here - Resource Recovery Systems, Inc.
Transcription
here - Resource Recovery Systems, Inc.
elcome to the Wood Beaver Forestry Equipment Catalog ™ Thank you for taking the time to inquire about the WOOD BEAVER Forestry Products. Resource Recovery Systems has been with the forestry industry for over 15 years, servicing & selling all types of forestry equipment. We are the North American Distributor for the Finland based forestry equipment manufacturer, Maaselän Kone Oy. We are excited to introduce the Hakki Pilke “Wood Beaver” Forest machinery equipment line. We looked for a unit that was small, affordable, well built and versatile all in one processor and we found it with the Wood Beaver Firewood Processors. The processors are manufactured in Finland and the manufacture produces over 3500 units a year and are by far the largest manufacture of Firewood Processors in the world. There are a variety of models to fit everyone’s need. From hydraulic splitters to chainsaw or circular saw operated cutting models. All models are PTO driven, but can be upgraded to a 19hp diesel or 24hp gas motor. They have the fastest splitting time on the market, only 2.8 seconds! Our best selling unit is the 1X37, an all in one in-feed, saw, splitter and conveyor. We entered this machine at the 2007 Sawmill & Woodlot Firewood Processing Competition in South Carolina. The 1X37 processed 2.375 full cords in 18 min. 10 sec. (7.84 cords/hr) with a setup time of 1 min. 20 sec. and a tear-down time of 54.4 sec. Proving to be the fastest and most affordable processor on the market! The Resource Recovery sales team is always there ready to help, whether its with information before the sale and during the sale or support after the sale with warranty or technical questions. Enclosed are a pricing sheet and a DVD. You can also view the machines on the web at WOODBEAVER.NET. We look forward to serving you, and answering any questions you may have, 1-800-569-6813 or E-mail: [email protected]. Regards, Resource Recovery Systems, Inc. Scott, Jeni, Mark, Mike, Larry, Becky, Kari and Mike. 2 THE FIREWOOD FACTORY WITHIN MINUTES OF ARRIVING ON SITE THE MACHINE IS READY FOR OPERATION Three easy to operate hydraulic control levers control the: - infeed and cross of the wood. - the height adjustment of the splitting blade. - the raising and lowering and side shift of the discharge conveyor. The infeed conveyor is raised and lowered using a self locking hand winch. Logs, to measure: Precise optical measuring of the log length. The hydraulic actuated clamp roll keeps the log firmly on the cross cut deck. TECHNICAL SPECIFICATIONS: Saw Bar: Power Demand: Optional 12 way wedge The discharge conveyor folds and shifts hydraulically both vertical and horizontally. Radial stacking conveyor. The discharge conveyor is moved hydraulically through an arc of 7’2”. 20” (404) 40+ PTO HP / 15KW 540 PTO Output bulk/hour: 2-3+ cords/hour Splitting Blade (Standard) 8-Way splitting blade Optional 4, 6, 8 & 12 Way Wedge Max diameter of logs: 18.5" Hydraulic pressure: 2500 PSI Volume of oil tank: 33 gallon – oil included as Standard Length of conveyor in work position: 13’ Length of infeed conveyor: 8’ 5” *Hydraulic Radial Stacking Conveyor Weight: 3500 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic Log-stand - Hydraulic operated infeed deck - Optional Multispeed 3 Cutting: Positive mechanical power transfer. Cutting chain can be stopped at any time. Splitting: Green Speed splitting system Technology for high productivity with minimum power regardless of log diameter. Service points are Inclined feed Spring loaded conveniently conveyor holds the pressure wheel holds accessible under pro- log in the right place. the log in place. tective covers. Safety: Protective covers (splitting and cutting) must be closed for the machine to work. Opening the covers will stop the machine. Splitting axe with last release - axe can be changed rapidly. The length measuring stopper moves providing a smooth cut and allowing the piece to fall neatly into the chute. TECHNICAL SPECIFICATIONS: Saw Bar: Power Demand: Conveyor belt is run by a hydraulic motor at the top of the conveyor, which the speed is adjusted on the control panel. The splitting channel has a grid underneath which allows the split firewood to stay clean of splinters and waste wood. Radial stacking conveyor. 