
±50 ppm
±50 ppm
-10 to +70 °C
ST3215SB NEW
Miniature
Package
3.2 x 1.5 x 0.8
32.768 kHz
12.5 pF
±20 ppm
±200 ppm
-40 to +85 °C
16
■ Consumer
■ Computers
■ Telecomunications
■ Std. Automotive /
Ceramic Resonators
Resonators
Industrial
Consumer
Standard temp. range: –20 °C ... +80 °C
Advanced temp. range: –40 °C ... +125 °C
Standard temp. range: –20 °C ... +80 °C
■
■
■
■
■
Heatings
Fire alarms
White goods
Lighting
Security
■
■
■
■
■
Digital TVs / Digital radios
Computers
Commercial security systems
USBs
Internet telephones
Technical Data
Series
Dimensions
Frequency Range
Total Frequency Tolerance
Note
PBRC HR (Consumer)
7.4 x 3.4 x 2.0 mm
2 - 20 MHz
13,000 ppm – 4,000 ppm
Fundamental mode
Ceramic case
PBRC MR (Consumer)
4.5 x 2.0 x 1.2 mm
4 - 20 MHz
13,000 ppm – 4,000 ppm
Fundamental mode
Ceramic case
PRQC CR (Consumer)
3.2 x 1.3 x 1.0 mm
8 - 20 MHz
13,000 ppm – 2,700 ppm
Fundamental mode
Epoxy case
17
AVX Circuit Protection
Designers must take careful precautions so that transient surges do not destroy sensitive CMOS circuitry. Typically designers
must harden circuitry from transient surges that range from sub nanosecond ESD pulses to slow speed, higher power transients
such as automotive alternator load dump or power line transients. These threats occur in all electronic systems – automotive,
military, telecom, medical, consumer and industrial sectors. Multilayer Varistors (MLVs) are an effective solution to suppress
transient voltages. MLVs have electrical and physical advantages over traditional means of transient protection – such as zener
diodes. MLVs are available in operating voltages as low as 3.3 volts and energy ratings as high as 50 joules.
Physical Advantages
Electrical Advantages
The primary physical advantage is the small size of AVX MLVs.
MLVs are available in case sizes from 0201 to 3220 discrete
package and also as arrays in dual (0405, 0508) and quad
(0612) package.
Electrical advantages include their EMI filter response, fast
“turn on” time and repetitive strike capability. A single MLV
takes the place of a back-to-back diode, plus an EMC capacitor
thereby saving up to 90% of the board space that zener & capacitor solutions demand. An equivalent circuit model and the S21
filter response of the 0402 products are shown below. In its “off ”
state, the network acts like an EMI filter. In its “on” state the
MLV works like back-to-back zener diodes. MLV capacitance
ranges from 0.47 pF to 9.6 nF.
AVX MLVs are also lead free, fully RoHS compliant and have
standard nickel barrier terminations with 100% matte tin plated
finish.
Discrete MLV Model
MLV Internal Construction
To Device
Requiring
Protection
PCB
Trace
Lp
Rv
Rp
R on
Solder Pad
Where:
18
Rv
=
Rp
C
≥
=
Ron
Ip
=
Voltage Variable resistance
(per VI curve)
1012Ω
defined by voltage rating and
energy level
turn on resistance
=
parallel body inductance
The ceramic material is doped Zinc Oxide
where every grain is a Schottky diode.
The structure between the plates gives series/parallel diodes.
The entire volume dissipates energy.
Market Sectors
Circuit protection in automotive applications
Series
Automotive
Series TransGuard®
High Temp Automotive
Series TransGuard®
Controlled Capacitance
Series TransGuard®
Miniature AC Varistors
Radial Leaded
Series TransGuard®
CapGuard,
High Voltage TVS
VCAS Series
VCAT Series,
CANAT Series
VCAC Series
MAV Series
VR Series
MV Series
Features
■ 0402 to 1210 with
1812 & 2220 planned for future release
■ AEC Q200 qualified
■ Highest energy/
current handling
capability
■ Jump start and load
dump specified
■ Multiple strike
capability
■ Rated at 150°C
■ AEC Q200 qualified
■ ESD rating to 25kV
contact
■ CAN & AG series
available
■ Planned releases
include 0402 to 1210
■ Reduces emissions
from high speed
ASICs
■ Prevents induced E
fields from conducting
into IC
■ Targeted center
frequency and 20db
range
■
■
■
■
■
■ 150°C rated
■ Radial leaded
package 0805 insert
■ Smallest radial leaded
on market
■ EMI/RFI attenuation
■ Discrete, dual and
quad packages
■ Ideal for high transient
applications
■ User defined capacitor and varistor
■ Ultra low ESR/ESL
■ Fast turn on time
■ Multiple strike capability
■ Very high current
handling capability
Applications
■ All automotive
applications
■ Safety
■ Body electronics
■ Drive train
■ Comfort &
convenience
■ Underhood automotive
■ Down hole exploration
■ Multiplex bus
circuits
■ Speaker/
microphone
■ Data over power
■ LCD touchscreen
■ Multiplex bus
circuits
■ High frequency
transmission line
■ Brush motor
■ Multiplex bus
circuits
■ Speaker/
microphone
■ Data over power
■ LCD touchscreen
AEC Q200 qualified
110V Ip to Ip rating
Bi-directional device
Low clamping voltage
Discrete and multielement packages
Circuit Protection in industrial and other applications
Series
TransGuard,
MultiGuard
Glass Encapsulated
Varistor
Sub pF Varistor
UltraGuard
NTC Thermistors –
SMT, leaded
And more..
