welding helmet

WORK. LIFE. SAFER.
WELDING HELMET
AUTO DARKENING FILTER
High impact shield and cover lens (certified
to AS/NZS 1337.1:2010)
Auto darking filter CE EN 379:2009 certified
Lightweight and Durable
Multi adjustable head harness with ratchet
comfort pad
Variable auto darkening filter with external
shade 9 to 13 control
Grinding mode for non welding tasks
Internal sensitivity and delay control
Solar and battery combination power
supply
Low battery indicator
RESPIRATORY
HEAD
FACE
EYE
HEARING
RESPIRATORY
HEAD
FACE
EYE
HEARING
RESPIRATORY
HEAD
FACE
EYE
HEARING
WORK. LIFE. SAFER.
WELDING HELMET
AUTO DARKENING FILTER
Head crown adjustment alters the height
of the welding helmet and positions the
headband correctly.
High impact
heat resistant
lightweight shell
Low battery indicator
Dual light sensor
The external control
features a grinding mode.
Variable Auto Darkening
Filter provides shade 9 to
13. Light state is shade 4
Ratchet adjustable
headband with
comfort pad
Replaceable high impact
polycarbonate cover lens
Cover lens retaining latch
provides convenient cover
lens removal when needed.
Harness friction control allows
personal adjustment during the
lift and lowering of the helmet
Auto darkening switching time
less than 1/10,000 of a second
Combination battery
and solar power
Internal auto darkening filter
adjustments feature a delay
and sensitivity control
Welding shell design provides
excellent chin and neck protection.
Head & Face Protection System
The Protector WH02ADF is a lightweight welding helmet providing excellent
coverage and high impact protection. The harness is fitted with a nape comfort
pad and allows multiple adjustments to ensure correct fit and security. The
auto darkening filter is solar/battery powered, fitted with a low battery power
indicator, internal cover lens, sensitivity and delay control. All this permits the
wearer to personalise the product and alter settings to suit the application. The
auto darkening filter is CE approved and fitted into a welding helmet complete
with cover lens and harness AS/NZS 1337.1:2010 certified.
Industries/Application
Suitable for general electric arc welding applications and where high
productivity and quality requirements exist. Industries such as light to heavy
engineering, construction, manufacturing and fabrication are potential users.
Welding processes include MIG, TIG, PLASMA. Please refer to table in product
manual for shade guidance.
Cleaning and Maintenance
Welding Helmets should be inspected for deterioration or damage before each
use. Chipping lens, cover lens and filter lens should be checked prior to use
for cracks, distortion or sever scratching and should be replaced if damaged.
Auto darkening filter should be inspected prior to use to ensure it is operating
correctly. After every use a visual check is recommended and it is stored in
an area or location safe from harm. Helmets with cracks, dents or excessive
scratching should be discarded immediately. For best cleaning results, use
soap and warm water and wipe/pat dry. The use of solvents, harsh detergents
or abrasives is not recommented. Avoid exposure to Solvents, Sulphuric Acid,
Methylene Chloride, Toluene, Paint Thinner and Acetone.
PARTS AND ACCESSORIES
CODE
WH02ADF
DESCRIPTION
Auto Darkening Filter Welding Helmet (Shade 9-13). Grinding mode Shade 4
0211 8276
Auto darkening welding filter
0211 8293
WXHG02
Replacement head harness complete with sweatband
0211 8310
WXSB02
Replacement sweatband
0211 8344
Replacement polycarbonate external cover lens
0211 8327
WH515
WXCL
Distributed Exclusively
in Australia by:
132 832
www.protectoralsafe.com.au
www.ScottSafety.com
(Australia/New Zealand - Protector)
© Scott Safety. All Rights Reserved
Certified to AS/NZS 1337.1:2010