- Al Asayel Health and Safety

Transcription

Al Asayel
Product Catalogue
Personal
Protective
Equipment
AL ASAYEL PRODUCT CATALOGUE
TABLE OF CONTENTS
Introduction
1
Coveralls 2 INTRODUCTION
Al Asayel is a one-stop-shop for protective equipment and
apparel requirements for any workforce. Our product portfolio
Pants and Shirts 10 includes the most recognized brands in the industry, allowing
Knee Pads
20 flexibility and choice for the customer. Working closely with
Lab Coats 23 the customer, we offer a wide range of bespoke product and
Winter Garments 26 service solutions designed to meet the requirements of any
Welding Garments 33 High Visibility Garments
39
Rain Wear 45 programmes combining Health & Safety as well as Corporate
Disposable Wear 52 Image and Employee Comfort - improving performance and
Foot Wear 60 corporate identity.
Safety Glasses 70 Head Protection
80
Heat Stress Prevention
85
eliminating the need for multiple suppliers and costs
Hearing Protection
90
associated with fragmented supply chains.
Respiratory Protection
95
industry.
- We assist our customers in implementing comprehensive
-We provide this service in a fully integrated one-stop-shop
environment for all workwear and PPE requirements-
- We provide a “from stock to service” for all key customers,
Hand Protection
100
Harnesses and Lanyards
137
Fire Safety
143
First Aid
148
Gas Detection
152
platform - creating cross border benefits for our customers
Cabinets
158
in an increasingly international business environment.
AIRE Snap Berm
161
Size Chart 164
Measuring Guidelines 165
including man-pack shipment to indivifual users- cutting
issue and management costs for the customer.
-We do it all from the best developed multinational supply
-We provide integrated technology solutions to streamline
supply transactions - driving out costs from business
process.
COVERALL
FLAME RETARDANTS
COVERALL
WALLS DELUX CFR COVERALL
KEY FEATURES
•
•
•
•
•
•
•
•
•
•
•
Flame-Resistant
Two-Way Front Zipper w/Snap-Over Fly
Ruler Pocket - Right Leg
Left Chest Pocket w/Concealed Snap Closure
Banded Waist w/Elastic Inserts
One Hip Pocket-Right Hip w/Concealed Snap Closure
Sleeve Hem w/Adjustable Concealed Snap Closure
Single Needle Leg Hem
Snap Closure at Top of Zipper & Top of Fly
Bi-Swing Action Back
Swing Pockets w/Side Entry
Standard for Safety
• Meet ASTM F1506
• OSHA Final Rule 1910.269
• NFPA 70E U.S. Safety standards
• EN531 Standard
• UL Certified for NFPA 2112
• Banox certified
Color
Fabric quality: 9 oz. 100% FR Cotton Twill
Coverall
Protection: ARC Rating, ATPV - 10.9 cal/cm²; HRC Level 2
Manufacturer: Walls
Part Number: ASA WDC
WALLS FR COVERALL
CONSTRUCTION
• Flame-Resistant
• Two-Way Front Zipper w/ Snap-Over Fly
• Ruler Pocket - Right Leg
• Banded Waist w/ Elastic Inserts
• True Bi-Swing Action Back for Ease of Movement
• Swing Pockets w/ Side Entry
• Chest Pockets w/ Zipper Closures
• Rear Pockets w/One Zippered & One Snap Closure
• Cuff Closure on Sleeve w/ Adjustable Snap Closure
Color
Fabric: 7 oz.
Quality: 88% Cotton / 12% High Tenacity Flame Resistant
Banwear
Standard for Safety: UL Certified for NFPA 2112, Meets
Standards for Flame Resistant Fabrics - ASTM F1506,
NFPA 70E
Protection: Arc Rating, ATPV - 9.6 cal/cm²; HRC Level 2
Manufacturer: Walls
Part Number: ASA WFR 7 oz
al asayel workwear & personal protective PROTECTIVE GEAR
3
COVERALL
COVERALL
DUPONT NOMEX COVERALLS
Garments of DuPont™ NOMEX® brand fiber offer the lightweight, comfortable
protection your workers are looking for. NOMEX® provides outstanding flame
resistance, but that’s not all.
FRONT
• Two front breast patch pockets – left pocket has safety flap with concealed
snap and pencil stall
• Two hip pockets
• Two-way breakaway brass zipper (concealed)
• Snap closure at top of zipper
• Extra-wide pass-through (with snaps) for easy access to clothing underneath
• Adjustable cuffs
• Re-enforced crotch
Color
BACK
• Action-back design for added flexibility and comfort
• Two elastic gatherings at waist
• Rear patch pockets re-enforced with double fabric to prevent premature wear
• Left pocket has concealed snap
• Reinforced rule pocket on right leg
Fabric Guide:
Light weight. Breathable. Inherently Flame-Resistant
DuPont Nomex IIIA (93% Nomex Aramid/5% Kevlar Aramid/2% Other Fiber)
garments are extremely durable, so they aren’t damaged by laundering.
Nomex IIIA apparel is preferred by workers in petrochemical and refinery
environments and makes a great choice for electric and gas utility workers.
Standard for Safety:
Certification: Meet ASTM F1506, OSHA Final Rule 1910.269, NFPA 70E U.S.
Safety standards. EN531 Standard.
Fabric:
Available in 4.5 OZ and 6.0 OZ
Protection: 4.5OZ – ARC Rating ATPV 4.8 calories/cm2 and 6OZ – ARC Rating
ATPV 5.7 calories/cm2
Quality:
Nomex IIIA or Nomex Comfort
Note:
1.) Custom colors available in a minimum quantity
2.) Available in 1” and 2” Reflective Stripes
Manufacturer:
Part Number:
Part Number:
DUPONT
ASA NCC 100 4.5 OZ
ASA NCC 100 6.0 OZ
AL ASAYEL DALE ANTI-FLAME
100% COTTON COVERALL
KEY FEATURES
Specification: Material- Dale Anti-flame 1023-weight 7.5 oz., with a
light weight fabric specially designed for wear in warmer conditions
and climates where flame retardant protection is required, this fabric
has been manufactured using the same pyrovatec treatment to
provide the same high levels of quality, safety and comfort. Tested
to EN531A, B1A, C1, this fabric is made from 240gm cotton and uses
the natural cool properties and comfort of 100% cotton while at the
same time protecting the wearer from the hazards of their particular
industries.
Construction: Triple stitching produce with three needle, banded
waist with elastic inserts, two way front zipper, two chest pockets,
two hip pockets with 2 inch Reflective on Arms and Legs, setin
sleeves, bi-swing action back, swing style pant pockets and all stress
point with barracks, side pocket with access to clothing, ruler pocket
and pencil pocket on sleeve.
Standard for Safety: EN531 Standard
Fabric: Available in 5.5 oz and 7.5 oz
Quality: 100% Cotton Dale Anti-Flame
Color: Navy Blue, Royal Blue, Khaki, Orange, Gray, Red and Green
Color
Note: Custom colors available in a minimum quantity. Available in 1”
and 2” Reflective Stripes. Custom embroidery available.
Manufacturer: AL ASAYEL
Part Number: ASA AAC 100 5.5 oz / ASA AAC 100 7.5 oz
WALLS FR STRIPED COVERALL
KEY FEATURES
• Two Way Front Zipper with Snap Over Fly
• Large Zippered Chest Pockets
• Pencil Pocket - Left Arm
• Two Back Pockets - Left has Concealed Zipper
• Silver FR Reflective Tape on Sleeves & Legs
• NFPA 70E HRC2 NFPA 2112
• Arc Rating ATPV 8.6 calories/cm2
• 7 oz. 88% cotton / 12% nylon
Manufacturer: WALLS
Part Number: ASA WFS
Color
4
5
COVERALL
COVERALL
NON-FLAME RETARDANTS
Walls Short Sleeve
Poplin Coverall
KEY FEATURES
• Medium Weight Cotton/Polyester Blend w/
Medium Weight Poplin
• Bi-Swing Action Back for Ease of Movement
• Banded Waist w/ Elastic Inserts
• Two-Way Front Zipper w/Snap-Over Fly
• Permanent Press Finish
• Two Bellows Chest Pockets
• Increased Sleeve Length for Updated Look
Color
• Two Back Pockets-Left Zippered
Manufacturer: WALLS
Part Number: ASA WSS
RED KAP CAP ZIP FRONT
COTTON COVERALL
Pocket: Two angled zipper chest pockets, two set-in
reinforced front slack pockets, rule pocket, and two
reinforced patch hip pockets with zippered closure on
left.
Blend: 100% Cotton
Other:
• Side vent openings for access to slack pockets
• Sized to be worn over clothes
• Felled outseams, safety stitched inseams
• Snap take-ups on leg bottoms
Color
Care: Industrial Wash
Closure: Concealed two-way, heavy-duty brass zipper
Collar: One-piece top stitched
Fabric: Available in 8.5 oz
Quality: 100% Cotton
Note: Custom colors available in a minimum quantity.
Available in 1” and 2” Reflective Stripes. Custom
embroidery available.
Manufacturer: RED KAP
Part Number: ASA RCC 100 8.5 oz
AL ASAYEL 100%
COTTON COVERALL
WALLS 100% COTTON COVERALL
Garments of DuPont™ NOMEX® brand fiber offer the lightweight, comfortable
protection your workers are looking for. NOMEX® provides outstanding flame
resistance, but that’s not all.
Fabric 100% cotton 220g/m2 5.5 oz twill coverall Triple
stitching produce with three needle, banded waist
with elastic inserts, two way front zipper, two chest
pockets, two hip pockets with Velcro closure, setin sleeves, bi-swing action back, swing style pant
pockets and all stress point with barracks, side pocket
with access to clothing, ruler pocket and pencil
pocket on sleeve.
Color
Fabric: Available in 5.5 oz and 7.5 oz
Part Number: ASA ACC 100 5.5 oz / ASA ACC 100 7.5 oz
FRONT
• Two front breast patch pockets – left pocket has safety flap with concealed
snap and pencil stall
• Two hip pockets
• Two-way breakaway brass zipper (concealed)
• Snap closure at top of zipper
• Extra-wide pass-through (with snaps) for easy access to clothing underneath
• Adjustable cuffs
• Re-enforced crotch
BACK
• Action-back design for added flexibility and comfort
• Two elastic gatherings at waist
• Rear patch pockets re-enforced with double fabric to prevent premature wear
• Left pocket has concealed snap
• Reinforced rule pocket on right leg
Fabric Guide:
DuPont Nomex IIIA (93% Nomex Aramid/5% Kevlar Aramid/2% Other Fiber)
garments are extremely durable, so they aren’t damaged by laundering.
Nomex IIIA apparel is preferred by workers in petrochemical and refinery
environments and makes a great choice for electric and gas utility workers.
Certification: Meet ASTM F1506, OSHA Final Rule 1910.269, NFPA 70E U.S.
Safety standards. EN531 Standard.
Fabric:
Available in 4.5 OZ and 6.0 OZ
Protection: 4.5OZ – ARC Rating ATPV 4.8 calories/cm2 and 6OZ – ARC Rating
ATPV 5.7 calories/cm2
Quality:
Nomex IIIA or Nomex Comfort
Note:
Manufacturer:
Part Number:
Part Number:
6
Color
DUPONT
ASA NCC 100 4.5 OZ
ASA NCC 100 6.0 OZ
7
COVERALL
COVERALL
WALLS TWILL INSULATED
COVERALLS
Color
Rugged Heavy Weight Blended Brushed Cotton Fabric Covered
Two-Way Nylon Coil Leg Zippers from Ankle to Waist Corduroy
Collar with Concealed Snaps for Optional Hood Reinforced
Front and Hip Pockets for Longer Wear Concealed Snaps on
Front Fly at Waist and Neck Adjustable Leg Hem Inside Storage
Pocket Located at Right Side Heavy Weight Fiberfill Insulation
Triple Needle Stitching for Strength and Durability Self Fabric
Front Fly Over Full Length Two-Way Front Zipper Double Knee
Patches for Reinforcement Articulated Elbows for more flexibility
Storm Cuffs for Warmth and Comfort Improved Inside Mesh Cell
Phone Pocket with Hook and Loop Closure and Storage Pocket
Concealed Hook and Loop Closure on Pockets and Leg Flys for
Smooth Shell exposure and Scratch Prevention
50MM Reflective “offshore” stripes. Side pockets with access
to clothing. Back pockets, rule pocket. Elasticated waist in the
back, action back, Concealed two way metal zip front. Chest
pockets with flap and Velcro.
Standard for Safety: EN531 Standard
Fabric: Available in 6 oz
Quality: Insulated
Note:
2.) Available in 1» and 2» Reflective Stripes
Manufacturer: WALLS
Part Number: ASA WIC 102 oz
WALLS STRIPED COVERALL
KEY FEATURES
• 100% Cotton Twill Shell
• Two Way Front Zipper with Snap Over Fly
• Large Zippered Chest Pockets
• Pencil Pocket - Left Arm
• Two Back Pockets - Left has Concealed Zipper
• Reflective Tape on Sleeves & Legs
Manufacturer: WALLS
Color
Part Number: ASA WSC
WALLS POLYESTER COTTON
TWILL COVERALL
KEY FEATURES
• 55% Cotton /45% Polyester Blend
• Two Front Swing Pockets w/Side Entry
• Two Back Pockets-Left Zippered
• Ruler Pocket
• Two-Way Front Zipper w/Snap-Over Fly
• Bi-Swing Action Back for Ease of Motion
• Banded Waist w/Elastic Inserts
• Two Zippered Chest Pockets
• Pencil Pocket on Left Sleeve
• Long Sleeve
• Triple Needle Stitching for Strength & Durability
Manufacturer: WALLS
Part Number: ASA WPC
Color
8
9
COVERALL
COVERALL
INSULATED
WALLS INSULATED DUCK
COVERALL W/RS
KEY FEATURES
• Insulated
• Reflective Striping
• Custom embroidery available.
Manufacturer: WALLS
Part Number: ASA WID
Color
WALLS INSULATED
WAIST-ZIP COVERALL
KEY FEATURES
• Medium Weight 100% Cotton Duck w/Durable Water
Resistant Finish
• Medium Weight Fiberfill Insulation
• Corduroy Collar w/Concealed Snaps for Optional
Hood
• Bi-Swing Action Back for More Flexibility
• Adjustable Leg Hem & Take-Up Snaps for Better Fit
• Double Knee Patches for Reinforcement
• Elastic Inserts at Back Waist
• Ankle to Hip Leg Zipper w/Unique Separate Pass
Through Construction
• Scuff Guards on Legs
• Inside Mesh Cell Phone Pocket w/Hook n’ Loop
Closure & Storage Pocket
• Ruler & Pliers Pocket on Right Leg
• Cell Phone Pocket on Left Leg
• Pleated Elbows for Ease of Motion
• Additional Inside Storage Pocket Located at Right
Side
Color
Manufacturer: WALLS
Part Number: ASA WIW
10
12
PANTS & SHIRTS
FLAME RETARDANTS
PANTS & SHIRTS
DUPONT NOMEX SHIRTS
Features:
• Banded, topstitched collar
• Topstitched cuffs w/ adjustable button closures
• Pocket front w/ button closure
• Tailored sleeve placket
• Autoclaved
Protection: Arc Rating ATPV 5.7 calories/cm²
Fabric Guide
DuPont Nomex IIIA (93% Nomex Aramid/5% Kevlar Aramid/2%
Other Fiber) garments are extremely durable, so they aren’t
damaged by laundering. Nomex IIIA apparel is preferred by
workers in petrochemical and refinery environments and
makes a great choice for electric and gas utility workers.
Color
Standard for Safety
Certification: Meet ASTM F1506, OSHA Final Rule 1910.269,
NFPA 70E U.S. Safety standards. EN531 Standard.
Protection for 4.5 Oz.: Arc Rating ATPV 4.8 calories/cm²
Protection for 6.0 Oz.: Arc Rating ATPV 5.7 calories/cm²
Pants &
Shirts
Standard(s) for safety:
• NFPA 2112, Flame Resistant Garments of Industrial Personnel
against flash fire, 2001 Edition
• UL Certified
• This garment is acceptable under OSHA 29 CFR 1910.269
Fabric: Available in 4.5 OZ and 6.0 OZ
Quality: Nomex IIIA or Nomex Comfort
Note: 1.) Custom colors available in a minimum quantity
Manufacturer: DUPONT
Part Number: ASA ANS 100
DUPONT NOMEX PANTS
Features:
• Innerlined waistband w/ button closure
• Two slack style front pockets, two set in hip pockets, left hip
w/ button closure
• Permanent crease
• Autoclaved
Protection: Arc Rating ATPV 5.7 calories/cm²
Fabric Guide
DuPont Nomex IIIA (93% Nomex Aramid/5% Kevlar Aramid/2%
Other Fiber) garments are extremely durable, so they aren’t
damaged by laundering. Nomex IIIA apparel is preferred by
workers in petrochemical and refinery environments and
makes a great choice for electric and gas utility workers.
Color
Standard for Safety
Certification: Meet ASTM F1506, OSHA Final Rule 1910.269,
NFPA 70E U.S. Safety standards. EN531
Standard.
Protection for 4.5 oz.: Arc Rating ATPV 4.8 calories/cm²
Protection for 6.0 oz.: Arc Rating ATPV 5.7 calories/cm²
• NFPA 2112, Flame Resistant Garments of Industrial Personnel
against flash fire, 2001 Edition
• UL Certified
• This garment is acceptable under OSHA 29 CFR 1910.269
Quality: Nomex IIIA or Nomex Comfort
Part Number: ASA ANP 100
13
PANTS & SHIRTS
PANTS & SHIRTS
WALLS FLAME RESISTANT
HIGHT END PANT
KEY FEATURES
• Classic Fit
• Fire Retardant Twill Shell
• Two Front Swing Pockets
• Button Closure at Waist Band
• Two Back Welt Pockets w/Button Closure
Pocket:
• Two button-thru flapped pockets
• Bar tacked pencil stall in left pocket
Facing: stitched-down front
Protection: ARC Rating, ATPV - 12.7 cal/cm²; HRC
Level 2
Blend: 65% Polyester / 35% Cotton
Finish: Soil release
• Meet ASTM F1506
• EN531 Standard
Color
RED KAP SHIRTS
Other: Double yoke back Long tail
Care: Home wash
Closure: Seven buttons
Fabric: 5.5 oz No-Iron Twill
Fabric: 9 oz. 88% Cotton / 12% High Tenacity Flame
Resistant Banwear
Type: Short Sleeves and Long Sleeves
Care: Machine Wash Warm with like colors. Do not
bleach, starch or use fabric softener or use products
containing hydrogen peroxide. Tumble dry medium
and medium iron. Failure to launder properly could
affect the flame resistance.
Manufacturer: WALLS
Part Number: ASA WFP
Note: Custom colors available in a minimum quantity
Part Number: ASA ST62 SS (Short Sleeves)
Part Number: ASA ST62 LS (Long Sleeves)
Part Number: ASA ST62
COTTON CARGO PANTS
There’s room for everything in six pockets. 100%
cotton is wonderfully wrinkle-resistant.
• Two pleated cargo pockets with flaps
• Back Patch pockets with button-down flaps 8oz.
Color
Collar: Topstitched, lined, sewn-in-stays
RED KAP PANTS
Pocket: Two slack style front pockets, two set-in welted
hip pockets
Waistband: Tubular waistband with adjustment outlet
100% Wrinkle-Resistant Cotton Twill
Other: Full cut, straight leg styling Darts over hip pockets
Fabric: 8.5 oz 100% Pre-Shrunk Cotton Twill
Matches ST52 and ST62 twill shirts in all colors.
Note: 1.) Custom colors available in a minimum
Bar tacks at stress points
quantity
Finish: Soil release
Part Number: ASA PC56
Closure: Hook and Eye closure, brass ratcheting zipper
Care: Home wash
Color
Fabric: 8.5 oz No-Iron Twill
Color
Part Number: ASA PT62
14
15
PANTS & SHIRTS
PANTS & SHIRTS
WALLS TRADITIONAL DENIM
WELDING SHIRT
WALLS FLAME RESISTANT HIGH
END SHIRT
KEY FEATURES
Denim, the great American fabric, shows off its workday
style with this Western take on utility. 9.5-oz. 100%
cotton denim with triple-needle stitching for strength
and durability. Western yokes front and back. Snap front
and cuff closure. Two chest pockets with snap flaps.
Pencil slot in left chest pocket. Machine wash. Imported.
KEY FEATURES
• 100% Cotton
• Western Yoke Front & Back
• Snap Front & Cuff Closure
• Two Chest Pockets w/ Flaps
Color
Fabric:
• 5.5 oz. 100% Cotton Chambray
• 7 oz. 88% Cotton/12% Nylon
• BANOX CERTIFIED
• Meet ASTM F1506
• EN531 Standard.
• Double Needle Stitching on Front Placket & Flaps
Care: Machine Wash Warm with like colors. Do not bleach,
starch or use fabric softener or use products containing
hydrogen peroxide. Tumble dry medium and medium iron.
Failure to launder properly could affect the flame resistance.
Manufacturer: WALLS
• Pencil Slot Left Chest Pocket
Color
• Flame Resistant
• Button Down Collar w/ Single Needle Top Stitching
• Single Back Yoke
• Sewn on Front Placket w/ Double Needle Top Stitching
• Two Spade Chest Pockets w/ Button Flap Closure
• Double Needle Top Stitching on Pockets & Flaps
• Pencil Slot Left Chest Pocket Flap
• Adjustable Button Closure at Cuff
Part Number: ASA WTS
WALLS HEAVY WELDING SHIRT
Manufacturer: WALLS
Part Number: ASA WES
RED KAP 100% COTTON UNIFORM
SHIRT SC30
The softness of cotton teams up with great style details.
KEY FEATURES
• Seven-button front including button at neck
• HVY LNG SLV SHIRT KHAKI
• Two-piece collar with sewn-in stays
• 10oz 100% Cotton Twill L/S Shirt
• Two button-thru hex pockets with left pencil stall
• 2 Spade Chest Pockets w/ Flaps & Closures
• Walls/Barb Wire Embroidery on Back Yoke
• Snap Front Closure
• Pencil Slot in Left Pocket Flap
• Western Front & Back Yokes
Color
• Easy-care finish 6oz. 100% Wrinkle-Resistant Cotton
• Convertible collar with stays
• Pockets with pencil stall
• 100% wrinkle resistant cotton twill
Fabric: 6.0 oz 100% Cotton
Type: Solid Long Sleeves and Stripes Long Sleeves
Manufacturer: WALLS
Custom embroidery available.
Part Number: ASA WHS
Part Number: ASA SC30 Solid / ASA SC30 Stripes
Color
16
17
PANTS & SHIRTS
PANTS & SHIRTS
ROSKILDE SET
POLO SHIRT SK30
KEY FEATURES
• Superior color retention keeps the shirt looking new
• Soil release ensures a clean look after every wash
• Moisture management keeps the wearer dry and
comforable
• No-curl collar for a crisp look all day long
• Taped collar seam and reinforced shoulder seams
for added durability
• Three-button clean finish placket with tortoise shell
buttons
Fabric: 5.4 oz
Pocket: One hemmed, spade-style
Blend: 100% Soft Hand Performance Polyester
Color
Other:
• Rib knit sleeve with matching collar
• Superior color retention
• Hydrophilic Moisture Management System
Finish: Soil release with wickable finish
Closure:Three tortoise shell button front, lined placket
Collar: Rib knit collar with contrast tipping
Part Number: ASA SK30
HIMMELBJERG SET
FEATURES:
• WARM. For work in cold conditions.
Keeps you dry and warm.
• Maximum Moisture Transport
• Quick Drying
• Soft
• Durable
• Naturally Anti Bacterial
• Insulating Merino Wool
• 57% Merino wool/ 43% Polypropylene 240g
• Lifa® Stay Dry Technology TM
• Extended back
MATERIALS:
• 57% Merino wool/ 43% Polypropylene 240g
• Lifa® Stay Dry Technology
Manufacturer: HELLY HANSEN
Part Number: 75626
ASHFORD KNEEPAD PANT
Reinforcements: 100% nylon Cordura®
FEATURES:
• 200g 48.5% wool/48.5 FR viscose/3% inox
• Marino woolSoft yet durable
• Moisture transporting
• Antibacterial
• Thermal properties
• EN 1149 compliant, providing protection against
electrostatic discharge designed to eliminate spark
discharges from the human body
• EN ISO 14116:2008 compliant, providing protection
against heat and flame - limited flame spread
materials, material assemblies and clothing
• EN 531:1995 compliant
Part Number: 75067/75467
• 2 hanging front nail/screw/tool pockets in Cordura®
with angled corners and double bottoms with option
to insert into bellowed front pockets
• 2 bellowed front pockets
• Broad belt tunnel at back for extra strength and
