English manual JXD921

DIGITAL PMP
USERS GUIDE
Thank you for purchasing our latest
product-PMP.please read the instruction
carefully for safe use. Recommend you to
keep this instruction manual for future
reference.
CONTENT
PC DEVICE-----------------------------------------1
NOTES----------------------------------------------2
PRODUCT INTRODUCTION--------------------4
FUNCTION INTRODUCTION-------------------5
BUTTON AND CONNECTOR-------------------6
BASIC OPERATION------------------------------7
OPERATION DETAILS---------------------------8
APPENDIX----------------------------------------27
TROUBLE SHOOTING--------------------------31
SPECIFICATION & ACCESSORIES----------32
PC DEVICE
1. PC s minimum system requirement
WIN98/ME/2000/XP, IBM compatible private
Computer, notebook.
Pentium 166MHz or above,
USB port,
32MB memory (64MB for WIN2000) or above,
20MB hard disk space
CD-ROM Drive
Sound card
Available for internet
2.Connect MP3 player to your PC
Using USB cable (it is supplied in the accessories)
connect USB port terminal from the player to USB
port at PC correctly.
Notice: please power on the player before insert
USB cable. Then turn on the player. Otherwise it
will influence the player s function. Other USB
cables than the provided USB cable should not
be used.
NOTES
Dear customer, thank you for choosing our
product,Really hope our products can bring
happiness to you.Please read the following
instruction carefully before your using.
1.Forbid to use in high temperature, high
humidity environment, especially don't use in the
high temperature bathroom.0 degrees Centigrade40 degrees Centigrade is the best working
temperature for Mp4;
2.Avoid to putting the MP4 player at the place
where the sunshine penetrate directly.
Insert or pull out the SD card should be on
the power off state, Because insert or pull out the
SD card might cause unpredictable damage to
Mp4;
4.put it in the place where the children can't
touching, avoid to touch the sharp object and
cause serious damage
5.Please don't dismantle the MP4 without
authorization . Please contact with distributor or
our company, if any query;
6.Please don't change the battery or poke the
battery , be care that the battery explodes and
hurts people, if put the battery into fire.
NOTES
7.Please don't use it at driving or your brain
need highly centralized.
8.We suggest customer copy the data due to
the data lose caused by unstable power,
otherwise our company will not responsible for
any damage.
9.when insert CD card ,please make sure
inserting direction,or damage SD card jack
self-worth.
PRODUCT INTRODUCTION
Product Introduction
1)MOVIE play function:
Used for playing the movie,
support MPEG-4 of ASF
format , or convert into
ASF format by software.
The play effection is 320x240
@30f/s
2)Audio play function,
used for playing various audio formats, including
MP3/WMA/WAV etc.
3)Photo browse function, used for browsing
various photos of digital camera, supports
EXIF2. 1.
4)Built-in Microphone record.
5)Video recording,AV In.
6) Av out NTSC/PAL
7)Calendar , game , clock indication.
8)Multiple languages setting
9)Insert SD/MMC card,enlarge memory space.
10)Bulit-in Lithium battery
11)Built-in speaker
12)press button with sound
13 Camera function(200 mega pixel)
14 PC-CAM function
FUNICTION INTRODUCTION
Function introduction
Video play
yes/no
Yes
Video recording
Yes
Music playing
Yes
Photo browsing
Digital recording
Yes
Yes
TV input
Yes
TV output
Yes
Game
Calendar
Memory checking
Multiple languages
Key Lock function
Screen protection
Yes
Yes
Yes
Yes
Yes
Yes
PC-CAM function
Camera function
Yes
E-book function
Yes
Yes
Yes
BUTTON AND CONNECTOR
BASIC OPERATION
Power on operation
Press Power On button, then
enter the menu stand-by
mode of PMP.
Power off operation
Press Power on button for 3 seconds to enter
power off state.
III Charge operation
Connect the charger to the power, and connect the
port with the PMP charge port. At this moment,
the PMP enter charge state and the power
instruction light is red.The charge time
is around 4 hours in usual. It is best on the
power off state to charge.
Notice:
Connect PC operation.
Power on the PMP player, use USB cable of the
accessoryies,connect the big side plug to the
PC's USB port,and connect the small side tothe
PMP USB port, then the PMP screen will show
the connection picture. At this moment, open PC,
you will find MOBILE DISK , open the first one is
EMS memory Disk ,the other is SD/MMC card port.,
If there are no card ,please take careful when use.