Features
■ 0201 to 1210 case
size, 1812
& 2220 planned
■ Wide range of ratings
■ Discrete, dual and
quad package
■ Bi-directional
■ Multiple strike
capability
■ 1206 to 3220 case
size
■ Low DC leakage
curren
■ Bi-directional
protection
■ Off state EMI filter,
on state transient
protection
■ Multiple strike
capability
■ Sub 1pf capacitance
to minimize signal
distortion at very high
data rates
■ Low profile 0402
package
■ Low leakage current
■ Multiple strike capability
■ Extremely low
leakage (2μA)
■ Protection for battery
operated devices,
high clock speed IC
and optic circuits
■ Discrete, dual, and
quad packages
■ Negative
temperature
■ Coefficient
■ Precision tolerance
■ available
■ Multiple
temperature
stability options
■ Fast thermal
response time
■ Custom
configuration
Applications
■ Industrial
■ Commercial
■
■
■
■
■ Antennas, Optics,
HDMI, RF circuits,
FlexRay
■ Portable devices and
analog sensors
■ Backlight displays
■ Banked LED drivers
■ Medical
instrumentation
■ Fingerprint ID circuits
■ Camera modules
■ Keyboards
■ All battery operated
devices
■ Automotive
■ Industrial
■ Temperature
sensing
■ HVAC
■ White Goods
■ Mobile phones
■ Battery chargers
■ LED
■ Transfeed
Narrow band, high
attenuation filter with
ESD protection
■ AntennaGuard
Ultra low capacitance
for RF circuit
protection
■ StaticGuard, USB
Low capacitance
parts
■ CAN series
(Automotive)
Low capacitance for
CAN bus protection
■ Low Current Fuses
Accurate and fast
acting fuses 0402 to
1206 size for mobile
phones, PDA, SCSI
Industrial
Telecom
Commercial
Automotive
(MA/PA series)
19
AVX Circuit Protection
PC
Communications
Consumer
Industrial
Healthcare
Energy
USB, RS232, Fingerprint reader,
Cell/Mobile/PDA, base station,
wireless card, key pads
PDA, Set-top, controllers,
White goods, test equipment,
bar code scanner, key pad, GPS,
data input
Industrial controllers, automation
I/O ports, notebook, sound card,
wireless card, wireless scanner,
Hearing aid, instrumentation,
diagnostics, RFID, analysis,
key pads
SMART grid
SMART meter
Nuclear energy
MultiLayer Varistors
TransGuard/MultiGuard
graphics card, keyboard
Automotive TransGuard Series
Car charger
Commercial vehicle electronics
Miniature AC Varistor Series
Controlled Capacitance
Automotive Series
heavy, equipment
Auto inverters, a
inverters
Secondary AC circuitry
Speaker/Mic system, mixed signal,
environments
Speaker/Mic system, mixed signal,
environments
Controller EMC & TVS, control
Hi-Temp Automotive Series
EN60601-1-1-2
Downhole exploration
CAN Series
CAN bus
Axial/Radial Leaded TransGuard
Peak power trac
CAN bus
Communcation ports
White goods
Industrial controllers
Sensor protection
Solar RF/CAN in
DC motor turn o
Solar/Wind inve
AntennaGuard
Notebook, graphics card
Cell/Mobile/PDA, RF amplifiers
RF amplifiers
RF amplifiers
Sub Pf AntennaGuard
USB 3.0 port, graphics card,
ethernet line
Cell/Mobile/PDA, USB 2.0/3.0
HDMI, GPS
3D imaging
UltraGuard
Handheld PDA, backlit display
Cell/Mobile/PDA
Backlit display, PDA,
Battery power device
Sensors, handheld equipment
USB Series
Notebook, LCD monitors, video
card, ethernet lines, universal serial
bus, graphics card
USB Port
LCD TV
Diagnostic equipment
SMART meter
Interface bus
White goods controllers
X-Ray, pace-maker
Solar/Wind inve
tioning, power s
Glass Encapsulated MultiLayer Varistors
Standard Series
Interfaces, keyboard, audio ports
Automotive Series
Industrial controllers, automation,
downhole exploration, geophysical
equipment, heavy equipment
Commercial load dump
Telecom Series
Small power inv
Phone lines, ADSL lines,
telecom circuits
LCT Transient Voltage Suppressor
TransFeed
Finger print ID
multi-media add-on cards
Bar code scanners
Industrial controllers
Instrumentation, monitoring, imaging
Inverters
Lightning/Heavy Surge Protection
CapGuard
Base station
Downhole exploration, geophysical
equipment, heavy equipment
Wind/Solar pane
Negative Temperature Coefficient Thermistors
Leaded/SMT NTC
Battery pack
Cell/Mobile/PDA
LCD compensation, battery pack,
CD player, GPS, coil compensation,
white goods temp. control,
air conditioning/heating
Thermostats, boilers, instrumentation, printers, thermal metering
systems
Temperature measurement
HDD/SSD drives
Cell/Mobile/PDA
Battery pack, LCD screens
Programmable controllers
Patient monitor
Fuses
Thin Film Fuse
20
Solar power
after market
Transportation
Lighting
Security
Military
Automotive
Avionics
GPS Tracking systems fleet
management
GPS input data
LED, OLED, HID, agricultural,
architectural, landscaping,
food processing, stadium, retail,
warehouse, office/commercial
LED modules, key pads, video
camera, motion detector
Communications, aerospace
Comfort & convenience
Data lines
Auto GPS power entry, module, OBD
& general, purpose auto diagnostic
equipment
LED power entry
Vehicles
Safety, body electronics, drive
train, comfort & convenience HEV
modules, monitors & GFI
Automotive transponders
Secondary AC circuitry
Multiplex bus systems
high frequency transmission lines
EMI filtering
Device TVS & controlled EMI filtering
Multiplex bus systems,
data over power filtering,
hands free calling system
Instrumentation TVS & EMI control
Hardened handheld devices
Underhood modules
Engine monitors
CAN bus
CAN bus
Communications,
aerospace vehicles
DC motor turn off surge suppression
Sensors, RF link
Sensors power amplifiers
Keyless entry, high voltage,
DC data lines, firewire bus
Satellite radio, crash avoidance
systems
High speed video bus
GPS, RF circuits, FlexRay
Module TVS & EMI protection
ckers, inverters
Heavy equipment, commercial
vehicle
nterface
CAN bus
off surge suppression
rters nuclear energy
DC motor turn off surge suppression, HEV relay & disconnect,
coil TVS & EMI suppression
rters, power condisupply, smart meters
eters
els
LED drivers
Alarm interfaces
Low power LED drivers
Hardened handheld devices
Diagnostics port
Electronic toll
DC Motor turn off surge suppression
Diagnostics port MP3 charge port
Arcitectural, stadium, street lamps,
agricultural, HID
I/O sensors
Load dump/jump start
Power supply
Cockpit instrumentation, industrial
controllers, automation, downhole
exploration, geophysical equipment
Power supply
Load dump/jump start, water pump,
seat weight sensor, airbag, GPS,
car audio
Power supply
Programmable, agriculture equipment, GPS tracking system
PWM EMI & TVS, protection
Video camera, motion detector
I/O ports
LCD dashboard driver
Communication bus
Inductive dump, radiated noise
attenuation
Arcitectural, stadium, street lamps,
agricultural
Power lines to secure boards
Power supply
Power distribution, fuel pump
Power supply
Temperature control, sensor input
LED module, temperature sensing
LCD monitor, smoke detector
Amplifier temperature sensing
Temp. control sensors, liquid level,
measurement, temp. measurement,
GPS, coil compensation, engine
management, air conditioning,
automatic transmission, TMPS,
Audio compensation
LED
Video camera home security
Power supply
Car electronics
21
Circuit Protection Roadmap
High Density
Power TVs - Max Cap/Energy
Key Applications
■ Advanced cell phone
■ PDA
■ Medical monitors
■ LED lighting
■ Interfaces
Key Applications
■ Inductive loads
■ Avionic power
■ Alternate energy inverters
& controllers
■ Heavy equipment
■ Industrial controllers
Capacitance
■ GPS
■ Notebook
■ Keypad/Keyboard
■ Parallel ports
Max Cap MLV
Future
8-element array
Power MLV
CapGuard
150°C MLV
Future
200C MLV
Automotive
Series
0201 MLV
Energy/Current/Temp
Size
Miniature Low
Current Fuse
0402 SPV
Ultra Low
Leakage
0201 SPV
Capacitance
Future
SPV Array
0805 4-element 0.5pF
Ultra Low Cap
Key Applications
■ High speed ports
■ HDMI
■ USB 3.0
■ Ethernet line
■ Keyless entry
22
■ SMART grid advanced
■ High end AC mains
■ Autom. under hood
modules commercial vehicle
■ Autom. relays/motor drivers
■ Telecom base station
FlexRay
SPV
Low Cap - Low VC/VB
■ RF ports & modules
■ Sensors
■ Optics circuits
■ FlexRay
Key Applications
■ Battery operated devices
■ FETs
■ Sensors
■ PDA
■ HDMI 1.3
■ LED lighting
■ Medical monitors
■ Backlit display
■ GPS
■ RF circuits
RF Products
Type
Brand name
Feature
Range
Accu-P® –
Thin Film
Capacitors
■ Superior lot to lot repeatability
■ High Q, Low ESR
■ No secondary resonances
■ Low temperature coefficient (30 ppm/°C max)
■ Comprehensive test data/ S-parameters available
■ Typical application in range 100 MHz – 20 GHz
■ Tight capacitance tolerances.
