berita acara pemberian penjelasan pengadaan alat laboratorium

BERITA ACARA PEMBERIAN PENJELASAN
PENGADAAN ALAT LABORATORIUM STANDARISASI, KALIBRASI DAN
INSTRUMENTASI UPTD METROLOGI
Nomor
Tanggal
Lampiran
: 027/02/001-ALATLAB.METRO/IV/2015
: 21 April 2015
: 26 (dua puluh enam) lembar
Pada hari ini Selasa tanggal Dua Puluh Satu Bulan April Tahun Dua Ribu Lima Belas
bertempat di Unit Layanan Pengadaan Provinsi Kalimantan Timur Jl. Gajah Mada No 2
Samarinda, kami selaku Pokja Pengadaan Alat Laboratorium Standarisasi, Kalibrasi dan
Instrumentasi UPTD.Metrologi, telah mengadakan Rapat Pemberian Penjelasan secara
Online di Website http://spse.kaltimprov.go.id, dengan rincian paket sebagai berikut:
Nama Paket
: Pengadaan Alat Laboratorium Standarisasi, Kalibrasi dan Instrumentasi
UPTD.Metrologi
Nilai HPS
: Rp 2.781.796.600,Sumber Dana : APBD Provinsi Kaltim Tahun Anggaran 2015
HAL - HAL YANG DISAMPAIKAN :
I. Pemberian penjelasan dibuka tanggal 21 April 2015 Pukul 13.00 WITA dan ditutup Pukul
15.30 WITA;
II. Hadir Dalam Rapat Online :
1) Kuasa Pengguna Anggaran (KPA) Pengadaan Alat Laboratorium Standarisasi,
Kalibrasi dan Instrumentasi UPTD.Metrologi;
2) Pejabat Pelaksana Teknis Kegiatan (PPTK) Pengadaan Alat Laboratorium
Standarisasi, Kalibrasi dan Instrumentasi UPTD.Metrologi;
3) Pokja Pengadaan Alat Laboratorium Standarisasi, Kalibrasi dan Instrumentasi
UPTD.Metrologi.
III. Hasil Penjelasan :
Sampai dengan berakhirnya Pemberian Penjelasan Paket Pekerjaan Pengadaan Alat
Laboratorium Standarisasi, Kalibrasi dan Instrumentasi UPTD.Metrologi ada 15 (lima
belas) pertanyaan yang disampaikan oleh rekanan. (copy penjelasan secara online
terlampir).
Demikian Berita Acara ini dibuat pada tanggal, bulan, tahun di atas dan merupakan satu
kesatuan yang tak terpisahkan dengan Dokumen Lelang.
Samarinda, 21 April 2015
POKJA PENGADAAN ALAT LABORATORIUM STANDARISASI, KALIBRASI DAN
INSTRUMENTASI UPTD.METROLOGI
Ttd
LAMPIRAN BA. PEMBERIAN PENJELASAN
I. PERTANYAAN PENYEDIA & TANGGAPAN PANITIA
*Keterangan : Ada 15 pertanyaan dan sudah ditanggapi oleh Pokja ULP.
II.
RAB DAN SPESIFIKASI TERLAMPIR
III.
PENYESUAIAN PERSYARATAN KUALIFIKASI
SEMULA :
1) Peserta Yang Berbadan Usaha Harus Memiliki Surat Ijin Usaha Perdagangan
(SIUP) Kode 47726, Perdagangan Eceran Alat Laboratorium, Farmasi Dan
Kesehatan;
2) Peserta Yang Berbadan Usaha Harus Memiliki pengalaman pada subbidang
Perdagangan Eceran Alat Laboratorium, Farmasi Dan Kesehatan;
3) Peserta Yang Ber Berbadan Usaha HarusMemiliki tenaga ahli/teknis/terampil
dengan kualifikasi keahlian sebagaimana spesifikasi teknis;
MENJADI :
1) Peserta Yang Berbadan Usaha Harus Memiliki Surat Ijin Usaha Perdagangan
(SIUP) Kode 47726, Perdagangan Eceran Alat Laboratorium, Farmasi Dan
Kesehatan;
2) Peserta Yang Berbadan Usaha Harus Memiliki pengalaman pada subbidang
Perdagangan Eceran Alat Laboratorium, Farmasi Dan Kesehatan;
IV.
PERSYARATAN LAINNYA TETAP MENGACU SEBAGAIMANA DOKUMEN
LELANG (LEMBAR DATA PEMILIHAN & LEMBAR DATA KUALIFIKASI)
V.
KAMI INFORMASIKAN KEPADA SELURUH CALON REKANAN APABILA ADA
PIHAK PIHAK YANG TIDAK BERTANGGUNG JAWAB MENGATASNAMAKAN
KPA/PPTK/PANITIA MEMINTA IMBALAN DALAM BENTUK APAPUN
MENJANJIKAN KEMENANGAN, UNTUK TIDAK DITANGGAPI DAN
HENDAKNYA MELAKUKAN KLARIFIKASI/KONFIRMASI KE KANTOR UNIT
LAYANAN PENGADAAN PROVINSI KALTIM, GEDUNG B LANTAI 3 KANTOR
GUBERNUR KALTIM, JALAN GAJAHMADA NO.2. MARI KITA LAKSANAKAN
PENGADAAN YANG BAIK DAN BENAR, MEWUJUDKAN PEMERINTAHAN
BERSIH DAN BERWIBAWA MENUJU KALTIM MAJU 2018, TERIMA KASIH
POKJA PENGADAAN ALAT LABORATORIUM STANDARISASI, KALIBRASI DAN
INSTRUMENTASI UPTD.METROLOGI
Ttd
LAMPIRAN II. PERUBAHAN NOMENKLATUR RAB
Nomor : 027/02/001-ALATLAB.METRO/IV/2015
Tanggal : 21 April 2015
RENCANA ANGGARAN BIAYA (RAB)
Program
: Peningkatan Sarana dan Prasarana Aparatur
Kegiatan
: Pengadaan Peralatan Gedung Kantor
Pekerjaan
: Belanja Modal Pengadaan Alat-Alat Laboratorium Fisika/Geologi/Geodesi
Lokasi
: Jl. Dahlia No. 6 Samarinda
Sumber Dana
: APBD Provinsi Kalimantan Timur
Tahun Anggaran
: 2015
( Peralatan dan Perlengkapan Standar UPTD Metrologi)
RAB SEMULA :
Uraian
No.