Removable Disk
OPERATION DETAILS
OPERATION DETAILS
I. Video operation:
1.Press
ower on button for long time to open Mp4
player and wait for the player entering stand-by interface.
2.Select Video play function by
/
button,
and press MENU
confirm.
3.After entering into operation
interface,press " /" " button to move cursor,select
video content which you want to play, press"PLAY"
button to play.
4.Before playing,press"MENU"to enter into setting,
press "+/-"button to selectEQ ,playing model,file
protection,delete option setting,Audio setting;
Audio Effection:Classical,Pop,Coherer,Jazz,Dbb,
Normal.
File Protection:write protection,release protectiong.
Delect option:delect one ,delect all.
Video Setting:8KHZ,16KHZ,24KHZ,32KHZ,48KHZ.
OPERATION DETAILS
OPERATION DETAILS
II.AUDIO PLAY
1.Turn on the Mp4 player.Press + / button to
select Audio player interface and press MENU
button to confirm operation.
OPERATION DETAILS
OPERATION DETAILS
Notice:
III.Picture browse
1.Power on Mp4 player enter stand-by interface. Select
picture interface by pressing
/
and press
MENU button yo confirm and enter picture browse
interface.
2.After entering into "Picture browing",press"MENU",
apper file protection","delect option""interval time"
File protection:write protection and relieve protection
delete option:delete file
iinterval time: set auto browse time ,ticture changeed
time.
3.Select the picture you want to browse through
/
" +/-".click "play"button to browse pictures
pictures for full screen,
OPERATION DETAILS
Repress"Mode" for short to browse pictures
automatically,the autoflip over time is 3 seconds.
Repress"Mode"back to the first picture of auto picture
browsing after browsing all the picture,the screen will
display "slide over";
4.pictures downloaded from web ,if it can`t display,
please use the transforming tools to transform.
5.When display pictures on all of the screen,through
button to magnify pictures, repress
can reduce picture, press
,at this time, sign of
magnifier will on top left corner . Move the pictures
magnified by
6.press ESC to return to superior Menu.
.
7.pictures file put
Mobile disk
:/DCIM/
100MEDIA file.
OPERATION DETAILS
Small knack:
Notice pictures put in (Mobile disk):
/DCIM/100MEDIA/ file.if pictures downloaded
from web can`t be displayed,you can use
transformming tool in CD . laying of picture
will affect displaying of player.the best way is
to acrossing placing.if it is uprighting placing ,
the pictures must be edited by view software.
IV.Record Program
1.Turn on PMP player, enter stand-by interface,Press
/
to select record menu and press MENU
button come to record state.
2.Recording divide into Line-in/mic/Video
record;
3.connect the yellow,red,white video line to the video,
audio outputting port of the telection/DVD/VCD ,
connect another port of the video to AV-IN of the mp4.
If no video signal,it will green csreen,in the singal
input state,press the "play" to start to record,
at this moment ,the icon of "D.V"glittering,press
PLAY to stop recording.
OPERATION DETAILS
4.Under the video recording stand-by state, click MODE
button to select other two record mode: MIC/LINE-IN.Press
+/- button to move option.
5.Press play button to start record after select correct
record mode, and repress play button to stop recording.
6.You should set the time attribution as unlimited in Audio
during record LINE-IN / MIC,otherwise,it will power off
automatically when get to the setting time.
V.accessory
SNAKE
OPERATION DETAILS
RUSSIA DIAMONDS
Russia Diamonds
OPERATION DETAILS
EMC memor y infor mation
10 44 15
NAND FLASH
Used 60%
Select
Confirm
OPERATION DETAILS
Calendar
:
1.
CALENDER TABLE
3.press MENU button or ESC to EXIT .
4.changing of Time and Date is only setted in the time
of Setting.
OPERATION DETAILS
VI Setting operation
The specification can be shown in
the players set function.
Time:Enter time setting interface,
operate by
/
press MENU
button,press +/- to add or
reduce .After finish the modefy ,
press MENU to confirm and exit.
SET
10 44 15
TIME
TV
OUT
SPEAKER
DEFAULT REFERENCE
LANGUAGE
AUTO Power OFF
STORAGE
SELECT
FORMAT
CONFIRM
SETTING INTERFACE
Speaker:
The operation is to control the speaker and the voice of
keystoke screen protection on/off by.selection.press
+/- button to move cursor up and down,press right and
left button to change direction,press MENU button to
confirm.