■ Low ESR at UHF, VHF, and microwave frequencies.
■ High-stability with respect to time, temperature,
■ 0201 - 1210
■ Cellular telephones
■ 0.05 pF - 68 pF (tol as low as 0.01 pF) ■ Base stations
■ Intermediate cap values available
■ RF PA modules
■ Filters, VCO’s, PA’s,
■ Antenna matching networks,
■ RF modules
■ Satellite communications
■ Wireless LAN
■ Video cameras,
Accu-L® –
Thin Film
Inductors
■ Superior lot to lot repeatability
■ High Q factor
■ High SRF
■ Comprehensive test data / S-parameters available
■ Non-magnetic low dielectric constant insulator
■ Hi power dissipation
■ Repeatable performance at high frequencies
■ 0402 - 0805
■ 0.56 nH - 22 nH
Directional
Coupler – CP
High directivity, tight coupling tolerance; coupler is based
on the proprietary RFAP thin film multilayer technology;
power rating: 3 W continuous; characteristic impedance:
50 Ω available.
Frequency band from
824 MHz - 3600 MHz;
coupling from 7 dB to 27 dB;
directivity 17 dB - 30 dB
Wireless communications
■ Wireless LAN’s
■ Mobile communications
■ WiMAX
■ Satellite TV receivers
■ GPS
■ Vehicle location systems
3dB 90°
Couplers – DB
Miniature 0603 size
■ Low insertion loss
■ High isolation
■ Surface mountable
■ RoHS compliant
■ Supplied on T&R
880 MHz - 3300 MHz;
Insertion loss 0.2 dB - 0.4 dB
Balanced amplifiers and
signal distribution in
wireless communications
Low Pass
Filters – LP
Based on the proprietary RFAP thin film multilayer
technology. The RFAP Harmonic Low Pass Filter is offered
in a variety of frequency bands compatible with various
types of high frequency wireless systems.
Miniature size: 0603 - 0805
■ Frequency range: 900 MHz-5.8 GHz
■ Characteristic impedance: 50 Ω
■ Power rating: 3 W continuous
■ Low profile
■ Rugged construction
SQ, AQ, UQ,
CDR,
Low ESR
■ High Q
■ High self resonance
■ Capacitance range 0.1 pF to 5100 pF
■ 175 ºC Capability SQCB
0.1 pF - 5 nF (50V - 500V)
RF Power Amplifiers
■ Low noise amplifiers
■ Filter networks
■ MRI systems
HQ
Hi-Q®, high RF power, surface mount and leaded MLC
capacitors are characterized with ultra-low ESR and
dissipation factor at high frequencies.
3.3 pF - 6.8 nF (600 V - 7 kV)
Non magnetic version
They are designed to handle high
power and high voltage levels
for applications in RF power
amplifiers, inductive heating,
high magnetic field environments
(MRI coils), medical and industrial
electronics
“U”
Series MK
“U” and MK series capacitors are C0G (NP0) chip capacitors specially designed for “Ultra” low ESR for applications
in the communications market. Max ESR and effective
capacitance are met on each value producing lot to lot
uniformity. Sizes available are EIA chip sizes 0603, 0805,
and 1210.
Size 0402 - 0.2 pF to 22 pF @ 1 MHz
Size 0603 - 1.0 pF to 100 pF @ 1 MHz
Size 0805 - 1.6 pF to 160 pF @ 1 MHz
Size 1210 - 2.4 pF to 1000 pF @ 1 MHz
General RF applications,
low cost solution
GH, GB
Single Layer
Capacitors
■ Dielectrics - NPO thru X7R
■ High Q
■ Construction with border or without border
■ High wirebond strength
■ Single cap or multi cap construction
■ 33 pF - 10 nF
■ Voltage ratings to 200 VDC
■ Decoupling/broadband
GX
■ Ultra broad performance
■ Ultra low insertion loss
■ 0402 and 0201 size
■ Excelent return loss
■ X5R & X7R characteristics
■ 100 nF
■ Voltage ratings 16 VDC
■ DC Blocking 16 kHz - 40 GHz
■ Semiconductor data comm.
■ Transimpedance amplifiers
■ Test equipments
frequency and voltage variation.
Band Pass
Filters – BP
Applications
digital cameras
(tol as low as 0.05 nH)
■ Mobile communications
■ Satellite TV receivers
■ GPS
■ Vehicle location systems
■ Wireless LAN’s
■ Filters
■ Matching networks
Wireless communications
■ Wireless LAN’s
■ Mobile communications
■ WiMAX
■ Satellite TV receivers
■ GPS
■ Vehicle location systems
■ RFID
bypass applications
■ Measuring equipments
23
High Voltage Capacitors – Ceramic „Pucks“, SMDs, Leaded
High Voltage Ceramic „Puck“
High voltage applications require capacitors with high internal resistance, high dielectric strength and low or moderate losses at
working frequencies (from 50Hz up to 10kHz). High voltage ceramic „pucks“ meet these requirements and are suitable for usage for
high voltage applications up to 100kV. Target Applications: High-voltage supply for gas lasers, high-voltage dividers, Marx generators,
power generators, high-voltage power supply, high-voltage coupling devices, lighting arresters ect.
Series
Generally
Dielectric
Rated Voltage
Capacitance
HP - coated
High voltage capacitors with excellent behavior on pulse and fast discharge
conditions, excellent capacitance vs voltage
characteristics, low dissipation factor, very low Corona effect etc.
N4700 (Strontiumbased dielectric)
15kV, 20kV, 30kV,
40kV, 50kV, 60kV,
100kV
280 pF to 5.6 nF
HW - uncoated
High Voltage SMDs
High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high
voltage MLC chip capacitors meet these performance characteristics. Larger physical sizes than normally encountered chips are
used to make high voltage MLC chip products.