stability
• Extra strength polyester IMS/click on™ loops at front
and sides for additional heavy tools
• Belt loops with reguar IMS/click on™ loops at the
back for additional tools
• Extra strong loops with double velcro closure on
both sides for hammer holders
• 2 bellowed back pockets, 1 with flap and velcro
closure
• Thigh pocket with flap space for carpenter’s pencil
and additional accessories/tools
• Ruler pocket with button for fastening knife with
and room for carpenter square; loose attachment at
bottom for added flexibility
• Kneepad pockets in Cordura® with 2 top opening
options rendering +/- 5cm difference and flexibility in
knee pad positioning
• Gusset in crotch for better and additional freedom of
movement
Fabric 65% Polyester, 35%Cotton
Weight 275gms
Part Number: 76438
18
19
kneepads
kneepads
Economy Rubber Knee Pad
Size: One Size
Manufacturer: Occunomix
Part Number: 124
Detail:
Our most economical knee pad! This soft, lightweight
yet sturdy knee pad protects knee against the pressures
of kneeling on hard or rough surfaces. The one piece
molded impact resistant rubber pad with adjustable strap
keeps knee cushioned and dry against wet surfaces.
Knee Pads
Nubbly outer surface provides anti-slip benefits.
Sold in Pairs.
Hard Plastic Cap Knee Pad
Size: One Size
Part Number: 125
Detail:
Heavy duty protection against injuries often sustained
in rigorous working conditions as a result of constant
kneeling. These lightweight pads have hard caps made of
abrasion resistant plastic, forming an ergonomic bubble
of protection. The soft foam padding and adjustable
straps ensure hours of comfortable, productive work.
Hook and loop closures keep pad in place.
Sold in Pairs.
21
kneepads
kneepads
Plastic Cap Knee Pad w/
Buckle Closures
Size: One Size
Part Number: 125B
Detail:
Same as 125 with the addition of instant on/off buckle
closures. That means no hook and loop to snag on
carpet.
Sold in Pairs.
Polyethylene Knee
Protector Pads
Lab
Coats
Pants
&
Shirts
Size: One Size
Manufacturer: Helly Hansen
Part Number: 79561
Details:
• 100% molded polyethylene
• Flexible
• Knee protectors to be used with all relevant styles
22
LAB COATS
LAB COATS
Men’s Three Button Lapel/
Counter Coat
Fabric: 5 oz. Performance Blend Poplin
Pocket: Two lower outside pockets
Blend: 80% Polyester / 20% Combed Cotton
Other: • Square-hemmed front
• Back has princess seams on KP17
Finish: Pre-cure durable press
Collar: One-piece, lined, notched lapel
Nomex Lab Coat
Flame resistant, 6 oz NOMEX IIIA Home wash and Light
soil wash Button front closure Lapel collar Hemmed
sleeve ends Side vent Openings Arc
Rating ATPV 5.7 calories/cm2
Fabric Guide
DuPont Nomex IIIA (93% Nomex Aramid/5% Kevlar
Aramid/2% Other Fiber) garments are extremely
durable, so they aren’t damaged by laundering. Nomex
IIIA apparel is preferred by workers in petrochemical
and refinery environments and makes a great choice
for electric and gas utility workers.
Note: Custom colors available in a minimum quantity
Part Number: ASA KP10
Standard for Safety
Certification: Meet ASTM F1506, OSHA Final Rule
1910.269, NFPA 70E
U.S. Safety standards. EN531 Standard.
Part Number: ASA LC100
Color
Color
Lab Coat
Fabric: 5 oz. Performance Blend Poplin
Length: 37” (based on size medium - back)
Pocket: Two lower pockets, left breast pocket
Other: • Decorative belted back
• Darts at shoulder for shaping
• Princess seams in back
• No side vents
Finish: Pre-cure durable press
Closure: Five Buttons
Collar: One-piece, notched lapel
Part Number: ASA 5210
Color
24
25
WINTER GARMENTS
FLAME RETARDANTS WINTER GARMENTS
WALLS LIGHTWEIGHT FLAME
RESISTANT JACKET
KEY FEATURES
• Flame-Resistant
• Storm Fly Covered Zipper Front
• Inside Front Facings
• Zippered Left Chest Welt Pocket
• Left Inside Cell Pocket
• Two Lower Welt Pockets
• Bi-Swing Two Piece Action Back
•Two Piece Sleeve w/Pleat at Cuff & Adjustable
Button Closure
Fabric:
• 7 oz. 88% Cotton / 12% Nylon
• Banox Certified
• FR Twill Outer Shell BANWEAR
• 7 OZ. 100% Cotton Twill Lining
Winter
Garments
Color
Protection: ARC Rating, ATPV - 15.6 cal/cm²; HRC
Level 3
• Meet ASTM F1506
Manufacturer: WALLS
Part Number: ASA WLJ
WALLS FR INSULATED
BOMBER JACKET
KEY FEATURES
•Flame-Resistant
•Single Needle 2” Diamond Quilting
•Bi-Swing Back
•Self Fabric Collar w/Snaps for Optional Hood
•Two Lower Patch Pockets Lined w/FR Twill
•Zippered Front
•Inside Cell/Utility Pockets on Left Chest
•Bartacks at Stress Points
•Triple Needle Stitching on all Construction Seams
•Knit Cuffs & Waist Band
•Articulated Elbows for Ease of Movement
Color
Standard for Safety: Meet ASTM F1506, NFPA 70E U.S.
Safety standards
Fabric:
•10 oz. 88% Cotton / 12% Nylon FR Duck Outer Shell
BANWEAR
•11 oz. FR Modacrylic batting quilted to FR twill lining.
Manufacturer: WALLS
Part Number: ASA WFJ
27
WINTER GARMENTS
NON-FLAME RETARDANTS
NOMEX JACKET
WINTER GARMENTS
WALLS INSULATED QUILTED
DUCK JACKET
Fabrics
Main: Nomex IIIA or Comfort, plain weave
Pocket cloth & lining: FR cotton plain, royal blue
Mosture barrier: PU membrane moisture/wind barrier
Insulation: Light weight fine-fiber polyester fleece
Trims
Zipper: Open ends zipper, SBS
ASA Brand Label: Woven in colors
Content/Wash Label: Printed black on white
ASA Protective Line: Woven label in colors
Size Label: Woven, red on black
Sewing Thread: Aramid
Reflective Stripe: 2” wide silver, flame resistant
Rib knit wrist: 100% cotton, black
Stitch Formation
Major seams: Two needle lock stitch 7-9 stitch per inch
Other Locations:
Double needle stitch for pocket
Setting and reflective stripe setting
Single needle stitch
Color
Construction
• Stitch pocket style, with detachable hood Inside pocket on left
chest
• Plain sleeve end with press studs Hood with Velcro strip joined
to Reflective stripe around arms
• Bartacked at stress pointsjacket with press studs
• Front zipper covered with a storm flap secured
• Press studs on left chest and back
KEY FEATURES
•Medium Weight 100% Cotton Duck w/Durable Water
Resistant Finish
•Heavy Weight Insulation
•Two Patch Pockets
•Front Zipper w/Snap-Over Storm Fly
•Polyester Lining
•Contrasting Brushed Duck Collar
•Knit Cuffs
Manufacturer: WALLS
Color
Part Number: ASA WQJ
Manufacturer: DuPont
Part Number: ASA NWJ 100
PARKA JACKET
MATERIAL
100% cotton flame-retardant cotton, 350 g/m2, quilted
lining in flame retardant polyester padding, 130 g/m2.
Fabric specially designed for wear in cold conditions and
climates where flame retardant protection is required,
Color
WALLS MID WEIGHT
INSULATED JACKET
10-oz. 100% cotton duck. Durable Water Repellent
(DWR) finish. Two lined welt pockets. Banded hem with
elastic in back. Waist hem. Snaps for optional hood.
Front zipper with snap-over fly. Raglan sleeves with knit
cuffs. Inside mesh cell phone pocket. Tough and rugged
for long-lasting durability.
this fabric has been manufactured using the same
KEY FEATURES
pyrovatec treatment to provide the same high levels
•Medium Weight 100% Cotton Duck w/Durable Water
Resistant Finish
•Medium Weight Insulation
•Polyester Lining
•Two Lined Welt Pockets
•Banded Hem w/Elastic in Back Waist Hem
•Contrasting Collar w/Snaps for Optional Hood
•Front Zipper w/Snap-Over Fly
•Raglan Sleeves w/Knit Cuffs
•Triple Needle Stitching for Strength & Durability
•Additional Inside Storage Pocket Located at Right Side
•Inside Mesh Cell Phone Pocket w/ Hook n’ Loop
Closure & Storage Pockets - Left Side
of quality, safety and comfort. Quilted lining in flame
retardant polyester padding. Front pockets with flaps,
with Reflective stripes on the Arms. Tested to EN 531.
Part Number: ASA PWJ 100
Color
Manufacturer: WALLS
Part Number: ASA WIJ
28
29
WINTER GARMENTS
WINTER GARMENTS
AL ASAYEL BRAND WINTER
JACKET
WALLS HOODED FLEECE JACKET
KEY FEATURES
KEY FEATURES
• Heavyweight Fleece Shell
Specification: Nylon Jacket with Fleece lining, Fleece
• Matching Thermal Knit Lining
• 3 Piece Hood with Drawstring
• Front Patch Pockets
• Triple Needle Stitching
• Hanger Loop
line pockets with hideaway hood, made from Wind
proof and Water proof fabric.
Front pockets with flaps and reflective stripes on arms,
Color
shoulders.
• Matching Knit Cuffs & Waistband
• Machine Washable
Manufacturer: WALLS
Part Number: ASA WHJ
Color
Part Number: ASA AWJ 100
WALLS INSULATED W/R HOODED
DUCK JACKET
OCCUNOMIX BOMBER JACKET
KEY FEATURES
•Medium Weight 100% Cotton Duck Shell w/ Durable
Water Resistant Finish
•Medium Weight Polyester Insulation
•Rib Knit Cuffs & Waistband
•Polyester Lining in Sleeves
•Two Lined Front Hand Warmer Patch Pockets
•Rivets at Stress Points for Added Strength
•Additional Inside Storage Pocket Located at Right Side
•Inside Mesh Cell Phone Pocket w/ Hook n’ Loop
Closure & Storage Pockets - Left Side
•Pleated Elbows for Ease of Motion
•Brushed Body Lining
•Three Piece Lined Hood w/ Lacelock Drawstring
•Triple Needle Stitching for Strength & Durability
•Covered Front Zipper
Color
30
PVC coated polyester, nylon lining with heavy poly
fleece removable inner jacket and removableouter
jacket sleeves.
Black collar, cuffs and waistband. Super Warm,
Versatile, and Stylish. Waterproof construction.
Sizes: S-6XL
Manufacturer: OCCUNOMIX
Part Number: LUX-TJBJ
Color
Manufacturer: WALLS
Part Number: ASA WWJ
31
WINTER GARMENTS
WINTER GARMENTS
WALLS JACKET
KEY FEATURES
• Heavy Weight 100% Cotton Double Fill Duck with Durable Water
Resistant Finish (Rigid Only)
• Heavy Weight Polyester Fiberfill Insulation in Body
• Self Goods Contrasting Collar with Snaps for Optional Hood
• Triple Needle Stitching for Strength and Durablity
• Covered Front Zipper with inside fly
• Two Brushed Line Front Hand Warmer Patch Pockets
• Pencil Pockets on Left sleeve
• Brushed Lining in Body & Polyester Lining in Sleeves
• Articulated Elbows for More Flexibility
• Zipper Welt Pocket
• Strom Cuffs for Warmth & Comfort
• Rivets at Stress Points for Added Strenght
• Additional Storage Pocket Located at Right Side
• Improved Inside Mesh Cell Phone Pocket with Hook and Loop
Closure & Storage Pockets
Sizes: S-4XL
Color
Manufacturer: WALLS
Part Number: ASA WCJ 100
32
Welding
Garments
WELDING GARMENTS
WELDING GARMENTS
MIG WEAR Welders Jacket
MIG WEAR FR Welders Apron
MIG100 includes three panels in back for a tailored,
professional, more comfortable look and feel.
Protect welder’s front middle body to thighs with 24” x
MIG WEAR Jacket uses only 9.5 oz/sq yd, 100% FR treated
strap.
36” length MIG WEAR FR Apron with adjustable neck
cotton sateen fabric that is independently certified to
meet ASTM F1506-94, before and after 50 industrial
washings.
Jacket also meets EN533, EN531, and EN470.
Flame = 0, After Glow = 0, Average Char = 2”. MIG WEAR
Apron also meets EN533, EN531, and EN470. 9.5 oz/sq yd,
Non-
reflective snaps at sleeves help prevent sparks from
entering up sleeves and in front for a safe and secure
closure. And, you’ll find a handy inside lapel pocket, for
100% FR treated cotton sateen fabric offers cool comfort,
durability and washability of at least 50 industrial washing
while maintaining FR protection.
small items. All this and lower prices too.
Size: One Size
Size: S-5X
Part Number: MIG300
Color
Independently certified to meet ASTM F1506-94: After
Part Number: MIG100
Color
MIG Wear FR Welders Pants
MIG WEAR FR Welders Sleeves/
Pair - Regular Elastic
MIG WEAR Welding Pants are made with 9.5 oz/sq yd,
MIG WEAR Welder›s Sleeves are a full 18” long with
100% FR treated cotton sateen fabric, independently
simple elastic at top and wrists.
certified to meet ASTM F1506-94 before and after 50
industrial washings.
Made of 9.5 oz/sq yd, 100% FR treated cotton sateen
Also meet EN533, EN531, and EN470.
fabric, independently certified to meet ASTM F1506-94,
before and after 50 industrial washings, protects against
Pants include four pockets, zipper fly, belt loops and
sparks, radiant heat, grinding chips and minor contact
non-reflective black snap.
burns. Sleeves also meet EN533, EN531, and EN470.
Size: 30 to 48 and 30”, 32” and 34” lengths.
A great complement to the 24” x 36” MIG WEAR Apron.
Pair.
Part Number: MIG200
Size: One Size
Part Number: MIG400
Color
34
3
Color
35
WELDING GARMENTS
WELDING GARMENTS
MIG WEAR FR Welders Jacket
KEY FEATURES
Specification: Nylon Jacket with Fleece lining, Fleece
line pockets with hideaway hood, made from Wind
proof and Water proof fabric.
Front pockets with flaps and reflective stripes on arms,
shoulders.
Part Number: ASA AWJ 100
MIG WEAR FR Welders
Coveralls
MIG WEAR Coveralls feature 9.5 oz/sq yd, 100% cotton
sateen FR fabric independently certified to meet ASTM
F1506-94, before and after 50 industrial washings.
MIG WEAR FR Welder’s Coveralls also meet EN533,
EN531, and EN470.
Designed with an action swing back, an elastic waist,
and a snap and zipper (two headed) front closure, for
comfort and protection. Coveralls include handy pockets:
two chest (one pocket and one pen), two back, two front,
two front pass-throughs with snaps and one tool pocket
for convenience. All snaps are non-reflective.
Size: S-5X
Part Number: MIG600
Color
Color
MIG WEAR FR Welders Sleeves/
Pair - Deluxe Elastic
MIG WEAR Welder’s Sleeves are a full 18” long with
deluxe blue and gold elastic at top and wrists.
Made of 9.5 oz/sq yd, 100% FR treated cotton sateen
fabric, independently certified to meet ASTM F1506-94,
before and after 50 industrial ashings, protects against
sparks, radiant heat, grinding chips and minor contact
burns.
Sleeves also meet EN533, EN531, and EN470. A great
complement to the 24” x 36” MIG WEAR Apron. Pair.
Part Number: MIG420
Color
36
37
HIGH VISIBILITY GARMENTS
Vests - Protective Clothing
Type: Surveyor’s Vest
Style: High Visibility
Closure: Zipper
Material: Polyester
ANSI Class 2
Sizes: One size fits all
High
Visibility
Garments
Part Number: RVLO2
Color
High Visibility Garments
Category: Vests
Product: LUX-SSG2T
Description: OccuLux Economy Two-Tone Vest ANSI
Class 2
Size: M-8X
Detail:
• Superior daytime conspicuity. Design includes 2” wide
3M™ Scotchlite reflective tape - One 360* horizontal
stripe plus two vertical stripes to increase visibility at
night, dawn and dusk.
• Bright, breathable, yellow polyester fabric with bright
orange trim increases daytime visibility. Unlike most
other two-tone vests, our orange trim is ANSI compliant.
• One large inside pocket with hook and loop closure and
one outside pocket.
• ANSI 107-2004 Class 2 Compliant
• Machine washable.
Part Number: LUX-SSG2T
Color
39
Flame Resistant Vest
• Meets ASTM F1506 for flame resistance.
• Made with Modacrylic fabric (arc rated fabric).
• FR Thread, binding and closure which conforms to
the ASTM F1506 standard.
• Modacrylic fabric is arc rated at 5.5 cal/sq meters.
• ANSI 107-2004 Class 2 Compliant
• Hook and loop closure, outside pocket, and made of
a lightweight material. 2” 3M™ Scotchlite Reflective
tape. One 360 degree horizontal stripe and two
vertical shoulder stripes.
Category: Vests
Product: LUX-SSG/FR
Description: OccuLux Economy FR Vest
Size: M - 5X
Color
Class II Safety Vest
Sizes: S-7XL
VZ241P: Class II, Lime Mesh Vest, Two Horizontal Silver
Stripes, Zipper Closure, One Inside Pocket
Meets ANSI/ISEA 107-2004 Standards
Specification Sheets and Certificates of ANSI Compliance
are available.
Manufacturer: Al Asayel
Part Number: VZ241P
Part Number: LUX-SSG/FR
Color
Sizes: S-7XL
Sizes: S-7XL
Class II, Orange Mesh Vest, Two Horizontal Silver
Stripes, Zipper Closure, One Inside Pocket
Specification Sheets and Certificates of ANSI
Compliance are available.
Part Number: VZ240P
Class II, Orange Mesh Vest, Silver Reflective Tape,
Velcro Closure
V211P: Class II, Lime Mesh Vest, Silver Reflective Tape,
Velcro Closure
are available.
Part Number: V210P
Color
40
Color
41
Class II Safety Vest: VZ250P
Sizes: S-7XL
Sizes: M-5XL
Class II, Lime Mesh Breakaway Vest, Two Horizontal
Silver Stripes, Velcro Closure, One Pocket
VB230P: Class II, Orange Mesh Breakaway Vest, Two
Horizontal Silver Stripes, Velcro Closure, One Pocket
Specification Sheets and Certificates of ANSI
Class II, Orange Mesh Vest, Two-Tone Stripes, Inside
Chest Pocket, Zipper Closure
VZ251P: Class II, Lime Mesh Vest, Two-Tone Stripes,
Inside Chest Pocket, Zipper Closure
are available.
Part Number: VB231P
Color
roloC
Non-Rated Safety Vest: V100L
Non-Rated Safety Vest: V120L
Sizes: Men’s
Sizes: Men’s
Non-Rated, Orange Mesh Vest, No Reflective Tape,
Velcro Closure
Non-Rated, Orange Mesh Vest, 2-inch, Lime Reflective
Tape, Velcro Closure
V101: Non-Rated, Lime Mesh Vest, No Reflective Tape,
Velcro Closure
V121W: Non-Rated, Lime Mesh Vest, 2-inch, Silver
Reflective Tape, Velcro Closure
Color
roloC
42
43
Non-Rated Safety Vest: V111W
Sizes: Men’s
Non-Rated, Lime Mesh Vest, 1-inch, Silver Reflective
Tape, Velcro Closure
V110L: Non-Rated, Orange Mesh Vest, 1-inch, Lime
Reflective Tape, Velcro Closure
Rain Wear
Color
Class II Safety Vest: VS270P
Sizes: M-4XL
Class II, Surveyors Vest, Orange Mesh, Silver Stripes,
Zipper Closure, Four Front Pockets
VS271P: Class II, Surveyors Vest, Lime Mesh, Silver
Stripes, Zipper Closure, Four Front Pockets
Specification
Sheets
and
Certificates
of
ANSI
Color
44
RAIN WEAR
RAIN WEAR
Acid / Chemical Suit
High Visibility Suit
•35mm, PVC/Polyester Construction
• 45mm, PVC/Nylon Scrim/PVC Construction
• Reflective Tape on Chest, Arms and Legs
• Flame Retardant
• Full Cut Jacket with Detachable Hood
• Storm Fly Front with Zipper and DURACON® Snaps
• Corduroy Collar
• Attached Hood with Drawstring Closures
• Green Color for Easy Identification
• 2 Piece Overall
•Storm Fly Front with Zipper and DURACON®
Snaps Buttons
• Large Reinforced Flap Pockets
• Ventilated Cape Back and Underarms
• Bib Pants with Suspenders
Suit Sizes: M-6XL
• 3-Piece High Visibility Lime Green Rain Suit
Part Number: RS452G
Suit Sizes: S-6XL
Part Number: HV353G
Color
High Visibility Suit
Color
Hydro-blast Suit
• 35mm, PVC/Polyester Construction
• Reflective Tape on Chest, Arms and Legs
• Full Cut Jacket with Detachable Hood
• Corduroy Collar
• Storm Fly Front with Zipper and DURACON® Snaps
Buttons
• 30mm, PVC/Polyester/PVC
• Attached Hood with Drawstringss
• Velcro® Closures at all Openings
• Large Reinforced Flap Pockets
• High Visibility Yellow Color
• Ventilated Cape Back and Underarms
• 2 Piece Suit
• 3-Piece High Visibility Suit
Suit Sizes: S-7XL
Suit Sizes: S-6XL
Part Number: RSHB352Y
Part Number: HV353Y
Color
46
Color
47
RAIN WEAR
RAIN WEAR
Renegade
Value Line
• 60” Length for Full Body Protection
•10mm, 100% Single Ply Construction
• Black Color
•High Visibility Yellow Color
• Corduroy Color
• 3-piece rain suit
• Ventilated cape Back and Under arms
• Open Front with Snap Buttons
• Two Flapped Pockets
• Pants with Elastic Waist
• 2-piece Raincoat
Suit Sizes: S-5XL
Suit Sizes: S-5XL
Part Number: RS103Y
Part Number: RC35B60
Color
Chemtex
Storm Front Suit
• 10mm, 100% Single Ply Construction
• 3-piece rain suit
• Open Front with Snap Buttons
• Pants with Elastic Waist Suit
Sizes: S-5XL
Part Number: RS103Y Renegade
• 60” Length for Full Body Protection
• Black Color
• Corduroy Color
• Ventilated cape Back and Under
arms
• Two Flapped Pockets
• 2-piece Raincoat Suit Sizes: S-5XL
Part Number: RC35B60 Rain Wear 30
Hydro-blast Suit
• 30mm, PVC/Polyester/PVC
• Attached Hood with Drawstringss
• Velcro® Closures at all Openings
Suit Sizes: S-7XL
Manufacturer: Al Asayel Part
Number: RSHB352Y
Color
48
• 2 Piece Suit Storm Front Suit
• 35mm, PVC/Polyester Construction;
• 100% Waterproof and Non Conductive
• 3-piece High Visibility Yellow Rain Suit
Jacket Features:
• 2-piece Full Cut Jacket with
Detachable hood
• Corduroy Collar
• Storm Fly Front with Zipper and
DURACON® Snap Buttons
• Ventilated Cape Back and Under-arms
Pant Features:
• Bib Pants with Suspenders Suit
Sizes: S-7XL
PART NUMBER: RS353Y STORMFRONT:
Three-Piece Rainsuit, .35 mm. Yellow,
PVC/ Polyester Fabric, Corduroy Collar,
Bib Pants with Suspenders, Storm
Fly Front with Zipper/Snap Buttons
RS352Y: STORMFRONT, Two-Piece
Rainsuit, .35 mm. Yellow, PVC/Polyester
Fabric, Corduroy Collar, Bib Pants
with Suspenders, Storm Fly Front with
Zipper/Snap Buttons, Available in
Sizes S-3XL RJ352Y: STORMFRONT,
Two-Piece Rain Jacket, .35 mm. Yellow,
PVC/Polyester Fabric, Detachable
Hood, Storm Fly Front with Zipper/
Snap Buttons, Available in Sizes S-3XL
RJH35Y: STORMFRONT, One-Piece Rain
Jacket, .35 mm. Yellow, PVC/Polyester
Fabric, Storm Fly Front with Zipper/Snap
Buttons, Available in Sizes S-5XL
Features:
•Heavy duty PVC on high coubnt nylon polyester.
• Complies with ASTM D6413-99.
•Reinforced knees, elbows and crotch area to
prevent splitting.
•Heavy duty elastic adjustable suspender with
deluxe suspender clip.
• Adjustable waist snaps for the perfect fit.
• Cord locks on hood strings.
•Ankle and cuff take-up snaps for a snug/tapered fit.
Level C protective clothing for protection from a
variety of chemical applications. This “Level C”
garment not to be used in “Level A” environments.
Manufacturer: Onguard
Part Number: 71020
49
RAIN WEAR
RAIN WEAR
Visitex II
Duratex
Features:
Features:
Protective clothing for inclement weather. Highviz Lime Yellow PVC on .35 mm polyester. Meets
Federal Apparel Flammability Act, FDS 5903.1. Dual
entry (top and side) pockets on jackets. 2” reflective