1
Mass Comparator 2 unit
Satuan
pkt
Volume
Harga Satuan
(Rp.)
Jumlah Harga
(Rp.)
1.00
-
- Kapasitas 22 g, readibility 1 mirogram
-
- Kapasitas 2.300 g, readibility 0,1 miligram
-
2.
Anak Timbangan Standar kelas E2, Massa Nominal 1-500 mg dan 1-5 kg,
massa nominal 10 kg dan nominal 20 kg
3.
set
1.00
-
set
1.00
-
paket
1.00
-
Weigh Fork untuk 2 kg, 5 kg, Aluminium grip handler untuk 10-20 kg dan
Weigh Fork untuk 500 g dan 1.000 g
-
4.
Master Meter Arus BBM ( 1 USD = Rp. 13.300,00)
5.
Termocouple digital
unit
2.00
-
6.
Alat UjiThermohydrometer
set
1.00
-
7
Alat Ukur Kelembaban/Thermometer Ruangan
paket
1.00
-
8
Peralatan Kalibrasi Ukur Tetap
paket
1.00
-
9
Bourje
set
1.00
-
10
Meja Tahan Getar
unit
5.00
-
11
Instalasi Uji Komparator Panjang
paket
1.00
-
12
Environment meter
unit
1.00
-
13
Mag+Probe with Leak Detection and Cabling (Spare Parts)
paket
1.00
-
14
Dehumudyfier
unit
5.00
-
15
Oven
unit
1.00
-
16
Protactor (Alat Ukur Sudut)
unit
1.00
-
17
Humidity
unit
1.00
-
18
Stop Watch
unit
1.00
-
19
Water Distiler
unit
1.00
-
20
Power Analyzer
unit
1.00
-
21
Precision Thermometer
unit
1.00
-
22
5 in 1 Meter
unit
1.00
-
23
CO2 Meter
unit
1.00
-
24
Meter Air
unit
1.00
-
(I)
Jumlah Harga Pekerjaan
-
(II)
Pajak Pertambahan Nilai (PPn) = 10 % + (I)
-
(III)
Jumlah Harga Pekerjaan termasuk PPn
-
(IV)
Dibulatkan
-
Samarinda,
April 2015
DIREKTUR PT/CV………………….
RAB PERUBAHAN :
RENCANA ANGGARAN BIAYA (RAB)
Program
: Peningkatan Sarana dan Prasarana Aparatur
Kegiatan
: Pengadaan Peralatan Gedung Kantor
Pekerjaan
: Pengadaan Alat Laboratorium Standarisasi, Kalibrasi dan Instrumentasi UPTD METROLOGI
Lokasi
: Jl. Dahlia No. 6 Samarinda
Sumber Dana
: APBD Provinsi Kalimantan Timur
Tahun Anggaran
: 2015
Uraian
No.
1
Mass Comparator 2 unit
Satuan
pkt
Volume
Harga Satuan
(Rp.)
Jumlah Harga
(Rp.)
1.00
-
- Kapasitas 22 g, readibility 1 mirogram
-
- Kapasitas 2.300 g, readibility 0,1 miligram
-
2.
Anak Timbangan Standar kelas E2, Massa Nominal 1-500 mg dan 1-5 kg,
massa nominal 10 kg dan nominal 20 kg
3.
set
1.00
-
set
1.00
-
paket
1.00
-
Weigh Fork untuk 2 kg, 5 kg, Aluminium grip handler untuk 10-20 kg dan
Weigh Fork untuk 500 g dan 1.000 g (Weighfork = Tweezers dalam spek)
-
4.
Master Meter Arus BBM ( 1 USD = Rp. 13.300,00) (lihat juga anwising)
5.
Termocouple digital
unit
2.00
-
6.
Alat UjiThermohydrometer (Dalam spek Portable Digital Density Meters)
set
1.00
-
7
Sensor Pelengkap Alat Ukur Suhu (Thermocouple Probe Surface)
paket
1.00
-
8
Peralatan Kalibrasi Ukur Tetap
paket
1.00
-
9
Bourje
set
1.00
-
10
Meja Tahan Getar
unit
5.00
-
11
Instalasi Uji Komparator Panjang
paket
1.00
-
12
Environment meter
unit
1.00
-
13
Mag+Probe with Leak Detection and Cabling (Spare Parts)
paket
1.00
-
14
Dehumudyfier
unit
5.00
-
15
Oven
unit
1.00
-
16
Protactor (Alat Ukur Sudut)
unit
1.00
-
17
Humidity
unit
1.00
-
18
Stop Watch
unit
1.00
-
19
Water Distiler
unit
1.00
-
20
Power Analyzer
unit
1.00
-
21
Precision Thermometer
unit
1.00
-
22
5 in 1 Meter
unit
1.00
-
23
CO2 Meter
unit
1.00
-
24
Meter Air
unit
1.00
-
(I)
Jumlah Harga Pekerjaan
-
(II)
Pajak Pertambahan Nilai (PPn) = 10 % + (I)
-
(III)
Jumlah Harga Pekerjaan termasuk PPn
-
(IV)
Dibulatkan
-
Samarinda,
April 2015
DIREKTUR PT/CV………………….
