Supplier Guidance Global Requirements

Transcription

To inspire and nurture the human spirit – one person, one cup and one neighborhood at a time
Supplier Guidance
Global Requirements
Version 2.1
This document represents minimum operational standards and requirements that Suppliers must comply with to ensure
safety, security, and streamlined operations. Requirements are subject to change periodically. Additional guidelines may
be required in order to meet specific regional or customer needs.
Document located at www.starbucks.com/supplier/requirements
March 2015
Starbucks Corporation, P.O. Box 34067, Seattle, Washington 98124-1067
© 2013 Starbucks Coffee Company
Revision History
Date
Versions
May 2014
Starbucks Supplier Guidance - Requirements, Version 1.0
December 2014
March 2015
STARBUCKS Supplier Guidance - Requirements (Version 2.1)
March 2015
Table of Contents
Section
1.0
Page No.
Introduction ......................................................................................................................... 1
1.1 Purpose ........................................................................................................................... 1
2.0
Policies and Procedures ...................................................................................................... 1
2.1 Supplier Code of Conduct .............................................................................................. 1
2.2 Supplier Status & Conduct............................................................................................. 2
2.2.1 Business Stability ............................................................................................... 2
2.2.2 Anti-Bribery ....................................................................................................... 2
2.2.3 Confidentiality.................................................................................................... 3
2.2.4 Workplace Harassment....................................................................................... 3
2.3 Quality............................................................................................................................ 3
2.3.1 Quality Control – General .................................................................................. 3
2.3.2 Quality Control – Food....................................................................................... 4
2.3.3 Quality Control – Non-Food .............................................................................. 4
2.3.4 Product Inspection and Acceptance ................................................................... 4
2.4 General Policies ............................................................................................................. 5
2.4.1 Commencement of Work ................................................................................... 5
2.4.2 Risk Management / Insurance ............................................................................ 5
2.4.3 Subcontracting .................................................................................................... 5
2.4.4 Product Withdrawal............................................................................................ 5
2.4.5 Nonconformance to Purchase Documents ......................................................... 5
2.4.6 Use of Logos, Trademarks, Promotions and Advertising .................................. 6
2.4.7 Unsolicited Samples ........................................................................................... 6
2.5 Business Processes and Procedures ............................................................................... 6
2.5.1 Raw Materials and Supplies ............................................................................... 7
2.5.2 Hazardous Materials ........................................................................................... 7
2.5.3 Invoice Detail Minimum Data Required ............................................................ 7
3.0
Packing and Shipping Requirements ................................................................................ 7
3.1 Operational Requirements.............................................................................................. 8
3.1.1 Terms of the Order ............................................................................................. 8
3.1.2 Case Requirements ............................................................................................. 8
3.1.3 Palletizing Requirements.................................................................................... 9
March 2015
3.1.4 Pallet Specifications ......................................................................................... 10
3.1.5 Pallet Quality .................................................................................................... 11
3.1.6 Loading Requirements ..................................................................................... 11
3.1.7 Perishable and Refrigerated Products............................................................... 11
3.1.8 Labeling Requirements..................................................................................... 13
3.1.8.1 General Labels for Pallets, Cases and Inner Packaging.................................. 13
3.1.8.2 Special Labels – Warning Labels ................................................................... 14
3.1.8.3 Barcoded Universal Product Code Labels ...................................................... 15
3.1.8.4 Global Trade Item Number and License Plate Barcode Labels...................... 15
3.1.9 Country of Origin ............................................................................................. 16
3.2 Transportation / Shipping............................................................................................. 17
3.2.1 Cargo Security .................................................................................................. 17
3.2.2 Freight Terms – Global (Excluding North America) ....................................... 18
3.2.3 Freight Terms – North America ....................................................................... 19
3.2.4 Booking Requirements – International............................................................. 20
3.2.5 Booking Requirements – Intra U.S./Canada .................................................... 20
3.2.6 Booking Requirements – Intra Asia ................................................................. 21
3.3 Shipment Documentation – General Requirements ..................................................... 21
3.3.1 Shipping – Hazard Materials ............................................................................ 21
3.3.2 Delivery and Shipping Documentation ............................................................ 22
3.3.3 Commercial Documentation – International Border Crossings ....................... 24
3.3.4 Commercial Invoice Requirements – International Border Crossings ............. 26
3.4 Customs and Import Clearance .................................................................................... 29
3.4.1 Authorized Customs Brokers ........................................................................... 29
3.4.2 Customs – Importer Security Filing ................................................................. 29
3.4.3 U.S. Customs – 24-Hour Rule.......................................................................... 30
3.4.4 Preferential Import Scheme - Documentation Required .................................. 30
3.5 Carriers and Shipping Modes....................................................................................... 30
3.5.1 Carrier Selection ............................................................................................... 30
3.5.2 EMEA Carriers ................................................................................................. 31
3.5.3 Asia Pacific Carriers......................................................................................... 31
3.5.4 North American Carriers - Shipments Within or Between the U.S. and/or
Canada .............................................................................................................. 31
3.5.5 Shipping Mode Selection ................................................................................. 32
March 2015
3.6 Delivery Appointments – Supplier-Managed Freight.................................................. 33
3.7 Supplier Performance - Packing & Shipping Requirements ........................................ 33
Tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Pallet Specification Requirements ................................................................................. 10
Temperature Requirements for Perishable and Refrigerated Products.......................... 11
Usage of GS1 Barcodes ................................................................................................. 16
Size Specifications for Barcodes.................................................................................................16
