tools limited - Henry Taylor Tools

taylo
Henry
R
tools limited
established 1834
Excellence in Woodcarving,
Woodturning & Woodworking Tools
Henry
Taylor
Tools
Ltd.
The Forge, Peacock Estate, Livesey Street, Sheffield S6 2BL, England.
Tel: (0114) 234 0282 & 234 0321 Fax: (0114) 285 2015.
E-mail: [email protected] Web Site: www.henrytaylortools.co.uk
More than 150 years
of Craftsmanship
In the furnace, after being tanged and bolstered,
prior to drawing out to length.
The blade being drawn out to size and length under
the spring hammer.
Hand forging - a highly skilled process in the
traditional manner.
The blade receiving its final polish and
finish.
Testing the finished blade for hardness.
Traditional Skills Modern Technology
Acorn tools are world renowned and have been made by Henry Taylor since 1834, combining the traditional pride and skills
of those far off days with the aids of modern technology. Only the best quality Sheffield steel is used, coupled with advanced
heat treatment, to ensure that the finest of cutting edges is not only achieved but also maintained.
Many of the lower quality tools produced elsewhere are made under drop stamps or presses but Henry Taylor believe that
only the hand forging method used by the Acorn craftsmen can produce the correctly shaped blade, with the best
metallurgical qualities.
Only Henry Taylor s unique combination of traditional skill, individualised production, Sheffield s best steel, overlaid with
the necessary technology, can produce the wide variety of tools with the precision of form and excellence of cutting edge
demanded by skilled woodcarvers throughout the World.
contents
WOODCARVING TOOLS
Amateur & Professional
2
How to Order
3
Cutting Edge Profiles
4-5
Sculpture Tools
6
Unshouldered
6
Print & Blockcutters
Final blade shaping - willow twigs, a natural
shock absorber, hold the punch.
Wet grinding operations giving an individual
profile to every blade.
Cogelow Skew Gouges
7
Michael Painter Carving Tools
7
Carving Tool Sets
8
Selected Sets
9
Micro Carving Tools
10
Rifflers
10
Woodcarver s Punches
11
Accessories
11
WOODTURNING &
WOODWORKING TOOLS
Meticulous inspection maintains the Henry Taylor
reputation - quality and reliability.
Woodturning and
Woodworking Tools
Diamic brand woodturning tools have been produced in Sheffield by skilled
craftsmen, from the finest steel for more than one hundred and fifty years. The
manufacture of these tools marries traditional hand crafting and forging skills
with modern heat treatment and finishing techniques to give the quality of
design, finish and edge retaining properties demanded by woodturners of today.
Stringent control ensures that the best Sheffield steel is selected. Each tool is
carefully forged, correctly hardened and tempered, then hardness- tested to
guarantee edge retention.
Many tools unique to Henry Taylor have been designed in co-operation with
some of the worlds leading woodturners e.g. Roy Child, Dale & Darrel Nish,
Richard Raffan, Rude Osolnik, Kip Christensen, Bonnie Klein, Ray Key and
Rudolph Dercks.
Introduction
12
Gouges
12-13
Chisels
13
Scrapers
14
Heavy Duty Bowl
14
Turning Scrapers
Beading Tools
14
Parting Tools
15
H.S.S. Woodturning Tools
15-19
Supertip 2000
19
Woodturning Tool Sets
20
Hints on Sharpening
21
Cover Photo
Woodturnings by Ray Key
Woodcarvings by Michael Painter
1
Amateur & Professional
Henry Taylor Tools produce many different shapes and sizes of carving chisels, many of these being made in two
basically differing styles, which is, perhaps, currently the most extensive range available. Professional or Workmen s
tools are longer (blade length 4 3/4" [119mm]) with uniform black non-reflective finish, except on the insides which
have a straw coloured ground surface.
Amateur or Ladies tools by comparison are shorter (blade length 3 1/2" [88mm]) and are bright ground all over and
finished straw colour. The only difference between the two styles are finish and length, otherwise the quality and
shapes are identical. However, the professional range is more extensive. Professional tools are traditionally selected by
the experienced carver, particularly for heavier work and being longer can be repeatedly sharpened. Amateur tools
being shorter are, perhaps, more easily controlled by the less skilled or by the smaller hand and possess all the inherent
qualities of the professional tools. The Henry Taylor identification system uses four digit numbers and the professional
tools commence with 37.., and the amateur 24... Fishtail tools are available only in the professional length, prefix 50...
Straight Tools
These tools are straight along the length of the blade but vary from flat across the
blade up through very shallow sections to deep V shapes.
Chisels
The first tools in the range are 2411 amateur and 3701 professional, which somewhat
resemble an ordinary straight chisel but with rounded bevel on each side of the cutting
edge. The second tools in the range are 2412 amateur and 3702 professional, which
are the same as 2411 and 3701 except that the cutting edge is skewed to facilitate
cutting into very sharp corners. Available in product numbers: Straight 3701 and 2411
Skew 3702 and 2412
Gouges
The first gouges listed are the 2413 and 3703 which exhibit a very shallow curve
across the blade and so on to 2421 and 3711 which have a very deep U section. All of
these tools with a curve or U across the blade are called gouges, they are the most
used carving tools and are suitable for heavy stock removal with the wider tools
having the advantage of not splitting the wood along the grain as would a flat chisel,
or for cutting grooves or C cuts when used vertically. Gouges are available for both
amateur and professional, up to 11/2" wide in the shallower sections and 11/2" wide in
the medium and deeper shapes. Available in product numbers: 3703 to 3711 and 2413
to 2421 inc.
Parting Tools
These are straight tools exactly as the previous category. but are V shaped in section.
Three different angles of V are available in both amateur and professional ranges up
to 3/4" wide in the deepest V , 3/4" in the medium and 1" in the shallowest.
Additionally the winged parting tool - a very shallow V with curved sides in the
professional style only is available. and is used mainly for cutting V grooves,
outlining letterwork etc. Available in product numbers: 3745, 3739, 3741, 2455, 2449,
2451 and 3747
Veiners
Veiners are deep narrow gouges which are used for fine lines, lettering, detail, etc.
Available in product number 3748 up to 11/2".
Bent or Curved Tools
These tools are exactly the same as the straight tools except that they are curved along
the length to facilitate cutting in recesses, inside bowls and curves, etc. All are
available in both professional and amateur ranges of sections and widths except that
the two straight cross section chisels (i.e. square and skew ends) are not made in the
form. Available in product numbers: 3712 to 3720 inclusive and 3746, 3740, 3742.
2422 to 2430 inclusive and 2456, 2450, 2452.
2
How to order
Read the following text and quote:
EXAMPLE:
- Professional Ref 37
1. STYLE
(Amateur or Professional)
- Pau Marfin
2. TYPE OF HANDLE
(Beech or Pau Marfin)
- Straight Gouge
3. DESCRIPTION
- 06
4. CUTTING EDGE SHAPE
- 3/8"
5. SIZE
Check individual tool shapes chart (centre spread) and ensure size
required is available.
Spoon Bit and Spoon Bent Tools
These tools are specifically designed for carving in the awkward spots, generally inside tight curves
i.e. concave surfaces. The general appearance of these tools is rather like a spoon with the tool form
being confined to a short spoon-bowl like curved or bent area on the end of the shank. Both amateur
and professional types are available in the spoonbit form in the full range of sections and widths,
except the shallow V form. Due to the curvature of the bowl end of the tool it is necessary to
offer the skew chisels in both left and right handed forms.