stripes. Heavy duty elastic adjustable suspender with
deluxe suspender clip. Jacket with storm flap front.
Adjusable waist snaps for the perfect fit. Ankle and
cuff take-up snaps for a snug/tapered fit. Cord locks
on hood strings. Cape back jacket with vents.
Suit Sizes: S-5XL
Part Number: 72115
• Industrial strength Protective Clothing
• Tear resistant PVC on polyester for the ultimate in
heavy duty, durable, protection
• Constructed of heavy duty .40mm high density PVC
on polyester to provide high abrasion resistance
• Duratex Jacket has detachable hood has double
elbows for extra strength
• Extra wide storm flap on jacket for splash/spray
protection
• Deep forest green color with textured finish that is
easy to clean and decontaminate
• Material: PVC on Polyester
• .40 mm material thickness
• Bib overall not included
Suit Sizes: S-5XL
Part Number: 70032
Neotex
Specifications
• Constructed of heavy duty neoprene on nylon
•Reinforced crotch area tprevent splitting
•Heavy duty elastic adjustable suspender with
deluxe suspender clip
•Jacket with storm flap front
•Adjustable waist snaps for the perfect fit
•Ankle and cuff take-up snaps for a snug/tapered fit
•Cord locks on hood strings
•Underarm vents to keep you cool
•Two front snap pockets on jackets
Part Number: 74023
50
51
DISPOSABLE WEAR
DISPOSABLE WEAR
TYCHEM DISPOSABLE COVERALL
Tychem® F – Tyvek® non-woven fabric + polymeric
coating + barrier film + polymeric coating Standard
Coverall, grey, hood with elastic face opening for tight
fit around respirator, stitched and over taped seams,
double self-adhesive zipper flap, elastic cuffs, ankles
and waist, 100% particle tight resists liquid splashes
of pressures up to 5 bar, excellent barrier against
organic chemicals, highly concentrated inorganic
chemicals and biological hazardsS-XXL2513.50Cat III.
Disposable
Wear
Sizes: S – 3XL
Manufacturer: Part Number: DUPONT
ASA TDC 100
Color
TYVEK DISPOSABLE COVERALL
DuPont Tyvek® suits offer high strength and provide an
excellent barrier in light splash ituations as well as many
dry particulates, including asbestos, lead dust, and even
radioactive dusts.
Some other applications include general maintenance, food
processing, and painting.
Tests show that DuPont Tyvek® maintains its level of barrier
protection after being subjected to abrasion and flexing.
DuPont Tyvek® garments retain their shape and will not
stretch out after kneeling and bending. No other material on
the market has the superior protective properties, comfort and
endurance of DuPont Tyvek®.
• Hood, Zipper front, storm flap, adhesive strip closure,
elasticated waist, wrists & ankles, overtaped seams.
• Manufactured for the Nuclear industry, to EN1073-2.
• With its overtaped seams this suit is ideal for toxic dry
particulate environment or where liquid penetration through
seams should be avoided.
• Only Type 4 nonwoven suit, take full advantage of Tyvek
unique inherent barrier protection as seams are tight
• Electostatic protection according to EN1149-1
• Best solution for mask wearers, best fit for respirators.
Sizes: Manufacturer: Part Number: al asayel workwear & personal protective PROTECTIVE GEAR
S – 2XL
DUPONT
ASA TDC 101
Color
53
DISPOSABLE WEAR
DISPOSABLE WEAR
Defender Coverall
Sizes: M-5XL
Defender Microporous Coveralls: Zipper Front and
Collar, Set Sleeve Design, No Elastic, Hood or Boots
CPE:
Defender Microporous Coveralls:
Zipper Front and Collar, Elastic at Wrists and Ankles,
No Hood or Boots
CPH:
Zipper Front and Collar, Elastic at Hood, Wrists and
Ankles, No Boots.
CPHB:
Zipper Front and Collar, Hood and Boots
Manufacturer: Part Number: Color
Polypropylene Lab Coat
Sizes:
S-4XL
Heavy Weight, 3-Pocket, White Polypropylene Lab
Coat, Collar, Open Wrists, Snap Button Front
LC55EP: Heavy Weight, 2-Pocket, White Polypropylene
Lab Coat, Collar, Elastic Wrists, Snap Button Front
(L-4XL)
LC55PC: Heavy Weight, 2-Pocket, White Coated
Polypropylene Lab Coat, Collar, Elastic Wrists (XL &
2XL)
Manufacturer: Part Number: Al Asayel
LC55
Al Asayel
CP Polypropylene Coverall
Polypropylene Shoe Cover
Sizes: S-4XL
Standard Weight, White, Polypropylene Coveralls with
Collar, Zip Front, Elastic Wrists and Ankles
COHB35: Standard Weight, White Polypropylene
Coveralls with Zip Front, Hood and Boots (L-4XL)
COE: Economy Weight, White Polypropylene Coveralls
with Collar, Zip Front, Elastic Wrists and Ankles (L-3XL)
EOEHB: Economy Weight, White Polypropylene
Sizes:
L & XL
Blue, Non-Skid, Polypropylene Shoe Cover
Manufacturer: Part Number: Al Asayel
SC40L
CO55: Heavy Weight, White Polypropylene Coveralls
with Collar, Zip Front, Elastic Wrists and Ankles (L-4XL)
COHB55: Heavy Weight, White Polypropylene
Manufacturer: Part Number: Color
54
Al Asayel
CO35
55
DISPOSABLE WEAR
DISPOSABLE WEAR
Nylon Beard Cover
Cordova Gold: Exam Grade/
Powdered
Sizes:
Sizes: One Size Fits All
XS-XL
Al Asayel Gold, Latex Examination Gloves,
Powdered, 5-mil
White Nylon Beard Cover
Class 1 Medical Device
Made with FDA Accepted Materials for Food
Manufacturer:
Al Asayel
Part Number:
BN/10 Contact Application
Manufacturer:
Al Asayel
Part Number: 4000
Color
PE Gloves/1.25 mil
Sizes:
S-L
Sizes:
Low Density Polyethylene Gloves (LDPE), Embossed,
1.25 mil
4102: High Density Polyethylene Gloves (HDPE),
Embossed, 1.0 mil, Size Large Only
Made with FDA Accepted Materials for Food Contact
Applications
56
Manufacturer:
Al Asayel
Part Number: 4100
Cordova Silver: Ind.Grade/
Pow. Free
XS-XL
Al Asayel Silver, Latex Industrial Grade Gloves,
Powder Free
Made with FDA Accepted Materials for Food
Contact Applications
Manufacturer:
Al Asayel
Part Number: 4015
57
DISPOSABLE WEAR
DISPOSABLE WEAR
Syn-Cor Gold: Exam Grade/
P.Free
Sizes: S-XL
Sizes: S-XL
Syn-Cor Gold, Vinyl Examination Gloves, Powdered,
5-mil
Applications
Nitri-Cor Gold, Nitrile Examination Gloves, Powder
Free, 4-mil
Applications
Part Number: 4060 Part Number: 4085
Nitri-Cor Silver: Ind.Grade/
P.Free
58
Nitri-Cor Gold: Exam
Grade/P.Free
Nitri-Cor Platinum: Ind.
Grade/P.Free
Sizes: S-XXL
Sizes: S-XL
Nitri-Cor Silver, Nitrile, Industrial Grade Gloves,
Powder Free, 4-mil
Applications
Nitri-Cor Platinum, Nitrile, Industrial Grade Gloves,
Powder Free, 8-mil
Applications
Part Number: 4095
Part Number: 4097
59
FOOTWEAR
FOOTWEAR
Georgia Giant Wellington
Steel Toe / Steel Shank
KEY FEATURES
• Soggy Brown Full Grain Leather
• Covered Side Seams
• Covered Cushion Insole
• Stitched Oil Resistant Rubber Bumper Guard
• Lightweight Oil Resistant 2 Density Outsole
• Repairable Goodyear Welt Construction
• Safety Toe Class I75 / C75 & Electrical Hazard Resistant
Manufacturer: GEORGIA
Footwear
Part Number: G4374
Sizes: 6 to 13W
Georgia Giant Protective Toe
Work Boots
KEY FEATURES
•Georgia Giant Covered cushion insole- comfort
underfoot
• EVA midsole – Comfort
• Full grain leather - Molds to your foot
• High performance lining - Durable, dry comfort
• Internal Padded Collar
•Oil resistant bumper guard - Long life, low
maintenance
•Repairable Goodyear welt construction-replaceable
outsole, solid footing, long lasting
• Steel shank - Solid stable work platform
• Steel Toe
• Unlined Quarters
ASTM CLASS: ASTM F2413-05 175 C75 EH
Part Number: G8374
Sizes: 6 to 13W
61
FOOTWEAR
FOOTWEAR
Georgia Giant Safety Toe
Work Boots
KEY FEATURES
• Soggy Brown Giant – Full grain leather –Molds to
your foot
•Repairable Goodyear welt construction –
Replaceable outsole, solid footing, long lasting
• High performance lining – Durable, dry comfort
• Steel shank – Solid stable work platform
• Covered cushion insole – comfort underfoot
• EVA midsole – Comfort
• Oil resistant bumper guard – Long life, low
maintenance
• Unlined quarters
• Internal padded collar
Part Number: G6374
Sizes: 6 to 13W
Carvi BG S3 SRC
SOLE:
- Polyurethane dual density sole
- Density : 1.13
- Thickness : 5 mm
- Height of cleats : 2.5 mm
- Textile antiperforation midsole
UPPER:
- Full-grain leather
- 3d fabric lining - ANTIPERSPIRATION AND ANTIBACTERIAL
- Resistance to :
* abrasion (lost in volume) 12 mm3
* tearing : 10.4 kN/m
* flexion (after 30 000 cycles) : >45°
* oil and petrol (variation in volume) 0 %
- Slip resistance : SRC
PLUS:
- Sole with fluids drainage system, integrated foot arch support,
profiled heel for scale, antitwisting system and shock absorber.
- Metal free
USE:
- Adapted for smooth and greasy soils
- Food industry
- Construction and public works
- All industries
Sizes: 39 to 47
Manufacturer: GASTON MILLE
Part Number: Carvi BG S3 SRC
Gaston Mille Hot Cumin
BGS3 SRC
SOLE:
- Polyurethane dual density sole
- Density : 1.13
- Thickness : 5 mm
- Resistance to :
UPPER:
- Full-grain greased leather
-Non woven calendered lining - ANTIPERSPIRATION
AND ANTIBACTERIAL
USE:
- Adapted for smooth and greasy soils
- Food industry
- All industries
PLUS:
- Sole with fluids drainage system, integrated foot arch support,
profiled heel for scale, antitwisting system and shock absorber.
Sizes: 39 to 47
Part Number: Hot Cumin BG S3 SRC
62
Hot Moon SG S3 SRC
USE:
- Transport
- Distribution
- Food-processing industry
- Geomembrane
SOLE:
- PU/TPU
- Density : 1.13
- Thickness : 5 mm
- Resistance to :
UPPER:
- Nubuck full-grain leather and microventilated mesh
- 3D mesh lining - antiperspiration and antibacterial
PLUS:
- Very light and flexible sole
- Anti-slip system, anti-abrasion, minigrip pads, anti-twisting,
integrated foot arch support and shock absorber
- Metal free
Sizes: 39 to 47
Part Number: Hot Moon SG S3 SRC
63
FOOTWEAR
FOOTWEAR
UNION S3
SOLE:
- Dual density polyurethane
- Coef.d ‘grip on smooth floors and industrial fat: 0.30
- Density: 1.1
- Thickness: 8 mm
- Abrasion resistance (volume loss): 18 mm3
- Tear Strength: 9 kN / m
- Bending strength (after 30 000 cycles): 0 mm
- Resistance to oil: 3%
STEM:
- Leather fat very high quality waterproof and oil
resistant.
-Lining calendered non-woven airy antisudation and
antifungal.
PLUS:
- Comfort insole, antisudation and antifungal.
- Soufflé and protects ankles in Cordura®,
-Ski and side bumpers front and rear for effective
protection against any shocks.
- Ear steel extra wide for more comfort.
- Coefficient of adhesion élevé. Propriétés very static.
Rocky IronClad Waterproof
Wellington Work Boot
FEATURES
-7 Layer Slip and Oil Resistant:
*Makes the outsole lighter
*Creates more give
*Generates springiness
*Provides cushioning
-Waterproof
- EVA midsole
- Polyurethane Footbed
- Extra durable-ribbed tempered Steel Shank
Sizes: 8 to 13
Manufacturer: Rocky
Part Number: 5685
Sizes: 39 to 47
Part Number: Union S3
RIPPER S3
SOLE:
- Dual density polyurethane
- Coef. grip on industrial floors smooth and fat: 0.30
- Density: 1.1
- Thickness: 8 mm
- Height of studs: 5.2mm
- Abrasion resistance (volume loss): 18 mm3
- Tear Strength: 9 kN / m
- Bending strength (after 30 000 cycles): 0 mm
- Resistance to oil: 2%
- KEVLAR ® midsole.
STEM:
- Leather Waterproof full grain nubuck and oil repellent and
Cordura®,.
- Lining ‘cooling’ Coolmax®, quilting and Cordura®, gusset.
PLUS:
- Special Agent Safety: the label affixed to the tongue or the
bellows of the boot security compliance comprehensive
specifications AGENT FOR HEALTH.
-Antistatic.
-Comfort insole, antisudation and antifungal.
- Ear steel extra wide for more comfort and puncture-proof
Kevlar®, outsole and insert special anti - Felt heat with
aluminized face soil.
- Kevlar®, outsole: protection of the total area of the foot,
insulation undetectable by metal detector, lighter, very
flexible and completely flexible.
Rocky Great Oak GORE-TEX®
Logger Work Boot
FEATURES
•Durably Waterproof and Breathable GORE-TEX® fabric
•Goodyear Welt Construction
• Full-Grain Leather Upper
•Removable contoured PU cushion footbed
•Traditional leather welt
Sizes: 8 to 13
Manufacturer: Rocky
Part Number: 2544
Sizes: 39 to 47
Part Number: Ripper S3
64
65
FOOTWEAR
FOOTWEAR
SAFETY RAIN BOOTS
Florsheim Quick Release 6”
Slush Boots
FEATURES
•6” Black Protec Leather
•Tailbrelle Lining
•Removable Polyurethane Cushion Insert
•Shock Absorbing PU Midsole
•Direct Attach, Long Wearing Rubber Outsole
•Flexible Flex Met ™ Internal Metatarsal Guard
•Steel Toe Rated ASTM F2413-05 I/75 C/75
•Electrical Hazard
Sizes: 7 to 14
Manufacturer: Florsheim
Part Number: FE690
SOLE:
Yellow Upper with Black Ribbed Sole, Cotton Lined, Top
Strap & Buckle Adjustment, 17-inch Length, Over-Shoe
Style
Sizes: 6-18
Manufacturer: Part Number: Florsheim Comfortech
Cordova
BYS17
Five Buckle Boots
FEATURES
•Black Soft Leather Slip On
•No Metal On Upper
•Comfortech Pucker Moc Casual Oxford
•Cambrelle Lining
•Removable EVA Cushion Insert
•Florsheim Slip Resistant PU Outsole
•Steel Toe Rated ASTM F2413-05
•Static Dissipated
• Slip - Best
• Oil - Best
• Metal Chips - Better
• Heat - Better
• Abrasion - Best
• Chemicals - Best
Black Uppers with Brick Red Ribbed Soles, Five
Adjustable Buckles, Self-Draining Gussets, 14-inch
Length, Over-Shoe Style
Sizes: 7-16
Manufacturer:
Part Number:
Cordova
BB5B
Sizes: 7 to 14
Manufacturer: Florsheim
Part Number: FS205
66
67
FOOTWEAR
FOOTWEAR
Steel Toe Boots
Steel Toe/Steel Midsole
16” Boots
FEATURES & BENEFITS:
Black Uppers with Black Ribbed Soles, Cotton Lined,
Steel Toe and Steel Shank, 16-inch Length
Excellent for use in orchards, vegetable fields, citrus
groves, and agriculture.
Sizes: 6-15
• Injected molded seamless construction
• Steel toe complies with ASTM F2413-05 and CSA Z195
• Full steel midsole
• Replaceable cushion insoles
• Cut-off bands for height adjustment
• Pull-up and kick-off lugs for easy on and off
Manufacturer:
Part Number:
Cordova
BST
Manufacturer: Part Number:
Over the Sock Boots
Onguard
86102
Gator
FEATURES & BENEFITS:
Black Uppers with Brick Red Ribbed Soles, Cotton Lined,
Plain Toe Design, 16-inch Length
Sizes: 7-14
Manufacturer:
Part Number:
Cordova
BB16
• 100% waterproof, durable, injection molded black PVC
overshoe
• Closure buttons are molded onto the boots for added
strength
• Self-cleaning Large Lug outsole for added traction in
most conditions
• Elastic closure loops with stitched tabs can be easily
secured with gloves
• Molded extra large kick-off lugs
68
Onguard
89802
69
FOOTWEAR
FOOTWEAR
Georgia Diamond Trax
SteelToe W’Proof Work Shoe
Featured Specifications
CC5 Comfort Core Removable PU Footbed
ASTM F2413-05 I/75 C/75 Protective Toe Classification
Georgia Waterproof System
Ultra slip-resistant Diamond Trax outsole
ASTM F2413-05 Electrical Hazard Standard
Full-Grain Leather Upper
Composite toe
Flexible PU midsole
Full-Grain Leather
Oil & slip-resistant suspension lugged rubber outsole
Sizes: 6 to 13W
Part Number: G6693
Georgia Diamond Trax Steel
Toe W’Proof Work Boot
70
Georgia Diamond Trax Steel
Toe W’Proof Wellington
Sizes: 6 to 13W
Part Number: G4693
Georgia Suspension System 6”
Work Boot
Ultra slip-resistant Diamond Trax outsole
Composite toe
Flexible PU midsole
Full-Grain Leather
Sizes: 6 to 13W
Part Number: G8693
Sizes: 6 to 13W
Part Number: G6683
71
FOOTWEAR
FOOTWEAR
Georgia Suspension System
Composite Toe Wellington
Georgia CC5 PU removable footbed
Abrasion-resistant Pivot Pod is strategically located to
prolong outsole life
Composite toe
Flexible PU midsole
Sizes: 6 to 13W
Part Number: G4683
Georgia Homeland Steel Toe
Wellington Work Boot
Dual-density PU and memory foam CC7 removable
footbed
Expansion Fit Seam for easy on/off
High rubber sidewall
Oil and slip-resistant rubber outsole with self cleaning
tread pattern
Reinforced sidewall stitching
Waxy pebbled full-grain leather upper
Sizes: 6 to 13W
Part Number: G5723
72
Georgia Homeland Work Boot
High rubber sidewall
Lace locking top hooks
Oil and slip-resistant rubber outsole with self cleaning
tread pattern
Reinforced sidewall stitching
Waxy pebbled full-grain leather upper
Dual-density PU and memory foam CC7 removable
footbed
Sizes: 6 to 13W
Part Number: G8423
Georgia Ironton Internal MetGuard PR Work Shoe
Lenzi puncture-resistant plate
Non-Metallic Hardware
Wideload Toe Box
AMP, Advanced Memory Polyurethane footbed
ANTImpact soft internal metatarsal guard
ASTM F2413-05 Metatarsal Guard Standard
ASTM F2413-05 Puncture Resistant Standard
Sizes: 6 to 13W
Part Number: G6762
73
FOOTWEAR
FOOTWEAR
Georgia Ironton External MetGuard Work Shoe
ASTM F2413-05 Metatarsal Guard Standard
Nubuck leather upper
Soft ANTImpact Leather Covered External Met-Guard
Wideload Toe Box
Sizes: 6 to 13W
Part Number: G6742
Georgia Ironton Steel Toe
Waterproof Work Shoe
Perimeter abrasion rubber protection
Wideload Toe Box
Sizes: 6 to 13W
Part Number: G6743
74
SAFETY GLASSES
SAFETY GLASSES
North N-Vision Series Safety
Glasses
• Modern ergonomic design for comfort and fit
• Easy lens replacement system
• Frame made of new Elasto LT chemical resistant
material
• Comfortable straight and curved temple ends supplied
with all N-Vision 5600 Series eyewear
• The lenses are protected with Horth’s exclusive 4A
Coating: Anti-Fog, Anti-Scratch, Anti-UV 99.9%, AntiStatic
• Meets and/or exceeds ANSI Z87.1 and CSA Z94.3
Manufacturer: North
Part Number: T5650
Safety
Glasses
Easy-Flex™ Protective Eyewear
• 99% UV protection
• Polycarbonate lenses for high-impact protection
• Temples and frame flex to fit a wide variety of faces
• Hard-coated lenses
Manufacturer: MSA
Part Number: 10070920/-19/-18/-17
Pyrenees™ Protective Eyewear
• Dual injection soft tip temples
• Full side protection
• Meets Z87+ and CSA Z94.3.
Manufacturer: MSA
Part Number: 10033716
77
SAFETY GLASSES
SAFETY GLASSES
Aurora™ Protective Eyewear
• 9-base curved lens
• Wrap-around stylish eye protection
• “Easy Fit” Spring-comfort adjustable nose bridge
• Soft straight-back temples
• Vertical ratchet adjustment
Comply with all applicable test requirements of ANSI
Z87.1-2003 (high impact)
Manufacturer: MSA
Part Number: 10026008/-5/-6/-7
Aggressor: Gun-Metal Frame
Protection with Attitude
• Highly Flexible
• Fusion Orange Polycarbonate Lens
• Rugged Gun Metal Nylon Frame
• Modern Full-Sized Design
• CASC (Al Asayel Anti-Scratch Coating)
• Black Thermo-Plastic Temples & Nose Piece
• Meets ANSI Z87.1 + (High Impact) and CSA
Z94.3 Standards
Sizes: One Size Fits Most
Part Number: EO3S10/-95/-20
Luxor
• Soft nose pads.
• Clear or gray-tinted Lens
• Frameless design
• Tuff-Stuff scratch resistant lens.
• Adjustable temples.
• One piece wrap protection.
Manufacturer:
Part Number:
MSA
697516/-17
Vendetta
An updated classic
• High Flexible
• Shiny Black Nylon Frame
• Fusion Blue Polycarbonate Lens
• Integrated Side Shields
• CASC (Al Asayel Anti-Scratch Coating)
• Meets ANSI Z87.1+ (High Impact) and CSA
Z94.3 Standards
Part Number: E02B10/E02B65
Arctic™ Elite Protective Eyewear
• Soft tip temples
• Padded nose bridge
• Lightweight
• A notch above the standard Arctics
• Eyewear provides excellent side- and front-impact
protection.
• Very comfortable to wear.
Manufacturer:
Part Number:
78
MSA
10038846
Opticor
Technical Perfection:
• Frameless with Black Nylon Temples
• One Piece Lens with Integrated Side Shields
• Clear Anti-Fog Polycarbonate Lens
• CASC (Al Asayel Anti-Scratching Coating)
• Meets ANSI Z87.1+ (High Impact) and CSA
Z94.3 Standards
Part Number: E01B10/T/-30/-60
79
SAFETY GLASSES
SAFETY GLASSES
Bulldog: Gray Lens/Foam Seal
Doberman
Bulldog, Black Frame/Gray Anti-Fog Lens with
Polyurethane Foam Seal
Foam Seal prevents debris from entering the eye area
when working overhead
All Styles Meet or Exceed ANSI Z87.1+ Standards
Doberman, Black Frame/Silver Mirror Polycarbonate
Lens, CASC (Al Asayel Anti-Scratch Coating), Gel Nose
Piece and Temples
Part Number: EHF20-FST
Bulldog: Frosted
Bulldog, Frosted Blue Frame/Blue Polycarbonate Lens,
CASC (Al Asayel Anti-Scratch Coating)
EPHF15S: Bulldog Pups (Smaller Size)
Part Number: EHF15S/-30S/-20S
Bulldog: Black Frame
Bulldog, Black Frame/Silver Mirror Polycarbonate Lens,
CASC (Al Asayel Anti-Scratch Coating)
Part Number: EHB70S/-60s
80
Part Number: ENB20S/-50S/-70S/-60S
Retriever II
Retriever II, Black Frame/Gray Polycarbonate Lens,
CASC (Al Asayel Anti-Scratch Coating), Ratcheting,
Extendable Temples
Part Number: EMB10S/-20S/-NWWR10S
Slammer: Uncoated Frame
Slammer, Uncoated Frame/Gray Lens
EC20SX: Jumbo Size, Uncoated Frame/Gray Lens, Fits
over Prescription Glasses
EC20SH: Hard Coated Frame/Gray Lens
Part Number: EC10S/-20S
81
SAFETY GLASSES
SAFETY GLASSES
Perforated Goggles
Perforated Goggles, Clear, Anti-Fog Polycarbonate Lens
with Elastic Strap
Meets ANSI Z87.1+ Standards
Part Number: GD10T
Spectacles RX over glasses clear
MSA Rx overglasses offer wide-angle viewing for
distortion-free vision, limited lens curvature for maximum
optics, and horizontal and vertical adjustable temples for
custom fit. Lenses feature the anti-fog and anti-scratch
coatings. Fits over most prescription eyewear.
Meets ANSI Z87.1-2003 High Impact. Lens: Black, anti-fog,
Frame: Royal blue
- Royal blue horizontal and vertical adjustable temples
- Wide-angle viewing without distortion
- Limited lens curvature for the best optics
Manufacturer: MSA
Indirect Ventilation Goggles
Indirect Ventilation Goggles, Chemical Splash
Protection, Clear Polycarbonate Lens with Elastic Strap
Meets ANSI Z87.1+ Standards
Part Number: GI10
Clearvue® 200 Goggles
Principles of Operation
The frame design allows
for a comfortable, secure,
evenly distributed fit against
the wearer’s face. A flexible,
