16 - Custom Bikes by Mike

Transcription

Sheetmetal
16
16
For the Dealer Nearest You, Call: 800-729-3332
Paul Yaffe Front Fenders
‘OTH’ Front Fenders
by Paul Yaffe Originals
‘Wild’ Front Fender
The name of this radical front fender says it all... “Wild”.
This precision cut fender will make a bold statement on
any custom. Spun from 12-gauge steel (the strongest in
the industry) and available to fit Wide Glide® or Deuce™
front ends. This fender is intended for use on 21" wheels
and is shipped raw and ready for drilling and paint.
Measures 43/4"-wide. The only “ONE PIECE” fender,
no welds, no warpage, lazer cut... perfect every time!
600068 For Wide Glide® mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$525.99
600078 For Deuce™ mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$525.99
Best know for the term “Off The Hook”. Fenders are
spun from 12-gauge, cold rolled steel and then laser cut.
Come in a paint-ready finish and undrilled for custom tire
clearance. Fit 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
06556 Fits Deuce™ model fork legs (shown)
06557 Fits Wide Glide® model fork legs
Note: Spacers are required for front fenders.
‘DEI’ Front Fender
‘Hi-5’ Front Fenders
Uniquely styled and hand-finished for outstanding quality.
Available in Wide Glide® or Deuce™ mounting styles and are
spun from 12-gauge steel. Shipped raw and ready for drilling,
body and paint. The only “ONE PIECE” fenders, no welds, no
warpage, lazer cut... perfect every time!
600077 For Deuce™ mounting style . . . . . . . . . . . . . . . . . .$495.99
600081 For Wide Glide® mounting style . . . . . . . . . . . . . .$495.99
The latest and greatest designer fender series
is aimed at Fat Boy®, Heritage Softail® and
Touring models that are running 16" or 18"
front wheels with up to 130 tires. This fluidly
shaped front fender measures 61/2"-wide and is
shipped raw and ready for body and paint. The only “ONE PIECE” fender,
600067 ‘DEI’ front fender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
Sheetmetal
16
‘Thicker’ Front Fender
‘Thinny’ Front Fenders
Spun from 12-gauge, cold rolled steel and then laser
cut to a slim contemporary shape. Has a perfect look
for today’s modern customs. Fit 21" wheels. Comes
undrilled and ready-to-paint. . . . . . . . . . . . . . . . . .$499.99
06558 Fits Deuce™ model fork legs
Classic full sidewall front thicky fender has become
wider to accommodate Metzler’s new 120 x 21" front tire.
Added 3/4" to the width and named it "Thicker". Spun
from the strongest steel in the industry this 12-gauger
is available in Wide Glide® or Deuce™ mount styles and is
shipped raw and ready for drilling, body and paint.
Measure 51/2"-wide. The only "ONE PIECE" fender,
600070 For Deuce™ mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$495.99
600080 For Wide Glide® mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$495.99
16.02
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Paul Yaffe Front & Rear Fenders
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
‘Talon’ Front Fenders
Unique fenders are spun from 12-gauge, cold rolled
steel for unparalleled strength and rigidity. Comes
undrilled so you can choose tire clearance. Ready-topaint. Requires spacing. . . . . . . . . . . . . . . . . . . . . . .$499.99
06554 Fits Deuce™ model fork legs (shown)
‘Thicker U-Duit’ Front Fender by Paul Yaffe Originals
Want a custom fender to wrap around Metzler’s 120 x 21" wide front tire?
This full 1/2 spinning is the perfect canvas to create your own masterpiece.
Spun from 12-gauge steel, this fender blank measures 51/2"-wide and is
shipped raw, ready for shaping, drilling and paint. The only “ONE PIECE”
fender, no welds, no warpage, lazer cut... perfect every time! . . . . . . .$495.99
600071 51/2"-wide ‘Thicker U-Duit’ front fender
Hand
Controls
Lighting
Note: Spacers are required.
Electrical
Exhaust
Intake
‘Thicky’ Front Fender by Paul Yaffe Originals
• Features heavy sidewalls that allow full tire coverage and added surface
area for elaborate paint designs
• Made of 12-gauge steel
• Available for Dyna Wide Glide® or Deuce™ mounting applications
• Sold each
Engine
Roadster Fender Kit by Paul Yaffe Originals
“Bolt-On” fender drips with style. Rolled from 12-gauge steel then split
and wedged so it hugs the rear tire. CNC-machined struts are welded to
the fender, forming a perfect arc. Gusseted and metal finished so that it is
ready to bolt-on and paint. Requires custom seat work. . . . . . . . . . .$1,245.00
06553 Fits Paul Yaffe Roadster frame and custom applications
Fits Front Ends on all Dyna Wide Glide® Models
600002 Fits 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
600004 Fits 18" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
Gaskets
Tranny
& Clutch
Fits Front Ends on all Softail® Deuce™ Models
600003 Fits 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Chopper Fender Kits by Paul Yaffe Originals
‘U-Duit’ Front Fender by Paul Yaffe Originals
Unique fender is made of 12-gauge steel for unparalleled strength and
rigidity. Made for 21" wheels and all styles of fork legs. . . . . . . . . . . . .$499.99
06560 Fits custom applications
These fender kits are sure to get a loud and popular response. Each kit
includes one Fatty 85 or Fatty 105 fender with swingarm and strut bungs
welded in place, two arched support struts with mount bungs welded on,
two weld-on bungs for strut mounting and two-weld on plates for fender
mounting. These kits are intended for use with frames that utilize a 200 or
250-series tire. Fenders are made of 12-gauge steel, measure 8.5" or 10.5"wide and are shipped raw and ready for install and paint. Welding is
required for bungs. The only “ONE PIECE” fenders, no welds, no warpage,
lazer cut... perfect every time!
600059 Kit 85 for 200-series tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$788.99
600060 Kit 105 for 250-series tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$788.99
16.03
Sheetmetal
General
Cross
Reference
Paul Yaffe Rear Fenders
‘Spike’ Designer Rear Fender by Paul Yaffe Originals
Taken from Paul Yaffe’s “Designer Fender Series”, the ‘Spike’ rear fender
will make your jaw drop. Features two convex arches that meet centered to
create a dramatic spike. This mild steel 12-gauge spinning is available in a
101/2"-width. Hand finished and shipped raw and ready for body and paint.
An absolute pleasure to work with in the fab shop. The only “ONE PIECE”
600063 101/2"-wide ‘Spike’ rear fender
‘VQ’ Designer Rear Fender by Paul Yaffe Originals
The ‘Sho-Me’ fender features one large radius that completely exposes and
shows off your great looking wide rear tire. This mild steel 12-gauge spinning is available in a 101/2"-width and is hand finished and shipped raw
ready for custom body and paint. The only “ONE PIECE” fender, no welds,
no warpage, lazer cut... perfect every time! . . . . . . . . . . . . . . . . . . . . . . . .$550.99
600066 101/2"-wide ‘Sho-Me’ rear fender
‘Pro-Street’ Rear Fenders for Softail® Models
Unique fenders are made of 12-gauge steel for unparalleled strength and
rigidity. For use with 230, 240 and 250-series rear tires. Perfect for showing
off those fat tires. Available in 9" or 11" widths. Require custom fender
struts. Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
06549 Measures 11"-wide
Sheetmetal
This design features two convex arches that meet centered to create three
dramatic points. This mild steel 12-gauge spinning is available in a 101/2"width and is hand finished and shipped raw ready for body and paint.
Fender is absolutely the strongest in the industry! The only “ONE PIECE”
600065 101/2"-wide ‘VQ’ rear fender
‘Sho-Me’ Designer Rear Fender
16
‘Hi-5’ Designer Rear Fender by Paul Yaffe Originals
This design features two side arches and two face arches which create a
five point rear edge hence the origin of the name. This mild steel 12-gauge
spinning is available in a 101/2"-width. Hand finished and shipped raw for
body and paint. The only “ONE PIECE” fender, no welds, no warpage, lazer
cut... perfect every time! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$550.99
600064 101/2"-wide ‘Hi-5’ rear fender
16.04
Paul Yaffe Rear Fenders
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
‘Fatty 125’ Rear Fender
One of the most popular fenders by
Paul Yaffe yet! Now available 2"-wider
for a full 121/2". A perfect match for the
Metzler 280 rear tire. Spun from 12-gauge
steel and shipped raw, ready for install, body
and paint. The only “ONE PIECE” fender, no welds,
no warpage, lazer cut... perfect every time! . . . . . . . . . . . . . . . . . . . . . . . .$475.99
600061 121/2"-wide ‘Fatty 125’ rear fender
Hand
Controls
‘U-Duit’ Rigid Rear Fenders by Paul Yaffe Originals
rigidity. For use with 230, 240 and 250-series rear tires. Requires spacing.
Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
06547 Measures 101/2"-wide
Lighting
Electrical
Exhaust
Intake
Engine
‘Fatty’ Rigid Rear Fenders by Paul Yaffe Originals
Unique fenders are made of 12-gauge steel for unparalleled strength
and rigidity. Perfect for rigid applications or swingarm mounted Softail®
applications. Made for wide tire rigid frames. 101/2"-wide fender fits
230, 240 and 250-series rear tires. 81/2"-wide fender fits 200-series tires.
Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
Gaskets
‘Fatty U-Duit’ by Paul Yaffe Originals
Tires keep getting fatter, so do the fenders to fit them. This 121/2"-wide
rear fender is blank for Metzler’s latest 280 rear tire. This 12-gauge steel
unit is the perfect canvas for creating any fender style that you can dream
up, and is made of the strongest steel in the industry. The only “ONE PIECE”
fender, no welds, no warpage, lazer cut... perfect every time! Shipped raw
and ready for shape, install, body and paint... U Duit yourself! . . . . . .$446.99
600062 121/2"-wide ‘Fatty U-Duit’
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
The ‘Shadow 17’ Rear Fender
Finally, a rear fender spun especially for
low profile 17" wheels.
• Made of 12 gauge steel for
maximum durability
• Radially welded for extra stability
• Perfect laser precision cut
• Fits rigid frames only
600005 Measures 81/2"-wide . . . . . . . . . .$499.99
‘U-Duit Pro-Street’ Rear Fenders for Softail® Models
rigidity. 11"-wide fender fits 230, 240 and 250-series rear tires. 9"-wide
fender fits 200-series tires. Blank custom rear fender requires custom
fender struts. Fits custom applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
16.05
Sheetmetal
General
Cross
Reference
Jesse James Fenders
Roller
Tombstone
Steeler
’S.W.P.’ Custom Front Fenders
by Jesse James
Heavy-gauge steel fenders designed for custom
applications. Be sure to check installation and
fit before painting.
08695 43/4"-wide . . . . . . . . . . . . . . . . . . . . . .$217.99
08696 6"-wide . . . . . . . . . . . . . . . . . . . . . . . .$199.99
Optional License
Plate Frame
Note: CC #08695 is designed for low-profile 18" tires, standard profile 19" tires, and low profile 21" tires with an outside diameter of 28" or less.
Outlaw
Smooth Outlaw
Custom Rear Fenders by Jesse James
Wide to super-wide steel rear fenders are designed for custom applications. Be sure to check installation and fit before painting.
‘Steeler’
13785 71/4"-wide . . . . . . . . . . . . . . . . . . . .$305.19
13786 81/2"-wide . . . . . . . . . . . . . . . . . . . .$287.69
13787 9"-wide . . . . . . . . . . . . . . . . . . . . . . .$287.69
13528 9" with license frame . . . . . . . . . .$389.99
13377
Jesse James Rear Fenders
for Santee® Rigid Frames
Plain steel straps support the rear fender on
your wide-tired Santee-framed chopper. Plain
versions are also available.
Sheetmetal
For Santee® 180-Series Rigid Frames
13377 81/2"-wide rear fender with
plain steel strap supports . . . . . . .$308.19
16955 81/2"-wide without support . . . . .$305.09
For Santee® 200-Series Rigid Frames
16956 9"-wide without support . . . . . . .$313.99
13530
16
13531
16.06
‘Tombstone’
13788 71/4"-wide . . . . . . . . . . . . . . . . . . . .$287.69
13789 81/2"-wide . . . . . . . . . . . . . . . . . . . .$287.69
16957 81/2" with ‘Hi-Ball’ taillight . . . .$644.99
13790 9"-wide . . . . . . . . . . . . . . . . . . . . . . .$287.69
13529 9" with license frame . . . . . . . . . .$400.69
‘Roller’
13791 71/4"-wide . . . . . . . . . . . . . . . . . . . .$305.19
13792 81/2"-wide . . . . . . . . . . . . . . . . . . . .$287.69
13793 9"-wide . . . . . . . . . . . . . . . . . . . . . . .$287.69
‘Outlaw’
11962 71/4"-wide . . . . . . . . . . . . . . . . . . . .$279.99
‘Smooth Outlaw’
16963 81/2" with ‘Hi-Ball’ taillight . . . .$390.99
’OneTonHo’ and ’TwoTonHo’ Rear
Custom Fenders by Jesse James
Designed specifically for wide rigid frames.
Fenders feature internal wiring loom and a belt
cutout. The ‘TwoTonHo’ has built-in fender
supports pre-drilled for turn signals while the
‘OneTonHo’ has no supports.
13530 9"-wide ‘TwoTonHo’ . . . . . . . . . . . .$326.89
13531 9"-wide ‘OneTonHo’ . . . . . . . . . . . .$326.99
13526 81/2"-wide ‘OneTonHo’ . . . . . . . . .$308.19
13520 71/2"-wide ‘OneTonHo’ . . . . . . . . .$308.19
For Santee 200-Series Rigid Frames
08680 9"-wide custom ‘OneTonHo’ . . . .$308.19
95161 Santee fender support for CC #08680
fender. Use with 5/16"-18 countersunk
screws . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.99
Jesse James Fenders
Genuine West Coast Choppers Steel Fenders
by Jesse James
Construction starts with two pieces of heavy-gauge steel which are formed
and welded into shape. Steel tubes are then welded to the underside to
help keep your wiring looking clean and out of the way. Finally, the fender
is sanded and finished out, making it primer ready. Jesse’s fenders are recognized and used by many of the top bike builders for their unmistakable
style and superior quality.
Apparel
Bike Kits
& Trailers
Seats
& Bags
Roller
Foot
Controls
Forty
Tombstone
’Curbfeeler’ Custom Rear Fenders by Jesse James
Hand
Controls
Heavy-gauge steel fenders designed for custom applications. Each fender
is hand-formed and precision welded. Be sure to check installation and fit
before painting.
08685 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
08686 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
‘Smooth
Outlaw’
‘Steeler’
‘Two Eight’
Lighting
Electrical
Custom Front Fenders by Jesse James
Steel front fenders designed for custom applications. Be sure to check
installation and fit before painting.
Exhaust
43/4"-Wide Fenders
13794 ‘Forty’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.49
13795 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$218.09
13796 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.49
Intake
Note: When installed in conjunction with 21" front wheels, only Dunlop and Metzler
low-profile tires are recommended due to clearance issues.
