pdf Brochure

NO MINIMUMS - NO RESERVES
PUBLIC AUCTION
Closing Facility
THE FORMER PLUM CREEK MERIDIAN REMAN PLANT
Reman Plant & Rolling Stock
9AM - WEDNESDAY - JULY 22
Preview 8-4pm, Tuesday, July 21
240 W. Taylor Avenue, Meridian, ID 83642
CEMCO 6000 SERIES
CLARKES PNEU-AIRE PRIMARY FILTER 57-20
1997 KOMO VR804ST
MID OREGON PS-50
James G. Murphy Co.
Commercial & Industrial Auctioneers
Bid live or bid online
with MurphyLIVE!
1.800.426.3008 - 425.486.1246 - murphyauction.com
NO MINIMUMS - NO RESERVES
EDGER
SWENSON 2-SAW VERTICAL ARBOR EDGER W/8-KNIFE HEADS, 10 HP/3450 RPM
ARBOR DRIVE MOTOR, 7.5 HP FEED DRIVE, TOP HOLD DOWNS, 6’ INFEED
GRAVITY ROLLS, 60”X94” 8,000 LB. SCISSOR LIFT W/GRAVITY ROLLS, 16’
POWERED INFEED ROLLCASE W/(10) 6-1/2”X24” ROLLS, BALDOR ADJUSTABLE
SPEED DRIVE, 6’ 7-STRAND C55D LUMBER LANDING TABLE W/HYDRAULIC DRIVE
PANEL SAW
MID OREGON PS-50, 50” PANEL SAW, KEYED ARBOR W/50 HP/3524 RPM MOTOR,
POWERED FEED ROLLS, HOLD DOWNS, S/N: 23003, MID OREGON 10’ HYDRAULIC
POWERED INFEED ROLLCASE W/(8) 4-1/2”X50” ROLLS, AMERICAN 3,000 LB.
5’X8’ SCISSOR LIFT TABLE, 4’X12’ INFEED GRAVITY ROLLS, FAC APPROX. 20 HP
HYDRAULIC UNIT, 1500 PSI, 20 GPM, 100 GALLONS
TRIMMERS & LUG LOADERS
CUSTOM BUILT 18’ CUT, 18’ PASS ADJUSTABLE 8-SAW TRIMMER W/(2) 18” 3500 RPM
SAWS & (6) 14” 1725 RPM SAWS, 8’ 14-STRAND 81X FEED THRU TRANSFER
W/GEARHEAD MOTOR
MID OREGON 8’ PRECISION END TRIMMER W/MOVABLE 3RD SAW, 10’ 4-STRAND
FEED THROUGH TRANSFER W/HYDRAULIC DRIVE, S/N: 23002
CUSTOM BUILT 48” 3-SAW PANEL SAW, ARBOR & FEED ROLL DRIVES, HOLDDOWNS
5’ 6-STRAND 5-ARM 16’ LUG LOADER
5’ 5-STRAND 5-ARM 10’ LUG LOADER
R.F. PRESSES
ROSENQUIST EB1650HD 4’X16’ R.F. PRESS W/40 KW GENERATOR, MID OREGON
HYDRAULIC DRIVEN DUAL FEED WHEEL TABLE W/GLUE APP. STATION,
6’ 9-STRAND POLY CHAIN INFEED TRANSFER TO PANEL ASSEMBLY TABLE
W/MOTORIZED PANEL FEEDER, 20 HP HYDRAULIC UNIT, 17’ OUTFEED GRAVITY
ROLLS TO CUSTOM BUILT HYDRAULIC OPERATED PANEL TURNER W/20 HP
HYDRAULIC UNIT, SPARE BULB & BOTTOM PLATE, S/N: 399-1554HD
ROSENQUIST EB-900H 4’X8’ R.F. PRESS W/40 KW GENERATOR,
IN & OUT TABLES, SPARE BULBS, S/N: 69086522
MOULDERS
MATTISON 229, 5-HEAD MOULDER W/10 HP TOP, 5 HP SIDE, 5 HP SIDE, 10 HP TOP &
10 HP BOTTOM HEAD, S/N: 10343
MATTISON 226, 5-HEAD MOULDER W/25 HP TOP, 7.5 HP SIDE, 7.5 HP SIDE,
25 HP TOP & 25 HP BOTTOM HEAD, S/N: 11001
FINGER JOINTER
FINGER JOINTER SYSTEMS/WYNOT FINGER JOINTER LINE W/48”X12’ BLOCK DUMP