No
1
Nama Alat
Mass Comparator
Spesifikasi Teknis
- Maximum Load 22 g
- Readability 1 µg
- Repeatability at nominal load (5x ABA, measure
at) 1,5 µg (20 g)
- Repeatability at low load (5x ABA, measure at)
0,7 µg (1 g)
- Repeatability typical ABA 0,5 µg + 4x10-8 .Rgr
- Electrical weighing range 0 - 22 g
- Linerarity (electrical weighing range) ± 0,006 mg
(6 µg)
- Eccentric load deviation (at test load) 0,00 mg
(20 g)
- Setting time ≤ 3,5 s
- Adjusment built-in ProFACT
Dual Draft Shield Motorized (2x motorized)
- Self centering hanging pan and grid pan
- Color graphic display with touch screen
operation
- Smartsens for automatic operation
Status Light Indicator
- Green : Comparator Ready for Used
- Yellow : in Process, automatic calibration
- Red
: Comparator not ready to used, error
are shown
Admissible environmental conditions
- Temperature (oC)
: 10 - 30
o
- Max temp Change ( C /12h) : 0,5
- Relative humidity (%)
: 40-70
For Verification/Calibration Weight
- OIML Calibration Range E1
: 50 mg – 20 g
- OIML Calibration Range E2
: 1 mg – 20 g
- OIML Calibration Range F1
: 1 mg – 20 g
- OIML Calibration Range F2
: 1 mg – 20 g
- OIML Calibration Range M1 : 1 mg – 20 g
MC Link Software for WeighhCom Application
(Software koneksi ke PC/Komputer, untuk
perhitungan kalibrasi AT)
Pelatihan Penggunaan alat MC di Samarinda
Pelatihan Kalibrasi Alat Timbang Bersertifikat,
sesuai Standard ISO 17025
Instalasi MC oleh Tenaga Ahli Bersertifikat
Pabrikan
Sertifikat Hasil Pengujian dengan
Komputerisasi
Didukung oleh Service Center Terakreditasi
ISO 9001
Jumlah
2
Mass Comparator
- Maximum load 2.300 g
- Readability 0,1 mg
- Repeat ability at nominal load (5x ABA,
measure at) 0,1 mg (2 kg)
- Repeatability at low load (5x ABA, measure at)
0,08 mg (100 g)
- Repeatability typical ABA 0,06 mg + 9x10-9.Rgr
- Electrical weighing range 0 - 2.300 g
- Linerarity (electrical weighing range) ± 1 mg
- Eccentric load deviation (at test load) 0,0 mg (1
kg)
- Setting time ≤ 3,5 s
- Adjusment Built-in ProFACT
Self Centering pan (LevelMatic) – eliminate
corner load error
Color Graphic display with touch screen operation
SmartSens for Automatic Operation
Status Light Indicator
- Green : Comparator Ready to Used
- Yellow : in Process, automatic calibration
- Red
: Comparator not ready to used, error
are shown
Level Control Warns if the balance is not
correctly leveled
Admissible environmental conditions
- Temperature (oC)
: 10 .. 30
o
- Max temp Change ( C /12h) : 0,5
- Relative humidity (%)
: 40-70
For Verification/Calibration Weight
- OIML Calibration Range E1
: 1 kg – 2 kg
- OIML Calibration Range E2
: 500 g – 2 kg
- OIML Calibration Range F1
: 50 g – 2 kg
- OIML Calibration Range F2
: 10 g – 2 kg
- OIML Calibration Range M1 : 200 mg – 2 kg
MC Link Software for WeighhCom Application
(Software koneksi ke PC/Komputer, untuk
perhitungan kalibrasi AT)
Pelatihan Penggunaan alat MC di Samarinda
Pelatihan Kalibrasi Alat Timbang Bersertifikat,
sesuai Standard ISO 17025
Instalasi MC oleh Tenaga Ahli Bersertifikat
Pabrikan
Sertifikat Hasil Pengujian dengan
Komputerisasi
Didukung oleh Service Center Terakreditasi
ISO 9001
3
Anak Timbangan E2
- Anak timbangan E2, Nominal 1 mg – 5 kg
sebanyak 28 unit
- Bahan Stainless steel with adjusting cavity
- Density : 8,0 kg/dm3
- Nominal 1 mg – 500 mg bentuk wire
- Nominal 1 g – 5 kg bentuk OIML standard,
silynder with knob
- Magnetic susceptibility < 0,01
- One Piece Design (MonoBloc)
- Dilengkapi dengan wadah kotak plastik
- Isi weight set : 1 mg (1 buah), 2 mg (2 buah), 5
mg ( 1 buah), 10 mg ( 1 buah), 20 mg (2 buah),
50 mg ( 1 buah), 100 mg (1 buah), 200 mg ( 2
buah), 500 mg ( 1 buah), 1 g (1 buah), 2 g (2
buah), 5 g ( 1 buah), 10 g ( 1 buah), 20 g ( 2
buah), 50 g ( 1 buah), 100 g ( 1 buah), 200 g ( 2
buah), 500 g ( 1 buah), 1 kg ( 1 buah) 2 kg ( 2
buah), 5 kg ( 1 buah)
- Anak timbang individual E2, nominal 10 kg,
dengan kotak plastik
- Anak timbang individual E2, nominal 20 kg,
dengan kotak plastik
- Sertifikat Metrologi/Laboratorium kalibrasi KAN
4
Portable Digital Density
Meters
-
-
Measuring Range : 0 - 2 g/cm3
Resolution 0,0001 g/cm3
Accuracy : ± 0,001 g/cm3
Measurement units : Density, Spesific Grafity,
Temperature Compensated Density,
Temperature Compensated Spesific Grafity,
Brix %, Alcohol, Baume Plato, API (table A,
Band D), % Sulfuric Acid, User Defined Unit
Temperature Measurement Range : 0 – 40 oC,
resolution : 0,1oC, display C or F
Temperature Compensation Automatic (Brix%,
Alcohol, Plato, API, %Sulfuric acid)
Calibration with dry air or pure water or other
density standard
Data memory up to 1.100 result
Dot matrix LCD display with backlit
Data interface RS232 or IrDA (optional)
Battery operation
Portable/handheld
5
Meja Tahan Getar/Tanpa
Kaki
- Ukuran : 60 x 90 x 15 cm
- Toping (permukaan meja) – Granit/Marmer
- Damping pad (peredam getaran)
6
Tweezers (WeighFork)
- Straight tips for weights 1 mg – 20 g, length 115
mm
