As New Product Catalog - As New Printing Machinery Company

Transcription

Product Catalog
Monday, 22 December 2014
Commitment to Quality
As New Printing is committed to bringing you products
of the highest quality. From aligning your printing
equipment with your business needs to an end-to-end
strategy for printing requirements, As New has the
experience and expertise that you need.
Head Office:
31D CROMBIE Avenue Bundall 4217,
Australia
Email:
[email protected]
Phone:
+61 7 5574 3342
Website:
www.asnewprint.com.au
Fax:
+61 7 5677 0662
1 Colour Presses
Machine ID
Model
Details
28954
Rotaprint Delta 38NP
Conventional Dampening, numbering & Perf. More suitable to
large sheets (GTO 52) & longer runs. NCR ran well. Working
condition . Available now.
28948
Ryobi 3300 MR
1 colour, with swing away numbering, standard machine,
working condition , available now.
28899
Heidelberg GTO 52NP
bareback dampening, with numbering and perfing.Approx,
62,700,000 Imp, standard accessories.Working condition.
Available now
28764
Ryobi 560
It has 18 Mil Imp Molleton dampening,Comes with basic tools,
parts and operators manual and electrical diagram. Working
condition.on our floor Available now
28644
Heidelberg GTO 46
450mm x 320mm.conventional dampening, Working condition.
Available now
28625
Itek 975
molleton dampening standard accessories plus itek 612
silvermaster platemaker.
28605
Heidelberg GTO 46NP
Standard machine , Approx. 49 mil imp,conventional
dampening,standard accessories includes 2 numbering boxes, 1
perf arm 2 numbering rings..cleaned and checked.ON OUR
FLOOR Available Now
28427
Heidelberg SM 52 1
Standard machine, ONLY 5 mil imp, alcohol
dampening,refrigeration. Available NOW
28293
Heidelberg Kors
520 X720MM with a UV attachment.Can Print solid and spot UV
varnish.Good condition.Available Now
28015
Ryobi 500NNP
Molleton Dampening, 4 numbering boxes, 240 volts.Has
inverter. Working condition. Available now
27674
HeIDELBERG SM 52 1
Approximately 47 million impressions, standard machine plus
version with numbering,has 2 convex and 2 concave boxes and
2 perfing arms working condition. Available Now.
Page 2 of 63
CAN'T FIND WHAT YOU ARE LOOKING FOR ?
We have many machines that are not listed, the details of which are subject to application. In the event you are unable to find
a suitable machine on our stocklist, send us your specific requirements and our Sales team will do their best to assist.
27663
Heidelberg QM 46
standard machine, Approx.9 Mil Imp,Good condition, New
delivery chains, recent roller change, tools accessories includes
plate punch and all books. Available Now
27406
Heidelberg GTO 46NP
1 x Numbering unit, 1 x Perforating arm, 1 x cam , 1 x
numbering ring, 1 x No. box . All safety guards are on &
complete. Approx, 64 Mil Impressions ,CONVENTIONAL
dampening, Owners manual .working condition. Available NOW
24741
Roland Pratika 00
Numbering and Perf; Varn Dampening; 360 x 520mm ; no
damage to cylinders and gears; standard tools and accessories
(include grease gun, spanners, mounting blocks if printer wants
to use 2nd colour- the mounting blocksmount onto the
numbering shaft to form an extra cylinder , a colour on the
numbering unit and add that to the job, can be used for coating
or overprinting ) ; working condition.ON OUR FLOOR code 1
Page 3 of 63
2 Colour Presses
Machine ID
Model
Details
28897
Heidelberg GTO 52ZNP
conventional bare backs,straight machine, comes with
numbering and perforating.Approx Impressions 77,500,000.
standard accessories.Working condition. Available Now.
28864
Itek 3985
varn dampening,working condition. Available Now
28837
Ryobi 512 H
Imp count 3769752 (x10 ), alcohol dampening, comes with
manuals and spare blankets. Working condition , video link
available available now.
28789
Heideberg GTO52Z NP
very good machine with standard accessories, 57mil
impressions, DDS dampening, numbering and perforating still in
production
28751
Heideberg GTO 52
colour conventional dampening ,with numbering unit .Imp
number 48409662. Working Condition .Available now.
28746
Fuji 52IIP
Conventional Dampening , Numbering and Perf unit,Is in
operation . Working condition. Available now
28684
Ryobi 512NP
Standard dampening,with numbering , cross perf mechanism ,2
perf arms, 2 no boxes Max sheet 520 x 365 mm.Approx. Imp
6,785,909.No damage ,well looked after press , 1 operator ,runs
day shift only various spares & parts as well.Good condition
28648
Heideberg GTO 52 2
With Number and Perf , 51 million IMP , still prints well. Comes
with standard tools ,accessories and manuals Working
condition. Available Now.
28643
Roland R202 TOB
SERIES 245 ONLY 490,000 IMP ,ROLANDMATICS
dampening,Used as a training press, can print newspaper
posters, 520mm x 740mm approx , working condition, Available
now.
Page 4 of 63
28629
Miyakoshi MSP 15 B 007
2 colour forms printing press with 2 colour second tower, Max
web width 430 mmcapable of letter press printing roll unwinder
with roll or sheet rewinding, web insertion unit and waste trim &
17 cassettes. Designed to accept letterpress cassette. Cylinder
sizes: 11”, 11 2/3”, 12”, 14 2/3”, 17” Sprocket Holes Left &
Right,Reel to Reel, Reel to Pack, or Sheeted,Turn BarReel to fan
fold . It has a tinter ( So you can buy much cheaper white NCR
and tint on the fly) .It is a perfector (so you can run 1/1)
mechanical numbering – number inline. It comes with a 12”
(inch) cylinder. Not many forms presses come with this size max
would be A4 size. (So if the artwork is full A4 you can allow
bleed & trim on the fly) (Print 1 col front/ 1 Col Back) Or 2
colours on front.+ Tinter AVAILABLE NOW.
28624
Ryobi M 3302
standard dampening , working condition.
28493
Heidelberg SM 52 2 NP
Numbering and Perf; cocking; Approx. 70 Mil Imp IMP SAPC;
chrome cylinder; has laser cut ink ducts ; alcohol dampening;
autoplate; blanket wash; no damage or repairs to cylinders;
rollers are OK; Working Condition. ON OUR FLOOR
28331
Roland R202TOB
Rolandmatics, 3 gripper system, weko spray,quick action plate
clamps,53 Mil Imp.Working condition.Max Sheet Size:520 x
740mm Series 246. Can RUN 4 COLOUR WORK. Can do up to
600 G/M Availabe Now.Code 1B ON OUR FLOOR.
28252
Sakurai Oliver 52 2E
36 x 52cm 2 colour, Aprox. 56 mil imp (including numbering
unit) Bareback dampening,plus parts & operation books.NO
NUMBERING BOXES, 2 CAMS, 2 NUMBERING RINGS, 3 PERF
ARMS..Machine recently serviced and in excellent condition.
28194
Heidelberg SM 52 PNP
CP tronic. Streamfed, Number and Perforating, 2 numbering
cams and 2 perf arms, alcohol dampening, perfecting.Auto
blanket and back cylinder washes,Approx 70 mill. Imps. Spent $
15,000 on repairs and maintenance in September.,
2014.Available Now
28163
Shinohara 52 2P
alcohol dampening, brand new rollers- 3 months old, drive chain
replaced, serviced regularly.Auto positioning for plate but
manual plate loading. Numbering and perforating, cross perf.
Standard accessories.Stream feed.One operator only. On our
floor. Available Now
27878
Fuji 52 2 PNP
Both heads have Kompac dampeners in excellent condition,2
maybe 3 numbering boxes,All numbering, perfing and stereo
attachments,In line perfing arms and wheels.approx 45 million
impressions, Silver master plate maker. Available Now
27710
Heidelberg GTO 52 2 ZPNP
Conventional dampening, working condition,standard
accessories.ON OUR FLOOR Available Now
Page 5 of 63
Conventional dampening, working condition,standard
accessories.ON OUR FLOOR Available Now
27665
Komori L 226
Lithrone Approx. 42 million doing 2 COLOUR,Alcohol dampening
,Duct keys are manual ,Main motor rewound Presentations
Folders, General jobbing Is in good order Main motor rewound 8
years ago Manual Duct keys. Impression 1st unit .Available now.
Working condition
26807
Ryobi 512
conventional dampening, tools, manuals working condition
26717
Ryobi 522 GX
Ryobimatic continious dampening the total amount of
REVOLUTIONS is: 24,203,870 Powder sprayer Grafix Semi
RPC (semi auto plate loader) automatic Ink roller washing
device Blanket washing device - automatic Cooling and
recirculation technotrans Suction tape feeder table. Low pile.
Complete and in working condition.
26652
Koenig & Bauer Rapida 72
Max sheet size 720 x 510 minimum Sra3 Runs up to 14000
sheets per hour.Approx. 93 MIL IMP Good condition Superb
print quality and registration. High pile model ,Mabeg feeder
Well maintained . Max thickness: 600 micron Lots of spare roller
shafts and few spare rollers .In Production Available now
26224
Shinohara Fuji 52 NP
Max sheet 520 x 360 Min sheet 105 x 148 Standard molleton
dampening No damage Swing away numbering.
22550
Ryobi 3302 H
40 million impressions, 340 x 450 mm 90 x 130mm, standard
machine, single phase,complete and with all standard
accessories, all tools and service manuals,Single Phase.No
operators manuals. It has dampening solution device. This
continuous dampening original system came with the
machine.10,000 sph Will handle 60gms easily. 3 trolleys, 2 feed
boards. working condition. Machine has been cleaned. Machine
can do envelope work very easily. M model not high
pile.Portrait Machine. Available Now
Page 6 of 63
4 Colour Presses
Machine ID
Model
Details
28986
Komori LS 440 LX
Installed in January 2008, Approx.37,000 Chamber coater Type
IV with extended delivery 2.20 metres, tresu doctor blade
system, varnish circulation pump, anilox roller x 1,SAPC, Paper
thickness and size preset,CIP 4 KMSIV WITH PC,KHS,Tec
hnotrans chilling unit,auto ink,roller washers,remote plate
register and plate cocking, chrome cylinders,non stop
feeder.Supplier has upgraded to a 6 colour inter deck UV
press.Available Now
28978
KBA SRO 4H
Approx. 124 million impressions,max sheet: 740 x 520
mm,Alcohol dampening- recirculating ,Colourtronic control
desk,28” high pile delivery,In production ,No damage,Full set of
spare rollers and some parts ,Parts book and electrical manual.
28938
Shinohara 52 4P Perfector
52.1 mil imp . New rollers replaced progressively over the last
18 months.DPX plate system , with 3 rolls of plate material ,
activator and stablilser. Working condition. Available now.
28903
Komori Lithrone 440 LS
Installed 2012 , manufacture 2010 Imp. Approx.38 mio.
Approx.Specification :Komorimatic dampening System PQC APC
(Autoplate) KMS Preset Refrigeration and Circulation dampening
Autowash Chromed Impression cyl. Suction feed board Powder
spray Still in production and can be inspected Machine still
running in production, No damage or repairs on cylinders.
Machines overall condition is good. Available immediately
28902
Man Roland RVFOB FAVORIT 4 Colour,has conventional dampening system, powder spray
unit, stream feeder. It was printing four colour labels, both spot
and screens. All rollers and dampeners etc are with machine,
was used for mainly small run label work.Approx. 63,031,633
Mil imp. It has Mabeg Feeder. Machine was running all four
decks at same time printing four colour labels, both spot and
screens with success.Working condition , available now.
28898