Language
There are many languages for selection,press +/button to move cursor,press MENU to confirm.
.
STORAGE
there are three storage state.flash memory
(internal memory).SD(external SD card),you can
switch the two ways of storage,but the sequel can not
be plused.the PC-DEVICE is for upgrade port..
OPERATION DETAILS
TV/OUT PUT
the function need out Video cable supporting,connect
PMP to TV,there are twomodels of TV.Once one of the
mode is correctly selected, there must be efective
signal received.then the displaying of TV will become
PMP player`s displaying.each operation of PMP can
shown on the TV.if it without video singal(Do notselect
PAL/NTSC)ENTER tv-out put only by press MODE/
back to last layer,otherwise press"RESET"(reboot)
DEFAULT SETTING
the palyer resume to the factory`sdefault setting. But
the inner data won`t change. The default languange is
English .at the same time,the power on menu also resume
to the default setting.you can refer to the LANGUAGE in
SETTIGN function to change the default setting in
SETTING function.
AUTO
POWER OFF TIME
.
there is no operation when the player is at stand by
.
mode
,you can set auto power off time as never power
off,3 mins off,15 mins,30minute.
FORMAT OPERATION
If there is any mistakes or error occurs,you need to
execute format operation to clean the data and
rearrange the flash memory to resume the player`s
working state.but you need to make a copy of
document before format operation.
Notice: generic film,photo file put in the first file"
(mobile disk):/DCIM/100media",audio file should put in
:/mp3"file,text file put in ":/TXT" file.
OPERATION DETAILS
VII.CAMERA OPERATION
1.Open mp4 player,press" / "to select"camera"
press"MENU" to enter into Camera interface.
2.press"MENU" to take photos after entering into
"CAMERA"interface.exit by "ESC" button.Photos auto
storaged in 100MEDIA File after shootting,browse
photos on the photo option of the mp4.
3.in shooting,press" + /- " to adjust number oflight,the
adjusted number will display on the top right corner of
the screeen(-1.5 to +1.5);
4.digital zoom:press" / "to change focus of the camera
lens.the number will display on theup right corner of the
screen(1.00 to 2.00)
5.In the shootting state,push "HOLD"button to left ,date
will be printed on the down right corner of the shot photo
.the Mp4 player provide many kinds of shooting mode,
such as colour ,nostalgic, black and white, negative .
Press MENU to select and theicon shows below the
screen.
7.press Play to select single,succession timing
(count down for10 seconds)night scene mode for taking
so some photos and ir shows below left screen.
Notice: night model is only for shooting when dusk
or dim light .
OPERATION DETAILS
VIII. D.V.OPERATION:
1. power on the MPM player ,press
/
to select DV menu and press MENU
botton to enter the DV state.
2. press MODE to start shooting, at this
moment , there is time showing below right corner
of the screen. Press MODE again to stop
shooting. Exit by pressing ESC a nd y ou c an
b rowse the film in VIDIO .
3. in shooting, press
/
can chang the
focu s of th e lens , and it shows on right screen.
4. Pr ess
+ / t o a djust th e li ght . The re sult
will d isplay in the screen.
5. the PMP player provite many kinds of shooting
mode colours, monochrome , nostalgic, negative.
Press MENU to select mode and the icon shous
below the screen.
6. before shoot, press PLAY botton to set
NORMAL mode ( no icon) / LIGHT SCENE mode.
NOTICE
OPERATION DETAILS
IX. E-Book operation
1.This PMPsupport txt format e-book.
2.Turn on the PMP,press
/
button to select
Accessoryand press "MENU"button to enter into
Submenu,select reading interface. press"Menu" to
enter into "text reading"interface,move cursor to
select file,press"Play" button to read.
3.At this time,press + /- button to turn on page,
the current page number and the total pages will
displays under the corner of the screen.
The PMP support the function of bookmark,click
the MODE on the unfinished page,it will displays the
bookmark sign under the left corner.(as the picture
shows),when open the e-book again.
5.Press
ESC
to return to the operation interfaction.
