Marco® Pipeline Blast Solutions - Brochure

PIPELINE BLAST SOLUTIONS
SURFACE PREPARATION TECHNOLOGY EXPERTISE
CUSTOM ENGINEERED AND MANUFACTURED SOLUTIONS
ADVANCED ABRASIVE BLASTING TECHNOLOGIES
EXTENSIVE IN-HOUSE INVENTORY
FULL-SERVICE MODERNIZATION AND REPAIR
BLACK BEAUTY® COAL SLAG
Blastmaster® C-Series
Abrasive Blasting Pot
ABRASIVE BLASTING
SINGLE-SOURCE SOLUTION
SINCE 1944.
Marco is the world’s
largest provider of
engineered solutions
and services for the
surface preparation
industry.
Marco is the only company in the surface preparation industry to provide a
single-source solution for all abrasive blasting needs.
Our team can provide the service, equipment, custom engineering, logistics
and account management that only an industry leader can deliver.
The Marco provides four pillars of solutions:
Marco
Services
Marco
Manufactured
Engineering &
Design
MARCO SERVICES:
•
Blast operations evaluation
•
Installation and repair
•
Field or in-house service
MARCO MANUFACTURED EQUIPMENT:
•
In-house, ISO certified manufacturing
•
Complete safety review
•
Customizable
MARCO ENGINEERING AND DESIGN:
•
In-house engineering team
•
Field evaluation and scope
•
Complete custom solution design
MARCO PROPRIETARY PRODUCTS:
•
Custom manufactured to Marco specifications
•
Exclusive to Marco
•
Superior performance
Proprietary
Products
Blastmaster® Abrasive
Blasting Pots
Blastmaster® Aftercooler
with Coalescing Tank
Blastmaster® Regulator
Abrasive Metering Valve
Abrasive Blasting Hose,
Fittings & Accessories
Blastmaster®
Abrasive Blasting Systems
Blastmaster® Remote Control
Switches
Blastmaster® Abrasive
Blasting Nozzles
PRODUCTIVITY SOLUTIONS
CUSTOM ENGINEERED SOLUTIONS FOR UNIQUE APPLICATIONS
Marco designs and engineers custom solutions for your unique production needs.
Custom Abrasive Blasting
System Configurations
•
•
•
•
•
•
Space constraints
Abrasive requirements
Height requirements
Serviceability needs
Productivity requirements
Material waste control
Advanced Training
and Technical
Support
•
•
•
Wide Variety of In-Stock Nozzles
•
•
•
Blastmaster® Angle Nozzles
Nozzle Washers
Nozzle Holders
•
On-site or off-site
Installation
Service and
maintenance
Startup and setup
Pipe Blasting Equipment
•
•
Wide variety
In-house inventory
Industry’s Largest Rental Fleet
•
•
•
•
300 pieces of equipment
Fleet age less than 3 years
Units undergo 20-point safety inspection
Consumables available for purchase or rent
Logistics and Abrasive
Distribution
•
•
•
North America’s largest abrasive distributor
Harsco (Reed) premier distributor for
Black Beauty® coal slag
Wide variety of sizes and packaging
available
Safety Products
•
•
•
•
•
•
•
NIOSH-approved blasting respirators and
consumables
Painting respirators
1000’s of safety products
Airline filters
Blast suits
Protective clothing
CO Monitors
BLASTMASTER® XTREME-DUTY®
ABRASIVE BLASTING HOSE
Ideal for long-lasting, mutli-use applications. Blastmaster Xtreme-Duty Abrasive Blasting
Hose surpasses the competition and is exclusive to Marco.You can also purchase other
abrasive blasting hose types, fittings and accessories from Marco.
RATED AT 150 PSI
WORKING PRESSURE
ADVANCED ABRASIONRESISTANT LINER
A unique formulation to Marco,
the composite material resists
hardening, cracking and flaking,
compared to traditional rubber
liners.
Quality and performance tested for
working under high pressure and
extreme conditions.
THICKEST INNER LINER
ON THE MARKET
Only available from Marco, the
5/16” thick inner liner is made
of advanced abrasion-resistant
material formulation, increasing
service life up to 150%.
STATIC ELECTRICITY
DISSIPATION
Unique amount of carbon black
is added to the hose liner to
dissipate static electricity and
reduce risk of spark.