Heidelberg GTO 52 4NP
DDS DAMPENING,with numbering and perforating. Impressions
Approx.27,500,000. Standard accessories.Working condition.
Available now.
Page 7 of 63
28853
Shinohara 52 4
Perfecting machine with semi auto plate, Approx.35 Mil
imp,elecronic register adjustment , ink control alcohol
dampening, Baldwin chiller unit, laser ducts in good condition
,CIP 3,Well maintained. Working condition
28719
Komori NL 428 EH LX C
Four Colours + Coating Unit with Anilox "Chambered Doctor
Blade + Extended Delivery ,Approx 65 Mil imp, PQC Komori
(Print Quality Control) ,PDC-S (Print Density Control
Spectrophotometer) Press connected to CIP3 (owner will keep
the software installed in his CTP) ,KMS IV (Komori Monitoring
System) ,S-APC (Semi Automatic plate mounting) ,Cocking
Register via PQC,All Automatic Washing Devices : Blankets,
Impressions Cylinders & Ink rollers,KOMORIMATIC Dampening
,Technotrans Refrigeration system Stream Feeder ,Side lay &
Double Sheet Detector,Chromed Impression Cylinders,Extended
Delivery ,Sheet Decurler ,Steel Plate in Feeder and Delivery
IR Dryer - Baldwin ,Powder Spray unit,Coating Unit with Anilox
"Chambered Doctor Blade" ,Machine with standard air
pumps,Compressor not included (as it is on central air system)
Including : Tools, manuals and accessories ,Optional : Plate
Punch and Bender.Had been refurbished by Komori in 2009.
Available January 2015.
27978
Gallus R160B 03
4 colour rotary letterpress 1 x rotary screen coater 4 x UV
dryers rotary die cutter , web guide alignment, 8 x 84T cylinders
and 8 x 96T cylinders , 1 sprocket punch, 4 die cutting
cylinders and 1 spare ink unit all manuals and toolswaste
extract, Corona Treater unit. Available Now
26831
Roland 304
Rolandmatics,Approx. 145 Mil Imp, Max sheet size: 530 x 740
mm; CPL Auto plate, Rolandmatic Dampening, RCI remote
inking, Technotrans, air compressor and sound box for
compressors and a work station; NO IR. 2/2 Perfecting
machine but has been used as a straight machine for a number
of years.working condition.Maximum board thickness for the
305 is 0.6mm. Available due to Company merger. Available
Now. video link :http://youtu.be/o-FzLWs43Z8
Page 8 of 63
5 Colour Presses
Machine ID
Model
Details
28957
Heidelberg CD 102 5
Size 72 x 102 cm, Ca. 85 mio impressions , Equipment : CP2000
, Autoplate , Alcolor , Preset Plus feeder , Preset Plus delivery ,
Normal delivery XO , Feeder pile support plate with ramp ,
Delivery pile support plate with ramp, WEKO AP 232 powder
spray , Intercom to delivery, Pull lay control , Double sheet
detector , Technotrans
Blanket washing device , Airstar aircooled.
28779
Roland R 200 E
12.677 mil. of impressions, Condition Like new , Press Manager
Smart , Smart Man Job Card , Antistatic complete , BALDWIN
blanket wash-up device , GRAFIX Digitronic Powder Spray ,
TECHNOTRANS alcohol dampening system , Color Pilot <> EPL
automated plate changing , Double-sheet control , RCI-2 Ink
Control Remote , Cardboard device. Working condition .
Available now
28491
Roland R305
Rolandmatics,CPL, RCI TECHNOTRANS, IR High Pile, auto
washers.Semi auto plate loading,1/4 ,5/0 Perfecting,.230 Mil
Impression . In good working condition. Video link
:http://youtu.be/vXWT9OtXAoE. Available Now
28354
Heidelberg SM 102 5P3 LX2
Approx .145 Mil Imp CP 2000 AXIS CONTROL AUTOPLATE
PRESET PLUS(feeder and delivery) ALCOLOR TECHNOTRANS
cooling and circulation device (water cooled) TECHNOTRANS
Ink.Temp.Control CHROME blankets cylinders CHAMBER
DOCTOR BLADE LACK unit PERFECT JACKETS WASH UP devices
for blankets & rollers. GRAFIX EXATRONIC DUO PLUS powder
spray IR dryer 2 slide-in AIR supply cabinet ( water cooled)
ELTEX antistatic device EXTENDED delivery 2 moduls (X2).Free
from damage.Machine still in production in very good condition
Available Now
28332
Akiyama BT 628
Approx.220 Mil Imp,alcohol dampening, Chrome
cylinders,SAPC,plate bender and punch,chiller unit,with
Console,used as a 5 colour with Aqueous coating,Available NOW
27137
Planeta V48 21
conventional dampening molleton covers and there is no
damage to cylinders PLC control is installed in 2010 so all
controls is on PC , decurler,working condition.Max
size:1200x1600 mm.Available Now. Videos available .
Page 9 of 63
26903
Sakurai Oliver OL566D
38376470 Million Imp, Machine revolutions 47444778, Machine
Speed 4000-16100, Max sheet thickness 0.6, Semi auto plate
loading, Auto roller wash, Auto blanket wash, Auto feeder head,
side-lay, delivery and impression setting, Double impression
cylinders, Double transfer cylinders, Baldwin chiller unit, model
BC713, Titan register punch/bender, Grafix Digitron 3000 spray
unit, Off press console, Cips3
8468
Man Roland ULTRA RU5
MAX SHEET SIZE : 890 X 1260mm, CONVENTIONAL
DAMPENING, IR. Currently running. Runs at 4000 per hour.
Code 1
Page 10 of 63
6 Colour Presses
Machine ID
Model
Details
28808
Heideberg SM CD 74 6 LX
Heidelberg SM CD 74-6 LX, F size, , No. of impressions: 127
millions, Format: 58,5 x 74 cm, 6 printing units, 1 coating unit
vith engraved cylinder , Extended delivery , Preset Plus feeder ,
Alcolor Vario dampening system, Combined system for
dampening solution recirculation and refrigeration , Heidelberg
Prinect CP 2000 Control Center (Console) with touchscreen
operation , All washing automatic, with programming ,
Autoplate plate changing and cocking , Autoregister , Electronic
control of the register marks, Grafix powder device, Antistatic
protection system . Working condition, available now .
Page 11 of 63
Bag/Box Making & Other Machines
Machine ID
Model
Details
28676
Orion 800
Servo Drive, Side & Bottom Seal Machine, print rego eye, Fly
Knife, large accessories bed, has seal plate, seal roller, air jets,
antistatic bars, 800 wide machine with very light use, Can be
plug in and ready to use in minutes. Ready for shipping. In full
working order.
28333
FMC 106WX
WICKETTER MACHINE,BREAD bag machine. Available Now
Page 12 of 63
Bindery
Machine ID
Model
Details
28923
Muller Inventa
Computer Control,Automatic Feeder,Sewing Element with
Thread Supply,Separating Device for Block,Belt
Delivery.Production speed – 20 – 200 cycles/min Min size head
to tail – 120mm Max size head to tail – 385mm. Min foredge
size – 80mm , Max foredge size – 320mm ,Min lap –
6mm.Working condition. Available now .
28921
Muller Martini 3006 18
Star binder.It has 16 clamps Max speed – 6000/hour, Max cover
size – 425mm x 642mm , Min cover size – 140mm x 302mm
Max book size – 305mm x 420mm Min book size – 100mm x
140mm. Muller Martini Collator 1571 Date of manufacture
1999 has 18 hoppers.Max speed – 6000/hour
Max section
size – 320mm x 450mm •Min section size – 100mm x 120mm
.Max raceway – 85mm .Wolhenburg Three way trimmer.1995
Date of manufacture model TRJM TEC 4 ,SER/No 3578.002
.Operation mode fully automatic – 15 – 45 stacks per minute.
Manual mode 14 stacks per minute . Min copy thickness – 3mm
Max copy thickness – 60mm Max trim size – 300mm x 380mm
Min trim size – 100mm x 145mmWorking condition. Available
now. Made in Switzerland.
28911
Horizon BQ 270
Single clamp perfect binder WITH COVER FEEDER.with cover
feed, scoring to covers, spine and side glue.
Includes accessories and manuals.Working condition .available
now .
28889
Morgana Auto Creaser MK2
708202
Morgana AUTO CREASER, CAN handle a sheet size of 320 x
999. HAS BEEN used to do 8pp A4 brochures before (840mm
long) . This needs a table next to the feeder so the long sheet
has extra room to sit. Working condition. Available now.
28871
KOLBUS BF512
Feeder with destacker TS.A IR- preheating HB 530 Kobus
Compact BF 512 Blockfeeder Hotmelt back and side glue with
premelter 2 pressing stations “Copilot” with TouchScreen .
28521
Hans Muller AG 271
wire saddle stitcher,standard machine, 25mm ,ON OUR
FLOORworking condition
28519
OMM Two Hole punch
2 HOLE DRILL , With foot control.On Our floor Available Now
Page 13 of 63
27620
Vickers PBA 385
saddle stitcher can do 1 3/4 " stab, 1" staple. Single phase ON
OUR FLOOR
25819
MGD Lawson 0
heavy duty paper drill with 5 drill heads very good condition ; 3
phase, still in production code 1
25817
Duplo DC 10000S
duplo collator system 3 towers,only 2 towers work, stitcher
folder trimmer needs some work code 1
Page 14 of 63
Bindery / Saddle
Machine ID
Model
Details
28922
Muller Martini 1509
6 hoppers , Max speed 7200 per hour ,Max trim size – 380mm x
320mm Min Trim size – 105mm x 148mm Cover feeder (
model 2004) Cover feeder max speed 13,000 cycles/ hour
Min cover size head to tail – 89mm Max cover size head to tail
-310mm Min cover length – 165mm Max cover length –
520mm. Working condition. Available now.
28890
Duplo 5000 system
•
Feeder Unit ,•
Stitcher Unit, System
5000 Dynamic, a folder booklet maker .
System 5000
– Trimmer, delivery unit
counter,
available immediately.
28832
Osaka 612
Consisting 2 x hand feed stations, 5 x Hoppers feeders model
821, cover feeder,Stitching unit model 621, twin head stitcher
with 2 x hohner heads M 50/8, central air pump, 3 Knife
trimmer number 1398,Inline to 1994 OMG 641 Compensating
stacker compensating stacker delivery, 3 sets of knives, various
spare parts +2 x Osako stitching heads spare also
included.Good running condition.Available Now
28750
Muller Martini 378
brand new 378 x 3 hoppers, can be used with 335
machines.Available Now
28685
Iram 12
4 hole punch,The hydraulic table lift speed is also adjustable.
Drill bits from 3mm up to 12mm are available to use on this
drill. Distance between drill heads is adjustable from 60mm
width up to 240mm. Maximum stack height is 75mm.
Adjustable back gauge working condition.Available now
28569
Sheridan SP455 S
Sheridan Saddlebinder. Max trim size 305mm x 324mm. 6
hopers + cover feeder. 4 stitching heads (2spares) & 2 sets of
knives.5 hoppers working &1 neds work.All working really well.
Available Now.
28555
Muller Martini 1509
6 hoppers feeders ,Stitching Unit = 1509. 3 way trimmer =
1522.Belt delivery with counter, Largest book size: 365 x
305mm, Smallest book size: 145 x 100 (small knife attachment
may be available to then go down to: 100mm x 75mm) 4
stitching heads, 2 pumps , All operating & parts manuals.
Page 15 of 63
28426
Purlux DQ8E
6 hoppers with Caliper and 2 Hohner Stitching Heads Model
QS8E Three Knife Trimmer with 2 Sets of Knives Desta
Compensating Counter Stacker Air Compressors Manuals,
Operators Manual to tools SPECIFICATION: Maximum Format
: 440 x 300 mm Minimum Format : 148 x 105 mm Maximum
Stitching Thickness
: 8mm Mechanical Speed : Max:
10,000 Cycles/Hr. working conditiion , available now.
28191
Horizon Collator MC 80 A
A X1 PLUS 2 X MC 80M, 8 bins each,stitch fold, trim, collate, 2
spare sticher heads, spare set of blades,SPF& collator had new
belts. Available Now
27897
Baum omm
standard machine, 4 hole drill ,hydraulic sliding table,working
condition. Available now
27867
Duplo 5000
stitch /fold &In-line 3-knife trimming with conveyor, individual
bin control to handle various stocks in the same job set, straight
or offset stacking, up to 9,000 collated sets per hour, up to
