docleParslen ZH520J Parslen ZB332C is suitable for food contact
download 
Report Transcription
leParslen ZH520J Parslen ZH520J Is a Modified Homopolymer Designed for the Very High Speed Production of Coextruded BOPP Films Product Description Parslen ZH520J has been developed for coextrusion lines with a very high output and linear speed. The product allows an outstanding extrusion stability and thickness variation control, especially on cascade lines the product provides also a very high drawability and readiness to a two way orientation. BOPP films produced with Parslen ZH520J feature good mechanical properties,high impact strength and puncture resistance,even at low temperatures.The films form an excellent barrier against moisture, odours, oils, fats and oxidation and feature high transparency,high gloss and good printability after corona treatment. Application Coextruded film with a thickness of 20 to 40m is used for the automatic packaging of bakery products, snacks and pasta as well as for the overwrapping of boxes and cigarette packets. Producer Navid Zar Chimi Petrochemical Company Properties Value Tolerance Units Test Method Melt now rate(230• c.2.16 Kg) 3.1 ±0.3 gr/10 min ASTM 01238 Vicat softening point ( 9.8 N) 156 -8 •c ASTM D 1525 H.O.T. (0.46 Mpa) 94 ±8 •c ASTM 0 648 Flexural modulus 1550 ±150 MPa ASTM D 790 Tensile strength at yield 35 ±4 MPa ASTM 0 638 Elongation at yield 12 -2 % ASTM D 638 IZod impact strength( notched ) at 23°C 55 ±5 Jm ASTM 0256 Rockwellhardness [R - B Scale) 102 ±15 R-B ASTM 0 785 a) Values shown are averages and are not to be considered as exact product specifica tions. b) All spec imens are prepared by i njection molding. Parslen ZB332C is suitable for food contact
Similar documents
Willseal 600 ASTM E-84
Description willseal 600 is a precompressed, selfexpandinq polyurethone foam joint sealant that is designed to seal against rain, wind, sound, draft and dust. Unlike other conventional meth ods, willseal 600 is not susceptible to breakdowns caused by excessive joint movements, joint strain, surface contamination, aging and general tensile stress-caused failures. It does not dry out, shrink or deteriorate. There's no mixing, no masking, no staining and no mess, willseal 600 can be installed under many weather and temperatureconditions.
Material Open cell polyurethone flexible foam impregnated with a flame retardant modified acrylic. Supplied precom pressed with PSA on one side.
Tested Physical Properties illbruck willseal 600
Property Test Method Value Color Black/Grey Density ASTM D 3574 5.5-6.5 Ib/ft3l90-110kg/m3) ThermalConductivity ASTMC518 0.28 - 0.30 Btu-in/hr.=F-ft2 Thermal Resistance ASTM C 518 3.3 - 3.6 hr-^F-flVBtu Tensile Strength ASTM D 3574 21 psi min. TemperotureStability Range Short Term LongTerm -40°C/-40°F to 120°C/248°F - 40°C/-40°F to 90°C/194"F Elongation ASTM D 3574 120%+/-20% Compression Set ASTM D 3574 4.2% max. Staining and Bleeding DIN 18 542 Meets DIN requirements Resistonce to UV and Moisture DIN 18542 Meets DIN requirements Shelf Life 2 years Water Resistance ASTM E 331 12 psf ASTM E 547 12psf Fire Testing ASTM E 84' Flame Spread;0, Smoke Developed: 5 Compatibility with conven tional construction materials DIN 52423 Nosigns ofcorrosion wereobservedon zinc, steel,galvanizedsteel,aluminium and copper; no odverse effects with concrete, aerated con crete, brick,some natural stone, PVC,Plexiglos ond wood; for other materials consultillbruck Ideal Storage Temperature 34 °F-68°F Performance Guorantee 10 year worronty^ on performance