6"-Wide Fenders
11526 ‘Tombstone’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.49
11531 ‘Roller’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.99
Engine
Gaskets
Tranny
& Clutch
Ultra-Wide Custom Fenders by Jesse James
Made of 18-gauge steel, these 101/2"-wide fenders fit our ‘Doss 230’ frames
(CC #’s 95251 and 95252) when using Avon 230-series tires. Undrilled for
custom applications.
16951 ‘Two Eight’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.99
13072 ‘Steeler’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$308.19
13073 ‘Smooth Outlaw’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$326.99
Driveline
11523
Wheels,
Tires
& Brakes
Steel Fenders by Jesse James
These smooth flowing, custom-styled steel fenders are made from 18gauge steel and recognized and used by many of the top bike builders,
including Donnie Smith, for their unmistakable style and superior quality.
Frames
Note: All fenders should be checked for clearance before drilling mounting holes.
‘Steeler’ Front Fenders
Super-smooth radiused bends without steps and a low-profile are the mark
of the these fenders. Each heavy-duty fender is non-drilled to permit maximum custom positioning.
11523 43/4"-wide for custom applications . . . . . . . . . . . . . . . . . . . . . .$217.99
11524 6"-wide for FL and FXST models . . . . . . . . . . . . . . . . . . . . . . . .$205.49
Forks
& Shocks
Sheetmetal
General
16.07
Cross
Reference
Jesse James Fenders
‘Diablo’ Custom Rear
Fender by Jesse James
Styled to draw attention anywhere
you go. Made of 18-gauge steel
and comes undrilled for all types
of custom applications. . . .$250.69
08694 71/4"-wide
‘Easy 6’ Front Fender
by Jesse James
Custom 6"-wide undrilled fender. Made of
heavy-duty 18-gauge steel. Great for running
wide front tires. . . . . . . . . . . . . . . . . . . . . . . . .$205.49
13071 Fits Wide Glide® front ends
’Jaialai’ Custom Front Fenders
by Jesse James
Heavy-gauge steel fender designed for custom
applications. Each fender is hand-formed and
precision-welded. Be sure to check installation
and fit before painting.
08697 43/4"-wide . . . . . . . . . . . . . . . . . . . . . .$205.49
‘Diablo’ Custom Front Fenders
by Jesse James
’Curbfeeler’ Custom Front Fender
by Jesse James
Styled to draw attention anywhere you go.
Made of 18-gauge steel and come undrilled
for all types of custom applications.
16952 43/4"-wide . . . . . . . . . . . . . . . . . . . . . .$217.99
08693 6"-wide . . . . . . . . . . . . . . . . . . . . . . . .$205.49
Heavy-gauge steel fender designed for custom
applications. Be sure to check installation and fit
before painting. . . . . . . . . . . . . . . . . . . . . . . . .$217.99
08683 6"-wide
13162
13159
Sheetmetal
13167
16
13166
13164
13170
Custom Steel Fenders by Jesse James
‘Mama Jama’ Steel Fenders by Jesse James
The only thing more creative than the names for Jesse James’ fenders is the design itself. A set of these custom fit at just the right
angle and some sharp paint is about all that’s needed for a fullblown custom bike. Holy Mama Jama!
Rear Fenders
13167 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$287.69
13169 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
Front Fenders
13170 43/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$217.99
13171 6"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.49
The durability of heavy-gauge.steel with a great custom look. ‘Classic’ fenders fit the
full radius of the tire for that ‘fat’ look, while the ‘Gunslinger’ is a bit more compact.
Widths for most stock front and rear applications as well as extra-wide rear versions. For custom installations fenders are not pre-drilled. Be sure to check installation and fit before painting.
Classic
Gunslinger
13159
13160
n/a
n/a
n/a
13161
13162
13163
13164
13533
13154
13527
13165
13166
71/4"-wide rear . . . . . . . . . . . . . . . .$287.69
81/2"-wide rear . . . . . . . . . . . . . . . .$279.99
81/2"-wide with license frame . .$400.69
9"-wide rear . . . . . . . . . . . . . . . . . .$279.99
9"-wide with license frame . . . .$400.69
43/4"-wide front . . . . . . . . . . . . . . .$199.99
6"-wide front . . . . . . . . . . . . . . . . .$199.99
Note: CC #13170 is designed for low-profile 18" tires, standard profile 19" tires, and
lowprofile 21" tires with an outside diameter of 28" or less.
16.08
Optional
License Plate
Frame
Ness & Chica Fenders
Apparel
Ness® Frontdragger Fenders
Styled to match ‘Taildragger’ rear fenders.
Constructed of fiberglass with black gelcoat finish,
and available in three widths.
05531 61/4"-wide for 16" to 18" front wheels
on FL Softail® models from 1986
to present . . . . . . . . . . . . . . . . . . . . . .$214.54
05536 63/4"-wide for 16" to 18" front wheels
on most Wide Glide® front ends
(except FL Softail® models) . . . . . .$214.54
05535 Fits 19" or 21" front wheels
on Narrow Glide front ends . . . . .$159.95
Bike Kits
& Trailers
Seats
& Bags
05008
Foot
Controls
Note: Fender mounting bracket shown is not included and must
be custom made.
Hand
Controls
Ness® Taildragger Rear Fenders
05316
These fiberglass fenders are trimmed to fit Softail®
and FXR models for easy installation. Combined
with custom fender struts, wheels and drivetrain
components, the wide fenders facilitate mounting
the super-wide rear tires.
05533 7"-wide for FXR and Softail® models
with stock fender struts . . . . . . . . . . . . .$214.54
05530 8"-wide for Softail® models
with custom fender struts . . . . . . . . . .$214.54
05534 81/2"-wide for Softail® models
with custom fender struts . . . . . . . . . .$214.54
05315 9"-wide for custom frames . . . . . . . . .$214.54
05316 Same as CC #05315 but with recesses for
Cateye taillight and license plate . . . .$214.54
05009
Lighting
Ness Sport Front Fenders
®
The wide skirts of these custom fenders provide
more room for your custom paint job. They’re
made in the U.S.A. from A.B.S. plastic and come
with the mounting holes undrilled ready for
your custom paint job.
05008 Fits Narrow Glide forks
and 19" or 21" wheels . . . . . . . . . . .$49.95
05009 Fits Wide Glide® forks
and 16" wheels . . . . . . . . . . . . . . . . . .$64.95
Electrical
Exhaust
Note: 1997 and newer models require modification
and/or relocation of OEM fuse box
Intake
Engine
240950
Gaskets
240951
Ness® Legacy Front Fender
Stylized versions of the FLST rear fender. The
front fender is a perfect match for the Legacy
rear and gives a classic, sweeping look to the
front of your bike. It is easily fitted to most
Wide Glide® front ends using 16" or 18" front
wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.95
05529 Legacy front fender, 61/2"-wide
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Fender strut not included.
Raised Rib Rear Fenders
by Chica Custom Cycles
Frames
Steel rear fenders with a raised center rib. A unique style that
looks good in many applications. Supplied unpainted and
non-drilled for maximum flexibility in mounting.
240950 5" wide. Fits custom applications . . . . . . . . . .$161.99
240951 6" wide. Fits custom applications . . . . . . . . . .$174.99
240952 7.5" wide. Fits custom applications . . . . . . . . .$192.99
Forks
& Shocks
Ness® Cafe Front Fender
This sleek front Cafe fender is made out of
durable A.B.S. plastic ready for primer and
paint. The mounting holes are undrilled to
permit use on Narrow Glide front forks with
19" or 21" wheels. . . . . . . . . . . . . . . . . . . . . . . .$49.95
05007 Sold each
16.09
Sheetmetal
General
Cross
Reference
Milwaukee Iron Fenders
Trimline
29986
13802
13803
Razors Edge
29985
29989
29984
So Cool
29979
29977
29982
29983
Shark’s Tooth
13801
Razors Edge
29986 Fits FL Softail® models from 1986 to present . . . . . . . .$506.29
29985 Fits FX Softail®, Dyna Wide Glide® and 4-speed
FXWG models (except Springer and Deuce™
models) from 1980 to present . . . . . . . . . . . . . . . . . . . . .$278.49
29987 Fits FLT, FLHT, FLHS and Road King® models
from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29
29984 Fits Sportster®, FX, FXR and Dyna Glide models
with Narrow Glide forks from 1973 to present . . . . .$278.49
So Cool
from 1984 to present (long) . . . . . . . . . . . . . . . . . . . . . . .$506.29
Shark’s Tooth
from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29
29981
Sheetmetal
These designs shows off custom wheels and fork legs without
distraction. Ready for primer, paint or powder coat. 16-gauge
steel fenders are pre-drilled for easy installation.
Trimline
from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29
29978
13800
Custom Front Fenders by Milwaukee Iron
Long Thin Skirt
Showboat
29980 Fits FLSTS models from 1997 to present . . . . . . . . . .$759.44
Thin Skirt
29990 Fits Springer Softail® models (except FLSTS)
from 1988 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29
from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$506.29
29980
Showboat
29974
Long Thin Skirt
29973 Fits FL Softail® models from 1986 to present (long) .$506.29
from 1984 to present (long) . . . . . . . . . . . . . . . . . . . . . . .$506.29
Thin Skirt
29988
16
29990
16.10
Long ‘Slim Jim’
‘Sheriff’
Apparel
‘Flip Flop’
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Short ‘Sabertooth’
Hand
Controls
Medium ‘Sabertooth’
Lighting
Electrical
Long
‘Sabertooth’
Exhaust
Short ‘Slim Jim’ on 4-Speed Frame
Long ‘Slim Jim’ on 4-Speed Frame
Strutless Fenders for Softail® Models by Milwaukee Iron
These fenders have beefy, built-in supports to replace the traditional fender struts. Heavy-gauge, steel supports are blended into the fenders for a great illusion. All fenders require the removal of the frame horns
to which the struts are normally attached.
For Santee® and Daytec™
Custom Frames
For Santee and Original Equipment
Softail® Frames
As many as six different styles for you to choose
from for the most popular wide tire frames on the
market today. These fenders will fit the frames listed
below provided they measure 11"-wide between
the fender strut mounts.
These fenders fit 5-speed Original Equipment
Softail® frames from 1986 thru 1999, as well as
Santee® stock replacement frames that measure
113/4"-wide between the strut mounts. 1997 and
newer models require modification and/or
relocation of the OEM fuse box.
For Standard Daytec™ Street Scene Frames
All of these fenders are 85/8"-wide.
13282 Short ‘Slim Jim’ with 11/4" skirt . . . . .$546.79
13279 Long ‘Slim Jim’ with 11/4" skirt . . . . .$617.69
13287 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.44
06413 Short ‘Sabertooth’ with 2" skirt . . . .$566.99
For Daytec™ Street Scene 103/200 Frames
All of these fenders are 91/8"-wide.
13289 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$607.54
For Santee® Frames
All of these fenders are 85/8"-wide, and have
a 2" skirt.
06415 Short ‘Sabertooth’ . . . . . . . . . . . . . . . . .$617.99
06419 Medium ‘Sabertooth’ . . . . . . . . . . . . . .$607.54
06423 Long ‘Sabertooth’ . . . . . . . . . . . . . . . . .$647.59
‘Sheriff’ on 4-Speed Frame
For Doss 230 Swingarm Frames
Four styles are available to chose from for this popular custom frame. These fenders are 101/2"-wide.
06420 Medium ‘Sabertooth’ with 2" skirt .$769.59
06412 ‘Flip Flop’ with 5" skirt (31"-long) . .$779.69
75/8"-Wide Fenders
13285 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$587.34
85/8"-Wide Fenders
13286 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.44
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Strutless Fenders for 4-Speed
Big Twins by Milwaukee Iron
Milwaukee Iron has moved custom rear design out of
the fabrication shop into the Custom Chrome® catalog with fenders that have beefy, built-in supports
replacing traditional fender struts. Heavy-gauge,
steel supports are blended into the fenders for a
great strutless illusion. They fit all 4-speed FL and FX
swingarm frames (except Softail® models) from 1965
thru 1986.
75/8"-Wide Fenders
29827 Long ‘Slim Jim’ with 3" skirt . . . . . . .$627.79
29824 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$587.34
85/8"-Wide Fenders
29825 ‘Sheriff’ . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.44
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
16.11
Cross
Reference
Milwaukee Iron, Heartland USA Fenders
Milwaukee Iron sheet metal fenders are formed with 14 gauge cold roll
steel tops and 16 gauge laser cut sides. Each is then hand fitted, TIG welded
and detail sanded so it's ready for primer and paint when it arrives.
Designed for a true bolt-on fit that doesn't require modification or
adjustment.
23566
23565
240907
Heartland USA™ Kits
Milwaukee Iron “Sabertooth” Rear Fenders
for Softail® Models
Aggressive custom profile with a choice of 2 inch or 3 inch-wide skirts.
Designed for stock or aftermarket Softail® style frames from 1985 thru 1999
with strut support "horns" removed.
240903 75/8" I.D. wide x 23"-long with 2" skirts. Fits up to 150 tire
on stock width frames with 113/4" frame top width . . . . . . . . .$556.99
on wide drive frames with 113/4" frame top width . . . . . . . . . .$566.99
240905 91/8" I.D. wide x 23"-long with 2" skirts. Fits 200+ tire
on wide drive frames with 113/4" frame top width . . . . . . . . . .$577.19
240908 91/8" I.D. wide x 23"-long with 3" skirts. Fits 200+ tire
Sheetmetal
Heartland USA™ Struts
Use in conjunction with Heartland USA™ 81/2"-wide fenders. Sold in pairs.
23563 Black powder coated 113/4" flat-to-flat struts for
Softail® models from 1986 to present . . . . . . . . . . . . . . . . . . . . . . .$666.49
23564 Chrome billet 113/4" flat-to-flat struts for all
Softail® Deuce™ models from 2000 to present . . . . . . . . . . . . . . .$701.54
240496 Fits 1986 to present FXST, FLST models, (except FXSTD) or aftermarket
Softail® style frames with 113/4” frame top width. Strut support
“horns” must be removed. Use with 81/2" wide fender. . . . . .$697.89
The Bolt-On Cure for Common Softail® Models
by Heartland USA™
Universal
‘Flip Flop’
Custom Rear Fenders
by Milwaukee Iron
Unique hand-crafted steel designs feature laser-cut
panels and careful TIG welding for a flawless seam. Fenders
for factory frames are 7"-wide to fit between stock fender struts.
Medium ‘Slim Jim’ for Rigid Frames
All fenders are 3/16" thick, have a 2"-wide valance, are 42"-long
with left-side cutout for belt or chain.
06408 75/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$378.89
06409 85/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
06410 91/8"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$404.74
06411 101/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$536.69
‘Flip Flop’ Universal Fit
29810 73/4"-wide with tapered skirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$268.34
16.12
Heartland USA™ Fenders
Steel 81/2"-wide fenders will lower your seat for a more modern and stylish
look. Must use with Heartland USA™ fender struts and seats.
23565 ‘Wild Heart’ fender (measures 201/2"-long, 81/2"-wide) . . . . . .$361.29
23566 ‘Heartlander’ fender(measures 28"-long, 81/2"-wide) . . . . . . . .$361.29
Note: You must cut off frame horns in order to use fender struts properly.