5,000 booklets per hour, has 3,164,053 impressions.No collating
towers. Under service agreement. Available Now
27811
Brehmer 185
Brehmer sticher model 185 will do ½ inch staple ¾ inch stab
single phase still in production
27777
Muller Martini Inserter 227
3 hopper feeders,
Inserts 2 products into 1
main product,
New Siemens PLC,
Decommissioned .In good condition
27752
Muller Martini Presto
8 stations plus signature recognition on Cover Feeder. Stitcher,
three way trimmer with 1999 Muller book stacker. Available
Now
27683
Muller Martini Presto 1551
6 rotary feed hoppers plus cover feeder,3 knife trimmer, 4
stitching heads, 2 (maybe 3) spare knifes, assorted bearings,
sprockets, chain flights.GOOD FOR AGE ,Has 2 x standard
stitching heads and 2 x loop stitching heads complete and free
from damage.
27483
Brehmer Sticher
25" working condition. ON OUR FLOOR
27378
Muller Martini 321
Basic machine 321 Fox; 2 x dual feeders, model 1532 (4
feeders) 1 x 890 three knife trimmer; 4x HK75V stitching heads;
1× AC 5.5kw drive (maximum 8 feeders); 1x centering device;
3x double gathering chains (6 feeding stations); Pair of hand
feed swords for 2 station; 1 x digital speedometer; Parts for 1
up (minimum 98mm spine); 1x standard front pressing; 2 x
pressure and vacuum pump; 1 x shingle table delivery; 1 x total
and batch counter; 1 x drive for feeder in good working
condition
Page 16 of 63
27106
Heidelberg SP 455 S
Heidelberg SP-455-S stitching line With Electronic Make Ready,
excellent working condition, 4 feeders, cover feeder, 2 hand
feeder stations, Trimmer with 4th & 5th Knife, 4 Hohner
stitching heads, size max 305x324,min 78x120, ideal for
producing CD books, still in operation, available immediately
Page 17 of 63
Cylinders / Plattens / Diecutters / Foiling
Machine ID
Model
Details
28937
Heidelberg Platen
Non printing , used only for diecutting . Working condition.
Available now.
28932
Heidelberg Platen
standard machine, Grey model with rollers,working condition.ON
OUR FLOOR Available now
28874
Rapid RP180 2
web: 180mm, Unwind, 2 x print heads, scanner, die cutter,
slitter, rewind & counter. Working condition. Available
now.Manual .
28868
HeideLberg PLATTEN
Working condition. Available now.
28865
leonard Kurz Comhos
hot foil stamper that will stamp on all products (booklets ,
plastic, leather) , plate size is 230 x 120 but takes A4 sheet.
Available Now
28855
Heidelberg S
standard machine, 540 x 720mm, used as diecutter.Available
Now
28835
HeideLberg SBD
Double pile , 25" 3/4 x 35" . In good condition and no
damages. Working condition . Available now.
28770
HeideLberg GT Platen
with a foil unit attachment.Good working condition.
28686
Heidelberg T Platten
standard machine, used for diecutting .single phase.ON OUR
FLOOR. Working condition.
28680
Heidelberg GT PLATTEN
Standard machine,converted to hot foil stamping
machines,Working condition
28679
Standard machine,converted to hot foil stamping
machines,Working condition
28380
13 X 18" WORKING CONDITION.ON OUR FLOOR.
28139
Crossland 0
MAX. 660 x 910MM, clam shell,working condition.Available Now
26936
Horizon HT 30
stand alone 3 knife trimmer.
Page 18 of 63
25865
leonard Kurz Comhos
hot foil stamper that will stamp on all products (booklets ,
plastic, leather) A4 still in operation. Price is each unit code 1
23105
Heidelberg S series
Cylinder 5 X Perf Arms. Good Condition. ON OUR FLOOR $1200
EACH
Page 19 of 63
Digital Machines
Machine ID
Model
Details
28943
Gandinnovations Jeti 1224
We have in stock a virtually brand new Gandinnovations Jeti
1224 True Flatbed . This machine is a true UV inkjet flatbed
with 1220mm x 2440mm direct to sheet print capability. Used
once for a trade show. It was professionally de-commissioned in
working order Working condition . Available Now.
.
Please contact Ian or Rob on 1300 139 930 to discuss
28769
Konica minolta 65HC
does oversize A3 has book binding and collator.External firefy
RIP. Full colour digital printer. Has manuals.
28747
Roland SC 540
Eco Sol full colour Digital Printer that prints 1370mm wide rolls
it is in as new condition.Prints RGP and CMYK. Comes with
Manuals . Working condition . Available now.
28658
fuji xerox 1250
1250 complete with original Splash G620RIP (Mac) RIP
hardware and monitor.Available now.
28657
Konica minolta C6500
It comes with 3x large SRA3 trays ,Large capacity feed bin
(5000 sheets) ,EFI IC 408 RIP ,ES 1000 Specrtrophotometer
,Plus about 40 various Toner Cartriges (CMYK).800,000 clicks
(about 50/50 black to colour)This machine has always been
under a service agreement with KM and has just had a PM
(Preventative Maintenance) Working condition. Available now
28651
OCE 2090
book size 140x90mm,220gsm cover (approx) matt finish,Can
handle 32 pages 80gsm / maybe 100gsm (with text double
sided),black and white ink (no colour).Has done around 8.5m
impressions. A basic book maker unit but will only do up to a
couple of pages saddle stitched. Otherwise, it will print on
220gsm in smaller volumes.for 80/100gsm in large volumes is
no issue. Working condition. Available now.
28628
HP indigo 500
working condition, standard accessories, available now.
Page 20 of 63
28598
fuji xerox 800
Four-colour or five-colour printing (cyan, magenta, yellow,
black, clear) It has 2 x 2000 sheet bins total capacity is 4000
sheets,Fiery controller,Double siding /A3 , with clear dry ink, D 4
FINISHER WITH booklet maker, square fold trimmer, 1.3 Mil
clicks. Extensive ColorWise colour-management tools make it
possible to produce consistently brilliant output - out of the
box.Virtually BRAND NEW.
28430
Presteki 34DI X
Imp 20025258, a highly automated four-color digital offset
press ideally suited for fast turnaround, short-run, high-quality
color printing.With Infrared Dryer ,Density Control PDS-E
Colorimetric Control ,GTI Viewing Station . The 34DI produces
up to 7,000 13.39 x 18.11” sheets per hour, file-to-sellable
printed sheet consistently occurs in approximately 10 minutes.
Sheet Size Max. 340mm × 460mm; Min. 90mm × 100mm
Maximum Print Format 330mm × 450mm, with 9mm gripper
margin, Waterless ink process. Available Now
28361
Roland Soljet Pro III XJ 640
The SOLJET PRO III XJ series of large-format digital printer,
combining high-speed performance and superior image quality
for the ultimate in six-color digital printing. Numerous upgrades
make the XJ series the industry’s most advanced large-format
printers and the ideal production tools for stunning outdoor
banners, signs, vehicle graphics and more. In addition to a
maximum print speed of 458 sqft./hr. in great condition still in
production
28359
Mimaki JF1610 UV
Impression Count for Offset Presses 7477hrs, Specifications
including Dampening System: Can do viarable data and RIP
included,Inkjet ,
Flatbed UV, Double CMYK, Special's 7 COLOURS, White, Spot UV, Light Cyan, Light Magenta,
1602mm x 1016mm, General Condition:
Very Good,
Brand new lamps, Cylinder Condition: Flatbed is in great
condition.
Machine has just been services and is in great
working order, Machine be inspected under operation
Machine is running currently .One owner , Machine has just
been services and is in great working order.
Page 21 of 63
28357
Aristo TL 1617 8
High Speed Cutters, ARISTO presents a completely new
generation of flat bed plotters.Is the ideal tool for cutting e.g.
gaskets, rubber, laminates, solid fiber- and corrugated
cardboard Specifications including Dampening System:
1600mmh x 1700mmw, Economic Multihead IV,
Kasemake Design Software, Imp Count 7000 hrs est. Speed :.
Max. 1.13 m/s (max. 45 in/sec),PC controlled,Material thickness:
max. 46 mm (max. 1.8 in), depending on the tool head and
protective underlay.Ultrasonics collision shut-off – Yes - it has
both infra-red and knock sensors.•
Various tool heads -Yes.
This has MultiHead OT.T.T.M.P. IV has three tangentially
controlled tools, one oscillating, up to two marking modules, a
laser pointer as well as a colour camera for the automatic
calibration system Automatic Eye and is suitable in this
configuration for all applications.the intelligent camera system
enables quick and exact cutting of printed patterns. For that
purpose the system first realises the control points with the
camera, in the MultiHead integrated, fully automatically
calculates the compensation values for askew material, print
distortion or material changes and so guarantees exact cutting
of the contour.
PC table - Yes General Condition:
Excellent all working in exellent condition, This
machine is working faultlessly. One owner , machine is running
currently.German Made. Please note when comparing machine
prices be aware that there are sampling cutters and production
cutters. Sampling cutters a cheaper . The difference is
significant in terms of speed, accuracy, head pressure, cut
options and durability.
28320
Agfa Anapurna
MV V1.0,Built in Sept 2008 , Fully service by AGFA , New bed
belt (latest black version) , Bed with vacuum holes cleaned, 6
cols & UV gloss varnish.Available Now
28172
fuji xerox F3B 1
2009 Fuji Xerox Model F3B-1 700 Digital Colour Press with
Stacker/Feeder Extension , Saddle Stitcher Collator ,Clicks
2004000.. Available Now
28116
Konica minolta C7000 HCF
Konica MinoltaBizhub c7000 with HCF Stacker and booklet
maker.Click count is 425,000 approx and under service
agreement with Minolta.
27699
Konica minolta Bizhub Pro
C6501
total impression count is 1,041,585. EFI Fiery Controller,
Scanning Unit, Folding Unit, Staple Finisher, Booklet
Maker.Machine has been serviced by Konica Minolta.Duplex
Printing. Variable data. RIP included. Good condition.Available
Now
Page 22 of 63
Envelope Machines / Misc.
Machine ID
Model
Details
28985
Halm Jet 0
6", to and bottom feeder, alcohol dampening, working
condition. Available NOW
28984
Halm Jet 0
3", 2 colour perfector,top feeder,alcohol dampening. Good
working condition. Available now
28704
Halm Superjet JP TWOD 6D
envelope over printer, 2 colour perfecting ,dual feeder, alcohol
dampening prints top and bottom, Refurbished. RUNS 60,000
PER HOUR , USES 6 " Cylinders. All new electrics,
compressor,transformer, cleaned and checked. Available Now.
27906
Suspension Envelope Feeder Used with Ryobi 524 and GTO
27861
W & D 31J
with Skipfeeder. Produces and prints W/F blanks. Max size –
353 x 250. Min Size- 90 x 145. Grammage 70 to 150 gsm.
Printing – 1 colour outside letterpress, 1 colour inside Flexo.
Available with window change gears and window dies.
27859
W & D 18S
Used for printing Secretive patterns on large pockets, max Size
405 x 305 outside only. Inside 353 x 250
1 colour outside Letterpress. 1 colour inside Flexo. Available
with spares and books.
27478
Halm 3"
Wet Offset 2 colour minimum size min size 90 x 140 Max
Size
229 x 163 Available with Refridgeration Unit
Chemicals and storage cage and Spare parts
27475
F I SMITHE PHP
Automatic Cutting Press; Reconditioned; Max sheet size 860 x
1100; Max die size
458 x 324
27474
F I SMITHE MO
Produces Wallets and Pockets Lick and Stick only. Pre patched
