ProFlame+™ Utility Grade Flame Scanner
Transcription
ProFlame+™ Utility Grade Flame Scanner
® ProFlame+™ Utility Grade Flame Scanner Model ZPF-1100UV / Model ZPF-1100IR / Model ZPF-1100DS The ZEECO® ProFlame+™ integrated flame scanner revolutionizes the industry by providing reliable flame detection and superior background flame discrimination for safer operation. Easily configurable set points using intuitive PC-based software also allows for in-depth flame analysis. Design Features and Benefits Operating Environment • UV or IR models available • Temperature: -20°C (-4°F) to +70°C (158°F) • Compact, fully integrated and exceptionally reliable • Relative humidity: 0% to 95% non-condensing • State-of-the-art digital signal processing for easy flame analysis • Environmental protection rating: IP 66, NEMA 4X • Easily configurable frequency and gain settings for simple set-up • Hazardous rating: II 2 G Ex d IIC T6; II 2 D IP 66 T 80°C • Intuitive PC-based software to assist in troubleshooting • Weight: 8.8 Lbs (4.0 kg) • Microprocessor-based with electronic self-check for SIL3 applications • Mounting: 1" NPT F (BSP available) • Durable housing for a variety of operating environments • Housing material: aluminum, painted finish • Independently adjustable Flame-On and Flame-Off response times: 1-6 sec. • Cable: fixed 10' (3m) long 8 conductor cable • Reliable 0/4-to-20 mA flame intensity output ® BURNERS FLARES INCINERATORS PARTS & SERVICE Model ZPF-1100UV / Model ZPF-1100IR / Model ZPF-1100DS Operating Parameters - Input Operating Parameters – Output Input voltage Supply voltage: 24V dc +10%-15% Output relay: SPDT, Flame-On is the N.O. contact and Flame-Off is the N.C. contact Power consumption: 4 W Contact rating: 48V dc at 1.0 A Purge air Flame intensity output: 0/4 to 20 mA referenced to 24V dc common; 250Ω max load resistance Cool, dry, clean air: 5 scfm (142 l/min) at 5” wc (12.5 mbar) above windbox or furnace pressure (sight tube exit point), ≤ 38°C (100°F) at wye fitting Flame status indication: Yellow LED for local Flame-On indication and Green LED for intensity. Flame signal trending, flame relay, marginal relay, flicker frequency, flame amplitude and raw signal analysis via PC-based scanner software. ZEECO® combustion and environmental solutions are designed and manufactured to comply with applicable local and international standards as defined by our customers. ZEECO GERMANY ZEECO CANADA REGISTERED ISO 9001: 2008 CERTIFICATION APPLIES TO ZEECO HEADQUARTERS ONLY. Zeeco Global Headquarters 22151 East 91st Street ZEECO RUSSIA ZEECO POLAND ZEECO EUROPE ZEECO WINFIELD ZEECO CORPORATE HEADQUARTERS ZEECO ASIA ZEECO FRANCE ZEECO CONNECTICUT ZEECO HOUSTON ZEECO MEXICO Broken Arrow, Oklahoma 74014 USA ZEECO CHINA ZEECO ITALY ZEECO UAE ZEECO MIDDLE EAST ZEECO JAPAN/APPLICOT ZEECO INDIA ZEECO SE ASIA Phone: +1 918 258 8551 Fax: +1 918 251 5519 E-mail: [email protected] Zeeco.com ZEECO is a registered trademark of Zeeco, Inc. in the U.S. ZEECO office, affiliate, sales, representative, or third party representative/licensee offices. © COPYRIGHT 2015 - ZEECO, INC. ALL RIGHTS RESERVED ZEECO BRAZIL ZEECO AUSTRALIA ® 15–PF+ rev 2
Similar documents
ProFlame™ Integrated Flame Scanner
Flame status indication: Flame-On LED, Flame-Off LED, Flame intensity bar graph
More information