CONVEYOR W/GEARHEAD, 24”X10’ BLOCK CONVEYOR W/GEARHEAD, 36”X18’
BLOCK CONVEYOR W/GEARHEAD, (2) FINGER JOINT STATIONS W/15 HP, 5HP
& 2 HP MOTORS, S/N: 815-8FJSD6 W/FEED THRU BELTS, 60” EVEN END BELT,
GLUE APP STATION, DECLINE BELT TO MANUAL CORNER, CROWDER STATION
TO FLYING CUT OFF SAW, 18’ PAYOUT TABLE W/7.5 HP DEFECT SAW, LANCER
MODEL GPD 502 DRIVES, CONTROLS, ELECTRICS, SPARE HEADS
RESAWS
TURNER 52” VERTICAL BAND TILTING RESAW W/50 HP MOTOR, HYDRAULIC DRIVEN
FEED ROLLS, GUIDE DRESSER, SHOP #E782
MCDONOUGH 54” VERTICAL BANDSAW W/60 HP MOTOR, HYDRAULIC DRIVEN FEED
ROLLS, 5 HP HYDRAULIC UNIT, S/N: 5407
BANDER
SIGNODE M22LP-44 BANDING STATION W/MHT 80 HEAD, TOP & SIDE SQUEEZE,
S/N: T4035 (NOT INSTALLED)
HOG
WILLIAMS APPROX. 30”X30” HAMMER HOG W/TECO 75 HP MOTOR, S/N: 15906
SANDERS
CEMCO 6000 SERIES, 52” 2-STATION KNIFE PLANER MODEL UPPR-6352,
S/N: CU-123, SANDER MODEL LPPR6352, S/N: CU-124, 1ST SECTION 40 HP/3540
RPM KNIFE PLANER, (2) 50 HP TOP SANDING BELTS W/AUTO TRACKING, 52”X13’
FEED THRU BELT W/SEW EURODRIVE GEARHEAD MOTOR, 52”X6” TRANSFER
BELT TO 52”X11-1/2’ FEED THRU BELT & ROLLS W/40 HP/3540 RPM DRIVE,
(2) 50 HP BOTTOM SANDING BELTS W/AUTO TRACKING, MID OREGON 10’
POWERED INFEED ROLLCASE W/(8) 4-1/2”X50” ROLLS HYDRAULIC DRIVE,
6’ 7-STRAND C55D LUMBER LANDING TABLE W/GEARHEAD MOTOR, 48”X22’
PORTABLE BELT TRANSFER W/GEARHEAD MOTOR, CONTROLS & ELECTRICS,
SPARE CONVEYOR & SANDING BELTS, FEED ROLLS
TIME SAVER 137, 3 HP, 75-37” TOP HEAD BELT SANDER W/20 HP MOTOR,
S/N: 21741M
CNC ROUTER
1997 KOMO VR804ST CNC ROUTER, DUAL SPINDLES W/(1) 8-TOOL CHANGER,
5’X8’ TABLE, QUINCY QSV25ANNIF ROTARY SCREW VACUUM SYSTEM,
ANVERS MODEL T050130 500 LB. CAPACITY VACUUM PLATE W/VACUUM PUMP,
GORBEL 500 LB. 13’H X 20’W X 20’L VACUUM CRANE, GE FANUC SERIES O-M
CONTROLLER, 7962 HRS, S/N: 19167967, SPARE SPINDLE DRIVE MOTOR &
QUINCY ROTARY SCREW VACUUM SYSTEM
OPTIMIZED SAW
DIMTER OPTICUT 304L CHOP SAW SYSTEM, S/N: 106677 W/GRECON MODEL 762
MEASURING STATION, S/N: 091870185107, 10”X45’ INFEED & 10”X65’ OUTFEED
BELTS, SEW EURODRIVE 2 HP/139 RPM GEARHEAD MOTOR, (9) AIR OPERATED
KICKERS TO SLIDE SORT BINS, CONTROLS & ELECTRICS
PRIMARY FILTER-DUST COLLECTORS-GRECON SYSTEM
CLARKES PNEU-AIRE PRIMARY FILTER MODEL 57-20 W/(57) 11-1/2”, 16” & 22” BAGS,
2003 NYB ACF/PLE CLASS IV CW FAN, APPROX. 38,000 CFM W/BALDOR 200
HP/1780 RPM MOTOR, CLARKES MODEL 035CCW PURGE FAN W/TOSHIBA 30