W/F shapes can be made. Prints outside 1 colour flexo. Max
size Pockets 405x305
Wallets 254x325 Min size
Pockets 178x102
Wallets 152x180 Side
seam pockets have the long flap over the short seam.
Grammage – 80 – 150 gsm. Available with Spare Parts and
gears parts book and instruction books. Available Now
Page 23 of 63
26727
W & D 38 CS
2 Outside & 1 Inside Flexo Print units complete with Conti Web
Splicer Year 1983 and with chip exhaust system. Can make
inside & outside seams.Available with-Spare parts Book and
instruction Book.Working condition. Sizes - Wallets Min size 90
x 120 Max Size 162x292MM Swallow Tail Min size 90 x 20
Max Size 192 x 292 Banker Min size 90 x 120 Max size 162 x
250 Speed Latex envelopes 500 per Min
Dextrine envelopes 600 per Min Window reel Diameter 500mm
Paper weight :70-120 gsm
WITH BECKER 500 PUMP .The electrical info is 415 Volt 3 phase
VIDEOS AVAILABLE
Page 24 of 63
Folders
Machine ID
Model
Details
28939
Horizon EF 35
Small buckle folder, suitsA3 to A4, A4 to DL.Working condition
28834
Stahl T52 3 T
It has 4/buckles PLUS cross fold , tremat, and can do 16 pages .
Rubbers: good working order. Working condition. Available now
.
28761
Mathias Bauerle M3 3525
Machine in full working condition
28759
Horizon AFC 744AKTSC
Horizon Folder B1 Format Folder with round pile feeder. Max
sheet size 740 x 1100mm, min 210 x 210mm. It has 4 buckles
then 2 cross knives. It has perforating & scoring. Belt delivery.
It will do 16pp sections. Working condition .Available Now
28642
MBO B30 C
3 x 3 with a cross fold 12 buckles , can fold 16pp but can fold
32pp. 720 x 1020 sheet size .Working condition . Available
now.
28336
Stahl T32 4
table model A3 with suction feeder , 4 folding pockets, antinoise hood, Min. paper size 7x10 - Max. paper size : 32x45 cm,
min. fold length : 3,5 cm, folding speed : 140 m/min. (10000
sph), net weight : 82 kg, with SA 32 stream delivery, 0,2kW
(feeder + folding unit) - 0,05 kW (delivery), with compressor/air
pump, WITH DIGITAL COUNTER, PLUS CROSSFOLD. RUBBERS
FINE,Available NOW
28288
MBO 0
2X2 BUCKLE WITH cross fold, working condition A3 TO DL
28195
Shoei silent KT
Standard machine, A2 TO DL,working condition. Buckles and a
Knife . Roller is in good condition. Available now .
28189
G and K ZK 500 4
sheet formats : Intake Width Max : 48cm, Intake Width
(standard) Min 14cm. Sheet Length : max 31 cm. Min 10cm.
Folding performance : Speed 40-160m/min. Stroke
performance max. 20000 strokes/h. Electrical Data : Stystem
voltage(AC) 220 V-50-60Hz. 0.5kW, 3.0 A,220V, Power Drive
0.7kW.Dimensions- Length x width 1230mm x 800mm. Height
820mm -1160mm. Net weight 220kg.
27989
Shoei Star SPT 66 44
The rubber rollers on the folder are 2 years old
Page 25 of 63
27989
Shoei Star SPT 66 44
The rubber rollers on the folder are 2 years old
27931
Stahl 78 TF 4 4 4
Complete machine, 4/4 buckle, counter,no faults, Good working
condition
27820
MBO B30130 4 C
low profile continuous feed 4/4/4 folder 2 x crossfolds sound
hoods ,counter, buckle plates with swing away deflectors
27809
Horizon AFC 544AKT
Horizon cross folder 4KTT (4 buckles plus fold knife plus 2
buckles below knife); will do up to A2 size still in
production.Max Sheet: 538mm x 750mm; min Sheet Size
128mm x 148mm. Paper Counter.There is a slitting and creasing
unit just before the knife unit.Semi auto roller setting. All
manuals, tool box and grease gun that comes with the machine.
Good working condition. ON OUR FLOOR. Available Now
27703
Stahl BUH 66
6 buckle, second unit for folder with digital controls. Available
Now
27506
GUK FA 354 FE
4 buckle plates, suction head and tail, size 350mm X 650mm
27386
Stahl KC 66 4KL RF
round pile feeder, 16 pages with DELIVERY vacuum
pump,cleaned and ready to be installed. Rollers fine.working
condition 4 buckles 2 knives . Available now. ON OUR FLOOR
27033
Faltex 713
small buckle folder 2 over 2 suction feed in working condition.
A3 TO A4 .WORKING CONDITION.Available now
25782
Stahl KH66 4KTL
MODEL: KH66/KTL WITH PALLET FEEDER 4 BUCKLE,PLUS 2 x
KNIFE , 660 X 1040 MM,16 PAGE , 1000 SHEETS PER
HOUR.SIZE:MAX 66X104CM MIN 14X18CM PERFORMANCE:
MAX 230 METRES/MIN 50,000 SHEETS/HOUR (MIN Sheet size)
STACK HEIGHT 120cm FIRST FOLDING STATION 4 buckle
plates 66cm infeed width CROSS FOLD STATION KTL two knife
cross folds stations with a buckle plate after the first cross fold.
ADDITIONAL ACCESSORIES Noise hoods with CE Standard
mobile strean delivery with independent drive SAK-66H pile
board with ergonomical stacking EC conformance kit feeder and
delivery EC kit KH machine / 4 plates comfort kit KL KTL punch
perforating device 1st CF (KTL) ,Hardly Used. Video Link
Available. Available now
Page 26 of 63
23212
Purple Magna ZYS 78 444
Digital Format Folder with Round Pile Feeder; Second Side Lay,
Skip Conveyor, All Buckle - 4/4/2 buckles at sizes 78/66/56 ,
Max Sheet: 780 x 1160mm, Min Sheet: 150 x 200mm, Sheet
Range is 40-180g / metres squared, Maximum Folding Roller
Speed is 180m / min (160 lm/min), Maximum Folding Knife
Cycle Rate is 250 strokes / minute, Machine Power: 9.2kw.
Working condition. (Copy of Stahl folder). Suitable for long run
work. 32 page with specific layout. Machine includes the
appropriate shafts ; Noise Hoods; Burst Device, Perf & Slitting
Wheels (a reasonable quantity of each) - on the first unit. A
special accessory on the machine is a; Skip Conveyor and 2nd
Side Lay to enable run an A2 (A3 to DL 2 up) size sheet or
similar to be feed in 2up fold and slit on the first unit and then
skip separately into the second unit for folding - this is quite
unique and works very well - it can also do other similar
configurations of 2up .Stacker can be added for an additional
cost.All good working condition, no known damage; Code 1.
23058
Stahl KB36
Accessory: knife unit KB36 ON OUR FLOOR CODE 1A
Page 27 of 63
Folders / Gluers
Machine ID
Model
Details
28933
Horizon EF 35
Small buckle folder, suits A3 to A4, A4 to DL.ON OUR FLOOR .
AVAILABLE NOW
27903
SBL STS 650 FC
650mm ,straight line/crash lock bottom, cannot do 4 to 6 point
glue. Pile vibrator, 5 belt carriers feed table
Blank support assembly, Blank support roller bar assembly, Side
plate device, Feeder belts adjusting device
Available Now
27413
HHS 1100
STANDARD UNIT,Can be used on INLINE Gluer.8 x gun
outputs, 4 start inputs ( glue heads) with pump, 2 encoder 240v
single phase. WORKING CONDITION. Available Now.ON OUR
FLOOR
Page 28 of 63
Guillotine Blades New
Machine ID
Model
Details
23151
Polar 105 107
(9), (1295 / 1325 x 120 x 11.95 mm), $375 Each. . Code 1.
23149
Maxima 80
(3) (1000 x 140 x 10 mm), $375 Each. Code 1.
23148
Ideal 52
(3) (630 x 89 x 88 mm), $275 Each. Weight - 5.3 kg. Box
Dimensions - 70 x 15 x 5 cm ; Code 1.
23021
Wohlenberg A43DM
1 box, 3 knife trimmer knives.Near new
Page 29 of 63
Guillotine Blades Used
Machine ID
Model
Details
27401
Ideal 52
2 used ideal 52 blades 1 x 5% used @$240 1 x 10% used, @$
220.Cutting Sticks 5 for AUD$30. ON OUR FLOOR
23611
Polar 115
4 x 50% used blades. $200.00 each 2 X 15% USED @ $500
1 X 5% USED @ $ 600 each.Dimensions: 1600 x 250 x 50 x
30 kg; 2 X TUNGSTEN CARBIDE BLADE $1800 EACH. The
following approx. measurements are done from the first set of
bolt holes closest to the cutting edge : 15% blade is 50mm ;
50% blade is 70mm ; On our floor
3271
Polar 105
(2) (1295 x 120 x 11.95 mm), offers considered.On our Floor
3270
Wohlenberg 92
(1) (1100 x 125 x 12 mm), offers considered.
3267
Maxima 82
(1) (1000 x 140, 10 mm), offers considered.
3265
Wohlenberg 112/115
(1), (1380 (L) x 125 x 12 mm), (14 holes)
Page 30 of 63
Guillotines
Machine ID
Model
Details
28936
Wohlenberg 92 MCS 2 TV
Programmable 2 spare blades, good condition . Used every day
. Available now.
28935
Polar 107
Air Table ,side pile lift,spare blade , good condition. Used every
day. Available now.
28934
Polar MOHR 72 CS
Standard 72 . No Program, no air table, spare blade, good
condition. Used every day. Working condition. Available now.
28931
Polar MOHR 92 CE
Comes with spare blade. Working condition.Available now
28929
Polar 92CS
28799
Itoh 115 fc
itoh guillotine with air table , program, saftey light guard still in
production
28744
Wolenberg 44 FS 100
3 Knife trimer .Standard accessories. Has spare blades, tools
and manuals.Can be seen under power, has parts and manuals
etc . Working condition, available now.
28646
Polar 115 EM
program, safety lights, 1 spare blade, airbed, good working
condition. Available Now
28476
Maxima 80
hydraulic guillotine, 1m cutting area with 4 spare blades in
working order.Cutting size is 800 mm.
28394
Baumann BSB 3L
Table size 114cm x 80cm ,includes air table, air expulsion roller
and drop down side table. Good Condition, Available Now
28383
Mandelli 760
working condition, safety lights, no airbed, program.
28237
Polar - Mohr 76 EM
machines have spare blade (Sharp) in carrier holder, safety
lights all working. Fitted with an extra interlocking safety switch
on the back cover of the Polar. Working condition .no
airtable.Regularly Serviced. Manuals. Available Now.ON OUR
FLOOR
28117
Polar 155 CE
2 spare blades,Tool, Microcut program ,Machine is currently in
production
Page 31 of 63
28106
Polar 115
IGS cut program , safety lights, working Condition.Available
Now
27941
Perfecta 115
working condition,safety lights, 1 spare blade, manual machine.
cleaned and checked. Available Now
27195
Bauman type NUP 20
2 x Baumann pallet lifter, was used with a wohlenberg
1680mm. Lifting capacity 2000kg. ON OUR FLOOR
23556
Polar 107
Glass Rule. Brand New. On Our Floor. Code 1 A.
23286
Bauman Stacklift NU1000L
Accessory for a guillotine, 3 phase, 415 Volt, stacklift with
pneumatic top clamping and aeration, needs to be connected to
main compressor. Excellent condition. Pre cut machine.Needs a
10 cubic foot compressor. On our floor. Code 1
22857
Itoh Itoh Guillotine Parts
Variety of Spare parts. See attached list for detailed
description. Photos can be sent on request. ON OUR FLOOR.
CODE 1
Page 32 of 63
Label Presses & Accessories
Machine ID
Model
Details
28968
Sanjo Press P25S MF
6 Flexo Printing Units. Max.Web Width: 270mm Hot Plate
Stamping Unit plus Flat Bed Stamping, Laminating Unit, Die
Cutting and Sheeting Station, 6 UV Dryers, Product Rewind,
Waste Rewind, Slitting, Turnbar, Web Guide, Includes Sanjo
Plate Maker, List of cylinders,1EA B-Roll – B Doctor roller
3P10067BG1
7EA C-Roll –C Distribution roller 3P10054AG1 ,11EA F-Roll F
Distribution roller 3P10062AG1,11EA N-Roll N Upper form roll
gear 4P11036 44T, 3EA J-Roll J Distribution roller
3P10033AG1,1EA NIP Roll, 8EA Auxiliary Roll,
60 Roller Bearing 1ZFF6 ,14EA Gears Z70 ,1/8CP, 7EA Gears
Z84 1/8CP , 3EA Die Cut Cylinder , Bucket of used gears, blocs,
adjusters , 6EA Plate Cylinder shafts , 5EA Plate Cylinder –FROM
60-220 TEETH 1/8 CP,
1EA Backup Drum, 7 UV LAMPS . Change gears, spare rollers,
parts available upon request.
28940
HIKARI 250
6 colour,(OR 5 PLUS VARNISH)Semi Rotary,Straight U.V
letterpress, danfoss clutch feed system, one die station and
