DIY - Transportable
Transcription
DIY - Transportable
DIY - Transportable DIY - Transportable Steel weighbridge DIY model is a steel deck weighbridge that delivers proven performance at an affordable price . It is designed in two parts, for quick and easy installation . The first , is the main body which consists of three or five drive modules depending on weighbridge length. Steel foundation can be mounted underneath each module (as an option). The second part, are the side frames which are bolted on each side of the drive modules (yellow painted parts in pictures). These frames work also as guide rails avoiding trucks driving out of the weighbridge. Factory pre-mounted load cells come as standard equipment of the scale. Installation time on site is reduced in half a day (all load cells have two direction bumpers. Top access to load cells and junction box is possible for easy maintenance and service. Basic features • Pre-mounted load cells • Top access to load cells and junction box • Complete steel and modular construction • Perfectly suited for temporary sites • Side frames working as guide rails Options: • Pre-mounted, pre-fabricated steel foundation ( SF15 & SF140) • Transportable steel ramps • Galvanized version www.leon-engineering.com Features and Benefits DIY trasportable steel weighbridge Side frames as standard equipment Side frames are bolted on each side of the drive modules (yellow painted parts in pictures). These frames work as side rails guiding the truck driver and preventing the vehicle to getting out of the scale. Factory pre-mounted load cells Factory pre-mounted load cells come as standard equipment of the scale. As a result the installation time on site is reduced in half a day. (Note that all load cells have 2 direction bumpers. Top access to load cells and junction box allows easy maintenance and service. Finite Element Analysis (FEA) Technology Our structural design team incorporates the latest of Finite Element Analysis (FEA) technology to analyze in detail the exact stress condition of the weighbridge when subjected to operational and environmental loads. Thus an optimum and robust weighbridge design is achieved that ensures high durability and accurate functionality during operation. Technical Data DIY trasportable steel weighbridge Specifications Platform length Platform width Deck plate thickness 6m to 24m 3m 6mm or 8mm Profile 360mm Steel type ST37 Capacity Loading capacity 30 t scale length up to 9m 60 t scale length up to 18m 80 t scale length up to 24m 120 t scale length up to 20m 10t per truck axle - DIN 8119 20t per truck axle - DIN 1072 Recommended options & accessories SF15 & SF140 steel foundation SF15 and SF140 are pre-fabricated pre-mounted steel foundations that can be put directly on compacted earth, horizontal concrete surface with minimum reinforcement, or asphalt. This is a perfect solution for temporary sites like quarries, asphalt plants, etc Steel transportable ramps A set of four steel entry and exit ramps are available as an option with the following specifications: Width: 1200mm ,Height: a. 360mm (combined with existing concrete foundation) b. 375mm (combined with SF15 ) c. 500mm (combined with SF140 ) Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information DIY-1000 Transportable DIY-1000 Transportable Steel weighbridge DIY-1000 model is a steel deck weighbridge that delivers proven performance at an affordable price . It is designed in two parts, for quick and easy installation . The first , is the main body which consists of three or five drive modules depending on weighbridge length. Steel foundation can be mounted underneath each module (as an option). The second part, are the side frames which are bolted on each side of the drive modules (yellow painted parts in pictures). These frames work also as guide rails avoiding trucks driving out of the weighbridge. Factory pre-mounted load cells come as standard equipment of the scale. Installation time on site is reduced in half a day (all load cells have two direction bumpers. Top access to load cells and junction box is possible for easy maintenance and service. Basic features • Pre-mounted load cells • Top access to load cells and junction box • Complete steel and modular construction • Perfectly suited for temporary sites • Side frames working as guide rails Options: • Pre-mounted, pre-fabricated steel foundation ( SF15 & SF140) • Transportable steel ramps • Galvanized version www.leon-engineering.com Features and Benefits DIY-1000 trasportable steel weighbridge Side frames as standard equipment Side frames are bolted on each side of the drive modules (yellow painted parts in pictures). These frames work as side rails guiding the truck driver and preventing the vehicle to getting out of the scale. Factory pre-mounted load cells Factory pre-mounted load cells come as standard equipment of the scale. As a result the installation time on site is reduced in half a