Shoei XR1100 Helmet Range

Transcription

Shoei XR1100 Helmet Range
REVOLUTIONARY NEW DESIGN
SHOEI is proud to introduce the all-new XR-1100,
THE FINEST SPORT-TOURING HELMET MONEY
CAN BUY!
The all-new, groundbreaking XR-1100 - where aggressive styling meets SHOEI’s unrivalled attention to detail, and the
evolution of perfection continues.
Shell-Integrated Spoiler
New shell forming technology created during the development of SHOEI’s groundbreaking VFX-W motocross helmet has allowed SHOEI to
eliminate the need for the plastic Aero Wing that was found on the XR-1000. This new technology has allowed SHOEI to incorporate the
aerodynamic advantages of a spoiler into the shell of the helmet, while maintaining consistent shell thickness to guarantee perfect strength and
weight. This shell-integrated spoiler works to reduce lift during high-speed riding, just like the spoiler on a sports car.
5 Shell Sizes
While some of our competitors rely on foam padding for fitting a wide range of customers, SHOEI offers an industry-leading five shell sizes in the
new X-Twelve to ensure a custom fit for heads between the sizes of XS-XXL.
AIM+ Shell Construction (Snell M2010-Approved)
SHOEI’s unique AIM+ technology combines fibreglass with organic fibres that are so strong they can only be cut with a laser. The end result is a
stronger, lighter shell that will absorb and distribute massive impact forces safely and efficiently.
Interior System
The XR-1100 is equipped with a fully removable, washable, and replaceable 3D center pad and multi-layer cheek pads. The XR-1100’s 3D center
pad components are three-dimensionally shaped to match the contours of a rider’s head. This 3D fitment allows us to provide a helmet with
an extremely comfortable fit, while maintaining the firm hold that is necessary for distraction-free, high-speed riding. The XR-1100’s multi-layer
cheek pads are available in six different thicknesses to allow riders to customize the fit of their new helmet. In addition, the liner features eye-glass
channels and an integrated neck pad.
Dual-Layer EPS Liner
Dual layer EPS foam liner offers vastly enhanced safety. Increased Impact absorption is acheived by adjusting thickness and density in key areas.
Inner liner features air channels for efficient cooling. Full circcumference Impact-absorbing EPS liner is fitted throughout the entire chin bar for
premium face protection
Variable Ventilation System
The XR-1100’s new shell features three (3) intake and six (6) exhaust vents in total. Wind tunnel testing revealed that the optimal location
for exhaust vents is high on the rear portion of the helmet’s shell. Better ventilation and aerodynamic performance is achieved by separating
the spoiler and exhaust vents. The exhaust vent holes have been relocated to take better advantage of negative pressure suction, dramatically
improving exhaust ventilation. SHOEI’s variable ventilation system allows riders to select the perfect balance between airflow and silence.
Q.R.S.A. (Quick Release Self-Adjusting) Base Plate System
SHOEI’s Quick Release Self-Adjusting (QRSA) base plate system includes a locking mechanism that allows you to change visors faster than any
other helmet available!
The QRSA maintains its predecessor’s easy-to-use features—split-seceond visor release and attachment, and visor preset lever. SHOEI’s new patented
new spring-loaded technology featured in the QRSA eliminates the need to adjust base plates for proper sealing. Every time the shield is lowered, the
spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a perfect wind and waterproof seal every time!
CW-1 Visor
The all-new CW-1 shield offers greater vertical and peripheral vision than the CX-IV that it replaces. In addition, the CW-1 shield protects
SHOEI riders from 99% of the sun’s damaging UVA and UVB rays, and our three-dimensional injection-molding process ensures optically perfect,
distortion free vision. Another advantage of the CW-1 shield is it comes with pins for SHOEI’s optional Pinlock system.
Insert the accessory Pinlock film to deliver fog-free vision in even the most
challenging conditions. The new CW-1 Pinlock lens is 30% larger, and offers
fog-free viewing to the very top of the helmet’s larger eye port.
Chin Curtain
Breath Guard
The chin curtain can be inserted into the lower edge of
the chin bar to reduce wind turbulence and noise.
The breath guard can be inserted into the upper edge of the chin bar to
help reduce fogging by diverted exhausted breath down out the bottom
of the helmet.