franchini & speri slitter rewinder. Eye graphics UV
system.Maximum web width 250mm Max Print width 230mm
Max repeat length 180mm.It does not print front and back in
one pass or have a turnbar. It does have a secondpass scanner
to multipass. Print speed is 3,500 to 4,000 impressions per
hour. This is regulated by label size. Foot print of machine - 6.8
(L) x 1.3 (W)
28910
Kopack 250 super
6 colour machine, 250 MM WEB full UV with flat bed and rotary
diecutting, 800mm CI DRUM,Softel corona treater,
delamination,BST WEB GUIDE.Rotary die Cylinders : 78, 80, 88,
98, 96, 72 T + 1 spare Anvil Cylinder Print Cylinder :98 T (5
units),88 T (6 units),96 T (6 units), 80 T (6 units),78 T (2
units),72 T (1 units),100 T (6 units) ,plus 9 shafts. Working
condition. Available now . Video available upon request.
Page 33 of 63
28896
Lintec LPM 300
66DHSHVPRV
Max Web 290mm ,Min Web Width 125mm , 6 LETTERPRESS
,Max Print Size 270 x 240, 1 SCREEN FOIL , Max FOIL Size
(along) 225 x 190 (across) 190 x 225. EMBOSSING FLEXO
VARNISH Sequence: Unwind, , Flexo, Rotary/Diecut, 1Scr,
Foil/Emboss, F/Bed Diecut, Rewind.MAX
JUMP
245
mm
, MIN
JUMP
60
mm
,
SPEED
3500 - 4000
(SCREEN/FOIL 2000 - 2500 imp/hr ). Working cond
28895
Gallus G4 TYP R200 B 02
220mm web width, NO HOT FOIL,1 x unwind reel anti spiral
device
, 1 x Erhart & Leiner infeed web
guide
, 1 x Eltex R22 dual side rotary brush
web cleaner,6 x letterpress print
stations
, 1 x auxiliary flexo
coating unit
, 1 x Flexoart unit and
auxiliary flexo coating unit , 1 x Sherman G x 10 corona
treater
, 1 x Wilden flexo
pump
, 1 x flatbed
die station
, 1 x rotary
die
station
, 1 x matrix rewind unit
, 1 x rewind manual web tension control
, 1 x web
back cutting unit
, 1 x side shear cutting unit including waste suction, 6 x print
cylinder shafts. Range of letterpress print cylinders G4: Gear
/Quantity: 80/10, 86/10, 92/9, 96/5, 100/4, 104/6, 108/9,
110/2, 116/9, 120/8, 121/8. Range of Flatbed gears G4:
Gear/Quantity: 55/1, 56/1, 58/1, 60/1, 63/1, 64/1, 66/1, 68/1, 7
Page 34 of 63
28833
Kopack Euroflex 400UV
Max. web width: 390 mm , Max. printing width: 380 mm , Max.
speed: 150 m/min. , Unwind and Infeed section 1 and 2,max.
diameter unwind 1: 800 mm , max. diameter unwind 2: 600
mm , core inner diameter: 76 mm and 152 mm , max. handling
width: 390 mm , max. operating speed: 150 m/min , Web
guidance system , Two BST optical web edge guidance systems
with ultrasonic sensors, Max. handling width: 390 mm , Max.
operating speed: 150 m/min. Corona treatment system , One
European brand dual face corona treatment and control system.
One European brand single face corona treatment and control
system. Max. treatment width: 390 mm
Max. operating speed: 150 m/min. Dual face Web cleaner
System , Two European brand dual face web cleaning systems.
Max. treatment width: 390mm , Max. operating speed: 150m/
min. 14 UV UV flexo printing units UV Flexo printing units x 6
for front-side printing UV Flexo printing and coating unit x 1 for
reverse-side printing , UV Flexo printing and coating unit x 1 for
front - or reverse-side printing , UV Flexo printing units x 6 for
front or reverse-side printing , Heavy Duty Rotary Die Cutting
Stations Two heavy duty rotary die cut stations. One before
printing, the other one for after printing. Max. cutting width:
390 mm . KTI 3-Spindle Automatic Turret rewind station .One
rewind station with three positions: capable of handling rolls
rewound up to 24” in diameter . Max. unwind diameter: 600
mm (24”) . Core inner diameter: 152 mm. Max. operating
speed: 150 m/min. With booklet feeder accessories: several
cutting cylinders and cylinders Standard machine, working
condition . Available now.
28802
Sanki Polypress
5 Colour, 220mm web width, Rotary Letterpress with UV, Comes
with a Range of Dies and Cylinders, 2X Rotary Die and One
Flatbed Die. Extra Colour Added after market originally 4
colour.. Includes about 1100 knives. Working condition and free
from damage.Machine: 636cm x 86cm Uv power supply: 80 x
50
Ist uv 26 x 60 Chiller for IST unit (WITH chiller included): 26 x
60. video link available. Available now
28641
Kopack 180
96t multicut 12 slots ,Magnetic Cylinders 60t , 84t, 72t,
96t,Cylinders :72 x 3 ,76 x 6, 80 x 6, 84 x 6, 86x 6,88 x 5, 96 x
5 , 104 x 4. Gears : 72 x 3, 76 x 6, 80 x 6, 84 x 2, 88 x 5, 96 x 5
, 104 x 4 . Working condition, Available now
Page 35 of 63
28329
Kopack 170
5 colour, UV label machine-3 UV stations, the first UV is after
the third letterpress station. The second is after the fourth
letterpress station.The third UV. Unit is after the fifth letterpress
print unit. Includes assortment of tooling - 6 rotary magnetic die
cylinders, many flatbed & flexible dies.1 x flatbed die station &
two rotary die stations. Counter that counts metres & labels,
with auto stop. Machine has a foot jogger and a button for
jogging the machine. Web guide is manual, & machine comes
with various tension controls. (unwind, rewind & waste
rewind.This machine was doing 4 colour process work &
sprocket (computer labels).All units work. Machine includes 3
new spare lamps. Plate cylinders ( 67 tooth x 5, 78 tooth x 5,
83 tooth x 5, 86 tooth x 5, 96 tooth x 5, 98 tooth x 5), 1 x
sprocket punch, 6 mag die cylinders (78 tooth, 83 tooth, 86
tooth, 2 x 96 tooth, 92 tooth) 12 flat-bed die gears . A large
range of flat-bed dies & some flexible knives. Manual and
electrical drawings; working condition; Available Now. 60
AMPS, HAS BEEN CLEANED AND some parts REFURBISHED.
New rollers.Video
Link:http://youtu.be/SWC2UuraE9s,http://youtu.be/sHVDuIgA4
dY http://www.youtube.com/watch?v=QWmEc0MBUmI,Code 1
28239
BASF AZF111
NYLO PLATEMAKER, auto wash and dry, 762MM X 1016MM.
Working condition.
28186
Pietro Prati Record TC300
WEB 300MM,working condition,100metres per minute. Good
condition for age
28121
Nilpeter 170
170mm wide web, 3 colour flexo, 2 die station, roll to roll. Top
speed 100metres minute.Record Slitter rewinder 280mm wide,
roll to roll, heaps of sliiters and blades, top speed 110 metres
minute.Mag Cylinders 65T,66T,76T,80T,84T,88T,96T SHTX12.
WORKING CONDITION.
28119
Rotomag TC 300
13’ wide, 1 colour flexo, 2 die stations, 1 perf station, will run at
170 metres per minute.sheeter.A selection of Mag cylinders
72T SHT X4 SLOTS,76T,78T,80T,83T,88T,94T SHEETERX4,96T
SHT X12. 99T, 104T Flexible dies.All gears and drive shafts
hardened. Can be seen running.Video available .
28064
Aquaflex LX1652
16 inch 400mm wide,Maximum repeat 24 inches / 609.6mm, In
feed web guide,4 colour water based /Anilox rollers- per unit (4
off) Doctor blade system-yes per unit (4 off) The Aquaflex has 2
units with IRA lights and 2 units with UV lights for drying. 3 die
cutting stations,Sprocket punch unit,Lifting crane,Reel wind
up,Fan folding Bunch unit,Sheeting unit, Plate mounting
unit,Turn Bar.Plus tooling.Video Link Available Available Now
27994
Mark Andy Flatbed
10" (250mm), diecutter only.ON OUR FLOOR.Available Now
Page 36 of 63
27992
Arsoma 410
flatbed die cutter, good condition.on our floor.Available now
27792
Arpeco tracker
slitter/rewinder/inspection,counting unit,COMES WITH 76MM,
25MM, 35MM REWIND SHAFTS.Web Width: 13” / 330 mm
Standard Size Pneumatic Shafts: Unwind & Rewind - 3” / 76.2
mm AC Motor Drive: 3 HP Maximum Diameter on Unwind: 27” /
686 mm Maximum Diameter on Rewind: 18” / 457 mm
Maximum Machine Speed: 750 Ft / 228 m) per
minute(Dependent on web type and conditions)Electrical: 220
V., Three Phase, 50/60 Hz., 20 amps(Optional 400 V.)Air: 80 –
100 p.s.i., (5 – 7 bars) Nominal Consumption Dimensions (L x D
x H): 103” / 2616 mm x 46” / 1168 mm x 65” / 1651 mm
Weight: Approx. 1600 lbs. / 726 kgs.MANUAL Available Now
27789
kymc DLM 1000
Dry lamination.Full automatic operation and continuous running
make our dry laminator essential in the manufacturing of a wide
range of multi layered packaging.Both unwind stands are turret
type for non stop production.MAX MACHINE SPEED 250 M/min
MATERIAL WIDTH (MM) 1000 MAX. ROLL DIAMETER (mm)
1000 Automatic constant tension control on both
materials.Automatic edge position control on second material
included.Rotogravure coating station with oscillating doctor
blade, driven via DC motor.Overhead drying tunnel in three
sections with own electric heater-blower.Hot oil heated ,chrome
plated laminating roller.Double water cooled chrome plated
chiller rollers after laminating.Non-stop turret type rewind stand
with flying splice and auto tension control.Rewind shafts driven
by AC vector motor with vector drive.Automatic edge position
control on rewind.Machine function by PLC control ELECTRIC
drying , 140 metres per minute,Made in Taiwan.will come with 3
anilox rollers to do water based and solvent based lamination
and approx’ 12 impression rollers at various lamination widths.
Videos available
Page 37 of 63
27784
DCM Sleeve
The DCM Sleeve is a high-speed sleeve forming and sealing
machine for the production of shrinkable sleeves.Maxi width of
parent roll 550mm ,Mini width of parent roll 45mm,.Maxi width
of Sleeve 250mm, Mini width of Sleeve 40mm. . Maxi diameter
of parent roll 600mm. Maxi diameter of Sleeve roll 600mm.
Inside flap 2 to 8mm. Outside flap 0 to 1 mm. Speed 220m/min
, supply voltage 3 x 415 V 50HZ, Compresses air 6 Bar dry,
,Unwind/rewind Speed max 250m/min., PET or PVC (40 - 50
mµ, Sleeve Width 40mm – 250mm, production speed 220mpm
,substrates PVC, PETG, OPS mainly pvc and pet, Roll Width 550
mm - 45 mm; Roll Diam 600 mm;
Automatic edge guide
with photocell ,control desk.Plus Longitudinal perforating
unit,
Hot melt applicator.Machine mainly used it for
tubing and perforating but you can do basic slitting on it. It only
has a single rewind shaft but you could put a spacer on it to
run a couple of slit rolls working condition. Machine doesn't cut
into individual finished tamper seals. The glue is needle applied
although you can also felt apply.There is no oscillation at
rewind. It is plated forming.MADE IN FRANCE. Video link
available.Available Now
27772
Arpeco Inspector
slitter/rewinder/counter, inspection unit,can be used as a spares
machine. Available now
27184
KTI Tech (Keene
Technologies) Turret
4 Spindle Turret rewinder, auto core gluing and tail
gluing,400mm web width,label count, meter count,40mm and
76mm spindles, right - left orientation to suit most slitter
rewinders or presses that are R - L orientation.can handle
perforated stock provided there is a 3mm wall on the core. In
good working condition.
27181
Rotoflex DLI 400
76mm core, shear knife slitting, crush knife slitting, individual
label & butt cut count, auto tension control, flag/millsplice
detector, sheeter/stacker conveyor, auto register control
system, semi-auto indexing, 2 die cutting stations, ultrasonic
web guide sensor, strobe light, web gripper/feeder. Max web
width: 16.25'/413mm, Max unwind diameter: 1000mm, Max
rewind diameter on single spindle machine 500mm. TO BE
SOLD WITH KTI TURRET SEE 27184
26925
Bunch 530
Max. Web Width : 250-290 mm wide,fan folding machine with
