DDPS OptiSeal.indd - De Dietrich Process Systems

OPTISEAL
Product Description
The OptiSeal incorporates reliable vessel seal technology to
meet stringent process requirements in today’s pharmaceutical and chemical manufacturing environments. The innovative
seal technology was designed with many features that can
help users establish compliance with USP and BPE guidelines.
The OptiSeal designed for glass-lined reactors was developed
and tested in conjunction with A.W. Chesterton, one of the
world’s leading seal manufacturers. The OptiSeal is available
exclusively through De Dietrich Process Systems.
1
OptiSeal Advantages
2
The OptiSeal offers significant performance advantages over
competitive seal technologies and users employing this technology are setting process performance benchmarks.
OptiSeal technology has the lowest possible consumption/
leakage rate of nitrogen to process/atmosphere versus all other double seal technologies. Testing has shown that leakage/
consumption of the nitrogen barrier gas can range between
zero (measurable) and .01 SCFH. However, while negligible
leakage rates are achievable, equipment and operating conditions can also affect the leakage rates.
5
4
3
Performance Capabilities
•
•
Operating pressure up to 100 psig in the seal housing
Operating temperature from -20°F to 350°F
(-29°C to 177°C)
Operates in Full Vacuum conditions
.01 SCFH/inch of shaft diameter leak rate is possible
Applications outside of these ranges can be permissible,
consult factory.
•
•
•
6
PRODUCT FEATURES
•
•
•
•
•
•
•
No carbon dust contamination, eliminates process
contamination from mechanical seal face wear
True dry-running design, balanced double cartridge
seal, can be run with a barrier fluid
Designed to assist end users in complying with
GMP standards
Minimal maintenance after installation
Cost effective
Available with FDA compliant materials
Designed to help provide sanitary integrity in CIP/
SIP processes and can be customized to suit specific requirements
1 Ceramic Sleeve
2 PTFE Sealing Element
3 Stainless Steel Metal Seal
Housing
4 Ceramic Adapter
5 Ceramic Balance Piston
6 Agitator Shaft
D014
4/2012
OPTISEAL
Model
Nom. Shaft Size
Part #
DD In-Line
1
1 /2”
NM2375A
61Q 06
1
2 /2”
NM3500A
62Q 08
1
3 /8”
NM3520A
63Q 10
3 5/8”
NM3450A
63Q 12
1
4 /8”
NM3560A
64Q 16
1
5 /8”
NM3580A
64Q 24
1
6 /8”
NM3600A
QVF 50
32mm
NM32/50
QVF 80
44.5mm
NM44.5/80
QVF 100
44.5mm
NM44.5/100
3-4 DTW
3”
NM7034
3525 SRW
2 1/2”
NM7035
5RW
1
3 /2”
NM7050
2.5 DTW
1 /2”
NM7025
1
De
Dietrich Process Systems, Inc.
De Dietrich Process Systems GmbH
244
Sheffield Street 36
Hattenbergstraße
Mountainside, NJ 07092
D-55122 Mainz
P 908.317.2585
www.ddpsinc.com
[email protected]
Tel.: +49
(0) 61 31/97 04-0
F 908.889.4960
[email protected]
www.qvf.com
Fax: +49 (0) 61 31/97 04-500
Copyright © De Dietrich Process Systems, Inc. All rights reserved. The information contained in this brochure is believed to be reliable general guidelines for consideration of the products and services described herein. The information is general in nature
and should not be considered applicable to any specific process or application. De Dietich Process Systems, Inc. expressly disclaims any warranty, expressed or implied of fitness for any specific purpose in connection with the information contained herein.