‘Slim Jim’
on Rigid Frame
16
Get the look of a longer, lower and wider bike with your Original
Equipment frame. Wide fenders mounted lower on the bike combined
with a frame hugging leather seat turns a stock bike into a custom without
the expense of a new frame. The 81/2"-wide fenders will accept rear tires
up to 180mm in width. Also available for custom frames to give them a
whole new look. Fender, struts and seat sold separately.
This unique three-piece system is
like no other bolt-on product for
Softail® models on the market
today. Consists of chrome billet
curved struts, a specially constructed steel fender and contoured seat.
By moving back the seating position, the design gives Softail® models the low to ground feel and the
look of a classic rigid but with the
comfortable ride and suspension of
a Softail® model. All hardware
included.
Note: Pieces must be purchased separately.
Chrome Billet Curved Struts
28362 Fits Original Equipment 5-speed Softail® frames from 1986 thru
1999. Use with CC #28374 fender and CC #’s 28364 or 28369
seats (frame horns must be removed to use these struts) . . . .$666.49
28373 Fit aftermarket 5-speed frames from 1986 to present using
CC #28374 fender and CC #’s 28378 or 28379 seats . . . . . . . . . .$666.49
8.5" Wide Rear Fender
Will accept up to 180-series tire if desired. For a big tire installation on
an Original Equipment frame, you may either use a one inch belt with a
narrow pulley or use a wide tire conversion kit (CC #’s 95140 or 95139).
28374 For use with Heartland struts (CC #’s 28362 or 28373) and seats
(CC #’s 28379, 28369, 28364 or 28378) . . . . . . . . . . . . . . . . . . . . . .$361.29
Custom Seats
Specially designed seats for use with the Heartland™ struts and fender.
Come in black leather or naugahyde.
Black Leather Seats
28364 Fits Original Equipment frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$361.29
28378 Fits aftermarket frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$361.29
Black Naugahyde Seats
28369 Fits Original Equipment frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
28379 Fits aftermarket frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
Custom Chrome® & ZCB Fenders
Custom Chrome® Universal Fenders,
Fender Brackets and Struts
Apparel
Bike Kits
& Trailers
Universal fenders in three lengths with matching fender brackets
and fender struts. Now you can create your own custom rear fender to match your rear wheel. To mount the fender, choose the
matching wide bracket and the correct length of fender struts
(sold separately).
88342 Fender 83/4"-wide (220mm), long version . . . . . . . . . .$175.95
88343 Fender 83/4"-wide (220mm), medium version . . . . . . .$145.95
88344 Fender 83/4"-wide (220mm), short version . . . . . . . . . .$125.95
88312 Fender 103/4"-wide (270mm), long version . . . . . . . . .$175.95
88313 Fender 103/4"-wide (270mm), medium version . . . . .$145.95
88314 Fender 103/4"-wide (270mm), short version . . . . . . . .$125.95
88389 Fender 111/8"-wide (280mm), long version . . . . . . . . .$175.95
88390 Fender 111/8"-wide (280mm), medium version . . . . .$145.95
88391 Fender 111/8"-wide (280mm), short version . . . . . . . .$125.95
88324 Fender struts, long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95
88325 Fender struts, medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
88326 Fender struts, short . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.95
88327 Fender mounting bracket 83/4"-wide (220mm) . . . . . .$55.95
88328 Fender mounting bracket 103/4" to 111/8"-wide
(270 to 280mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.95
Seats
& Bags
Foot
Controls
Long
Hand
Controls
Lighting
Medium
Electrical
Exhaust
Intake
Short
Engine
Fender Struts
Gaskets
Fender Bracket
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
ZCB Strutless Rear Fender for Dyna Glide
and Sportster® Models
These fenders are designed to be used with a 200-series tires on 51/2"-wide
rims. No modification of swingarm or offset kit is required. Requires the
use of wheels and belt pulleys for 2000 to present models. All Sportster®
fenders require wider swingarms.
86677 Fits all Dyna Glide models from 1991 thru 1998 . . . . . . . . . . . .$1,958.00
86995 Fits all Dyna Glide models from 1999 to present . . . . . . . . . . .$1,202.00
86996 Fender up to 180 rear tires for all Sportster® models from 1988
thru 2003 (wide swingarm required CC #86111 or 86112) . .$1,202.00
86997 Fender up to 210 rear tires for all Sportster® models from 1988
thru 2003 (wide swingarm required CC #86111 or 86112) . .$1,202.00
16.13
Forks
& Shocks
Sheetmetal
General
Cross
Reference
ZCB Fenders
86312
86659
86656
86964
86992
86986
686228
86972
86979
Sheetmetal
Fenders by ZCB
16
‘Bolt-On’ fenders by ZCB. Handmade from steel and pre-drilled to fit all
Softail® models (except Deuce™ models). All fender have integrated struts
and are available in six different styles. Please note our list below for your
unique design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price
Rear Fenders ‘III Flat’ with Integrated Struts
86311 Side-mount fender (220mm wide) with TÜV for Evo- Softail® frames
86656 Side-mount fender (220mm wide) with TÜV for TC 88 Softail® frames
86654 Center-mount fender (220mm wide) for OEM- Softail® frames in conjunction
with aftermarket swingarms
86655 Center-mount fender (260mm wide) for aftermarket Softail® frames
86657 Center-mount fender (260mm wide) for OEM Twin Cam 88® frames
in conjunction with aftermarket swingarms
Rear Fenders ‘III Round’ with Integrated Struts
86960 Side-mount fender up to 210 rear tires with TÜV for Evo- Softail® frames
86961 Side-mount fender up to 210 rear tire with TÜV for TC 88 Softail® frames
86962 Side-mount fender up to 210 rear tire with TÜV for EFI TC 88 Softail® frames
Rear Fenders ‘V3 Flat’ with Integrated Struts
Rear Fenders ‘V3 Round’ with Integrated Struts
Rear Fenders ‘VI2 Flat’ with Integrated Struts
16.14
Rear Fenders ‘VI2 Round’ with Integrated Struts
Rear Fenders ‘VI Flat’ with Integrated Struts (not shown)
Rear Fenders ‘VI Round’ with Integrated Struts
Note: All fenders for Twin Cam 88® models come recessed for the OEM electronic box.
Slotted Front Fenders
86312 Fits FX triple trees with 16" wheels
86658 Fits FL triple trees with 16" wheels
86679 Fits Dyna Glide models with 19" front wheels
‘New-Style’ Front Fenders for Low Profile Tires
86678 Fits Dyna Glide models with 19" front wheels
86659 Fits FX forks with 130/70-16, 130/60-17, 120/60-17, 120/70-17 wheels
86660 Fits FL forks with 130/70-16, 130/60-17,120/60-17, 120/70-17 wheels
86661 Fits FX forks with 130/70-17, 130/80-16, 130/60-18, 120/16-18 wheels
86662 Fits FL forks with 130/70-17, 130/80-16, 130/60-18, 120/60-18 wheels
86663 Fits FX forks with 130/70-18, 120/70-18, 130/90-16, MT 90-16, 130/80-17 wheels
86664 Fits FL forks with 130/70-18, 120/70-18, 130/90-16, MT 90-16,
130/80-17 wheels
86831 Fits FL forks with 130/80-18 wheels
86830 Fits FX forks with 130/80-18 wheels
86998 Adapter kit to install FL front fenders on Deuce™ front forks
Sumax Fenders
Apparel
Fenders by Sumax
Stronger than steel and lighter than fiberglass, Sumax’s unique composite fabrication makes their
fenders light in weight yet ten times stronger than conventional fiberglass. Exclusive ‘radial wrap’
woven fabric, formed over ceramic molds, minimizes shrinkage, ensures correct dimensions and provides superior strength. Undrilled to permit precise fitting, and already primered and ready to paint.
Bike Kits
& Trailers
45509
45553
Seats
& Bags
45503
Foot
Controls
Hand
Controls
45577
45500
‘Loboy Bobbed’ Rear Fenders
by Sumax
Stylish Fat Bob fenders have no recessed areas
for reflector inserts, making them easy to
position and close the gap over the rear tire.
They are undrilled to permit precise fitting,
and already primered and ready to paint. The
71/4"-wide rear fenders are generally used as
stock width replacements for most models.
Wider fenders are for custom applications.
Some versions have an integral license plate
mount.
‘Loboy’ Fenders
The 71/4"-wide rear fenders are generally used as stock
width replacements for most models. Some versions
have a recessed area measuring 73/8" x 41/2" to accept
a license plate with frame.
‘Loboy’ Front Fenders
45500 Fits 39mm Narrow Glide forks . . . . .$122.49
45502 Fits Wide Glide® forks
with 16" front wheels . . . . . . . . . . . . .$132.69
45579
‘Skirted Loboy’ Front Fenders
45503 Fits 61/2" Wide Glide® forks with 16" front wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.69
45553 FL-style Loboy for 61/2" Narrow Glide® forks (with spacers) with 16" wheels . . . . . . . . . . . . . .$173.49
Lighting
Electrical
Exhaust
Without License Plate Mount
45510 Fits Sportster® models with
67/8" mounting width . . . . . . . . . . .$142.89
45509 71/4"-wide . . . . . . . . . . . . . . . . . . . . . .$142.89
45511 81/4"-wide . . . . . . . . . . . . . . . . . . . . . .$146.99
45512 9"-wide . . . . . . . . . . . . . . . . . . . . . . . .$153.09
Intake
With License Plate Mount
45577 9"-wide . . . . . . . . . . . . . . . . . . . . . . . .$177.59
Engine
Rear Fenders
45506 Fits Sportster® model struts with 67/8" mounting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$173.49
45579 71/4"-wide with license plate recess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$187.79
Gaskets
Tranny
& Clutch
45556
45572
45542
45581
Driveline
‘Dagger’ Fenders by Sumax
45575
‘Loboy Sweeper’ Fenders
Three inches shorter than the ‘Street Sweeper’ fenders, the 71/4"-wide
fenders are generally used as stock width replacements.
Front Fender for Wide Glide® Forks
45575 Fits 61/2" Wide Glide® forks with 16" wheels . . . . . . . . . . . . . . . .$175.59
Rear Fenders
45572 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.29
45581 71/4"-wide with license plate recess . . . . . . . . . . . . . . . . . . . . . . . .$224.49
Rounded styling wraps around tire for a sensational look. Designed with long, wide tabs to
simplify mounting.
Front Fenders
45554 Fits 7" Wide Glide® forks
with 21" wheels . . . . . . . . . . . . . . .$132.69
45555 Fits 61/2" Wide Glide® forks
with 16" wheels . . . . . . . . . . . . . . .$142.89
45556 Fits 41/2" Narrow Glide forks
with 21" wheels . . . . . . . . . . . . . . .$132.69
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Rear Fenders
45542 71/4"-wide for stock frames . . . .$173.49
Sheetmetal
General
16.15
Cross
Reference
Sumax & Doss Rocket Fenders
Pro Comp
Pro Comp
‘Smoothee’
45546
‘Pro Sport’ Front Fenders
by Sumax
Sumax ‘Pro Comp’ Rear Fenders
Undrilled to permit precise fitting, and already
primered and ready to paint. The 71/4"-wide
fender is generally used as a stock width
replacement for most models. Wider fenders
are for custom applications.
Pro Comp Fender
67/8" mounting width . . . . . . . . .$153.09
Pro Comp ‘Smoothee’ Fenders
67/8" mounting width . . . . . . . . .$153.09
45551 Fits Dyna Glide models with
7" mounting width . . . . . . . . . . . .$153.09
45530 71/4"-wide . . . . . . . . . . . . . . . . . . . .$153.09
45532 81/4"-wide . . . . . . . . . . . . . . . . . . . .$157.19
45533 9"-wide . . . . . . . . . . . . . . . . . . . . . . .$163.29
‘Dominator’ Rear Fenders
by Sumax
Undrilled to permit precise fitting, and already
primered and ready to paint. The 71/4"-wide
rear fender is generally used as stock width
replacements for most models.
67/8" mounting width . . . . . . . . . . .$142.89
45520 71/4"-wide . . . . . . . . . . . . . . . . . . . . . .$142.89
Sumax’s unique composite fabrication makes
their fenders lightweight yet ten times stronger
than conventional fiberglass. Undrilled, and
ready for primer and paint.
45513 Fits 7" Wide Glide® forks with 18",
19" or 21" wheels . . . . . . . . . . . . . .$112.29
45546 Fits 61/2" Wide Glide® forks with 16"
front wheels . . . . . . . . . . . . . . . . . . . .$134.69
45540
Sumax
‘Street Sweeper’
Front Fender
‘Digger’ Front Fenders by Sumax
Undrilled to permit precise
fitting, and already primered
and ready to paint.
45534 Fits 61/2" Wide Glide® front forks
with 16" wheels . . . . . . . . . . . . . . .$228.59
Lean and mean, yet with a long sweep over the
front tire for a unique look.
45540 Fits 41/2" Narrow Glide forks
with 18", 19" or 21" wheels . . .$122.49
45541 Fits 61/2" Wide Glide® forks with
16" wheel (not shown) . . . . . . . .$132.69
‘Desperado’ Rear Fender
Sheetmetal
You may have noticed it’s simplicity yet distinctive design featured on the ‘Pegasus’ HR3 kit.
This rear fender is truly one of a kind.
• Measures 9"-wide with 400mm-radius
• Especially made for 16" and 18" wheels
• For up to 200 series tires
• Made of raw, heavy 18-gauge steel
699900 Sold each . . . . . . . . . . . . . . . . . . . . . . .$250.99
Doss ‘Rocket’ Rear Fenders
16
• Made of 18 gauge steel
• Matches the customized Rick Doss ‘Rocket’ bike
• Fenders must be drilled and fitted before painting
• All fenders have a 153/4"-radius
46711 Measures 71/4"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.09
46712 Measures 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$305.19
46713 Measures 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
46714 Measures 11"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
16.16
Doss ‘Rocket’ Front Fenders
• Made of 18-gauge steel
• Matches the customized Rick Doss ‘Rocket’ bike
• Fenders must be drilled and fitted before painting
62715 Measures 43/4"-wide with a 153/4"-radius for 21"
wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$182.89
62716 Measures 6"-wide with a 133/8"-radius for 16"
and low-profile 18" tires . . . . . . . . . . . . . . . .$193.99
Front Fenders
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Custom Ducktail Front Fender
Designed for use on Softail®, Dyna Wide Glide®
and 4-speed FXWG models. This fender offers
greater weather protection than the stock unit
and is the perfect fender to use with our
‘Heritage Conversion Kit’ when the stock 21"
wheel is retained. Includes polished die-cast
spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.44
13200 Fits FXST, FXSTC, Dyna Wide Glide®
and 4-speed FXWG models from
1980 to present
Custom Ducktail Front Fender
for Springer Softail® Models
Styled after our other Ducktail front fenders
this steel unit will bolt right on in place of the
Original Equipment fender and provide you
with better weather protection and a more
traditional appearance. Sold unpainted. $109.89
13252 Fits FXSTS Springer Softail® models
from late 1988 thru 1992
Note: This fender will not fit with Original Equipment or
aftermarket highway bars, and will not fit with 16" front
wheels.