- Straight tips for weights 1 mg – 20 g, length 220
mm
- Straight tips for weights 20 mg – 200 g, length
140 mm
- Bent tips for weights 20 g – 200 g, length 200
mm
- Bent tips for weights 1 mg – 200 g, length 130
mm
7
Mastermeter Arus BBM
(Mechanical Bulk Meters
Dan Masterload II
Electronic Meter
Controller)
Meter Type : Rotary Vane Positive
Displacement
Maximum Working Pressure : 10,5 bar (150 psi)
Flow Range : 387 to 3870 LPM (85 to 850 GPM)
Manifold Material : Steel
Static Seals : High Nitrile
Dynamic Seal : Fuorocarbon
Rotor : Alumunium
Flange Connection : 6’’ANSI 150 FF
Typical Accuracy : ±0.02 %
Repeatability : Within 0.02 %
Fitted With :
- Masterload II Electronic Master Meter
Standar Consist Of :
# Pulse Transmitter
# Display Unit;Display;Volume
Dispensed, Rate Of Flow, Totalizaer
#Temperature Compensation
# Power Supply Unit : Baseefa
Approval for zone 1 area, 240 VAC
# Tested To Master Meter Standard
- Certificate Calibration From Metrology Unit
- Yellow Label (Type Permission) From
Direktorat Metrology Bandung
8
Bourje
- Bahan Plat Kuningan Tebal minimal 4 mm
- Terdiri dari masing-masing alat uji takaran
kapasitas 0,5 dl; 1 dl; 2 dl; 0,5 liter; 1 liter; 2 liter;
5 liter; 10 liter dan 20 liter
- Daya baca 1 mm
- Dikemas dalam kotak kayu yang baik dan
bagian dalamnya dilapisi kain yang non
elektrostatis
9
Thermocouple digital
-
-
Dapat digunakan dengan sensor yang
berbeda
Kokoh dan mudah dibawa
Memiliki dua masukan untuk pengukuran
Terdiri dari dua tampilan
Mampu menampilkan dan menyimpan nilai
maksimum, minimum dan rata-rata hasil
pengukuran
Pembacaan dalam °C, °F, atau °K
Rentang Suhu -200 °C sampai dengan
1.372°C
Tingkat ketelitian suhu diatas -100 °C adalah
±[0,05%+0,3°C] untuk tipe J, K, T, dan E,
dibawah -100 °C adalah ±[0,20%+0,3°C]
untuk tipe J, K, dan E, dan ±[0,50%+0,3°C]
untuk tipe T
10
Sensor Pelengkap Alat
Ukur Suhu
(THERMOCOUPLE
PROBESURFACE)
-
-
11
Dapat digunakan dengan sensor yang
berbeda
Kokoh dan mudah dibawa
Memiliki dua masukan untuk pengukuran
Terdiri dari dua tampilan
Mampu menampilkan dan menyimpan nilai
maksimum, minimum dan rata-rata hasil
pengukuran
panjang kabel 1,3 meter dan panjang probe
min. 9,5 cm
Pembacaan dalam °C, °F, atau °K
Rentang Suhu -200 °C sampai dengan
1.372°C
Tingkat ketelitian suhu diatas -100 °C adalah
±[0,05%+0,3°C] untuk tipe J, K, T, dan E,
dibawah -100 °C adalah ±[0,20%+0,3°C]
untuk tipe J, K, dan E, dan ±[0,50%+0,3°C]
untuk tipe T
Peralatan Kalibrasi Tangki Roda Ukur
Ukur Tetap
- Bahan : roda dari kuningan, as roda dari
stainless steel/batang besi yang di cat
- Terdiri dari 2 buah roda besar, diameter sekitar
28 cm atau lebih, dipasang mengapit 1 buah
roda lebih kecil (roda pengarah), diameter
sekitar 25 cm
- Jarak antara roda besar 35 cm, roda pengarah
berada ditengah-tengahnya
- Ketiga roda dapat dipasang dan dilepas
-
Ban Ukur (Roll Meter)
- Bahan dari Carbon Steel dilapisi nylon atau
resin
- Kapasitas maximum pengukuran 30 meter,
daya baca 1 mm
- Dikemas dalam gulungan sehingga mudah
dibawa
- Sertifikat kalibrasi dari direktorat metrologi
Bandung
Depth Tape
- Bahan dari Stainless steel, atau carbon steel,
dilengkapi bandul pemberat dari bahan
stainless steel atau kuningan
- Kapasitas pengukuran 20 meter, daya baca 1
mm
- Dikemas dalam gulungan sehingga mudah
dibawa
- Sertifikat kalibrasi dari direktorat metrologi
bandung
Meter Gulung (Meter Saku)
- Berupa rollmeter dengan ukuran lebih kecil
- Bahan dari carbon steel dilapis resin
- Kapasitas pengukuran 5 meter daya baca 1 mm
- Sertifikat kalibrasi dari DIrektorat metrologi
Bandung
Mistar
- Bahan : Stainless steel, lebar sekitar 2,5 cm,
tebal sekitar 2 mm
- Kapasitas pengukuran : 40 cm, daya baca 1
mm
- Sertifikat kalibrasi dari direktorat metrologi
Bandung
Timbangan Pegas
- Berupa timbangan kecil dengan system pegas
tunggal, sederhana
- Digunakan untuk memperkirakan besarnya
kekuatan tarikan pada ban ukur, ketika
pengukuran keliling tangki
- Kekuatan maksimal 10 kg, daya baca 0,1 kg
Waterpass
- Bahan dari alumunium dilengkapi dengan kaca
penglihat untuk memonitor kedataran
Magnetic Clamp
- Magnet electronic yang dapat bersifat besi
biasa atau magnet dengan cara menyetel
tombolnya
- Dilengkapi dengan 2 batang pemegang dari
stainless steel dan 2 alat pengencang
- Digunakan untuk memegang mistar yang
ditempelkan ke dinding tangki
Bandul Pemberat
- Bahan pipa Stainless Steel diameter sekitar 75
mm, panjang sekitar 20 cm
- Dilengkapi dengan kaitan yang dapat
dibuka/dipasang
- Kedalam pipa dapat dimasukkan pemberat
berupa timah atau logam lain, sehingga berat
keseluruhan sekitar 5 kg
Siku-Siku Pembaca
- Bahan stainless steel, tebal sekitar 1 mm,
panjang sekitar 15 cm, lebar sekitar 10 cm
Katrol Tunggal
- Bahan dari besi, jenis katrol tunggal biasa
ukuran 3 inchi
Pasta Air, Pasta Minyak
Kawat Seling
- Panjang 50 meter diameter sekitar 1 mm
Tali Penarik
- Berupa tambang rami atau tambang plastic,
diameter sekitar ½ inch panjang 30 meter.