4 18” (3/8”, 68 links) 20 HP / 10 kW 540 PTO Output bulk/hour: 1-2 full cords/hour (based on 128 cu ft.) 2 and 4 way Splitting Blade included as Standard Optional: 6 & 8 Way Wedge Max diameter of logs: 17.5" Splitting Force: 8,378 to 29,101 lbs Hydraulic pressure: 2800 PSI Volume of oil tank: 17 gallon –oil included as Standard Length of conveyor in work position: 13’ Length of feed conveyor: 7’ 2” Weight: 2,348 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic Log-stand - Hydraulic adjustable splitting blade - Portable power pack Cutting: Splitting: Positive mechanical power transfer. Splitting executed by two splitting units. Maximum Cutting chain can be stopped at any production regardless of the size of the wood has been time. achieved by using the power and speed transformer. Safety: Protective covers (splitting and cutting) must be closed for the machine to work. Opening the covers will stop the machine. Inclined feed conveyor holds the log in the right place. Service points are conveniently accessible under protective covers. The length measuring stopper moves providing a smooth cut and allowing The piece to fall neatly into the chute. Spring loaded pressure wheel holds the log in place. TECHNICAL SPECIFICATIONS: Saw Bar: Power Demand: Conveyor belt is run by a hydraulic motor at the top of the conveyor, which the speed is adjusted on the control panel. The splitting channel has a grid underneath which allows the split firewood to stay clean of splinters and waste wood. 16” (.325” , 66 links) 20 HP / 10 kW 540 PTO Output bulk/hour: 1-2 Full cords/hour (based on 128 cu ft.) 2 and 4 way Splitting Blade included as Standard Optional: 6 Way Wedge Max diameter of logs: 15.5” Splitting Force: 12,787 and 21,164 lbs Hydraulic pressure: 2800 PSI Volume of oil tank: 17 gallon –oil included as Standard Length of conveyor in work position: 13’ Length of feed conveyor: 7’ 2” Weight: 2,348 lbs. Dual Splitting Axes can be changed rap- Optional Equipment: - Hydraulic Log-lifter idly. - Hydraulic Log-stand - Hydraulic adjustable splitting blade - Portable power pack 5 Firewood Faster, Safer, Easier Wood Beaver 1X Easy All functions of the machine are operated hydraulically: log feed, cross-cutting and height adjustment of the splitting blade. Infeed Conveyor: The Feed Conveyor carries the log into the machine. The log infeed can be stopped and reversed. Foot operated splitting for the last piece of log. Adjustable Folding Discharge Conveyor: The 13’ conveyor folds easily for transport. Conveyor height is adjusted with a hand operated selflocking winch. Interchangeable Wedge Standard wedge the wood can be split into 2 or 4 pieces. A 6 way wedge is an option. 6 During cutting the measuring disc deflects, enabling the log to drop down unobstructed. Maintenance: The sawbar cover is opened using a wrench. This allows easy access for maintenance. TECHNICAL SPECIFICATIONS: Saw Bar: Power Demand: 16” 15 HP / 7.5 KW 540 PTO Output bulk/hour: 1-2+ cords/hour 2 & 4 way Splitting Blade (Standard) Optional: 6 Way Wedge Max diameter of logs: 15.5" Splitting force: 7.0 Ton Hydraulic pressure: 2600 PSI Flow of hydraulic pump: 11.6 GPM Volume of oil tank: 10.5 gallon –oil included as standard Length of conveyor in work position: 13’ Length of feed conveyor: 7’ 2” Weight: 1500 lbs. Optional Equipment: - Hydraulic Log-lifter - Hydraulic