HP/1730 RPM MOTOR, PURGE MANIFOLD, CARTER DAY ROTARY AIR LOCK
W/DRIVE, 10” & 48” SPIRAL BLOWPIPE, SQUARE D MODEL 4 3-SECTION MCC
W/SIZE 5 STARTER
DUST COLLECTION SYSTEM W/BUFFALO SIZE 35, 20 HP FAN TO 6’ DIA. CYCLONE TO
30”X13’ COLLECTION HOOD W/(4) APPROX. 24”X120” BAGS W/BOTTOM ZIPPERS
APPROX. 8’W X 12’H X 24’L DUST COLLECTION BIN W/BOTTOM SLIDE GATES,
APPROX. 10’ CYCLONE W/APPROX. 30” DIA. BLOWPIPE TO APPROX. 60” FAN
W/TECO 150 HP MOTOR
GRECON 2-ZONE SPARK EXTINGUISHING SYSTEM W/PRESSURIZED TANKS, PUMPS
& 500 GALLON POLY TANK
(10) BLOWERS TO 60”
COMPRESSORS-DRYERS-AIR RECEIVER
SULLIVAN PALATEK PA50UDN ROTARY SCREW COMPRESSOR, 50 HP MOTOR,
UPDRAFT COOLER, IN-LINE FILTRATION, S/N: 04D027
SULLAIR 25L-150-150 ROTARY SCREW COMPRESSOR, 150 HP MOTOR, 250 PSI,
S/N: 47832-1G1, SQUARE D SIZE 5 STARTER
SULLIVAN PALATEK PA-PHD260 PRESSURE SWING DESICCANT TYPE AIR DRYER,
260 SCFM @ 100 PSIG
SULLAIR PAR600 TWIN TOWER DESICCANT DRYER, S/N: 003-D1700
30”X72” AIR RECEIVER TANK
For more information go to murphyauction.com • Phone 425.486.1246
AUCTION STARTS AT 10AM
SCISSOR LIFTS
8,000 LB., 60”X96” SCISSOR LIFT W/GRAVITY ROLLS
AMERICAN 3,000 LB., 60”X96” SCISSOR LIFT
(10) SCISSOR LIFTS
SHRINK WRAP MACHINES
2006 EASTEY MODEL ET4812 SHRINK WRAP OVEN, 220V, S/N: 0294812TL, 36”X42”
PRODUCT BELT W/L-BAR HOT KNIFE SEALER, 42”X55” LAY UP TABLE
W/3-STATION POWERED ROLL FEEDER
GRINDING & FILING ROOM
SIMONDS OPTIMATIC RO942 BANDSAW LEVELER, S/N: 05-942-45
ARMSTRONG #4 RH BANDSAW SHARPENER W/STRONG ARM, S/N: 13243
ARMSTRONG SIDE PRO DUAL SIDE GRINDER, S/N: 20424
JACOBSEN JM3000 DUAL SIDE GRINDER, S/N: 3013
WEINIG 920 PROFILE GRINDER/HEAD CUTTER
JET JCG450-3 UNIVERSAL TOOL & GRINDER CUTTER
HANCHETT 38LG TRAVEL BED GRINDER
MATTISON 222 MOTORIZED SET-UP STAND
WRIGHT W350 DUAL AUTO SIDE GRINDER SUPER HD
SYSTIMATIC SIDE & TOP GRINDER, S/N: 72-098
ACME JUNIOR BSA900 CIRCLE SAW SHARPENER, S/N: 10029
4”X14” & 1”X18” CIRCLE SAW ANVILS, (2) WANNER HYDROLOCK GUNS, WISSOTA
10” DOUBLE END PATTERN GRINDER, LARGE QUANTITY OF ROUND SAWS
MISCELLANEOUS SHOP & MILL EQUIPMENT
ENERPAC HOSE PRESS & FITTINGS, 9’ A-FRAME W/ 1/2-TON TROLLEY, 8’ A-FRAME,
DAYTON 1/2-TON ELECTRIC CHAIN HOIST, WESTWARD MODEL 5ML74 3/4-TON,
H.D. WHEEL DOLLY, WESTWARD MODEL 32C714 2-TON ENGINE HOIST, 10-TON
FLOOR JACK, MILLER MODEL CP250TS WIRE FEED WELDER W/SPOOL GUN,
(2) MILLER MODEL 250 TWIN WELDERS, HYPERTHERM POWER MAX & MORE!