PIN-PRICKED
COVER
Designed to be durable under
working conditions, resisting
tearing, puncturing, blistering
and aging from sun exposure.
MULTIPLE-USE
APPLICATIONS
Designed for longer-wear
applications, for multiple different
uses. Marco also offers heavyduty abrasive blasting hose for
single use applications.
DIN ABRASION WEAR
TESTED
DIN tests - measuring the
resistance to wear - prove
highest liner durability, with an
average rating of 58. Competitor
hoses have a higher average
rating of 100 and above, showing
greater wear. Like golf, lower DIN
scores are better!
4-PLY
CONSTRUCTION
Provides increased
durability and structural
integrity.
NEED A DIFFERENT HOSE
FOR A
ONE-TIME JOB?
Marco offers a wide variety of
hose types for all
budgets and applications.
BLASTMASTER® C-SERIES ABRASIVE
BLASTING POT
Blastmaster® 6.0 and 3.0 Cu. Ft. C-Series Abrasive Blasting Pots surpass the competition by
giving you much, much more for your investment.You can also purchase abrasive blasting
pot brands and wear parts from Marco.
FAIL-TO-SAFE REMOTE
CONTROL SYSTEM
Blastmaster 125 Remote Control
System allows operators to
remotely activate and deactivate
the abrasive blasting pot from the
nozzle. No pot tender needed!
Meets OSHA requirements.
GALVANIZED
PIPE FITTINGS
Coated to minimize corrosion
and increase the wear life of the
fittings.
16” SEMI PNEUMATIC
TIRES
Heavy-duty tires are long-lasting
and easy to handle across rough
or uneven surfaces without losing
traction.
90 DEGREE CONE
BOTTOM
Steeper than a traditional
60-degree cone, allowing material
to flow to the bottom of the vessel
more efficiently and reducing
clean-out time.
SUPERIOR MOBILITY
OPTIONS
Easy mobility through utilizing the offset
lifting lugs by crane or tilt back using the
heavy-duty handle to quickly maneuver
the abrasive blasting pot.
BLASTMASTER REGULATOR
ABRASIVE METERING VALVE
Allows the operator to set and
maintain a consistent flow of
abrasive, reducing abrasive
consumption and increasing
production rates at the nozzle.
REGIONAL LOCATIONS
Corporate Headquarters
Headquartered in Davenport, Iowa, the Marco Midwest Region
Office and Corporate Headquarters houses a team of over 100
customer service, technical specialists, product managers, sales
representatives, engineers and service technicians, serving the
Central Midwest and Western U.S.
Our 200,000 sq. ft. manufacturing and distribution facilities
produce and ship over 5,000 products each day, and are
staffed by a comprehensive and highly-trained team, including
fabrication, production, testing, assembly, quality assurance and
shipping departments. On-site, our facilities encompass the latest
technologies in abrasive blasting pot manufacturing, including
tube rollers, press brakes, bridgeports, and a full machining
center.
Gulf Region
The Marco Gulf Region Headquarters is strategically located in
Deer Park, TX, in the heart of petroleum country. Our 25,000 sq.
ft. location houses a complete warehouse and maintenance
facility, supported by a team of 40-year surface preparation
industry veterans, specializing in customer service, technical
support, installation, maintenance, rental and outside sales.
Marco also has fully stocked sales and service locations in
Corpus Christi, TX, Beaumont, TX, Harvey, LA, Lafayette, LA and
Pensacola, FL.
Northeast Region
The Marco Northeast Region Headquarters is located in a suburb
Youngstown, OH, serving the northern and southern east coast
regions. Our 25,000 sq. ft. facility includes dedicated technical,
sales and service teams and a complete inventory of abrasives,
blasting and paint supplies, 100-unit rental fleet, sundries and
much more.
ABRASIVES
BLASTING
COATING
ENGINEERED SYSTEMS
RENTAL
SAFETY
SERVICE & REPAIR
CONTACT MARCO
800.BLAST.IT
(800.252.7848)
563.324.2519
FAX: 563.324.6258
WWW.MARCO.US
[email protected]
Marco®, Blastmaster®, and Dustmaster® are registered trademarks of Marco Group International.
Lit# 101M516_11/13/2014