Kotak Penyimpanan
- Bahan kayu yang baik, tebal 1 cm atau lebih,
ukuran disesuaikan untuk menyimpan seluruh
peralatan strapping, kecuali tambang rami.
Kunci Inggris
Kunci Pas
Kunci L
Obeng (+) dan Obeng (-)
Tang Kombinasi
Sarung Tangan
Pegangan Ban Ukur
12
Spare parts (ATG Probe)
1. MAG + PROBE WITH LEAK DETECTION
(Setiap Probe / Sensor untuk 1 tangki dan
sudah termasuk Kit Pelampung & Riser Cap)
2. CABLING
Kabel data SWA 2 x 0,75 mm
13
Humidity Meter
FEATURES
 Humidity + Temperature + Dew point are
combined Sampling Time Approx. 0,8
second into one meter, intelligent and
professional.
















0,01 %RH resolution for the humidity
reading degree resolution for the humidity
reading.
Fast humidity measuring response time.
High accuracy and high precision.
Temperature
Dew point measurement.
Manual and auto manual data logger.
Data logger function with flexible sampling
time selection, can save max. 1.000
reading data with recall.
Just few panel buttons, easy operation.
Microprocessor circuit assures maximum
accuracy, provides special functions and
features.
Large LCD with two display, easy readout.
Heavy duty & compact housing case,
designed for easy carry out & operation.
Records Maximum and Minimum readings
with Recall.
Auto shut off saves battery life.
Data hold function for freezing the desired
value Included on display.
RS 232 PC serial interface.
Show the humidity & temperature values
on the LCD display at same time.
Built-in low battery indicator.
Wide humidity & temp. measuring range
Separate humidity & temp. probe, easy
operation. & remote measurement.
General Specifications
 Circuit Custom one-chip of microprocessor
LSI circuit.
 Display LCD size : 61 mm x 35 mm dual
function LCD display.
 Measurement Unit :
1. Humidity
2. Temperature
3. Dew point
 Response Time 5 to 30 seconds typically
@ Reach the 85% reading value
 Temperature compensation
Automatic temp. compesation for humidity
function.
 Sampling Time of Data Logger
Manual : Push the data logger button once
will save data one time.
Auto: 1, 2, 10, 30, 60, 600, 1.800, 3.600
seconds
 Data: Hold Freeze the display reading.













Memory Recall : Maximum & Minimum
value.
Sampling Time : Approx. 0,8 second
Power off : Auto shut off saves battery life
or manual, off by push button.
Data Output : RS 232 PC serial interface.
Operating : 0 to 50 0C.
Operating Main instrument : Less than
85% R.H.
Humidity Probe : 0 to 95 %RH.
Power Supply DC 9V battery( Alkaline or
Heavy duty type ).
Power Current Approx. DC 4,6 mA.
Weight : 306 g/ 0.67 LB. possible @
Battery is included.
Dimension
Main instrument :
180 x 72 x 32 mm (7,1 x 2,8 x1,3 inch)
Humidity Sensor Probe :
197 mm ( 7,8 inch ) in length.
Accessories Included :
Instruction manual........................1 PC
Humidity probe.............................1 PC
Carrying case................................1 PC
Optional
Accessories
:
RS232
cable/UPCB-01, USB cable/USB-01, Data
Acquisitio software, SW-U801-WIN
Data Logger software, SW-DL2005
Electrical Specifications (23±5 0C)
* Humidity/ Temperature
1. Humidity : - Range 10 % to 95 % R.H.
- Resolution 0,01 % R.H
- Accuracy ≥ 70% RH : ± (3%
reading + 1% RH).
< 70% RH : ± 3% RH.
2.Temperature : - Range 0 0C to 50 0C,32 0F to
122 0F.
- Resolution 0,01 degree
- Accuracy 0C – 0,8 0C, 0F – 1,5 0F.
* Dew Point
0
C
: Range -25,3 0C to 48,9 0C
Resolution 0,01 0C
0
F : Range -13.5 0F to 120,1 0F.
Resolution 0,01 0F
14
Dehumidifier (Pengatur
Kelembaban)
-
-
Dehumidifier with slim design and digital
display, also has 4 wheels for easy mobility,
washable filter, auto defrost function,
continuous drainage, full tank indicator, 3-level
fan speed and 24-hour timer, ionizer and
oscillation functions.