day. (Note that all load cells have 2 direction bumpers. Top access to load cells and junction box allows easy maintenance and service. Finite Element Analysis (FEA) Technology Our structural design team incorporates the latest of Finite Element Analysis (FEA) technology to analyze in detail the exact stress condition of the weighbridge when subjected to operational and environmental loads. Thus an optimum and robust weighbridge design is achieved that ensures high durability and accurate functionality during operation. Technical Data DIY-1000 trasportable steel weighbridge Specifications Platform length Platform width Deck plate thickness 6m to 24m 3m 6mm or 8mm Deck inner space Profile 1000mm 360mm Steel type ST37 Capacity Loading capacity 30 t scale length up to 12m 60 t scale length up to 18m 80 t scale length up to 24m up to 10t per truck axle Recommended options & accessories SF15 & SF140 steel foundation SF15 and SF140 are pre-fabricated pre-mounted steel foundations that can be put directly on compacted earth, horizontal concrete surface with minimum reinforcement, or asphalt. This is a perfect solution for temporary sites like quarries, asphalt plants, etc Steel transportable ramps A set of four steel entry and exit ramps are available as an option with the following specifications: Width: 1200mm ,Height: a. 360mm (combined with existing concrete foundation) b. 375mm (combined with SF15 ) c. 500mm (combined with SF140 ) Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information TS300 Trasportable TS300 Trasportable Steel weighbridge TS-300 has been designed on basis of our longtime experience in industrial weighing and with the application of the most modern components. It is a steel mobile weighbridge; an innovative design whish offers everything the users expect: Perfect weighing performance, strength, easy installation and maintenance, therefore a profitable investment. All weighbridge components are fully compliant to the European regulations and for legal metrology and to strict quality standards, offering a scale that will weigh accurately and trouble free over a lifetime under the harshest conditions. With our model TS-300 we offer you the opportunity to select a completely transportable weighbridge with many benefits. You no longer require special transport to move this weighbridge. A standard forklift truck will do for loading/ offloading and for the installation work. Basic features • Pre-mounted load cells • Only 300 mm high • Complete steel and modular construction • Designed for easy transportation • Very easy to install with no special foundation required Options: • Galvanized version • Transportable steel ramps www.leon-engineering.com Features and Benefits TS300 trasportable steel weighbridge Transportable modules The modules can be unloaded by 2 tons forklift without the need of cranes and other heavy equipment. Also there is no need for special foundations, as it can be installed on any, reasonable horizontal, concrete or asphalt surface (surface must be able to carry fully loaded truck) Factory pre-mounted load cells Factory pre-mounted load cells come as standard equipment of the scale. As a result the installation time on site is reduced in half a day. (Note that all load cells have 2 direction bumpers. Side access to load cells allows easy maintenance and service. Finite Element Analysis (FEA) Technology Our structural design team incorporates the latest of Finite Element Analysis (FEA) technology to analyze in detail the exact stress condition of the weighbridge when subjected to operational and environmental loads. Thus an optimum and robust weighbridge design is achieved that ensures high durability and accurate functionality during operation. Technical Data TS300 trasportable steel weighbridge Specifications Platform length Platform width 6m to 18m 3m Profile 300mm 1100mm (DIN8119) / 600mm (DIN1072) Deck inner space Steel type Capacity Loading capacity ST37 30 t scale length up to 12m 60 t scale length up to 18m 90 t scale length up to 18m (DIN1072) from 10t up to 15t per truck axle Recommended options & accessories Steel transportable ramps A set of four steel entry and exit ramps are available as an option with the following specifications: a. Width: 950mm ,Height: 300mm (DIN8119) b. Width: 1200mm ,Height: 300mm (DIN1072) Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information NT31 weighbridge NT 31 Pit mounted weighbridge NT31 model is a steel deck pit mounted weighbridge providing a free load carrying structure with an impressive life span. The main advantage of this scale is the ability to provide transversal crossing of the truck; Feature valuable in sites where space is limited. The modules (drive sections) are connected across with connective beams for the easier transportation and assembly of the weighbridge. A standard 2000kg capacity forklift truck is enough for loading / offlloading and for the installation work All