Information Required on Shipping Documents ............................................................. 22
Information Required on Bill of Lading ........................................................................ 23
Commercial Documentation Packet Contents ............................................................... 25
Figures
Figure 1. Example Label ..............................................................................................................14
Exhibits
(See starbucks.com/supplier for links to the below documents)
Exhibit A
Exhibit B
Exhibit C
Exhibit D
Exhibit E
Supplier Code of Conduct
Starbucks Social Responsibility Standards: Manufactured Goods & Services
Starbucks Standards for Food Suppliers Exhibit
Starbucks Standards for non-Food Suppliers
Non-Partner Travel Procedure – U.S. & Canada
March 2015
1.0 INTRODUCTION
1.1
Purpose
Starbucks/Supplier was prepared by Starbucks Global Sourcing and Supplier
Relations in accordance with Starbucks business standards, policies and practices.
The information provided in the requirements section is intended to provide
guidance to both current and potential Suppliers by outlining the core
Requirements that are fundamental to our business. These Requirements are
supported by our Standard Terms and Conditions and/or additional contract
(including purchasing documents). Failure to meet the requirements outlined here
may result in the collection of damages and eventual termination of the
relationship.
As we streamline and enhance the manner in which we purchase and sell our
products and services, the Starbucks/Supplier will be updated and refined
periodically to reflect the most current information.
Suppliers have 24/7 access to the information at www.starbucks.com/suppliers.
Suppliers of Starbucks are expected to adhere to the information provided and are
responsible for staying informed and up to date as periodic changes are made to
the information contained. Procedural and operational updates are effective 30
days after they are published.
2.0 POLICIES AND PROCEDURES
2.1
Supplier Code of Conduct
Starbucks strives to be a great, enduring company by employing business
standards and practices that produce social, environmental and economic benefits
for the communities where we do business. We believe that conducting business
responsibly benefits society, as well as our various stakeholders, including
partners, customers, suppliers, investors and community members.
As a global company, Starbucks does business with suppliers from many
countries of diverse cultural, social and economic circumstances. We strive to
work with suppliers that are committed to operating their business, including their
Supply Chain, in a responsible and ethical manner according to our universal
principles, respecting the rights of individuals and helping to protect the
environment.
We expect our suppliers to comply with the Supplier Code of Conduct and
specific standards, which include the following:
a. Demonstrating commitment to the welfare, economic improvement and
sustainability of the people and places that produce our products and services;
March 2015
1
b. Adherence to local and U.S. laws, as well as adherence to international
standards regarding human rights; involuntary, forced, slave, bonded,
indentured or trafficked labor; workplace safety; and worker compensation
and treatment;
c. Meeting or exceeding national laws and international standards for
environmental protection, and minimizing negative environmental impacts of
Suppliers’ operations;
d. Commitment to measuring, monitoring, reporting and verification of
compliance to this code;
e. Pursuing continuous improvement of these social and environmental
principles; and
f. Starbucks may audit Suppliers or use a third party to verify compliance with
standards and expectations. Starbucks reserves the right to discontinue
business with any Supplier that fails to comply with our standards or fails to
correct any issues of non-compliance.
2.2
Supplier Status & Conduct
2.2.1 Business Stability
The financial health of our suppliers is critical to Starbucks. Certain
financial data may be requested when a supplier is initially considered and
at various intervals in our relationship to ensure ongoing financial health.
We may also request information about a supplier’s parent company and
expect to be notified promptly if a change in ownership takes place.
2.2.2 Anti-Bribery
Starbucks is committed to the highest ethical standards in all business
interactions. To support these high standards, Starbucks suppliers must not
exchange bribes or kickbacks of any kind to influence business decisions
or secure any improper advantage.
Suppliers shall comply with all applicable anti-bribery laws and
regulations, including the Foreign Corruption Practices Act (FCPA) and
the U.K. Bribery Act. Specifically, Suppliers must not directly or
indirectly give or accept anything of value, or make payments, promises,
or offers that would improperly impact, or could be perceived to
improperly impact business transactions with government officials or
individuals in the private sector.
March 2015
2
2.2.3 Confidentiality
Due to the highly competitive nature of the coffee and foodservice
industry, Starbucks requires its Suppliers to maintain—in the strictest
confidence—all technical, business and economic information which they
may receive during the course of transacting business with Starbucks.
Suppliers shall sign a Starbucks Confidentiality and Non-Disclosure
Agreement (see Starbuck.com/Supplier)
2.2.4 Workplace Harassment
Our Starbucks Mission and Principles incorporates providing a great work
environment and treating each other with respect and dignity. Starbucks
strictly prohibits harassment on the basis of sex, race, color, national
origin, religion, sexual orientation, physical disability, mental disability,
age, veteran status, marital status or any other characteristic protected by
applicable law. This prohibition applies to all partners, suppliers or
customers engaged in company business.
If Starbucks becomes aware of a situation in which a Supplier may have
violated this policy, Starbucks will promptly notify the Supplier and
request that appropriate responsive action be taken. Similarly, if a Supplier
is aware of inappropriate actions made by a Starbucks partner, the
misconduct should be reported immediately by calling the Starbucks Audit
Line.
2.3
Quality
Although each supplier selection process is unique, Starbucks has key
expectations of all suppliers, regardless of size, location or product/service
provided.
2.3.1 Quality Control – General
Suppliers are responsible for maintaining high levels of quality in their
facilities, materials and employees. Quality control programs, defective
material control processes and other business practices of Suppliers may
need to be reviewed by Starbucks to determine the Supplier’s ability to
provide products and services that consistently meet or exceed
Requirements.
We believe quality should be built into the entire business process from
development through delivery and expect suppliers to proactively take
responsibility for the quality of their products and services. We work
closely with our suppliers to develop product specifications and service
Requirements prior to authorization.
March 2015
3
2.3.2 Quality Control – Food
a. Suppliers shall strictly comply with Starbucks Food Standards at all
times. A copy of the requirements and standards referenced in this
section, are available at www.starbucks.com/suppliers. Additional
requirements, Requirements and/or specifications may apply,
depending on the nature of the product.
b. Suppliers shall be able to demonstrate compliance with Starbucks
Food Standards, preferably by sharing its Global Food Safety Initiative
(GFSI) benchmarked scheme audit report, or by sharing food safety
audit reports that are reasonably acceptable to Starbucks.
c. Production facilities may be audited by a third party auditor appointed
by Starbucks. The audit will assess the Supplier’s compliance with
Starbucks Food Standards. The Supplier shall bear the cost and
expense related to such audit.
d. Starbucks reserves the right to conduct quality and/or food safety
assessments and/or audits of any of the company facilities supplying
Starbucks branded, non-branded or custom made products. This may
include assessment and audits of companies that sell ingredients,
components and/or materials to the Supplier. Onsite audits and/or
inspections may be announced or unannounced.
e. More information is available at www.starbucks.com/suppliers.
2.3.3 Quality Control – Non-Food
a. Suppliers shall strictly comply with Starbucks Standards for Non-Food
Suppliers at all times. The Starbucks Authorized Representative will
provide the Supplier with a copy of this document, as well as any
updates and revisions thereto.
b. Starbucks reserves the right to conduct quality audits and/or
inspections of any facility supplying Starbucks branded, non-branded
or custom made products. Onsite audits and/or inspections may be
announced or unannounced.
c. More information is available at www.starbucks.com/suppliers.
2.3.4 Product Inspection and Acceptance