roll unwind,comes with gears and folding conveyor table.it has
10 1/4, 12 and 14 inch gears plus 80T, 82T, 96T & 112T
Change Gears. In excellent condition
Page 38 of 63
22562
Auto Punch Diecutter
Punch & die. Can do Blank labels, Adhesive labels. Laminating
Pouches. paper & cardboard blanks, vinyl plates. There is no
rotary die and machine does not have magnetic rollers. 125
mm web width. 1x 54 x 87, 65 x 95mm & 60 x 95mm.
Pneumatic & Electric. Single Phase. Made in USA. Makes
individual labels not roll. ON OUR FLOOR. On offer. Code 1 a
Page 39 of 63
Laminators / Coaters
Machine ID
Model
Details
28705
Comprint Australia 0
web width 1020 mm laminating width. Wet bond laminator
(water based adhesives ) .Materials it laminats , foil to paper,
film to paper , foil and film to board etc.(but not film to film
,that is dry bond laminating). It has a Gravure coating head, for
coating clear or coloured lacquers in line as it laminates.with
enclosed doctor blade chamber. Variable speed gear box on
lacquer coating station. Roll unwind diameter : up to 1500 mm
.cores 76 mm air shaft and 152 mm chucks. Rewind : up to
1500 mm .surface rewind . 76 mm or 152 mm chucks . Gas
drying oven. 12 spare aluminium oven idler rollers. Cooling unit,
Web guide. Laminating speed: 140 metres / minuite , plus
.Gravure Glue / adhesive application or fountain roller
alternate glue coating system.Working condition. Available now.
28693
GBC 620
For laminating paper board products such as business cards. It
accepts rolls of up to 450mm wide laminate film at around 3050 microns. This machine is hand feed with auto sheet
separation.Hot laminator, recently has had the heat roller
replaced.Single sided.semi automatic. Still in
operation.Available now.
28606
Autobond mini 105 THS
Large format thermal Autobond laminators.Machine is in very
good condition and had new drive chains throughout
approximately 12 months ago, was serviced and heater serviced
too .Used mainly for large packaging .It has Heidelberg feeder,
auto stacker.Good working condition. Available now.
28579
Fordigraph 0
Laminates up to 8500mm. Working condition , available now.
27984
YFML 720
Semi Auto Hyrdraulic Laminator, Power AC280V 50Hz, working
temperature 60-140 degrees celsius, paper thickness 80600g/m2, working speed 0 - 40m/mion, working pressure 012mpa. In good working condition.
Page 40 of 63
27704
Autobond AF DAT THERMAL
LAMINATOR
LAMINATES SIZES FROM UP TO 720 X 1020mm
PRE- LOADING UNIT
AUTOBOND SHEETER
125KG CRANE LIFT
JOGGING UNIT
SPARE THERMAL UNIT 3 SPARE RUBBER
PRESSING ROLLERS
SOME SPARE PARTS
2 STAINLESS STEEL WALKING
PLATFORMS. Available Now
26723
Hilton 450
Thermal laminator,single sheet,Heat laminate with auto feeder
and auto cut off,Feeder made in Italy, laminator and cut off
built BY Hilton Laminate Australia.Max laminate width is
450mm. Cut off is by electric eye so you could have as long a
sheet as you like.The thermal rollers are top and bottom,can
run just the top. Foot print 1 x 5 metre Availabale Now
26003
DCM Lamina 2 1000
Width 1000mm, 360mt/Minute, solventless laminator,Unwind
Roll Stand, Softal Corona Application Station, Model: CMIE022160-1KB2, Rewind Stand, Adhesive Dispensing System, Matrix
Catalyst Mix System, Model: M3 (2007), Chillers,CNC
Controller,This machine does not have a flying knife, but it can
be added and it is a wet glue machine. Electrics And Necessary
Installations.Available Now.
25286
Guangzhou Keshenglong ZBJ Semi Automatic; Max Width; 600mm X 600mm Good working
condition.Hardly used.Puts glue on two pieces of cardboard.
Code 1
Page 41 of 63
Numbering Boxes
Machine ID
Model
Details
28278
Heidelberg GTO 46 or 52
convex backward, Leibinger x 12, herben x 1 convex forward,
Atlantic x 2, Blue ocean x 2, Leibinger x 11 straight forward,
Leibinger x 5, Blue ocean x 1 Skip 2 straight forward Atlantic
brand x 2
Skip2 convex forward Atlantic brand x 1 Skip 3 straight forward
Liebinger brand x 2 skip 4 convex forward Atlantic brand x 1 .
$175 each On OUR FLOOR
27818
Heidelberg MO
To suit Heidelberg MO: 3 X convex backward, 7 x straight
forward Leibinger, Atlantic 1 x straight forward on our floor;
code 1
24577
Heidelberg Platten
Numbering Boxes to suit T Platten or GT Platten. Can also be
used on Heidelberg S series or K series cylinders.
5 x Forward $150 each. 22 x backward $150 each. 3 x
backward skip 3 $150 each. 2 x backward skip 5 $150 each. 3
x forward skip 2 $150 each. 2 x forward skip 3 $150 each. 1 x
forward skip 4 $150 each. ON OUR FLOOR. AVAILABLE NOW.
24574
AB Dick xx
2 x straight backward $100 each, 1 x straight forward
$100each. AVAILABLE NOW. ON OUR FLOOR.
24572
Ryobi 500
18.8" 1 x convex backward $100 each. ON OUR FLOOR
AVAILABLE NOW.
24571
Fuji 52
22" 1 x convex forward $200 EACH 1 x straight backward
$200 EACH. ON OUR FLOOR. AVAILABLE NOW.
24570
Itek xx
1 x straight backward skip 2 $100 each
24569
Uchida xx
5 x straight backward $150 each, 4 x straight forward $150
each, 4 x convex forward $150 each. ON OUR FLOOR
AVAILABLE NOW.
24568
Roland Praktika
To suit Roland Praktika: 3 x straight backward $200 each, 3 x
straight backward skip 4 $200 each, 3 x straight backward skip
5 $200 each. ON OUR FLOOR. AVAILABLE NOW.
Page 42 of 63
24567
Hamada 700
To suit Hamada 700: 1 x Convex Backward Skip 2 $150 each, 1
x Convex forward Skip 2 $150 each, 1 x straight backward
$150each, 3 x straight forward skip 2 $150 each, 6 x straight
backward skip 2 $150 each, 2 x straight backward skip 4 $150.
ON OUR FLOOR. AVAILABILE NOW.
24565
Ryobi 500 KNP
17" 2 x Convex Backward $100 each, 2 x convex forward $100
each, 8 x straight backward $100 each, 7 x straight forward
$100 each, 1 x convex backward skip 4 $100 each. ON OUR
FLOOR
24562
Heidelberg GTO 46 52
Leibinger GTO Specialised Boxes 2 x straight forward 6 wheels
with space . These when used would read 12 4567 with a
space between the second and third digit.Price $200 each ON
OUR FLOOR.
24560
Herben GTO Specialised Boxes: 2 x straight forward 8 wheels.
These when used would read similar to 1 8452671 with a space
between the first digit and the second.Price AUD $200 each .ON
OUR FLOOR
5898
Rollem xx
Perforating Rings x 9 for Heidelberg K SERIES MACHINES $150
each
3380
Ryobi x
1 numbering ring, 5 units Straight Backwards, Imprint
numbering block, 95 mm. Good condition. ON OUR FLOOR
2637
AM International Multi 1250
Numbering Ring Plus Two Numbering Boxes - 150 Each.
Numbering Ring - $100.
Page 43 of 63
Other Equipment
Machine ID
Model
Details
28876
OMG SRL SIN CRONOS
Horizontal automatic hopper loader was for an inkjet printer.
Brand New.
28869
Linotype Platten
Working Condition, available now
28812
senator Silent P 40 S
AS NEW compressor,only 4 months old used for 2 months only.
Installed in end April and used till end June. Used to run a 4 & 5
A2 colour RolandS and a A2 CELLOGLAZIER. Soundproofed
cabinets with a fan–forced cooling system.Compact cabinet size
achieved by vertical stacking of the compressor pump & motor
saves floor space.Fully Automatic on-off operation via the
control panel.‘Low oil’ & ‘motor overload shutdown’ Protection
Systems safeguard against major component damage.Low
speed, Oversized piston compressor Pump ensures high
reliability.Compliant with Australian OH&S regulations.ON OUR
FLOOR. AVAILABLE NOW
28474
Printer's Parts Itek 985
2 xWater Ductor Roller (New Style) for Ryobi 3200MCD & Itek
985.price is $90 each. Available Now
28467
Printer's Parts Itek 985
Water Ductor Roll;er (New Style) for Ryobi 3200MCD & Itek 985
28466
Printer's Parts Ryobi 3200
Water form Roller for Ryobi 3200 MCD & Itek 985
28456
Printer's Parts Ryobi 3302
Set of 9 Rubber Rollers for Ryobi 3302 & Itek 3985(32R-K) x 2 under offer
28428
SIAT 2002
PALLET WRAPPER, Very Good Condition, working. Available
now.
Page 44 of 63
28187
HCT Core cutter FPT 1300
•
For paper core cutting operation, cutting length
under 50mm or 50-1300mm.•
Simplified design,
unskilled operator can be familiarized with the machine in a
short time.Core Cutter ,WORKING CONDITION, STANDARD
MACHINE 1300MM WIDE•
Fixed cutter structure is
suitable for the mass production especially for same cutting
length.Specifications
FPT-500 (1300) Core Cutting Machine
/ Core cutter - Paper Core inner Dia. [mm]
76 / 3" (Or
on request)Paper Core Length [mm] 1300 [max.]Paper Core
thickness mm]
8 [max.]Cutting Length
[mm]
20-450 (5-1000). ON OUR FLOOR
27909
Ultra Violet Tunnel
UV light, 2 x lamps, approximately 450mm wide with blower/
extractor, control panel, speed meter. Uses UV inks dried by UV
light to print on plastics and vinyl labels/ (for example bumper
stickers, chemical labels and danger tags). Wheel it up to any
press – used with Ryobi 524 and GTO. Good condition
27608
w.i.n roller washer 0
single phase roller washer ,stainless steel, will do up to 850mm
good condition on our floor
27300
Aldus Stockdale roller washer roller washer that will do up to 900mm ,single phase.ON OUR
FLOOR
25873
US MADE 1200
22485
Cascade Kraftsmaster Paper Model RK 12D 1 x Reel grab for Foklift, 1050 MM MAX ROLL
Roll Clamp
DIA, width of roll, Can pick up 1200 kgs . Can fit onto 1.5 to 2.5
tonne Forklift. Can go onto any fork . On our floor
DELIVERY table for sheeter, 30 x 40" Can wheel pallet into
Page 45 of 63
Packaging
Machine ID
Model
Details
28867
Chambon London 350
GRAVURE PRESS,web width 355mm, 350MM PRINT , Max
unwind dia :1200mm, max rewind dia: 600mm, max number of
colours: 6, max cylinder repeat: 380mm, min cylinder repeat :
172mm, max cylinder width: 372mm, unwind and rewind core
:76mm, Max print speed : 4000 metersp/h. print and feed
cylinder repeat sizes: 308mm,
317.5mm,320mm,320.4mm,348mm,360mm, 380mm. Area, has
rotary creasing and die-cutting ,can print both sides of web at
the same time 2+4,was making tea bags and envelopes.Tea
Tag Die Inventory , small constanta tag die to suit 350mm
Chambon. Tag size 23mm ide x 28mm deep. Die 14
acrossx23mm, Uses 340mm web. 11around x28mm,308mm
circumference.00-1041-C2000 hard tag with bevelled corners.
To suit 500mm Mark Andy 4150. Tag size 26mm wide x 28mm
deep. Die 18 across x 26mm. Used 480mmweb. 20around x
28mm.560mm circumference. 01-1024 Constanta large tag to
suit 350mm Chambon. Tag size 28mm wide x 32mm deep. Die"
12 across x 28mm. Uses 350mmweb. 10 around x
32mm.320mm circumference. 02-1009.Constanta large tag to
suit 500mm Mark andy 4150. Tag size 28mm widex 32mmdeep.
Die :17 acoss x 28mm. Uses 485mmweb.18 around
x32mm.576mm circumference.Video Link availableAvailable
NOW
28429
Victory Kidder Centraflex 434 4 colour ,central impression.1973 Max. print width 1134 mm,
Max Web width 1190 mm, Max press speed 300 metres / min,
unwind diameter 610 mm ,rewind :::::::::::: 610 mm
turret unwind and rewind , 76 mm air shafts , web guide, Full
set of gears, gear pitch 10 DP, Print cylinder repeat , 303.23
mm 4 cyl, 359.08 mm 10 , 534.64 mm ,10, 391 mm ,6 , About
12 rubber fountain rollers
10 rubber coating rollers ,misc. spares, original operating / parts
