Technical Data Sheet - MERLIN Avian Radar System

Technical Data Sheet
MERLIN SCADA
Avian Radar Mortality
Risk Mitigation System
SUMMARY SPECIFICATIONS
subject to change without notice
Model:
E-Series (Environmental)
Application:
Real-Time, radar-activated bird & bat
mortality risk mitigation
Configuration:
Fixed or mobile radar installation with
MERLIN SCADA wind farm control system
interface
Sensors:
200 watt solid state Doppler Horizontal
Surveillance Radar (HSR) & 25 kW Vertical
Scanning Radar (VSR); Frequency
Diversity processing option
Operation:
Simultaneous horizontal and vertical bird
detection of migratory birds, raptors &
bats with real-time analysis of flight paths,
altitude, characteristics, passage rates and
environmental conditions against
mitigation rule sets
Operating Range:
HSR 2-6 miles, 360 degrees around the
site with 24 degree AGL detection from
ground level & above; VSR 0.75-3 miles
with 24 degree beam width & detection
from ground level to 15,000 ft AGL
Power:
110/220 vAC, 60/30 amps service with
UPS back-up & power conditioning (30
minutes); optional auto-start single or
dual 6 kW diesel generator & fuel tank to
support 10-20 days 24-7 operation
Network:
TCPIP with MODBUS & OPC protocols via
fiber optic network for windfarm system
control via interface with Supervisory
Control and Data Acquisition (SCADA)
system
ABOVE: MERLIN SCADA installation at the Iberdrola Penascal wind
farm in Texas, USA (operating since 2009)
MERLIN SCADA-M for coastal migratory bird risk mitigation (below right);
Operator user interface with current risk status (below, left)
(Right) MERLIN SCADA-R
interface for raptor mitigation
using turnbine centric model
that idles individual turbines
when proximate risk is
detected; each turbine is
assigned a color-coded risk
value (El Pino wind farm,
Spain)
MERLIN SCADA is the world’s only radar-based wind farm risk
mitigation system and provides continuous monitoring and automatic
activation of mitigation measures to reduce mortality risk for
migratory birds, resident birds, raptors and bats. The system applies
rule sets programmed to respond to a variety of risk conditions in
real-time activating mitigation measures that include operator alerts,
turbine idling and activation of deterrent devices (long range
bioacoustic and laser based).
Offices in: Florida • Colorado • Washington D.C. • Montreal • London
DOC# TDS-SCADA-012815
www.detect-inc.com
Copyright 2015, DeTect, Inc., All rights Reserved
Technical Data Sheet
AVIAN RADAR SYSTEMS
DeTect provides advanced radar technologies and expert
support to wind energy developers, owners and consultants for
bird and bat survey, mortality risk assessment, monitoring and risk
mitigation for projects worldwide that includes:
•
•
•
•
•
•
NEXRAD pre-screening site assessment
Bird & bat radar systems - terrestrial and offshore
Data processing, analysis & reporting
Bird & bat mortality risk analysis
Risk mitigation radar systems
Public meeting support & technology consulting
Bird & Bat Radar Technologies from DeTect:
DeTect is the developer and manufacturer of the most
advanced and proven radar systems available for wind energy
project bird and bat survey, risk assessment, monitoring and
realtime risk mitigation with over 90 systems operating worldwide.
The technology was originally developed for the US Air Force and
NASA and is highly automated providing unattended 24-7
collection of high quality data on bird and bat activity at proposed
windfarm sites that can be used to develop detailed
preconstruction risk projections and mitigate risk at operating
wind farms. DeTect provides full operational and technical support
to wind farm owners and consultants that includes system
deployment, operation, user training, data processing, analysis,
reporting and QA/QC. Staff specialists include highly experienced
radar ornithologists, avian biologists and statisticians that
comprise the most experienced team of experts in remote sensing
of birds and bats in the world with specific expertise in design,
construction and operation of bird/wildlife detection systems for
realtime risk management.
BirdMap™ NEXRAD Pre-screening Risk Assessment:
BirdMap™ is a GIS-based system that uses processed radar data
from the US NEXRAD weather radar network to provide current
and historical avian population density and seasonality data for the
continental US, Alaska and Hawaii, including most coastal and
offshore resource areas. BirdMap incorporates public and proprietary databases on habitat, threatened and endangered species,
roost sites, hibernacula, bird and bat distribution, and refuges
along with relevant correlation
issues such as wetlands, weather
and visibility to provide preliminary evaluation of a proposed
windfarm site. DeTect maintains
the largest database in the world
on bird and bat activity that
includes over ten years of bird
density and migratory data for the
US. BirdMap™ provides a unique
resource for conducting a low cost “screening” assessment of
proposed wind energy development sites to assist in site selection
prior to investment in long term planning studies, radar and field
studies, and design.
MERLIN Avian Radar System:
MERLIN surveys provide the most cost effective, scientifically
sound, and conclusive method for collection of high quality,
statistically superior data on bird and bat movements at proposed
wind turbine project locations for both onshore and offshore wind
turbine installations. DeTect has extensive expertise and
experience that includes the only staff with experience on
conducting major multiyear,
continuous avian radar studies
for landbased and offshore
windfarms. MERLIN uses
state-of-the-art radar and
computer techniques
developed specifically for
detecting and tracking the
unique behavioral
characteristics of birds and
bats to collect data
continuously and
automatically generate highly accurate, detailed datasets for
quantitative analysis. MERLIN is fully remotely viewable and
controllable and operates 24-7 unattended. Data is also archived
providing a permanent record for each project. MERLIN’s options
for real time display and the automatic reporting feature generate
detailed data in both tabular and graphical formats quantifying the
numbers of birds passing through the rotor swept area allowing
precise calculation and determination of bird and bat mortality risk.
MERLIN SCADA Mortality Risk Mitigation System:
For operating windfarms, MERLIN SCADA™ functionality allows
the MERLIN system to provide advance “early” warning to windfarm
operators of approaching migratory or resident birds and bats
under mortality risk conditions. MERLIN SCADA™ can operate
autonomously, automatically sending requests to idle turbines
when risk conditions are detected by the system, and sending
requests to restart the turbines when the risk has abated. The
MERLIN SCADA™ system can also be configured to mitigate
mortality risk for raptors by monitoring the airspace above
turbines, evaluating the risk of collision for each target and
automatically stopping the turbines when raptor activity consistent with mortality risk is detected. The MERLIN SCADA™ operating
software is fully compatible with most wind farm SCADA
(Supervisory Control and Data Acquisition) systems.
Offices in: Florida • Colorado • Washington D.C. • Montreal • London
DOC# TDS-SCADA-012815
www.detect-inc.com
Copyright 2015, DeTect, Inc., All rights Reserved