Custom Skirted Fender with Flip
Based loosely on the skirted early K model front
fender, this timeless classic has been updated to
fit all 35mm and 39mm front forks from 1973 to
present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.89
13196 Unpainted (53/4" wide)
Note: Fender should not be used on bikes equipped with
highway bars.
FXR Regulator Relocation Bracket
Keeps the fender from contacting the regulator
when the suspension is compressed. A must for
lowered models, and recommended for models
using CC #13196. . . . . . . . . . . . . . . . . . . . . . . . . .$15.59
46204 Fits FXR models from 1982 thru 1999
Lighting
Electrical
Exhaust
Intake
Engine
Springer Front Fender
for Big Twins
Front Fender Conversion Kit
for Springer Models
A custom, shortened front fender for a daring
new look. The fender is made from GFK and
then gel-coated. The fender brackets are made
from billet aluminum, and include all necessary
mounting hardware. . . . . . . . . . . . . . . . . . . . .$476.09
85432 Fits FX Springer Softail® models that have
been converted to 16" front wheels from
1991 to present (will not fit FLSTS models)
PJ
Accurate, faithful reproduction of the original
fender. Complete with braces and fender edge
‘reveal’. Fits all Big Twins from 1937 thru 1948.
26520 Replaces OEM 59000-36
(measures 71/2"-wide) . . . . . . . . . . .$113.14
Colony Front Fender Mounting Kit
Cadmium-plated reproduction of the stock hardware used to mount Springer front fenders on
1936 thru 1948 Big Twins. . . . . . . . . . . . . . . . .$13.99
36105 Complete kit (replaces OEM 59007-50)
Front Fender for Deuce™ Models
• Stock front fender replaces OEM #59876-00
• Available in black powdercoating primer,
ready for paint
Tranny
• Fits Deuce™ models and Deuce™ front end kits & Clutch
from 2000 to present
668500 Unpainted . . . . . . . . . . . . . . . . . . . . . . .$42.92
Driveline
Jim Nasi Custom Front Fenders
Loaded with style that will differentiate your bike from the others.
• Featuring 3 different designs
• Available in 43/4" or 6" widths
• Easy to install
Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$177.99
The Count
Cheatin’ Death
Gaskets
Fenders for 18" to 21" Wheels on FXST, FXSTC, Dyna Wide Glide®
and 4-speed FXST Models from 1980 to Present
Measures 43/4"-wide with a 153/4"-radius
630015 ‘The Count’
630016 ‘PJ’
630017 ‘Cheatin’ Death’
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
Fenders for 16" Wheels on FL Softail® and Fat Boy® Models
(except FLSTS) from 1986 to Present
Measures 6"-wide with a 133/8"-radius
630020 ‘Cheatin’ Death’
General
16.17
Cross
Reference
Front Fenders
26146
668501
Front Fenders for Wide Glide® and Softail® Models
A trim, tire-hugging fender with chrome brackets, ready-to-paint. A reproduction of the Original
Equipment front fender on FXST, FXSTC, Dyna Wide Glide® and 4-speed FXWG models from 1980
to present.
26146 Replaces OEM 59924-80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.39
26350 Same as CC #26146 except with raw steel mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.09
668501 Same as CC #26146 except with the bracket welded to the fender instead of riveted
and black powdercoated primer on the fender and the bracket . . . . . . . . . . . . . . . . . . . . . . . . .$31.50
Front Fenders for 35mm Forks
Custom front fender for the 35mm front forks on FX, FXR and Sportster® models from 1973-early 1987.
Unpainted, and complete with integral chrome-plated brackets. For use with 18", 19" or 21" wheels.
26163 Replaces OEM 59031-83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.69
240351 Chrome fender with chrome bracket (replaces OEM 59923-80) . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.49
Custom Fender for Wide Glide®
Front Ends
A bolt-on version that completely replaces the
stock front fender on Dyna Wide Glide®, Softail®
and 4-speed FXWG models from 1980 to present
(except Heritage Softail®, Fat Boy® and Springer
Softail® models). Styled with an added accent
bead around its entire edge. These fenders include polished aluminum spacer blocks, and fit
with 19" or 21" wheels only. . . . . . . . . . . . .$131.94
13183 6" wide
Fenders for
Narrow Glide
Models
Sheetmetal
Narrow Front Fenders
These replacement narrow front fenders fit FX, FXR, Sportster® and Dyna Glide models from 1973 thru
1999 with narrow 35mm or 39mm front forks. Available chrome or unpainted with chrome brackets.
For use with narrow 18", 19" and 21" rims.
240331 Chrome fender and bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.79
240383 Unpainted fender and bracket (replaces OEM 59031-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99
Original-style front fenders for FX, FXR,
Sportster® and Dyna Glide models from 1973
to present. Available in a stock replacement
version or with the front tip cut back for a
trimmer look. Both fenders are unpainted and
include chrome brackets and the rivets necessary
to install them.
19652 Fender (repl. OEMs 59007-73TB,
59111-74) . . . . . . . . . . . . . . . . . . . . . . .$61.49
19655 Stock replacement bracket
(repl. OEM 59111-74) . . . . . . . . . . . .$25.29
19653 Shortened custom fender . . . . . . . .$54.84
19658 Shortened custom bracket . . . . . . .$25.29
Narrow Front Fender
for FL Models
16
Fender Mounting Kit for Custom Wide Glide® Front Ends
This kit is designed to mount a stock type front fender on FX and XL models 1973-1983 when the front
fork has been converted for the Wide Glide® “look” using the narrow glide tubes.
240470 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.74
16.18
Custom, unpainted steel narrow FXWG-style
front fender for all 4-speed FL model forks from
1949 thru 1984. Includes chrome mounting
brackets, the fender profile is designed to clear
18", 19" and 21" tires. . . . . . . . . . . . . . . . . . . .$48.39
26159 Unpainted (73/4"-wide)
Front Fenders & Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
240384
Foot
Controls
Front Fender for
Early ‘Touring’ Models
A precisely-crafted reproduction of the 1954
thru 1984 4-speed ‘Dresser’ front fender with
properly rolled edges and structural reinforcement. Will also fit FLT, FLHT, FLHS and
Road King® models from 1980 to present if no
fender lamp is desired and additional trim
holes are drilled. . . . . . . . . . . . . . . . . . . . . . . .$111.69
13193 Unpainted steel
Front Fenders for 4-Speed Models
Our replacement steel fenders fit all 4-speed FL
models from 1954 thru 1984, and have all of the
correct holes and dimples for fender trim and tip
lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.39
240384 1979-1980 style (replaces OEM 59101-79A)
240380 1981-1984 style (replaces OEM 59093-79)
Hand
Controls
Lighting
Chrome Fender Spacers
for Jesse James Fenders
Made from billet aluminum by A B Tech.
Necessary when using Jesse James or other custom fenders on Wide Glide® front ends.
38924 Ribbed (pair) . . . . . . . . . . . . . . . . . . . .$83.44
38925 Smooth (pair) . . . . . . . . . . . . . . . . . . .$66.69
Electrical
Exhaust
R
D
I
Rick Doss, Inc.
Intake
Front Fenders for Heritage
Softail® Models
Replacement fender without holes and dimples
for custom applications, i.e. early style fender
tips. Heavy-duty braces are riveted to fender
shell. Fits Heritage Softail® models from 1986 to
present, as well as all Fat Boy® models when a
full fender is desired.
13251 Smooth-style fender . . . . . . . . . . .$155.64
Exact duplicate of Original Equipment fender
with all holes and dimples for stock lighted
fender tips as well as upper and lower trim.
Heavy-duty braces are riveted to fender shell.
Fits Heritage Softail® models from 1986 to present, as well as all Fat Boy® models when a full
fender is desired.
13255 Stock replacement fender
(repl. OEM 59129-86) . . . . . . . . . . .$172.74
Engine
Chrome Billet Fender Spacers
Eliminate the need to spread fender brackets
and possible damage to custom paint with
machined aluminum custom brackets.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.64
44559 Fit 35 or 39mm ‘Mid Glide’ forks
44560 Fit 35 or 39mm Wide Glide® forks
44561 Fit 41mm ‘Mid Glide’ forks
44562 Fit 41mm Wide Glide® forks
Doss Fender Spacer Kit
Gaskets
Chrome spacer kit for all Wide Glide® front ends.
Set consists of 8 pieces total. Comes with four
1"-tall cone shape pieces and four .25"-thick
flat pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.64 Tranny
620001 Sold as set
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
ZCB Fender Mounting Kits
Chrome Universal Brackets
Steel Front Fender
for Fat Boy® Models
Get the great Fat Boy® look on your Heritage
Softail® model, or replace damaged fenders
on Fat Boy® models from 1990
to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.49
There’s always a need for helpful items when
building a bike. Brackets have 5/16" x 24 threaded
hole and 3/8" unthreaded hole. . . . . . . . . . . .$7.99
13258 Sold in pairs
Includes polished stainless steel countersunk
sockethead screws and polished billet aluminum
countersunk washers. . . . . . . . . . . . . . . . . . . . .$84.19
86667 Rear fender mounting kit
86668 Front fender mounting kit for FX forks
86669 Front fender mounting kit for FL forks
686728 Universal kit
Forks
& Shocks
Sheetmetal
General
16.19
Cross
Reference
Rear Fenders
Fat Bob Rear Fenders for
Softail® and FXWG Models
Fat Bob Rear Fender for FXR Models
Exact duplicates of the Original Equipment
parts. They have all of the wire loom clips and
necessary strut mounting holes, and accept
stock taillight assemblies as well as our custom
‘Cateye’ and ‘Lucas’ taillights and brackets
which can be found in Section 5.
Fits FXR models from 1982 thru 1986 and 1987
thru 1992 FXRTs.
13184 Fender only . . . . . . . . . . . . . . . . . . . .$93.99
Fenders
15739 Fits FX Softail® models from 1997 thru 1999 (repl. OEM 59753-97) . . . . . . . . . . . . . . . . . . . . . .$118.79
13206 Fits FX Softail® models from 1984 thru 1996 (repl. OEM 59914-86A) . . . . . . . . . . . . . . . . . . . . . .$86.74
26433 Fits 1980 thru 1986 FXWG models (repl. OEM 59904-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.59
Taillights and Brackets
26434 Black taillight bracket for models thru 1996 (repl. OEM 59993-80) . . . . . . . . . . . . . . . . . . . . . . .$37.09
26494 Chrome taillight bracket for models thru 1996 (repl. OEM 59993-80TA) . . . . . . . . . . . . . . . . . .$52.84
26100 Taillight assembly for models thru 1996 (repl. OEM 68008-73A) . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
13209
13208
Fat Bob Fender and Taillight Kit
for FXR Models
• Custom Fat Bob styling
• 3 piece kit includes Fat Bob fender, Fat Bob
taillight and deluxe taillight bracket
• Features flush-mount taillight positioning
• Bolts easily to all stock fender struts
• Compatible with Original Equipment
and CC sissy bar kits
13250 Fits all FXR models from 1982
thru 1994 . . . . . . . . . . . . . . . . . . . . . .$237.89
19755 Replacement taillight
mounting bracket . . . . . . . . . . . . . . .$59.89
Sport Bob™ Rear Fender Kits for Sportster® Models
These exclusive fender kits include a new ABS plastic fender extension for the front of the fender, a
Cateye taillight assembly with mounting bracket and the extra pop rivets necessary to reinstall your
circuit breaker clips. They looks great when combined with the CC #25576 one-piece Sport Bob™ gas
tanks found elsewhere in this catalog section.
13209 Fits Sportster® models from 1994 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.99
13208 Fits Sportster® models from 1982 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.99
Sheetmetal
Fat Bob Fender for Softail® Models
16
A value-priced alternative to our other sheet metal
offerings. Fits all FX Softail® models from
1984 thru 1995. . . . . . . . . . . . . . . . . . . . . . . . .$74.49
78314 Replaces OEM 59914-86A
Custom Fat Bob Rear Fenders
Original style universal and custom application
fenders. Available with left or right-hand
chain cutaway and with or without
taillight mount. Fenders measure approx.
38"-long, 7"-wide and 51/2"-deep. We recommend
using a CC #19762 Cateye taillight with CC #13181 fender. Fenders are unpainted.
Left Chain Cutaway
Fits all Big Twin models and bikes with the chain on the left side.
13178 Without taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
Right Chain Cutaway
Fits Sportster® models in custom frames and bikes with the chain
on the right side.
13179 Without taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
13181 With taillight mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$86.74
Fender Support
A chrome support brace designed for use with custom Fat Bob fenders when installing them on rigid
frames.
08950 Chrome fender support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
16.20
Quickbob™ Rear Fender
for FX Models
Custom rear fender for an easy, affordable conversion to the Fat Bob look. Fits stock 4-speed FX
frames and uses the stock width fender struts.
Cannot be used as a replacement fender for
FXWGs. Heavy-gauge metal for lasting service.
13188 Fits FX models from 1973 thru 1985
(except FXWG, FXST) . . . . . . . . . . . . .$91.84
Rear Fenders
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Wide Rear Fender Conversion Kits for Softail® Models
Electrical
Widens the rear section of your favorite model for a great new, look. These
kits are suitable for wide rear tires including the 230-series Avon tire and will
fit all stock and Santee® frames (298mm wide). The fender works great with
Le Pera ‘Bare Bones’, ‘Silhouette Solo’ and Corbin ‘Hollywood’ solo seats.
Each kit comes with TÜV-approval, gel-coated GFK fender, steel fender struts
and all hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$551.39
85438 Fits Softail® models from 1984 thru 1999
86503 Fits Softail® models from 2000 to present
Exhaust
Intake
Engine
Gaskets
‘Roll-Your-Own’ Custom Blank Steel Fenders
‘Ground Pounder’ Straight Cut Rear Fender
Heavy-gauge steel rear fender with straight-cut sides. Come undrilled to
permit customizing and give 135º wheel coverage. Include two built-in wire
tunnels for routing of wiring as well as adding extra strength and rigidity
to the fender. Fit all Softail® models with wide frames. . . . . . . . . . . .$277.39
06740 11"-wide
Note: Fenders need to be fitted and all clearances checked before painting.
•
•
•
•
•
Fabricate your own custom fenders with these blank steel fenders
Made just for the custom bike builder or experienced metal-worker
Permit you to cut, style and create your own front and/or rear fenders
Raw steel finish in smooth-side and round-top versions
Compatible with wheels from 16" up to 21"
Smooth-Side Front Fenders with 133/8" Radius
88171 Measures 6"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . . .$185.99
Smooth-Side Rear Fenders with 133/8" Radius
88172 Measures 71/4"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . .$191.09
88175 Measures 101/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . .$281.29
88176 Measures 11"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . .$281.19
Smooth-Side Front Fenders with 153/4" Radius
88177 Measures 43/4"-wide, accepts 19" to 21" wheels . . . . . . . . . . . .$202.69
88178 Measures 6"-wide, accepts 16" to 18 " wheels . . . . . . . . . . . . . .$185.99
Round Cut Rear Fender
Sleek looking, heavy-gauge steel rear fender
with round-cut sides. Come undrilled to permit
customizing. They give 175º of wheel coverage
and have two built-in wire tunnels for routing
wire and adding extra strength to the fender.