RH: 2432 Amateur 3722 Professional LH: 2433 Amateur 3723 Professional
Also: 3721, 3724 to 3732 inc, 3743 and 3744, 2431, 2434 to 2442 inc, 2452, 2454.
Back Bent Tools
Very similar to the spoon bit type except that the bowl end of the tool is reversed (upside down).
Available for both the amateur and professional in the full range of sizes but only in the shallower
sections. Available in product numbers: 3733 3738 and 2443 to 2448 inclusive
Fishtail Tools
These tools are longitudinally straight and have a straight shank which widens out progressively to
the cutting edge resembling a fish s tail. Made only in the professional form, but the full range of
straight and gouge sections up to 1". V s are not available. The particular benefit of these tools is
that, mainly in the larger sizes, the shank does not interfere when cutting deeper areas in the carving
and visibility is improved. Available in product numbers: 5001 to 5011 inclusive
Long Pod Tools
Similar in principle to the fishtails but the cutting form is taken further back down the shank and they
are available in all sections except the V and only up to 1" wide. The advantages and uses of these
tools essentially is similar to the fishtails and they are only made in the professional style. Available
in product numbers: 3761 to 3771 inclusive.
Allongee Tools
Again somewhat similar to the fishtails and long pod tools except there is no parallel shank at all the cutting form tapering back to the bolster. These tools are very robust and have the advantage of
good visibility around the tool and the ability to cut without damaging the foreground. Available only
in the professional style and in the straight, shallow and medium gouge sections, but up to 2" wide.
These are the tools for heavy work. Available in product numbers: 3791 to 3799 inclusive
3
Cutting Edge
Black outside
Straw colour
inside
A quarter inch
tool is 4 1/4" long
from shoulder
All straight
tools
4
AMATEUR TOOLS
PROFESSIONAL TOOLS
Straw colour all over
Black outside
Straw colour inside
A half inch tool is
3 1/2" long from shoulder
No.s for
straight
tools
No.s for
curved
tools
No.s for
No.s for
spoon bent
back
tools
bent tools
2431
5001
2411
5002
2412
5003
2413
2422
5004
2414
5005
A half inch tool is 4 3/4" long from shoulder
No.s for
straight
tools
No.s for
curved
tools
No.s for
No.s for
spoon bent
back
tools
bent tools
No.s for
long pod
tools
No.s for
allongee
tools
-
3761
3791
-
3762
3792
3724
3733
3763
3793
3725
3734
3764
3794
3726
3735
3765
3795
3727
3736
3766
3796
3716
3728
3737
3767
3797
3708
3717
3729
3738
3768
3798
-
3709
3718
3730
-
3769
3799
2441
-
3710
3719
3731
-
3770
-
2430
2455
-
3711
3720
3732
-
-
-
2455
2456
-
-
3745
3746
-
-
-
-
5039
2449
2450
2453
-
3739
3740
3743
-
-
-
5041
2451
2452
2454
-
3741
3742
3744
-
-
-
-
-
3702
-
2434
2443
3703
3712
2423
2435
2444
3704
2415
2424
2436
2445
3705
5006
2416
2425
2437
2446
3706
5007
2417
2426
2438
2447
3707
5008
2418
2427
2439
2448
5009
2419
2428
2440
5010
2420
2429
5011
2421
5045
R.H.
CORNER
L.H/
CORNER
2432
2433
3713
3714
3715
3721
R.H.
CORNER
3722
3723
Available up to 2" (50mm)
3701
Available up to 2" (50mm)
-
L.H/
CORNER
Available up to 2" (50mm)
FISH TAIL
TOOLS
Profiles
2
3
5
6
10
13
16
20
22
1/16
1/8
3/16
1/4
3/8
1/2
5/8
3/4
7/8
STRAIGHT
CURVED
SPOON BENT
2mm 1/16" 3mm 1/8"
26
1
5mm 3/16"
30
11/16
6mm 1/4"
10mm 3/8"
32
11/4
13mm 1/2"
38 mm
11/2 inch
16mm 5/8"
3747
3748
3749
3750
3751
3752
No. 3780 Side Chisel
3747 Wing Parting Tool
SPECIALISED
TOOLS IN THE
PROFESSIONAL
RANGE
10mm 3/8" only
3748 Veining Tool
3749 Macaroni Tool
3751 Fluteroni Tool
No. 3781 Foot Chisel
Up to 16mm 5/8"
No. 3782 Dog Leg Chisel
Up to 16mm 5/8"
5
Sculpture Tools
These tools were created especially for sculptors who work in large sections of timber. They are beautifully balanced to handle heavy duty
cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Prod.
Ref.
Size
(")
Size
(mm)
Product
Description
Allongee Gouge
3731
11/4"
32mm
Spoon Bit Gouge
50mm
Allongee Gouge
3711
1"
25mm
Straight Gouge
2"
50mm
Allongee Gouge
3719
1"
25mm
Curved Gouge
2"
50mm
Allongee Gouge
3791
11/4"
Allongee Chisel
3739
3/4"
Straight V Parting Tool
Prod.
Ref.
Size
(")
Size
(mm)
Product
Description
3795
2"
50mm
3797
2"
3793
3794
3798
3716
2 1/2"
11/2"
63mm
38mm
Allongee Gouge
Curved Gouge
Shape of
Cutting Edge
Shape of
Cutting Edge
Unshouldered Print & Blockcutters
AVAILABLE IN 31/2" (Series 2000) & 41/2" Lengths (Series 4000)
Up to 8mm wide. Fitted with flat sided palm shaped handle. Used for lino and wood block cutting and delicate woodcarving.
Product Ref.
2001
4001
2002
4002
2003
4003
2004
4004
2005
4005
2006
4006
2007
4007
2008
4008
2009
4009
2010
4010
2011
4011
2013
4013
2014
4014
2015
4015
2016
4016
2017
4017
2018
4018
2019
4019
2020
4020
2039
4039
2040
4040
6
Sweep
01 Straight
02 Skew
03 Straight
04 Straight
05 Straight
06 Straight
07 Straight
08 Straight
09 Straight
10 Straight
11 Straight
03 Curved
04 Curved
05 Curved
06 Curved
07 Curved
08 Curved
09 Curved
10 Curved
39 St. V
39 Bent V
SKEW GOUGES
A new generation of woodcarving tools
Fred Cogelow has gained a considerable reputation in North America over the last decade, having won more best of
show awards in recent years than any other carver. Our first introduction to Fred was at the Davenport Congress in 1982
when his carving Hunts the Crying Bear won the Henry Taylor $5000 best of show award. Since that time we have
maintained friendly and regular contact with him. Combining his years of experience and natural talent for woodcarving
together with his broad knowledge of engineering, Fred has innovated a range of carving tools which offer the decreased
resistance of the skew (the same principal as that of the guillotine) in combination with the
control and contouring capabilities of the gouge. In addition, a variety of new bends and
lengths allow greater accessibility and greatly improved ergonomic performance.
Fred Cogelow with an example of his work.
The tools have been selected for production based on their individual merits and suitability
to a wide variety of carving products and styles.
Available individually and in sets as detailed below.