Log-stand - Hydraulic adjustable splitting blade - Portable Power pack Circular saw cutting and hydraulic splitting. A machine with its own hydraulics, using a tractor engine or an optional electric engine as a power source. Logs can be slit into 2, 4 or 6 pieces and removing the cutting blade the small logs can be cut into desired lengths. Cutting with a circular saw. Firewood production made easy! Equipped with PTO shaft and 3mm Loading Conveyor. Crosscut table: Measurement: Emergency stop: Ergonomically correct, balanced crosscut table is fitted with contoured log support rollers. Log length can be measured quickly and easily and pre-set to the desired length. The log stop deflects as the log is cut, allowing the wood to fall unobstructed into the splitting chute. In an emergency, all functions of the machine can be stopped using a foot operated pedal. TECHNICAL SPECIFICATIONS: Circular Saw: Power Demand: Splitting Mechanism: As the log drops into the splitting chute it activates the splitting mechanism. When not in use, the conveyor is folded and locked in the vertical position. The machine is now compact for easy transport and storage. 27.5” (700 mm) 15-25 PTO, HP / 7.5KW 540 PTO Output bulk/hour: 1 + cords/hour Splitting Blade (Standard) A blade that splits into 2 or 4 pieces Max diameter of logs: 11.8" Hydraulic pressure: 2600 PSI Flow of hydraulic pump: 11.6 GPM Volume of oil tank: 10.5 gallon –oil included as Standard Length of conveyor in work position: 10.5’ Length of feed conveyor: 7’ 2” * Includes Hakki Conveyor Weight: 1000 lbs. Optional Equipment: - Log Rack - Portable power pack -Blades: Tungsten Carbide Tipped Blade Standard Blade - Hardened Steel 7 NEW! Hydraulic sawbar, hydraulic discharge conveyor and hydraulic splitting. Compact size makes it easy to move and transport. Hawk is available with a combustion engine (Honda), tractor drive or electric drive. Transportation: Compact size Easy transport Fast into operating condition 6-way blade: A 6-way blade produces firewood in an instant. Discharge: Hydraulic Sawbar. Hydraulic discharge conveyor TECHNICAL SPECIFICATIONS: Sawbar: Power Demand: 13” 540 PTO / 15 PTO HP or 13 HP Gas Honda Output bulk/hour: 1 + cords/hour Splitting Blade (Standard) A blade that splits into 2 & 4 pieces Optional: 6 Way Wedge Max diameter of logs: 11.5" Hydraulic Pressure: 2900 PSI Length of conveyor in work position: 10’ Length of feed conveyor: 6’ * Includes Hakki Conveyor Weight: 1000 lbs. 8 The traditional way of wood splitting. Cut the log with the circular saw and use the splitting cone to split it. Powered by tractor engine, electric drive or combustion engine. HAKKI PILKE eagle for large and small logs. It is easy to use & transport. Emergency stop in accordance with CE safety regulations. Stops in 5 seconds. Ergonomically correct splitting rack for small and large logs. 6.5 horsepower combustion engine 4 KW electric drive. TECHNICAL SPECIFICATIONS: Circular Saw: Power Demand: 27.5” 540 PTO or 6.5 HP Gas Honda Output bulk/hour: 1 cords / hour Splitting Blade (Standard) A splitting screw with changeable tip Max diameter of logs: 11.5" Weight: 400 lbs. Options: 6.5 hp Gas Honda 9 100 A solution for splitting large logs. Instant adjustment of the height of the splitting blade enables splitting into two or four pieces. The length of the splitting motion is adjustable according to the length of the log. Splitting with just one motion and without splinters. Adjustment of the splitting blade Splitting Blade: The height of the splitting blade can be easily adjusted (four-way splitting is possible) The splitting action can be steplessly adjusted according to the length of the log. 10 Easy to control: No splinters: Pull the levers together and the splitting starts. Returns back into starting position automatically. With a single splitting motion the log is halved