Covers 120 thru 180-width tires. Fit all Softail®
models with wide frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$302.34
06733 81/2"-wide
Note: Fenders need to be fitted and all clearances checked before painting.
Tranny
& Clutch
Smooth-Side Rear Fenders with 153/4" Radius
88181 Measures 9"-wide, accepts 16" to 18" wheels . . . . . . . . . . . . . .$281.09
88182 Measures 101/2"-wide, accepts 16" to 18" wheels . . . . . . . . . . .$257.99
88183 Measures 11"-wide, accepts 16" to 18" wheels . . . . . . . . . . . . .$257.99
Round-Top Rear Fenders with 133/8" Radius
88187 Measures 101/2"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . .$281.09
88188 Measures 11"-wide, accepts 16" wheels . . . . . . . . . . . . . . . . . . . .$281.09
16.21
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Rear Fenders
Dresser-Style Rear Fenders for FXR Models
Flip-Up Fender for FXR Models
These steel fenders mount between the stock fender struts of all FXR models
from 1982 thru 1994, and are available smooth or with a mount for the
late-style taillight. Original Equipment and CC sissy bar kits may be used
with these fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.29
13249 With 1973-up taillight mount (shown)
13248 With no taillight mount
Fender fits all FXR models from 1982 thru 1986, and 1987 thru 1992 FXRTs.
13182 Flip up fender ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.49
Note: This fender will require modifications to permit it to mount correctly to the Original
Equipment fender struts.
25933
25931
25932
Rear Fenders for FX Models
Detailed reproductions of the Original Equipment 4-speed FX rear fenders from 1973 thru
1985. Available with or without mounting
bracket for 1973 to 1998 taillight assembly.
25931 Original style with light mount . . .$73.59
25932 Original style without mount . . . .$70.29
25933 Custom bobbed . . . . . . . . . . . . . . . . .$75.29
Custom Rear Fender for FX Models
This bobbed steel rear fender fits 4-speed FX
models with stock struts from 1973 thru 1985.
May be used with a variety of custom taillights.
61/2"-wide. Unpainted steel. . . . . . . . . . . . . .$70.49
240422 Bobbed fender
Sheetmetal
Note: Taillight, visor and license mounting bracket are not
included and are shown for illustration purposes only.
16
Accurate reproductions of the one-piece rear
fenders on 4-speed FL models from 1980 thru
1984. One version is smooth with no taillight or
turn signal mounts, and the other has the 1973up taillight mount (but no turn signal mounts).
Fender strut mounting holes are already drilled.
13189 With no taillight mount . . . . . . .$116.49
13212 With 1973-up taillight mount
but no indentations for the
turn signal mounting bar . . . . . .$132.99
Hinged
Rear Fenders
for FL Swingarms
Hinged Rear Fender for
FX Models
Narrower version of the hinged FL rear fender
that bolts between the stock fender struts on 4speed FX models from 1973 thru 1985. It
requires no additional hardware or parts, and
the narrow fender complements the trim styling
of the FX while the hinged portion permits easy
access to the rear wheel for servicing.
Unpainted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.49
16.22
One-Piece Rear Fenders
for FL Models
These two-piece hinged
fenders fit all 4-speed Big Twin
FL frames from 1958 thru 1984.
One version is smooth with no taillight mount
and the other has the 1973-up mount, permitting the use of a variety of taillights. They also
fit FX models if FL struts are used and can be
adapted to FXWGs. A slight dent must be made
in the front right lower corner of the fender to
clear the FXE battery box. Unpainted steel.
(repl. OEM 59604-65A) . . . . . . . . . .$132.99
13214 With 1973-up taillight mount
(repl. OEM 59604-69B) . . . . . . . . . .$151.24
Rear Fender for FXR Models
Stock replacement rear fender for FXR models
from 1982 thru 1999 (except FXRT models).
Unpainted steel. . . . . . . . . . . . . . . . . . . . . . . . . .$74.49
Rear Fenders
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Custom Rear Fenders
Rigid Rear Fender for Big Twins
An accurate reproduction of the rigid rear
fender used on 1936 thru 1948 overhead valve
Big Twins. Perfect in detail and complete with
brackets ready to bolt-on. Unpainted. . . .$147.79
Sold exclusively by Custom Chrome®, and have
an early-style ‘reveal’ stamped in the rear tips.
Installation requires the removal of 5" from the
struts. Two decorative end caps are supplied to
finish off the shortened struts. Fit all 5-speed
Softail® models from 1986 thru 1999.
13253 With 1973-1999 taillight mount . .$136.39
13254 With no taillight mount . . . . . . . . .$113.14
13260 Replacement end caps
(sold in pairs) . . . . . . . . . . . . . . . . . . . . .$41.89
Note: 1997 and newer models require modification and/or
relocation of OEM fuse box. The stock turn signals must be
relocated, and the saddlebags on FLSTC models cannot be
reinstalled due to the shortened fender struts.
Replacement Rear Fenders
Hand
Duplicates of the fenders fitted to Heritage
Controls
Softail® models. Features turn signal mounting
holes and includes the taillight mount and fender
reveal. It’s ready to use as a replacement item or
for FXSTs converting to full fenders. Also available in a smooth version with only fender strut
Lighting
holes in it for custom taillights. . . . . . . . . .$142.84
Note: 1997 and newer models require modification and/or
relocation of OEM fuse box
13207 Stock style. Fits all Heritage Softail®
models from 1986 thru 1996
(repl. OEM 59126-86B)
13211 Smooth style. Fits all Softail® models
from 1984 thru 1996 as a custom fender
Electrical
Exhaust
78345
25213
19651
Intake
78347
26095
Rigid Rear Fender for 45s
An accurate reproduction of the rigid rear fender.
Perfect in every detail and comes complete with
brackets ready to bolt on. . . . . . . . . . . . . . .$146.14
13191 Fits 1937 thru 1946 45" Twins
Replacement Rear Fenders
Accurate reproductions of their Original
Equipment counterparts. They’re pre-drilled for
the fender struts and license plate mount, and
have the taillight mount in place. They fit all
Softail® models from 1984 thru 1996. Available
with or without provisions for the turn signal
bar.
78345 Without mounting holes for turn signal
bar (repl. OEM 59596-89) . . . . . . . .$115.99
78347 With mounting holes for turn signal
bar (repl. OEM 59126-86) . . . . . . . .$115.99
240469 Vintage rear fender without taillight
and turn signal mounts . . . . . . . . . . . . . .
Rear Fenders
for Early Sportster® Models
Steel rear fenders with stock mounting holes in
the sides for Sportster® models from 1959 thru
1978. Available with or without taillight hole.
We also have a shortened ‘Bobbed’ fender. Both
styles look very good with either CC #19644
‘Tombstone’ or CC #26357 ‘Beehive’ taillights.
25213 Without taillight hole . . . . . . . . . .$95.14
26095 Fits models from 1959 thru 1972
(repl. OEM 59611-67A) . . . . . . . . .$98.99
26096 Fits models from 1973 thru 1978
(repl. OEM 59611-73A) . . . . . . . . .$86.74
19651 Bobbed style . . . . . . . . . . . . . . . . . . .$98.99
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
$125.99$125.99
Frames
After
Forks
& Shocks
Rigid Rear Fender
Before
A replacement rear fender for rigid frame Big
Twins from 1949 thru 1957. Includes braces and
has holes drilled for the seat clip. Rear section is
not drilled to permit choice of taillamp. . . .$126.39
Rear Fender Hinge Cover
Sidecar Rear Fender
A very accurate reproduction of the Original
Equipment sidecar fender used on Big Twins
from 1936-early 1967. The brackets and the
fender are made of heavy-gauge steel. . .$167.74
Sheet-
The perfect accessory to hide chipped or dammetal
aged paint on your rear fender hinge. This cover
is made of billet aluminum and then highly polished. Special set screws engage the hinge for a
positive lock. Includes hinge cover, hinge pin,
General
gasket and hardware. Fits hinged rear fenders
1958-1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99
240081 Sold each
16.23
Cross
Reference
Rear Fenders & Accessories
Wide Fenders
for Rigid Frames
Custom flat fenders made of heavy-duty
14-gauge steel in wide widths to cover that really
big rubber.
95073 71/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.29
95074 81/2"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.89
95075 9"-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.74
Wide Fender Supports
12459
Chrome-plated braces designed specifically for wide rigid
frames with flat fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
95070 Fits 71/2"-wide fenders
95071 Fits 81/2"-wide fenders
95072 Fits 9"-wide fenders
Sheetmetal
12457
Universal Steel Rear Fenders
and Supports
Fenders
Available in 5" or 6" widths. Great for
trailers too.
12457 5" wide . . . . . . . . . . . . . . . . . . .$37.19
12459 6" wide . . . . . . . . . . . . . . . . . . .$35.69
Fender Supports
For use when installing 5" or 6" flat
fenders on rigid frames.
12462 Plain . . . . . . . . . . . . . . . . . . . . . .$21.49
12463 Chrome . . . . . . . . . . . . . . . . . . .$30.49
K&N Reinforced Rubber Fender Washers
Rear Fender Supports
12463
16
08950
Steel fender braces for 5" or 6" flat
fenders or Fat Bob rear fenders
when installed on rigid frames.
12462 Plain support
for flat fender . . . . . . . .$21.49
12463 Chrome support
for flat fender . . . . . . . .$30.49
08950 Chrome support for
Fat Bob fender . . . . . . .$31.99
1"-diameter round rubber washers have dozens of uses,
in addition to the obvious. Allows clean scratch-free, wellcushioned installations. Card of 12 packs of 10. .$5.75 per pack
22170 Fender washers
Universal
Fender Clamp
12464 Sold each . . . . . . . .$6.49
Note: CC #’s 12462 and 12463 are for use with
CC #’s 12457 and 12459 flat fenders.
16.24
Fender Tips & Trim
Apparel
Bike Kits
& Trailers
240077
240071
Seats
& Bags
240078
Eagle Head Fender Ornament
This die-cast fender ornament is highly detailed
and come with illuminated eyes. The illuminated version is internally lit with 2 independent
12V light bulbs which can be connected to the
turn signals or running lights. Fits FL, FLT and
FLHT models 1980-1999 and many custom applications.
240071 Illuminated eyes with gold accented
beak . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
330297 Replacement 12 volt bulb assembly. Fits
CC# 240071. Sold in pack of 5 . . . . .$9.49
27824 Replacement bulb,
12V 2W (box of 10) . . . . . . . . . . .$1.25 each
Skull Head Fender Trim
Quality die-cast trim piece is contoured to match
the front fender on FL, FLT, FLHT models 19801999 and many custom applications. Features a
highly detailed skull head logo with a choice of
chrome or gold trim and 12 volt illuminated
eyes.
240077 Chrome with illuminated eyes . . . .$36.49
240078 Chrome with gold trim
and illuminated eyes . . . . . . . . . . . . .$46.99
Foot
Controls
Chrome Front Fender Trim
Fits narrow Wide Glide®, Sportster® and FXR
style fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
240540 Sold each
Hand
Controls
Lighting
Electrical
Exhaust
27526
27527
Eagle’s Head Fender Ornaments
These chrome-plated die-cast ornaments will fit just about
any front fender after you drill the two mounting holes.
They’re 61/2"-long and come complete with thick rubber
mounting gaskets and hardware.
27526 All chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
27527 Chrome with gold accents on the beak, eyes
and plume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
27525 Chrome with gold accents on the beak and eyes
(repl. OEM 91569-89) . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
27525
Chrome Fender Tips
by National Cycle
Intake
Sturdy, die-cast fender tips provide that classic
look for Softail® and Wide Glide® fenders.
27437 Front for Fat Boy® models
from 1990 to present . . . . . . . . . . . .$64.99
27438 Rear for Fat Boy® models
from 1990 to present . . . . . . . . . . . .$74.94
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Mud Flaps by Ace Leather
Chrome Lower Fender Trim
for Big Twins
An exact reproduction of the lower trim
installed on FL models from 1968 thru 1975, but
chrome-plated without the black accents as in
the Original Equipment part. It may be installed
on bottom of the stock front fender fitted to all
FL, FLT, FLHT and FLHS models from 1949 thru
1985. Includes mounting hardware. . . . . . .$24.49
Fender Trim for Fat Boy® Models
Classic eagle fender trim design is engineered
for a perfect fit on FLSTF models from 1990 to
present. Includes mounting hardware.
26688 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.59
26694 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.69
These 50’s-style leather mud flaps have been
updated with stylish medallions. The underside
is lined with rubber to protect the leather and
ease in clean-up. They each have three mounting holes for a universal fit. Sold each.
50180 ‘Skull’ (polished nickel) . . . . . . . . . . .$49.99
50181 ‘8-Ball’ (ceramic medallion) . . . . . .$56.54
50182 ‘Iron Cross’ (ceramic medallion) . .$56.54
(not available in Europe)
50183 ‘Lone Star’ (polished nickel) . . . . . .$44.49
240205 ‘Jolly Roger’ (polished nickel) . . . .$49.99
Forks
& Shocks
Sheetmetal
General
16.25
Cross
Reference
Fender Tips & Trim
Khrome Werks®
Aristocrat II™ Fender Rail
for Heritage Softail® Models
Styled after the rail used on the Panheads of the
late fifties and mid sixties, this American-made
trim is formed from 3/4" chrome steel tubing.
Includes hardware to attach it to the front
fender of all Heritage Softail® models. Looks
best when installed with our Aristocrat II™ rear
fender rail (CC #31591). . . . . . . . . . . . . . . . . . .$88.99
31601 Fits Heritage Softail® models
Khrome Werks® Aristocrat II™
Rear Fender Rail for Heritage
Softail® Models
Based on the trim used on the full-dressed
Panheads of the late fifties and early sixties,
this American-made part is formed from 3/4"
chrome steel tubing and includes mounting
hardware and instructions. It will improve the
looks of any Heritage Softail® but looks best
when installed with our front fender rail
(CC #31601). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.99
31591 Fits all Heritage Softail® models
Note: This part may not be installed in conjunction with
CC #31414 trailer hitch.
Khrome Werks® Chrome Lower
Front Fender Trim Pieces
Highly-polished and chrome-plated lower trims
which follow the contour of the Original
Equipment front fenders. These American-made
parts include all mounting hardware. . . . .$23.49
31560 Fits FLT, FLHT, FLHS and Road King®
models from 1986 to present
(repl. OEM 59231-86) shown
31600 Fits all Heritage Softail® models from late
1986 to present (repl. OEM 59235-86)
26692
Stainless Steel Fender Molding
Polished stainless steel trim for the original front
and rear fenders from 1939 thru 1948. All molding
strips are complete with mounting clips.
26692 Front (repl. OEM 59200-39) . . . . . . . . . .$69.99
26693 Rear (repl. OEM 59882-39) . . . . . . . . . . .$69.99
26693
26589
26587
26587
Sheetmetal
26594
16
26588
26595
Fender Trim Set for 1949-1956 Big Twins
A complete set of fender trim and fittings that duplicate the
original 1949 thru 1956 factory styling. Can be used for
restoration, or to bring a classic look to any FL style front
fender from 1949 to present. Set includes 2 front fender side
trim spears, front fender lower trim, and front fender tip.