Capacity: 20 LITER
15
Alat Ukur
Suhu dan Kelembaban
Ruangan
(Thermohygrometer)
-
16
PROTACTOR
(Alat Ukur Sudut)
Rentang Suhu: 0 – 110 °C
Rentang Kelembaban: 20 – 95%
Mampu menyimpan 1.000 data suhu
Mampu menyimpan 1.000 data kelembaban
Resolusi suhu 0,1 °C
Resolusi kelembaban 1%
Mampu menyimpan daya listrik secara
otomatis ketika listrik padam
Didukung software penyimpan data dan
sistem cetak otomatis data yang tersimpan
FEATURES
 High - precision angle gage for accurate
angle measurement of machines, molds
and jigs
 Can be attached to height gages
BENEFITS
 High accuracy
 High Precision
SPECIFICATION
Graduation : 5 min. (0o-90o-0o)
Blade Edge Angle : 30o,45o&60o
DESCRIPTION
Universal Bevel Protractor 6 mm with Blade
Length
17
Meter Air
TYPICAL PERFORMANCE
- Nominal Diameter : 3 “
- Starting Flow Rate : 0,3 m3/h
- Accuracy ± 2% from : 1,2 m3/h
- Accuracy ± 5% from : 0,75 m3/h
- Admissible peak flow (10’ max) : 250 m3/h
- Max. admissible flowrate (continuous) : 120
m3/h
- Head loss at Qmax : 0,55 bar
- Max. admissible temperature : 50 °C
- Max. admissible pressure : 20 bar
- Min. scale interval : 2 L
- Indicating range : 9999999,9 m3
- Cyble HF pulse weight : 100 L
18
Stop Watch
- Times single or cumulative events from 1 μs to
999,999 hrs
- Timing resolution to 0.2 μs
- Selectable HH.MM.SS clock format or H, M or
S decimal format
- Inputs from NPN or PNP proximity switches,
contact closures, digital
- logic, magnetic pickups down to 12 mV, or AC
inputs up to 250 Vac
- Triggers on positive or negative pulse edges
-
- Universal 85-264 Vac / 90-300 Vdc or 10-48
Vdc / 12-32 Vac power
- Transducer excitation output (isolated)
- Wide choice of options:
 2 or 4 relays, mechanical or solid state
(isolated)
 1 or 2 analog outputs (isolated)
 Serial data I/O: Ethernet, USB, RS485,
RS232 (isolated)
19
Oven
VENTILATION AND CONTROL
- Adjustment of pre-heated fresh air admixture
by air flap control in 10% steps
- Vent connection with restrictor flap
- Adaptive multifunctional digital PID
microprocessor controller with high-definition
TFT-colour display
- Self-diagnostics for fault analysis
- 1 Pt100 sensor DIN class A in 4-wire-circuit
- Digital timer adjustable from 1 minute to 99
days, 23 hours
- Parameters adjustable on ControlCOCKPIT:
temperature (Celsius or Fahrenheit), fan
speed, air flap position, programme time, time
zones, summer time/winter time
- Set point WAIT function - the process time
does not start until the set temperature is
reached
- Resolution of display for setpoint values 0.1°C
up to 99.9°C, 0.5°C from 100°C and for actual
values 0.1°C (LED)
- Calibration facility directly at ControlCOCKPIT
for three freely selectable temperature values
- Programme stored in case of power failure
- Incl. works calibration certificate for +160°C
TEXTURED STAINLESS STEEL CASING
- Fully insulated stainless steel door with 2-point
locking (compression door lock)
- Rear zinc-plated steel
INTERIOR-HEATING CONCEPT
- Easy-to-clean interior,made of stainless
steel,reinforced by deep drawn ribbing with
integrated and protected large-area heating on
four sides
- 1 stainless steel grid
TEMPERATURE RANGE
- Up to +300°C
VOLTAGE/POWER RATING
- 230 V (+/- 10%), 50/60 Hz
20
Water Distiller
- Good distillate quality, conductivity approx. 2,3
μs / cm at 25 °C
- Heating element made of stainless steel,
material no. 1.4876
- Thermostatic low water cut-off, to protect the
heating element in case of low water
- Energy-saving through distillation of the
heated cooling water
- Degassing of carbon dioxide through vent in
the top
- Evaporator with baffle is easily accessible by
lifting the lids. Material: stainless steel,
material no. 1.4301
- Storage tank for distillate accepts double the
hourly capacity of the unit. Material: stainless
steel, material no. 1.4301
- Condenser (cooling coil) in the storage tank,
easily exchangeable. Material: stainless steel,
material no. 1.4301
- Water supply through a built-in solenoid valve
with connection for water pressure hose 1/2
inch (inner Ø 12,7 mm)
- Cooling water pressure required: > 3 bar to
max. 7 bar. After switching on the main switch
the solenoid valve opens the water supply and
closes it once the storage tank is full, thus
avoiding unnecessary waste of water
- Cooling water outlet with hose connection 3/4
inch (inner Ø 19 mm). Water that has not been
condensed flows off through the cooling water
outlet
- Distillate withdrawal through the drain cock on
the front of the unit. The drain cock can be
opened in either continuous or touch position
- An electronic level switch switches the still off
when the storage tank is full and restarts it
automatically when distillate is withdrawn
21
Precision Thermometer
FEATURES
- Professional thermometer with high accuracy
& 0,01 resolution.
PT 100 probe input cooperate with an
0.00385 alpha coefficient, meet DIN IEC 751.
- Cooperate with 4 wires Pt 100 ohm probe,
high precision.
- Wide range display from -199,99 to 850 °C.
- Build in °C & °F select button on the front
panel.
- Build in 0,01& 0,1 select switch on the front
panel.
- RS 232 computer serial interface.
- Super large LCD with unit display, easy
readout.
- Data hold function to store the desired value.
- Memory function to record the maximum &
-
minimum reading with recall.
Built-in low battery indicator.
Optional carrying cases are available.
PROBE TYPE
Platinum PT 100 ohm
FUNCTIONS
°C, °F, 0,01, 0,1 Data hold.
RESOLUTION
0.01 °C /0.1 °C, 0.02 °F /0.1 °F.
CIRCUIT
Use the software to make linearity correction
instead the traditional hardware circuit
PROBE INPUT SOCKET
DIN 4 pin socket
SAMPLING TIME
Approx. 0,4 second
DATA OUTPUT
RS232 PC serial interface
OPERATING TEMPERATURE
0 to 50 °C (32 to 122 °F).
OPERATING HUMIDITY
Less than 80% RH
OPTIONAL ACCESORIES
Carying case, PT 100 probe, RS232 cable, USB
cable application software
Electrical Specifications (23±5 0C)
1. °C
: - Range -199,99 to 199,99 0C.
- Resolution 0,01 0C
- Range 200,0 to 850,0 0C.
- Resolution 0,1 0C
.
2. °F
: - Range -199,99 to 392,00 0F.
- Resolution 0,01 0F
- Range 392,0 to 1.562,0 0F.
- Resolution 0,1 0F
22
5 in 1 Meter
FEATURES
- 5 in 1 professional measuring instrument:
Anemometer, Hygrometer, Type K
Thermometer, Light meter, Sound level meter.
- Anemometer use low-friction ball bearing
mounted wheel design provides high
accuracy.
- Light meter use exclusive photo diode and
colorcorrection filter light sensor, spectrum
meets C.I.E. photopic.