manual available.The machine is in production now. Running
well.Printing film 15 to 40 micron and 25 gsm to 80 gsm paper ,
mainly 500 mm to 760 mm wide materials. Machine is in good
overall condition.Holds very good print register. Available in
September,2014. Video link available
Page 46 of 63
28302
CMF Superflex 1200
Mirage 806 ,6 COLOUR FLEXO, IS PRODUCING PRINTED
PLASTIC ROLLS THAT ARE THEN USED FOR BREAD BAGS,
SALAD BAGS ETC .Web width 1200mm In production. Available
October 2014. Video Link available .
28301
CEM 1200
SPECIFICATIONS:6 COLOUR FLEXO, HAS RUN AS 5 COLOUR ,
NUMBER 4 UNIT DOES NOT HAVE ANY ANILOX ROLLERS WAS
PRODUCING PRINT PLASTIC ROLLS THAT WERE THEN USED
FOR BREAD BAGS, SALAD BAGS ETC .11 different cylinder
sizes.Needs some repairs- heaters need to be replaced,
electrical box re wiring, rubber rollers need replacing.Not in
production. Available Now
Page 47 of 63
Pre Press Cameras & Accessories
Machine ID
Model
Details
3650
Schneider xx
240mm. Camera lens
3648
Rodenstock xx
270mm. Camera lens
3647
Eskofot Ultragen
150mm. Camera lens
3646
Nikkar xx
480, 305, 500 mm. $400 / $200 / $500. camera lens
3645
Kokoma xx
36cm x 34cm, Filter For Cromalin Machines.
Page 48 of 63
Pre Press CTP and Plate Makers
Machine ID
Model
Details
28956
Heidelberg 2165 Prosetter
PLATE PROCESSOR - GLUNZ & JENSEN RAPTOR PRO 68P MODEL:MP68.PRODUCTION DATE 01/10. PLATE STACKER GLUNZ & JENSEN MODEL: STACKER Mkiiii 85/105SP. DATE:
JANUARY 2005. CHILLER FOR PLATE PROCESSOR
MODEL:8735001001 MONTH/YEAR: SEPTEMBER 2009 RIP PC
COMPUTER running windows server 2003, WITH MONITOR
KEYBOARD AND DONGLE. Has connection to Prinect CP2000
Center" Meta Dimension version V5.0, the Prinect CP2000
Center Version V41.Can also Violet-sensitive silver halide- or
photopolymer aluminum plates, 405 -410 nm;For the semiautomatic plate handling is yellow light required.Dimensions
1.730 x 1.385 x 1.560 mm Weight 475 kg Printing Plate Formats
min. 370 x 323 mm max. 670 x 750 mm Exposure Area max.
645 x 750 mm Printing Plate Thickness 0,15 – 0,30 mm
Lasertype Violett-Laserdiode, 405 nm, 30 mW (for
Silberhalogenid-Plates at 5 mW adjustable), Laser Class 1
Resolutions 2.400/2.540/3.200/3.386 dpi Repeatability ± 5 µm
for four successive exposures relative to the punching position
at 23 ° C and 60% relative Humidity, ± 25 µm relative to the
plate edge. Productivity up to 16 (Plates/hour at 2.540 dpi).
Available NOW
28916
Screen P 423 G
Double sided exposure frame exposure size 1150 cm x 920 cm ,
8 KW light source
vey solid unit. Working condition, available now .
28863
Raptor 68
standard processor,Working conditon, Available now.
28752
ECRM Mako 36
RIP level 6 . Multiline Classic Film Processor and a Proteck Plate
Processor.Comes with Manual . Available now . Working
condition.
28688
Heidelberg Prosetter 74 type Platesetter can handle 52 and 74 size plates No processor OR
2165
RIP Using LAPV - Violet agfa plates.Dimensions (W x D x H)
1,730 x 1,385 x 1,560 mm Weight 475 kg Plate format (H x W)
Max. It can do 52 also. Plates sizes range from a minimum of
370 x 323 mm to a maximum of 670 x 760 mm .Plate thickness
0.15–0.30 mm (6–12 mil).NO Rip.Available now
Page 49 of 63
28174
Heideberg Topsetter
Low plate usage, Autoloader with interleave tray, suitable for 52
or 74cm plates. Pninect front end and Epsom Proofer ,Running
Kodak thermal plates also comes with processor for Agfa plates.
28169
Eskofot DPX
454mm wide roll to suit SM52 Dual punch 220mm . Automatic
positioning.Can take two core sizes. Standard machine.
Available Now
27905
Fuji Film Luxel V6 Platemaker manuals, 2 cassettes, fully automatic, Luxel V6 laser drum, G&J
MP85 Processor S/N 928520186
G&J 85/105 Stacker S/N 935141041, PAT – 506id Filter Unit,
Good condition. Comes with a RIP
27896
Kodak trendsetter
27756
Glunz Jensen Platerider 2400 Running a harlequin rip version 8.1 with software. A2.Available
Now
27623
Teaneck Graphics 0
Full sheet size burn down frame with 2 spare globe. ON OUR
FLOOR
27609
Screen P 814B
standard Machine. Plate maker in working condition. ON OUR
FLOOR
spare parts only
Page 50 of 63
Pre Press Digital Printer
Machine ID
Model
Details
25688
Kodak Digimaster BW 9110
49 Million Impressions, 6 Draw Input (4 x A3
draws),
Finishing: top exit/stapler/stacker,
Stacker:
Capacity up to 5,000 sheets,
Receiver: Wheeled tote
tray,
Resolution: 600dpi,
Speed: approx 6,500 A4
sheets per hour,Operator Interface: Touch screen or
mouse,black and white printing. GOOD working condition Code
1 VIEW MACHINE http://youtu.be/zd-qIBqXsm4 (PART 1) AND
ALSO
http://www.youtube.com/watch?v=x9Wk3F2f0Qs&feature=yout
Page 51 of 63
Pre Press Miscellaneous
Machine ID
Model
Details
28762
Heideberg GTO plate punch
near new table top GTO plate punch, used for a PM GTO press
previously.ON OUR FLOOR.
28760
EZ CORP REIDO
27706
YU CA Undustries YC 780
CRB
Digital plate punch AND bender , Suit 740 SHEET SIZE PRESS
Good working condition Available Now ON OUR FLOOR
27606
Heidelberg Plate Bender
standard plate bender, for heidelberg presses 102/74.Previously
used with 2005 CD 102-10P.ON OUR FLOOR. Available now
26809
Bacher TYPE 2045
Bacher control 2000 Plate Register Punch, Type 2045,ON OUR
FLOOR
23570
Duarte SII 228P
Plate punch to suit Komori SII 228P, Duarte, Manual Punch, can
be inspected. BENCH TOP On our Floor Code 1
23506
Itoh Plate Punch TP-30
TP-30 Plate Punch, A4 Sheet Size. ON OUR FLOOR Code 1
Page 52 of 63
Screen Printing Machines
Machine ID
Model
Details
28914
Dolev 800V
8 page image setter 3 sizes cassettes loaded film max size
1100 cm x 820 cm min size 30cm x 15cm
with inline deep tank Carnfeldt auto processor,and brisque 5
software incl auto trap imposeon a 4 prossesor unix platform
with extra ram and hard discs all connection cables. Fully
services by Kodak
28637
Sias Serifast
Will UV FLOOD AND SPOT coat or print a 1200x1600mm
sheets,WITH SIAS DRYER Refurbished, Supplied with 3 screens
Blades. Manual feeder.Working Condition,Dismantled ready for
shipment. Available Now.
28400
Sakurai SCM 102
with a SiasPrint UV POLAR CM110 dryer . UV dryer will do 1000
x 715 sheet size and 1500 sheets an hour when in production.
Was printing polypropylene of a thickness range from 0.6mm up
to 1.9mm. Can do both spot and flood coating.The cylinder is
capable of printing sheet to a maximum size 1020 x
735mm.Maximum print size is 1000 x 715mm.Output Rate:
1500 sheets/hr, Footprint: 4.5m long by 1.5m wide., Power:
415 volts. Working condition and available now.ON OUR FLOOR
27902
Advance/Chicago USA
Horizon
Five colour carousel with UV dryers, table size is 1100 mm x
970mm, print / vacuum area 600 x 950. Model 8x25x36.
Machine diameter - 6 metre.can handle a variety of substrates
including core flute, plastic.Good Register. In full working
order.
27444
Serifast 0
Serifast 60 x 40 inch fully automatic single colour machine with
Mirus feeder.
Max Print: 1600 x 1150mm. This machine has been modified
with Air hydrolic squeegee and scraper system and a quick
release screen system. UV dyer is an ADCO single lamp with
low medium and high settings + belt tracking
27443
Serifast 0
30 x 40 inch fully automatic single colour machine with Mirus
feeder
Max Print: 1200 x 1100mm SeriGra hot and cold air dryer with
UV bridge built in, also has tracking system on the belt.
Page 53 of 63
26694
Sias Prima Semi Automatic
SEMI AUTOMATIC SILK SCREEN MACHINE Print Area: 80 x 120
cm includes sensors, accessories, approximately 5 wooden
screens at various sizes, squeegees and scrapers. Made in Italy
Volts: 400 Frequency: 50HZ KW: 6 Outer Dimensions: 308 x
180 cm Machine specifications indicate maximum printable
thickness is 5 to 6mm, the maximum LNI has printed is 3mm
corflute, 3mm PVC and 2mm aluminium. Excellent working
condition
26671
Agfa Azura PT-R8000
Agfa Azura C125 inline processor and Elantrix plate stacker
26523
Sias PSMATIC
2000mm width x 1500mm length print area Very versatile
machine in good condition.with Svecia Conventional and UV
combo Dryer for an additional cost.Had a full refurbishment in
June 2010 and is in as new condition
Page 54 of 63
Shrinkwrapper
Machine ID
Model
Details
28518
Turbopack 0
STANDARD MACHINE,A3+,has a sealing area of 380mm x
550mm x 200mm (height) and uses a sealing blade to seal and
cut the film while shrinking the film in the chamber whilst the
hood is down. Working condition.ON OUR FLOOR
27810
youngson pack 0
shrink wrapper that will do oversize A3 still in production
23278
Minipack 76
540x390mm , shrink wrapper, working condition.ON THE
FLOOR
Page 55 of 63
Slitter/ Rewinder / Sheeters
Machine ID
Model
Details
28977
Marquip Inc 2250
2250mm wide sheeter with auto splice, web guide, and auto
pallet change. Can be seen in operation.In excellent
condition.Available Now
28945
ACE Machinery Company
1600SD
slitter/rewinder Perfect working order.Fitted with tidland
airshafts. 6 inch,3 inch,2.1/4 inch unwind shafts and 2.1/4
inch and 3 inch rewind. Spare shafts.Dual rewind also has
Optic eye edge guide. Multiple cuts. Gripping bar allowing for
thicker materials. Electro-magnetic clutch braking system.Web
Width up to 1620mm. Also a fitting for the forklift to carry and
load master rolls. Available now. Made in Korea
28801
Australian Paper Equipment
0
large reel to reel slitter can do up to 1600mm wide still in
operation
28798
Strachan and Henshaw Stack large stack sheeter 1400mm wide still in production
sheeter
28717
Dusenberry 10 000
film width slitting 1300 mm wide , shear cut slitting 1250 mm
(paper , laminates etc) 76 mm unwind with 152 mm chucks as
well . 76 mm slip core rewind.Web guide , both razor and shear
cut blades , speed , up to 300 metres / minute . Slits film ,
paper, various laminates etc . Currently in production and
running well. Available now.
28425
Beck 1600
sheeter with 1 shaftless reel stand and auto down stacker, web
width : 1600mm. Available Now
28334
Dusenbury 1200
1200mm slitter, working condition.
27723
Bimec STB 60
Type of slit : rotating knives, razor blades, Web width max
[mm] : 1100, Input reel diam [mm] : 1000, Core diam : 3 or
76.2mm, Rewinding : yes, Output reel diam [mm] : 600, Core
diam : 3’ or 76.2mm, Substrates : BOPP, PET, laminates, paper,
Guider for printed line or edge, hydraulic arms to pick up the
reel, table tension control,1 air shaft suitable for ICD 3" 1 air
chucks for ICD 6", banana roller .Can slit self adhesive
stock.Available Now
Page 56 of 63
27594
Rapid CSR250
Dual Rewind Paper Slitting Machine. Features:
Pneumatic
foot controlled core chucks,
Electronic counting for
labels & length,
Slow down preset counter,
Web width up to 250mm,
38mm &
76mm expanding core chucks supplied,
Fibre optic
label detection,
Strobe label viewing (strobe light is
attached but not working),
Auto web guiding,
Built in trim extractor, in excellent
condition.Available Now
27583
Sanwa S 300
Auto Slitter S-300, maximum paper width 300mm, maximum
diameter raw - raw axis 450-75, Axis other size OPTION winding
- size of the take-up roll 450-75 3 how key locking 25/40/45/50