Incoming goods may be inspected and tested by Starbucks or its
distributors for conformance to specifications. Nonconforming goods are
placed on “QC Hold” (quality control hold) which may result in delay of
payment until the issues are resolved. Product disposition will be
determined based on the extent of the nonconformity.
March 2015
4
2.4
General Policies
2.4.1 Commencement of Work
Starbucks may provide sales or quantity forecasts for the convenience of
the Supplier. Such forecasts are for planning purposes only, and do not
constitute Orders or binding commitments on behalf of Starbucks.
Suppliers must have a valid purchase document before the production of
goods or commencement of services. This includes artwork, drawings,
prototypes, molds or any other product or service for which the supplier
expects payment.
2.4.2 Risk Management / Insurance
Seller shall maintain Commercial General Liability Insurance (Public
Liability) including coverage for products liability and completed
operations, with a per occurrence limit of not less than US $1 Million and
a general aggregate limit of not less than US $2 Million. US and Canada
Suppliers shall include Starbucks as an Additional Insured on such
policies. Upon request, Seller will provide a certificate of all required
insurance coverage to Starbucks
2.4.3 Subcontracting
Starbucks prefers to contract with the direct source of its products or
services unless outsourcing or subcontracting is approved in writing. This
approval does not apply to the purchase of component parts and raw
materials, or when the Supplier is a known reseller. Suppliers should
discuss individual situations with the Authorized Representative to be
certain.
2.4.4 Product Withdrawal
Starbucks has procedures in place in the event a product withdrawal
becomes necessary. These actions may be taken in consultation with the
Food and Drug Administration (FDA) or the Consumer Product Safety
Commission (CPSC). Starbucks will direct these activities and expects full
cooperation from any Supplier whose product is involved in such action.
2.4.5 Nonconformance to Purchase Documents
All goods and services are expected to conform to requirements,
schedules, quantities, specifications, scope of work, prototype, sample,
proof, cut sheets, and/or drawings approved by Starbucks and referenced
by the Order. Nonconforming products or services may be rejected or
require specific remedies, including the reimbursement of price and/or the
March 2015
5
cost of handling, freight, storage, rework or additional services needed to
dispose, replace, re-perform or bring the product or service into
compliance.
2.4.6 Use of Logos, Trademarks, Promotions and Advertising
Very specific standards govern the reproduction and use of Starbucks
logos and marks, including color, size and application. The Authorized
Representative shall communicate these standards to the Supplier as
needed.
Starbucks controls the rights to its trademarks and designs which cannot
be reproduced in any form without a license. Starbucks does not allow the
use of its name, logos, products, stores or other images in Supplier
advertising, annual reports or other printed, video or audio
communications. If there is a compelling advantage to Starbucks to
participate in a Supplier project, it may approve a Supplier’s request for
such use. Any such request and justification shall be submitted to the
Authorized Representative for consideration.
2.4.7 Unsolicited Samples
Starbucks is actively engaged in developing products and ideas of its own.
While we are interested in new ideas, we have to preserve our own
flexibility and ability to innovate. Under no circumstances should samples
be sent to Starbucks unless specifically requested by an Authorized
Representative. If unsolicited samples are sent to Starbucks, neither their
receipt nor acceptance obligates Starbucks in any way. Unless Starbucks
enters into a written contract or agreement with the Supplier, Starbucks
does not agree to keep unsolicited information confidential and does not
agree to compensate the Supplier in any way for the information or idea.
Subject to any valid patent rights, Starbucks expressly reserves the right to
develop products, technology, ideas and materials similar or identical to
those that a Supplier may submit. We request that samples not be
manufactured with the Starbucks name, trademark or logo unless licensed.
To avoid inadvertent infringement, we require that any samples, materials,
dies, printing plates or similar items that are used to create unsolicited
samples with unauthorized marks be destroyed.
2.5
Business Processes and Procedures
The following section outlines the Requirements for some of the most common
day-to-day activities. Prior to commencement of work, the Authorized
Representative shall identify to each Supplier specific commodities or services
that may have special procedures, product development, or intellectual property
requirements.
March 2015
6
2.5.1 Raw Materials and Supplies
Starbucks is not responsible for raw materials or supplies purchased by the
Supplier beyond what is required to fulfill current open purchase orders or
blanket agreement releases. Exceptions must be authorized in writing by
the Authorized Representative.
2.5.2 Hazardous Materials
Suppliers must identify any hazardous material sold to Starbucks and
supply a Material Safety Data Sheet (MSDS, OSHA form 20, IMDG
certificate or equivalent). The MSDS must be provided to the Authorized
Representative prior to the first shipment of any new or revised item in
order to ensure product shippers and handlers have the required
information.
2.5.3 Invoice Detail Minimum Data Required
The following data must be present on invoices submitted to Starbucks
regardless of method of submission:
•
•
•
•
•
•
•
•
Supplier name
Supplier remit-to address
Bill-to name and address of Starbucks legal entity
Invoice number (unique)
Invoice date
Invoice amount (currency indicated)
Description of product or service
Amount by invoice line item
For billing against a PO (BPO, BPA or standard), the PO number, release
number, PO line number and shipment number are required.
For non-PO billing, the name of the Starbucks partner requesting the
goods or services is required.
3.0 PACKING AND SHIPPING REQUIREMENTS
As we strive to achieve Starbucks’s mission within the context of our supply chain, we
recognize the value of reliable and well-coordinated relationships with our Suppliers.
This section of the Supplier Guidebook communicates Starbucks’ operational
expectations. By diligently working together with our Suppliers toward high standards of
quality, efficiency and operational excellence, we will enable an even stronger, more
valuable operational partnership between our organizations.
The packing and shipping Requirements included in this section apply to all products
shipped to a Starbucks regional distribution center (RDC) or consolidated distribution
March 2015
7
center (CDC) unless specifically called out as an exception.. At the discretion of the
Starbucks representative, the same or similar Requirements may apply to products
shipped to any other Starbucks location, such as a customer or a retail location.
3.1
Operational Requirements
3.1.1 Terms of the Order
Suppliers must ensure that shipments meet all terms of the order, including, but
not limited to:
a.
b.
c.
d.
Ship the correct quantities
Ship the correct items in good condition
Ship to the correct location
Ship and/or deliver on time
If the freight terms for the shipment call for Starbucks to manage the freight and
control the transportation, then the Supplier shall ensure that an appointment is
booked to pick up the goods and that the goods are ready to be shipped according
to the date on the order.
If the freight terms for the shipment call for the Supplier to manage the freight
and control the transportation, then the Supplier is required to have requested a
dock appointment and be prepared to deliver shipments by the date listed on the
order.
3.1.2 Case Requirements
a. Each case may contain only one type of item (SKU) associated with one lot
and one Order.
b. All components that comprise a SKU must be packaged together.
c. When a standard full case quantity has been established for an item, all cases
must have the full quantities of inner packs and cases (no partial cases).
d. All products must come in a sealed case that contains and protects items in
shipment, storage and reshipment without the use of additional packaging.
Use only materials that are environmentally safe and free of
chlorofluorocarbons (CFCs).
e. Depending on the channel of distribution and/or how the item is sold
additional packaging requirements may be applicable (e.g. items that will be
distributed via parcel shipments require higher packing standard than for
standard Starbucks store deliveries).
f. For deliveries to all regions except EMEA the maximum weight for a case
that contains more than one unit is 70 pounds (lbs.). For deliveries to EMEA
March 2015
8
the maximum weight for a case that contains more than one unit is 23
kilograms (kg).