Intercom System Compatible
A space is secured in a liner to equip intercom speaker sold in the
market for requirement of a rider equipping intercom.
Snell M2010 Certified
The XR-1100 helmet passes the prestigious SNELL M2010 standard
that came into effect on October 1st 2009. The XR-1100 is the first
Snell M2010 Certified helmet to be available in Australia!
The testing procedure for the SNELL M2010 standard now calls for
graduated headforms of different weights. With previous standards
(M2005, M2000 etc), every headform weighed the same regardless of
helmet size. That allowed some manufacturers to get away with fewer
shell sizes while producing helmets with more rigid shells. Please note
the Snell label on the back of the helmet says only “Snell Approved.”
Customers must look inside the helmet, behind the liner, to see that it
meets the newer standard.
CHIN CURTAIN D
SHOEI XR1100
1108454
BASE PLATE
SHOEI CW-1 VISOR BASE PLATE
SHOEI CW-1 VISOR BASE PLATE SCREW KIT
1108228
1108232
SIZE
XXS
XS
S
M
L
XL
XXL
HAT SIZE
6 3/8 - 6 1/2
6 5/8 - 6 3/4
6 7/8 - 7
7 1/8 - 7 1/4
7 3/8 - 7 1/2
7 5/8 - 7 3/4
7 7/8 - 8
CM
51 - 52
53 - 54
55 - 56
57 - 58
59 - 60
61 - 62
63 - 64
3D CROWN CENTRE PAD
SHOEI XR1100 CENTER PAD XS13 (FITS XXS ONLY)
SHOEI XR1100 CENTER PAD XS9 (FITS XS ONLY)
SHOEI XR1100 CENTER PAD S9 (FITS S ONLY)
SHOEI XR1100 CENTER PAD M9 (FITS M ONLY)
SHOEI XR1100 CENTER PAD L9 (FITS L ONLY)
SHOEI XR1100 CENTER PAD XL9 (STD IN XL )
SHOEI XR1100 CENTER PAD XL5 (STD IN XXL )
INCHES
20 1/8 - 20 1/2
20 7/8 - 21 1/4
21 5/8 - 22
22 1/2 - 22 7/8
23 1/4 - 23 5/8
24 - 24 3/8
24 3/4 - 25 1/8
1108446
1108447
1108448
1108449
1108450
1108451
1108452
BREATH GUARD F
SHOEI XR1100
1108453
PINLOCK SERVICE KIT (FILM) TO FIT CW-1 VISORS
PINLOCK CW-1 KIT SERVICE KIT STANDARD CLEAR
PINLOCK CW-1 KIT SERVICE KIT STANDARD DARK TINT
PINLOCK CW-1 KIT SERVICE KIT STANDARD AMBER
1108526
1108527
1108528
VISORS
CW-1 CLEAR
CW-1 TINT
CW-1 DARK TINT
CW-1 CHROME IRIDIUM
CW-1 GOLD IRIDIUM
CW-1 BLUE IRIDIUM
CW-1 HI DEF
1108228
1108232
1108229
1108227
1108230
1108226
1108231
XR-1100 CHEEK PADS
CHEEK PAD 31 mm (STD IN SIZE XXL)
CHEEK PAD 33 mm (OPTIONAL)
CHEEK PAD 35 mm (STD IN SIZES XS, S, M, L, XL)
CHEEK PAD 37 mm (OPTIONAL)
CHEEK PAD 39 mm (STD IN SIZE XXS)
CHEEK PAD 41 mm (OPTIONAL)
CW-1 HI DEF
1108440
1108441
1108442
1108443
1108444
1108445
1108231
DIABOLIC
CIMMERIAN
TC-5
SEVER 2
TC-1
CONQUISTA
TC-5
WARLORD
TC-5
SYLVAN
TC-9
SYLVAN
TC-5
MONOLITH
TC-2
MONOLITH
TC-5
SOLID
ANTHRACITE
METALLIC
SOLID
MATT DEEP
GREY
Accessories
·Breath Guard (Optional)
·Chin Curtain (Included)
·Nylon Drawstring Helmet Bag (Included)
·Air Mask (Optional)
SYLVAN
TC-7
MONOLITH
TC-1
SOLID
BLACK
SOLID
MATT BLACK
SOLID
WHITE