Special precautions must be taken in applying these chips in surface mount assemblies. Target Applications: Snubbers in high
frequency power converters, resonators in SMPS, high voltage coupling/decoupling blocking.
Generally
Dielectric
Termination
Sizes
Rated Voltage
Capacitance
This series provides capacitors in different body sizes, extended
capacitor ranges and different rated voltages. These high voltage chips
design exhibit low ESRs at high frequencies.
NP0, X7R
Pd/Ag
Plated Ni and Sn
FLEXITERM®
0805 - 3640
600/630V, 1kV,
1.5kV, 2kV,
2.5kV, 3kV, 4kV,
5kV
10 pF - 560 nF
Range of X7R dielectric capacitors available with AEC-Q200!
High Voltage Leaded
In some applications usage of SMD high voltage capacitors is not the best option. In harsh environments it is sometimes better
to use high voltage leaded capacitors. The leads work as absorbers that prevent capacitors against mechanical and thermal damage.
Target Applications: Snubbers high frequency power converters, resonators in SMPS, high voltage coupling/DC blocking.
Series
Generally
Dielectric
Leads
Test Level
Rated Voltage
Capacitance
SV
AVX special high voltage MLC radial leaded capacitors. The added
advantage of these capacitors lies in special internal design minimizing the electric field stresses within the MLC. SV capacitors are
conformally coated with high insulation resistance, high dielectric
stength epoxy eliminating the possibility of arc flashover.
NP0, X7R
Tin/Lead
RoHS Comliant
Standard
Hi-Rel
600/630V, 1kV,
1.5kV, 2kV,
2.5kV, 3kV, 4kV,
5kV
10 pF - 3.9 μF
24
Film Power Capacitors
Due to diminution of fossil energy and increase of consumption of power, renewable energy is becoming more and
more the power solution for the future.
AVX is already leader on power capacitors used on wind applications, with big DC filters using the well known
“Controlled self -healing technology metallized film” allowing very high reliability, long life time and rms. current capability.
Comparison
Controlled self-healing principle
Type
Film capacitors
Electrolyic capacitors
Surge Voltage
up to 2 times Undc
1.2 Undc max.
Reversal Voltage
Yes
No
Rms. Current
up to 1Arms per μF
0.025 Arms per μF
MTBF
10M hours
1M hours
Life Time
> 100,000 hours
40,000 hours
Storage
> 10 years
1 year max.
Environment
Friendly
No
End of Life
Soft
Explosion
Elementary capacitor
Gate
R
R
Gate
Insulation of elementary weak area
Range Power Capacitors
Style
Type
FFB, FFV3
FFVE, FFVI, FFVS
FFLI
FFLC
FSB
Frequency
up to 160 μF
up to 400 μF
up to 3000 μF
up to 27 mF
100 nF to 3 μF
Voltage
up to 1 350 VDC
up to 1900 VDC
up to 1900 VDC
up to 1900 VDC
850 to 2000 VDC
Current Rms.
up to 33 Arms
up to 110 Arms
up to 100 Arms
up to 600 Arms
up to 28 Arms
Temperature range
up to 105 °C
up to 105 °C
up to 95 °C
up to 85 °C
Stray Inductance
down to 8 nH
Taking in account that leading position, it becomes obvious due to power increase on solar energy to propose also the best reliable
and safe solution for power solar manufacturers. Films in capacitors solve problems with electrolytic designs.
25
SMD Film Capacitors
General purpose function is low to mid voltage application where miniaturization and SMD is required.
Applications
■ Automotive (Airbag, fuel injection calculator, HID headlamp)
■ Telecom (Public switching systems, modems, telephone set, wireless)
■ For Telecom applications we have special “CL” series developed to withstand high line surges (1500V)
common in telecom applications. These capacitors meet the telecom lightning strike protection standards
■ Industrial (AC/DC, DC/DC converter, smoke detector, electronic ballast)
■ Consumer (LCD monitor, display backlight inverter, set top box)
Features
Technical Advantages
■
■
■
■
■
■
■
■
■ Self healing property of film technology results
to safety open failure mode
■ Better overall reliability
■ Excellent thermal shock resistance
■ Low dissipation factor, ESR and ESL
■ No piezoelectric effect
■ Non polar construction
Surface mount sizes from 1206 to 6054
Stacked technology
Available in PET-HT,PEN and PPS dielectric
Up to 630 V and 4.7 μF
High temp applications up to 140°C
AECQ-200 standard
ROHS compliant
Tin / Lead termination option available
Dielectric
PET
PEN
PPS
Operating Temperature
-55 °C to +125 °C
-55 °C to +125 °C
-55 °C to +125 °C
Capacitance range
10 nF to 4.7 μF
1 nF to 4.7 μF
1 nF to 180 nF
Nominal Voltages
63 to 630 VDC
25 VDC to 630 VDC
16 VDC to 50 VDC
Tolerance
±5%, ±10%
±5%, ±10%
±2%, ±5%, ±10%
Size Code
2220, 2824, 4030, 5040, 6054
1206, 1210, 1812, 2220, 2824, 4030,
5040, 6054
1206, 1210, 1812
* Please contact AVX for non-standard size codes
26
Ceramic Capacitors –
AEC-Q200, High CV, X8R/X8L, FLEXITERMTM, FLEXISAFETM
AVX offers a wide range of different SMD capacitors. Those capacitors differ in used dielectric, qualification, inner structure,
termination etc. Choosing the right MLCC for given application is one of the biggest challenges for engineers.
Automotive Electronic Systems
Automotive Electronic Systems
High Temp. Target Applications
■ Harsh environment conditions: wide
temperature range, high humidity
and dust
■ Harsh electrical conditions:
voltage and current spikes,
high electrostatic voltage
■ Increasingly strict requirements:
10 years guarantee, 150,000 miles,
<10ppm failures, lead-free
■ Infotainment & Telematics: hands free
telephony, navigation, storages, radio,
DVD playback ect.
■ Body electronics: power windows &
mirror control, remote keyless entry,
smart junction box ect.
■ Instrument clusters: hardware architecture, HMI components, reusable
components, integration and validation
■ Power train & engine management:
diagnostic tests and interfaces, complex
and simple IO development, model
based software development
■ Automotive engine applications
■ Oil exploration applications
■ Hybrid automotive applications
(battery control, inverter/converter
circuits, motor control applications,
water pump)
■ Hybrid commercial applications
(emergency circuits, sensors)
Type
High CV
High Temperature
AEC-Q200
FLEXITERM™
FLEXISAFE™
Description
Commercial parts,
high capacitance value
(more then 1μF)
Capacitors for
applications up to 150°C
Automotive qualified
Additional epoxy layer in termination
is used – epoxy layer works as a
“shock” absorber preventing internal
cracking resulting from board flexure/temperature cycling damage
Components are manufactured with „cascade
electrode design“ internal
structure
General info
Standard specs and qualifications. Manufactured by
thin tape process. Range
of X7R HiCV capacitors
available in AEC-Q200 and
FLEXITERM™.