rolled-in cushion at the temples
provides
comfort
without
tension or pressure points. The
wide, elastic headband keeps
the goggles securely in place
and enables easy adjustment.
The unique ventilation system,
positioned just above the bridge
of the nose, permits constant
upward flow of air over the
lens. The oversized, spherical,
polycarbonate lens protects
against chemical splash and
ultraviolet rays, while permitting
unobstructed viewing.
Spectacles Impression II
Approvals & Standards
Meets
or
exceeds
all
requirements of ANSI Z87.12003 (High Impact).
Applications
Agriculture
Mining
Hazards
Projectiles
Product Information
Features an integrated-frame
design and a flexible, rolled-in
cushion at the temples, which
provides
comfort
without
tension or pressure points.
Manufacturer: MSA
Part Number: 696776
Sperian Stellar
Key Features
Sightgard Industrial Protective Eyewear is designed for
protection against impact hazards and/or flying particles,
dust, sparks, and glare. Sightgard Industrial Protective
Eyewear provides excellent side- and front-impact
protection while still being comfortable to wear.
-Vertical and Horizontal Temple Adjustments
- Extended Cheek and Brow Protection
- Clear Anti-Fog Lens
Manufacturer: MSA
82
Classical Design Model in a metal frame. Features
adjustable hypoallergenic nose pads and metal temples
with 3D spatula tips.
- EC Category PPE, Standards EN 166/EN170, European
Directives 89/686/EEC, ISO 9001/2000, impact rating F (low
energy impact)
Clear Lens, 57mm or 67 mm, Anti-scratch Coating
Manufacturer: Sperian
83
SAFETY GLASSES
SAFETY GLASSES
Schutzbrille SP1000™
Polycarbonat
Contemporary style that can be worn with temples or
headband. Provides protection against impact, sun, wind,
and debris. Ideal for high-particulate environments such
as grinding, chipping and sanding.
EN 166, 170, 172 : 2002 - EC Category PPE: Annex II of the
PPE - Directive 89/686/EEC UV: 2C-X B-D 1 FT K N – 166 FT
3 CE Sunglare: 5-Y B-D 1 FT K N – 166 FT 3 CE for details
see schedule for the different models
• Available with Dura-streme™ dual coating technology
which combines our two best lens coatings —
Uvextreme® anti-fog on the interior and Ultra-dura® antiscratch on the exterior — for 3x longer lens life*
• Soft and flexible nasal pads conform to a variety of facial
profiles and minimize slippage.
• Soft, high-quality face cushioning and padded temple
tips offer all-day comfort.
• Highly adjustable flame-resistant headband provides
excellent fit.
Deluxe Eyewear Lanyard
Color:
Black
Length:
12”
Material:
Nylon
Style:
Abrasion Resistant
Thickness: 0.25”
Type:
Eyewear Lanyard
Manufacturer: MSA
Part Number: SP1000
Bionic Faceshield-Clear, PC FogBan/Anti-scratch Visor
Feature
• Extended top of head and chin protection. • Large
superior-quality visors for maximum visibility. • Easily
replaced visors available in different materials, tints and
finishes to better suit individual needs. • Comfortable fit
with goggles or respirators. • Locking mechanism for
more complete safety. • Dielectric design.
Benefit
This Bionic faceshield offers maximum protection
Feature
• Incredible adjustability (2784 possible wearer positions).
• Fully adjustable ratchet headgear. • Fully adjustable
headband. • Multiple visor tilt positions. • Extra soft
cushioning on all parts of the shield in contact with the
head. • Breathable extra-soft sweatband is removable for
easy washing and replacement.
LENS CLEANING
Feature
• Dispenser box of 100 lens cleaning towelettes
• Anti-static, anti-fog formula
• Silicone and alcohol free
• Biodegradable
• Enviro-friendly cabinet
• Complete with pump dispenser of 500 ml, anti-fog
cleaning fluid and cleaning tissues
• No hardware required-hang it anywhere
• Nothing to fill, comes ready to use
• Instantly cleans spectacles, goggles and faceshields
• Removes toughest grime and grease
• Its anti-fog actions is significantly longer lasting than any
other on the market
Manufacturer: North
Part Number: LCS2 and T1025T
Part Number: SP1000
84
85
HEAD PROTECTION
HEAD PROTECTION
White Full Brim Helmet
The MSA 475369 White Full Brim Helmet is a comfortable
shell and suspension unit that offers lightweight protection
with limited resistance to top impact and penetration. The
design of the shell is attractive which will assist with woker
acceptance of this helmet. The shell of this helmet is made
from a lightweight polyethylene while the full brim offers extra
coverage at the sides and the back of the neck.
The V-Gard hard caps have the Fas-Trac ratchet suspension
which allows for the hat to be adjusted by a knob while being
worn to fit 4 different sizes. This hard hat can be adjusted fo fit
sizes 6 1/2 to 8.
Replacement Hard Hat Suspension is available from MSA as
the 473332 Ratchet Adjustment Suspension.
Color
Manufacturer: MSA
Head
Protection
White Slotted Helmet
The MSA 475358 White Slotted Helmet is a comfortable shell
and suspension unit that offers lightweight protection with
limited resistance to top impact and penetration. The design of
the shell is attractive which will assist with woker acceptance
of this helmet. The shell of this helmet is made from a lightweight
polyethylene and is slotted so accessories such as hearing
protection, can be mounted on the cap.
The V-Gard slotted hard caps have the Fas-Trac ratchet
suspension which allows for the hat to be adjusted by a knob
while being worn to fit 4 different sizes. This hard hat can be
adjusted fo fit sizes 6 1/2 to 8.
Color
Manufacturer: MSA
Part Number: 475358
Blue Full Brim Helmet
The MSA 475368 Blue Full Brim Helmet is a comfortable shell
and suspension unit that offers lightweight protection with
limited resistance to top impact and penetration. The design of
the shell is attractive which will assist with woker acceptance
of this helmet. The shell of this helmet is made from a lightweight
polyethylene while the full brim offers extra coverage at the
sides and the back of the neck.
sizes 6 1/2 to 8.
Color
Manufacturer: MSA
Part Number: 473332
87
HEAD PROTECTION
Color
HEAD PROTECTION
Red Full Brim Helmet
MSA hardhats
The MSA 475371 Red Full Brim Helmet is a comfortable shell and
suspension unit that offers lightweight protection with limited
resistance to top impact and penetration. The design of the
shell is attractive which will assist with woker acceptance of
this helmet. The shell of this helmet is made from a lightweight
polyethylene while the full brim offers extra coverage at the
sides and the back of the neck.
These MSA 475365 hard hats are the number one hard hat for
most industrial applications. The shell is made with a durable
injection-molded, high-density polyethylene. These MSA
hardhats come with either the Staz-OnTM (pin-lock) suspension
or the Fas-TracTM (ratchet) suspension for superior head
protection. In addition, this MSA cap is designed with an
accessories slot to accommodate many add-on features.
sizes 6 1/2 to 8.
Specifications:
• Rigid shell with high dielectric strength is balanced for all-day
wearing comfort.
• Fas-TracTM suspension and Staz-OnTM suspension systems
include headband, nape strap. CushionaireTM sweatband
and adjustable crown straps.
• Complies with ANSI Z89.1, 2003, Type 1 Class E & G Standards.
• Cap comes in three sizes: small (6-7 1/8), standard (6 ½-8) and
large (7 ½-8 ½).
Manufacturer: MSA
Part Number: 473332
Yellow Full Brim Helmet
The MSA 475366 Yellow Full Brim Helmet is a comfortable
shell and suspension unit that offers lightweight protection
with limited resistance to top impact and penetration. The
design of the shell is attractive which will assist with woker
acceptance of this helmet. The shell of this helmet is made
from a lightweight polyethylene while the full brim offers extra
coverage at the sides and the back of the neck.
sizes 6 1/2 to 8.
Color
Color
Thinsulate Insulated Orange Hat
Size:
Manufacturer:
Part Number:
One
Occunomix
1092
Detail:
100% acrylic shell, 100% thinsulate lining. Needle out
cap with cuff. 100 grams
Color
Manufacturer: MSA
Part Number: 475366
Insert for Baseball Style
Bump Cap
Poly/Cotton BASEBALL CAP
BUMP CAP
Size: One Size
Part Number: V410
Manufacturer:
Part Number:
Occunomix
V400
Detail:
Polyethylene (PE) Shell Cap Insert encircles top, front
and both sides of head to protect against bumps and
scrapes, secures easily in our Vulcan Baseball Caps,
includes corresponding holes for cooling ventilation and
foam padding against head to enhance comfort.
Color
88
Detail:
Getting workers to wear protection is
often half the battle, especially in work
environments where hard hats are
not required. Importantly, a survey by
the Bureau of Labor Statistics (BLS)
recorded that one-third (1/3) of impact
injuries to the head were suffered by
workers who bumped into stationary
objects when not wearing any head
protection.
That’s why OccuNomix created the
sporty style, fun to wear, Baseball Cap
Bump Cap “BCBC” with solid PE Cap
Insert. The outer Poly/Cotton Baseball
Cap is a one size fits all, high profile,
6 panel design with top of cap holes
for cooling air flow. Inside, a separate
hard plastic Polyethylene (PE) Shell
Cap Insert encircles top, front and both
sides of head to protect against
bumps and scrapes, secures
easily in our Vulcan Baseball
Caps, includes corresponding
holes for cooling ventilation and
foam padding against head to
enhance comfort. The PE Insert
is also sold separately so workers
can secure it into their favorite
“high profile” or “pro-style”
constructed baseball cap. Plus,
there are no replacement parts.
Color
Ideal for work areas such as
food/beverage processing, meat
packing,
warehousing,
auto
repair, home inspection, various
types of mechanical work, meter
reading or pest control, where
blows to back of head are not an
issue.
Not ANSI Compliant.
89
HEAD PROTECTION
HEAD PROTECTION
Thinsulate Insulated
Yellow Hat
Size:
Manufacturer:
Part Number:
One
Occunomix
1091
Detail:
100% acrylic shell, 100% thinsulate lining.
Beanie, 40 grams
Color
Gallet F1SF Helmet,
Photo luminescent
• Purpose-built helmet features polyamide shell, reinforced
impact-absorbing padding for unsurpassed protection
• Integrated eye screen and face shield for a variety of applications
• Interfaces for attachment of SCBA mask, lamps and
communication systems
• Fire-resistant neck curtain increases protection against fire and
flames
• Customizable front plate
Color
CE marking according to PPE directive 89/686 Approved to EN
443:2008, type B Including optional requirements (depending on
model): Very low temperature (-30ºC), Chemical products (C),
Extended protection area (3b), Surface electrical insulation (E3)
Faceshield according to EN14458:2004 MED certified for use on
Ships
Manufacturer:
Product Code: Heat Stress
Prevention
MSA
GAA2121100000-BH35 - white / JD35 yellow
/ RE35 red
FR balaklava
Helly Hansen Flame Retardant One Layer Himmelbjerg
Balaclava prewashed material, Heat resistant flameproof
one layer fabric reduces damage and improves safety
in the workplace. Functional flame resistant first layer
Balaclava is suited to work in a factory, constuction site,
offshore or in a job where, for example, heat electric arc
or static electricty pose a risk. Protects against naked
flames, hot surfaces and radiation heat. Flame retardant
ISO 14116, Antistatic EN1149-5.
Features:
• 48.5% wool/48.5 FR viscose/3% inox 200g • Insulating
marino wool • Extra soft but durable • Moisture
transportingNaturally antibacterial
Manufacturer:
Product Code: 90
Occunomix
79867
HEAT STRESS PREVENTION
MiraCool® Bandana
America’s #1 Cooling Bandana. Simply hydrate in cool
water for a few minutes, then wrap around neck.
The MiraCool® bandana is simple, effective and
reusable.
Available in many 100% cotton colors, patterns,
assortments, money saving bulk packs plus flame
retardant fabric.
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
940
MiraCool® Super Bandana
This super-sized Bandana holds 20% more water than the
Deluxe MiraCool® Bandana. Designed with two channels in
back for even distribution of cooling and made with heavier
weight cotton fabric for maximum durability and strength.
To fasten, simply slip one tie end through other tie end with
three button holes. Button holes allow for varying neck sizes.
The MiraCool® Super Bandana stores water so it can last for
many days without rehydration. Ideal for very dry environments.
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
947
America’s #1 Cooling Bandana. Simply hydrate in cool
water for a few minutes, then wrap around neck.
The MiraCool® bandana is simple, effective and
reusable.
Available in many 100% cotton colors, patterns,
assortments, money saving bulk packs plus flame
retardant fabric.
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
940
MiraCool® Cooling Poncho Vest
MiraCool® Cooling Poncho Vest w/Reflective
Smaller, economical version of our MiraCool® Cooling vest.
MiraCool® crystals retain the coolness of cool water and
work over lightweight shirt to continuously release cooling
sensations which are carried throughout the body.
Completely reversible, if cooling sensations diminish. Renew
and refresh coolness by turning vest inside out. Adjustable side
straps.
100% cotton fabric. Size: Regular fits mans jacket size up to 46
American/56 European.
Size: Reg
Manufacturer:
Part Number:
OCCUNOMIX
902R
Color
MiraCool® Deluxe Bandana
MiraCool® Hard Hat Pad
Longer and wider than the classic MiraCool® Bandana,
the Deluxe Bandana holds 70% more cool water for
enhanced evaporative cooling.
Designed for hard to reach, hard to cool workers heads, when
wearing hard hats. Just minutes in cool water, then fasten
to hard hat suspension using the hook and loop straps. Air
movement around the suspension does the rest to enhance
cooling evaporation.
Designed with two channels in back for even distribution
of cooling.
92
MiraCool® Collar Bandana
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
945
Available economy bulk packs.
Note: Does not interfere with any hard hat safety standards.
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
968
Color
93
MiraCool® Deluxe Hard Hat Pad
with Neck Shade
The same easy to insert top of head cooling effect as our
popular MiraCool® Hard Hat Pad #968 with the added
benefit of a sun protecting neck shade.
Size: Manufacturer:
Part Number:
One Size
OCCUNOMIX
969
Color
Hard Hat Shade
OccuNomix Hard Hat Shade: Fits almost every hard hat.
Blocks sun and most UV rays. Facilitates perspiration
evaporation. Helps keep workers comfortable.
Size: Manufacturer:
Part Number:
MiraCool® Terry Hard Hat Liner
A 2-in-1 cooler and perspiration absorber.
At the top is a built-in, water activated MiraCool® pad for
cooling. The sides are soft, 100% cotton terry that cradles your
head while wicking away annoying perspiration.
Liner attaches easily to hard hat suspension with hook and loop
straps.
Size: One Size
Color
Comes in cotton.
Protects against red neck syndrome. Patent #379,679
One Size
OCCUNOMIX
898
PCCS Phase 1 FR Vest w/Pair
Cooling Packs
When heat stress poses a serious threat, or when an employee has
suffered a heat stress condition, PCCS delivers a serious solution. Vest
fabric Proban FR7A Blue, creates a microclimate that keeps cooling
against body in and keeps extreme environmental heat out. Vest
includes PCP1 Pair of PCCS Cooling Packs, one for front and one for
back of vest.
Maintains 65° Fahrenheit/18° Celsius Cooling that lasts 2-3 hours.
Duration may vary with conditions.
Shirt Style. Approx. 3.5lb, includes more than 20” Reflexite®. One size
fits most with hook and loop adjustments at shoulders and hook and
loop horizontal closures. Often preferred by women.
Replacement cooling packs and outer vest also sold separately.
Color
Manufacturer:
Part Number:
OCCUNOMIX
919
Color: Blue with Reflexite, Hi-Viz Yellow Trim
Size: One Size
Manufacturer:
Part Number:
MiraCool® Terry Hard Hat Band
Wear wet or dry, you decide. MiraCool® Terry Hard Hat Band
combines one side being cotton to promote cooling from water
activated MiraCool® Crystals encased within. The other side
is soft, absorbent, cotton terry to act like a thirsty sweatband
when worn dry.
Terry Cooler Hard Hat Band fastens easily around suspension
with hook and loop straps for a comfortable fit.
Size: Color
94
Manufacturer:
Part Number:
OCCUNOMIX
PC1
Terry Toppers® Headband
Extra wide and extra thick, 12mm cotton terry headband. Made
of double napped (both sides) cotton terry plus a middle layer
super absorbent and durable foam sponge.
Elastic band in the rear delivers a one size fits all, self adjusting,
comfortable fit. Reversible.
Machine washable.
One Size
Size: One Size
OCCUNOMIX
918
Manufacturer:
Part Number:
OCCUNOMIX
885
Color
95
Summer Liner with Neck Shade
Super absorbent double layered, double napped (both sides)
cotton terry plus a layer of foam around the rim catches profuse
perspiration. Installs instantly with four hook and loop straps. A
small elastic strip in the rim enhances fit.
Terry Toppers™ Summer Liners can be worn without a hard
hat!! Wear inside-out as a cool cotton, lightweight, absorbent
cap. Blocks sun and keeps perspiration off face and head.
Machine washable.
Color
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
892
Terry Toppers® Deluxe Hard Hat
Sweatband
Absorbent comfort for hard hat wearers! Double napped (both
sides) cotton terry plus a middle layer durable foam sponge.
12mm thick. Installs in an instant with insulated metal stays - no
fumbling with snaps.
One size fits almost every hard hat. Patent #5,826,279.
Reversible.
Machine washable.
Color
Size: One Size
Manufacturer:
Part Number:
OCCUNOMIX
882
Hearing
Protection
Terry Toppers® Snap-On
Sweatband for Headgear
Our thirsty and thrifty, plush not scratchy, 100% supersorbing soft terry cotton snap-on sweatband really soaks the
competition!
Terry Toppers Snap-On Sweatband absorbs without needing
to be washed first. Why bother workers with washing
before wearing? Save up to 25% or more versus well-known
competitive brands.
Easy snap-on application. Helps headgear fit more securely. No
foam middle.
Machine washable.
Packed in 1\’s, 20\’s or 100\’s.
Color
96
Size:
One Size
Manufacturer:
Part Number:
OCCUNOMIX
870
HEARING PROTECTION
HEARING PROTECTION
Sordin Left/Right
Laser Lite Single-Use (Corded)
Division: Head Protection
Family: Hearing Protection
Range: Earplugs
Line: Disposable Earplugs
100/box
Manufacturer:
HOWARD LEIGHT by SPERIAN
Part Number:
3301106
Division: Head Protection
Family: Hearing Protection
Range: Earplugs
Line: Disposable Earplugs
100/box
aims for improved comfort and protection, enhancing the
Manufacturer:
MSA
Left / Right Helmet and Headband
Mounted NRR
• the left cup is different from the RIGHT
• cups are large enough to fit all ears
• headbands contour to the head’s actual curves
Left / Right Ear Muffs novel design is so unusual that we’ve
even patented (pending) our ideas. Left/Right Ear Muffs
Manufacturer:
HOWARD LEIGHT by SPERIAN
Part Number:
3301105
caps, providing more space for the outer ear. The design
attenuation range and level hearing protection.
Laser Lite Single-Use Earplug
(Uncorded)
98
A comfortable headset that has left and right individual ear
will change the way we understand hearing protection.
Manufacturer:
MSA
Part Number:
10087429
99
HEARING PROTECTION
HEARING PROTECTION
MSA Economuff Multi-Position
Earmuff / Headband / Slotted Caps
• Designed to fit comfortably under safety hard hats
and faceshields, these earmuffs provide aggressive
protection in low-moderate noise environments.
• Features spring design for low pressure, (3) wearing
positions, excellent grip for ease of adjustment, easyto-remove ear cushions, and unique molded inserts for
excellent noise attenuation.
• Weight 8.7 oz. Tested to ANSI S3.19-1974.
Manufacturer:
MSA
Part Number:
10061535/-229/-230/-271/-272/-273
Tri-Seal Reusable Silicone Ear Plugs
(corder) in dispenser box
Made from soft, comfortable silicone, Tri-Seal™ Reusable
Ear Plugs are easy to put in and take out. They come in a
convenient dispenser box (suitable for wall hanging) of
100 individually packaged pairs. NRR-25dB.
Properties:
• 100 per box
• Ruggedly designed, made of soft, comfortable silicone
• Easy to insert in the ear and economical
• Offer protection comparable to many MSA earmuffs
• Dispenser boxes of 100 individually packaged pairs
(Suitable for wall hanging)
• Corded, NRR-25dB
Manufacturer:
Part Number:
MSA
10005607MSA
Respiratory
Protection
Leightning L3Hs Helmet Earmuff
Steel wire construction stands up to daily use and abuse
without compromising comfort. Padded foam headband
and super soft ear cushions eliminate “squeezing
pressure” on the head. Patented Air Flow Control™
technology for optimal attenuation across all frequencies
and snap-in ear cushions for easy maintenance. Capmounted styles include pair of adapters. Tested to ANSI
S3.19-1974. NRR: 25, Color: Dark Gray
Manufacturer:
Part Number:
100
Howard Leight By Sperian
1011992
RESPIRATORY PROTECTION
Select Grain Driver
NIOSH Approved, Class 95 Particulate Respirator, Two
Latex Free Straps, Adjustable Aluminum Nose Piece,
Polyethylene Nose Pad
20pcs. per box
Manufacturer:
Part Number:
Cordova
NX95
Nuisance Dust Mask
