Flame-Polishing Equipment - MIG-O-MAT

Transcription

Flame-Polishing Equipment - MIG-O-MAT
Flame-Polishing Equipment
PRECISION
UNDER YOUR
CONTROL
LIGHT TORCH, ACCURATE FLAME –
BEST POLISHING RESULTS
Instead of bottled gas: The micro-flame gas generator produces by electrolysis
a hydrogen-oxygen mix, which burns away to nothing. The very light torch with
flexible gas hose facilitates effortless work and thus higher productivity. Compared
to the work with oxyacetylene blowpipes, the risk of initial edge fusing is much
reduced in case of flame polishing. Low operating costs and hazard potential in
comparison to working with pressure cylinder gas.
Micro-flame polishing equipment
MIG-O-MAT Micro-Flame Gas Generators* of type
«Lötstar» are not only used for soldering and welding
since many years, but also for flame polishing of acrylic
glass, and with outstanding results.
• Improved work results by a much reduced weight of the torch,
ensured constant gas composition and easily reproducible and
accurate flame geometry
FLAME-POLISHING
OF BORE HOLES
FOR ACCURATE WORK
COST-EFFECTIVE
ECOLOGICALLY FRIENDLY
• High acceptance by the operating personnel because of easier work
also during continuous operation
PRODUCTIVE
• Minor safety-related limitations regarding the installation site in
comparison with compressed gas cylinders
SAFE
• Equipment with different gas output for variable nozzle sizes and for
multi-user operation
• Low operating costs and high availability
FLAME-POLISHING
EQUIPMENT MADE IN
GERMANY
• Easiest operation by microprocessor control with free preselection of
the desired gas pressure
• Reduced maintenance effort by automatic refill unit for the distilled
water in case of Lötstar 245 (optional equipment on customer
request) and in case of Lötstar 600 (standard equipment)
• High working safety because of the separate safety pressure
controller, temperature control, flashback arrester, and thermally
controlled gas flow.
• Execution to German building regulation DIN 32 508 and accident
prevention regulation BGR 500
Maximum gas output [l/min]
Lötstar 145
Lötstar 176
Lötstar 245
Lötstar 600
120
170
200
600
MIG·O·MAT® Mikrofügetechnik GmbH · Werksstraße 20 · 57299 Burbach
Phone +49 (0) 2736 4154-0 · Fax +49 (0) 2736 4154-99 · E-Mail [email protected]
www.mig-o-mat.com