Standard specs and qualifications. In addition parts
must pass tests more
strict to temperature
(up to 150°C). High capacitance and stability up to
150°C. AEC-Q200 and
FLEXITERM™ available.
Parts must pass automotive qualification AEC-Q200.
That qualification has
higher criteria than
standard tests.
A solution to thermal & mechanical
board flex (high flexure stress during
depanelisation, board flexure during
manufacture, insertion of PCB in
assembly, variable temperature
applications). FLEXITERM™ provides
improved performance compared
to copper termination. AEC-Q200
qualified.
Probably the safest ceramic capacitor in the world!
FLEXISAFE™ is a capacitor
specifically designed to
eliminate the risk of short
failure circuit. FLEXISAFE™
components are terminated with FLEXITERM™
layer. AEC-Q200 qualified.
Dielectric
X5R, X7R
X8R, X8L
X7R, X8R, X8L, NP0
X7R
X7R
Rated Voltage
6.3 V to 200 V
16 V to 100 V
16 V to 3000 V
16 V to 3000 V
16 V to 100 V
Capacitance
1 μF to 100 μF
270 pF to 1 μF
10 pF to 22 μF
100 pF to 22 μF
1 nF to 470 nF
Figure
27
Ceramic Capacitors –
SMPS (Switch Mode Power Supply)
SMPS series are advanced capacitors offering better electric characteristics than standard parts. Leads effectively decouple the parts
from the board and minimize thermally or mechanically induced stresses encountered during assembly, temperature cycling or
other environmental conditions.
SMPS target Applications
Benefits
Leaded Capacitors
■ Military defense
■ Aerospace programs and satellite
communications
■ Telecom switching, networking,
base stations
■ Power conditioning, DC-DC converter
■ Medical electronics & industrial
equipment
■ Alternate energy, hybrid automotive
■ Down hole – oil exploration equipment
■
■
■
■
AVX offers an extensive range of multilayer ceramic dipped (SkyCap®) and
moulded radials capacitors with specific
series for automotive, high temperature,
military and commercial applications.
To compliment the radial range AVX also
offers a range of conformally coated and
moulded axials. Suitable for spot welding
as well as PCB applications.
■
■
■
■
■
High CV products
Ultra low ESR, ESL
Very high current handling capabilities
Excellent immunity to voltage and
current surges
Non-polar
Excellent high frequency performance
Very wide operating temperature range
High vibration & radiation resistance
High reliability (aerospace)
MH
RH
SM0
TurboCap™
SkyCap®
Generally
Surface mount molded
parts with a multilayer
ceramic insert. Combines
the ceramic attributes of
very low ESR, non polar
contstruction, excellent
high frequency behavior,
excellent voltage stress
capabilities and wide
temperature range; with
the enhanced mechanical
protection of a molded
case.
This range of uncoated MLC
capacitors are processed
for input and output filter
capacitors in high frequency
DC-DC converter applications above 10 W e.g.
telecomms and instrumentation, where high volume
and low cost is required.
Available in surface mount
'J' leaded versions.
The SMPS capacitors are
designed for high current,
high-power and high-temperature applications. These
capacitors have very low
ESR and ESL. SPMS series
capacitors offer design
and component engineers
a proven technology specially designed for programs
requiring high reliability
performance in harsh
environments.
MLC capacitors with very high
capacitance in a small volume.
By vertical stacking of the ceramic
elements, the footprint required for
mounting tha capacitors is greatly
reduced. Ideally suited as filters in
the input and output stages of switch
mode power supplies. With their
ultra-low ESR, these capacitors are
designed to handle ripple current
at high frequencies and high power
levels.
This series has a variety of
sizes and lead spacings to
meet the customer needs.
It has wide capacitance
range and nearly all styles
are available in tape and reel
for automatic insertion.
AR series special for
automotive customers
(AECQ-200 qualified)
Leads
J leads
J leads
Straight, formed in, formed
out, P style, Z style
Straight, formed in, formed out
Straight, formed, custom
lead configuration
Ceramic/
Dielectric
X7R
X7R
C0G, X7R, Z5U
X7R
COG, Z5U, X7R, X8R
Voltage
25 V, 50 V, 100 V
25 V, 50 V, 100 V, 200 V,
500 V
50 V, 100 V, 200 V, 500 V
25 V, 50 V, 100 V
50 V, 100 V, 200 V
Capacitance
1 μF to 22 μF
47 nF to 47 μF
10 nF to 1300 μF
8.2 μF to 220 μF
1 pF to 4.7μF
Series
Figure
28
Ceramic Capacitors –
Low Inductance, Capacitor Arrays, Ultra Thin Capacitors
Low Inductance Capacitors
The ESL (Equivalent Series Inductance) of a capacitor determines the speed of energy transfer to load. The lower the ESL
of a capacitor, the faster the energy can be transfered to a load.
The key physical characteristic determining ESL of a capacitor
is the size of the current loop it creates. The smaller the current
loop, the lower the ESL.
Target applications:
High speed decoupling (ASICs, DSPs, FPGAs, ...),
servers, mainframe computers, graphic boards, etc.
Series
Type
Generally
Termination
No. of
terminals
Dielectric
Rated
Voltage
Capacitance
LICC
Low Inductance
Chip Capacitors
A standard surface mount MLCC is rectangular in shape with
electrical terminations on its shorter sides. LICC has its terminations
on the longer sides if its rectangular shape. When the distance between
terminations is reduced, the size of the current loop is reduced.
Plated Ni and Sn;
5% min lead
1
X7R,
X5R,
X7S,
X6S
4V, 6.3V,
10V, 16V,
25V,
50V
1 nF to
3.3 μF
IDC
InterDigitated
Capacitors
The IDC architecture shrinks the distance between terminations to minimize the current loop size, then further reduces inductance by creating
adjacent opposing current loops.
Plated Ni and Sn;
5% min lead
8
X7R,
X5R,
X7S
4V, 6.3V,
10V,16V,
25V
10 nF to
3.3 μF
LGA
Land Grid Array
Capacitors
LGA technology provides engineers with new options. The LGA internal
structure and manufacturing technology eliminates the historic need for
a device to be physically small to create small current loops to minimize
inductance.
100% Sn
2
X7R,
X5R,
X7S,
X6S
4V, 6.3V,
10V
10 nF to
470 nF
Capacitors Arrays
Capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and to reduce real estate requirements.
Target applications:
Telecommunication, digital set top boxes, computer motherboards, automotive, RF modems, networking products…
Generally
Thickness
Dielectric
Termination
Rated Voltage
Capacitance
Placement costs are greatly reduced by effectively
placing one device instead of four or two. Range of
AEC-Q200 qualified arrays available, including X8R
0405 : 2-element
0508: 2/4-element
0612: 4-element
NP0, X7R, X5R
Plated Ni and Sn; FLEXITERM®; 5%
min lead; FLEXITERM® with 5% min
lead
6.3V, 10V, 16V,
25V, 50V, 100V
1 pF to
470 pF
Ultra Thin Capacitors
The UT series was designed to meet the stringent thickness
requirements of customers. AVX developed a new termination
process (FCT – Fine Copper Termination) that provides unbeatable flatness. The series includes products < 0.35mm in height.