Nuisance Dust Mask, Two Elastic Straps, Adjustable
Aluminum Nose Piece, For General Purpose Use, Not
NIOSH Approved
Manufacturer:
Part Number:
Foldable Particulate Respirator
Ultra-Twin Respirator
NIOSH Approved, Class 95, Flat Folded Particulate
Respirator, Continuous Latex Free Strap, Adjustable
Encapsulated Wire Nose Piece
20pcs. per box
Crafted to provide a secure fit and strong protection, Ultra-Twin FullFacepiece Respirators offer several options that make it a clear choice
for defense against toxic chemicals. The unit features an inturned lip for a
comfortable seal against the face, a large chin cup for easy positioning, and
5 suspension headstraps with roller buckles that hold the facepiece in place
while minimizing hair entanglement. The wide lens is scratch resistant,
while a speaking diaphragm provides clear short-range communications.
The unit also features a nosecup that helps eliminate lens fogging.
Manufacturer:
Part Number:
Cordova
NXF95
• Feature an inturned lip, large chin cup, and 5 headstraps with roller
buckles for secure, comfortable fit
• Speaking diaphragm provides clear communications
• Nosecup reduces lens fogging
Manufacturer: MSA Select Grain Driver
Foldable Valved Particulate Respirator
NIOSH Approved, Class N95, Flat Folded, Valved
Particulate Respirator, Continuous Latex Free Strap,
Adjustable Encapsulated Wire Nose Piece
20pcs. per box
Manufacturer:
Part Number:
Cordova
NXF95V
Valved Particulate Respirator
NIOSH Approved, Class N95, Valved Particulate
Respirator, Two Latex Free Straps, Adjustable Aluminum
Nose Piece, Polyethylene Nose Pad
20pcs. per box
102
Cordova
CDM1
Sizes:
One Size Fits Most
Manufacturer:
Part Number:
Cordova
NX95V
Part Number: 471286
3S Full Face Mask
• Over 50 versions for your convenience
• Available in standard and small sizes
• Several versions of harnesses: rubber, silicone, Nomex
EZ-don, adapters for mask-helmet-combinations
• Lens variants coated in polycarbonate & Triplex glass,
also for high mechanical and chemical resistance
• Broad range of accessories
• Also available as mask-helmet-combination
Manufacturer:
Part Number:
MSA
D2055000
Respirator CartriDges
Filter cartridges protect against dusts, particles and
mists. Chemical cartridges protect against gases and
vapors. Combination cartridges deliver protection from
both particulate and gaseous contaminants. Most
cartridges are incinerable.
Manufacturer:
Part Number:
MSA
815357, 815366, 815182, 464033, 464031, 815178, 464046, 492790, 815355, 815369, 815356
103
OptimAir® 3000 PAPR
Full Face Respirator
• Smart, ergonomic design packages motor blower,
cartridges and battery on user’s back
• Microprocessor-controlled, variable-speed motor
provides optimal amount of air to user
• Unit is available in three configurations OptimAir 3000,
OptimAir 3000A and OptimAir 3000 EX
• Standard blower weighs less than 1.5 kg
• Audible and visual alarms for low flow indication and
low battery voltage
• NiMH battery can operate for more than 8 hours
(depending on the configuration)
• Each facepiece comes with three peel-away windows,
six respirator wipes and a storage bag
• Oral nasal cup reduces fogging and lessens dead air
space
• Chin cup helps to position the facepiece properly
• Hard-coated polycarbonate lens affords an over 200°
field of vision
• North 5400 Series Full Facepieces are compatible with
all North cartridges, filters and accessories
Manufacturer:
Part Number:
MSA
10049558
S-Cap-Air, 15 min
The S-Cap-Air is a hooded constant flow, breathing
apparatus to escape from areas in which toxic substances
or oxygen deficiency may occur. Simply open the unit,
don the hood and make your escape.
• Visual warning indicator
• Fast automatic activation
• Self-explanatory operation and donning
• Very comfortable inner mask and neck seal
• Superior field of view through the large hood visor
Approvals & Standards
• EN 1146
• Duration: 15 minutes.
• SOLAS approved for use aboard ships.
Manufacturer:
Part Number:
MSA
10017668
Airhawk II Air Mask 35/45/60
mins cylinder
Built upon MSA’s established AirHawk MMR Air Mask
and is a lightweight, durable, and economical SCBA for
many industrial IDLH (immediately dangerous to life or
health) applications.
• Lower-cost options while offering many new choices
not offered with any other industrial SCBA
• Available in both low-pressure and high-pressure
versions
• Pressure-demand apparatus designed to maintain a
slight positive air pressure inside the facepiece during
inhalation and exhalation
Manufacturer:
Part Number:
104
MSA
10049558
Manufacturer:
Part Number:
North
5400
Respirator, Half Mask
Features and Benefits
• Made of an extremely soft non-allergenic elastomer
for comfort and fit. Contoured sealing flange eliminates
discomfort caused by pressure points on facial nerves.
Design of nose area provides excellent comfort and fit.
• Low dead air space improves worker comfort by limiting
re-breathing of exhaled air.
• Direct cartridge to facepiece seal minimizes
replacement parts and simplifies maintenance.
• Three overlapping sizes comfortably fit most users.
• North 5500 Series Half Masks are compatible with all
North cartridges, filters and accessories.
Manufacturer:
Part Number:
North
550030
Multi-Purpose Cartridge + Organic Vapor and Acid Gas cartridge
North Safety Defender Multi-Purpose respirator cartridge for
Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide,
Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide,
Ammonia, Methylamine and Formaldehyde.
These cartridges can be used with any North Safety full or halfface mask respirators.
Package contains 2 cartridges. North respirator masks sold
separately.
Part Number:
North 75SC
North Organic Vapor & Acid Gas respirator cartridge for Organic
Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen
Fluoride and Chlorine Dioxide
Part Number:
Manufacturer:
N75003
North
105
HAND PROTECTION
HAND PROTECTION
Chrome Core™ Cut 5
• Made with SuperFabric® brand material for the highest
cut-resistance available on the market, exceeds ISEA
Level 5
• Oil and abrasion–resistant synthetic leather palm
enhances grip in dry and light oil applications while
providing dexterity to utilize tools and equipment
• Launderable
Sizes:
Manufacturer:
Part Number:
7/S-11/XXL
HexArmor
4032
Chrome Series™ Cut 5 360°
Hand
Protection
cut resistance available on the market- Exceeds ISEA/
CE Level 5 (in noted enhanced areas)
• Synthetic leather palm enhances grip in dry and light
oil applications, while providing dexterity to utilize tools
and equipment
• 360° Level 5 cut resistance
• Launderable
• SuperFabric® brand material knuckle patch adding
extra protection on the back of hand.
Sizes:
Manufacturer:
Part Number:
7/S-12/3XL
HexArmor
4023
Chrome Series™ Cut 5 Impact Hi-Vis
• Made with SuperFabric® brand material for the highest cut
resistance available on the market, exceeds ISEA and CE Level 5
• Back of hand impact protection
• Synthetic leather palm enhances grip in dry and light oil
applications while providing dexterity to utilize tools and
equipment
• Abrasion–resistant PVC dots for maximum grip in oily situations
• Hi-Vis color and reflective tape on back of hand
• Oil resistant
• Launderable
Sizes:
Manufacturer:
Part Number:
7/S-12/3XL
HexArmor
4026
Mechanics+
cut-resistance available on the market, exceeds ISEA/
CE Level 5 (in noted enhanced areas)
• Innovative industrial puncture protection on enhanced
areas from wires, metal, wood, glass
• Synthetic leather palm enhances grip in dry and light oil
applications while providing dexterity to utilize tools and
equipment
• Launderable
Sizes:
Manufacturer:
Part Number:
7/S-12/3XL
HexArmor
4018
107
HAND PROTECTION
HAND PROTECTION
Rig Lizard®
• Durable TP-X™ palm utilizes the
highest-level abrasion resistance
while maintaining oil-resistant
grip.
• Synthetic palm with unique
stitching pattern offers unrivaled
comfort and dexterity.
• Full impact-resistant exoskeleton
with high-performance IR-X™
smash guards provides greater
impact protection than the leading
competitor.
• Additional IR-X™ guard between
thumb and index finger secures
common pinch and catch points.
9000 Series 9012
• Reinforced index finger and thumb
crotch extends glove life.
• Exterior seams implement a double
stitched core-spun thread, adding
further durability and longevity.
• Breathable SlipFit™ cuff adds
comfort and convenience.
• Hi-Vis color scheme increases
visual awareness.
• ISEA Level 3 cut and puncture
protection.
• Machine washable.
Sizes:
Manufacturer:
Part Number:
S-3XL
HexArmor
2021
cut-resistance available on the market, exceeds ISEA/CE
Level 5 (in noted enhanced areas)
• Innovative industrial puncture protection on enhanced
areas from wires, metal, wood, and glass
• Cut-resistant DuPont™ Kevlar® shell with wrinkle rubber
palm coating for exceptional dexterity and feel – ISEA
Level 2/CE Level 5
Sizes:
Manufacturer:
Part Number:
HexArmor
9012
SuperHOG
Mechanics Gloves
• Made with SuperFabric® brand material for the highest cutresistance available on the market- Exceeds ISEA/CE Level 5
• Full coverage puncture protection from wires, metal, glass
• 25% larger than standard HOG for better fit
• Leather covering over palm and fingers for secure grip and
extended durability
• New saddle design for increased puncture-resistance
• Extended gauntlet cuff
• Developed with HOG PPA Velcro system, attaches to Piercan
Polyurethane–Hypalon underglove
• 13” long, can be used with 4–5” cuff rings
Gulfport Mechanics Gloves feature Amara washable synthetic
leather for palm and finger material. Amara: 1) won’t slip, even
when wet, or 2) harden after drying and 3) is not affected by
hydraulic fluids.
Sizes:
Manufacturer:
Part Number:
S-3XL
HexArmor
3189
Top of gloves are made of two-way stretch spandex, padded for a
snug yet flexible and comfortable fit. Reinforced thumb/index web
area delivers increased wear life. Cuffs are adjustable with elastic
and hook and loop closure.
For traffic area safety, Gulfport logos at wrists are reflective.
Sizes:
Manufacturer:
Part Number:
General Search and Duty Glove
S-2XL
OCCUNOMIX
G470
Kevlar Utility
• Highest needlestick–resistance available provided by
the layering of SuperFabric® brand material
• Tested with 25 gauge needles (modified ASTM 1342-05
test)
• Highest level of cut-resistance in enhanced areas,
exceeds ISEA/CE Level 5
• AirMesh™ breathable back of hand with Airprene wrist
band and velcro closure
• Launderable
Designed for construction, mechanic, assembly workers or anyone
handling a utility knife. Hand fitted design for added comfort.
Kevlar® patches are sewn on thumb, thumb-web, palm & fingertips
to reduce abrasion and increase wear life.
Sizes:
Manufacturer:
Part Number:
Sizes:
Manufacturer:
Part Number:
S-3XL
HexArmor
4045
PointGuard™ X
• Highest needlestick resistance available provided by the
layering of SuperFabric® brand material
• Tested using actual 25 gauge needles (modified ASTM
1342-05 test)
• Highest level of cut-resistance on noted enhanced areas,
exceeds ISEA/CE Level 5
• Recommended use as an under-glove solution with
appropriate top-glove combination
• Lightweight spandex shell with elastic wrist support
• Launderable
Sizes:
Manufacturer:
Part Number:
108
S-XXL
S-3XL
HexArmor
6044
Heavy-duty reinforced finger sidewalls. Heavy-duty stretch nylon
for snug fit. Breathable neoprene knuckles with reflective piping.
Thumb design pull tab makes gloves easy to pull on.
Trimmed with Terry to absorb perspiration. Machine washable
Amara. Hook & loop wrist closure. Pairs.
S-2XL
OCCUNOMIX
480W
Full Finger Gel Gloves
Designed with leather front, vinyl padded back plus cools nylon /
spandex on lower back and wrist. V.E.P.P Gel protection covers:
palm, index finger and full thumb.
Optimally Suited For: Medium to heavy industrial power tools.
Keeps full fingers covered in cold weather.
Sizes:
Manufacturer:
Part Number:
S-2XL
OCCUNOMIX
426
109
HAND PROTECTION
GRAIN COWHIDE DRIVERS
Premium Grain Driver
Terry Back AV Gel Gloves
Men’s S-XL
Sizes: Our most popular design. Terry back offers an added benefit
of absorbing perspiration. V.E.P.P. Gel vibration & impact
protection covers palm, index finger and lower thumb.
Optimally Suited For: Impact power tools, sanders, small
power tools.
Sizes:
Manufacturer:
Part Number:
HAND PROTECTION
Premium Grain Cowhide Leather Palm, Unlined, Shirred
Elastic Back, Keystone Thumb
Manufacturer:
Part Number:
Al Asayel
8235
S-2XL
OCCUNOMIX
422
Select Grain Driver
Specialty Sport & Work Gloves
Form fitted design, comfortable for shipping, receiving or
delivery personnel. Super tacky rubberized fingertips and
palm. Polyurethane reinforced web area for better grip and
wear life. Reinforced finger sidewalls, heavy-duty stretch
nylon for snug fit.
Sizes: Men’s S-3XL
Select Grain Cowhide Driver, Unlined, Shirred Elastic Back,
Keystone Thumb
Manufacturer:
Part Number:
Machine washable Clarino. Hook & loop wrist closure with
thumb design pull tab.
Al Asayel
8210A
Select Grain Driver
Neoprene knuckles with reflective piping
Sizes:
Manufacturer:
Part Number:
S-XL
OCCUNOMIX
486W
Sizes: Men’s XS-XL
Select Grain Cowhide Driver, Unlined, Seamless Forefinger,
Shirred Elastic Back, Wing Thumb
Manufacturer:
Part Number:
Al Asayel
1200
High Visibility
Designed for road crew workers, tow truck drivers or any
worker needing higher visibility. Yellow Reflective strip on
Orange Gloves for better day and night visibility. Hand fitted
design for added comfort. Heavy-duty high visibility stretch
nylon. Thumb design pull tab makes gloves easy to pull on.
Machine washable Amara. Hook & loop wrist closure. Pairs
Sizes:
Manufacturer:
Part Number:
110
S-2XL
OCCUNOMIX
483W
Standard Grain Driver
Sizes: Men’s XS-3XL
Standard Grain Driver, Unlined, Shirred Elastic Back,
Straight Thumb
Manufacturer:
Part Number:
Al Asayel
8201
111
HAND PROTECTION
DEERSKIN DRIVERS
deerskin
Economy Grain Driver
Economy Grain Cowhide Driver with Inseam Forefinger,
Unlined, Shirred Elastic Back, Wing Thumb
Manufacturer:
Part Number:
Al Asayel
8220
Standard Grain Driver
Sizes: Men’s XS-3XL
Standard Grain Driver, Unlined, Shirred Elastic Back,
Straight Thumb
Manufacturer:
Part Number:
Al Asayel
8201
Premium Grain Cowhide/
Thinsulate Lined
Sizes:
Men’s S-2XL
Premium Grain Cowhide Driver, Thinsulate Lined, Shirred
Manufacturer:
Part Number:
Al Asayel
8255
Premium Grain Deerskin Driver
Sizes: 9000B: Standard Grain Deerskin Driver, Unlined, Shirred
112
Grain/Split Deerskin Driver
Sizes : Men’s S-XL
Grain Deerskin Driver with Split Deerskin Back, Unlined,
Shirred Elastic Back, Keystone Thumb
Al Asayel
9015
Premium Grain Deerskin/
Thinsulate Lined
Premium Grain Deerskin Driver, Thinsulate Lined, Shirred
Manufacturer:
Part Number:
Al Asayel
9050
Premium Grain Deerskin/
Red Fleece Lined
Sizes : Men’s S-XL
Premium Grain Deerskin Driver with Split Deerskin Back,
Shirred Elastic Back, Keystone Thumb
Manufacturer:
Part Number:
Al Asayel
9060
Premium Grain Goatskin/
Thinsulate Lined
Men’s XS-XL
Premium Grain Deerskin Driver, Unlined, Shirred Elastic
Back, Keystone Thumb
Manufacturer:
Part Number:
HAND PROTECTION
GOATSKIN DRIVERS
Al Asayel
9000
Sizes: Men’s S-2XL
Premium Grain Goatskin Drivers, Thinsulate Lined, Shirred
Manufacturer:
Part Number:
Al Asayel
8550
113
HAND PROTECTION SPLIT COWHIDE LEATHER
Grain Goatskin Leather Palm
GRAIN COW LEATHER PALMS
Premium Grain Leather/
Rubberized Gauntlet
Sizes: Sizes: Men’s Large
Premium Grain Goatskin Leather Palm, Red Canvas Back,
Gunn Pattern, 2.5-inch Rubberized Safety Cuff
Manufacturer:
Part Number:
Al Asayel
8650L
Grain Goatskin/Patch Palm
Men’s XS-XL
Manufacturer:
Part Number:
Al Asayel
8570
8350: Standard Grain Leather Palm, Striped Canvas Back,
Gunn Cut Pattern, Rubberized Gauntlet Cuff (Men’s Large)
Manufacturer:
Part Number:
Manufacturer:
Part Number:
114
Al Asayel
F7250R
Men’s S-XL
Premium, Grain Cowhide Leather Palm, Striped Canvas
Back, Gunn Cut Pattern, 2.5-inch Rubberized Safety Cuff
8305: Standard, Grain Cowhide Leather Palm, Striped
Canvas Back, Gunn Cut Pattern, 2.5-inch Rubberized Safety
Cuff
Al Asayel
8300
PREMIUM
SIDE SPLIT
LEATHER
PALMS
Premium Side/Rubberized Cuff
Select Shoulder Split Cowhide Leather Palm, Unlined, Hi-Vis
Orange Back with Reflective Tape, Rubberized Safety Cuff
with Reflective Tape
Al Asayel
8310
Premium Grain Leather/
Rubberized Cuff
Manufacturer:
Part Number:
Select Shoulder Cowhide/
Safety Cuff
Men’s S-XL
Premium Grain Leather Palm, Striped Canvas Back, Gunn
Cut Pattern, Rubberized Gauntlet Cuff
Sizes: Sizes: HAND PROTECTION
Men’s S-XL
Premium Double Chrome Tanned, Side Split Leather Palm,
Kevlar Sewn, 2.5-inch Rubberized Safety Cuff
7500: Tuff-Cor, Heavy Side Split, Kevlar Sewn, 2.5-inch
Rubberized Safety Cuff
Manufacturer:
Part Number:
Al Asayel
7500A/-10A
115
HAND PROTECTION
PREMIUM SIDE SPLIT LEATHER PALMS
SHOULDER COW LEATHER PALMS
Premium Side/Double Palm
Split Cowhide/Thinsulate Lined
Sizes: Sizes: Men’s M-XL
Premium Double Chrome Tanned, Side Split Double Leather
Palm, Kevlar Sewn, 2.5-inch Rubberized Safety Cuff
7540: Tuf-Cor, Heavy Side Split Double Leather Palm, Kevlar
Sewn, 2.5-inch Rubberized Safety Cuff
Manufacturer:
Part Number:
Al Asayel
7540A
Shoulder Leather, Clute, Knit Wrist
Sizes: Men’s Large
Blue, Waterproof Split Leather Palm, Yellow Canvas Back,
Thinsulate Lined, Gunn Cut Pattern, 2.5-inch Rubberized
Safety Cuff
7465LW: Blue, Waterproof Split Leather Palm, Yellow Canvas
Back, Thinsulate Lined, Gunn Cut Pattern, Convertible Knit
Wrist
Al Asayel
7465
Premium Grain Cowhide Mig/Tig
Sizes:
7122: Ladies Large
8135: Standard Grain Cowhide Mig/Tig Welder, 4-inch
Russet Split Leather Gauntlet Cuff (Men’s S-XL)
Al Asayel
7120
Sizes:
Men’s Large
Al Asayel
8130
Premium Grain Goatskin Mig/Tig
Sizes: M-XL
Shoulder Leather Palm, Striped Canvas Back, Patch Palm
Construction, Knit Wrist, Clute Cut Pattern
Premium Grain Goatskin Mig/Tig Welder, Kevlar Sewn,
4-inch Blue Split Leather Gauntlet Cuff
Al Asayel
7020
Shoulder Leather, Clute,
Knit Wrist
Shoulder Leather Palm, White Canvas Back, Knit Wrist,
Clute Cut Pattern
Al Asayel
7125
MIG/TIG
WELDERS
Men’s M-XL
Premium Grain Cowhide Mig/Tig Welder, Kevlar Sewn,
4-inch Russet Split Leather Gauntlet Cuff
Shoulder Leather, Clute,
Patch Palm
116
Men’s M-XL
Shoulder Leather Palm, Striped Canvas Back, Knit Wrist,
Clute Cut Pattern
HAND PROTECTION
Al Asayel
8530
Premium Goatskin/Band Top
Sizes:
Men’s 7-12
Premium Grain Goatskin Mig/Tig Welder, Split Leather Band
Top, Clute Cut Pattern
Al Asayel
8560
117
HAND PROTECTION
MIG/TIG WELDERS
Premium Side Leather Welder
Sizes: Men’s XL
Premium Side Split Cowhide Welders, Blue, Reinforced
Double Palm, Thumb Guard, Kevlar Sewn, Full Sock Lining,
Fully Welted, Foam Lining
Al Asayel
7610A
Shoulder Leather Welder
Sizes:
Men’s XL
Premium Side Split Leather Welder, Gray, Kevlar Sewn, Full
Sock Lining, Fully Welted
Al Asayel
7650
Sizes:
Men’s XL
Premium Side Split Leather Welder, Reinforced Palm,
Thumb Guard, Kevlar Sewn, Full Sock Lining, Fully Welted
SPLIT COW
WELDERS
Al Asayel
7670
Select Shoulder Leather Welder
Men’s XL
Select Shoulder Cowhide Welders, Blue, Reinforced Palm,
Kevlar Sewn, Straight Thumb
118
Al Asayel
7610
Al Asayel
7625
Sizes: Men’s XL
Shoulder Leather Welder, Russet, Thumb Guard, Kevlar
Sewn, Full Sock Lining
Al Asayel
7635
Select Shoulder Leather Welder
Sizes:
Men’s XL
Select Shoulder Leather Welder, Red, Full Sock Lining
Al Asayel
7630
Sizes:
Sizes: Men’s XL
Shoulder Leather Welder, Black, Reinforced Palm, Kevlar
Sewn, Full Sock Lining
Sizes:
HAND PROTECTION
SPLIT COW WELDERS
Men’s XL
Economy Shoulder Leather Welders, Gray, One-Piece Back,
Full Sock Lining
7602: Ladies Size Large
7600: Economy Shoulder Leather Welders, Gray, Two-Piece
Back, Men’s XL
Al Asayel
7605/7602/7600/-05LH
119
HAND PROTECTION
NEOPRENE COATED GLOVES
Heavy Weight, Black
Jersey Lined/Smooth/Knit Wrist
Sizes:
Large
Sizes:
Supported Neoprene, Heavy Weight, Black, Jersey Lined,
Smooth Finish, Knit Wrist
Al Asayel
5800/5800R
Men’s S & L
Premium Nitrile Supported, Palm Coated, Smooth Finish,
Jersey Liner, Knit Wrist, Treated with Actifresh
6951: Premium Nitrile Supported, Fully Coated, Smooth
Finish, Jersey Liner, Knit Wrist, Treated with Actifresh
Made with FDA Accepted Materials for Food Processing
Applications
Produced in an ISO 9001:2000 Certified Facility
Heavy Weight, Black
Large
Rough Finish, 12-inch
Al Asayel
5812R/5814R
6950R: Premium Supported Nitrile, Palm Coated, Rough,
Jersey Liner, Knit Wrist, Treated with Actifresh
Applications
Produced in an ISO 9001: 2000 Certified Facility
Large
Smooth Finish, 12-inch
Al Asayel
5812/5814/5818
Sizes: S-XL
Supported Neoprene, Medium Weight, Green, Interlock
Lined, Sandy Finish, 12-inch
Applications
120
Al Asayel
6872/6874
Men’s S-XL
Premium Supported Nitrile, Palm Coated, Smooth, Interlock
Lined, Knit Wrist, Treated with Actifresh
6981: Premium Supported Nitrile, Fully Coated, Smooth,
Interlock Lined, Knit Wrist, Treated with Actifresh
Applications
Medium Weight, Green
Al Asayel
6950R/6951R
Interlock Lined/Smooth/Knit Wrist
Sizes: Sizes:
Men’s Large
Premium Supported Nitrile, Fully Coated, Rough, Jersey
Liner, Knit Wrist, Treated with Actifresh
Heavy Weight, Black
Al Asayel
5951/6950
Jersey Lined/Rough/Knit Wrist