Set of 7 tools Comprising of: C1, C2, C7, C8, C13, C14, C17
Set of 10 tools Comprising of: C3, C4, C5, C6, C9, C10, C11, C12, C15, C16
Set of 17 tools Comprising of: C1-C17 inclusive
Introductory Set Comprising of: C21, C22, C23, C24, C27, C28, C29, C32, C43
Standard Range
REF. No.
C1 3/8" LH
C2 3/8" RH
Introductory Set
SWEEP
No.4
REF. No.
SWEEP
No.7
C28 5/8" RH
LTH: 6" DES: SHALLOW LIFT
LTH: 5 3/8" DES: GOUGE
No.4
C3 7/8" LH
C4 7/8" RH
No.7
C27 5/8" LH
LTH: 8" DES: SHALLOW LIFT
LTH: 5 3/8" DES: GOUGE
No.9
No.7
C5 1/2" LH
C6 1/2" RH
C22 1/4" RH
LTH: 4 3/8" DES: UPSWEPT
LTH: 5 1/2" DES: EXTENDED SHORT BENT
No.9
No.7
C7 3/8" LH
C8 3/8" RH
C21 1/4" LH
LTH: 4 3/8" DES: UPSWEPT
LTH: 4 1/2" DES: OFFSET FOREBENT
No.9
C9 3/4" LH
C10 5/8" RH
No.3
C24 3/8" RH
LTH: 7 3/4" DES: STANDARD FOREBENT
LTH: 4 3/4" DES: SKEWED SPOON
No.5
C11 7/8" LH
C12 3/4" RH
No.3
C23 3/8" LH
LTH: 4 3/4" DES: SKEWED SPOON
LTH: 7 1/2" DES: BACK BENT
C13 1/2" LH
C14 3/8" RH
C15 3/4" LH
C16 5/8" RH
No.9
No.2
C29 3/16"
LTH: 7 3/4" DES: BACK BENT
LTH: 4 1/2" DES: BENT SKEW
No.39
No.2
C17 1/4"
C43 1/8"
LTH: 1/8" DES: SPOON V
LTH: 4 1/4" DES: BENT SKEW
Chisels are available with STANDARD FINISH - uniform black non-reflective finish
except on the insides which have ground surfaces.
ALL BRIGHT FINISH - bright ground all over. Chisels are supplied sharpened to the
correct recommended cutting edge and require final honing only.
Michael Painter
No.11
C32 1/8"
LTH: 1/8" DES: SPOON GOUGE
- International Renowned Woodcarver
Michael recommends two sets of three and six professional woodcarving tools for the
beginner who needs an introduction to their first choice of Carving Tools. Both of these
combinations will provide a variety of cuts for the small and medium sized projects
together with the knowledge that they have chosen a good foundation for a growing tool
kit.
Set of Three
3748 x 3mm
3704 x 6mm
5007 x 10mm
Set of Six
3748 x 3mm
3748 x 6mm
3711 x 13mm
3704 x 6mm
3730 x 10mm
5007 x 10mm
7
Carving
Tool Sets
Sets of first class high quality tools always
make excellent acceptable gifts, examples are
illustrated below with a selection of packs to
suit most occasions.
The Henry Taylor gift boxed tool sets have
been designed to provide the beginner with a
series which can be built up progressively to
the set of 12 basic tools. There can be benefit
in acquiring these tools in sequence as skill
develops or to suit the pocket or they can be
purchased in the full set of 12 tools.
The tools in the series of make-up sets into
which the 12 basic tools have been broken
down. All the tools are from our amateur
range.
The Craftsmen Set
The complete set is comprised of the 12 tools listed below, with slipstone for
sharpening and booklet containing advice for newcomers to this age-old craft.
2411
2412
2414
2415
2415
2416
1/4"
6mm
10mm
3/16" 5mm
1/8" 3mm
3/8" 10mm
1/4" 6mm
3/8"
Straight chisel
Skew chisel
Straight gouge
Straight gouge
Straight gouge
Straight gouge
2418
2421
2428
2431
2437
2449
1/4"
1/16"
5/16"
1/4"
1/4"
1/4"
6mm
2mm
8mm
6mm
6mm
6mm
Straight gouge
Veining tool
Bent tool
Spoon bit chisel
Spoon bit chisel
Straight V tool
The make-up sets detailed below
permit the Beginner or Starter Sets
to be added to or converted into
complete sets as desired:
Make-up Set No.1
2415
2431
2449
3/8"
Straight gouge
Spoon bit chisel
1/4"
Straight V tool
1/4"
Make-up Set No.2
The Beginner Set
The Starter Set
2412 3/8" 10mm Skew chisel
2414 3/16" 5mm Straight gouge
2428 5/16" 8mm Bent gouge
slipstone and booklet
2412 3/8" 10mm Skew chisel
2414 3/16" 5mm Straight gouge
2415 3/8" 10mm Straight gouge
2428 5/16" 8mm Bent gouge
2431 1/4" 6mm Spoon bit chisel
2449 1/4" 6mm Straight V tool
slipstone and booklet
Supersharp
Carving tools selected for delicate and
detailed wood carving, linoleum &
wood block
cutting.
Polished Wooden
Presentation Cases
For the really special gift, containing 12
pieces with a choice of tools.
Professional/workmen or amateur/ladies
styles available. Also the supreme gift of
all - with 12 bright polished professional
tools.
8
Bent chisel 5/16"(8mm)
Bent shallow gouge 5/16" (8mm)
Bent skew chisel 3/8" (10mm)
Straight chisel 3/8" (10mm)
Straight deep gouge 1/8" (3mm)
Bent V 1/8" (3mm)
2411
2418
2421
1/4"
Straight chisel
Straight gouge
1/16" Veining tool
1/4"
Make-up Set No.3
2415
2416
2437
1/8"
1/4"
1/4"
Straight gouge
Straight gouge
Spoon bit chisel
Selected Sets
Sets of tools consisting of 6, 9, 12 and 18 pieces are available with a
choice of either professional or amateur styles. The tools can be
purchased loose or in canvas rolls.
Professional Tools Series 37
Description
Square
Chisel
Ref. No.
01
Inch size
1/2
Skew
Chisel
02
03
3/8
1/4
Spoon bit Spoon bit
gouge
chisel
Curved
Gouges
Straight Gouges
Parting
Tool
04
05
06
06
07
08
09
10
11
13
15
19
21
27
39
5/16
3/8
1/2
3/4
3/8
1/4
1/8
3/16
1/32
1/4
1/8
1/4
3/16
3/8
1/4
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
Shape of
cutting
edge
Set of 6
Set of 9
Set of 12
Set of 18
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
Amateur Tools Series 24
Description
Square
Chisel
Skew
Chisel
Curved
Gouges
Straight Gouges
Ref. No.
11
11
12
12
14
14
15
Inch size
1/4
3/8
1/4
3/8
3/16
3/8
1/8
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
15
3/8
16
1/4
17
18
21
1/16
1/4
1/16
¥
¥
¥
¥
¥
¥
¥
¥
25
1/8
Spoon bit Spoon bit
chisel
gouge
28
31
37
5/16
1/4
1/4
Parting Tool
49
1/4
50
1/8
Shape of
cutting
edge
Set of 6
Set of 9
Set of 12
Set of 18
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
FREE Peg Board Clips and Header
displaying 18 Acorn Woodcarving Tools are available to all stockists.