Target applications:
Smart cards, memory modules,
high density SIM cards, mobile phones, MP3 players,
and embedded solutions
Generally
Thickness
Dielectric
Termination
Rated Voltage
Capacitance
The Ultrathin (UT) series of ceramic capacitors is a new product
offering from AVX. This series should meet designers expectations for
embedded applications. Available in size 0402.
0.35 mm, 0.30 mm,
0.25 mm, 0.15 mm
X7S, X7R, X5R
100% Sn, Cu
6.3V, 10V, 16V,
25V, 50V
1 nF to 100 nF
29
Tantalum and Niobium Oxide Capacitors
AVX No.1 Manufacturer
AVX is a universal supplier of leading tantalum technology from miniature to large capacitors in a wide range of applications from
consumer through industrial and automotive up to the high end products such as medical and aerospace grades. Strong market
presence in all regions over the world offer leading support and services.
AVX tantalum product series
Each product series is designed to meet specific application requirements such as electrical parameters,
case size and environmental conditions.
OxiCap® NBO
Tantalum
Automotive
Industrial
TRJ
TAW
THJ
Professional
Fused
Hi-Temp175ºC
Ultra Low
ESR
TRM
TPM
TCM
NOM
Professional
Multianode
Multianode
Multianode
Low ESR
TPS
TCJ
Polymer
Low ESR
Standard
Commercial
Low Profile
Consumer
High CV
30
TCN
Undertab
NOJ
TAJ
TAJ
Low Profile
TACMicrochip®
Low Proflie
NOS
NOJ
TLN
TLJ
TLC
NLJ
Undertab
High CV
TACMicrochip®
High-CV
Automotive
Type
High performance tantalum
Oxicap
AVX series
TRJ professional
TRM Professional ultra low
ESR
THJ high temperature
NOJ
Applications
references
Tire pressure monitoring,
brake and steering control,
engine control unit
Display systems, airconditioning, wiper control,
powersteering
HID headlamps, ABS power
supply, brake and steering
control, engine control unit,
airconditioning
Vehicle tracking system, car alarm, steering angle
sensor, airbag system, car audio systems
Capacitance
0.1 – 470 μF
22 – 1500 μF
0.1 – 220 μF
4.7 – 1000 μF
10 -1000 μF
ESR values
Low ESR parts available
Super low ESR
Low ESR options on approval
-
Wide range of ESR options
Tolerance
10% / 20%
Rated voltage
4 – 50 VDC for continuous
operation at + 85 °C
Operating
temperature
-55 to 125 °C (with voltage derating)
Reliability
0.5% per 1000 hours at 85C, Vr with 0.1Ω/Vr series impedance
Benefits
■ Moisture penetration barrier
■ Thicker dielectric layer & improved manufacturing processes
■ Robust against higher thermo-mechanical stresses
NOS low ESR
20%
2.5 – 35 VDC for continuous
operation at + 85 °C
6.3 - 50 VDC for continuous
operation at + 85 °C
1.8 – 10 VDC for continuous
operation at + 85 °C
1.8 – 6.3V for continuous
operation at + 85 °C
-55 to 175 °C
(175°C at 0.5Vr continuous
-55 to 105 °C
(with voltage derating)
-55 to 125 °C
(with voltage derating)
0.2% per 1000 hours at
85 °C, Vr with 0.1 Ω/Vr
series impedance
■ Non-burn safe technology
■ Lower recommended derating
■ More resistive to overvoltage breakdown
■ High resistance failure mode
accelerated ageing process, very strict quality control limits
■ Reduced DCL limit by 25%
■ Gold and SnPb plating
upon request
“Mirror” construction used
with D case reduces ESL
to half Reduced DCL limit
by 25%
Gold plating available on
request
Low profile available
Power Supplies
Type
Standard
Low ESR
Performance
Low ESR performance
AVX series
TAJ
TPS
TCJ
TPM, TCM
NOJ
NOS
TRM
Applications
references
USB datacards
LED headlamp,
backlight of portable devices
Power lines DC/
DC converters,
LDO regulators,
switching hubs
Digital cameras,
routers, switching
hubs, supplying circuits
in LCD TV
Wireless data
transfer, telecommunications,
Power lines
Smoothing output
of branches for
peripheries in
notebooks,
wireless sensor
network
Output filtering in
wireless sens or
network, high end
audio devices
Industrial computers, telecom
applications, base stations,
high end commercial app.
Capacitance
0.1 – 2200 μF
0.1 – 220 μF
4.7 – 1000 μF
ESR values
-
Low ESR values
Very low ESR options
Lowest ESR
options
-
Wide range of low
ESR options
20%
10%, 20%
20%
Tolerance
10%, 20%
Rated voltage
2.5 – 50 V for continuous operation at + 85 °C
Operating
temperature
[°C]
-55 to 125 (with voltage derating)
Reliability
1% per 1000 hours at 85 °C, Vr with 0.1 Ω/Vr series impedance
Benefits
■ Low profile
available
■ Wide range of
voltage/
capacitance
■ Wide range of
case size and
ESR options
-55 to 105
(with derating)
■ Lower derating
■ Voltage range up
to 125 V
■ TCN series with
improved CV
1.8 – 10 VDC for
continuous operation at + 85 °C
-55 to 125 (with
-55 to 105
voltage derating)
(with derating)
for TPM and -55 to
105 for TCM
0.5% per 1000
hours at 85 °C,
Vr with 0.1 Ω/Vr
series impedance
■ Can withstand
higher ripple
current and
surge currents
Ultra low ESR
10%, 20%
1.8 – 6.3 V for
continuous operation at + 85 °C
2.5 – 35 V for continuous
operation at + 85 °C
-55 to 125 (with voltage derating)
0.2% per 1000
hours at 85 °C,
Vr with 0.1 Ω/Vr
series impedance
■ Non-burn safe technology
■ Lower recommended derating
■ More resistive to overvoltage
breakdown
■ High resistance failure mode
0.5% per 1000 hours at
85 °C, Vr with 0.1 Ω/Vr series
impedance
■ Thicker dielectric
■ Accelerated ageing
■ Reduced DCL by 25%
■ High ripple and surge
current capability
31
Tantalum Capacitors for Medical
Medical
Type
Life support
Non life support
Medical grade HR5000
Hi-reliability / long life
AVX series
TMC Microchip medical
TAC Microchip
TRJ / TRM
Oxicap
TAJ
Standard tantalum
Applications
e.g. implantable devices such
as pacemakers, defibrillators
Hearing aids, miniature
devices
External defibrillator battery
support, wireless transmitting.