g. Larger sized and/or heavy items, such as but not limited to furniture and
equipment, must be packaged to enable them to be safely and stably stacked,
and must be protected from movement within the outer packaging.
h. Some unusual types of items may not require a case in order to be sufficiently
stable and protected in transit and/or storage. These items are to be packaged
in whatever way is customary and suitable for containing and protecting the
item. Specific Requirements may be communicated separately to address
Requirements for these items.
3.1.3 Palletizing Requirements
a. When shipping to any RDC (except the three listed below), slip-sheets may be
used in place of pallets when slip-sheeting the product enables a transportation
cost or efficiency advantage, but only with prior approval by the Starbucks
Buyer . Unless otherwise indicated, all requirements regarding palletizing
product apply to product stacked on slip-sheets. Slip sheeting is not permitted
for product inbound to:
1) Singapore Regional Dist. Center,
2) Wai Gao Qiao Regional Dist. Center,
3) Futian Regional Dist. Center
b. Unless shipped as parcels shipments must be palletized unless otherwise
instructed by the authorized Buyer.
c. Package, palletize and secure all items in shipments so that they can withstand
any normal transportation and handling without damage. Corner boards are
recommended and may be additionally required for heavy products such as
liquids.
d. Whenever possible, all items on a pallet should be identical (same SKU and
lot and shipped against the same Purchase Order). If a mixed pallet is created,
product must be physically separated on the pallet (e.g. use a slip-sheet) to
ensure that the same items, lots and orders are grouped together and can be
immediately and unmistakably identified. See requirements section on
Special Labeling Requirements - Warning Labels, for specific labeling
Requirements for mixed pallets).
A maximum of 2 Purchase Orders is acceptable on one pallet (mixed) as long
as both Purchase Orders are physically separated by means of a slip-sheet and
clearly indicated on the pallet label. A 2 lot maximum of the same item are
allowed to be packed on one pallet but require physical separation by slipsheet and each must be clearly indicated on the pallet label.
March 2015
9
e. When shipping in full pallet quantities, all tiers on the pallet contain the same
number of cases.
f. Whenever possible, build pallets so that they can be double-stacked without
causing damage to the product (see section referring to Special Labeling
Requirements, for pallets that cannot be double-stacked).
g. Cases cannot over-hang the pallet edges. Minimize under-hang of cases on
pallets.
h. Build pallets to maximize the quantity of product that can safely and stably fit
on the pallet while remaining under the height specifications indicated in
Table 1.
3.1.4 Pallet Specifications
Pallet specifications are based on the destination region and DC type. Pallet
specifications must comply with the Requirements shown in Table 1, unless
otherwise specified and approved by the Authorized Starbucks Representative.
Table 1. Pallet Specifications
Specification
Type
Maximum pallet
stack height
measured from
floor to high point
of pallet
North America
Latin America
RDCs: 53 in. (135cm)
CDCs: 84 in. (213cm)
EMEA
RDCs: 160cm
Asia Pacific
RDCs: 190cm
Greater China
RDC’s & CDC’s 2.2m
Pallet size and
construction
requirements
1
GMA 4-way
• 40 in. x 48 in.
• 100 cm x 120 cm
• 50 lb. max weight
United Kingdom
2
• UK Standard
• 100 cm x 120 cm
(31.4 in. x 47.2 in.)
All Other EMEA
countries
3
• Euro pallet
• 80 cm x 120 cm
(31.50 in. x 47.2in.)
GMA 4-way
• 40 in. x 48 in.
• 100 cm x 120 cm
• Softwood pallet
boards or higher
grade
Greater China
GMA 2-way or 4-way
• 40 in. x 48 in.
• 100 cm x 120 cm
• Softwood pallet
boards or higher
grade
1) Grocery Manufacturer Association (GMA) 40 in. x 48 in. 4-way flush pallet is the most
common size stringer pallet (new and used).
2) UK, Industrial or EUR 3 pallet as specified by the European Pallet Association (EPAL) and
EN 13698-2.
3) 3) Europallet as specified by the European Pallet Association (EPAL) and EN 13698-1.
March 2015
10
3.1.5 Pallet Quality
a. Pallets are required to be wooden (except in Greater China where wooden is
recommended, but plastic is acceptable), respectively GMA Grade A, UK
Standard, EURO pallet Standard or better standards and dimensions. Pallets
must be un-modified from the pallets original construction.
b. Use of rented pallets requires an authorized exception by a Starbucks
representative. Starbucks will not pay charges associated with rented pallets.
c. Pallets shall be clean, free of damage (including splinters and exposed nails)
and free of odors.
d. Pallets shipped into or out of the U.S. shall be compliant with the International
Standards for Phytosanitary Measures No. 15 (ISPM 15) and “wheat stamped”
(see Supplier Guidance - Reference under Acronyms and Definitions). Pallets
shipped into Greater China must be stamped “IPPC” (International Plant
Protection Treaty). IPPC stamp not required for intra China shipments
3.1.6 Loading Requirements
a. For sealed trailers and containers, secure the product to ensure that it remains
stable and free of damage through any normal means of transportation. For
sealed shipments, the Supplier shall be responsible for the condition of
product upon arrival at destination, unless an unusual event such as an
accident en route has been noted.
b. It is the responsibility of the Supplier to provide any blocking and bracing
equipment used to ensure that freight is secure for transport.
c. Configure pallets to maximize capacity, stabilize product and distribute
weight in the trailer or container.
d. See Cargo Security, for Requirements on sealing truckloads and containers.
3.1.7 Perishable and Refrigerated Products
a. Products must be maintained at specified temperatures, depending on
categorization of an item, as indicated in Table 2.
Table 2. Temperature Requirements for Perishable and Refrigerated Products
Temperature Range (˚F)
Minimum
Target
Maximum
Ambient/Room Temperature
NA
70˚
NA
Refrigerated
34˚
38˚
41˚
Frozen
Temperature Sensitive
-20˚
45˚
0˚
55˚
5˚
75˚
March 2015
11
(chocolate or other products)
34˚
38˚
40˚
Minimum
Target
Maximum
NA
+18.0˚
NA
Refrigerated
+0.1˚
+2.0˚
+4.0˚
Frozen
-23.0˚
-18.0˚
-15.0˚
per
agreement
with buyer
per
agreement
with buyer
per agreement
with buyer
Ready-To-Eat Fish or Fishery Products
EMEA Temperature Range (˚C)
Ambient/Room Temperature
Temperature Sensitive
(chocolate, fruit or other products)
Greater China
Product
Category
Temperature Requirement
Delivery
During Storage
Prior to
During Transport
Loading
Frozen
<= -23℃ to -12℃
-12°C (max)
<= -23℃ to -12°C
Chilled
Temperature
0°C to 5°C
18°C to 22°C
0°C to 5°C
18°C
0°C to 5°C
5°C to 25°C
Comments
Freezer must
be set to -18°C
b. For non-ambient shipments, the Supplier must notate the specific product
temperature requirements on the BOL/AWB/CMR (e.g. Product must remain
between 10 and 20 degrees Fahrenheit [F]/Celsius [C]”) (Requirement waived
for Greater China). Clear terminology on the legal document regarding
product and performance expectations for the carrier is critical. For nonambient shipments to or within EMEA, temperatures must be notated in
degrees Celsius.
c. For non-ambient shipments, the Supplier is required to ensure that the trailer
has reached the target temperature prior to loading. This requirement is to
ensure that the equipment being used to transfer freight is capable of reaching
the target temperature.
d. The Supplier is required to apply a temperature monitoring device to the
outside of a case on the last pallet loaded at the time of shipping.
e. The Supplier shall validate that the equipment being used to transfer the
freight is suitable for the product type being shipped. If the trailer is not
suitable for transport, the Supplier has the ability to reject the trailer.
f. Drop shipped product may require additional or different which will be
confirmed by the authorized Starbucks Buyer.
March 2015
12
3.1.8 Labeling Requirements
3.1.8.1 General Labels for Pallets, Cases and Inner Packaging
a. China & Asia Pacific (CAP) – Contact Starbucks CAP regulatory
team to ensure the inner pack and outer carton requirements are
fulfilled. See Starbucks Supplier Guidance – References (Table 1)
b. Labels shall be designed and positioned on the pallet, case and inner
packaging in a manner that the required information is easily
accessible and can be correctly identified.
c. Labels must be clear and legible, with a minimum font size of
12 points. Information may be directly printed onto a case if all of
the information Requirements have been met. English is the
standard for labels, but for some specific markets Starbucks may
request additional language(s). Local language is allowed for
deliveries to consolidated distribution centers (CDC’s)
d. Labels shall include a “header” that precedes the information
contained on the label (i.e. “Expiration Date/Best Before Date would
precede “01-JAN-2013”. See Figure 1).
e. Cases and Pallets - The following label information is required:

