Switchboard - LEVEL Group

Transcription

Switchboard - LEVEL Group
THERMOGRAPHY, INSPECTION & TEST OF
Switchboard
Infrared thermography
IR thermography is a powerful tool to identify
problems before they occur. Our subsidiary
Marin Elektro do IR thermography of bout lowand medium voltage switchboards.
It is also especially helpful for trouble shooting
potential electrical overloads, worn or bad circuit breakers and buses.
Mechanical machinery onboard vessels will also
benefit from thermal imaging, especially as
a pre-docking strategy to identify and target
equipment and systems which need attention
as well as to eliminate necessary work. IR thermography can be used to detect bad bearings,
shafts, worn pulleys or any application where
heat detection would be beneficial.
To prevent fire, damaged equipment and
downtime.
Test, Inspection and Service
of Marine Switchboards
Marin Elektro have service Engineers with vast
experience and knowledge to perform test,
inspection and service for all types of marine
switchboards.
•
•
•
•
•
•
•
Breaker service including cleaning, lubrication and function test (mechanical and electrical)
Generator and breaker protection test
Cleaning switchboard for excessive dust or dirt
Mechanical inspection
Inspection of busbar connections and isolators
Inspection of cable and terminal connections
Fault finding and replacement of components
THERMOGRAPHY, INSPECTION & TEST OF SWITCHBOARD
A service report for the performed work will be issued, with a list of recommended repairs
if applicable. In recent years, we have made major investments in top-of-the-line testing and
calibration equipment. This combination of expertise and cutting-edge equipment explains why
Marin Elektro is your foremost choice for thermography, megger tests, and safety inspections on
vessels and at offshore installations.
Level Group AS
P.O. Box 245 N-4299 Avaldsnes NORWAY
+47 959 66 000 [email protected]
www.levelgroup.no