Memory power,
Power supplies
USB docks
Battery support
Decoupling
Sensor units
Audio coupling
Battery support of handheld
devices
LED backlight
Capacitance
0.10 – 68 μF
1 – 220 μF
0.1 – 1500 μF
4.7 – 1000 μF
0.1 – 2200 μF
ESR values
–
Low ESR options
Low and ultra low ESR
options
Low ESR option
Low ESR options
Tolerance
10%, 20%
20%
10%, 20%
Rated voltage
3 – 20 V for continuous
operation at + 85°C
2.5 – 50 VDC for continuous
operation at + 85 °C
1.8 – 10 VDC for continuous
operation at + 85 °C
2.5 – 50 V for continuous
operation at + 85 °C
Operating temp.
[°C]
-55 to 125 (with voltage derating)
Reliability
HRC5000, Weibull B grade,
0.1% per 1000 hours
1% per 1000 hours at
85 °C, Vr with 0.1 Ω/Vr
series impedance
0.5% per 1000 hours at
85 °C, Vr with 0.1 Ω/Vr
series impedance
0.2 - 0.5% per 1000 hours
at 85 °C, Vr with 0.1 Ω/Vr
series impedance
1% per 1000 hours at
85 °C, Vr with 0.1 Ω/Vr
series impedance
Benefits
■ Established reliability
■ Very low leakage current
■ Very high volumetric
■ Low profile options
■ Thicker dielectric layer &
■ Non-burn safe
available
■ Very high volumetric
efficiency
improved manufacturing
processes
■ Robust against higher
thermo-mechanical
stresses
■ Accelerated ageing
process,
■ Very strict quality
control limits
■ Reduced DCL
limit by 25%
technology
■ Lower recommended
derating
■ More resistive to
overvoltage breakdown
■ High resistance
failure mode
■ Low profile available
■ Wide range of voltage/
efficiency
2 – 25 VDC for continuous
operation at + 85 °C
Nickel and Gold plating option
available upon request
capacitance
Special requirements
Example of applications
■
■
■
■
■
■ Implantable pulse generators
(pacemakers, defibrillators, CHF therapy)
■ Brain and nerve stimulators
■ Insulin pumps
■ Blood pressure analyzer
■ Glucose meter
■ X-ray detector
■ Handheld electrocardiogram
Very small case size
Low leakage capability
Minimize space requirements
Established reliability
Traceability, inspection and realibility management
32
Electronics worldwide
CONSULT worldwide
COMPONENTS worldwide
LOGISTICS worldwide
SUPPORT worldwide
Technical Consulting
Semiconductors
Supply Chain Solutions
Online Services
Commercial Consulting
Passive Components
Logistic Modules
Logistical Consulting
Electromechanical
Components
Logistic Fulfilment
Seminars, Workshops
and TechDays
Displays & Boards
Storage Technologies
Value Added Services
Procurement
Product Change Notifications
Quality Management
Consulting
Wireless Technologies
Lighting Solutions
Photovoltaic Solutions
33
Log in and find out
Advantages for
Developers
Online Catalogue
Search and filter by up to 30 technical parameters
Product Change Notifications
Search in plain text and by item number
Procurement
Massquotation
Data sheets, product links, application notes
Suggestion of alternative items, e. g. where components
are no longer available
Comparison facility with listing of deviating parameters
Dear customer,
We have developed an online platform
specifi cally tailored to your needs.
Webg@te allows you complete access to
more than 1,000,000 items, and gives you
comprehensive information about delivery
times, product parameters, customs duties,
part numbers and data sheets. On top of all
PCN (product change notifications) can be viewed for
the relevant product
Support from and direct contact with the Rutronik
product specialist
Online sample ordering
this, we offer you superlative technical
Market price listing
support – you ask us a question and our
Download and print mailing of Rutronik brochures
technical adviser contacts you quickly with
the answer.
Check out the virtually limitless
possibilities for yourself and register at
www.rutronik.com / webgate.
34
Component recommendations by Rutronik Product
Consultant
Advantages for
Buyers
Request for quotation or direct order on the delivery and payment terms agreed with Rutronik (free postage and packing
within Europe for orders of EUR 100 or more)
Direct connection to your contact at Rutronik – worldwide
Availability calculation with requested date and quantity
PROCUREMENT
Total orders on hand can be viewed at webg@te
Agree new delivery dates online
Realistic price listing
Information about contracts, safety stock,
classifications, consignment warehouse, traceability
Listing of offer prices
Online tracking
Sale lists available to download as Excel files
Download all lists as Excel files. This allows orders
on hand and dates to be loaded to the company’s own
ERP system, eliminating the need to process the order
acknowledgement
PCN (product change notifications) can be viewed for the relevant product
Complete product program from all major suppliers
All key article and scheduling parameters
MASSQUOTATION
Download and print mailing of Rutronik brochures
Upload the component requirement as an Excel file
Automatic analysis of lists in webg@te and assignment of
the products from the Rutronik range
Transfer the results to the shopping basket or download
the results as an Excel file, including price and scheduling
information
Your advantages
Results in real time
24-hour service
Direct ordering facility
Direct enquiry facility
Download the results list for further processing
35
Germany – Headquarters
Rutronik Elektronische Bauelemente GmbH | Industriestraße 2 | 75228 Ispringen / Pforzheim
Tel. +49 (0) 7231 801-0 | Fax +49 (0) 7231 82282 | E-Mail: [email protected] | www.rutronik.com
Berlin
Justus-von-Liebig-Straße 7
12489 Berlin
Tel. +49 30 8 09 27 16-0
Fax +49 30 8 09 27 16-16
Erfurt
Flughafenstraße 4
99092 Erfurt
Tel. +49 361 2 28 36-30
Fax +49 361 2 28 36-31
Hamburg
Neue Gröningerstraße 10
20457 Hamburg
Tel. +49 40 3 59 60 06-20
Fax +49 40 3 59 60 06-50
Nürnberg
Südwestpark 10/12
90449 Nürnberg
Tel. +49 911 6 88 68-0
Fax +49 911 6 88 68-90
Dortmund
Zum Lonnenhohl 40
44319 Dortmund
Tel. +49 231 9 50 36-0
Fax +49 231 9 50 36-31
Frankfurt
Frankfurter Straße 151 c
63303 Dreieich
Tel. +49 6103 2 70 03-0
Fax +49 6103 2 70 03-20
Mannheim
Amselstraße 33
68307 Mannheim
Tel. +49 621 76 21 26-0
Fax +49 621 76 21 26-17
Ostwestfalen
Brockweg 133
33332 Gütersloh
Tel. +49 5241 2 32 71-0
Fax +49 5241 2 32 71-29
Dresden
Radeburger Straße 172
01109 Dresden
Tel. +49 351 20 53 30-0
Fax +49 351 20 53 30-10
Freiburg
Basler Landstraße 8
79111 Freiburg
Tel. +49 761 61 16 77-0
Fax +49 761 61 16 77-11
München
Landsberger Straße 478
81241 München
Tel. +49 89 88 99 91-0
Fax +49 89 88 99 91-19
Ratingen
Gothaer Straße 2
40880 Ratingen
Tel. +49 2102 99 00-0
Fax +49 2102 99 00-19
France
Rutronik S.A.S
6, Mail de l’Europe
78170 La Celle St Cloud
Tel. +33 1 30 08 33 00
[email protected]
Padua
Via Savelli, 62
35129 Padova (PD)
Tel. +39 049 8 69 78 00
Portugal
Rutronik Elektronische
Bauelemente GmbH
Av. General Humberto Delgado
Porta 8, 1ºAndar, Sala R
4760-012 V. N. Famalicão, Portugal
Tel. +351 252 3 12-336
Madrid
Ctra. Canillas 134 - 1a Planta - 9B
28043 Madrid
Tel. +34 91 3 00 55 28
Romania
Rutronik Elektronische
Bauelemente GmbH
Grigore T. Popa Strasse nr. 81,
etage 8
300291 Timişoara
Tel. +40 25 64 01 240
Sweden
Rutronik Nordic AB
Kista Science Tower
Färögatan 33, 16451 Kista
Tel. +46 8 50 55 49 00
Photovoltaic & Lighting Solutions
RUSOL GmbH & Co. KG
Am Bahnhof 5-7
97990 Weikersheim
Tel. +49 7934 99 40-0
Fax +49 7934 99 40-99
[email protected]
Austria
Rutronik Elektronische
Bauelemente Ges. m. b. H.