OPERATION DETAILS
Notice:
How to make E-book file ? Select the
"start"menu---"program"---"accessory
"---"wordpad" in PC,estibish
"wordpad file",copythe character to the
"wordpad file" ,copy the new estibished
"wordpad file" to "TXT" of theMp4.
Namely,it will be E-book file.
X.REC timing
1. power on the MPM player ,press
/
,select SETUP.And press MENU
botton to enter the SETUP interface. Setup
2. Press
/
to enter the time
interface ,press MODE to enter the
REC timing interface(as displays).
Week Minute
Hour
Time set
Start REC 06
30
00
REC length 02
00
00
3. The start time is the time of start
recording,the latter three group figures Timing kinescope
are indicate about week:clock:minute.
Such as:you want to start recording the
TV programme at 2:30 on Monday
afternoon,that is:01:14:30.
4.Recording time is the length of TV
recording,the latter three group figures
are indicate about hour:minute:second.
Such as:the length of the programme recording time is
2hours 30 minutes and 20seconds,it is:02:30:20.
OPERATION DETAILS
NOTICE:
1.This function only effective under power off state,
it can not be used in power on state.
2.The longgest time of REC timing of this PMP
is 3 hours for this function.
3.We will not be responsible for the losing of recording
because of the wrong setting,lack of power,wrong
connection etc.
XI.PC CAMERA OPERATION
1.before use the PC camera,please install the drivers
at frist.open the "Ca536_Driver" file which is in CD. You
will find the "Install Driver" file,please open it ,double
clink"Setup.Exe" to install.
2.Power on the PMP player, press"+/-"
button to select"Camera",press"MENU"
to enter shooting interface:
OPERATION DETAILS
3. After entering into shooting interface,please contect
the MPM to computer,clink executable file"Amcap"
which is in Sunplus Spca536 then click"PREVIEW" of
the "OPTIONS"(as the screen showing) and now,the
PMP player fill in darkness,but then image will displays
in the computer.
APPENDIX
There is form convertion tools in the random CD of this
machine , can convert the film into . Asf form ; Convert
the music format into. mp3; Convert the picture format
into .JPG ; The step of installation as follows:
1.Click"setup.exe"and execute the
installation procedure operation,
as screen shows:
2.After collected the information,
the screen display the next step
operation clue, then press the next
step to execute operate and press
ESC button to cancel the install
operation.
3.Alter company's name, user's
name in this interface, after finishing
altering, carry out and operate
according to the next step
APPENDIX
4.Be able to put the file into the
corresponding file to choose as
requested in the route , it is
convenient to search;
5.choose program file
6.After selecting the file,press "next step" to copy the
file The following picture will be showed upon finished
copy, at the same time, installation finished.
APPENDIX
Intact introduction route of the film
Convert photo format into JPG
Convert music form into. Mp3 form
Convert the film into. Asf form
route selection
play button
output introduction route of the film
route selection
begin to convert
pause to
convert
About change software
ESC
APPENDIX
TROUBLE SHOOTING
Trouble shooting:
1.Can't power on
Maybe no power, Connect PMP with the charge adapter, and connect
The adapter with the current power, then the PMP will be opened upon
the PMP with power. If disorderly system leads to halted of the PC, then
press the RESET button. If the program damaged, update the program..
2.Auto power off after power on:
Not enough power, auto power off. The auto power off setting
time shortly, then the PMP will be power off with no operation during
some minutes.
3.Have not response when press button:
Lock keyn lock position, Move Lock
button, if the button not work.
the Lock
defective
4.The saving file can not be found:
Storage cards are inserted, the data are stored in the memory,
the storage card has priority to read . So, can not find. Have not stored
in , cut off and transmit when the file has not been finished yet.
5.The USB disk can't be find after connection the system of 98 or
below 98, the installation disk is needed.
The USB cable isn't connect well, it is loose or breakage.
SPECIFICATION & ACCESSORIES
Product specification
Built-in flash
128MB/256MB/512MB Signal to noise ratio
memory
Available 1GB SD card
capacity:
90dB
Power Supply
3.7V Li-lon battery
Earphone output rate
5mW+5mW
LCD
2.5 inch TFT
Audio range
20Hz-20KHz
15.5(D) Recording rate
8KHz-48KHz
Dimension
USB port
86(H)
55(w)
USB 1.1
Accessories
Compress
ratesupport
Mp3 8kbps up to 320kbps
WMA 24kbps up to 128kbps