Sizes:
Sizes:
HAND PROTECTION
NITRILE DIPPED GLOVES
Al Asayel
6980/6981
Ultralight Interlock/Smooth/
Knit Wrist
Sizes:
Men’s S-XL
Premium Supported Nitrile, Palm Coated, Smooth Finish,
Ultralight Weight Interlock Lined, Knit Wrist, Treated with
Actifresh
Applications
Al Asayel
6990
121
HAND PROTECTION
NITRILE
DIPPED
GLOVES
NITRILE CUT AND SEWN GLOVES
Jersey Lined/Rough/Safety Cuff
Men’s 9-11
Sizes:
Economy Supported Nitrile, Fully Coated, Rough Finish,
Jersey Liner, Safety Cuff
6850R: Economy Supported Nitrile, Palm Coated, Rough
Finish, Jersey Liner, Safety Cuff
Al Asayel
6860R
Solid Back
Sizes: Manufacturer: Part Number:
Al Asayel
6700/6710
Perforated Back
Sizes: Cut & Sewn Nitrile, Brown Nitrile Fabric, Driver’s Style,
Striped Canvas Back
Al Asayel
6740
Smooth PVC/Knit Wrist
Al Asayel
5000
Smooth PVC/12,14 or 18-inch
Black Smooth PVC, Interlock Lining, 12-inch Length
Men’s: 6720 M-XL
Ladies: 6730 S-L
Al Asayel
6720/6730
Perforated Nylon Back
Al Asayel
5012
Rough PVC/12 or 14-inch
Men’s and Ladies
Cut & Sewn Nitrile, Perforated Nylon Back, Slip-On Style
Men’s:
6725 M-XL
Ladies: 6735 S-L
Part Number:
6725/6735
S-2XL
Men’s and Ladies
Cut & Sewn Nitrile, Perforated Back, Slip-On Style
122
Sizes: Black Smooth PVC, Interlock Lining, Knit Wrist
Men’s: 6700 M-XL
Ladies: 6710 S-L
Sizes: NITRILE CUT
AND SEWN
GLOVES
Driver’s Style
Ladies and Men’s Sizes
Cut & Sewn Nitrile, Slip-On Style
HAND PROTECTION
PVC DIPPED GLOVES
Black Rough PVC, Interlock Lining, 14-inch Length
5018R: Black Rough PVC, Interlock Lining, 18-inch Length
Al Asayel
5014R
123
HAND PROTECTION
FOAM LINED PVC DIPPED GLOVES
Etched Finish/18-inch
Black Double Dipped PVC, Etched Finish, Interlock Lining,
18-inch Length
Al Asayel
5118I
Foam Lined/Safety Cuff
Orange Double Dipped PVC, Sandy Finish, Foam Lining,
Safety Cuff
5710F/C: Orange Single Dipped PVC, Smooth Finish, Foam
Lining, Safety Cuff
Men’s Large
Green Double Dipped PVC, Etched Finish, Jersey Lining, Knit
Wrist
Al Asayel
5200J
Green/Etched/10, 12 or 14-inch
Men’s Large
Sizes:
Green Double Dipped PVC, Etched Finish, Jersey Lining,
12-inch Length
FOAM LINED
PVC DIPPED
GLOVES
Al Asayel
5210J/5212J/5214J
Foam Lined/Knit Wrist
Orange Double Dipped PVC, Sandy Finish, Foam Lining, Knit
Wrist
124
Al Asayel
5710F
Foam Lined/12-inch
Green/Etched/Knit Wrist
Orange Single Dipped PVC, Smooth Finish, Foam Lined, 12inch Gauntlet Cuff
Al Asayel
5700G
Foam Lined/Knit Wrist
Tan Double Dipped PVC, Sandy Finish, Foam Lining, Safety
Cuff
Al Asayel
5710T
VINYL
IMPREGNATED
AND VINYL
COATED
GLOVES
Stretch, Impregnated
Sizes: Ladies S - Men’s XL
5700F/C: Orange Single Dipped PVC, Smooth Finish, Foam
Lining, Knit Wrist
Russet Color, Vinyl Impregnated, Stretch Fabric, Slip-On
Style
Men’s: 6000 M-XL
Ladies: 6010 S-L
Al Asayel
5700F
HAND PROTECTION
Al Asayel
6000/6010
125
HAND PROTECTION
VINYL IMPREGNATED AND VINYL COATED GLOVES
Non-Stretch, Impregnated
Sizes: Ladies & Men’s
Yellow, Vinyl Impregnated, Non-Stretch Fabric, Slip-On
Style
Men’s: 6200 M & L
Ladies: 6210 M & L
Al Asayel
6200/6210
Premium, Canvas Lined
Sizes: Large
Premium Supported Latex, Canvas Liner, Smooth Finish,
4-inch Gauntlet Cuff
Vinyl Coated
XS-XL
Yellow, Breathable Vinyl Coating, Seamless Machine Knit
Liner, 10-inch
Al Asayel
6500
Premium, Jersey Lined
Sizes:
Al Asayel
5605
Economy, Canvas Lined
Economy, Canvas Lined
Sizes:
Large
Economy Supported Latex, Canvas Liner, Crinkle Finish,
Safety Cuff
Al Asayel
5610
Al Asayel
5620
Premium/11-mil ou 15-mil/Unlined
UNSUPPORTED
NITRILE GLOVE
7-11
Premium Unsupported Nitrile, Green, Unlined, Embossed
Grip, 11-mil
4430: Standard Unsupported Nitrile, Green, Unlined,
Embossed Grip, 11-mil
Applications
126
Large
Economy Supported Latex, Canvas Liner, Crinkle Finish, Knit
Wrist
Sizes: Sizes: Al Asayel
5615
Large
Premium Supported Latex, Jersey Liner, Crinkle Finish,
Safety Cuff
5600: Premium Supported Latex, Canvas Liner, Crinkle
Finish, Safety Cuff
Applications
Large
Economy Supported Latex, Jersey Liner, Crinkle Finish, Knit
Wrist
5618: Premium, Orange, Supported Latex, Jersey Liner,
Crinkle Finish, Knit Wrist
Made with FDA-Accepted Materials for Food Processing
Applications
RUBBER
COATED
GLOVES
Al Asayel
5625
Economy, Jersey Lined
Sizes: Sizes: HAND PROTECTION
RUBBER COATED GLOVES
Al Asayel
4410
127
HAND PROTECTION
UNSUPPORTED NITRILE GLOVE
Premium/8-mil/Unlined
Sizes: 7-10
Premium Unsupported Nitrile, Blue, Unlined, Embossed
Grip, 8-mil
Applications
Al Asayel
4810
Premium/28-mil/Orange
Sizes: 7-11
Premium Unsupported Nitrile, Green, Flock Lined, Embossed
Grip, 15-mil
4630: Standard Unsupported Nitrile, Green, Flock Lined,
Applications
Al Asayel
4610/4620
M-2XL
Premium Unsupported Nitrile, Green, Unlined, Pebble Grip,
22-mil, 18-inch length
Applications
UNSUPPORTED
NEOPRENE
GLOVES
Al Asayel
4522
Premium Unsupported Neoprene, Black, Flock Lined,
Applications
Al Asayel
4360/S
UNSUPPORTED
LATEX
Natural Canners
Sizes: 7-10
Unsupported Latex Canners, Natural, Embossed Grip, 18-mil
4215N: Unsupported Latex Canners, Natural, Embossed
Grip, 16-mil
Applications
Al Asayel
4210N
4250 R
7-10
Premium Unsupported Neoprene over Latex, Yellow/Blue,
Flock Lined, Embossed Grip, 28-mil
4320: Standard Unsupported Neoprene over Latex, Yellow/
Blue, Flock Lined, Embossed Grip, 19-mil
Applications
128
7-10
Sizes:
Premium/28-mil/Bi-Color
Sizes: Al Asayel
4340
Premium/30-mil/Black
Premium/22-mil/Unlined
Sizes: S-XL
Premium Unsupported Neoprene/Latex Blend, Orange,
Flock Lined, Embossed Grip, 28-mil
Premium/15-mil or 18-mil/Flocked
Sizes: HAND PROTECTION
UNSUPPORTED LATEX
Al Asayel
4250R
Al Asayel
4300
129
HAND PROTECTION
HAND PROTECTION
HIGH PERFOMANCE CUT RESISTANT GLOVES & SLEEVES
Blue Canners
Thermoshield
S-XL
Sizes: Sizes: 7-10
Unsupported Latex Canners, Blue, Embossed Grip, 18-mil
4225B: Unsupported Latex Canners, Blue, Embossed Grip,
16-mil
Applications
Al Asayel
4220B
Thermoshield, Gray/Yellow, 13-Gauge Cut Resistant Shell,
Made with Twaron & Fiberglass with Black Nitrile Palm
Coating
Applications
CE Cut Level 5
Al Asayel
3700
3700 G
Blue Flocked
Sizes: 7-10
3700G
13-Gauge, Gray, Plaited Cut Resistant Shell, Made with
UHMWPE Fiber, Nylon & Spandex with Gray Polyurethane
Palm Coating
CE Cut Level 4
UHMWPE is Ultra High Molecular Weight Polyethylene
Al Asayel
4260
3700
HIGH PERFOMANCE
CUT RESISTANT
GLOVES & SLEEVES
Sizes: XS-XXL
13-Gauge, White Cut Resistant Shell, Made with UHMWPE
Fiber and Nylon with White Polyurethane Palm Coating
CE Cut Level 3
Al Asayel
3700
Sizes: S-XL
Halo, 13-Gauge, White Cut Resistant Shell, Made with
UHMWPE Fiber & Nylon with White Polyurethane Palm
Coating
CE Cut Level 3
Al Asayel
3710
Al Asayel
3700G
Power-Cor
CUT
RESISTANCE
GLOVES
Sizes: S-XL
Power-Cor, 100% Kevlar Shell, 10-Gauge, Blue Crinkle Finish
Latex Coating
Applications
CE-EN388: 3444
Halo
130
Style No. :
Unsupported Latex, Blue, Flock Lined, Embossed Grip, 18mil
4260R: Unsupported Latex, Blue, Flock Lined, Embossed
Grip, 18-mil, Rolled Cuff
Applications
Al Asayel
3050
100% Kevlar/Shell
Sizes: S-L
100% Kevlar, Machine Knit Shell, 7-Gauge, ASTM/CPPT Cut
Level 3: 1118 grams
Al Asayel
3070
131
HAND PROTECTION
HAND PROTECTION
Kevlar-Cotton Plaited/Shell
Sizes: S&L
100% Kevlar/Dots
Sizes: XS-XL
Kevlar/Cotton Plaited, Machine Knit Shell, 7-Gauge, ASTM/
CPPT Cut Level 2: 895 grams
100% Kevlar, Machine Knit Gloves, 7-Gauge, Two Side PVC
Dots, ASTM/CPPT Cut Level 3: 1118 grams
Al Asayel
3060
Spectraguard
Cor-Touch CR
Sizes: S-XL
Cor-Touch CR, Kevlar/Lycra Shell, 15-Gauge, Black,
Textured Nitrile Coating
CE-EN388: 3221
Al Asayel
3055
Sizes: S-XL
Al Asayel
3025
Steel Reinforced
S-L
Sizes:
Power-Cor Plus, 100% Kevlar Shell, 10-Gauge, Green Nitrile
Coating
Applications
CE-EN388: 3544
Seamless, 7-Gauge Machine Knit Shell, Made with Synthetic
Fibers and Stainless Steel
Made with FDA Accepted Materials for use in Food Contact
Applications
CE Cut Level 5
ASTM/CPPT Cut Level 5, 5937 Grams
Al Asayel
3052
Power-Cor Leather
Sizes:
Sizes:
XS-XL
S-XL
Power-Cor
100% Kevlar
10-Gauge,
Green Nitrile
Coating
Power-CorPlus,
Leather,
100%Shell,
Kevlar
Shell, 7-Gauge,
Premium
Made with FDA Accepted Materials for Food Contact Applications
Side
Split
Leather
Palm
with
Kevlar
Stitching
CE-EN388: 3544
132
S-XL
7-Gauge, Seamless Machine Knit Shell, Made with
Spectraguard Fiber (Spectra + Fiberglass)
Applications
CE Cut Level 5
ASTM/CPPT Cut Level 4, 3006 Grams
Power-Cor Plus
Sizes: Al Asayel
3075
Al Asayel
3035
NYLON PALM
COATED
GLOVES
Cor-Touch Grey/Black
Sizes:
S-XL
CE-EN388: 244X
3095: Economy
Plaited Kevlar/Cotton Shell with
Manufacturer:
Version:
Al Asayel
Part
Number:
3052
Shoulder
Leather Palm
White, 13 Gauge Nylon with Gray, Flat Nitrile Palm Coating
Applications.
CE-EN388: 4121
Al Asayel
3090
Al Asayel
6890
133
HAND PROTECTION
HAND PROTECTION
Cor-Touch Foam
Natural/Dots
Sizes: Sizes:
Sizes:
XS-XL
S-XL
Power-Cor
Leather,Nylon
100% Kevlar
Shell,Black
7-Gauge,
Premium Side
Split
Gray 13-Gauge,
Shell with
Micro-Foam
Nitrile
Leather Palm with Kevlar Stitching
Palm
Coating
CE-EN388: 244X
3095: Economy Version: Plaited Kevlar/Cotton Shell with Shoulder
CE-EN388:
4121
Leather Palm
Manufacturer:
Part Number:
Al
Al Asayel
Asayel
3090
6893
Natural, Medium Weight, 7-Gauge, Poly/Cotton, Two Side PVC Dots
3805: Same with One Side Dots
3855P: Standard Weight, 7-Gauge, Poly/Cotton, Two Side Dots
3805P: Standard Weight, 7-Gauge, Poly/Cotton, One Side Dots
3851: Economy Weight, 7-Gauge, Poly/Cotton, Two Side Dots
3801: Economy Weight, 7-Gauge, Poly/Cotton, One Side Dots
3856: Standard Weight, Fingerless, Two Side Dots
3855G: Gray, Standard Weight, Two Side Dots
Standard White or Grey Nylon/
White or Grey PU (Cor-Touch Lite)
Sizes: S-XXL
CE-EN388: Manufacturer: Part Number:
4131
Al Asayel
6895C
S-XXL
Standard, Black, 13-Gauge Nylon Shell with Black
Polyurethane Coating
CE-EN388: 4131
COATED
STRING KNIT
GLOVES
S&L
Al Asayel
3880
Solid Screen Palm Coated
Sizes: S&L
Natural, Medium Weight, 7-Gauge, Poly/Cotton, Black PVC
Screen Palm Coated
3875: Fingerless, Poly/Cotton, Black PVC Screen Palm
Coated
3860: Natural, 10-Gauge, 100% Cotton, Blue Nitrile Screen
Palm Coated
Bleached/Dots
Sizes: 134
Al Asayel
6896C
S&L
Natural, Medium Weight, 7-Gauge, Poly/Cotton, Two Side,
Blue PVC Blocks
3881: One Side, Blue PVC Blocks
Standard Black Nylon/Black PU
Sizes: Al Asayel
3855
Natural/Blocks
Sizes: Standard, White, 13-Gauge Nylon Shell with White
Polyurethane Coating
S&L
Al Asayel
3870
Criss-Cross
Sizes: S-XL
Bleached, Medium Weight, 7-Gauge, Poly/Cotton, Two Side
PVC Dots
3800: One Side PVC Dots
Premium, Orange, Heavy Weight, Poly/Cotton/Nylon, Soft,
Clear, Criss-Cross PVC Coating
3900G: Gray Shell with Clear Criss-Cross PVC Coating
Al Asayel
3850
Al Asayel
3900
135
HAND PROTECTION
HAND PROTECTION
Gray Shell/Gray Latex/Cor-Grip II
Sizes: S-XL
Economy, Gray, 10-Gauge Poly/Cotton Shell with Gray
Crinkle Finish Latex Coating
Applications
Cor-Grip
Sizes: Cor-Grip, Standard, Yellow, 10-Gauge Poly/Cotton Shell with
Blue Crinkle Latex Coating
Applications
CE-EN388: 2142
CE-EN388: 2142
Al Asayel
3897
Al Asayel
3894
Gray Shell/Blue Latex
Sizes: S-XL
Economy, Gray, 10-Gauge Poly/Cotton Shell with Blue
Crinkle Finish Latex Coating
Applications
CE-EN388: 2142
Al Asayel
3898
Therma-Cor
Sizes: CE-EN388: 3131
Al Asayel
3899
Therma-Viz
Sizes: Sizes: S-XL
Economy, Natural, 10-Gauge Poly/Cotton Shell with Blue
Latex Coating
Al Asayel
3893
CE-EN388: Cor-Grip
S-XL
S-XL
Thema-Viz, Hi-Vis Green, 10-Gauge, Brushed, Loop-In,
Acrylic/Cotton/Polyester, Terry Shell with Blue Crinkle
Finish Latex Coating
Applications
Sizes: S-XL
Therma-Cor, Premium, Gray, 10-Gauge, Loop-In, Brushed,
Acrylic/Cotton/Polyester Terry Shell with Gray Crinkle Finish
Latex
Applications
Natural Shell/Blue Latex
136
S-XL
3131
Al Asayel
3889
Cold Snap
Sizes: S-XL
Cor-Grip, Premium, Gray, 13-Gauge Poly/Cotton Shell with
Blue Crinkle Finish Latex Coating
Applications
Cold Snap, Premium, Green, Brushed, Loop-In, 7-Gauge,
Acrylic Terry Shell with Black Foam Latex Coating
Applications
CE-EN388: 2142
Al Asayel
3896
Al Asayel
3999
137
HAND PROTECTION
UNCOATED STRING KNIT GLOVES
Natural, Poly/Cotton
Sizes: S-XL
Terry/Loop-Out
Natural, Medium Weight, 7-Gauge, Poly/Cotton
3410: Standard Weight, 7-Gauge, Poly/Cotton
3411: Economy Weight, 7-Gauge, Poly/Cotton
3480: Heavy Weight, 7-Gauge, Poly/Cotton
Premium, 24-ounce Terry, Loop-Out, Knit Wrist
3224: Standard, 24-ounce Terry, Loop-Out, Knit Wrist
3218: Economy, 24-ounce Terry, Loop-Out, Knit Wrist
3218G: Gray, Economy, 24-ounce Terry, Loop-Out, Knit Wrist
Al Asayel
3400
TERRY CLOTH
GLOVES
Natural, Fingerless
Sizes: S-L
Natural, Standard Weight, 7-Gauge, Poly/Cotton, Fingerless
Al Asayel
3412
Sizes:
S-XL
Multi-Color, Medium Weight, 7-Gauge, Blended Yarns
3160: Heavy Weight, 7-Gauge, Blended Yarns (S & L)
3115: Extra Heavy Weight, 7-Gauge, Blended Yarns (S & L)
Al Asayel
3100
Al Asayel
3255
Terry/Loop-In
Sizes:
Men’s S & L
Standard, Seamless, Loop-In Terry, Integrated Knit Wrist
3214GI: Gray, Standard, Seamless, Loop-In Terry,
Integrated Knit Wrist
Al Asayel
3214I
Terry/Dots
S-L
Bleached White, Medium Weight, 7-Gauge, Poly/Cotton
3520: Standard Weight, 7-Gauge, Poly/Cotton
3185WL: Heavy Weight, 7-Gauge, Poly/Cotton
3413N: Standard Weight, 100% Nylon, 13-Gauge
3510: Standard Weight, 100% Polyester, 7-Gauge
One Size Fits All
Standard Weight, Loop-Out Terry Sleeve, 15-inch Length
3258: Standard Weight, Loop-Out Terry Sleeve, 18-inch
Length
Bleached, Poly/Cotton
Sizes: Al Asayel
3224/P
Terry Sleeve
Multi-Color
138
HAND PROTECTION
TERRY CLOTH GLOVES
Al Asayel
3500
14-ounce, Seamless, Loop-In Terry, Two Side Black PVC
Dots, Integrated Knit Wrist
Al Asayel
3220DD
139
HAND PROTECTION
COTTON CANVAS GLOVES
JERSEYS
Brown Jersey
Sizes: Canvas/Heavy Weight
Large
Premium, Men’s, 9-ounce Brown Jersey, Clute Cut, Knit
Wrist
1402: Ladies
1400C/1402C: Mens & Ladies Premium, Brown Jerseys,
100% Cotton
1410C/1412C: Mens & Ladies Standard Brown Jerseys
1400RC/1402RC: Mens & Ladies Ramie/Cotton Brown
Jerseys
1430: Mens, 12-ounce Brown Jerseys
Please ask about our complete range of Jersey Gloves
Al Asayel
1400C
Premium, 12-ounce Cotton Canvas, Clute Pattern, Knit Wrist
2200: Standard, 12-ounce Cotton Canvas, Clute Pattern, Knit
Wrist
2100: Standard, 10-ounce Cotton Canvas, Clute Pattern Knit
Wrist
2100CD: Standard, 10-ounce, Corded Cotton Canvas, Clute
Pattern, Knit Wrist
Canvas/8-ounce
140
Yellow Full Chore, Quilted Palm and Back, Knit Wrist
Al Asayel
2318
Yellow Single-Ply Chore
Yellow Single-Ply Chore, Red Knit Wrist
Al Asayel
2320
Yellow Chore/Canvas Back
Men’s Large
Standard, 8-ounce Cotton Canvas, Clute Pattern, Black PVC
Dots, Knit Wrist
2602: Ladies, 8-ounce Cotton Canvas, Black PVC Dots, Knit
Wrist
2610: 10-ounce Cotton Canvas, Black PVC Dots, Knit Wrist
2612: Ladies, 10-ounce Cotton Canvas, Black PVC Dots, Knit
Wrist
2640: 12-ounce Cotton Canvas, Black PVC Dots, Knit Wrist
Men’s Large
Al Asayel
2680
Canvas/Black PVC Dots
8-ounce Cotton Canvas, Clute Pattern, Orange PVC Dots,
Knit Wrist
2650: 12-ounce Cotton Canvas, Orange PVC Dots, Knit Wrist
2640K: 12-ounce Cotton Canvas, Orange PVC Dots, Kevlar
Stitching, Knit Wrist
2670: 10-ounce Cotton Canvas, Orange PVC Dots, Orange
Knit Wrist
COTTON
CHORES
Yellow Full Chore
Al Asayel
2000
Canvas/Orange PVC Dots
Al Asayel
2200C
Men’s Large
Premium, 8-ounce, Cotton Canvas, Clute Cut, Knit Wrist
2000V: Standard, 8-ounce, Cotton Canvas, Clute Cut, Knit Wrist
2002: Ladies, Standard, 8-ounce, Cotton Canvas, Clute Cut, Knit
Wrist
2000R: Standard, 8-ounce, Cotton Canvas, Reversible, Knit Wrist
2000W: Standard, 8-ounce, Cotton Canvas, Wing Thumb, Knit Wrist
2000RW: Standard, 8-ounce, Ramie/Cotton Canvas, Wing Thumb,
Knit Wrist
2000B: Standard, 8-ounce, Cotton Canvas, Clute Cut, Band Top
Sizes: HAND PROTECTION
COTTON CHORES
Al Asayel
2608
Yellow Chore, Quilted Palm, Canvas Back, Safety Cuff
2316: Yellow Chore, Quilted Palm, Canvas Back, Knit Wrist
2316G: Yellow Chore, Quilted Palm, Canvas Back, Plasticized
Gauntlet Cuff
Al Asayel
2316S
141
HAND PROTECTION
HAND PROTECTION
Double Palm/Nap-Out
Cotton Canvas Double Palm, Nap-Out, Quilted Palm, Band
Top
2410: Double Palm, Nap-Out, Quilted Palm, Knit Wrist
2450: Double Palm, Nap-Out, Quilted Palm, Gauntlet Cuff
Al Asayel
2400
Double Palm/Red Knit Wrist
Cotton Canvas Double Palm, Nap-In, Quilted Palm, Red Knit
Wrist
24201: Double Palm, Nap-In, Quilted Palm, Blue Knit Wrist
142
Al Asayel
24101
Harnesses
& Lanyards
HARNESSES & LANYARDS
Workman Harness, Quick-Fit
Chest and Leg Straps, Standard
The Workman Harness provides comfortable protection,
due to its lightweight components and durable webbing.
The vest-style harness, with optional hip D-Rings for work
positioning, fits a wide range of body types and sizes. Colorcontrasting thigh and torso straps simplify donning.
Features:
• Economical
• Abrasion-resistant, strong, durable webbing
• Yellow polyester webbing for high visibility
• Web retainer collars to keep excess webbing neat
• Easy to don and adjust
• Choice of Qwik-Fit™ or Tongue-Buckle leg straps for easy
adjustment
Manufacturer: MSA
Workman Harness, Quick-Fit Chest
and Tongue Leg Straps, Standard
Size: Standard
Back D-Ring: Yes
Hip D-Ring (s): No
Leg Buckles: Tongue
Chest Strap: Qwik-Fit
The vest-style harness, with optional hip D-rings for work
positioning, fits a wide range of body types and sizes. Colorcontrasting thigh and torso straps simplify donning. Other
features include: optimum quality at an economical price,
abrasion-resistant, comfortable, strong, durable webbing,
yellow polyester webbing for high-visibility, web retainer
collars to keep excess webbing neat, easy to don and
adjust. Choice of Qwik-Fit or Tongue-Buckle leg straps.
Meets OSHA regulations, ANSI A10.32 & ANSI Z359.1 and is
certified to CSA Z259.10-M90.
Manufacturer: MSA
Standard Quick Fix Back Harness
Harness provides comfortable protection, due to its
lightweight components and durable webbing. The veststyle harness, with 3D-Ring attachment points at back and
hip for work positioning, fits a wide range of body types
and sizes. Color-contrasting thigh and torso straps simplify
donning.Meets OSHA regulations, ANSI A10.32 & ANSI
Z359.1, and are certified to CSA Z259.10-M90. Chest strap
& Leg Buckle; Quik-Fit. Applications: Agriculture. Asbestos
Abatement, Chemical, Construction Electric Utility, Mining,
Nuclear, Oil and Gas, Paper & Pulp, Spray Painting, Welding.
This Standard Quick Fix Back Harness is one of many top
quality items in our Fall Protection Devices department.
Manufacturer: MSA
Workman Harness, Quick-Fit Chest
and Tongue Leg Straps, Standard
Size: XLarge
Back D-Ring: Yes
Hip D-Ring (s): No
Leg Buckles: Tongue
Chest Strap: Qwik-Fit
The vest-style harness, with optional hip D-rings for work
positioning, fits a wide range of body types and sizes. Colorcontrasting thigh and torso straps simplify donning. Other
features include: optimum quality at an economical price,
abrasion-resistant, comfortable, strong, durable webbing,
yellow polyester webbing for high-visibility, web retainer
collars to keep excess webbing neat, easy to don and
adjust. Choice of Qwik-Fit or Tongue-Buckle leg straps.
Meets OSHA regulations, ANSI A10.32 & ANSI Z359.1 and is
certified to CSA Z259.10-M90.
Manufacturer: MSA
144
145
Workman Harness Vest StaNdard
Size D-Ring Back, D-Ring Hips
Features:
• Size Group=Standard, Connection Type=D-Ring Back,
D-Ring Hips, Fastening Method=Qwik-Fit?
Chest Strap, Tongue Buckle Legs, Color=Yellow,
Material=Polyester, Testing and Approvals:
Meets OSHA regulations, ANSI A10.32 & ANSI Z359.1, and
is certified to CSA
Manufacturer: MSA
Workman Harness Vest D-Ring
Back, D-Ring Hips X-Large
Features:
• Size Group=X-Large, Connection Type=D-Ring Back, D-Ring Hips,
Fastening Method=Qwik-Fit? Chest Strap, Tongue Buckle Legs,
Color=Yellow, Material=Polyester, Testing and Approvals: Meets
OSHA regulations, ANSI A10.32 & ANSI Z359.1, and is certified to
CSA Z
Manufacturer: MSA
Workman Construction-Style Full Body Harness,
Tongue Leg/Qwik-Fit Chest Buckles, Size: Standard
Lightweight and comfortable, the economical Workman
Construction-Style Harness has a maximum capacity of
400 lbs. Construction workers love this harness because
it includes a removable tongue-buckle tool belt, and an
integral back pad for added comfort during work positioning.
• Made with strong, abrasion-resistant polyester webbing
with a minimum breaking strength of6,000 lbs.
• The 1-3/4”-wide webbing is bright yellow for high visibility.
• Web retainer collars keep excess webbing from becoming
a problem.
• Thigh and torso straps are in contrasting colors, so donning
is easy.
• Back D-ring (standard) and side D-rings (optional) are
zinc-plated, stamped-alloy steel with a minimum breaking
strength of 5,000 lbs. (proof-tested to 3,600 lbs.).
• Comes with a Qwik-Fit™ chest strap and tongue-buckle
leg straps for easy adjustment.
• Meets all applicable OSHA standards, including 1910.66
and 1926.502, plus ANSI A10.32 and Z359.1, and CSA
Z259.10-M90, classes A and P.
Manufacturer: MSA
Lanyard Sa Workman 2lc
Snap Tieback
Features:
• Connection Type=LC, Color=Yellow, No. of Legs=1,
Type=Tie-Back, Testing and Approvals: Meets ANSI
Z359.1, ANSI A10.32, applicable OSHA regulations, and