- Type K thermometer use standard type K
(NiCr-NiAl) thermocouple input jack suitable
for all kinds of type K probe.
- Humidity meter use high precision humidity
sensor with fast response time.
- Sound level meter's characteristic is simulated
as " Human Ear Listing" response, used the "
-
-
A " frequency weighting and " Fast " time
weighting to meet IEC 61672 class 2.
Sound level meter can cooperate the external
94 dB sound calibrator and just press the front
buttons to make the calibration
Built- in microprocessor circuit assures
excellent performance and accuracy.
Concise and compact buttons arrangement,
easy operation.
Memorize the maximum and minimum value
with recall.
Hold function to freeze the current reading
value.
0
C /0F detection by pressing button on the
front panel.
Lux/Feet-candle selection by pressing front
button.
Air velocity measuring units selection by
pressing button on the front panel for five
kinds of units.
Multi channel display for relative humidity and
temperature measured values or air velocity
and temperature measured values at the
same time.
Zero button design makes light meter
calibration.
Rough housing case suitable for handling
with one hand,
RS232/USB computer data bus
GENERAL SPESIFICATIONS
MEASUREMENT
5 in 1 : Anemometer ( Air velocity + Temp. )
Humidity ( %RH + Temp. )
Light
Thermometer ( type K )
Sound level
OPERATING HUMIDITY
Max. 80% RH.
OPERATING TEMPERATURE
0 to 50°C (32 to 122 °F).
DATA OUTPUT
RS232/USB PC serial interface.
- Connect the optional RS232 cable UPCB-02
will get the RS232 plug.
- Connect the optional USB cable USB-01 will
get the USB plug.
OPTIONAL ACCESORIES
Carying case, Type K Temperature probe, Sound
Calibrator/SC-941, USB Cable/USB-01, RS232
cable/UPCB-02, Data Acquisition Software, SWU801-WIN, AC to DC power adapter.
23
Power Analyzer
FEATURES
- Multi-functions : WATT, VA, Whr, COS θ
(Power factor ), ACV, ACA, DCV, DCA, Hz,
ohm.
- True AC power( Watt ) & apparent power (VA)
measurement.
- True rms display for ACV, ACA.
- 0.1 W resolution ( < 1000 W ), high precision
an high resolution in the low wat range, good
performance for low power LED lamp watt
measurement.
- Supper large LCD, easy to read-out, display
the Watt, Power factor, Voltage & Current
value at the same time.
- Accept different kinds current input signal as
direct input, inductive clamp probe or CT (
current transformer ).
- Auto range.
- Built-in peak hold & data hold function.
- Watt & VA measurement with Hi, low alarm
setting capability.
- RS-232 output interface.
- Exclusive custom exclusive design LSI circuit,
provides high accuracy, reliability and
durability.
- Built-in over input indication.
- Power supply by batteries or AC to DC
adapter.
- Built-in low battery indicator .
- Durable bench type housing plastic case with
carrying handle.
GENERAL SPECIFICATIONS
Multi-display unit, show Volt, Ampere, Watt,
Power factor or Hz at same time.
- Measurement : WATT, VA, Whr,, Power factor,
ACV, ACA, DCV, DCA, Hz, ohm.
- Zero Adjustment : Whr: External adjustment by
push button.
DCV, ACV, DCA, ACA : Automatic
adjustment.
- Polarity : Automatic switching, "-" indicates
reverse polarity.
- Current input mode : Direct input, inductive clamp
probe or CT.
- Data Output : RS232 serial interface.
- Sampling Time : W, VA, ACA, ACV, COS θ , Hz :
Approx. 1.5 Sec.
DCV, DCA, OHM : Approx. 1 Sec.
- Operating Temp. : 0 to 50 °C (32 to 122 °F).
- Operating Humidity : Less than 80 % R.H..
- Power Consumption : Approx. DC 55 mA
-
ELECTRICAL SPECIFICATIONS
- Watt (AC, true power), current mode from
direct input
Range : 6.000 Watt
Resolution : 0,1 Watt (< 1.000W) 1 Watt (≥
1000W)
Accuracy ± (1,5% + 5d)
-
Watt (AC, true power),
current input cooperate with inductive
probe or CT
Range : 0,1 to 999,9 Watt Resolution : 0,1
Watt
Range : 9.999 Watt Resolution : 1 Watt
Range : 99,99 KW Resolution 0,01 KW
Range : 999,9 KW Resolution 0,1 KW
-
VA (AC, apparent power),
current mode from direct input
Range : 99,99 VA Resolution : 0,01 VA
Range : 999,9 VA Resolution : 0,1 VA
Range : 9,999 VA Resolution 1 VA
Accuracy : ± (2% + 2d)
-
POWER FACTOR
current mode from direct input only
Range : 0,01 to 1,00 Resolution : 0,01
Accuracy : ± (1,5% + 2d)
-
AC VOLTAGE (true rms), DC VOLTAGE
Range : 0,1 V to 299,9 V Resolution : 0,1 V
Range : 300 V to 600 V Resolution : 1 V
Accuracy : DCV : ± ( 1 % + 1d )
ACV (≤10 V) : ± ( 1 % + 7d )
ACV (11 V to 100 V) : ± ( 1 % +
5d )
ACV (Others) : ± ( 1 % + 1d )
-
AC CURRENT (true rms), DC CURRENT
current mode from direct input
- ACA
Range : 0,05 A to 1,999 A, Resolution : 1
mA, Accuracy : ± ( 1 % + 3d )
Range : 2,00 A to 10,00 A, Resolution : 10
mA, Accuracy : ± ( 1 % + 3d )
- DCA
Range : 0,01 A to 10,00 A, Resolution : 10
mA, Accuracy : ± ( 1 % + 1d )
-
AC CURRENT (true rms), DC CURRENT
current mode from inductive probe
- ACA
Range : < 20 A, Resolution : 0,01 A,
Range : 20 A to 199,9 A, Resolution : 0,1
A
Range : 200 A to 1.000 A, Resolution : 1 A
- DCA
Range : 1000 A, Resolution : 1 A,
Accuracy : Meter voltage range accuracy
plus Inductive Probe’s accuracy
ACA is true rms
-
AC CURRENT
Current mode from CT (current
transformer)
Range : CT 100/5A, 0,1 to 200 A Resolution :
0,01 A, < 20 A, 0,1 A, ≥ 20 A
Range : CT 1.000/5A, 1 to 2.000 A Resolution
: 0,1 A, < 200 A, 1 A, ≥ 200 A
Accuracy : Meter current range accuracy plus
CT (current transformer) accuracy.