weighbridge components are fully compliant to the European regulations and for legal metrology and to strict quality standards, offering a scale that will weigh accurately and trouble free over a lifetime under the harshest conditions. Based on our design and installation manuals, we offer to the customer a complete scale at economic cost, ensuring at the same time high standards in quality and reliability. Basic features • Transversal crossing of the truck • Top access to load cells and junction box • Complete steel and modular construction • DIN 8119 calculations. (12t/axle) • Approved to OIML and EU regulations Options: • Pre-fabricated pit walls • Heavy Duty version according DIN 1072 • Galvanized version www.leon-engineering.com Technical Data NT31 pit mounted weighbridge LxW (m) 6x3 9,2x3 12x3 14x3 15x3 16x3 18x3 18x3 18x3 18x3 18x3 18x4 Num. of loadcells 4 6 6 8 8 8 8 8 10 10 10 10 Weighing Capacity(t) 30 60 30 60 50 60 60 70 90 100 120 200 Loading Capacity - Max Tons / truck axle 11 16 11 16 11 11 11 12 16 17 20 35 Recommended options & accessories Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information NT31 Surface mounted NT 31 Surface mounted weighbridge NT31 model is a steel deck pit mounted weighbridge providing a free load carrying structure with an impressive life span. The main advantage of this scale is the ability to provide transversal crossing of the truck; Feature valuable in sites where space is limited. The modules (drive sections) are connected across with connective beams for the easier transportation and assembly of the weighbridge. A standard 2000kg capacity forklift truck is enough for loading / offlloading and for the installation work All weighbridge components are fully compliant to the European regulations and for legal metrology and to strict quality standards, offering a scale that will weigh accurately and trouble free over a lifetime under the harshest conditions. Based on our design and installation manuals, we offer to the customer a complete scale at economic cost, ensuring at the same time high standards in quality and reliability. Basic features • Top access to load cells and junction box • Complete steel and modular construction • DIN 1072 calculations / 40t twin axle • Approved to OIML and EU regulations • Top plate slip resistant (teardrop pattern) Options: • Galvanized version available • Rail scale version available. www.leon-engineering.com Technical Data NT31 surface mounted weighbridge LxW (m) 6x3 9,2x3 12x3 14x3 15x3 16x3 18x3 18x3 18x3 18x3 18x3 18x4 Num. of loadcells 4 6 6 8 8 8 8 8 10 10 10 10 Loading Capacity - Max Weighing Capacity(t) Tons / single truck axle 30 11 60 16 30 11 60 16 50 11 60 11 60 11 70 12 90 16 100 17 120 20 200 35 Concrete Ramps Leon Engineering provides civil drawings for weighbridge foundation and concrete ramps to be cast on site Deck Surface: Top plate slip resistant (teardrop pattern) Electronics Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions RC3/RC3D load cells Flintec compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information CP3000 SC - Pit mounted CP3000 SC - Pit mounted Concrete deck weighbridge CP 3000 SC is a pit mounted composite weighbridge , perfectly suited for sites with limited space. Sophisticated software tools and our long experience on weighbridge design,have been used to optimize the price/strength ratio. It is composed of a steel structure formwork, quality steel reinforcements,foundation plates with movement restrainers and high quality load cells of your choice out of our large stock . One of the advantages of CP 3000 SC is that the concrete deck has its own rigid formwork attached to the main body, which contributes to the overall structural integrity of the weighbridge. The main steel frame together with the reinforcing is delivered in parts easily bolt and assembled on site; for example the 18x3m model, it is composed of 6 pcs of approximate dimensions 6x1,6m , so when bolted together they compose a structure of 18x3m. This process reduces on-site large crane requirements(a fork lift is also enough) and also reduces transportation costs. The concrete can be poured on site even with the load cells already installed. Basic features • Deck is assembled directly on load cells or temporary columns at final position. No need of extra forming works,and no need to place the deck on the floor and lift it once the concrete is dry,as used to be until now. • Top access to load cells and junction box through removable steel covers • Modular construction for easy installation • In many cases two visits for installation are not necessary,but only one • Capacity according to DIN8119 (10t/axle) or 1072(20t/axle) Options: • Galvanized version www.leon-engineering.com Features and Benefits CP3000 SC - Pit mounted L R Modular installation During installation, the modules, left (L) and right (R) are assembled together to a single molule ready for concrete pouring (as shown