26596 Complete trim set (includes CC #’s 26587
and 26594) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
26587 Lower trim only (repl. OEM 59207-49) . . . . . . . . . .$12.49
26594 Front trim set with side spears
(repl. OEM 59205-49, 59215-49) . . . . . . . . . . . . . . . .$36.49
16.26
Vintage ‘V’ Style Fender Tips and Trim
Reproductions of the chrome front and rear fender tips and stainless steel trim pieces.
The fender tips are die-cast in the ‘V’ design used as Original Equipment from 1959 thru
1966. The front fender side trim and front fender lower edge trim are formed in stainless
steel. Each part includes hardware, and fits all FL front fenders from 1949 thru 1986 and
all FL rear fenders from 1958 thru 1986.
26586 Front fender trim set (includes CC #’s 26588 and 26595) . . . . . . . . . . . . . . . . . . . .$36.49
26588 Front fender tip ‘V’ design (indexed for side spears)
as used from 1959 thru 1966 (repl. OEM 59216-59) . . . . . . . . . . . . . . . . . . . . . . . .$27.49
26595 Front fender side spear set as used from 1957 thru 1973
(repl. OEMs 59205-57 and 59206-57) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
26587 Front fender lower trim as used from 1949 thru 1956
(repl. OEM 59207-49) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49
26589 Rear fender tip ‘V’ design as used from 1959 thru 1966
(repl. OEM 59887-59) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
Fender Trims & Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Doss Taillight Adapter Bracket
for Twin Cam 88® Models
Rear Fender Extension
Improves the overall appearance of this area on
the bike. It is made in the U.S.A. from black,
paintable high-impact A.B.S. plastic, and when
painted to match the fender and properly
installed, this fender extension gives the appearance of the fuller and rounder long fenders
used on rigid framed Big Twins. . . . . . . . .$44.99
13228 Fits all 5-speed Softail® models
Chrome Speedometer
Cable Guide
Install this guide to keep your paint from being
scratched.
65162 Fits most models . . . . . . . . . . . . . .$29.35
Tired of being stuck with the stock taillight
on your 1998 and newer model, because of
the way the Original Equipment rear fender is
made? Well, here’s the fix. The Doss taillight
adapter permits the use of virtually any
custom taillight, such as the Aurora or Doss
wide Tombstone, on 1998 and later models
equipped with ‘circuit board’ taillights. . .$24.69
46642 Taillight adaptor bracket
Hand
Controls
Lighting
Electrical
Note: It will be necessary to drill mounting holes and circuit
breaker clip holes for installation.
Exhaust
Intake
Khrome Werks® Rear Fender
Accents for Softail® Models
Attach with double-sided automotive-grade
adhesive tape to the rear fender above the
struts of all Softail® models. They were
specially-designed for Heritage Softail® models
with saddlebags to give them an early-style
rigid-mount look. Sold in sets. . . . . . . . . . . .$43.99
31660 Fit Softail® models from 1984 to present
Engine
‘Zenrail’ Mount Kit
for Buell® X-1 Models
This kit permits you to use bungie cords without
damaging your bike’s tail section. To use saddlebags,protector plates are required which are
available in composite or aluminum, and are
sold separately. A marker light kit which installs
at the ends of the Zenrail tubes is also available
separately, as well as a replacement cleat and
bolt kit.
50095 Zenrail mount kit . . . . . . . . . . . . . . .$260.84
50096 Composite protector plates
(sold in pairs) . . . . . . . . . . . . . . . . . . . .$40.44
50097 Aluminum protector plates
(sold in pairs) . . . . . . . . . . . . . . . . . . . .$60.59
50098 Marker lights (sold in pairs) . . . . . .$56.14
50099 Replacement cleat and bolt
(sold each) . . . . . . . . . . . . . . . . . . . . . . .$4.49
Gaskets
Gold ‘V’ Emblems
Curved to fit front and rear fenders, these diecast zinc emblems have self-adhesive backs that
mount easily to your bike. They measure approx. Tranny
21/2"-wide and 11/2"-tall. Sold each. . . . . .$10.99 & Clutch
10905 Gold
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
16.27
Cross
Reference
Gas Tanks for Sportster® Models
15654
25579
One-Piece ‘Rubber-Mounted’ Sport Bob™ Gas Tanks
for Sportster® Models
25586
Sheetmetal
Sport Bob™ Gas Tank and Dash Kits
16
We’ve taken our incredibly-popular Sport Bob™ gas tanks and combined
them with our best-selling dashes and speedometers to provide you with
easy-to-order kits. Kits include 3.2 gallon ‘rubber-mounted’ Sport Bob™ gas
tank, gas cap set, dash and dash mounting plate, 2:1 ratio speedometer
with reset knob, and a Fat Bob ignition switch. CC #’s 27585 and 27587 also
includes a speedometer cable and drive unit. All kits Include hardware to
mount the tanks to the frame.
Note: When these gas tanks are installed on 1992-up models and the Original Equipment
continuous venting system is eliminated or disconnected,you cannot reuse your stock vented
cap, but may replace it with an earlier version of the screw-type caps.
With Mirage® Dash and Mirage® Screw-Type Gas Caps
27587 Fits 1995 thru 1998 Sportster® models (except XL1200S) . . . . .$619.99
27586 Fits Sportster® models from 1982 thru 1994 . . . . . . . . . . . . . . . . .$574.99
With 3-Light Dash and Screw-Type Gas Caps
27585 Fits 1995 thru 1998 Sportster® models (except XL1200S) . . . . .$544.99
Give your bike a new look with these Sport Bob™ gas tanks. Front and rear
rubber mounts isolate the tanks from the vehicle’s vibration. The rear of
the tank has saddle brackets which slip over and rest on 3/4"-wide round
rubber isolators. The fronts are supported by heavy-duty rubber grommets.
Available to fit most Sportster® models 1957 thru 1998. One version is
smooth on top if a dash is not desired, and the other accepts our 2-light,
3-light or Mirage® dashes with large FL-style speedos.
For Sportster® Models from 1957 thru 1976
25575 With dash mounts (cam-style gas caps) . . . . . . . . . . . . . . . . . . . . .$261.14
15656 With dash mounts
(locking flush-mount gas caps – included) . . . . . . . . . . . . . . . . . . .$372.49
25579 Without dash mounts (cam-style gas caps) . . . . . . . . . . . . . . . . . .$247.59
For Sportster® Models from 1982 thru 1998 (except XL1200S)
25576 With dash mounts (screw-type gas caps) . . . . . . . . . . . . . . . . . . . .$362.89
15654 With dash mounts for all models from 1982 thru 1998 . . . . . .$401.99
25580 Without dash mounts (screw-type gas caps) . . . . . . . . . . . . . . . . .$351.79
15655 Without dash mounts for all models from 1982 thru 1998 . . .$433.34
Note: When these gas tanks are installed on 1992-up models and the Original Equipment
continuous venting system is eliminated or disconnected,you cannot reuse your stock vented
cap, but may replace it with an earlier version of the screw-type caps.
Replacement Parts
25419 Complete front mounting kit for 1982 thru 1994 models . . . . .$38.39
25422 Complete rear mounting kit for 1982 thru 1994 models . . . . . .$17.09
25577 Front rubber dampers ONLY (pack of 6) . . . . . . . . . . . . . . . . . . . . . .$12.49
25578 Rear rubber dampers ONLY (pack of 2) . . . . . . . . . . . . . . . . . . . . . .$13.74
With 3-Light Dash and Cam-Style Gas Caps
With 3-Light Dash and Flush-Mount Locking Gas Caps
15644 Replacement gas cap (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.59
16.28
Note: Fuel tanks, particularly where custom paint is planned, must be pressure-tested, then
sealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protect
the final finish and prevent internal rust during winter storage.
Apparel
Bike Kits
& Trailers
15795
Seats
& Bags
Foot
Controls
Hand
Controls
Rubber Mounted 'King' Tanks for Sportster® Models
15783
Lighting
Classic good looks of the original ‘Peanut’ tank, but with increased capacity
for an extended cruising range. We took our best-selling 3.25-gallon capacity ‘King’ tank and added rubber mounts to the front and rear. By isolating
the tank, we’ve reduced stress on the tank mounts for increased durability.
Electrical
CC #15643 features the updated petcock location that was introduced in
1995. Require vented screw-type gas caps. . . . . . . . . . . . . . . . . . . . . . . . . .$257.84
15643 Fits Sportster® models from 1995 thru 2003 (repl. OEM 61208-95)
25573 Fits Sportster® models from 1982 thru 1994 (repl. OEM 61203-87)
15796
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
One-Piece Sport Bob™ Gas Tanks
Give your bike a sharp, new look with these Sport Bob gas tanks. They
feature bolt-in, locking aircraft-style gas caps and rubber-mounting to
isolate them from vibration. Include all brackets, hoses and necessary
hardware for proper installation. Fit all Sportster® models from 1982
thru 1998 (except XL1200S models).
15795 Standard Sport Bob™ gas tank (holds 3.0 gallons) . . . . . . . . . . .$412.09
15796 2" stretched Sport Bob™ gas tank (holds 3.5 gallons) . . . . . . . .$464.74
15783 Replacement bolt-in vented aircraft style gas cap with lock . .$68.49
™
Driveline
Wheels,
Tires
& Brakes
Smooth-Bottom Tanks for Sportster Models
®
An updated design with a 3.3 gallon capacity and rounded lower edges.
Very similar to the latest factory design, but with petcock locations and
mounts for early or late frames. Includes mounting hardware. . . . . . .$188.49
15665 Fits Sportster® models from 1995 thru 2003
Frames
Forks
& Shocks
Sheetmetal
Sport Bob Tank Upgrade Kit
Everything you need when upgrading your Sportster model to
Sport Bob™ tanks. Includes, coil bracket, choke bracket, switch
cover, horn relocation bracket and hardware. . . . . . . . . . . . . .$36.84
25570 For use with CC #’s 25576, 25580 and 25586
Sport Bob tank kits
®
General
16.29
Cross
Reference
‘King’ Tanks for Sportster® Models
Add a new look to your Sportster® model with
these stylish gas tanks. Available with an aircraft-style bolt-in cap. Includes all mounting
hardware. Holds approximately 3.3 gallons.
15793 Fits all Sportster® models
from 1982 thru 1994 . . . . . . . . . . . .$295.99
from 1995 thru 2003 . . . . . . . . . . . .$295.99
Replacement Gas Cap
15784 Mini bolt-in vented aircraft-style
gas cap with lock . . . . . . . . . . . . . . . . .$60.99
‘King’ Tanks for Early
Sportster® Models
2"-wider than the ‘Standard’ tank... enough
to give extra mileage and just wide enough to
make them look great. These high tunnel tanks
are equipped with stock mounts but do not
include mounting hardware. They have a 3.1
gallon capacity. . . . . . . . . . . . . . . . . . . . . . . . . . .$125.39
19639 Fits all models from 1955 thru 1978
25574 Fits all models from 1979 thru 1981
‘King’ Tank with Flush-Mount
Gas Cap for Sportster® Models
True to the original look and shape of the stock
tank but features a locking flush-mount gas
cap. Bolt-on installation, and includes gas cap
and two keys. 3.25 gallon capacity. . . . . . .$209.84
from 1982 thru 1994
15670
Stretched One-Piece Fat Bob
Sheetmetal
• Features a 2"-stretch
• 3.5 gallon capacity
• Available in a smooth-top and dash mount
versions
• Single or dual screw-in caps (not included),
dual cam-style caps (not included)
• Single or dual flush aircraft-style caps
with locks are included
16
Smooth-Top for Late Models
Fit all Sportster® models from 1982 thru 2003
(except XL1200S models).
15670 With dual screw-in bungs . . . . . . .$506.59
15673 With a single screw-in bung . . . . .$460.19
15218 With dual flush locking caps . . . .$364.39
15219 With a single flush locking cap . .$352.24
Dash-Mount for Late Models
Fit all Sportster® models from 1982 thru 2003
(except XL1200S models).
15226 With dual screw-in bungs . . . . . . .$304.99
15684 With dual flush locking caps . . . .$591.09
One-Piece Sportster® Tank Hardware Kit
610004 Works with all tanks listed above .$80.99
Smooth-Top for Early Models
Fits all Sportster® models from 1957 thru 1976.
27588 With dual cam-style caps . . . . . . . .$425.99
Dash-Mount for Early Models
Fits all Sportster® models from 1957 thru 1976.
15682 With dual cam-style caps . . . . . . . .$461.99
16.30
Custom ‘Bobber Style Gas Tanks’ by Cole Foster
An absolutely beautiful new tank designed with the keen styling of Cole Foster - Salinas Boyz Customs.
The tank started life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tanks feature a mini pop-up gas cap, and a unique raised tapered bead down the
center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted
to any custom application. They use the existing stock rubber mounts or are included as needed.
Fuel capacity is 2.35 gallons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99
600155 Fits Evolution® Softail® models from 1984 thru 1999 and 4-speed FX and FL models
Note: These applications require the front frame dash mount to be cut off and rear screw hole modified.
600157 Fits Twin Cam 88® Softail® models from 2000 to present
Custom Gas Tanks
Apparel
Bike Kits
& Trailers
Seats
& Bags
260316
Foot
Controls
Hand
Controls
260318
Lighting
260317
Gas Tanks by LA Choppers
Tanks are fabricated from heavy gauge steel.
Features right side petcock with 22 mm bung.
Includes mounting tabs and brackets. Includes
Hot Match pop-up gas caps. . . . . . . . . . . .$1,205.00
Note: Tank kits will require some welding.
260316 5.2 gallon pointed gas tank for
universal/custom applications. 271/2"
long, 13"-wide, 9"-tall, 5" tunnel
260317 4.6 gallon curved point gas tank for
universal/custom applications. 251/2"long, 13"-wide, 8"-tall, 51/2" tunnel
260318 3.8 gallon coffin gas tank. Fits
univer-sal/custom applications. 271/2"long, 12"-wide, 9"-high, 41/2" tunnel
Aluminum Gas Tank with
Optional ‘Flip-Up’ Dash
Electrical
Dramatically improve the looks of your
Softail® model with this bolt-on, stock
replacement, gas tank. Hand-made in England
from 18-gauge aluminum, this tank permits
you to retain your Original Equipment
keyswitch, speedometer and dash lights. An innovative, removable aluminum dash is optional, and
completely hides the filler cap for a smooth look. A kit that lets you re-use your stock dash is also
available. If you prefer to run a bike with no clutter, then you can order the gas tank alone for a
low-profile custom look. Works with all Bolt-in Aircraft-Style gas caps (CC #’s 08660 and 08661)
listed below (not included). Fits all Softail® models (except Deuce™ models) from 2000 to present.
86613 Gas tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,419.00
86614 Dash kit with hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$178.99
86616 Hardware kit for re-using the Original Equipment dash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.99
Aircraft-Style Gas Cap Sets
Low profile high-tech gas caps. Designed to be used with the gas tanks above. Kits include mounting
ring, gasket, screws and cap. Sold each.