Order Number (standard PO, blanket-release combination, or
delivery ID [DID] number).
-
When items are shipped in full pallet quantities and the Order
Number is on the pallet label, unless otherwise
communicated, the Order Number may be omitted from the
case label.
-
Items used in store construction, such as furniture and
fixtures, must always have the order number marked on each
case.

Starbucks Item Number / SKU (provided on the Order)

Item description

Lot Code - if available

Production Date - Format: DD-MMM-YYYY. Some markets in
EMEA require dates in numerical format (DD-MM-YYYY).
March 2015
13

Expiration Date (Best Before Date in EMEA) - if product expires
(Format: DD-MMM-YYYY). Some markets in EMEA require
dates in numerical format (DD-MM-YYYY).

Country of Origin

Manufacturing Site ID (MID)

Quantity of each level of packaging (Cases, inner packs, units)

Some specific Markets may require additional or different
information as communicated by the Authorized Buyer
f. Inner Packaging – For items manufactured exclusively for Starbucks,
include the same information that is printed on the case labels on any
inner packaging that is packaged for shipment (excluding display
packaging). Note that Starbucks may identify additional label
requirements during the label approval process.
Figure 1 is an example of a label that shows the information required on labels for
pallets and cases (note that the format used in this example is not a requirement).
Figure 1. Example Label
Header (required) – Identifies the
information in the second
column.
Order Number:
SKU:
Description:
Lot:
Production Date:
Expiration / BBD:
COO:
MID:
Quantity:
12345678
7654321
Prickly Pear Tea 50 ct.
L1234
01-SEP-2013
01-DEC-2014
US
ABCDEFG12345
50 Cases, 200 units
3.1.8.2 Special Labels – Warning Labels
Warning labels are intended to provide information to support correct
handling and accurate receipt. The Supplier should design, size, color
and position these labels to enable them to be immediately visible and
unmistakably clear. Types of warning labels include:
a. Mixed Pallet Labels – Label pallets that contain mixed product
(SKU, Lot and/or Order) as a mixed pallet. Also indicate the
different product that is contained on the pallet.
March 2015
14
b. “Do Not Double-Stack” Pallet Labels – Label pallets that cannot
be double-stacked with warning labels to prevent double-stacking by
anyone handling the product.
c. Fragile Labels – Label cases and pallets that contain fragile items
with a “Fragile” label.
3.1.8.3 Barcoded Universal Product Code Labels
Some items are required to have the Universal Product Code (UPC) or
other identifying number barcoded in a standard format on the case label
and/or the individual item. Starbucks will notify the Supplier at the time
of item setup if a barcoded UPC label is required on an item/sellable unit.
3.1.8.4 Global Trade Item Number and License Plate Barcode Labels
a. Starbucks has implemented the usage of GS1’s Global Trade Item
Number (GTIN) authorized barcodes and LPN barcode labels to
facilitate the receiving process using scanning technology. The
Authorized Representative will provide detailed label specifications
to the Supplier.
b. Suppliers are expected to keep current, and as applicable, conform to
barcode standards published by GS1. Suppliers may refer to the GS1
website at www.gs1.org for information on current barcode
Requirements and standards. Supplier UPC labels may be used under
certain circumstances when approved by the Authorized
Representative. When suppliers provide UPC/GTINs to Starbucks,
the UPC/GTIN must comply with GTIN rules (i.e., check digit
validation).
c. When requested by the Authorized Representative, products must be
labeled at the item level (smallest product or sellable unit) with GS1authorized standard barcodes, in either EAN-13 or UCC-12, unless
otherwise directed by the Authorized Representative. Truncated
barcodes may be authorized when space is limited on the package.
d. GS1 barcodes have been implemented based on the destination of
the shipment as shown in Table 3.
March 2015
15
Table 3. Usage of GS1 Barcodes
North America and
Latin America
• Inner packs
• Fixed quantity cases
• Fixed quantity pallets
Asia Pacific
Inner packs
only
EMEA
• Inner packs
• Fixed quantity
cases
• Fixed quantity
pallets
e. License plate barcode labels shall be applied onto each logistic unit
when requested by the Authorized Representative. License plates
contain a serial shipping container code (SSCC) number to uniquely
identify each logistic unit (e.g. case, pallet, or container) and to
facilitate tracking of shipments with a random set of contents. Upon
request, supplier shall send electronic files containing the data
related to the SSCC18 number by means of Electronic Data
Interchange (EDI).
f. The size of the barcode varies based on the application. A “limited
space option” may be available, but barcodes should meet the
“standard” minimum size listed in Table 4 whenever possible.
Table 4. Size Specifications for Barcodes
Barcode Type
Minimum Width
Minimum Height
Item (standard)
29.93 mm (1.175 in.)
20.73 mm (0.82 in.)
Item (limited space)
61.6 mm (2.4 in.)
15.2 mm (0.6 in.)
Inner Pack, Case,
Pallet
77 mm (3.03 in.)
19.05 mm (0.75 in.)
License Plate
(standard)
88.07 mm (3.48 in.)
License Plate
(limited space)
70.46 mm (2.08 in.)
The larger of 12.7 mm
(0.5 in.) or 15% of the
width
The larger of 10.16 mm
(0.4 in.) or 15% of the
width
3.1.9 Country of Origin
Suppliers are responsible for ensuring that their product is marked with the
country of origin (COO) (e.g. the country where the product being received was
manufactured) according to the laws of the country into which the product is
being delivered. For example, products for the U.S. must meet U.S. laws and
regulations as stated in the 19 U.S.C. 1304, and any other applicable special
marking Requirements as identified in 19 CFR 134.43.
March 2015
16
Product packaging on an outer retail case must be marked with the COO on both
the case and on the individual items. Prior to commencing shipment, Suppliers
shall contact the Authorized Representative regarding COO marking
Requirements.
Upon request, Suppliers are required to provide additional documentation to
support the need for country of origin information.
3.2
Transportation / Shipping
3.2.1 Cargo Security
a. The Supplier shall maintain container and trailer integrity to protect
against the introduction of unauthorized material and/or persons into
the Starbucks supply chain.
b. The Supplier shall not fumigate containers and/or trailers unless other
requirements are specified by Starbucks in advance.
c. All Suppliers and the third parties with whom they conduct business
shall have, at a minimum, the following container and trailer security
measures in place:

Container Inspection – Written procedures to verify the physical
integrity of the container structure prior to packing shall include a
seven-point inspection process to be completed on all containers
and trailers (refer to Starbucks Container Seven-Point Inspection
Guide, or reference www.cbp.gov for C-TPAT Importer Security
Criteria,

Seals – At the location where loading occurs, the Supplier shall
affix a high-security seal to all full load containers that meet or
exceed PAS ISO 17712.
-
Suppliers shall record seal numbers as required by the
BOL/AWB/CMR section (handwritten seal numbers are not
acceptable).
-
If the seal is removed in-transit by anyone (including
government officials), a replacement seal must be affixed to the
container/trailer and the seal change must be documented on
the BOL/AWB/CMR.
-
When a seal is broken, the provider/Supplier must immediately
notify Starbucks at [email protected] to
communicate:
o The number of the broken seal;
March 2015
17
o Who broke the seal; and
o The number of the replacement seal affixed to the
container/trailer.

Container/Trailer Storage – Containers/trailers are to be stored in
a secure area to prevent unauthorized access and/or manipulation.
Procedures must be in place for reporting and neutralizing
unauthorized entry into containers or container storage areas.
In the event of a suspected security event (Greater China excluded),
the Supplier shall advise Starbucks of the event details via the
cargo security email box at [email protected] (include
the identifying container/trailer number in the subject line of the
email), and/or via other forms of communication appropriate for
the circumstances (Greater China – contact your primary sourcing
contact). The load will then be immediately halted within the
supply chain and will not be received while the event is being
investigated.
Note: Additional security measures are detailed in Supplier
Guidance Expectations - Supplier Security Protocol
3.2.2 Freight Terms – Global (Excluding North America)
a. Starbucks uses Incoterms 2010® freight terms for all shipments,
unless specified otherwise on the order. Information about
Incoterms® is available from the International Chamber of Commerce
website at www.iccwbo.org.
b. The Supplier shall be responsible for compliance with freight terms,
specified shipment or arrival dates and named places described on
each order. Any questions about the terms or dates listed on an order
should be directed to the Authorized Representative.
c. In order for shipments to be turned over to Starbucks at or near origin
(Incoterms® EXW, FCA, FAS, FOB), a Starbucks-nominated Cargo
Management Service (CMS) provider will accept the booking; collect
and forward all relevant shipping and commercial documents; and
secure transit for the goods from the named place to final destination.
d. In order for shipments to be turned over to Starbucks control at the
port of discharge or any other defined place (Incoterms® CFR, CPT,
CIP, CIF, DAT, DAP), the Supplier shall be responsible for all transit
times and for shipping to the named place as specified by the
Incoterms® and any other special instructions included on the
shipment order.
March 2015
18
e. In order for shipments to be turned over to Starbucks control at
destination (Incoterms® DDP), the Supplier shall be responsible for all
transit times, shipping and customs/import documentation and delivery
to final destination as specified by the Incoterms® and any other
special instructions included on the order.
f. In all cases, the Supplier shall be responsible for arranging the
shipment and the schedule to meet each ship date or arrival date at the
final destination and the named place stated on the Order.
3.2.3 Freight Terms – North America
In lieu of Incoterms®, Starbucks may use three other freight terms for
shipments within or between the U.S. and Canada. Purchase orders shall
list the named place where Starbucks agrees to assume risk of loss and
take title to the goods (a.k.a. “origin” address for third party, or a
“destination” address for Freight Prepaid and Prepay and Add). These
three terms and their definitions include:
1. Freight Prepaid
a. The Supplier shall be responsible for paying the freight carrier for the
cost of transporting goods from the Supplier location to the destination
(named place).
b. If the goods cross the U.S./Canada border, the Supplier is the Importer
of Record and shall be responsible for clearing customs, including
preparing all documents and paying all duties, taxes, brokerage fees
and/or any other related costs.
c. Transportation costs shall be negotiated with the Authorized
Representative and are embedded in the total costs. Transportation
costs are not invoiced to Starbucks, either as a line item on a product
invoice or as a separate invoice.
2. Prepay and Add
a. The Supplier shall be responsible for paying the freight carrier for
the cost of transporting goods from the Supplier location to the
destination (named place).
b. If the goods cross the U.S./Canada border, the Supplier is the
Importer of Record and shall be responsible for clearing customs,
including preparing all documents and paying all duties, taxes,
brokers fees or any other related costs. The Supplier shall invoice
Starbucks for the transportation costs.
3. Third Party
March 2015
19
a. Starbucks shall be responsible for paying the freight carrier for the
cost of transporting goods from the Supplier location (named
place) to the destination.
b. If the goods cross the U.S./Canada border, Starbucks is the
Importer of Record and shall be responsible for clearing customs
and paying all duties, taxes, broker fees or any other related costs.
The Supplier shall be responsible for preparing all customs
documents and providing the necessary documents to the carrier
and customs broker.
For Freight Prepaid, Prepay and Add terms, Starbucks may recommend a
specific carrier, but will normally leave carrier selection to the Supplier.
3.2.4 Booking Requirements – International
When booking international shipments of Starbucks-managed freight,
please refer to the appropriate CMS provider’s booking Requirements.
The key booking Requirements include:
a. Supplier must book at least 14 days prior to the Ready-to-Ship date as
listed on the Purchase Order.
b. Supplier must follow the CMS booking instructions, including the use
of the online booking tool.
c. Supplier must provide the required documents no later than 2 business
days after the estimated time of shipment.
d. Contact Starbucks at [email protected] if further
instructions are needed.
e. Refer to sections relating to small parcel shipments.
3.2.5 Booking Requirements – Intra U.S./Canada
When booking shipments of Starbucks-managed freight intra-US/Canada,
the Supplier shall book with the Transportation Management Center
(TMC).
a. Appointments to pick up shipments are required to be made at the time
of booking. The Supplier shall book transportation by 12:00 noon
Central Time at least 2 business days prior to the pickup appointment
through TMC. Starbucks Transportation has the right to refuse
shipments with less than 2 business days’ notice. One business day
notice is required to cancel pickup appointments.
March 2015
20
b. When scheduling the pickup appointment, the Supplier must clearly
communicate the purchase order (PO) number or specified Starbucks
reference number, the number of pallets, weight of the shipment,
pickup location, destination location and ready-to-ship date listed on
the PO. In addition, the Supplier shall stipulate any special equipment
types that are needed (i.e., refrigerated service with the specified
temperature range), lift-gate Requirements and the mode (i.e., if
shipping via air freight).
c. Contact [email protected] if further instructions are
needed.
d. Refer to sections relating to small parcel shipments.
3.2.6 Booking Requirements – Intra Asia
When booking intra-Asia shipments of Starbucks-managed freight, the
Supplier shall abide by the following Requirements:
a. Supplier shall book at least 14 days prior to the Ready-to-Ship date
listed on the Purchase Order.
b. Supplier must provide the required documents to the CMS provider no
later than 1 day prior to the Estimated Time of Departure.
c. Refer to sections relating to small parcel shipments.
3.3
Shipment Documentation – General Requirements
3.3.1 Shipping – Hazard Materials
a. The Supplier shall include a Material Safety Data Sheet ([MSDS],
OSHA Form 20, IMDG certificate or equivalent) with any shipment
that contains hazardous material.
b. A 24-hour emergency contact must be notated on the BOL, AWB,
CMR and other relevant transportation documents for all hazardous
material shipments.
c. For deliveries to or within North America, the appropriate hazardous
material numbers (United Nations or North American) must be notated
on the BOL, AWB, CMR and all other relevant transportation
documents.
d. The proper hazardous materials identification number should be
included on all paperwork for HAZMAT shipments. This requirement
is in addition to the requirement of supplying the MSDS, OSHA Form
20, IMDG certificate or equivalent.
March 2015
21
3.3.2 Delivery and Shipping Documentation
a. A shipping document (i.e. Packing List for North America or Delivery
Note for EMEA) shall accompany each shipment and meet the
following requirements:
•
Each PO must have a separate shipping document.
•
The language standard on delivery and shipping documentation is
English although local language is acceptable for deliveries to
Consolidated Distribution Centers.
•
The shipping document must be accessible, preferably attached to
the upper right-hand corner of the upper right-hand case of the
leading pallet as the delivery is unloaded.
•
All shipping documents must include specific information based
on the receiving region, as shown in Table 5:
Table 5. Information Required on Shipping Documents
North America &
Latin America
EMEA
Asia
Pacific
“Ship From” name, address and contact
X
X
X
“Ship To/Sold To” name, address and
contact
X
X
X
PO Number
X
X
X
Manufacturing Site ID Number
(assigned by Starbucks)
X
X
X
Country of Origin / Manufacture
X
X
X
Starbucks Item number
X
X
X
X
X
X
X
X
X
X
X
X
X
Data Element
Total Shipment Quantity in the unit of
measure listed on the PO
Total Number of Cases (or units) Per
Item
Ship Date
X
Supplier Name and Address
X
Item Description (as listed on the PO)
X
Expected Delivery Date
Gross Weight per Item (kg)
X
X
X
Total volume per Item (CBM / m3)
X
X
X
March 2015
22
Lot Codes
X
X
X
Production Dates
X
X
X
Expiration / BB Dates
X
X
X
X = Required
Blank = Optional, but required if specified by the Authorized Representative.
Date format is DD-MM-YYYY unless otherwise approved.
b. One BOL (or Air Way Bill (AWB) for air freight) must accompany each
shipment and must include specific information based on the receiving region,
as shown in Table 6.
Table 6. Information Required on Bill of Lading
North America &
Latin America
EMEA
Asia
Pacific
X
X
X
Ship Date (DD-MMM-YYYY)
X
X
X
BOL Number
X
X
X
NMFC Class Rating
X
Carrier Name
X
PRO Number (if LTL)
X
X
X
Total Number of Pallets in the shipment
X
X
X
Number of Cases (or units) per pallet
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Data Element
“Ship From” and “Ship To” name,
address and contact
Gross Weight of shipment listed in
pounds (lbs.) or kilograms (kg)
PO Number(s) (or specified Reference
Number)
Freight Terms (and Bill To information
if third-party freight)
Note stating “Lift Gate Required” for
large or heavy items that require lifting,
that exceed OSHA standards and are
being delivered to a non-warehouse
location.
Special Handling Requirements (e.g.
“Do Not Double-Stack,” “Do Not Break
Stretch Wrap,” “Do Not Freeze”)
Note stating “All shipments require a
delivery appointment”
Container/Trailer Security Seal
Number(s)
March 2015
23
Temperature requirements (if applicable)
X
X
X
c. For EMEA only, road shipments (including containers transported by road)
transporter shall provide a completed CMR document, mentioning Starbucks
PO number, booking reference, pallet/colli number, gross weight and any
other relevant information such as temperature and ventilation requirements.
Transporter shall provide minimal 2 copies (transporter and receiver copy).
d. For shipments within North America with freight terms of “Third Party” only,
Suppliers shall add “Third Party Billing” to the BOL and include the
following information on the BOL and the commercial invoice or customs
invoice:
•
•
TMC Shipment ID Number

Shipments managed by TMC will contain a TMC Shipment ID
Number (referred to as the “CHR Number”) in the booking
confirmation. This number is a required reference on the BOL for the
Carrier.

The TMC Shipment ID Number is a 10-digit number beginning with
“1.”
Freight billing address:
Starbucks Coffee Company
c/o US Bank Freight Payments
1000 East Warrenville Road, Suite 350
Naperville, IL 60563
e. Delivery appointments for TMC tendered shipments. Delivery appointment must
be included on the BOL as provided by TMC. Delivery appointments must be
taken directly from the load confirmation provided by the transportation
provider.
3.3.3 Commercial Documentation – International Border Crossings
a. These Requirements are subject to change at any time, based on specific
country requirements/regulations.
b. Suppliers who are the importer of record are responsible for meeting all
customs and clearance Requirements for the country of import.
c. If Starbucks is the importer of record, the Supplier must prepare and complete
proper commercial documentation that meets the Requirements of the country
of import and any additional Requirements as listed in Table 6. All
documentation must be signed by the Supplier or the shipper.
March 2015
24
d. Unless the freight terms require the Supplier to assume risk until the
destination is reached, the complete document package must be submitted to
Starbucks, its custom clearance agents and the receiving warehouse no later
than 48 hours prior to departure for airfreight and 72 hours for all other freight
types after departure from the country of export.
e. Shipments into Canada- Documentation must be provided to customs no later
than 4 hours prior to the expected border crossing; although Starbucks
recommends paperwork is submitted at the time of shipment departure.
f. The standard contents of the commercial documentation packet are based on
the receiving region, as listed in Table 7:
Table 7. Commercial Documentation - Packet Contents
Data Element
North America
Latin America
EMEA
Asia Pacific
China
Commercial
Invoice or
Customs Invoice
1 Copy
1 Copy
1 Copy
1 Copy
Packing List
1 Copy
1 Copy
1 Copy
1 Copy
1 Copy
3 Copies Total
(2 originals +
1 copy)
3 Copies Total
(2 originals +
1 copy)
1 copy for SWB
(tel-released) or
a whole set of
BOL originals
1 Copy
2 Copies Total
(1 original +
1 copy)
1 Copy
1 Original
1 Copy
Products
containing
ingredients
from animals
(i.e, dairy, eggs):
1 original +
1 copy
Bill of Lading
Origin Certificate
(if required for
product)
Health Certificate
(if required for
product)
Load Plan (by
container with
clearly marked
pallet and
container
numbers)
Generalized
Systems
Preference (GSP)
Certificate (FarEast air shipments
only)
1 Copy
2 Copies Total
(1 original +
1 copy)
1 Copy
1 Copy
1 Copy
2 Copies Total
(1 original +
1copy)
March 2015
1 Copy
25
Data Element
North America
Latin America
EUR1 Movement
Certificate or
preferential origin
statement on
invoice (for
products with
Swiss preferential
origin if
applicable)
Fumigation
Certificate
(for container
shipments
originating
outside EMEA
and US/Canada
only)
CMR (for intra
EMEA road
shipments,
including
containers)
Non-Wood
Packing Material
Certificate if
applicable. Must
have 2 IPPC
stamps on wooden
pallets/ packages
confirming wood
has been treated
per Requirements.
EMEA
Asia Pacific
China
2 Copies Total
(1 original +
1copy)
1 Copy
Minimal 2
copies
(transporter and
receiver copy)
1 Copy
(if certificate)
1 Copy
Certificate of
Analyses (if
required for
product in specific
markets)
1 Copy
3.3.4 Commercial Invoice Requirements – International Border Crossings
a. A commercial invoice or customs invoice is required for all shipments
crossing international borders.
b. If a commercial invoice is not generated because there is no sale involved
(e.g. product/samples provided at no charge), a customs invoice must be
prepared in lieu of a commercial invoice when the product will cross an
international border. The customs invoice must contain all the information
required on a commercial invoice. The value of the product must be based on
March 2015
26
“fair market value” or the price that would be paid if the item were offered for
sale. It is acceptable to show on a customs invoice, “Value for Customs
Purposes Only.”
c. Requirements for commercial invoices vary, based on the region or country of
import. Any additional or different Requirements for a specific country or
shipment will be communicated by Starbucks prior to the shipment.
d. The standard elements of a commercial invoice are listed below. If the item is
a “gift pack” with multiple components, the item information (i.e., item, price,
weight, tariff code, country of origin) must be listed for each component.
Shipment Information
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Name of the Supplier/Shipper
Physical Address of the Supplier/Shipper
Ship-to Name and Address (consignee) (see Canada note below)
Ship-from Location Name and Physical Address
Sold-to Name and Address (see Canada note below)
Port of Loading and Unloading (if applicable)
Supplier’s Invoice Number and Date
Starbucks or Purchaser’s PO Number
Case Marks and Numbers
Number of Cases
Total Invoice Value and Currency
Total Invoice Quantities
All charges on the products, itemized by name and amount, including
freight, insurance, commissions, containers and cost of packaging
All products and services furnished for the production of the products not
included in the itemized price (e.g. assists and tooling), except design,
artwork, or engineering plans or sketches done in the importing country.
Terms of Payment
Any other transportation-related information (e.g. Vessel Name, BOL
Number, Mode)
Name of responsible individual at the supplier/shipper who has knowledge
of the transaction
Freight Terms (Incoterms unless otherwise specified in the PO)
Packaging Type (cases, bags, etc.)
Page Number (e.g. 1 of 2)
Item Information
•
•
Starbucks Item number (if applicable)
Description as listed on PO. This must be a complete description that
clearly states what the item is, including the chief material the item is
March 2015
27
•
•
•
•
•
•
•
•
•
made from and how the item is used, in order to meet Customs authority
Requirements.
Unit of Measure as listed on PO
Net Weight of each item
Gross Weight of each item
Unit Price and Extended Value
Currency
Name and physical Address of Manufacturer
Country of Origin/Manufacture
Tariff Code
Serial Number (if applicable)
Country and Region Specific Requirements
•
For shipments entering the U.S., add (to the Commercial Invoice or as an
attachment):

Manufacturing Facility FDA Number (food items only)
• For shipments into Canada purchased by a Starbucks distributor under
“Third Party” freight terms:


•
For shipments from an EU country to a non-EU country, add the following
statement:

•
“For export supply: 0% VAT / Exempt from VAT According to Art.
146(1)(a) of the VAT Directive”
For shipments between EU countries and part of the VAT area, add the
following statement:

•
Sold-to Name and Address will not be an entry on the invoice.
Consignee will be entered as “Starbucks C/O” and Ship-to address will
be purchaser’s address.
“For intra-community supply: 0% VAT / Exempt from VAT
According to Art. 128 VAT Directive”
For shipments to the UAE, add (to the commercial invoice or as an
attachment):

Manufacturer’s Name, Address, City, State/Province, Country (all
items)
March 2015
28
3.4
Customs and Import Clearance
When Starbucks is the importer of record (freight terms: EXW, FAS, FCA, FOB,
CFR, CPT, CIP, CIF, DAP and DAT or third party), Suppliers shall send the
correct customs documentation to the Starbucks-appointed CMS provider and the
provider will work directly with the customs broker.
When the supplier is the importer of record (freight terms: DDP, Freight Prepaid
or Prepay and ADD), the Supplier should make the necessary arrangements with a
customs broker to clear the shipment through customs and pay any clearance and
duty-related charges.
In case of DDP shipments into EMEA, the Tax and Customs team must be
contacted (via +31 (0)20 3077000) to provide guidance on how to handle the
import VAT.
The supplier is responsible for following the importing country’s customs laws
and regulations when generating documents, marking products, and shipping
product, regardless of who is the importer of record.
3.4.1 Authorized Customs Brokers
Refer to the Table 7 in the Reference Section of Supplier Guidance for a
list of authorized customs brokers.
3.4.2 Customs – Importer Security Filing
a. An Importer Security Filing (also called “ISF” or “10+2”) shall be
made by a Starbucks customs broker on all shipments entering the
United States via ocean carrier. Compliance is mandatory and is
required by Customs. All Starbucks Suppliers shall provide
information to the Starbucks CMS provider to support this process.
b. Whenever Starbucks is the importer of record into the U.S., or is the
ultimate consignee for cargo entering the U.S., Suppliers must provide
additional data elements to enable ISF compliance. This requirement
applies to all freight terms and also to Supplier-managed freight.
c. In order to comply with the ISF process, Suppliers shall work with
Starbucks approved carriers and/or customs brokers to provide ISF
data.
d. Suppliers shall include a complete an accurate Manufacturing Site
Identification (MID) number at the time of booking. Failure to do so
may result in missed security filings. Suppliers should contact the
Damco office at origin for additional directions if needed.
March 2015
29
e. For cargo not shipped via Damco, Suppliers must contact OHL
International no later than 2 business days prior to the cargo being
loaded onboard a vessel at the foreign port of lading. OHL can be
reached by telephone at 425-656-5710, by fax at 425-251-4567 or by
emailing at [email protected].
3.4.3 U.S. Customs – 24-Hour Rule
Carriers of containerized and bulk ocean freight are required to present
timely and accurate information to U.S. Customs regarding the shipped
cargo at least 24 hours before loading on a vessel making a call on a U.S.
port. Compliance with the rule is mandatory and all Starbucks Suppliers
must provide information when necessary to support this program.
Suppliers may contact the CMS provider at the port of loading with
questions regarding the 24-Hour Rule.
3.4.4 Preferential Import Scheme - Documentation Required
Suppliers may be requested to provide documentation in order for
Starbucks to qualify for preferred tariffs at the moment of import into the
country of destination. The requested documentation is normally a Proof
of Preferential Origin, such as but not limited to:
a. Movement Certificates EUR.1
b. Invoice Statements
c. Certificates of Origin Form A
3.5
Carriers and Shipping Modes
3.5.1 Carrier Selection
a. For Supplier-managed freight terms, the Supplier is responsible for
allowing adequate transit time to meet the “Arrival Date Final
Destination” stated on the PO and verifying the transit time at the time
of dispatch.
b. For Starbucks-managed freight terms, the Supplier is responsible for
booking shipments with Starbucks carriers with adequate lead time to
meet the “Ready to Ship Date” stated on the PO and verifying transit
time at the time of dispatch. If the transit time is uncertain, please
confirm with your carrier or the contacts listed in this section before a
booking is made. Any accessorial, detention or expedite amounts
charged to Starbucks as a result of the Supplier’s noncompliance will
be charged back to the account of the Supplier.
March 2015
30
3.5.2 EMEA Carriers
Contact the EMEA Transportation Department in Amsterdam at
Telephone: +31 (0)20 3077000
3.5.3 Asia Pacific Carriers
Refer to the Starbucks Coffee Company Asia Pacific Routing Guide for
Inbound Logistics for Starbucks-designated carriers. For a copy of this
guide, contact the Asia Pacific Transportation Department in Hong Kong
via telephone at (852) 2283 1130.
3.5.4 North American Carriers - Shipments Within or Between the
U.S. and/or Canada
Suppliers shall use the following instructions for Starbucks-managed
shipments. Contact the Starbucks Transportation Department
at [email protected] for more information.
a. LTL, full truckload, intermodal and temperature control
shipments – Contact the Starbucks Transportation provider, TMC, at
the number listed below.




TMC Managed TMS Main telephone number: 1-800-967-9619
Office hours: 6:00 AM to 4:00 PM (Pacific Standard Time)
After hours cell phone number: 1-952-683-5584
Via email: [email protected]
Suppliers using the TMC system will receive training and support
from the TMC Operations Team.
b. Parcel shipments, except to/from/within Canada – All parcel
shipments, except to/from/within Canada, must be shipped via FedEx.
Suppliers are divided into two categories (all Suppliers, independent of
category, must contact their Authorized Representative to initiate this
process):


Frequent shippers are those suppliers expected to ship more than
25 small parcel shipments per day from a shipping location.
Frequent shippers will be assigned a unique account number to use
for shipping on behalf of Starbucks.
Infrequent shippers are those suppliers expected to ship less than
25 small parcel shipments per day from a shipping location.
Infrequent shippers are required to use the Starbucks supplier
shipping portal to generate a shipping label.
March 2015
31

Starbucks will provide Suppliers with a field requirements
reference guide by shipper type. Failure to comply with the
requirements outlined in this document may result in the
chargeback of freight costs.
c. Parcel Shipments to/from and within Canada – All Canadian parcel
shipments should be shipped via Purolator. The PO number must be
listed in the “Reference” field.

Contact: Starbucks Transportation
at [email protected]
d. Air Freight – For all air freight shipments exceeding FedEx or
Purolator weight and size limits originating in the U.S. or Canada,
Suppliers must contact their assigned Starbucks planner to initiate the
expedite approval process.
3.5.5 Shipping Mode Selection
The following Requirements apply to selecting the proper mode for
Starbucks-managed shipments:
a. Air Shipments/Freight – Any air shipments for either small parcels or
freight must be pre-approved by the Authorized Representative.
b. Full Container Load (FCL) – For shipments weighing between
11,025 pounds (lbs.) (5,000 kg) and 37,486 lbs. (17,000 kg) or
measuring between 352.94 cubic feet (10 cubic meters) and 882.35
cubic feet (25 cubic meters), Suppliers shall use 20-foot containers.
For shipments weighing over 37,486 lbs. (1,700 kg) or measuring over
882.35 cubic feet (25 cubic meters), Suppliers shall use 40-ft.
containers.
c. Full Truck Load (FTL) – For shipments weighing over 10,000 lbs.
(4,535 kg) or measuring 1,500 cubic feet (42.5 cubic meters).
d. Intermodal – For shipments that meet FTL criteria, travel at least 700
miles (1,125 km) and have adequate lead times, intermodal service (a
combination of over-the-road and rail service) may be a lower cost
transportation solution. Suppliers shall contact Authorized
Representative to investigate this option.
e. Less than Truckload (LTL) – For shipments weighing between 326
lbs. (148 kg) and 10,000 lbs. (4,535 kg), or weighing 11,025 lbs.
(5,000 kg) and measuring less than 1,500 cubic feet (42.5 cubic
meters).
March 2015
32
f. Asia Pacific Less Than Container Load (LCL) – For shipments
weighing between 251 lbs. (114 kg) and 11,025 lbs. (5,000 kg) and
measuring under 352.94 cubic feet (10 cubic meters).
g. Small Parcel Carriers – For shipments with a total weight less than
326 lbs. (148 kg) and no one case weighing over 150 lbs. (68 kg). The
maximum length per parcel of any one side measures 108 inches (270
cm) and the maximum size per parcel is 165 inches (419 cm) measured
as length + girth.
3.6
Delivery Appointments – Supplier-Managed Freight
a. Suppliers shall book dock appointments with the destination location (RDC,
CDC or construction site) as early as possible but no less than 24 hours in
advance of the due date. This may be extended to 3 business days during the
peak season (September 1 through December 15). Emergency air shipment
appointments will be accepted with one business days’ notice. Deliveries
without appointments will generally be refused and any detention charges that
result will be charged directly to the Supplier’s account.
b. The PO number and number of pallets in the shipment are required before a
dock appointment time will be assigned.
c. DC phone numbers are listed on the PO. Additional resources are provided in
Supplier Guidance – Reference, Reference Tables. Contact the Authorized
Representative for more information.
d. Shipments arriving more than 15 minutes after the scheduled appointment are
considered late. The receiving distribution facility (DC) can refuse late
deliveries and require that a new appointment be scheduled. Any detention
charges that result will be charged to the account of the Supplier if the
shipment has Supplier-managed freight terms on the PO. Arriving early does
not guarantee early unloading.
e. Dock appointments for ocean shipments to Asia Pacific will be made by the
local DC, based on the unloading schedule and free storage period to arrange
haulage. Usually it will take 5 business days on average to transport shipments
from port to a DC.
3.7
Supplier Performance - Packing & Shipping Requirements
Failure to meet the Requirements outlined in this Supplier Guidebook, or any
other Requirements communicated by a Starbucks representative, will be
considered non-compliant unless explicit formal authorization for exception is
granted by the authorized Starbucks representative. Suppliers are responsible for
meeting all Requirements.
March 2015
33
To rectify instances of non-compliance, Starbucks may:
a. Return the product to the Supplier using a Starbucks transportation provider;
and/or
b. Elect not to pay for unusable product; and/or
c. Charge the Supplier for all costs associated with the non-compliance, such as:





Costs to rework product to bring it into compliance
Costs to handle and dispose of unusable product
All transportation costs associated with non-compliant product
All associated storage costs
All associated administrative and processing costs
The Authorized Representative will provide Suppliers with detailed information
about the instance of non-compliance, as well as the resulting actions taken.
March 2015
34

Supplier Guidance Global Requirements

Transcription

Similar documents

R.O. Writer

Offer great coffee with touch-screen design.

Malia Valchar of Montclair, New Jersey

read more

SOCIAL NETWORK MARKETING:

Kayode Fatoba - Independent Electoral Commission

STARBUCKS

CIOMAX - Background