splinterlessly. TECHNICAL SPECIFICATIONS: Hydraulics required: Required oil flow and oil pressure: Splitting cylinder diameter: Adjustable Splitting Length from 10” to 42” Single function 5.28 gal/min, 2610 PSI 70mm/ 2.75 in Triple your profits with a Wood Beaver™ Firewood Bundler The Wood Beaver Firewood Wrapper System is designed to quickly stretch-wrap bundles of firewood. These machines are designed to wrap firewood from 12” to 24” long. The tension spring clutch adjusts how tight the wrap stretches. The proper tensioning of the clutch spring nearly doubles the length of the wrap. This produces a clean, economical, self-tightening bundle easily stored & carried. Open ended bundles allow the wood to dry in storage. Beaver Wrapper is fast, 12 to 15 sec actual wrap time plus loading & unloading. Rates of 75 bundles and up an hour are common for a single operator on unit. Hold the wrap across the top of the wood bundle and step on the peddle and you are ready to go. - Four drop thru baskets included. (Have one person filling the baskets while the other is wrapping! - Equipped with ¼ HP (40 rpm) electric motor. HD gear reduction. - ONLY available in 3/4” Cubic ft. - 1-12” roll of 80 gauge wrap included & sample of handles. - Portable mounted on 8” wheels and rolls like a two wheeler. Width 37”, Depth 40”, Height 53”, Weight 230 lbs. Model: Quick-Load (F.O.B. Hartford WI) Units can be custom built to fit your needs - CALL FOR PRICING. Optional sizes will be quoted. $1995.00 The Wood Beaver Twister wrapper makes it easy to personalize your product for pricing and company recognition. Profit calculator for the Wood Beaver Twister Firewood Bundler Wood packages described below are based on a .75 cubic foot bundle 170 packages per cord (each cord based on a 4' x 4' x 8' full cord) 128 cu ft If you sell your cordwood at $150 per cord you will get $15,000 for every 100 cords of wood sold $175 per cord you will get $17,500 for every 100 cords of wood sold $200 per cord you will get $20,500 for every 100 cords of wood sold If you sell your packages at Packages @ $2.00 per = $340.00 per cord or $20,000 for 100 cords Packages @ $2.25 per = $382.50 per cord or $22,500 for 100 cords Packages @ $2.50 per = $425.00 per cord or $25,000 for 100 cords 11 A 12” 1500 ft roll will wrap approximately 200 12”-13” diameter bundles with 3 turns or 150 bundles with 4 turns of wrap. Also available for purchase: Web nylon handles Advantages of a Wood Beaver Twister Firewood Bundle Owning a Beaver Wrapper overcomes the problems of customers overloading bushel baskets, wheelbarrows or single armloads. ü The Owner determines the size of the bundle. ü Wrapping with a Beaver Wrapper is faster than bagging. ü Wrapping with a Beaver Wrapper is faster and cleaner than tying with string. ü Stretch wrapping holds wood securely during handling due to its elasticity. ü Open-ended bundles allow the wood to dry in storage. ü 115-volt ¼ horsepower gear motor drive. ü 2-3 year limited Motor warranty. ü Can be used at remote locations with a generator. 7 most profitable & popular income plans: ü ü ü ü ü ü ü On site packaging at customer's location. Sell packaged wood to local retail outlets. Sell to mass merchandisers. Shrink wrap other products. Sell for home heating use. Machine rental to others. Sell to campgrounds. Increase your speed & efficiency with a custom turn table! Call for pricing! Units are palletized and shipped regular truck freight from Hartford, WI. SOME ASSEMBLY REQUIRED CALL WITH ANY QUESTIONS 1-800-569-6813 This is a great unit for minimal cost. www.woodbeaver.net ™ 12 Credit Cards ACCEPTED VISA / MASTER CARD Available Options Choose from many different options to add to your Wood Beaver Firewood Processor. ™ Wedges 1X37 Hydraulic Log Lifter A blade for splitting logs into 6 parts. The blade will be installed into a firewood processor