08661 Locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.49
08660 Non-locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
260700
260700
Driveline
Wheels,
Tires
& Brakes
260701
Frames
260701
Forks
& Shocks
Sheetmetal
Coffin Tanks by Paughco
Paughco, a long time leader in producing custom parts captures the essence of the sixties era chopper
with the new release of these outstanding coffin tanks. These tanks are for custom applications.
260700 2.5 gallon, 21" length, 12” width, 7" tall, low tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$569.99
260701 4.0 gallon, 251/2" length, 12" width, 9" tall, high tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$629.99
16.31
General
Cross
Reference
Paul Yaffe Gas Tanks
‘Zombie’ Gas Tank
A totally unique shape that sets off an
unusual and unique look. It is a replica of the
Sportster® tank but stretched, raked, wedged and raised
so the profile and tunnel looked like it was poured over PYO’s chopper
frames. With a 251/2"-long tunnel, this tank fills every inch of the Chopper
frame backbone and matches the angle of the cradle rails perfectly. The
retro-look is sure to please. Includes weld-on mounting straps. . . . . .$874.79
06573 For custom applications
‘Zombie II’ Gas Tank
Zombie tank design has been very popular amongst
bike builders and custom shops. The ‘Zombie II’ is a more
exaggerated version of the original ‘Zombie’ tank to fulfill the need of
chopper designs. Formed from 16-gauge steel and tig welded for strength.
Tank includes chopper gas cap and tank mounting straps. Tanks are pressure tested and shipped raw and ready for mock-up, body and paint. Some
welding is required for installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,100.99
600074 3.25 gallon ‘Zombie II’ gas tank
‘Roadster’ Gas Tank
Sheetmetal
The ultimate look for your custom bike! Tank has a 5" stretch
and a perfect teardrop shape. Hydro-formed from 16-gauge steel and tig
welded for strength. Specifically-designed for PYO ‘Roadster’ chassis kits,
but may be adapted to many custom applications. Features a flush-mount
gas cap, and includes weld-on tank mounting straps. . . . . . . . . . . . . . .$1,069.00
16
‘Roadster Lite’ Tank by Paul Yaffe Originals
A thinner more streamlined version of the full size Roadster tank (CC #06571).
• Die-formed from 16 gauge steel
• Measures 27"-long with a 4" ‘V’ pocket at the base for frame clearance
• Gas cap guaranteed to never leak
• Fits custom applications and Softail® models with custom seats
600008 5 gallon ‘Roadster Lite’ gas tank . . . . . . . . . . . . . . . . . . . . . . . . .$1,069.00
‘Super Stretch’ Gas Tank Kit by Paul Yaffe Originals
‘Arrow’ Gas Tank
A tapered version of the ‘Roadster’ tank.
All it took was a wedge of material from the
halves to give the tank a more streamlined profile.
Die-formed from 16-gauge steel and each one includes
an exclusive pop-up leak-proof gas cap and a pair of tank
mounting straps. Measures 26"-long, 121/2" at its widest point,
with a 25" tunnel that has a ‘Y’ cut in it’s tail so you can fit a longer tank
on a shorter frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$995.99
600073 5 gallon ‘Arrow’ gas tank
16.32
This fantastic new stretched tank kit is created specifically for Softail® models from 1999 to present. Adapted from the ‘Roadster’ tank to a stock platform without needing any modifications on your frame. You can now
completely customize the look of your bike with a high-quality, bolt-on kit.
Includes a 16-gauge steel fuel tank, hand upholstered snap-on seat and a
bracket that allows an ignition switch to be relocated under the tank. No
cutting, no welding just follow the easy instructions. Shipped raw and
ready for mock-up, body and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,699.99
600072 3.2 gallon ‘Super Stretch’ gas tank kit
Paul Yaffe & Stretched Gas Tanks
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
‘Villain’ Stretched Gas Tank
by Jesse James’
‘Double Trouble’ Gas Tank
Simply the most radical production tank ever made! In order to
bring the ‘DoubleTrouble’ and ‘Phantom’ chassis to production, a
super stretched tank needed to be created to fit them. Introducing the
'Double Trouble' gas tank that fit the 7" stretch chassis designs perfectly!
Measures 35"-long, 14"-wide and hold about 6 gallons. The tank has been
pushed so far forward, that the front of the tank covers the cradle rails!
Formed from 16-gauge steel and features an exclusive leak-proof Pop-Up
gas cap. Factory pressure tested and shipped raw, ready for mock up, body
and paint. Mounting straps included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,400.00
600075 6 gallon ‘Double Trouble’ gas tank
Lighting
• Uniquely-styled tank provides an affordable option in defining
your ultimate hand-built custom chopper
• Originally created for use on many West Coast Custom Choppers
• Features a long, tapered shape with a raised custom fuel bung
• Includes two different caps; 5-bullet style and smooth
• Shipped with custom mounting brackets to weld to the frame
• Fuel capacity is approximately 3.5 gallons . . . . . . . . . . . . . . . . . . . . . . .$584.59
88120 Fits most aftermarket frames with a minimum of a 3" stretch
in the backbone and a 4" stretch in the front downtubes
(frame backbone diameters cannot exceed 2")
Electrical
Exhaust
Intake
Engine
601800
Gaskets
Tranny
& Clutch
601803
Driveline
‘Chopper’ Gas Tank
Created for a contemporary look that would
preserve the long narrow Chopper line, yet compliment
the technical, down-to-business look of today’s modern Chopper.
It is sectioned 5" out of the center more than the Roadster tank and
wedged from front-to-rear. This gives it a balanced, streamlined look
that maintains the Chopper heritage, yet allows the lines of the bike
to flow from front-to-rear. Includes weld-on straps. . . . . . . . . . . . . . .$1,069.00
Wheels,
Tires
& Brakes
Stretched ‘Super Cruiser’ Steel Gas Tanks
for Custom Applications
• Made of heavy-gauge steel for maximum strength and durability
• Designed to use pop-up caps or bolt-in cap kits
• Tank must be fitted to frame before painting
• Available in a 5 or 6 gallon tank with 2" or 5" stretch
601800 5 gallon tank with 2" stretch made for pop-up cap . . . . . . . . . .$699.99
601801 5 gallon tank with 2" stretch made for bolt-in cap . . . . . . . . . . .$699.99
601802 6 gallon tank with 5" stretch made for pop-up cap . . . . . . . . . .$699.99
601803 6 gallon tank with 5" stretch made for bolt-in cap . . . . . . . . . . .$699.99
Custom Pop-Up Gas Caps
47775 Stainless Steel (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99
47777 Chrome (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49
Tank Mount Kit
Features two weld-on tank mount straps with grommets and spacers. . .$28.99
06575 For custom applications only
Aircraft-Style Bolt-In Gas Caps
Comes with mounting ring, gasket, screws and cap.
08661 Locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.49
08660 Non-locking vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99
16.33
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Stretched Gas Tanks
86254
686580
15262
86260
Dash-Mount Available
Sheetmetal
Custom One-Piece Stretched Tanks
16
No longer is trick paint enough to define a hot custom. But add a custom
tank and the crowds will pause longer to look at a tricked out bike.
Custom Chrome® offers enough options to satisfy just about any desire.
Our 2" stretch tanks are new stampings rather than using welded tips
to achieve stretch. They come
with or without dash recess, single or dual gas caps, and with
flush-mount locking gas caps
(included), or for stock-style
screw-in gas caps (not included).
Single cap tanks have inlet offset
to the right side. Tanks with dash
recess use FL-style dashes and
dash mounting plates. For the
extreme custom Softail® models,
15676
the 4" stretch tanks have welded
wings on the 2" stretch tanks for
the ultimate long, low look. Bike
builders should note that these
tanks, while simply bolting on stock tank mounts on the frame, will require
minor finishing (especially with welded tip extensions), and probably a custom seat to fit the rear contours of the extended tank. But the effort is well
worth it when the first admirer walks up and asks “how’d you do that?
Fit models from 1984 thru 1999. 4.2 gallon capacity.
Smooth-Top
15262 2" stretch for single screw-in cap (cap not included) . . . . . . . .$474.99
15261 2" stretch with dual flush locking caps . . . . . . . . . . . . . . . . . . . . .$385.44
15286 2" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$330.69
15680 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$420.49
15676 4" stretch for single screw-in cap (cap not included) . . . . . . . .$397.29
15687 4" stretch with single flush locking cap . . . . . . . . . . . . . . . . . . . . .$400.49
Dash-Mount
15688 4" stretch for dual screw-in caps (caps not included) . . . . . . . .$412.59
One-Piece Tank Hardware Kit Softail® Models
610003 Works with all tanks listed above . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
Stretched Aluminum Gas Tanks
for Custom Applications
Hand-crafted in 18-gauge aluminum for beauty, strength and light weight.
Designed to use either Original Equipment or aftermarket screw-in gas caps
or flush mount aircraft gas caps (must be purchased separately). Universal
mounting for most custom applications. Made in England.
‘Druiser’ 4.2 Gallon Capacity for Softail®-Style
Custom Frames with 2" Stretch
86251 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.00
86252 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,146.00
‘Druiser’ 4.6 Gallon Capacity for Softail®-Style
Custom Frames with 5" Stretch
86253 ‘Druiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.00
86254 ‘Druiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,259.00
‘Super Cruiser’ 6.0 Gallon Capacity for Softail®-Style Custom
Frames with 5" Stretch
86257 ‘Super Cruiser’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.00
86258 ‘Super Cruiser’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00
‘Super Stretch’ 4.2 Gallon Capacity for Softail®-Style Custom
86259 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,187.00
86260 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,146.00
‘Super Stretch’ 4.2 Gallon Capacity for Softail®-Style Custom
86261 ‘Super Stretch’ for screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . .$1,277.00
86262 ‘Super Stretch’ for bolt-in aircraft cap . . . . . . . . . . . . . . . . . . . .$1,234.00
‘Chopper’ 3.2 Gallon Capacity for Softail®-Style Custom Frames
with 5" Stretch
686580 ‘Chopper’ with pop-up gas cap (included) . . . . . . . . . . . . . . . .$1,636.00
Aircraft Gas Caps for Aluminum Gas Tanks
Available in either 21/4" or 3"-diameters, these cap kits come complete
and ready-to-install with bolt-in retaining rings, and hardware.
60285 21/4" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$148.00
60286 3" vented cap kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.00
60279 Replacement 21/4" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . .$106.50
60281 Optional 21/4" vented cap with lock . . . . . . . . . . . . . . . . . . . . . . .$117.50
60283 Replacement 3" vented cap ONLY . . . . . . . . . . . . . . . . . . . . . . . . .$112.00
16.34
Stretched & One-Piece Gas Tanks
Apparel
Bike Kits
& Trailers
15788
Weld-In
Aircraft-Style Bung
Seats
& Bags
Foot
Controls
Hand
Controls
15783
Lighting
One-Piece Stretched Gas Tanks
Smooth top gas tanks come with a single center-mounted aircraft-style gas
cap, and are stretched to either 2" or 4". Made of heavy-gauge steel and
inspected and pressure-tested to ensure quality
as well as a perfect fit. Replacement bolt-in aircraft-style gas cap available.
15787 2" stretched, fits all Softail® models from 1984 thru 1999,
holds 4.2 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$421.89
15788 4" stretched, fits all Softail® models from 1984 thru 1999,
holds 4.2 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$547.99
15789 2" stretched, fits all FXR models, holds 4 gallons . . . . . . . . . . . .$485.19
15792 2" stretched, fits all Dyna Glide models from 1991
to present, holds 3.75 gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$485.19
15783 Replacement bolt-in vented aircraft style gas cap with lock . .$68.49
One-Piece ‘Street Pro’ Stretched Gas Tanks
Electrical
These custom narrow stretched tanks have single bungs on the right side of
the tanks, and there are two different styles to choose from. Formed on allnew tooling to ensure quality, these tanks hold approximately 3.8 gallons
and are stretched 3" more than their stock counterparts. They require custom seats, and fit all Softail® models from 1984 thru 1999.
Exhaust
15757 Tank with single screw bung for late 1996-up gas caps . . . . . .$486.19
15759 Tank with single weld-in aircraft-style bung (includes cap) . . .$514.19
Intake
Note: CC #’s 15787, 15788 and 15792 require custom seats due to their longer lengths.
CC #15789 will fit with most aftermarket seats.
Engine
Gaskets
Tranny
& Clutch
15273
Driveline
Wheels,
Tanks for FXR Models
15263
Tanks for Dyna Glide Models
to achieve stretch. They come with or without dash recess, single or dual
gas caps, and with flush-mount locking gas caps (included), or for stockstyle screw-in gas caps (not included). Single cap tanks have inlet offset to
the right side. Tanks with dash recess use FL-style dashes and dash mounting plates. They fit all models from 1991 to present and hold 3.75 gallons.
Tires
& Brakes
to achieve stretch. They come with or without dash recess, single or dual
gas caps, and with flush-mount locking gas caps (included), or for stockstyle screw-in gas caps (not included). Single cap tanks have inlet offset to
the right side. Tanks with dash recess use FL-style dashes and dash mountFrames
ing plates. Tanks fit all models from 1982 thru 2000 and have a 4.0 gallon
capacity. Models with stock turn signals mounted to the top triple tree must
relocate them to avoid contact with the tank.
Smooth-Top Tanks
15273 2" stretch for dual screw-in caps (caps not included) . . . . . . . . .$357.94
15695 2" stretch for single screw-in cap (cap not included) . . . . . . . . .$314.99
15696 2" stretch with single flush locking cap (cap is included) . . . . .$374.19
Smooth-Top Tanks
15698 2" stretch for single screw-in cap (cap not included) . . . . . . . . .$372.99
15693 2" stretch with dual flush locking caps (caps are included) . . .$493.29
Dash-Mount Tanks
Tanks have 4.0 gallon capacity.
Dash-Mount Tanks
Tanks have 3.75 gallon capacity.
Replacement Flush Locking Gas Caps
for Smooth-Top and Dash-Mount Tanks
15639 Dual flush locking caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.29
15644 Single vented flush locking cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.59
16.35
Forks
& Shocks
Sheetmetal
General
Cross
Reference
One-Piece Gas Tanks
675705
3.3 Gallon Mustang Tank
675703
675701
This one piece tank is perfect for a variety of
custom applications. It has rounded mounting
plates front and rear that are welded in place.
It features a twin cap look, but the left neck
is non-functional, for appearance only. The
3.3 gallon capacity tank fills on the right-side
only. Tunnel measures 21/2"-high x 23/4"-wide.
Tank measures181/2"-long x 12"-wide. . .$141.49
Note: All fuel tanks should be test fitted, pressure tested,
and pre-sealed before painting.
Pro Image I & II Chopper Gas Tanks
The latest and greatest one-piece chopper gas tanks
available! Fabricated from heavy-gauge steel with 4.1
or 4.7 gallon capacities. Compliments chopper frames with 4" downtube stretch and 3" backbone
stretch. Backbone outer diameter cannot exceed 13/4". Available with screw-in cap, flush cap or raised
cap. Includes rubber mounted weld-on brackets.