ACA is true rms
-
Watt Hour
current from direct input
Range : 0,001 Whr to 9,999 Whr Resolution :
0,001 Whr
Range : 10,00 Whr to 99,99 Whr Resolution :
0,01 Whr
Range : 100,0 Whr to 999,9 Whr Resolution :
0,1 Whr
Range : 1.000 Whr to 9999 Whr Resolution :
1 Whr
Range : 10 KWhr to 99,99 KWhr Resolution :
10 Whr
Range : 100 KWhr to 999,9 KWhr Resolution :
100 Whr
Range : 1.000 KWhr to 9999 KWhr
Resolution : 1 KWhr
- When Watt Hour value over 9999 K Whr,
the Display value will reset to 0000 K Whr,
then count up again.
- Accuracy & other specification requirement
same as " Watt " range exactly
-
OHMS
Range : 9.999 ohm Resolution : 1 ohm
Range : 19,99 Kohm Resolution : 1 ohm
Accuracy : ± (1% + 1d)
- Auto range.
- Overload protection “ Max. AC/DC 300V.
24
CO2 Meter
FEATURES
- NDIR method principal for CO2 ( Carbon
dioxide ) measurement, available for long term
operation.
- High repeatability and high accuracy.
- Two probes, one is for CO2/Temp.
measurement, the other probe is for
Humidity/Temp./Dew point measurement.
-
Separate probe, easy operation and
convenient for remote measurement.
CO2 function with alarm setting.
Humidity measurement with fast response
time.
Large S-TN LCD, high contrast, easy readout.
Data hold function for freezing the desired
value on display.
Records Maximum and Minimum readings
with Recall.
RS232/USB computer interface.
Microprocessor circuit assures maximum
possible accuracy, provides special functions
and features.
Heavy duty & compact housing with hard
carrying case, designed for easy carry out &
operation.
Auto shut off is available to save battery life.
Power supply from batteries or DC 9V adapter
in.
GENERAL SPESIFICATIONS
CIRCUIT
Custom one-chip of microprocessor LSI circuit.
MEASUREMENT
CO2 ( Carbon dioxide ), Temperature, Humidity
UNIT
CO2 : ppm
Humidity : % RH
Dew point : °C, °F
Temperature : °C, °F
DATA OUTPUT
RS232/USB PC serial interface.
- Connect the optional RS232 cable UPCB-02
will get the RS232 plug.
- Connect the optional USB cable USB-01 will
get the USB plug.
OPTIONAL ACCESORIES
RS232 cable/UPCB-02,
USB cable, USB-01
Data Acquisition Software, SW-U801-WIN
ELECTRICAL SPECIFICATIONS (23 ± 5 °C)
- CO2 (Carbon dioxide)
Range : 0 to 4.000 Watt
Resolution : 1 ppm
Accuracy : ± 40 ppm * ≤ 1.000 ppm
± 5% of reading * > 1.000 ppm ≤
3.000 ppm
± 250 ppm typically * > 3.000 ppm,
reference only
Repeatibility : ± 20 ppm * ≤ 3.000 ppm
-
Temperature
Range : 0 °C to 50 °C, 32 °F to 122 °F
Resolution : 0,1 degree
Accuracy : °C – 0,8 °C, °F – 1,5 °F
-
Humidity/ Temperature/ Dew point
Humidity
Range : 10% to 95 % R.H.
Resolution : 0,1 % R.H.
Accuracy : ≥ 70 % : ± (3% reading + 1% R.H.)
< 70 % R.H. : ± 3 % R.H.
-
Temperature
Range : - 0 to 50 0C, 32 to 122 0F
- Resolution 0,1 0
- Accuracy : °C – 0,8 °C, °F – 1,5 °F.
-
Dew Point
1. °C
: - Range -25,3 to 48,9 0C.
- Resolution 0,1 0C
.
2. °F
25
Environment Meter
: - Range -13,5 to 120,1 0F.
- Resolution 0,1 0F
FEATURES
* 11 in 1 professional environmen tinstruments:
1.
Airvelocty/Temp., 2. Humidity/Temp., 3.
UV Light
4. Barometer,5. CFM,CMM,6. Dewpoint,
7. Wet bulb, 8. Wind chill, 9.Heat index,
10. Altitude, 11. PT 1000 ohm Temp.
(optional)
- Tiny bone shape with light weight and small
size case design are suitable for handling
with one hand.
- Wristlet design provides extra protection to
the instrument especially for user one hand
operation.
- Low-friction ball bearing mounted wheel
design provides high accuracy at high and
low air velocity
- UV sensor structure The exclusive UV
photo sensor with the cosine correction
filter.
- High precision humidity sensor with fast
response time.
- Build in baro sensor for the atomsphere
value and altitude measurement precisely.
- Optional PT 1000 ohm Temp.probe for the
precision Temp. measurement.
- Built in microprocessor circuit assures
excellent performance and accuracy
- Concise and compact buttons arrangement,
easy operation
- Memorize the maximum and minimum
-
value with recall.
℃/℉ detection by pressing button on the
front panel.
Hold function to freeze the current reading
value.
GENERAL SPECIFICATIONS
- Display : 8 mm LCD display
- Measurement : Airvelocty/Temp,
Humidity/Temp., UVLight, Barometer,
CFM,CMM, Dewpoint, Wetbulb, Windchill,
Heatindex, Altitude, PT 1000 ohm
Temp.(optional)
Samarinda,
Maret 2015
Kuasa Pengguna Anggaran,
Ttd
Ir. H. ERWINSYAH, M.Si.
NIP. 19630805 199212 1 002