ROLLING STOCK
CAT 950 ARTICULATED WHEEL LOADER W/8’ BUCKET, S/N: 9A3965-1485
HYSTER H-200HS 20,000 LB FORKLIFT, S/N: C007D02632G
HYSTER H-165H 16,500 LB FORKLIFT, S/N: C007P03941-B
HYSTER S-80XM-BCS 8,000 LB FORKLIFT, S/N: F004Y03810C
GENIE Z-30/20 ELECTRIC MAN LIFT, PNEUMATIC TIRES, 500 LB CAPACITY
1995 GMC TOP KICK 16’ FLATBED TRUCK, V8, PROPANE, 5-SPEED TRANS.
2002 NISSAN XE 2WD PICKUP, 5-SPEED TRANSMISSION, 6’ BED, 63,635 MILES,
1974 FORD 8000 TANDEM AXLE TRACTOR W/14’ STEEL FLATBED, FORD DIESEL
ENGINE, SPLIT SHIFT TRANSMISSION, LARGE DUMP BOX, 126,123 MILES
ADVANCED FLOOR MACHINE R5680 SWEEPER, FORD 4-CYLINDER GAS ENGINE
(REBUILT), 7182 HRS, S/N: 490112
TERMS AND CONDITIONS
X LOTS TO BE SOLD AT 1PM
AN ON-SITE BUYERS PREMIUM OF 10% WILL BE CHARGED ON ALL SUCCESSFUL
BIDS.
ELECTRICAL
WESTINGHOUSE 4-SECTION X 2500 AMP MAIN W/(17) SWITCHES
AN ONLINE BUYERS PREMIUM OF 13% WILL BE CHARGED ON ALL SUCCESSFUL
SQUARE D MODEL 4 3-SECTION MCC W/(3) SWITCHES & SIZE 5 STARTER
BIDS.
ALLEN BRADLEY 2-SECTION MCC W/(10) SWITCHES
ALLEN BRADLEY 2-SECTION MCC W/(9) SWITCHES
PAYMENT: FULL PAYMENT MUST BE MADE BY THE CLOSE OF BUSINESS, AUCTION
ALLEN BRADLEY 1-SECTION MCC W/(4) SWITCHES
DAY. CASH, CASHIER’S CHECK, MASTER & VISA CARDS, WIRE TRANSFERS
ALLEN BRADLEY BULLETIN 2100, 1-SECTION MCC W/(5) SWITCHES
ONLY. PERSONAL OR COMPANY CHECKS ACCEPTED ONLY WITH BANK LETTER
(4) ALLEN BRADLEY 500 HP SMC DIALOG PLUS DRIVES
OF GUARANTEE. ABSENTEE BIDS ACCEPTED WITH 25% DEPOSIT
(2) ALLEN BRADLEY 300 HP SMC DIALOG PLUS DRIVES
ALLEN BRADLEY 300 HP POWER FLEX FREQUENCY DRIVE
(2) ALLEN BRADLEY 350 HP REDUCED VOLTAGE STARTERS IN CABINET
REMOVAL: NO PURCHASE MAY BE REMOVED DURING THE AUCTION UNLESS
(2) DANFOSS SOLID STATE REDUCED VOLTAGE STARTER
OTHERWISE ANNOUNCED BY THE AUCTIONEER. ITEMS MAY BE REMOVED 1
YASAKAWA V1000 VARIABLE FREQUENCY DRIVE, (3) BALDOR ADJUSTABLE SPEED
HOUR AFTER THE AUCTION OR BETWEEN 7AM & 5PM, JULY 23RD THROUGH
DRIVES, (2) LANCER MODEL GPD502 DRIVES, SAFTRONICS G-3 ADJUSTABLE
AUGUST 21ST. NO WEEKEND REMOVAL. ANNOUNCEMENTS MADE BY THE
FREQUENCY DRIVE, RELIANCE SP500 10 HP VARIABLE SPEED DRIVE, WOODS
AUCTIONEER AT THE TIME OF SALE TAKE PRECEDENCE OVER PRINTED
E-TRAC 1 HP AC INVERTER, (10±) TRANSFORMERS TO 63 KVA
MATTER.
