docTDS – Nyogel 756G
download 
Report Transcription
NYOGEL 756G Electrically Conductive, Rust Inhibited A silica thickened, light viscosity, synthetic hydrocarbon grease intended for electrically conductive, instrument and bearing applications. Lubricant Properties Recommended Service Range (°C) Thickener Type Base Oil Kinematic Viscosity (Synthetic 181) Viscosity Index Flash Point Pour Point 100°C 40°C -40°C °C °C Typical Properties of the Grease Color, Appearance Penetration (1/10 mm) Unworked Worked Evaporation Test Method -40 to 125 Carbon Polyalphaolefin 9.5 cSt 60.7 cSt 25300 cSt 131 241 -57 ASTM D-445 ASTM D-445 ASTM D-445 ASTM D-2270 ASTM D-92 ASTM D-97 Typical Value Test Method Black 279 286 ASTM D-217 ASTM D-217 60 X NLGI Grade Density Oil Separation Typical Value 24 hour(s) 25°C 100°C 2 0.84 g/cm³ 1.7 % 24 hour(s) 100°C 0.1 % ASTM D-217 NYE CTM FTM 791, Method 321.2 NYE CTM The typical properties shown on this product data sheet should not be used as a basis for preparing specifications. Refer to our product Material Safety Data Sheet for detailed safety information. (1003) Distributed By Newgate Simms Limited Broughton Mills Road, Bretton, Chester, CH4 0BY, United Kingdom Ph: +44(0)1244 660771 Fx: +44(0)1244 661220 www.newgatesimms.co.uk [email protected] Nye Lubricants, Inc. 12 Howland Road, Fairhaven, MA 02719 USA Ph: 1.508.996.6721 Fx: 1.508.997.5285 nyelubricants.com The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, and is not to be considered a warranty or quality specification.
Similar documents
Willseal 600 ASTM E-84
Description willseal 600 is a precompressed, selfexpandinq polyurethone foam joint sealant that is designed to seal against rain, wind, sound, draft and dust. Unlike other conventional meth ods, willseal 600 is not susceptible to breakdowns caused by excessive joint movements, joint strain, surface contamination, aging and general tensile stress-caused failures. It does not dry out, shrink or deteriorate. There's no mixing, no masking, no staining and no mess, willseal 600 can be installed under many weather and temperatureconditions.
Material Open cell polyurethone flexible foam impregnated with a flame retardant modified acrylic. Supplied precom pressed with PSA on one side.
Tested Physical Properties illbruck willseal 600
Property Test Method Value Color Black/Grey Density ASTM D 3574 5.5-6.5 Ib/ft3l90-110kg/m3) ThermalConductivity ASTMC518 0.28 - 0.30 Btu-in/hr.=F-ft2 Thermal Resistance ASTM C 518 3.3 - 3.6 hr-^F-flVBtu Tensile Strength ASTM D 3574 21 psi min. TemperotureStability Range Short Term LongTerm -40°C/-40°F to 120°C/248°F - 40°C/-40°F to 90°C/194"F Elongation ASTM D 3574 120%+/-20% Compression Set ASTM D 3574 4.2% max. Staining and Bleeding DIN 18 542 Meets DIN requirements Resistonce to UV and Moisture DIN 18542 Meets DIN requirements Shelf Life 2 years Water Resistance ASTM E 331 12 psf ASTM E 547 12psf Fire Testing ASTM E 84' Flame Spread;0, Smoke Developed: 5 Compatibility with conven tional construction materials DIN 52423 Nosigns ofcorrosion wereobservedon zinc, steel,galvanizedsteel,aluminium and copper; no odverse effects with concrete, aerated con crete, brick,some natural stone, PVC,Plexiglos ond wood; for other materials consultillbruck Ideal Storage Temperature 34 °F-68°F Performance Guorantee 10 year worronty^ on performance