is certified to CSA Z256.11-05 E4
• Tear-tape design to keep fall arrest forces below 900 lbs
• Adjustable configurations
Manufacturer: MSA
Tongue Buckle, Hip D-Ring,
Shoulder Pads, Standard
• The Workman Construction Harness provides comfortable
protection, due to its lightweight components and durable
webbing.
• The vest style harness, with optional hip D-rings for work
positioning, fits a wide range of body types andsizes.
• Integral backpad for added comfort during work positioning with
a removable, tongue buckle tool belt.
• Color-contrasting thigh and torso straps simplify donning.
• Other features include abrasion-resistant, durable yellow
polyester webbing for high visibility and web retainer collars to
keep excess webbing neat.
• Tongue buckle leg straps make for easy adjustment.
• Meets all applicable OSHA requirements and “ANSI standards
including ANSI A10.32 and ANSI Z359.1
Manufacturer: MSA
146
Double Leg, Tie-Back Lanyard
Tear-tape design to keep fall arrest forces below 900 lbs
Adjustable configurations
Specifications
• Connection Type : LC
• Color : Yellow
• No. of Legs : 2
• Type : Tie-Back
Manufacturer: MSA
147
Lanyard 6’ Workman 2lc Snap
Adjustable
Features:
• Connection Type=LC, Color=Yellow, No. of Legs=1,
Testing and Approvals: Meets ANSI Z359.1, ANSI A10.32,
applicable
OSHA regulations, and is certified to CSA Z256.11-05 E4
Manufacturer: MSA
Lanyard Sa Workman 1lc Gl3100
SnapAdjUst
Features:
• Connection Type=LC/GL3100, Color=Yellow, No. of Legs=2,
Tesing and Approvals: Meets ANSI Z359.1, ANSI A10.32,
applicable OSHA regulations, and is certified to CSA
Z256.11-05 E4
Fire Safety
Manufacturer: MSA
TechnaCurv Vestype Harness
The MSA TechnaCurv Full Body Harness offers features
never before seen in a full-body harness including a
Curvilinear comfort system, Visco-Elastic shoulder padding,
Secure-Fit buckles, Sorbtek fabric on the shoulder and subpelvic pads and an innovative web design. The TechnaCurv
Full Body Harness by MSA is designed with downward
adjusting torso straps on most models to ease fitting. This
vest-style MSA TechnaCurv harness has the following
features:Qwik-Fit chest buckleTongue leg buckles1 back
D-ringLightweight design for increased comfortMeets all
applicable OSHA regulations and ANSI Z359.1CSA certified.
Manufacturer: MSA
148
FIRE SAFETY
FIRE SAFETY
Fire Extinguisher, Halotron, 2.5 Lb
Fire Extinguisher, Class K, 6 Liter
Fire Extinguisher, Halotron, UL Rating 2-B: C, Size 2.5 Lb., Cylinder
Material Steel, Operating Pressure 100 PSI, Height 13.33 In, Dia. 3.33
In, Handle Type Aluminum, Valve Material Aluminum, Bracket Type
Wall Hook, Rechargeable, Features Bilingual Labels, UL Listed,
Includes Bracket
Fire Extinguisher, Class K Wet Chemical, UL Rating 1-A: K, Size 6
Liter Lb., Cylinder Material Stainless Steel, Operating Pressure 100
PSI, Height 19.25 In, Dia. 7 In, Handle Type Stainless Steel, Valve
Material Plated Brass, Bracket Type Wall Hook, Rechargeable,
Features Bilingual Labels, UL Listed, Includes Bracket
Manufacturer:
Part Number:
BUCKEYE
70259
Manufacturer:
Part Number:
Fire Extinguisher, ABC, 5 Lb
Fire Extinguisher, ABC Dry Chemical, UL Rating 3-A: 40-B: C, Size
5 Lb., Cylinder Material Steel, Operating Pressure 195 PSI, Height
16.33 In, Dia. 4.25 In, Handle Type Aluminum, Valve Material
Aluminum, Bracket Type Wall Hook, Rechargeable, Features
Bilingual Labels, UL Listed, Includes Bracket
Manufacturer:
Part Number:
BUCKEYE
10914
Fire Extinguisher, ABC Dry Chemical, UL Rating 4-A: 80-B: C, Size 10
Lb., Cylinder Material Steel, Operating Pressure 195 PSI, Height 21
In, Dia. 5.12 In, Handle Type Aluminum, Valve Material Aluminum,
Bracket Type Wall Hook, Rechargeable, Features Bilingual Labels,
UL Listed, Includes Bracket
Manufacturer:
Part Number:
BUCKEYE
11340
Fire Extinguisher, ABC Dry Chemical, UL Rating 20-A: 120-B: C,
Size 20 Lb., Cylinder Material Steel, Operating Pressure 195 PSI,
Height 21.25 In, Dia. 7.50 In, Handle Type Aluminum, Valve Material
Aluminum, Bracket Type Wall Hook, Rechargeable, Features
Bilingual Labels, UL Listed, Includes Bracket
Manufacturer:
Part Number:
BUCKEYE
12120
Wet Chemical Stored Pressure Class
“K” Kitchen Extinguishers 6 Liters
WET CHEMICAL extinguishers
are the best restaurant kitchen
appliance hand portable fire
extinguishers you can purchase.
Both have been tested and
approved for the new Class
K listing by UL specifically for
restaurant kitchen hazards.
They contain special potassium
acetate based, low PH agent
developed for use in preengineered restaurant kitchen
systems. The recent trend to more
efficient cooking appliances and
use of unsaturated cooking oils
3
dictates the use of a hand portable fire
extinguisher with greater fire fighting
capacity and cooling effect to combat
these very hot and difficult fires.
The Model B260 is the ideal “KITCHEN
USE”
fire
extinguishers.
They
supplement existing cooking equipment
automatic system protection for an extra
margin of safety.
Manufacturer:
Part Number:
Amerex
B260
Stored Pressure Class “K” Kitchen
Extinguishers 2 1/2 Gal
WET CHEMICAL extinguishers
are the best restaurant kitchen
appliance hand portable fire
extinguishers you can purchase.
Both have been tested and
approved for the new Class
K listing by UL specifically for
restaurant kitchen hazards.
They contain special potassium
acetate based, low PH agent
developed for use in preengineered restaurant kitchen
systems. The recent trend to more
efficient cooking appliances and
use of unsaturated cooking oils
dictates the use of a hand portable fire
extinguisher with greater fire fighting
capacity and cooling effect to combat
these very hot and difficult fires.
The Model B262 is the ideal “KITCHEN
USE”
fire
extinguishers.
They
supplement existing cooking equipment
automatic system protection for an extra
margin of safety.
Manufacturer:
Part Number:
Amerex
B262
Class D Stored Pressure
Dry Powder Extinguisher
For Combustible Metal Fire
MODEL B570 contains a specially blended Sodium Chloride based
dry powder extinguishing agent. Heat from the fire causes it to cake
and form a crust excluding air and dissipating heat from burning
metal. Metal fires involving magnesium, sodium, potassium and
sodium-potassium alloys can be successfully extinguished with
this extinguisher. There is data showing that zirconium, uranium,
titanium, and powdered aluminum fires can be controlled and
extinguished with this unique extinguisher.
Manufacturer:
Part Number:
150
BUCKEYE
50006
Amerex
B570
151
FIRE SAFETY
FIRE SAFETY
Halotron 1 Fire Extinguisher
- AMEREX 11 lb
Features:
• Dependable drawn steel cylinders
• All metal valve construction
• EPA approved “Clean Agent” for Class A, B, and C hazards
• Low GWP (Global Warming Potential)
• Low ODP (Ozone Depletion Potential)
• Short Atmospheric lifetime
• Leaves no residue
• Maximum visibility during discharge
• No electrical conductivity back to the operator
• No thermal or static shock
• Bar coded and bi-lingual labels
Manufacturer:
Part Number:
Manufacturer:
Part Number:
Aluminum bottle. Amerex ABC or Multi-Purpose fire extinguishers
utilize a specially fluidized and siliconized mono ammonium
phosphate dry chemical.
The ABC Dry Chemical Fire Extinguisher, Models B456 (10 lb. w/
aluminum valve) is the hallmark for quality in the fire extinguisher
industry. Rugged steel cylinders and stored pressure design are just
a couple features of this ABC or multipurpose extinguisher, which
contains a specially fluidized and silicon zed monoammonium.
Amerex
B456
Alarm, Combination
Combination Smoke and Carbon Monoxide Alarm, Powered
By Three AA Batteries, No Battery Backup, No Exit Light,
Hush Button, With Voice Message Warning System,
Adjustable Mounting Bracket Included
Manufacturer:
Part Number:
“ABC” DRY CHEMICAL RECHARGE
MONOAMMONIUM PHOSPHATE PAILS
Manufacturer:
Part Number:
Manufacturer:
Part Number:
Ionization Smoke Alarm, Exit Light No, Hush Button No, 9
Volts Battery, Ionization, Test Button, Power Light
BUCKEYE
61000
Manufacturer:
Part Number:
KIDDE
0915E
Smoke Alarm
Ionization Smoke Alarm, Battery Backup 9 Volts, Exit Light
No, Hush Button No, 120 VAC Wire In, Interconnectable
Wire, Power Light
BUCKEYE
61400
Manufacturer:
Part Number:
KIDDE
900-0102-02
Smoke Alarm
“ BC” DRY CHEMICAL RECHARGE
SODIUM BICARBONATE
152
BUCKEYE
50285G
Amerex
397
ABC Dry Chemical Fire Extinguisher
Manufacturer:
Part Number:
Buckeye AFFF
3
KIDDE
1275E
153
FIRST AID
FIRST AID
First Aid Cabinets
Part Number: R234-135 FAC-5 - Door Pouch 22/Pockets
Part Number: R209-082 FAC-5 - Cabinet - 5 Shelf - Empty 28”
x 19” x 6”
Manufacturer: CERTIFIED SAFETY
Guardian G1512 10 Gallon Portable
Eyewash/Drench Hose
First Aid
Application: Self-contained eyewash and/or drench hose units are
ideal where a continuous supply of potable water is not available.
These units may be used in low traffic areas, low hazard areas or
where installation of plumbed equipment is not cost effective. Ten
gallon units provide approximately 8.3 usable gallons (31.4 liters)
of water for effective rinsing of eyes, face or body. Note that,
under ANSI Z358.1-2004, drench hose units supplement but do
not replace other types of emergency equipment.Tank: 10 gallon
stainless steel pressurized tank. Tank has built-in carrying handles,
air intake fitting, pressure gauge and pressure relief valve. Tank has
approximately 8.3 gallons (31.4 liters) usable capacity
Manufacturer: Guardian Equipment
Part Number: G1512
G1902 SAFETY STATION
WITH EYEWASH
Application: Combination eyewash and shower safety station.
Two GS-Plus™ spray-type outlet heads deliver a flood of water
for rinsing eyes.Shower head: 10” diameter orange ABS plastic.
Shower valve: 1” IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and Teflon® seals.
Furnished with stainless steel actuating arm and 29” stainless steel
pull rod.Spray head assembly: Two GS-Plus™ spray heads. Each
head has a “flip top”dust cover, internal flow control and filter to
remove impurities from water.
Sign: Furnished with ANSI-compliant identification sign.
Quality assurance: Valve and spray head assemblies are
factoryassembled and water tested prior to shipment.
Part Number: G1902
G1814 EYEWASH, WALL MOUNTED
Application: Eyewash for wall mounting. Two GS-Plus™
spray-type spray heads deliver a flood of water for rinsing
eyes.Spray head assembly: Two GS-Plus™ spray heads.
Each head has a “flip top” dust cover, internal flow control
and filter to remove impurities from the water flow.Valve:
1/2” IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and Teflon® seals.
Bowl: 11 1/2” diameter stainless steel.Mounting: Heavy duty
cast aluminum wall bracket with corrosion resistant powder
coated finish.Sign: ANSI-compliant identification sign.
Part Number: G1814
155
FIRST AID
FIRST AID
G1562 15 GALLONS
PORTABLE EYEWASH
Eye Wash Station 16 Oz. or 32 Oz.
Application: Self-contained eyewash and/or drench hose
units are ideal where a continuous supply of potable water
is not available. These units may be used in low traffic
areas, low hazard areas or where installation of plumbed
equipment is not cost effective. Fifteen gallon units provide
approximately 10 usable gallons (37.9 liters) of waterfor
effective rinsing of the eyes, face or body. Note that, under
ANSI Z358.1-2009, drench hose units supplement but do
not replace other types of emergency equipment.Tank:
15 gallon stainless steel pressurized tank. Tank has builtin carrying handles, air intake fitting, pressure gauge and
pressure relief valve. Tank has approximately 10 gallons
(37.9 liters) usable capacity.
Unit Size: 16 oz.
Pieces Per Package: 2 Bottles
Height: 16”
Width: 12”
Depth:
4”
Manufacturer: Certified Safety
Part Number: K611-018
Part Number: G1562
G1796 WIDE AREA EYE/FACE WASH
Application: Free standing, pedestal mounted WideArea™
eye/face wash. Constructed entirely in PVC and PVC-coated
brass. Ideal for use in industrial environments where harsh
acids or caustics are present. Four GS-Plus™ spray-type
outlet heads deliver a flood of water over a wide area of
coverage for complete rinsing of eyes and face.Spray
head assembly: Four GS-Plus™ spray heads. Each head
has a “flip top” dust cover, internal flow control and filter
to remove impurities from the water flow.Pipe and fittings:
Schedule 80 PVC.Sign: ANSI-compliant identification sign.
Quality assurance: Unit is completely assembled and water
tested prior to shipment.
Part Number: G1796
The Guardian G2010 is a completely stainless steel eye
wash and shower safety station contained in a stainless
steel booth with single entry and modesty curtain (10 oz.
class 1 clean room approved material). This product is ideal
for areas that contain sensitive equipment that cannot be
splashed with water, as the booth and curtain contain water
from emergency shower while keeping the rest of the room
dry. It is particularly useful in clean rooms with perforated
floors and in applications where retention/isolation of the
rinse water is required.
32 oz.
Pieces Per Package: 1 Bottle
Height: 11”
Width: 13”
Depth:
4”
Tank: 16 gallon capacity safety green polyethylene tank. Tank has
built-in carrying handle, heavy wall construction, and reinforced
ribs to support weight of unit. Sprayhead Assembly: Water flow is
activated by pulling down on bright yellow eyewash tray. Integral
full flow nozzles deliver soft spray of water. Swing tray up to
storage position to stop flow. Drain: Waste water is directed into
drain opening in tank basin. 3 ft. long drain hose in basin directs
discharge into floor drain, storage tank, or other receptor. Mounting:
Furnished with epoxy coated steel bracket for mounting unit on
wall. Unit can also be placed on countertop or other flat surface.
Preparation: Top operate unit, fill unit with clean potable water and
add bacteriostatic additive (supplied with unit). Additive protects
against growth of bacteria, fungus, algae, and acanthamoeba. Unit
should be inspected regularly and water in unit should be changed
at least once every six months. Discharge time: Eyewash delivers
0.7 gallons per minute (GPM) for 15 minutes.
Part Number: G1540
G2010 ALL STAINLESS STEEL EYEWASH
AND SHOWER SAFETY STATION
Eye Washing Station
Unit Size: G1540 AQUAGUARD 16 GALLON
Manufacturer: Certified Safety
Part Number: K611-030
Part Number: G2010
156
3
157
GAS DETECTION
GAS DETECTION
ALTAIR Maintenance-Free Single-Gas
Detector (Carbon Monoxide CO)
The ALTAIR Single-Gas Detector features sensor options for
carbon monoxide, hydrogen sulfide and oxygen and will operate
for over two years maintenance free, This long lifespan, coupled
with the unit›s high performance, results in one of the most costeffective single-gas detectors on the market. Advanced design
offers superior dust and water protection and high resistance to
RFI. Rubberized housing and one-button operation provide the
durability and ease of use users expect from MSA instruments.
Alarm System
The triple-alarm system featuring two bright flashing LED’s a
piercing audible alarm, and a vibrating alarm ensures that no alarm
condition goes unnotices.
• 95dB audible alarm (distinct sounds for High and Low Alarms)
• Dual LED’s positioned to be seen from all angles
• Standard vibrating alarm and standard event logging
Gas
Detection
Durability Features
• Hard polycarbonate case, encapsulated in a thick rubberized shell
• Extremely resistant to drops and impacts
• Rated to IP67 protection levels for dust/water ingress
Manufacturer: MSA
Detector (Hydrogen Sulfide H2S)
with the unit›s high performance, results in one of the most costeffective single-gas detectors on the market. Advanced design
Alarm System
• Dual LED›s positioned to be seen from all angles
Durability Features
Manufacturer: MSA
159
GAS DETECTION
GAS DETECTION
Detector (Oxygen O2)
ALTAIR 5X Multigas Detector
with the unit’s high performance, results in one of the most costeffective single-gas detectors on the market. Advanced design
The rugged, multi-featured ALTAIR 5X Multigas Detector boasts
several options that provide maximum safety and make it easy to
use in even the most demanding situations. It features large buttons
for easy use, and its polycarbonate housing protects the detector
for drops of up to 10 feet. The detector also boasts the exclusive
MotionAlert™, which lets others know if the user has become
immobile, and InstantAlert™, a manual alarm that alerts others if a
dangerous situation has arisen. The glow-in-the-dark housing makes
it easy to see in a confined space, while the large buttons and bright
display makes operation possible even when the user is wearing
gloves.
Alarm System
• Dual LED’s positioned to be seen from all angles
Durability Features
Manufacturer: MSA
ALTAIR 4X Multigas Detector
The ALTAIR 4X Multigas Detector surpasses industry standards in
several crucial areas. Its four-year sensor life is 60% longer than
the industry average, while its 24-hour run time exceeds the industry
average by 71%. This versatile portable detector is a perfect match for
industries ranging from fire fighting to welding, and its digital sensor
output makes it less likely to suffer from RF interference. The unit
features exclusive MotionAlert™, which lets others know if the user
has become immobile, and InstantAlert™, a manual alarm that alerts
others of potentially dangerous situations. This rugged unit is designed
to withstand a drop of up to 20 feet and uses less than half as much
calibration gas as the industry average.
Features:
•Dependable multigas detector tests for LEL, oxygen, carbon
monoxide and hydrogen sulfide
•Economical construction saves users more than 50% on calibration
gas, replacement sensors and maintenance
•Four-year sensor life means detector lasts 60% longer than the
industry average
•Unit uses 50% less calibration gas per minute than the average
detectors within the industry
•Two-tox CO/H2S sensor removes practically all cross-channel
interference
•Large buttons and high-contrast screen make operation easy in lowlight conditions
•Ribbed rubber housing provides secure grip and high durability
•Unit features 95+ db alarm and ultra-bright LEDs
•Exclusive end-of-sensor warning cautions user when unit’s sensor
needs to be changed
•MotionAlert option tells others that user has become immobile
InstantAlert provides manual alarm to alert others of a dangerous
situation
Manufacturer: MSA
160
• Rugged detector tests levels of LEL, oxygen, carbon monoxide,
hydrogen sulfide and sulfur dioxide
• Rapid bump test gives results in under 15 seconds
• Versatile MSA Link™ allows user to transmit data to a computer
• MotionAlert option tells others that user has become immobile
• InstantAlert provides manual alarm to alert others of a dangerous
situation
• Large buttons and bright display provide easy operation, even
when user is wearing gloves
• Durable XCell sensors last longer than 3 years• Strong glow-in-thedark housing protects detector for drops of up to 10 feet
• Exclusive end-of-sensor warning cautions user when unit’s sensor
needs to be changed• Polycarbonite housing is both dust-tight and
water-tight
Manufacturer: MSA
ALTAIR PRO Single-Gas Detector
•Gas concentration (ammonia, carbon monoxide, chlorine, chlorine
dioxide, hydrogen cyanide, hydrogen sulfide, nitrogen dioxide,
phosphine and sulfur dioxide) or percent oxygen displayed on a
large, clear, backlit LCD
•Unit detects Co, H2S, O2, NH3, Cl2, ClO2, NO2, SO2, HCN and PH3
•Automatically records the last 50 alarm/test events while
simultaneously recording peak gas readings or low O2 readings
every three minutes in a periodic data log
•User can read data or change alarm set points by connecting unit
to MSA Link via built-in IR communication port
•Adjustable alarm set points
•No-miss quad alarm system includes bright flashing LEDs,
piercing audible alarm, LCD notification, and an internal
vibrating alarm
•Rubberized armor housing and one-button operation for maximum
durability and simplicity
•Easy alarm check, bump check, fresh air zero, and calibration
•Easily replaceable batteries and sensors
Manufacturer: MSA
Part Number:
10074135 SINGLE GAS DETECTOR:PKGD,ALTAIR PRO,CO
10074136 SINGLE GAS DETECTOR:PKGD,ALTAIR PRO,H2S
10074137 SINGLE GAS DETECTOR:PKGD,ALTAIR PRO,O2
10076716 A-ALTPRO-7-0-0-0 [CL2]
10076730 A-ALTPRO-C-0-0-0 [NH3]
10076731 A-ALTPRO-B-0-0-0 [NO2]
10076733 A-ALTPRO-F-0-0-010076736 A-ALTPRO-A-0-0-0 [SO2]
161
GAS DETECTION
GAS DETECTION
ULTIMA XE Gas Detector
The Ultima XE Gas Monitor offers the latest in mechanical and
electrical technologies for the continuous gas monitoring of
combustible and toxicgases, as well as oxygen deficiency.
HART Field Communications Protocol provides increased
sensor data, part of cost-effective asset management.
HART also provides convenient setup,calibration, and
diagnostics. Calibrate, set up or perform diagnostics with
HART from any point along the 4-20mA line. HART allows for
existing component install and wiring to be used, reducing
installation costs.
• Explosion-proof 316 stainless steel.
• Multiple-entry mounting enclosure.
• Type 4X, IP66.
Manufacturer: MSA
Part Number: ULTIMA XE-(CAT)LELULTIMA XE-H2SULTIMA
XE-TOXIC
ULTIMA XIR Gas Detector
The Ultima XIR Gas Monitor offers:
• DuraSource Technology for improved IR sensor life.