other, slit method Shah, maximum velocity 70m per minute, Set
counter (standard), proximity sensor 4-digit minimum unit 10cm
transmission sensor, One 4-digit minimum unit, with snap SW
counting length measurement, Transparent disk fixed outer
diameter 450 × inner diameter 75, powder clutch V-belt drive
system, Seven upper blade SET 5 set lower blade SET, 300W
motor speed controller, 100V · 5A
27171
Evtec EC2028
Sheeter, can batch in small sizes the smallest batched was 8
1/2", It will deep pile,was used by present owner to a maximum
22".The gauge goes to 28".Can therefore do 28" or modified
easily to handle 28".A 28" gear for cutting that length would be
needed.Good condition for age. Also available for an additional
cost 8 air skates to allow the machine to be moved around.AeroGo Load Module Set – Model #4K12NL, having a maximum
capacity of 8,000 lbs (3.5 tonnes) at 25 psi (1.7 bar) This set
comprises 4 x K12N Load Modules with quick disconnect
adaptors, 4 x 6m long colour coded interconnecting hoses with
quick disconnect adaptors (both ends), and a 4-station regulator
control console with quick disconnect adaptor outlets and one
ON/OFF ball valve on the inlet. Available now
Page 57 of 63
Spare Parts / Consumables
Machine ID
Model
Details
28901
Australian 0
Surplus Paper, 7 pallets of different types and sizes of paper.
28265
To suit GTO: Heidelberg NUMBERING CAMS: 2 Liebinger x
double sided(1 cam that does left and right) $400 each, 3
Liebinger x left hand $300 each, 4 Liebinger x right hand $300
each,5 x Herben magna cams $275 each ; 9 x Heidelberg
NUMBERING RINGS $350 each, 1 x Herben Perforating Arms
$350 each, 5 x Heidelberg perf arms with K head $700 each, 9
x Heidelberg perf arms $500 each; 10 x Herben perf arms $350
each ;
NUMBERING BLOCKS 8 x 45mm $175 each, 10 x
35mm $150 each. On our floor
28143
Heidelberg 52 numbering
unit
Numbering and perforating unit with Numbering shaft -2 x
liebinger straight b/ward boxes, 2 x numbering ring,1 x left
hand cam & right hand cam, 1 x perf arm.Available Now ON
OUR FLOOR
28040
Heidelberg MO
2 x Complete numbering and perforating Units, with Numbering
Shaft, perforating arm and Rings,STANDARD ACCESSORIES ON
OUR FLOOR CODE 1
27404
Heidelberg GTO 52
BLANKET CLAMPS X 5 @ $152 each Good condition. ON OUR
FLOOR
27196
IST UV UNIT E55 3 2 DR
1 X UV Unit. Available Now. Previously used with Web Press.
ON OUR FLOOR
27133
Technotrans Alpha d chiller
6E
Chilling unit , 40 litre - 6E. Good working condition.three phase
chiller unit will do 1 to 6 colour made in Germany Available
now.ON OUR FLOOR
27059
Shinohara 52
the unit has been cleaned and painted, and rubber rollers have
been recovered. It also comes with 4 perf arms, 2 numbering
cams and all of the parts to fit it to the machine. Will suit a
2001+ Shinohara
26386
Heidelberg GTO
Cross Perforating Device TO SUIT GTO 52 PRESSES.ON OUR
FLOOR
25701
Heidelberg Perf Arm
To Suit K line. Available Now. Code 1.
Page 58 of 63
25701
Heidelberg Perf Arm
To Suit K line. Available Now. Code 1.
25608
Heideberg trolleys
various size original Heidelberg trolleys
4 trolleys 920 x 660mm ; 4 trolleys 670 x 460mm ; 2 Kora
trolleys; 1 trolley 580 x 410mm ; 1 trolley 540 x 390mm
25607
Heideberg cylinder feedboard 1 x cylinder feedboard 620 x 400mm; 2 x Kord feedboards 640
x 450mm
25606
Heideberg Cylinder Chassis
35 Cylinder Chassis in total,
19 KSBA 450 x525mm; 2 KS 520 x 380mm; 1 770 x 610mm; 3
520 x595mm; 2 600 x 720mm; 8 570 x 450mm
25605
Heideberg t platen chassis
20 T Platen Chassis
25604
Heideberg GTO 52 rollers
(used)
29 x GTO 52 rollers various types
25603
Heideberg GTO 46 Jacket
clamp
1 jacket clamp
25602
Heideberg gto46
gto plate clamps. Available Now
25601
Heideberg GTO46 numbering 4 x Numbering unit rollers to suit gto 46 (3 rubber and 1
rollers
chrome)
25600
Heideberg GTO 46 rollers
20 x GTO 46 rollers of various types (chrome, plastic and
rubber)
25599
Heideberg cylinder wash up
trays
2 x wash up trays to suit a Kord and a Kors
25598
Heideberg cylinder lock up
bars
4 x lock up bars for the heidelberg cylinders 820mm, 770mm,
720mm & 570mm
25597
Heideberg Kora
8 x Kora rollers
24578
Ryobi 3200
4 x 3200 MCD Blankets Size: 330 x 496 mm $450 each, 4 x
3200 PFA Blankets Size 310 x 486 mm, Part No.
533024268.$450 each.
24557
Heidelberg GTO Rotary Shell Rotary Shell 1 x GTO52 $3500.PART NUMBER- OLD :
69.410.001 & NEW : MV.021.957. Can be used as a over
printer.The unit bolts onto the numbering shaft and a plate
similar to a label press that sticks on to the rotary shell itself is
used with the ink duct from the numbering unit for the colour
On our floor
24556
Heidelberg GTO
Trolleys 2 x GTO52 $500 each. On our floor.
Page 59 of 63
24556
Heidelberg GTO
Trolleys 2 x GTO52 $500 each. On our floor.
24555
Heidelberg GTO
Feed Board 1 x GTO46 $200 each. On our floor.
24548
Heidelberg MO
10 x Heidelberg Perforating arms $1200 each, 3 x Herben perf
arms $ 850 each, 9 x Numbering (mounting) Rings $300 each. 3
x numbering cams double $800; 3 x numbering cams R/H $400
each; 3 x numbering cams L/H $400 each; ON OUR FLOOR.
24547
Ryobi 500KNP
Nylon plate holder to suit Ryobi 500 KNP $650 each. 1 x
imprint block 95mm $100 each
24546
Heidelberg S Series
5 x Perforating Heads to suit Heidelberg S Series Machine.
$500 each
24545
Heidelberg K Series
Perforating Heads/blocks to suit Heldelberg K line machine x 9
$500 each. Perforating arms 2 x Heidelberg with Kline head
$250 each.ON OUR FLOOR
23718
Heidelberg GTO 46
Rear plate clamp kit for GTO 46. ON OUR FLOOR Code 1
23586
Heidelberg Chases
8 Chasis to suit a Heidelberg Cylinder 38 x 52 at $250 each plus
gst exsite. Postage or freight additional cost.
23164
AM International Multi
Various parts for AM International Multi 1650. Blanket Clamps
(1), Offers Considered, $AUD 150.
23 x Rollers for AM Multi 1250 @ $60 each or $1,000 for the lot.
(3) Bars, Offers Considered, $AUD 150.
(1) Handle. (4) Belt Guides, $AUD 120 each. (2) Blanket
Clamps, $100 Set. 1 x 5481 - 52 (Block) (7) Blankets, $6 each.
Code 1.
23163
Hamada 800
50-40 Roller Covers x 4, Offers Considered. Code 1.
23162
Hamada 700
Rollers Fair Cord, Gripper Bars Del - 1 Complete Set, A. Guards.
Code 1.
23161
Hamada 600
35-25 Roller Covers x 3, Offers Considered. Code 1.
23158
Heidelberg KORD 64
3 x Delivery Trolleys, $220 each. Code 1.
23157
Heidelberg KORD 64
Nyto Shell, for Plastic Plates.2 shells in stock one is a chrome
Kord shell 65cm wide the other is a 52 cm print area. Code 1.
23155
Heidelberg SORDZ
Delivery Trolleys (4). $400 each. Code 1.
23107
Heidelberg SBG
1x paper trolley for Heidelberg SBG cylinder.
Page 60 of 63
23104
Heidelberg SORD
26 brand new Rollers for a Heidelberg SORD [AUD $150 per
roller].
23103
Heidelberg SBG
1 x feeder board 30" for SBG Cylinder
23101
Heidelberg GTO 52
Brand New. 2 sets of rollers (24) including 3 dampener rollers
+ 2 sets of ink rollers except dampener rollers (18). $90 each
roller exsite plus gst and delivery.
22860
Heidelberg Speedmaster 102 See attached list for detailed description. Photos can be sent on
request ; On our floor. Code 1.
22859
sunraiser parts
Sunraiser verko see attached photos for detailed descriptions.
ON OUR FLOOR. CODE 1
22858
Stahl Stahl Folder Parts
See attached list for detailed description. Photos can be sent on
request; ON OUR FLOOR. CODE 1
22856
Polar Polar Guillotine parts
Spare parts see attached for detailed description.Includes polar
board for Polar 155 EMC,APPROX. 1985+ ZA3.015.357 .ON OUR
FLOOR. Code 1
10071
Komori Parts List
Sample of the parts included in the package; 3XAreo pump
rebuild kits,1XMain drive shaft, 3XDelivery weights.1XHolder,
20XSolenoid filters, 40XButton Cap. Plus motors and much more
Most of the Komori parts 98% new and the only parts that are
second hand are 1: Komori button assemblies
2: the Komori floats 3: the plate scanner board 4: the delivery
weights 5: solenoid valve part no 370-8100-170 (1 only the rest
are new) 6: dampener air cylinder 444-4284-014 (4 only the
rest are new)
7: the side motor PNB-10152 this is reconditioned .See attached
list for detailed description. Photos ON ATTACHED LIST.On our
Floor Code 1
9457
Paper Pallets x
45,000 sheets. Working condition. Code 1
8627
Heideberg 00
1 x new lock up bar to suit "S" cylinder 770 mm wide.
4270
Polar xx
Part for Polar 115CE - Part No. : 208164 (Brand New).
3385
Ryobi 480
Parts - 2 x 5481 -94 (Holden),
3381
Australian Made xx
Perf Strips For Any Guillotine, Offers Considered.
3368
Heidelberg GTO
Gripper Tension Spring (5).
Page 61 of 63
Web Accessories
Machine ID
Model
Details
28110
Goss compensating stacker
27070
Giebler R520
TOOLING: 4 X 24" offset cassette, 6 x 22" offset cassette,3 X
17" offset cassette@ $5000 PER CASSETTE.1 x Techno trans
Cooling Unit - $8000, 1 x IST UV, 1991- $5000 which can be
added to a similar press.***** EXSITE PRICES
Page 62 of 63
Web Presses/Business Form
Machine ID
Model
Details
28905
Edelmann Formall V38
reel to sheet, reel to reel, reel to fold,tinter, perforating A4,11"
8.5",4 units, variable cylinders,file hole for 8.5 and 11" inline,
secondary perf for 11" and 8.5". Web width:380mm.NO NP
FACILITYAvailable Now.
27740
MAN Plamag
Druckmaschinen AG
COROMAN
USED TO PRINT POSTERS FOR STREET CORNERS OR CORNER
SHOPS.COLDSET.GREAT FOR ELECTION /PRODUCT/EVENT
PROMOTION.2 x tri colour units (4 colours on top and 2 colours
below) with 8 page tabloid/ 4 broad sheet FWC 24
folder,broadsheet-news page (1st longitudinal fold) mm 578 x
350 … 457.5 tabloid size (2nd fold, 1st cross fold) mm 289 x
350 .457.5 splicer,can run 4 colour.578 MM CUTOFF , MAX 915
MM WEB WIDTH MIN WEB WIDTH 700MM .Max reel: 1067mm.
Reel Core : 76mm . Paper 38-60 g/m2.Splicer.Control
desk.punch and bender.One reel stand it is part of the left hand
printing unit.Dimensions: 11meters long x 4 meters high x 7
meters wide.Was running on central air there is no transformer
with the machine. Good working condition, complete and free
from damage. With manuals.Machine is disconnected ready for
shipment . ON OUR FLOOR. Available Now
27533
Didde Glasser DGS 860
17" 4 colour web Double row sprocket punch, Register Ruller for checking register of hole on the paper / product.Plate
bender, No One time carbon equipment,Alchol dampening, web
guide, tension control with Reel / Reel, Reel / Sheet, Reel /
Fold, including on line Tinter unit, turn bar. 17 inch 2 cross
prefer cylinders. All full size Cylinders. Instruction Manual
,wiring diagram. Power needed to run the machine 150 / 200
Amps.ON OUR FLOOR
Page 63 of 63

As New Product Catalog - As New Printing Machinery Company

Transcription

Similar documents

Geerings Print Brochure

As New Product Catalog - As New Printing Machinery Company

What we`re working with.

As New Product Catalog - As New Printing Machinery Company

Commitment to Quality Product Catalog

page1

SandFlex - Surface Innovation

modern designs - Resene Paints

Heidelberg Systemservice. Our Service for You.

Congress Committee ISNIP ECNS ISBET

Profile - Nupress

Mondo Bondo Product Guide