above). Steel formwork The formwork is attached to the main body contributing to the overall structural integrity of the weighbridge. The main steel frame together with the reinforcement is delivered in parts easily bolted and assembled on site. Concrete to be poured on site The concrete can be poured on site with the load cells already installed. Normal concrete curing time applies. Finite Element Analysis (FEA) Technology Our structural design team incorporates the latest of Finite Element Analysis (FEA) technology to analyze in detail the exact stress condition of the weighbridge when subjected to operational and environmental loads. Thus an optimum and robust weighbridge design is achieved that ensures high durability and accurate functionality during operation. Technical Data CP3000 SC - Pit mounted Specifications Platform length Platform width 6m to 36m 3m Profile Deck type 510mm C20/25 Steel type S235 Capacity 30 t scale length up to 9m 60 t scale length up to 18m 80 t scale length up to 24m 120 t scale length up to 20m Loading capacity 10t per truck axle - DIN 8119 20t per truck axle - DIN 1072 Recommended options & accessories Pre-fabricated pit walls With the use of modular pre-fabricated pit walls there is no need for formwork. Their robust construction assists in retaining surrounding earth loads. Resulting to a time and material saving installation as well as a fully controlled and clean civil construction. LEWIS -Weighing Software The Weighbridge management Software LEWIS is a comprehensive and user friendly software package, developed by Leon Engineering for weighing and vehicle on control in weighbridge applications. Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information CP3000 SC weighbridge CP 3000 SC Concrete deck weighbridge CP 3000 SC is a economical ,modular composite weighbridge , that delivers great performance and durability at a low budget. Sophisticated software tools and our long experience on weighbridge design,have been used to optimize the price/strength ratio. It is composed of a steel structure formwork, quality steel reinforcements,foundation plates with movement restrainers and high quality load cells of your choice out of our large stock . One of the advantages of CP 3000 SC is that the concrete deck has its own rigid formwork attached to the main body, which contributes to the overall structural integrity of the weighbridge. The main steel frame together with the reinforcing is delivered in parts easily bolt and assembled on site; for example the 18x3m model, it is composed of 6 pcs of approximate dimensions 6x1,6m , so when bolted together they compose a structure of 18x3m. This process reduces on-site large crane requirements(a fork lift is also enough) and also reduces transportation costs. The concrete can be poured on site even with the load cells already installed. Basic features • Deck is assembled directly on load cells or temporary columns at final position. No need of extra forming works,and no need to place the deck on the floor and lift it once the concrete is dry,as used to be until now. • Top access to load cells and junction box through removable steel covers • Modular construction for easy installation • In many cases two visits for installation are not necessary,but only one • Capacity according to DIN8119 (10t/axle) or 1072(20t/axle) Options: • Galvanized version www.leon-engineering.com Technical Data CP3000 SC - Pit mounted Specifications Platform length Platform width 6m to 36m 3m Profile Deck type 450mm(DIN8119) / 480mm(DIN1072) C20/25 Steel type S235 Capacity 30 t scale length up to 9m 60 t scale length up to 18m 80 t scale length up to 24m 120 t scale length up to 20m Loading capacity from 10t up to 15t per truck axle Recommended options & accessories LEWIS -Weighing Software The Weighbridge management Software LEWIS is a comprehensive and user friendly software package, developed by Leon Engineering for weighing and vehicle on control in weighbridge applications. RD650 Remote Display The weighing remote display RD650 is a large digit, high visibility remote display. It provides fast and easy readings at long distance and under the hardest environments. Weighing indicator LD 5218 Leon Engineering indicator has an 16 character, LCD, backlit display, 14.5mm digit height . Functions: Automatic zero tracking, no motion detection, auto-zero on power-up, zero, tare (max tare effect =-Max), preset tare, net mode, multiple test functions Analogue load cells Flintec RC3 compression type load cells certified to OIML R60 and NTEP class IIIL. hermetically sealed steel load cell is rated IP68 for use in all environments. www.leon-engineering.com for more information
Similar documents
TS300 - Transportable Steel Weighbridge
This publication is issued by Leon Engineering to provide information regarding its products.
Leon Engineering reserves the right to alter without notice the specifications and design of
any of its...