(overall dimensions 35" high x 17" wide x 5" deep)
Displays 3 of each of the following
WOODCARVING TOOLS
3701 1/2"
3704 5/16"
3706 3/4"
3
3
3702 /8"
3705 /8"
3707 3/8"
1
3703 /4"
3706 1/2"
3708 1/4"
3709 1/8"
3710 3/16"
3711 1/32"
3713 1/4"
3715 1/8"
3719 1/4"
3721 3/16"
3727 3/8"
3739 1/4"
BEECH MALLETS, SLIPSTONES,
1 large and 1 small and full sharpening instructions, carded.
9
Micro Carving Tools Designed by Jeremy Williams
Easy grip handle with unique finger recess for better control.
Unique curved blades ensures optimum point of contact between cutting bevels and surface of wood. Essential
requirement when texture cutting.
Exceptional accuracy of cutting afforded by the unique design of these Micro Tools makes them ideal choice for fine
finishing work or when texture is to be applied.
Grounding tool - an essential item for all relief carving.
Specially designed Lozenge smoothing tool used with an orbital slicing action to smooth areas of difficult grain, or
wood that has been distressed by rasps, rifflers, cutter burrs or course abrasives.
Wide range of sweeps and sizes (based on many years carving experience by Jeremy Williams).
Each tool comes factory
sharpened.
Set of 12 unique
Acorn Brand
3mm
2mm
3mm
5mm
2.5mm
2mm
3mm
2mm
4mm
1.5mm
1.5mm
5mm
No.1 Straight Chisel
No.2 Skew Chisel
No.4 Shallow Gouge
No.4 Grounding Tool
No.5 Shallow Gouge
No.6 Medium Gouge
No.7 Medium Gouge
No.8 Deep Gouge
No.9 Deep Gouge
No.11 Veiner
No.39 V Tool
Lozenge Smoothing Tool
Can be supplied in any sweeps up
to 1/4" (6mm wide)
All blades 80mm long
Overall Length: 182mm
Rifflers
These much sought after items are available in various cross sections to facilitate
cleaning up in awkward spots. All approximately 8" long, double ended and bastard cut
for sculptors and marble workers. They are available singly or as a set of 8 in a plastic
wallet (ref. PWB18). Single product
numbers B1 to B8 inclusive.
10
B1
B5
B2
B6
B3
B7
B4
B8
Woodcarver's Punches
Where a textured surface or background treatment
is required, the only real answer is found in our
range of woodcarvers punches.
The punch number must be prefixed by
the product number. 6050, followed
by the required punch number.
1
2
3
22
23
24
4
5
6
25 26
7
8
27
9
l0
28 29 30
11 12
13 14
15 16
31
33 34
35 36
32
17 18
37 38
19
39
20
21
40 41
Accessories
Adzes
These tools have been developed following extensive research and study into
the many traditional styles and museum pieces available. They are intended
for single handed use and remove wood at a fantastic rate - ideal for roughing
out, particularly on large carvings. The two patterns are identical except that
one has a blade with a straight cutting edge whereas the other is a gouge adze
which is curved across the blade. In each case: Handle (shaft) length: 10 1/2" (25cms)
blade length: 7" (17.5cms) width of blade: 2" (5cms) weight: 2lbs (0.91kg)
Mallets
Traditionally wood carving mallets are always of wood and with a round head,
giving the excellence of balance required for continuous use without undue
fatigue and offering a large working surface to reduce wear.
Only wooden mallets should be used with carving tools.
Mallets have ash handles and a 3 1/2" Beech head.
Chip Knives
Essential equipment for whittling but also indispensable for
all carving whether for stop cutting or fine detail. These fine quality
Knives are also ideal for cutting mounts for photos or artwork.
Product numbers: 6019 curved blade, 6014 straight blade.
Slipstones
For sharpening, available in two sizes:
Large - 4 1/2" x 1 3/4" x 1/2" x 3/16"
Small - 2 1/4" x 7/8" x 3/16" x 1/16"
Beech and Pau Marfin Handles
Suitable for both amateur and professional ranges.
Please specify type of handle. i.e. Beech or Pau Marfin.
Handle ref:
Tool sizes:
1/32"
127
- 3/8"
1/2"
Handle ref:
Tool sizes:
7/8"
129
- 3/4"
131
- 1 1/4"
133
over 1 1/4"
11
AN INTRODUCTION TO
Woodturning and Woodworking Tools
Cutting abrasive woods at high speed concentrates a lot of wear at one small spot on the tool’s cutting
edge and the edge can get very hot. In these conditions carbon steel tools
soften and dull very quickly and require repeated grinding to maintain a sharp edge.
High speed steels which are more expensive have been developed over many years for
cutting tools that must resist abrasion and the high edge temperatures caused by
friction. A sharpened edge on a high speed steel turning tool will last many times
Carbon
longer than its equivalent in carbon steel, thus far less time is wasted in
Steel
regrinding and the life of the tool is prolonged. Also the heat resistant nature
of high speed steel reduces the danger of accidentally drawing the temper
of the steel during grinding.
HSS Steel
The colour of the handle readily identifies our
turning tools.
Turning Tool Handles
Carefully designed and finished in
English hardwood Turning tools can be supplied with
or without handles.
Prefix T- Carbon Steel
Prefix HS-High Speed Steel
The Craftsman Woodturner
a complete
guide to using all
woodturning tools. Obtained from bookshops or from Peter Child.
The Old Hyde, Little Yeldham,
Halstead, Essex CO9 4QT.
Gouges
Superflute High Speed Steel Gouges (deep fluted).
The original Superflute HS.1. designed in 1978 by Roy Child is perhaps the most famous
woodturning tool of all time, has sold in thousands all over the world and remains the ultimate gouge used by most leading turners. Now made in a range of sizes the 1/2" or 3/8"
gouge recommended for general purpose work and the 1/4" gouge for small bowls on very
delicate cuts.
Size
Prod. Ref.
Handle
12
1/4"
HS84
H187/11
3/8"
HS85
H187/15
5/8"
HS1
H178
3/4"
HS80
H189
1"
HS136
H189
Chisels - High Speed Steel
Plain Skews
Square End Chisels
1/4"
Size
Prod. Ref.
Handle
1/2"
MT4 HS8
H186 H187
3/4"
HS21
H187
1"
1 1/4"
HS22 HS9
H187 H188
Size
Prod. Ref.
Handle
1/2"
HS23
H187
3/4"
HS24
H187
1"
HS25
H187
1 1/4"
HS10
H188
Oval Skews
1/2"
HS60
H187
Size
Prod. Ref.
Handle
3/4"
HS61
H187
1"
HS62
H187
1 1/4"
HS63
H188
Chisels are used for convex, conical and cylindrical features in spindle turning, they are also used for cleaning up end grain and vee cuts. Oval section skews
are easier to use and offer enhanced sensitivity and precise handling, they are more stable on the rest and less prone to dig-ins . Standard skews are stronger
and heavier and less prone to vibration. Square end chisels are the traditional choice for planning cuts on cylinders and tapered forms. Used correctly they give
a wonderful finish even on difficult wood. Planning cuts can also be done with a skew chisel.
Chisels - Carbon Steel
Long & Strong
Plain Skews - Standard
Size
Prod. Ref.
Handle
1/4"
1/2"
3/4"
T1
H172
T2
H172
T3
H173
1 1/4"
T5
H174
1"
T4
H173
Size
Prod. Ref.