instead of the standard 4-way splitting blade. The picture shows a 1X37 6-way blade. The wood lifting device lowers hydraulically down to the ground, so you can easily roll the tree trunks on to it and lift them conveniently on to the infeed conveyor. “Z”Wedges 2-way wedge - std 4-way wedge - std 1X37 wedges 2-way wedge - std 4-way wedge - std 6-way wedge - opt Green Speed wedges 6-way wedge 8-way wedge 12-way wedge 60 oh wedges 4-way wedge - std 6-way wedge - opt 1X37 Log rack Available in Manual & Hydraulic A log rack that can be easily filled from a loader. Just as easily you can move the trunks onto the infeed conveyor. Hydraulic Feeding Table -Live Deck Fits BigX47, 1X37, and Green Speed Models. Hydraulic feeding table 2 m. Strong link chains transfer the logs to the sorting mechanism by means of which the logs are transferred to the toothed transfer rollers. The rollers and the infeed conveyor of the machine transfer the tree for cutting. The deck is controlled from the machine. Extension for Hydraulic Feeding Table Add an additional 9.8 ft to your feeding table. Big X wedges 6-way wedge - opt 8-way wedge - std. 12-way wedge - opt. 60 oh Blades -Tungsten Carbide Tipped Blade 27.5” -Standard Blade 27.5” - Hardended Steel 1X37 Infeed Extension Standard and Easy Models Add an additional 3 feet to your 1X37. Sacking rack Net sack Sacking rack or support frame, where you can drop firewood directly from the conveyor. Holds 1.1 Metric yards. (just under 1 face cord) Sold in packs of 50 or 100 Net sacks for firewood make handling easier and speed up drying. Holds 1.1 Metric yards. (just under 1 face cord) 13 Portable Power Take-off and Hydraulic Units ™ These units don’t only save you time, they save you money. Uses *Run Wood Beaver firewood processors *Operate PTO elevators Hydraulic Models *Operate log splitters *Operate hydraulic elevators *And many other hydraulic and PTO powered equipment Model 24-HD ELH - PTO Only “The Beaver” Hard working unit with the power to run the 1X37 and lower models or other equipment requiring more PTO horsepower. Approx. 325 lbs. Model D-19-HD PTO Only Heavy duty diesel unit. More powerful and less expensive to run and maintain than a gas model. Lombardini Air cooled/diesel, 3600 rpm Approx. Dry weight: 325lbs. PTO Adjustable Height Stand Adjusts from 15” - 24” Special orders please give 4 to 6 weeks processing time. Optional Accessories: * Light kit * Tach/proofmeter * 12V remote electric solenoid valve Model # (indicates horsepower) Low RPM Full Throttle High RPM Full Throttle Starting System Main Frame Width Gallons Per Minute PSI 24 -HD ELH PTO only 520 7.5:1 reduction 600 6.5:1 reduction Electric 58” N/A N/A D-19-HD 540 600 Electric 14 Price Call for pricing 58” N/A N/A Call for pricing 1-800-569-6813 www.woodbeaver.net Hartford, Wisconsin 53027 Dealers wanted! Inquire by sending an e-mail to [email protected] or call Scott @ 1-800-569-6813 Financing made easy! Resource Recovery Systems works with you to accommodate your finance needs. We work closely with leasing companies from purchase start to finish. * Save time and conserve your working capital * Minimal down payment * Flexible terms * Prompt dependable service P.O. Box 97 Ada, MI 49301-0097 800-589-3336 www.nelinc.com Zach Doohen 101 N Main Ave Suite 215 Sioux Falls, SD 57104 1- 866-769-2345 1- 605-271-7133 Fax [email protected] www.yourcapitalpartner.com Steve or Jeff 19 N. Pearl Street Suite 2 Covington, OH 45318 800-347-4977 Terry Marc 2912 Pioneer Rice Lake, WI 54868 1-866-885-1875 [email protected] Warranty: All units come with a one (1) year warranty on parts. Call 1-800-569-6813 for Service or Warranty issues. Parts & Service: We service and carry parts on all models we sell. 15 ™ Distributor: P.O. Box 270179, 1117 Western Drive Hartford, WI 53027 1-800-569-6813 www.woodbeaver.net Dealer: Bundler Picture here