Document

Transcription

Document
SL carline +
THE WAY TO MAKE IT | QUALITY
More than twenty years of expertise lies in the proven crimp force monitoring system SL carline +. The marked with the + system combines advanced evaluation algorithms with straight design. The high demand
and ongoing market presence confirm the perfect price-performance ratio.
Monitoring functions:
Individual crimping process is monitored for the following defects:
• Missing strands
• Strands outside of terminal
• Incorrect crimp height
• Short insulation
• Incorrect wire gauge • And many more
• High/low insulation
• Wire not completely in the wire crimp
Enhanced analysis:
In addition to the area and signature analysis, the following
evaluations are included:
• Zone 1
• Zone 2
• Peak force
Your benefits:
Easy installation:
• Suitable for every crimp applicator
• Designed for bench presses and automatic machines
• Single or double channel system
• Force sensor adatable on base-plate, ram or press frame
• User friendly interface with graphical display of force curves
• infoTOUCH access control and tool memory
• Built in statistical process control
• Serial interface for SPC and Softscope software
Strain sensor mounted on the press frame eliminates
the need for adaptation base plates. Together with the
possibility to use the crimp force itself as trigger to eliminate the need to connect the trigger, this makes the
installation very easy.
Small, compact & robust
Technical data:
The SL CARLINE+ system is excellently suited for all fields of application requiring the monitoring of crimp
forces. The system accepts a wide range of triggering methods such as proximity, encoder and even automatic triggering by the force itself. A wide range of force sensors and adaptation plates (either on the ram or
base-plate) are already available. To remove the need for adaptation plates, strain sensors mounted on the
press frame are also supported.
The system can be used with every crimping machine, and thus protect your investment also for the future.
• Channels: 1 or 2
• Tolerance sets: 8
• Trigger (optional): proximity, encoder,
disc & servo
• Outputs: Stop, clock, OK & NOK
• Inputs: Learn & Reset, etc.
• Graphical dot matrix LCD
• InfoTouch: Access control & tool memory
• Interface: RS-232 for printing or connecting to
SL SPC/SL Softscope Software
• Power supply: 110-240 VAC, 50/60 Hz, 15 watt
• Dimensions (LxWxH): 215 x 157 x 75 mm; 1,2 kg
Version 1/2014 - English
SLE quality engineering GmbH & Co. KG
Josef-Buchinger-Straße 9
94481 Grafenau
Germany
Phone +49 8552 9640 0
www.sleqe.com