Handle
1/2"
3/4"
T21 T22
H173 H173
1" 1 1/4"
T23 T24
H173 H174
1 1/2" 2"
T63 T25
H177 H177
Long & Strong
Square End Chisels - Standard
Size
Prod. Ref.
Handle
1/4"
T20
H172
1/4"
1/2"
3/4"
T6
H172
T7
H172
T8
H173
Size
Prod. Ref.
Handle
1 1/4"
T10
H174
1"
T9
H173
1/4"
T64
H172
1/2"
T26
H173
3/4"
1"
1 1/4"
T27 T28 T29
H173 H173 H174
1 1/2" 2"
T30 T31
H177 H177
Traditional Bowl Gouges
Not as versatile as the Superflutes but still very popular with the traditionalists.
Carbon Steel Forged
Long & Strong
HSS Round Bar
Size
Prod. Ref.
Handle
1/4"
HS39
H187/11
3/8"
HS40
H187/15
1/2"
HS55
H188
1/4"
T43
H172
3/8"
T44
H172
Carbon Steel Round
Bar Long & Strong
1/2"
T45
H173
3/4"
T46
H174
1/4"
T53
H172
3/8"
T54
H173
Roughing Out Gouges - Forged
These large forged gouges are used between centres to take the corners off and shape shallow curves. Easy to
use, safe, efficient and fast. Used with a slicing cut, they can give an excellent finish akin to that produced by
the skew.
High Speed Steel
Size
Prod. Ref.
Handle
3/4"
HS3
H187
1"
HS112
H188
Carbon Steel Extra
Heavy Long & Strong
Carbon Steel Standard
1 1/2"
HS4
H188
3/4"
T37
H173
1 1/2"
T38
H177
1 1/2"
T47
H177
Spindle Gouges forged to the traditional shape
High Speed Steel
Size
Prod. Ref.
Handle
Carbon Steel
Long & Strong
Carbon Steel Standard
5/16"
1/2"
3/4"
1" 1 1/4"
HS53 HS54 HS41 HS57 HS42
H187 H187 H187 H187 H188
1/4"
3/8"
1/2"
3/4"
1"
T32 T33 T34 T35 T36
H172 H172 H172 H173 H174
3/8"
1/2"
3/4"
1"
T39 T40
T41 T42
H172 H172 H173 H174
Spindle Gouges machined from bar
Spindle gouges are used for detailed shaping between centres particularly for concave curves. In skilled
hands they are effective at hollowing of goblets.
High Speed Steel
Size
Prod. Ref.
Handle
1/8"
MT1
H186
4mm
DM1
H186
1/4"
HS5
H186
Carbon Steel Standard
3/8"
HS6
H187/11
1/2"
HS7
H187/15
1/4"
T50
H172
3/8"
T51
H173
1/2"
T52
H173
13
Scrapers
Square End Scrapers
For finishing flat surfaces e.g. wine table top or convex surfaces and the outside of bowls. Also for hollowing and
finishing flat bottom holes in chuck work e.g. turned containers.
High Speed Steel
1/4"
HS37
H186
Size
Prod. Ref.
Handle
1/2"
HS28
H187
3/4"
HS29
H187
Carbon Steel Standard
1 1/4"
HS31
H188
1"
HS30
H187
1/4"
T62
H172
1/2"
T11
H172
3/4"
T12
H173
1"
T13
H173
11/4"
T14
H174
Round Nose Scrapers
Used to hollow and finish concave surfaces such as inside bowls and goblets.
High Speed Steel
1/2"
HS26
H187
Size
Prod. Ref.
Handle
3/4"
HS38
H187
Carbon Steel Standard
1 1/4"
HS34
H188
1"
HS27
H187
1/2"
T17
H172
3/4"
T18
H173
1"
T19
H173
1 1/4"
T59
H174
Diamond Side Cutting Scrapers
Used to hollow and finish the side and the bottom holes,
such as the inside of a turned container.
High Speed Steel
Size 3/4"
Prod. Ref. HS36
Handle H187
Carbon Steel Std.
Size 3/4"
Prod. Ref. T61
Handle H173
Round Side Cutting Scrapers
For finishing egg cups, goblets and the inside of bowls.
High Speed Steel
Carbon Steel Std.
Size 3/4"
Size
3/4"
Prod. Ref. HS35
Handle H187
Prod. Ref. T60
Handle H173
Diamond Point Scrapers
Used for incised line decoration.
High Speed Steel
Size 1/2" 3/4" 1"
Prod. Ref. HS43 HS44 HS45
Handle H187 H187 H187
Carbon Steel Std.
Size 1/2" 3/4" 1"
Prod. Ref. T15 T16 T55
Handle H172 H173 H173
Continental Range of Side Cutting Scrapers
A range of high speed steel side cutting scrapers designed by Rudolph Dercks for the continental market.
Round Side
Size 3/4" 3/4" 1" 1"
Prod. Ref. HS46 HS47 HS48 HS49
Handle H187 H187 H187 H187
Diamond Side
Size 3/4"
Prod. Ref. HS52
Handle H187
Heavy Duty Bowl Turning Scrapers - by Peter Child
Exceptional mass and rigidity damps
out vibration leaving a clean finish.
Safe to use even with a large overhang
over the tool rest. Suitable for deep
hollowing operations such as larger vases
and cylindrical containers.
High Speed Steel
Handle H188
Section 1 1/2" x 3/8"
Blade Length 8 1/2"
Overall Length 20"
Carbon Steel Standard
Handle H177
Beading Tools
For forming beads, rounding off or cleaning up the ends of cylinders, forming short straight sections, cutting straight
bottom notches, turning spigots and for vee cuts.
High Speed Steel
Size
Prod. Ref.
Handle
14
1/4"
HS11
H186
3/8"
HS12
H187
Carbon Steel Standard
1/4"
T57
H172
3/8"
T49
H172
Parting Tools
Parting tools are for cutting deep grooves and for separating finished work from the waste.
NB. Fluted parting tools should be used flute down on the rest. Sharpen by grinding the bevel only and maintaining the 45… bevel angle.
Standard Parting Tools
Diamond Parting Tools
High Speed Steel
3/4"
x 1/8"
HS13
H187
Section
Prod. Ref.
Handle
x 1/8"
HS32
H186
1/2"
Carbon Steel Standard
Section
Prod. Ref.
Handle
High Speed Steel
1/2"
x 1/4"
T48
H172
Section
Prod. Ref.
Handle
Carbon Steel
Standard
3/4"
x 1/8"
HS33
H187
3/4"
x 1/8"
T58
H173
1/2"
x 1/8"
T56
H172
Fluted Parting Tools
High Speed Steel
Section
Prod. Ref.
Handle
3/4"
x 1/8"
HS2
H187
H.S.S. Woodturning Tools
Round Bar Skew Chisels
Round Edge Skew Chisels
Developed specially to allow the blade the
blade to move more freely along the tool rest.
Blade length 11 1/2".
The rounded smooth edges allow the skew to
slide smoothly along the rest. It has greater
mass and stability than oval skews. Useable
blade length 6".
3/8"
HS129
HS130
HS131
1/2
"
5/8"
HS147
HS148
HS149
1/2"
3/4"
1"
Modified Grind Bowl Gouge
Detail Gouge
The corners are ground much further back
than on a standard bowl gouge, with the
cutting edge nearly blending in with the flute.
