view
Transcription
view
bafM;k ;quk;VsM feYl] ua- 5 India United Mills No. 5 A unit of NTC Ltd. (Western Region), A Govt of India Undertaking A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68 Email -: indu.05hotmail.com / Website: www.ntcltd.co.in Ref: 5/Job/2015 Date: 02.05.2015 Indent No.5/Job/Eng/02 Date: 18.04.2015 To M/s ____________________________ ________________________________ ________________________________ ________________________________ ________________________________ Sub: General civil Job work on Labour charges basis. for carrying out petty Misc civil work at mill premises for the period of May 2015 to Oct. 2015 Dear Sir, Enclosed please find here with a tender document with Terms & Condition. You are requested to submit your offer complete in all respect in a sealed envelop Positively on or before due date i.e. 15 .05.2015. Thanking You Yours faithfully Joint Manager (Material) bafM;k ;quk;VsM feYl] ua- 5 India United Mills No. 5 A unit of NTC Ltd. (Western Region), A Govt of India Undertaking A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68 Email -: indu.05hotmail.com / Website: www.ntcltdwr.co.in ANNEXURE “A” Sub: General civil Job work on Labour charges basis. for carrying out petty Misc civil work at mill premises for the period of May 2015 to Oct. 2015 Sr. No. 1 2 3 4 5 6 7 8 9 10 Nature of work Unit Labour charges /Unit (Rs.) Existing Plaster breaking & new plastering 1: 4 mortal & Sq, ft,/Brass finishing plaster thickness 20 mm or match finish with existing plaster. Construction of new brick wall.9”to 14” . Sq, ft,/Brass Construction of dobber wall 14” x 18” Sq. ft./Brass Only new plastering with 1.4 mortal finishing plaster thickness Sq. ft./Brass 20mm To be making & constructing water proof mortal 1:4 , 8” thick Running watta at the junction of A.C cement sheet & wall along to the Meter Peripheri of wall. To plastering RCC Slab /Piller prior to that, the corrosive steel Sq. ft. to be clean and apply the anti rsusting liquid treatment. To demolition of existing RCC slab, Piller and remove the Cubic ft. debris, then dump at provided area. To fixing of Kota Ladi ( on the cement mortal 1: 4 including Per Sq. Ft. making Kota Ladi in line and level Polishing of Led Kota Ladi for finish with two coat. Per Sq. Ft. To fixing of Ceramic tiles on wall, floor area in line and level Per Sq. Ft The all above 1 to 10 items are purely on labour charges basis . All required material will be provided by the mill. Rate to be quoted along with scaffolding for all items Yours faithfully Joint Manager (Material) bafM;k ;quk;VsM feYl] ua- 5 India United Mills No. 5 A unit of NTC Ltd. (Western Region), A Govt of India Undertaking A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68 Email -: indu.05hotmail.com / Website: www.ntcltdwr.co.in ANNEXURE “B” TERMS & CONDITIONS: 1) You will have to use own tools and gadgets required for the job and scaffolding if required. 2) Rate to be quoted on Labour charges basis. All other required material will be provided by mill. 3) All statutory Rules ESIC/PF/IT/ Service Tax are applicable you will have to drawn Insurance, policy under workmen compensation act cover your workmen for accident/injury while carrying/out work in Mills you will be solely responsible as well liable for any accident/injury to your workers. 4) Job to be done without damaging Mills property. In case of damage it will be recovered from you if contract is entrusted with you. 5) You will have to make enter the name of your employees in Mill gate Register regularly during the period of work. 6) You will have to make entries of all materials brought by you for the job work in gates entry Register. Material brought to be offered to the Inspection of Mill Engineer and after his approval it is to be used. 7) Payment: a. 100% payment will be made on satisfactory completion of work. 8) At every stage of work you should report Mill’s Engineer. Yours faithfully Joint Manager (Material)