DDPS OptiMix Reactors - De Dietrich Process Systems

Transcription

DDPS OptiMix Reactors - De Dietrich Process Systems
OPTIMIX®
INTEGRAL BAFFLE DESIGN
Product Description
Exclusively from De Dietrich Process Systems, OptiMix® offers
tremendous optimization of the mixing performance of glasslined steel reactors by integrating three baffles on the vessel
wall. This patented design enhances heat transfer, solids
suspension and distribution, gas dispersion, gas flow rates,
and mass transfer.
Product Features
OptiMix reactors are lined with 3009 glass for superior corrosion resistance. All clamped-top/CTJ OptiMix reactors come
standard equipped with a pitched-blade turbine; closedwelded/GL OptiMix reactors include a GlasLock agitator with
adjustable blades. A fixed speed drive is vertically mounted
to keep nozzles and accessories unobstructed for operational
use.
Specifications
•
Volumes from 30 to 2,000 gallons (clamped-top/CTJ
series)
Volumes from 300 gallons (closed-welded/GL series)
Pressures from full vacuum to 90/150 psig (6/10 bar)
Temperatures from -20°F (-30ºC) to 500°F (260ºC)
•
•
•
Options
•
OptiMix baffles are also available in QVF borosilicate glass
reactor designs.
OptiMix baffles can be added to an existing vessel during
reglassing, allowing you to easily upgrade any reactor with
this technology.
•
OPTIMIX ADVANTAGES
•
•
•
•
Eliminates the need for top entry baffles, freeing
up an additional nozzle for process use.
Improves CIP efficiency by eliminating the difficult to clean top head pocket at the baffle/nozzle
interface.
Significantly reduces vortexing and splashing,
resulting in less product drying and sticking to the
heated wall above the liquid surface.
The symmetrical baffling of the OptiMix reactor
reduces shaft deflection and extends seal life by
minimizing the bending loads that are imposed on
the agitator shaft.
Temperature probe integrated in the wall
D005
10/2012
OPTIMIX-HE
Product Description
DDPS has combined the best technologies in glass-lining to produce a
process reactor of unequaled performance. With a HemiCoil split-pipe
jacketed reactor, heating and cooling media flow through the pipe coils
with high velocity and turbulence. As a result, film coefficients and heat
transfer rates are higher than in conventional jackets. By melding the advantages of the HemiCoil jacket with OptiMix’s three integral wall mounted
baffles, DDPS can now offer a high performance reactor with superior efficiencies in both mixing and heat transfer. The OptiMix-HE (Heat Exchange)
is a new design that circulates the heating and cooling media contained in
the HemiCoil jacket through the baffles, increasing heat transfer area by
up to 25% enabling a more homogeneous, faster thermal management.
Reactor with HemiCoil, agitation 110 rpm,
sulphuric acid, thermal fluid 150°C
Boost the Pumping Rate of your Agitation
Reactor with 45° flat blades, sulphuric acid
De
Systems,GmbH
Inc.
De Dietrich
Dietrich Process
Process Systems
244
Sheffield Street 36
Hattenbergstraße
Mountainside, NJ 07092
D-55122 Mainz
P 908.317.2585
www.ddpsinc.com
[email protected]
Tel.: +49
(0) 61 31/97 04-0
F 908.889.4960
[email protected]
www.qvf.com
Fax: +49 (0) 61 31/97 04-500
Copyright © De Dietrich Process Systems, Inc. All rights reserved. The information contained in this brochure is believed to be reliable general guidelines for consideration of the products and services described herein. The information is general in nature
and should not be considered applicable to any specific process or application. De Dietich Process Systems, Inc. expressly disclaims any warranty, expressed or implied of fitness for any specific purpose in connection with the information contained herein.