GREEN CHAIN-TRANSFERS-CONVEYORS-ROLLCASES
ASSORTED TRANSFERS TO 140’
ASSORTED CONVEYORS TO 275’
ASSORTED ROLLCASES TO 28’
MACHINE SHOP & MISCELLANEOUS MILL EQUIPMENT
GRIZZLY G4029 TURRET MILLING MACHINE, 3 HP HEAD, 75-3800 RPM, POWER
TRAVEL, 10”X49” T-SLOT TABLE W/POWER TRAVEL, S/N: 822807
ELLIS 1500 MITRE BANDSAW, 7” ROUND @ 45°, 10” ROUND @ 90°, 11” FLAT @ 90°
GRIZZLY 52” X 16 GA. MILD STEEL PRECISION FOOT SHEAR
50” FINGER BRAKE
20-TON HYDRAULIC SHOP PRESS
JET JTAS-10-3 TILTING ARBOR TABLE SAW, S/N: 508176
4’X8’ PANEL SAW W/MILWAUKEE 8-1/2” SAW
WARRANTY DISCLAIMER: ALL SALES ARE FINAL. ALL ITEMS ARE BEING SOLD
AS IS, WHERE IS, WITH ALL FAULTS AND WITHOUT ANY WARRANTIES AS
TO MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. THE
PRINCIPAL, THE AUCTIONEER, THE ADVERTISING COORDINATOR, AND ANY
OF THEIR AGENTS MAKE NO EXPRESS OR IMPLIED WARRANTIES OF ANY
TYPE. AUCTIONEER RESERVES THE RIGHT TO SELL ACCESSORIES, PARTS OR
ATTACHMENTS ON A SEPARATE AND/OR AGGREGATE BASIS
DRIVERS DIRECTIONS
FROM EAST OR WEST I-84 TAKE EXIT 44 AND HEAD NORTH ON S MERIDIAN ROAD.
KEEP RIGHT ON TO S MAIN ST (A ONE-WAY ROAD). FOLLOW S MAIN ST FOR
APPROXAMATLY SIX BLOCKS AND TURN LEFT ON TO E ADA ST. GO ONE BLOCK
AND TURN LEFT ON N MERIDIAN RD. GO ONE BLOCK AND TURN RIGHT ON TO
W TAYLOR AVENUE. AUCTION IS ON THE RIGHT. WATCH FOR AUCTION SIGNS.
For more information go to murphyauction.com • Phone 425.486.1246
James G. Murphy Co.
Commercial & Industrial Auctioneers
P.O. Box 82160, Kenmore, WA 98028
PRESORTED
FIRST CLASS MAIL
U.S. POSTAGE
PAID
SEATTLE, WA
PERMIT NO. 963
CAT 950
Bid live or bid online
with MurphyLIVE!
For more information go to murphyauction.com • Phone 425.486.1246
NO MINIMUMS / NO RESERVES
James G. Murphy Co.
1995 GMC TOP KICK
Commercial & Industrial Auctioneers
PUBLIC AUCTION
Closing Facility
THE FORMER PLUM CREEK
MERIDIAN REMAN PLANT
Reman Plant & Rolling Stock
9AM - WEDNESDAY - JULY 22
Preview 8-4pm, Tuesday, July 21
240 W. Taylor Avenue
Meridian, ID 83642
REAL ESTATE AVAILABLE
FOR PURCHASE
CONTACT:
RICK SCRUTON 208.472.2851
Bid live or bid online with MurphyLIVE!
For more information go to murphyauction.com • Phone 425.486.1246