• 316 stainless steel.
• Multiple-entry mounting enclosure.
• Fast response time.
• Operation based on dual-wavelength, heated-optics
technology,providing definitive compensation for
temperature, humidity, and aging effects.
• IR technology for excellent long-term stability, eliminating
theneed for frequent calibrations.
• Sintered disk-free design for optimum performance in
harsh environments.
• No-gas calibration; only zero adjustment is requiredfor full
calibration.
• Type 4X, IP66 rating.
Manufacturer: MSA
Part Number: ULTIMA XE-IR LELULTIMA XE-IR CO2
162
Galaxy Automated Test System
The GALAXY® Automated Test System is the simplest way
to test MSA instruments. No user intervention, computer, or
network interface required—just place the instrument in the
test stand and the GALAXY performs the test automatically.
Or view data of a network-enabled GALAXY on any Web
browser. Test capabilities include calibration and bump
check records, due date for instrument calibration, and the
ability to directly email MSA support.
• Completely standalone-no user intervention, computer, or
network interface required
• Optional network interface available for wired (Ethernet)
networks
• Available for Solaris® Multigas Detector, Sirius® Multigas
Detector, ALTAIR® Single-Gas Detector, and ALTAIR® Pro
Single-Gas Detector
Manufacturer: MSA
Part Number: GALAXY-ALT4-STD
Galaxy STD Altair 4 for 4 Gas, Regulator 1 Cylinder Holder
Global Charger
GALAXY-ALT5-STD Galaxy STD Altair 5 for 4 Gas, Regulator
1 Cylinder Holder Global Charger
Evolution TIC 5800
Delivering High Sense quality even in high temperatures,
the EVOLUTION 5800 Thermal Imagine Camera offers
best-in-class image quality from four times the picture
elements (compared to previous TIC designs). A 3.5” display
makes multi-user viewing easier. Displays twice the Low
Sensitivity image quality in the 320° to +1000° F range, for
high-quality imaging. Backed by an industry-first two-year
Camera Warranty.
• Unparalleled imaging-twice the low Sensitivity and image
quality in the 320° to +1000°F range.
• High sensitivity with high-image definition over the widest
temperature range-up to 320°F compared to competitors’
<200°F
• 3.5” display for increased multi-user viewing
• Standard 2x digital zoom
• Consistent operation with earlier models to simplify
training
• Two-year camera warranty-best in the industry
Manufacturer: MSA
163
CABINETS
CABINETS
Mass 50 II trolley system
The MSA MASS trolley systems are an insulating and
non-autonomousPersonal Protective Equipment (as it
depends on a hose supplying breathable air to the user) for
respiratory protection, independent from the environmental
atmosphere.
• Works inside tanks
• Cleaning of basins containing sewage sludge
• Firemen for rescue interventions in contaminated
environments, for example in tunnel, ships, wells, to the
aid of people unable to move,by using them, if necessary,
as air supply with anti-contamination overalls provided
with a air supply hose
Manufacturer: MSA
Part Number: M0018642 - 2 x 9ltr Cylinders, c/w 40mtr Air
Hose M0023267 - 1 x 50ltr Cylinder, c/w 40mtr Air Hose
M0023268 - 2 x 50ltr Cylinders, c/w 40mtr Air Hose
FLAMMABLE STORAGE SAFETY CABINETS
Cabinets
Keep flammable liquids near work areas in Eagle Safety
Storage Cabinets. All are constructed of 18-gauge steel.
Sides, top, bottom, and doors are double-walled with a 1
1/2” air space between walls. Both vents, with 2” threaded
fittings, have fire baffle and cap. Cabinets come in yellow
high gloss powder finish with red warning, plus grounding
attachment, 3-point key lock, and 2” raised, leakproof door
sill. Each shelf is adjustable, supported by 4 brackets, and
can support 350 pounds.
Manufacturer: Eagle
Part Number: 1900 - 2 gal./17.5”x18”x17.25”/66 lbs.
1903 - 4 gal./17.5”x18”x22.5”/74 lbs.
1924 - 12 gal./23”x18”x35”/126 lbs.
1905 - 16 gal./23”x18”x44”/152 lbs.
3010 - 30 gal./43”x18”x44”/231 lbs.
4610 - 48 gal./23”x34”x65”/315 lbs.
6410 - 60 gal./43”x34”x44”/327 lbs.
9010 - 90 gal./43”x34”x65”/434 lbs.
ACID / CORROSIVE SAFETY CABINETS
For use in storing small containers up to 5-gallon capacity of
flammable and non-flammable acids and corrosive liquids.
All interior and exterior surfaces, including shelves, are
finished with blue epoxy powder coating.This type finish
is superior to epoxy painted or enamel painted surfaces.
Powder coating gives superior protection against chemical
attack in event of a spill or splash. For additional protection,
each cabinet is supplied with high density polyethylene trays
for the shelves and bottom of cabinet.Not recommended for
use with Sulfuric, Nitric or Hydrochloric Acid.EAGLE Poly
Acid-Corrosive Cabinets are suitable for use with these
acids.
Metal cabinets meet NFPA Code 30 and OSHA requirements.
Manufacturer: Eagle
Part Number: CRA
165
CABINETS
CABINETS
PAINT & INK SAFETY CABINETS
FM approved cabinets for safely and securely storing and
organizing paint and ink cans. These cabinets include all the
features of other Eagle cabinets and are available in red and
yellow with additional shelves to maximize storage space. Capacity
is based on the number of 1 gallon paint containers the cabinet
will hold.• Galvanized steel shelves, adjustable on 4.75” centers,
support 350 pounds.
CEP’s spill kits are perfect for any and all disaster preparedness
situations.They contain the finest quality products for oil only or
universal spill controland are fully customizable!
• Galvanized steel leveling legsInternal and external welded 18
gauge steel double wall panel construction with 1.5” air space
• 2” raised leakproof sill
• 2” vent with fire baffle and cap
• Ground connectionNew 30 Gallon models are designed to store
30 - 1 gallon paint cans or 252 - 12oz. aerosol cans.
• 10 - Universal Sorbent pads
• 4 - Universal Booms 5”x10’
• 2 - Pair Goggles
• 2 - Pair Nitrile Gloves
• 1 - Disposable Coverall
• 1 - AM/FM Radio
• 4 - Batteries
• 1 - Disposable Bag
Available in red and yellow finishes with manual or self-closing
doors.
See tables below for model numbers and specifications.
Meet OSHA and NFPA Code 30 Specifications
Self-closing models meet UFC 79
Manufacturer: MSA
Part Number: PI
PESTICIDE SAFETY CABINETS
Eagle PEST cabinets provide needed protection for companies
who specialize in lawn care, golf course management, agricultural
interests or who handle and store pesticides and poisons.
• Galvanized steel shelves, adjustable on 4.75” centers, support
350 pounds.
• Galvanized steel leveling legs
• Internal and external welded 18 gauge steel double wall panel
construction with 1.5” air space
• 2” raised leakproof sill
• 2” vent with fire baffle and cap
• Ground connection
• Lead free high gloss polyester hybrid baked on finish
• 3 point key lock doors
• Large FLAMMABLE - KEEP FIRE AWAY and PESTICIDES label.
• Metal cabinets meet NFPA Code 30 and OSHA requirements.
Manufacturer: Eagle
Part Number: PEST
DRUM STORAGE SAFETY CABINETS
Keep 55 gallon drums close to your work area and safely contain
flammable liquids or hazardous waste. EAGLE drum cabinets give
you the choice between horizontal or vertical drum storage. The
vertical cabinets are available for one or two drums and feature a
convenient half shelf for additional storage space for accessories
or containers. Drum storage cabinets come with drum supports and
Haz-Drum cabinets include drum rollers for easy drum handling.
Model 1957 drum cabinet ramp makes loading and unloading much
easier.Cabinets come with large FLAMMABLE - KEEP FIRE AWAY
and HAZARDOUS WASTE labels.Compliance: NFPA Code 30 and
OSHA 29 CFR 1910.106(d)(3)
Manufacturer: Eagle
Part Number: HAZ
166
Hurricane Spill Kit 95 gallon
KIT includes
• 1 - Tarp
• 1 - 20’ Rope
• 2 - Lightsticks
• 1 - 20’x100’ PolySheeting
• 1 - Emergency Response Guide
• 1 - FlashLight w/batteries
• 1 - Overpack Wheeled 95 Gallon
Manufacturer: CEP
Part Number: STORMSK95
Poly Overpack Salvage Drum
(65 Gallon)
Just the right size for 30-gallon drums!
Our Poly-Overpack 65 meets Group 1 packaging standards,
salvage drumregulations, and is designed to fit 30-gallon drums.
This overpack nests foreasy storage and has a gasket in the lid for
secure containment. No wastedspace! No wasted money! Meets
performance-oriented packaging requirements of U.S. DOT and UN
regulations. Great as a spill kit container, too! It’s light enough for
one person to handle and large enough to packsufficient absorbent
and response equipment for incidental spills.
Dimensions (Exterior/Interior):
• Top Diameter 28.25”/ 72 cm 23.5”/ 60 cm
• Bottom Diameter 23”/ 58 cm 21.75”/ 55 cm
• Height 37.37”/ 95 cm 33.5”/ 85 cm
• Weight 45 lbs./ 20.5 kg
• Handling Capacity 440 lbs./ 198 kg
• Capacity 65 gal./ 247 liters
• Regulations UN 1H2/X200/S and DOT 49 CFR 173.3
Manufacturer: CEP
Part Number: 1065-YE
Poly-Dolly ATD With All Terrain
Wheels (95 Gallon)
The common dolly has been rattling around industrial plants for
200 years virtually unchanged in design and function. It has been a
good tool, but not efficient enough for handling today’s hazardous
materials. Poly-Dolly, the multi-functional, two-wheel dispensing
station, takes the dolly out of the Industrial Revolution and into the
21st Century.
With Poly-Dolly, mobile dispensing of hazardous liquids is no longer
a cumbersome, risky business. It transports 55-gallon drums with
ease, tilts to become an efficient self-dispensing station, and acts
as its own secondary containment unit. By reducing unnecessary
and dangerous drumhandling, Poly-Dolly protects workers and
improves efficiency—two bigitems in improving profits. Made
of long-lasting, tough polyethylene, Poly-Dolly is strong enough
towithstand daily bumps and scuffs and will not rust or corrode.
That is why companies are saying: “Goodbye dolly. Hello PolyDolly.”
Manufacturer: CEP
Part Number: 5300-YE-A
167
CABINETS
CABINETS
Poly-Slim-Line 6000 (With Drain)
Slim is in! Poly-Slim-Line 6000 offers all of the same
advantages as our Poly-SpillPallet 6000... and more! This
addition to our pallet family features alow, 12” profile and a
UDL load bearing capacity of 6000 lbs. Optional drain.
• Dimensions 54”L x 54”W x 12”H 137 cm x 137 cm x 30 cm
• Weight 91 lbs. / 41 kg.
• Load Bearing Capacity UDL 6000 lbs. / 2700 kg.
• Sump Capacity 66 gal. / 250.8 liters
• Regulations EPA 40 CFR 264.175
Manufacturer: CEP
Part Number: 5400-YE-D
Wheeled Poly Overpack Salvage
Drum (95 Gallon)
ENPAC’s NEW Wheeled Overpack™ is the first mobile one-piece
Overpackon wheels that can handle 55-gallon drums. A salvage
drum and dolly all inone. It eliminates the need for a second dolly
for transportation. This 95-gallon polyethylene UN Rated Salvage
Drum has the built-in handles and 6”Polyolefin wheels that allow
for easy steering through doorways or aroundany obstacle. Ideal
for spillkits!
This item nests for easy storage and has a gasket in the lid for
securecontainment. It is also light enough for one person to handle
and largeenough to pack sufficient absorbents for incidental spills!
Dimensions (Exterior/Interior):
• Top Diameter 32” / 81 cm 27” / 69 cm
• Bottom Diameter 36” / 91 cm 25” / 64 cm
• Height 47” / 119 cm 37” / 94 cm
• Weight 56 lbs. / 25 kg.
• Handling Capacity 250 lbs. / 113 kg.
• Sump Capacity 95 gal. / 361 liters
• Regulation UN / 1H2/X113/S DOT 49 CFR 173.3(c)
Manufacturer: CEP AIRE
Snap Berm
Part Number: OP95-WHEELED
Rapid Deployment for Immediate
Containment
Stinger Portable Soft Berms lead the industry in large- scale spill containment.
Featuring a wide range of sizes and capacities, our line of stinger portable
soft berms can handle any large containment needs you may have. From
pallets to tankers the stinger portable soft berms will provide immediate
and aggressive spill containment. Stinger portable soft berms deploy and
store easily for ease of use. Ground Pad and TrackMat provide additional
protection.
•
•
•
•
•
•
•
•
Easy to assemble snap- up design permits immediate response
Compact storage and transport
Air- lance tested containment welds for maximum product performance
Lap joint welds for maximum strength
Individual serial numbers
CAD designed and cut components
Fuel/ chemical resistant containment area
Custom sizes and special materials available
Options include:
• Ground Pad
• Tracmat
• Storage and Transport Bag
• Bazooka Trickle Filter
• Filter System
Manufacturer: Stinger Berms™
Part Number: 4810- BK-SU, 4820- BK-SU, 4812- BK-SU, 4836- BK-SU, 4860- BK- SU, 4854BK-SU, 4866- BK- SU, 4885- BK-SU, 4850- BK- SU, 4816- BK-SU, 4802- BK-SU, 4801- BK-SU,
4804- BK- SU, 4803- BK- SU, 4805- BK-SU, 4806- BK- SU, 4807- BK-SU
168
AIRE SNAP BERM
AIRE SNAP BERM
AIRE Quick Snap Berm™
911-126012
12' x 60' x 12"
14' x 62'
5,385 US gal.
911-141412
14' x 14' x 12"
16' x 16'
1,466 US gal.
911-141612
14' x 16' x12"
16' x 18'
1,675 US gal.
AIRE Quick Snap Berms TM are the most versatile secondary
containment berms in the marketplace. These portable spill
containment berms can be deployed with just one or two people
that simply unroll the berm and snap the stays into place. Depending
on need, stays can be unsnapped so the end walls of the berm will
lie flat for vehicle entry or exit. The Quick Snap drive in, drive out
berms are manufactured with a petroleum and chemical resistant
heavy duty 30 oz. material.
911-141812
14' x 18' x 12"
16' x 20'
1,884 US gal.
911-142012
14' x 20' x 12"
16' x 22'
2, 094 US gal.
911-142612
14' x 26' x 12"
16' x 28'
2,722 US gal.
911-143012
14' x 30' x 12"
16' x 32'
3,141 US gal.
911-143612
14' x 36' x 12"
16' x 38'
3,769 US gal.
All berms listed below are also available in 8”, 18” or 24” wall sizes.
911-144012
14' x 40' x 12"
16' x 42'
4,188 US gal.
911-145012
14' x 50' x 12"
16' x 52'
5,236 US gal.
911-145412
14' x 54' x 12"
16' x 56'
5,654 US gal.
911-146012
14' x 60' x 12"
16' x 62'
6, 283 US gal.
911-146612
14' x 66' x 12"
16' x 68'
6911 US gal.
911-148512
14' x 85' x 12"
16 x 87'
8900 US gal.
911-155012
15' x 50' x 12"
17' x 52'
5610 US gal.
911-161612
16' x 16' x 12"
18' x 18'
1914 US gal.
Manufacturer:
AIRE Industrial
Part Number
Size
Dimensions (Outside)
Sump Capacity
NSN#
911-040412
4' x 4' x 12"
6' x 6'
120 US gal.
911-040612
4' x 6' x 12"
6' x 8'
180 US gal.
911-040812
4' x 8' x 12"
6' x 10'
239 US Gal.
911-060612
6' x 6' x 12"
8' x 8'
269 US gal.
4235-01-419-4797
911-161612
16' x 16' x 12"
18' x 18'
1,914 US gal.
911-060808
6' x 8' x 8"
8'x10'
270 US gal.
4235-01-548-0855
911-161812
16' x 18' x 12"
18' x 20'
2, 154 US gal.
911-061012
6' x 10' x 12"
8' x 12'
448 Us gal.
911-162012
16' x 20' x 12"
18' x 22'
2,393 US gal.
911-061212
6' x 12' x 12"
8' x 14'
538 US gal.
911-162612
16' x 26' x 12"
18' x 28'
3, 111 US gal.
911-080812
8' x 8' x 12"
10' x 10'
478 US gal.
911-163212
16' x 32' x 12"
18' x 34'
3,829 US gal.
911-081012
8' x 10' x 12"
10' x 12'
598 US gal.
911-164012
16' x 40' x 12"
18' x 42'
4, 787 US gal.
911-081212
8' x 12' x 12"
10' x 14'
718 US gal.
911-166012
16' x 60' x 12"
18' x 62'
7, 180 US gal.
911-101012
10' x 10' x 12"
12' x 12'
748 US gal.
911-202012
20' x 20' x 12"
22' x 22'
2, 992 US gal.
911-101212
10' x 12' x12"
12' x 14'
897 US gal.
911-203012
20' x 30' x 12"
22' x 32'
4, 488 US gal.
911-101412
10' x 14' x 12"
12' x 16'
1,047 US gal.
911-204012
20' x 40' x 12"
22' x 42'
5, 984 US gal.
911-101612
10' x 16' x 12"
12' x 18'
1,196 US gal.
911-205012
20' x 50' x 12"
22' x 52"
7 ,480 US gal.
911-206012
20' x 60' x 12"
22' x 62'
8, 796 US gal.
911-101812
10' x 18' x 12"
12' x 20'
1,346 US gal.
911-102012
10' x 20' x 12"
12' x 22'
1,496 US gal.
911-102612
10' x 26' x 12"
12' x 28'
1,944 US gal.
911-103012
10' x 30' x 12"
12' x 32'
2,244 US gal.
911-104012
10' x 40' x 12"
12' x 42'
2,992 US gal.
911-105012
10' x 50' x 12"
12' x 52'
3740 US gal.
911-121212
12' x 12' x 12"
14' x 14'
1077 US gal.
911-121412
12' x 14' x 12"
14' x 16'
1,256 US gal.
911-121612
12' x 16' x 12"
14' x 18'
1,436 US gal.
911-121812
12' x 18' x 12"
14' x 20'
1616 US gal.
911-122012
12' x 20' x 12"
14' x 22'
1,795 US gal.
911-122612
12' x 26' x 12"
14' x 28'
911-123012
12' x 30' x 12"
911-123612
4235-01-387-1381
4235-01-387-1498
AIRE Quick Snap/Foam Berm™
4235-01-419-4798
AIRE Quick Snap/Foam Berms allow drive in, drive out simplicity
without removing wall support stays. Non-memory foam ends
compress under the vehicle’s weight and return to shape after
the vehicle has passed. Radiused corners and foam pockets
offer reduced stress as vehicles enter and exit extending the spill
containment berm’s service life.
Manufacturer:
Aire Industrial
4235-01-538-6673
Part Number
Size
Dimensions (Outside)
Sump Capacity
2,333 US gal.
920-102612
10' x 26' x 12"
12' x 28'
1944 US gal.
14' x 32'
2,692 US gal.
920-123612
12' x 36' x 12"
14' x 38'
3231 US gal.
12' x 36' x 12"
14' x 38'
3231 US gal.
920-126012
12' x 60' x 12"
14' x 62'
5385 US gal.
911-124012
12' x 40' x 12"
14' x 42'
3, 590 US gal.
920-145412
14' x 54' x 12"
16' x 56'
5654 US gal.
911-125012
12' x 50' x 12"
14' x 52'
4488 US gal.
920-148512
14' x 85' x 12"
16' x 87'
8900 US gal.
170
171
SIZE CHART
MEASURING GUIDELINES
AL ASAYEL SIZE CHART (MEASURED IN Centimetres (CM))
MEASURING GUIDELINES
COVERALL
LABEL SIZE
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Taking correct measurements is important for proper fit. No one should take his/her own measurements.
COVERALL
Chest
(A)
76
80
84
88
92
96
100
104
108
112
116
120
124
128
Arm Length (E)
58
58
59
59
60
61
62
63
64
65
66
66
67
67
Inside Leg
76
76
77
77
78
79
80
81
82
82
83
83
83
83
38
40
42
44
46
48
50
52
54
56
58
60
62
64
(G)
A.NECK: Measure around the base of the neck
where a collared shirt would fit.
JACKETS
LABEL SIZE
Chest
(A)
76
80
84
88
92
96
100
104
108
112
116
120
124
128
Arm Length (E)
58
58
59
59
60
61
62
63
64
65
66
66
67
67
Inside Leg
(G)
76
76
77
77
78
79
80
81
82
82
83
83
83
83
(A)
76
80
84
88
92
96
100
104
108
112
116
120
124
128
Arm Length (E)
58
58
59
59
60
61
62
63
64
65
66
66
67
67
Inside Leg
61
61
62
62
63
63
65
66
68
68
83
70
70
71
B
JACKET
Chest
A
A
COVERALL
(G)
C
D
C
E
ALPHA / NUMERIC CONVERSION CHART : WOMEN’S MEASUREMENT
SIZE
XS
S
4
M
6
8
L
XL
2XL
3XL
10
12
14
16
18
20
22
24
26
28
38 - 39
39 1/2 40 1/2
41 1/2 42 1/2
43 1/2 - 44
1/2
45 1/2 46 1/2
47 1/2 48 1/2
49 1/2 50 1/2
51 1/2 52 1/2
Chest / Bust
32 1/2 - 33
31 1/2 - 34
34 1/2 - 35
35 1/2 - 36
Waist
24 - 24 1/2
25 - 25 1/2
26 - 26 1/2
27 - 28
28 1/2 29 1/2
30 - 31
31 1/2 -32
33 - 34 1/2
35 - 36 1/2
37 - 38 1/2
39 - 40 1/2
41 - 42 1/2
43 44 1/2
38 - 39
39 1/2 40 1/2
42 1/2 - 44
41 -42
44 1/2 - 46
46 1/2 - 48
48 1/2 - 50
50 1/2 - 52
52 1/2 - 54
34 - 34 1/2
35 - 35 1/2
36 - 36 1/2
37 - 37 1/2
ALPHA / NUMERIC CONVERSION CHART : MEN’S MEASUREMENT
SIZE
XS
Chest
S
13 - 13 1/2
M
14 - 14 1/2
L
15 - 15 1/2
XL
16 - 16 1/2
2XL
17 - 17 1/2
3XL
18 - 18 1/2
4XL
19 - 19 1/2
20 - 20 1/2
INDUSTRIAL PARKA
ALPHA
SIZE
XS
32
S
34
36
M
38
40
L
42
44
XL
46
48
2XL
50
52
3XL
54
56
4XL
58
60
INSULATED COVERALLS
ALPHA
SIZE
172
C.SLEEVE: Bend the elbow slightly. Start at the
center back of the neck and measure across the
shoulder to the elbow and down to the wrist bone.
D.WAIST: Standing to his/her side, measure around
the natural waistline.
36 1/2 -37
1/2
Hips
B.CHEST/BUST: Standing to his/her side and holding
tape firmly under one arm, measure around the
shoulder blades, under arms and around the
fullest part of the chest. Arms should be kept as
close to the side of the body as much as possible
– it will affect the measurement if they are raised
too high.
F
E.SEAT (HIPS): Standing to his/her side, measure
around the fullest part of the hips. Start seven
to eight inches below the natural waistline. If
the tape cannot be moved up and down, it is not
around the fullest part.
F.INSEAM: Standing in front of the individual, have
him/her stand with both feet flat on the ground
with legs straight and slightly apart. Have him/
her hold one end of the tape measure at the base
of the crotch seam. You will straighten the tape
down the inside of the leg to the top of the shoe.
• DO try to have the individual wear shoes that will actually be worn with the uniform for the fitting. The style and type of shoe worn
with a uniform will affect the pant length. Please keep this in mind when measuring.
• DO NOT adjust the measurement to allow for shrinkage. Potential shrinkage has already been figured into the sizing of each
garment.
• DO order the larger size if measurements fall between two sizes (unless the individual prefers their uniforms to fit a little tighter).
S
M
L
XL
2XL
3XL
4XL
34-36
38-40
42-44
46-48
50-52
54-56
58-60
173
2012-1013
Al Asayel Catalogue
P.O Box 25767
Mussafa, Abu Dhabi, United Arab Emirates
Tel : +971 4 554 1001, Fax : +971 4 554 2005
[email protected]
Visit our website
www.alasayelsafety.com
www.alasayelsafety.com
P.O Box 18604
Dubai, United Arab Emirates
Tel : +971 4 886 0322, Fax : +971 4 886 0321
[email protected]

- Al Asayel Health and Safety

Transcription

Similar documents

PRICE TOTAL $ FIBA Shot Clock *pair

cobra 142gtl om parts list

Owner`s Manual

EZ Green, cat# 873

Dietary Supplement Testing: How to Detect “Dry Labbing”

Saebo Evaluation and Treatment Kit

XGames.ESPN.go.com

Saebo Long Term Care Program

Decor Rentals - The White List

EXCLUSIVE OFFERS BELOW