The increased length of the cutting edge
makes a tool that can take a very large cut and
requires considerable motor power, as well as
skill and experience on the part of the turner.
Not recommended for beginners.
Blade length 10" .
Designed for detail work primarily on spindle
work, the shallow flute and heavy cross section
make it stable and easy to control. Ground with
a "fingernail" grind. Useable blade length 7".
HS137
5/8"
Bar 1/2" Gouge
S. Mortimer Helical Tool
HS138
1/2"
Shallow Gouge
For roughing down stock or turning large
spindles. Designed by Rude Osolnik. Useable
blade length 9".
A 3/4" twisting gouge. Is used to cut
the trough or hollow when roughing
out the twists on spiral work after the initial
saw cuts have been made. The gouge is
designed especially for this
type of work.
Ellsworth Gouge
It is about 4" long, not including the
tang with a long hollow ground bevel
and finger nail shape sharpened fully around
the leading edge to the heel of
the tool. It should be fitted with a
standard chisel handle.
This tool was developed in conjunction with
David Ellsworth well known U.S. woodturner.
It is made from 16mm
round bar with a 7 1/2" flute. The special
feature of this gouge is a side grind
which enables roughing, and fine cuts
can be achieved on bowls.
HS135
HS152
HS165
1 3/4"
1/2"
15
Round Edge Shear Scraper
Radius Edge Shear Scraper
The round edges allow smooth
tool travel along the tool rest as
well as ease in positioning the
tool at the desired shearing
angle. Excellent for improving
gouge surfaces and removing
small ridges or tom grain.
Useable blade length 6".
The radius point provides versatility as
the shearing cut can be made either way
depending on grain direction. The round
edge allows smooth travel along the tool
rest while the tool is tipped on edge.
Tipped 30-45 degrees the shear scraping
cut will improve the
surface prior to sanding.
Useable blade length 6 1/2".
HS150
HS151
1" LH
1" RH
3/4"
1 1/2"
HS145
HS146
Dovetail Scraper
Thin Parting Tools
This tool is specially designed for
making accurate recesses to
accommodate the jaws of an expanding
dovetail chuck.
The l/16" parting tool is the thinnest
standard parting tool currently available,
producing minimal
waste when used.
1/2"
HS163
1/2"
x 1/16"
1" x 1/16"
1 1/2" x 1/16"
2" x 1/16"
HS167
HS168
HS169
HS170
Beading Tools
These tools will produce beads quickly and consistently and are wonderful for small detail in dense, close grained
woods, plastics, bone, etc. They are sharpened by grinding or honing the bevelled edge, and can be used until the
flute is gone. Unhandled. Useable blade length 5"
HS140
HS141
HS142
Square Stock for l/16" Bead
Square Stock for l/8" Bead
5/16" x 1/2" Stock for 3/16" Bead
5/16"
HS143
HS144
5/16"
3/8"
x 1/2" Stock for 1/4" Bead
x 1/2" Stock for 5/16" Bead
Coving Tool
Captive Ring Tools
This tool makes it possible to cut coves
with speed and consistency. The
shearing cut produces a smooth surface
and the flat bevel is easy to sharpen. Can
make many sizes of coves. Useable
blade length 7"
Specifically made for producing rings.
HS139
HS132
3/8" x 1/4" x 6"
Long Blade for 1/4" Beads
HS133
1/2" x 1/4" x 6"
Long Blade for 1/4" Beads
HS134
5/8" x 1/4" x 6"
Long Blade for 1/2" Beads
3/8"
Pyramid Tool
Allan Batty Arm Rest
This unique multi purpose tool is ideal
for beginners and experienced
woodturners alike. When used as a skew
the problems of digging are greatly
reduced. Suitable for both spindle and
face plate. Able to cut beads and
shoulders.
This tool was developed in conjunction
with Allan Batty well known
international woodturner. This additional
tool rest is to aid working at the face,
boring, hollow turning and inside screw
cutters with chaser. Blade length 8 1/2"
HS166
16
5/16"
HS 164
Mini Turning Tools
Chris Stott set of Micro Hollowing Tools
Designed for miniature turning such as goblets, tops, tagua nuts and jewellery.
Mini Sq. End Scraper
Mini Skew Chisel
Mini Oval Skew Chisel
Mini Sq. End Scraper
Mini Parting Tool
3/16"x 3/32"
1/4" x 1/8"
HS113
HS114
HS115
HS116
HS117
HS120
HS121
HS122
HS123
HS124
Mini Rd. Nose Scraper
Mini Side Scraper
5/32" Mini Gouge
13/64" Mini Gouge
3/16"x 3/32"
1/4" x 1/8"
HS118
HS119
HS127
HS128
HS125
HS126
This set, personally designed by Chris Stott is ideal for
small hollow forms up to 3 or 4 inches in depth or diameter.
The straight nose scraper will remove most of the interior
and the two bent scrapers will work the curved areas of the
work, including tight areas around the neck of the opening.
Fingernail Profile Gouges
Most woodturners have difficulty in achieving a fingernail
profile. Henry Taylor Tools have been providing fingernail
gouge to the overseas market for
a number of years and have now introduced a selection
of gouges with a factory ground fingernail profile to
the U.K. market.
We have adopted a medium grind as this is not only safe in
use, but also allows the turner to modify the profile to his
specific requirements.
Wing tips ground back so they cannot catch on the work.
Pulling and pushing cuts can be taken Delicate shearing cuts
and full profiling cuts are easier with this profile.
Long Handled Turning Tools
This large range of turning tools permits extra reach into vessels and are fitted with a 24" handle.
Ref.
Description
Size
HS153
HS154
HS155
HS156
HS157
Roughing Gouge 10 1/2" Blade
Roughing Gouge 7" Blade
Superflute
Superflute 2" longer flute 13" Blade
Shallow Gouge
3/4"
11/2"
1"
5/8"
13/4"
Overall Handle
Length Length
Ref.
Description
341/2"
311/2"
341/2"
36"
331/2"
HS158
HS159
HS160
HS161
Raffan Curved Scraper 10" Blade
Skew Chisel 10" Blade
Rd. Nose Scraper 10" Blade
Hollowing Tool Rd. Bar 12" Blade
24"
24"
24"
24"
24"
Size
13/8" x 3/8"
11/2" x 3/8"
11/4" x 3/8"
3/8"
Overall Handle
Length Length
34"
341/2"
34"
351/2"
24"
24"
24"
24"
17
H.S.S. Woodturning Tools
- Developed with the co-operation of international experts.
1. Designed by Richard Raffan.
Richard began woodturning in 1970 and can be described as one of the world s foremost authorities on
this craft. Drawing on his vast experience Richard has designed a range of tools which are produced from heavy
section materials, with particular attention given to the curved cutting edge shapes. The tools are safe to use because
the thick material does not flex thus reducing the chance of catches. The curved cutting edges are less prone to catches
and much enhance the versatility and controlled performance of the tools.
Raffan books and videos describing and demonstrating his techniques and tool section are available world wide.
Bowl Scrapers
Size
Ref.
Handle
3
/8" x 1/4"
HS64
H187
3
/4" x 5/16"
HS65
H187/11
Curved Skews
1 3/8 x 3/8"
HS66
H188
1 1/4" x 3/8"
HS67
H188
1" x 3/8"
HS83
H187
1
Side Scraper
/2" x 3/16"
HS68
H187
3
/4" x 1/4"
HS69
H187
1" x 5/16"
HS82
H187
3
/4" x 3/8"
HS81
H187
2. Designed by Rude Osolnik.
Mr. Woodturner in America", Rude Osolnik has been involved in all aspects of woodturning for nearly 50 years. As
a result of his teaching workshops around the U.S.A., there is an increasing demand for the innovative tools which
Rude designed and made for his own use.
Ref.
Description
HS70
HS71
HS72
No.2 Flat Gouge
No.3 Flat Gouge
No.4 Flat Gouge
Handle
Size
Ref.
Description
H187
H187
H187
1/2"
HS73
HS74
HS75
No.5 Chisel
No.6 Round Nose
No.7 Round Nose
5/8"
3/4"
Handle
Size
5/8"
H187
H187
H187
1/2"
5/8"
3a. Parting Tool developed by Kip Christensen.
This narrow parting tool is ideal for working with the hard dense woods used in boxes and tops. It produces a
shearing cut and a flat smooth surface.
3b. Beading Tools re-introduced by Dale Nish.
These traditional tools overcome the problems of forming precise and consistent beads on small boxes, bases etc.
The top of the tool only should be honed to preserve the shape.
Beading Tools
Size
Prod. Ref.
Handle
1/4"
x 1/4"
HS77
H186
Parting Tool
5/16"
x 5/16"
HS78
H187
3/8"
x 3/8"
HS79
H188
1/2"
x 1/8"
HS76
H186
4. Euro - Set.
A set of high speed steel turning tools designed by Rudolph Dercks to meet the special requirements of woodturners
in Europe.
4.
5.
Ref.
Description
HS86
HS87
HS88
HS89
Euro Turning Gouge Forged Bar
Euro Turning Gouge Forged Bar
Euro Turning Gouge Forged Bar
Euro Roughing Out Gouge
Size
Ref.
Description
3/8"
HS90
HS91
HS92
HS93
1/2"
3/4"
1"
Size
Euro Roughing Out Gouge
Euro Chisel Skew End
Euro Parting Tool
Euro Round Sided Cutting Scrape
1 1/4"
3/4"
1/2" x 1/8"
3/4"
5. H.S.S. Turning Tools by Ray Key. - 3/8" & 1/2" H.S.S. Modified Spindle Gouges.
Used mainly for making boxes, from hard dense end grain material. Internal hollowing from the centre is made easy
with the short stubby 60/65ß angle, this allows for a strong vibration free pivot cutting action, as the bevel can be
rubbed for much of the time. For outside shaping the long side grind is used with the bevel rubbing, the tool is pulled
along the material. Quality of surface obtained is the equivalent of a skew chisel, but is much better than a skew on
difficult woods. This tool is also used for refined shaping of the outside of small bowls. Used correctly the bevel
rubs with a slicing cut action and leaves a very clean tool finish, no scraping is required. End grain hollowing on
softer woods and larger work is best done with the 1/2" gouge. The end/side cutting scraper is made from a 3/4"
square end scraper. This is used to true up gouge ripples in the base of flat bottomed boxes and to true up the side
walls. The 1/2" skew is one that has a much longer angle than normal, it is used more like a sheer scraper on end
grain and for cutting the dovetail undercut on bowls and platters required by many of today’s chucks. The 3/4" round
side scraper is used for the truing up of gouge ripples in the base of soft curved boxes, goblets, egg cups etc. The
modified straight across the grind make it much easier to remove the nipple or pimple often found in such items
when the rounded end ones are used.
Ref.
HS102
HS103
HS104
Description
R. Key Skew Chisel
R. Key Round Side Cutting Scraper
R. Key Square End/Side Cutting Scraper
Size
1/2"
3/4"
3/4"
Ref.
HS105
HS106
Description
R.Key Spindle Gouge
R. Key Spindle Gouge
Size
3/8"
1/2"
6.
6. Miniature Set by Bonnie Klein.
This miniature set of eight tools was designed by Bonnie Klein of U.S.A. for miniature turning such as goblets, tops,
tagua nuts and jewellery.
Ref.
HS94
HS95
HS96
HS97
18
Description
Gouge
Gouge
Gouge
Gouge
Size
5/32"
13/64"
1/4"
5/16"
Ref.
HS98
HS99
HS100
HS101
Description
Parting Tool
Skew Chisel
Radius Scraper
Square End Scraper
Size
3/32"
3/8"
3/8"
3/8"
H.S.S. Woodturning Tools
The following tools have been developed in cooperation with international expert Ray Key.
A. Key Parting Tool HSS. Section 1/2" x 3/32"
Used with the widest width of the tool down on the rest, the tapered section gives tool clearance and stops binding. HS 107
B&C. Key French Curve Scrapers HSS. Section 11/2" x 3/8" for larger work 1" x 1/4" for smaller work
The shape of the tool makes it easy to remove any ripples and undulations from the bowl gouge. Blending of curves is easy and outward side
pressure on the walls of bowls is virtually eliminated when the tool is used correctly. (Side pressure can cause wood
to flex and give a catch or dig in and shatter.) HS 108 & HS 109
D. Key Round Cutaway Scraper
HSS. Section 3/4" x 1/4"
For inside work with small openings the
cut away section allows easier
manipulation under any shoulder and
minimises the chance of fouling the tool
on the far side of the opening. HS 110
E. Key Shear Scraper HSS.
Section 11/2" x 5/16"
The stubby heavy section and rounded
edges makes for easy use and damps
down vibration. Used at an angle of 30¡
to 45¡ out of the horizontal, gives a fine
finish on difficult timbers when used in
this way, for bowls and flat work.
HS 111
Supertip 000
The ultimate bowl turning &
hollowing tool
A
C
B
D
E
MANY TIPS AVAILABLE - all are made from 16mm round bar M2 HSS
Straight Gouge - Superflute profile
Performs exactly as the original
Superflute for general and heavy
duty bowl turning.
Straight Gouge - U shape flute profile
With a larger radius at the bottom of the
flute. Preferred by many turners for
grinding back to special pointed shapes.
Pointed nose style also available.
Angled Gouge - Superflute profile
This tip produces a much superior
finish inside a bowl - even a deep
bowl. Easier to get a smooth
flowing interior curve without
steps in the shape. The handle can be used
horizontal so a pivoting head lathe is not
needed for good results.
✦ Tips just screw in. No grub screws to clog. No
special tools needed.
✦ Tips can be freely interchanged or replaced when worn.
✦ Tool stays virtually its full length in use. Shank is stronger
and more rigid than a conventional gouge. Shank cannot
snap. Extra long shanks available.
✦ Tip is flush with the shank - nothing to catch on the
tool rest.
Loop Hollowing Tool
This works like a ring tool but has superior
clearance for shavings and - because it has a
smaller working radius is much easier to
control. Gives an excellent finish and can
hollow into deep and awkward places where a
ring tool could not reach. Also good for deep
straight sided hollows. It has two cutting edges
with different bevel angles.
✦ Tips are easy to sharpen on conventional equipment
and keep an extra keen edge.
✦ Tool is just as easy to use and gives a superior finish.
* Starter kit consists of 300mm long x 16mm round bar holder fitted with a 300mm
long handle with two tips of your choice.
19
Woodturning Tool Sets
Full size professional quality turning tools.
Packed in sturdy racked cardboard presentation boxes. Available in carbon and high speed steel in sets of 3,
5 and 8. Carbon steel tools are readily identified with the hardwood yellow tone handles, high speed steel
with dark stained beech handles.
Carbon Steel Standard
Ref. No.
T2
T4
T15
T17
T32
T34
T35
T48
Set Selections
Description
Skew Chisel 1/2"
Skew Chisel 1"
Diamond Point 1/2"
Round Nose 1/2"
Gouge 1/4"
Gouge 1/2"
Gouge 3/4"
Parting Tool 1/4"
TT3
¥
TT5
¥
¥
¥
¥
¥
¥
¥
Medium size turning tools.
For craftsmen using a small lathe or drill
powered lathe attachment. Designed with
shorter handles for detailed and delicate
woodturning. Overall length approximately
10".
TT8
¥
¥
¥
¥
¥
¥
¥
¥
High Speed Steel
H.S No.
3
5
6
7
8
21
27
29
32
33
38
39
61
5/16"
1/4"
3/16"
1/8"
3
5
¥
8
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
High Speed Steel
HSMT Set of Five (Walleted)
Carbon Steel Standard
Super Five Set (Walleted)
3/16"
Set Selections
Description
Roughing Gouge 3/4"
Spindle Gouge 1/4"
Spindle Gouge 3/8"
Spindle Gouge 1/2"
Skew Chisel 1/2"
Skew Chisel 3/4"
Round Nose Scraper 1"
Square End Scraper 3/4"
Small Parting Tool 1/2" x 1/8"
Diamond Parting Tool 3/4" x 1/8"
Round Nose Scraper 3/4"
L & S Deep Fluting Gouge 1/4"
Oval Skew Chisel 3/4"
1/8"
Square End Chisel
Skew Chisel
Gouge
Round Nose Scraper
Parting Tool
1/4"
1/4"
1/4"
1/4"
x 1/8"
Gouge
Gouge
Round Nose Scraper
Skew Chisel
Parting Tool
High Speed Steel
HSDM Set of Five (Loose)
4 mm
6 mm
9 mm
13 mm
13 mm
Gouge
Gouge
Gouge
Skew Chisel
Parting Tool
Free Peg Board Clips
and Header
Merchandiser units are available for
carbon and high speed tools. The
merchandiser is 24" high x 18" deep
and carries three off each of eight
individual tools all walleted.
Carbon Steel Standard Merchandiser
Ref
T2
T5
T13
T32
T34
T37
T44
T48
20
Description
Skew Chisel
Skew Chisel
Square End Scraper
Gouge
Gouge
Roughing Gouge
L & S Deep Fluting Gouge
Parting Tool
High Speed Steel Merchandiser
Size
1/2"
1 1/4"
1"
1/4"
1/2"
3/4"
3/8"
1/4"
Ref
HS3
HS5
HS7
HS8
HS9
HS13
HS30
HS40
Description
Deep Fluting Gouge
Gouge
Gouge
Skew Chisel
Skew Chisel
Parting Tool
Square End Scraper
L & S Deep Flute Gouge
Size
3/4"
1/4"
1/2"
1/2"
1 1/4"
3/4" x 1/8"
1"
3/8"
Hints on Sharpening - H.S.S. Turning Tools
Grind in the ordinary way on a standard grindstone or if a new wheel is to be purchased choose a soft white aluminium oxide wheel 60 to 80 grit
size, medium to soft grade K. The grindstone as with all tool grinding must be kept clean and dressed if glazed. H.S.S. unlike carbon steel will not
soften if coloured by the heat of grinding but the temper colours must definitely be avoided if maximum performance from the cutting edge is
desired. This is because there is a risk of minute cracks developing at the edge which weakens it. This again can damage the steel. Do not remove
more metal than is absolutely necessary to leave a sharp edge. Do not round off the bevel. Find the correct angle and stick to it. Honing is beneficial
for most of the tools especially when turning softwood. However, most turners only hone the chisels and use the other tools straight from the
grindstone.
Bevel angles, measured from the axis of the tool, recommended for general use :Superflute bowl gouge - 40 degrees.
Chisels - 15 degrees, 30 degree included angle.
Spindle gouges
- 35 degrees, less for softwood. Scrapers - 60 to 70 degrees.
Woodworking Chisels
- From the finest Sheffield Steel fitted with hardwood handles
Cranked Paring Gouges.
Long narrow blades with cranked neck, allowing the chisel blade to be used flat on work surface. Cutting edge
ground on inside giving an outside cut. Blade about 8" long.
F1 1/4" x 1/4" F2 1/2" x 5/8" F3 3/4" x 7/8" F4 1" x 1 1/4" F5 1 1/2" x 1 3/4"
Incannel Paring Gouges.
Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade about 8" long.
F6 1/4" x 1/4" F7 1/2" x 5/8" F8 3/4" x 7/8" F9 1" x 1 1/4" F10 1 1/4" x 6"
Incannel and Outcannel Firmer Gouges.
Standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground inside giving an outside
cutting edge. Outcannel gouges are ground outside giving an inside cutting edge.
Blade about 4" long.
Incannel Gouges - F11 1/4" F12 3/8" F13 1/2" F14 5/8" F15 3/4" F16 1"
Outcannel Gouges - F17 1/4" F18 3/4" F19 1/2" F20 5/8" F21 3/4" F22 1"
Registered Mortice Chisel.
A specialist chisel designed for chiselling mortices but which can also be used for heavy duty work. Blade about 4
1/2" long.
F23 1/4" F24 1/2" F25 3/4" F26 1"
Cranked Bevel Edge Paring Chisels.
The bent, or cranked neck design of these special paring chisels allows the craftsman to use the chisel with the
blade absolutely flat on the stock at all times. Blade about 8 3/4" long.
F27 1/4" F28 1/2" F29 3/4" F30 1" F31 1 1/4"
Long Thin Bevel Edge Paring Chisels.
These chisels with relatively thin blades taper towards the cutting edge. Blade about 8 3/4" long.
F32 1/4" F33 1/2" F34 3/4" F35 1" F36 1 1/4"
Bevel Edge Socket Chisels.
The strength of the blade and socket forging is unequalled for paring and prying.
Leather tipped ash handle. Blade about 7 1/4" long.
F37 1/4" F38 3/8" F39 1/2" F40 5/8" F41 3/4" F42 1" F43 1 1/2"
Heavy Duty Socket Firmer Chisel.
These chisels have a thicker and longer socket than our bevel edge model for added strength and durability. Blade
about 8" long.
F44 1/2" F45 3/4" F46 1" F47 1 1/2" F48 2"
Offset Sockets.
These heavy duty offset socket chisels are used for getting into awkward corners which you cannot reach with
straight chisels.
F65 1/2" F66 3/4" F67 1" F68 1 1/2" F69 2"
Short Cranks.
These shorter 41/2" blades are easier to control than the standard longer models. Their offset handle design keeps
the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making
work in confined spaces much easier.
F61 1/4" F62 1/2" F63 3/4" F64 1"
Swan Necks.
A swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck. The 1/4" size
can be used to clean other sizes of mortices. Also available in sizes 5/16" & 3/8".
F70 1/4" F71 5/16" F72 3/8"
21