Durisolstraße 1
4600 Wels
Tel. +43 7242 4 49 01
Belgium
Rutronik Elektronische
Bauelemente GmbH
Keppekouter 1
Ninovesteenweg 198
9320 Erembodegem-Aalst
Tel. +32 53 60 65 90
Bulgaria
Rutronik Elektronische
Bauelemente GmbH
Zheko Voyvoda street no. 5
1756 Sofia
Tel. +359 2 9 74 86-46
Czech Republic
Rutronik Elektronische
Bauelemente CZ s.r.o.
Brno
Slavičkova 1a
63800 Brno
Tel. +420 5 4 54 24-681
Prague
Papírenská 1
160 00 Praha
Tel. +420 2 33 34 31 20
Denmark
Rutronik Elektronische
Bauelemente GmbH
Herstedøstervej 27-29
2620 Albertslund
Tel. +45 7020 19 63
Estonia
Rutronik Elektronische
Bauelemente GmbH
Vaksali 17A
50410 Tartu
Tel. +372 6 60 93 60
Finland
Rutronik Elektronische
Bauelemente GmbH
Kirkonkyläntie 3
00700 Helsinki
Tel. +358 9 32 91 22 00
Bordeaux
Tel. +33 5 57 26 40 00
Grenoble
Tel. +33 4 76 61 00 90
Le Mans
Tel. +33 2 43 78 16 97
Lyon
Tel. +33 4 72 76 80 00
Poitiers
Tel. +33 5 49 52 88 88
Rennes
Tel. +33 2 23 45 14 40
Strasbourg
Tel. +33 3 88 78 12 12
Hungary
Rutronik Magyarország Kft.
Fehérvári út 89-95
1119 Budapest
Tel. +36 1 371 06 66
Italy
Rutronik Italia S.r.l.
21, Via Caldera
Centro Direzionale S.Siro
20153 Milano (MI)
Tel. +39 02 4 09 51-1
[email protected]
Ancona
Via 1° Maggio, 150/B
60131 Ancona (AN)
Tel. +39 071 2 91 62 18
Rome
Via Del Maggiolino, 125
00155 Roma (RO)
Tel. +39 06 228 782-1
Turin
Strada Torino, 43/45
Europalace
10043 Orbassano (TO)
Tel. +39 011 9 02 20 00
Lithuania
Rutronik Elektronische
Bauelemente GmbH
Raudondvario pl.76
47182 Kaunas
Tel. +370 37 26 17 80
Mexico
Rutronik Mexico S.A. DE C.V.
Ecuador Nº 4
Lomas de Queretaro
76190 Queretaro
Tel. +52 442 242 5361
Norway
Rutronik Elektronische
Bauelemente GmbH
Olav Helsets vei 6, 0694 Oslo
Tel. +47 22 76 79 20
Netherlands
Rutronik Elektronische
Bauelemente GmbH
Papland 4a
4206 CL Gorinchem
Tel. +31 183 64 60-50
Bologna
Via Gazzani, 8/2 - Z.I. Bargellino
40012 Calderara di Reno (BO)
Tel. +39 051 6 46 32 00
Poland
Rutronik Polska Sp. z o.o.
ul. Bojkowska 37
44-101 Gliwice
Tel. +48 32 4 61 20 00
Florence
Via V. Emanuele, 33
50041 Calenzano (FI)
Tel. +39 055 8 82 73 32
Gdynia
ul. Batorego 28-32
81-366 Gdynia
Tel. +48 58 7 83 20-20
Naples
Via Arcora, 110, Palazzo Gecos
80013 Casalnuovo di Napoli (NA)
Tel. +39 081 5 22 87 09
Warsaw
ul. Patriotów 110
04-844 Warszawa
Tel. +48 22 3 32 73-70
Bucureşti
Tel. +40 314 25 38 39
Russia
Rutronik
Beteiligungsgesellschaft mbH
Leningradskoje Chaussee 16
Building 3, Office 403
125171 Moscow
Tel. +7 495 7 86 28 02
San Sebastián
Po Ubarburu, 71 - 1oE
20115 Astigarraga
Tel. +34 943 40 45 28
Switzerland
Rutronik Elektronische
Bauelemente AG
Volketswil
Hölzliwisenstr. 5, 8604 Volketswil
Tel. +41 44 9 47 37 37
Yverdon-les-Bains
Rue Galilée 15,
1400 Yverdon-les-Bains
Tel. +41 24 4 23 91 40
Turkey
Partner of Rutronik group:
Elektro Elektronik San. Tic. A.S.
Burhaniye Mah. Bahceler
Sokak No:10
Beylerbeyi 34676 Uskudar/Istanbul
Tel. +90 216 557 67 00
Serbia
Rutronik Elektronische
Bauelemente GmbH
YUBC Bul. Mihajla Pupina 10z/IV
11070 Beograd
United Kingdom & Ireland
Tel. +381 11 311 33 66-3
Rutronik UK Ltd.
Deakins Business Park,
Blackburn Road, Egerton
Slovakia
BL7 9RP Bolton, Lancashire
Rutronik Elektronische
Tel. +44 1204 60 22 00
Bauelemente GmbH, o.z.
Lazovná 11
97401 Banská Bystrica
Tel. +421 48 4 72 23-00
Slovenia
Rutronik Elektronische
Bauelemente GmbH
Motnica 5, 1236 Trzin
Tel. +386 1 5 61 09 80
Spain
Rutronik España S.L.
Barcelona
C/ Marqués de Sentmenat 54 - 58,
3a Planta - 1o, 08029 Barcelona
Tel. +34 93 4 44 24 12
L10 | INT | AKN | Specifications subject to change without notice. Please note that there are limitations for AVX product lines in some European countries. Please contact our sales team.
International branches: