MH IQORON Broschüre - MANN+HUMMEL Industriefiltration

The compact power pack with high
performance cyclone technology
IQORON-V 4.5 air cleaner
Photo: istockphoto.com / © tverkhovinets
An intelligent solution
The IQORON-V 4.5, the smallest air cleaner of the IQORON V series, is designed for flow rates up to 4.5 m³/min.
It is characterised by high performance, a small installation space and easy maintenance. The two-stage air
cleaners of the IQORON-V series are suitable for machines operating under heavy dust conditions and cover
nominal flow rates from 2 to 14 m³/min. MANN+HUMMEL meets the current and future requirements for greater
air throughput with reduced installation space and is therefore the ideal solution for compact applications.
The outstanding features of the IQORON-V 4.5:
• the straight air flow makes the air cleaner particularly
suitable for tight installation conditions
• the CompacPleat filter element and highly efficient
pre-separation with multi-cyclone block result in
longer service life
• a pre-separation efficiency with dust discharge valve
higher than 90%, and with scavenging up to 96%
• the compact oval design requires less space
• highest operational reliability achieved through filter
element with axial seal and additional secondary
element with radial seal
• easy monitoring of the dust load through integrated
connection for service switch
• easy access to clean multi-cyclone block through
central screw
• environmental-friendly disposal through metal-free
filter elements (fully incinerable)
• quick first fitting through mounting points integrated
on housing with variable installation positions for easy
adjustment to many installation space requirements
• maintenance friendly through self-holding end caps
with distinctive colouring
IQORON-V 4.5
Dimensions and part numbers
50
393.3 ±5
50
393.3 ±5
143.1
155 ±1
143.1
72.5
22
72.5
22
31.7
204 ±3
254.8
204 ±3
254.8
31.7
Ø 80 ±1
Ø 82 ±1
Ø 80 ±1
Ø 82 ±1
172 ±1 77
244 ±1
172 ±1273.1
244 ±1
273.1
222
222
2
77
2
155 ±1
Picture 1
75 ±1
92 ±1
75 ±1
92 ±1
95 ±0.7
Ø40.2 ±0.5
118.9
141.1
Ø40.2 ±0.5
118.9
141.1
95 ±0.7
143.1
118.9
141.1
72.5
22
Picture 2
Ø40.2 ±0.5
Size
Nominal
flow rate
[m³/min]
IQORON-V
4.5
4.5
Part no.
Picture
Replacement filter element
without
with
MANN-FILTER
MANN-FILTER
secondary element secondary element main element secondary element
1
45 180 95 911
45 180 95 910
2
45 180 95 913
45 180 95 912
C 22 041
CF 1941
Replacement parts
Part no.
Size
Picture
Cyclone block
IQORON-V 4.5
1
45 180 12 988
2
45 180 12 999
Dust discharge
valve
39 000 40 731
Replacement filter element
MANN-FILTER
MANN-FILTER
main element secondary element
C 22 041
CF 1941
Weight
[kg]
2.83
IQORON-V 4.5
Component parts
Cyclone block
Main element
Secondary element
Dust discharge valve
Filter housing
M8 threaded inserts
(option for M10 or
UNC 3/8“-16)
Through-hole
The housing is made from robust plastic reinforced with fibreglass. The advantages of this material are its mechanical load
capacity and wide range of operating temperatures. As a result,
IQORON-V 4.5 can be used in continuous operation in temperatures up to +100°C and for short periods of time up to +120°C.
The connection of a service switch or indicator is possible directly
on the housing. The mounting possibilities are integrated in the
housing as standard. On request different threaded inserts are
available for M8 screws.
Flow characteristics
Flow resistance [mbar]
Flow characteristics for flow rates as per ISO 5011
50
40
30
20
10
0
0
1
2
3
4
5
6
7
Volume flow V˙ [m3/min]
with secondary element
without secondary element
Flow resistance [mbar]
Flow characteristics for dust capacity as per ISO 5011
80
70
60
50
40
30
20
10
0
0
500
1.000
1.500
with secondary element
without secondary element
2.000
2.500
3.000
3.500
Dust capacity [g]
Specifications
• Operating temperatures for continuous operation:
-40°C to +100°C / +120°C for a short time
• Tightening torque for mounting screws:
Threaded inserts: 15 ±3 Nm
Through-hole: 23 Nm
• Tightening toque for hose clamp (on the clean side):
max. 5 +0.5 Nm
• Housing material: PA6 GF30
MANN+HUMMEL Group
The company develops, produces and
sells technically complex components
and systems for the automotive industry
and many other fields. A key area is high
quality filtration products for vehicles,
engines and industrial applications.
The OEM business with global market
leaders and producers of vehicles,
machines and installations defines
the quality and performance of the
products. Filters for the international
aftermarket are sold under numerous
international brands as well as under
the group‘s own MANN-FILTER brand.
MANN+HUMMEL GMBH
67346 Speyer · Germany
Tel.: +49 (62 32) 53-80
Fax: +49 (62 32) 53-88 99
[email protected]
www.mann-hummel.com
Catalogues: www.mann-hummel.com/en/corp/services/catalogues
MANN+HUMMEL Industrial Filtration
The Industrial Filtration Business Unit
with its headquarters in Speyer
(Germany) is specialised in meeting
the requirements of off-highway vehicle
and engine applications, compressed
air and vacuum technology, mechanical
engineering and plant construction.
For these and other industrial fields
MANN+HUMMEL Industrial Filtration
offers high performance products for
the filtration and separation of air, gases
and liquids.
Thanks to an efficient and well-organised
partner network and global sales network the products are readily available
at almost all locations.
W9 941 22 101 en 0215 Printed in Germany © MANN+HUMMEL GmbH
The MANN+HUMMEL Group is a
company with international operations and employs around 15,200
people worldwide at 60 international
locations.