Pro Image I Chopper Gas Tanks
675700 4.7 gallon with screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
675701 4.7 gallon with flush cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
675702 4.7 gallon with raised cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
Pro Image II Chopper Gas Tanks
675703 4.1 gallon with screw-in cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
675704 4.1 gallon with flush cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
675705 4.7 gallon with raised cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
Special Flush Mount Gas Cap
675706 Required for CC #’s 675701, 675702, 675704, 675705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.99
Custom Chrome® Custom
“Low Tunnel” Gas Tank
This 2.8 gallon custom tank features a 11/2"-high
tunnel with universal style mounts for custom
applications. Accepts 3/8" NPT threaded petcock.Tank measures 151/2"-long x 9"-wide x
7"-high with a 11/2" tunnel. . . . . . . . . . . . .$104.49
Sheetmetal
Note: All fuel tanks should be test fitted, pressure tested,
and pre-sealed before painting.
16
38590
38591
Daytec™ Gas Tanks
Daytec™ offers these high-quality 16/14-gauge steel gas tanks in 3.5 gallon and 4.6 gallon capacities.
They’re great for aftermarket frames with up to a 2" stretch. Made in the USA. . . . . . . . . . . . . . . .$817.94
38587 4.6 gallon, one-piece tank for Daytec™ ‘Episode’ frames with a 2"-stretch (CC #38528)
32273 4.6 gallon, one-piece tank for Daytec™ ‘Chopper’ frames (CC #’s 32252, 32253, 32260 and 32261)
38588 3.5 gallon, one-piece tank for Daytec™ ‘Episode’ frames with a 2"-stretch (CC #38528)
32274 3.5 gallon, one-piece tank for Daytec™ ‘Chopper’ frames (CC #’s 32252, 32253, 32260 and 32261)
38589 4.6 gallon, one-piece tank with a 2"-stretch for the flatside tank mounts on Daytec™
Softail® frames with a 2"-stretch
38590 3.5 gallon, one-piece tank with a 2"-stretch for the flatside tank mounts on Daytec™
Softail® frames with a 2"-stretch
38591 4.6 gallon, one-piece with a 2"-stretch for Daytec™ ‘Skulker’ frames
38597 3.5 gallon, one-piece with a 2"-stretch for Daytec™ ‘Skulker’ frames
38695 4.6 gallon, one-piece with a 2"-stretch. Universal fit for 2"-stretched frames
38696 3.5 gallon, one-piece with a 2"-stretch. Universal fit for 2"-stretched frames
16.36
‘Peanut’ Tank
A quality reproduction of the Original Equipment 2.4 gallon gas tank. . . . . . . . . . . . . . . . .$90.89
12724 Fits early Sportster® and K models from
1955 thru 1978 (replaces OEM 61006-63B)
Note: All fuel tanks should be test fitted, pressure tested, and
pre-sealed before painting.
Note: Fuel tanks, particularly where custom paint is
planned, must be pressure-tested, then sealed with tank
prep (CC #3991012) and Kreem (CC #3991008) before
painting, to protect the final finish and prevent internal
rust during winter storage.
Regency Gas Tanks
Apparel
Bike Kits
& Trailers
U.S. Patent #
US 6,478,335 B2
Seats
& Bags
Weld-In
Aircraft Style
Bung
Foot
Controls
Hand
Controls
Regency™ ‘Adjustable’ One-Piece Stretch Tanks for Softail® Models
• Created by our in-house, master customizer, john reed
• Small, sleek one-piece tank with a single screw-in or weld-in bung
• All-new adjustable rubber mounting system permits you to slide the tank
back-to-front 2", and the front of the tank up and down 2"
• Permits you to locate your tank according to your personal tastes
• Fuel capacity is approximately 4 gallons
• Fits with most Original Equipment and aftermarket seats . . . . . . . . .$308.19
Lighting
Fits all Softail® Models from 2000 to Present
Can also be installed on Softail® models from 1984 thru 1999, and Sportster®
models from 1995 thru 2003 with the additional purchase of a mounting kit.
46541 Adjustable tank with single screw-in bung for late 1996-up gas caps
Electrical
46543 Adjustable tank with single weld-in aircraft-style bung (includes cap)
Tank Mount Kits
610000 For Softail® frames from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . .$49.99
610001 For Sportster® frames from 1995 thru 2003 . . . . . . . . . . . . . . . . . . . . .$39.99
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Stock
Regency™
Driveline
design by john reed
Wheels,
Tires
& Brakes
Frames
Regency ‘Flatside’ Fat Bob Gas Tanks
™
A single sheet of seamless, one-piece steel is deep-drawn to form the perfect geometric curved outer panels
of our all-new, 6-gallon flatside Fat Bob gas tanks. Unlike tanks with add-on extensions, these tanks carry
more fuel, and don’t require hours of body work to get the contours just right before painting. Even more
important than increased riding range, the greatest benefit of these tanks is their sensational style! Styled
after the classic European gas tanks, you’ll see a big difference as soon as they are bolted on. Over two
inches longer than stock tanks, the bike suddenly looks dramatically longer and lower. A Custom Chrome®
exclusive. (May require modification of stock seat or purchase of aftermarket seat.) Fit Softail® models from
1984 thru 1999, and aftermarket frames with flatside tank mounts.
Gas caps must be purchased separately.
46185 Requires Late-Style screw bung gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$260.09
46181 Requires aircraft bolt in gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$306.19
46180 Requires aircraft weld-in gas caps (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$308.99
Forks
& Shocks
Sheetmetal
Note: All fuel tanks must be test fitted, pressure tested,
and pre-sealed before painting. Tanks shown painted for
illustration purpose only.
16.37
General
Cross
Reference
Two-Piece Gas Tanks & Gas Caps
Stretched Flatside Fat Bob Tanks for Softail® Models
Stretched tanks are one of the hottest custom bike trends. We start with our best selling
5- and 6-gallon tanks and weld on custom formed steel extensions. The extensions add
over two inches to the length of the tank and create a smooth flowing look by filling the
void between the seat and where the tank normally ends. Manufactured of heavy gauge
steel on new tooling, each tank is hand inspected and pressure tested to ensure quality and
a perfect fit. Designed for use with a stock dash, tank panel, late model (13/16" thread)
petcock and most standard width seats. Available with bungs for 1982-up screw-in, or
Custom Chrome® aircraft style gas caps. Fit Softail® models from 1984 thru 1999 and most
frames with mounts for flatside tanks.
Gas caps must be purchased separately.
Tank Capacity
Screw-Type
Caps
3.5 gallon
4.2 gallon
5.0 gallon
6.0 gallon
7.0 gallon
15525
15746
46188
46190
46552
$334.99
$279.09
$254.79
$334.99
$279.09
Bolt-In Aircraft
Caps
Pre-Welded
Aircraft Caps
n/a
n/a
15749
15750
08963
n/a
08801
08802
08803
08804
$372.19
$372.19
$372.19
15750
$310.29
$310.29
$310.29
$353.59
Note: Review photos below for cap styles. Stretched portion of tank does not hold fuel. Some wide or touring
seats may require modification. Due to the slightly different contour of the 6-gallon and 7-gallon tanks, flexible
steel, leather or plastic tank panels should be used. All fuel tanks must be test fitted, pressure tested, and presealed before painting. Tanks shown painted for illustration purpose only, tanks require finish body work.
Gas Tank Sets Sold Without Caps • Caps Available On This Page
1982-1991 Screw-In
Bolt-In Aircraft
Pre-Welded Aircraft
08661
Aircraft-Style Gas Cap Sets
Low profile high-tech gas caps. Designed to be used with the
aircraft-style tanks on this page.
08808
Weld-In Cap Kits
Kits include weld-in bungs and caps.
Locking
08673 Gas cap set, vented and non-vented . . . . . . . . . .$132.99
Non-Locking
Sheetmetal
08676 Vented cap kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99
16
Bolt-In Cap Kits
Kits include mounting rings, gaskets, screws and caps.
Locking
Non-Locking
Replacement Parts
08667 Non-vented cap without lock ONLY . . . . . . . . . . . .$30.49
08669 Non-vented cap with lock ONLY . . . . . . . . . . . . . . .$39.49
08664 Vented cap without lock ONLY . . . . . . . . . . . . . . . .$34.99
08668 Vented cap with lock ONLY . . . . . . . . . . . . . . . . . . . .$39.49
08682 Vented bolt-in trim ring (sold each) . . . . . . . . . . . .$24.49
08670 Non-vented bolt-in trim ring (sold each) . . . . . . .$24.49
08666 Bolt-in cap trim ring gasket (pack of 10) . . . . .$0.95 each
08677 Chrome mounting screws (pack of 12) . . . . . . .$1.79 each
260231 Filler cap set, without lock. Includes vented
and non-vented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99
260233 Filler cap set, with lock. Includes vented
and non-vented . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99
Aircraft Caps Available with or without Locks
for Either Bolt-In or Weld-In Applications
16.38
Flatside Gas Tanks
Designed to accept 1982-up screw in caps or our new aircraft style flush mount caps.
Each tank is formed on all-new tooling to ensure quality. The Aircraft gas caps mount in
a recessed bung that keeps the top of the cap flush with the tank surface for a smooth
custom look. Tanks are designed to work with stock and most aftermarket frames with
flatside brackets and single large diameter instruments, dashes, trim panels and 13/16"
petcocks. Fit Softail® models from 1984 thru 1999 and most aftermarket frames with
mounts for flatside tanks. Gas caps must be purchased separately.
Tank Capacity
Screw-Type
Caps
3.5 gallon
4.2 gallon
5.0 gallon
6.0 gallon
7.0 gallon
15297
46550
15298
15294
46551
$229.89
$204.79
$183.99
$229.89
$204.79
Bolt-In Aircraft
Caps
Pre-Welded
Aircraft Caps
n/a
n/a
15569
15570
15524
n/a
08806
08807
08808
08809
$221.59
$221.59
$221.59
$212.29
$212.29
$212.29
$212.29
Note: Due to the slightly different contour of the 6-gallon and 7-gallon tanks, flexible steel, leather or plastic
tank panels should be used. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting.
Tanks shown painted for illustration purpose only, tanks require finish body work.
Two-Piece Gas Tanks
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
15671
15603
Lighting
Electrical
Exhaust
Intake
Engine
15675
15296
Fat Bob Gas Tanks
Stretched Flatside Fat Bob Tanks for Softail® Models
Two-piece tanks feature 2" or 4" stretch with either 4.2 or 5.5 gallon capacity with flush locking gas caps (included) or for stock-style screw-in caps
(not included). Because they are longer-than-stock, tanks require custom
seats. 2" stretch tanks are new stampings without welded wing extensions,
but are also available with welded extensions to create the 4" stretch tanks
and a radical custom look. Fit Softail® models from 1984 thru 1999 and
most aftermarket frames with mounts for flatside tanks.
15216 2" stretch, 5.5 gallon with flush locking caps . . . . . . . . . . . . . . . .$383.54
15671 2" stretch, 5.5 gallon for stock-style screw-in caps
(caps not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.44
15672 2" stretch, 4.2 gallon ‘Slimline’ for stock-style screw-in caps
15690 4" stretch, 5.5 gallon with flush locking caps . . . . . . . . . . . . . . . .$400.39
15675 4" stretch, 5.5 gallon for stock-style screw-in caps
Gaskets
Tanks are designed with accurate, precision-placed mounting plates and
stud bosses. For increased durability, low-temperature welding is used
throughout the tank. Accepts either the dash for Low Rider® models or the
Fat Bob dash for FL and FXWG models. Features late 13/16" external-thread Tranny
fuel valve connections for Original Equipment style gas valves (CC #’s 25245, & Clutch
25243) or high volume versions like our extensive selection of Pingel® petcocks. Available to accept either pre-1982 cam-style gas caps or later model
screw-in style gas caps. The 6-gallon tanks have the classic Fat Bob profile,
but are a bit taller and wider. They are shipped with a dash spacer kit to
Driveline
accommodate the increased height. Fit all Original Equipment and aftermarket 4-speed Big Twin frames thru 1984 (except FXST models).
Tanks with Cam-Style Bungs
15289 3.5 gallon (repl. OEMs 61218-67A, 61426-67A) . . . . . . . . . . . . . .$199.39
25549 5.0 gallon (repl. OEMs 61211-67, 61228-67A) . . . . . . . . . . . . . . . .$209.59
15603 6.0 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$245.34
Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leather
or plastic tank panels should be used.
Tanks with Screw-Style Bungs
15295 3.5 gallon (repl. OEMs 61219-83, 61425-83) . . . . . . . . . . . . . . . . .$179.99
15296 5.0 gallon (repl. OEMs 61213-83, 61229-83) . . . . . . . . . . . . . . . . .$196.99
15602 6.0 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.19
Wheels,
Tires
& Brakes
Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leather
or plastic tank panels should be used.
Gas Tank Accessories
25548 Rubber grommet with a steel insert for use in mounting Fat Bob
tanks. Helps to isolate the tanks from vibration. Bag of 10. . . .$13.99
Frames
Forks
& Shocks
Sheetmetal
General
16.39
Cross
Reference
Two-Piece Gas Tanks
15652
Custom Gas Tanks with Locking Flush-Mount
Gas Caps for Big Twins
Fat Bob Gas Tank for FXR
Models
Classic Fat Bob look for all FXR models from 1982 thru 1999. It has the
appearance of split tanks, but is really a one-piece welded tank with twin
screw-type filler necks, and 13/16" external-thread gas valve fitting. Bolts
directly to the stock mounts and accepts all FL-style dash assemblies
(except Cateye) when the appropriate dash base is used. Included with each
tank is a CC #19095 super-flex speedo cable and a chrome tank ‘divider’
panel. The tanks are even equipped with internal emission control system
connections, for use on vehicles WITH fuel tank emission devices (i.e.,
California models).
25551 4-gallon Fat Bob gas tank for FXR models . . . . . . . . . . . . . . . . .$271.94
25553 Replacement chrome tank panel . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
These tanks are true to the original look and shape of stock tanks but feature locking flush-mount gas caps. They bolt-up right, and have all tabs,
vents and fuel outlets. For durability, they are low-temperature welded to
eliminate brittleness where the tank sections join and tabs are added. Tank
sets include flush mount locking caps and two keys.
15651 5-gallon ‘flatside’ Fat Bob tanks for all models from 1985
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.49
15652 5-gallon Fat Bob tanks for Big Twin 4-speed frames
thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$271.79
15659 6-gallon ‘flatside’ Fat Bob tanks for all models from 1985
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$378.99
Sheetmetal
Note: CC #25551 tanks require removal of solder from vent tube prior to installation on
vehicle when connecting fuel tank emissions control devices.
16
Fat Bob Gas Tanks with Flush-Mount Caps
Quickbob Gas Tanks for Dyna Wide Glide Models
™
®
Change the look of your bike by using one of the wide range of dashes for
Fat Bob tanks. When used with the appropriate dash base, you can choose
the classic look of ‘tin’ 2- or 3-light dashes, stock FXDWG dashes or go totally custom with a Mirage® cast dash. The possibilities are endless. Both versions hold 4.5 gallons and use either screw-in style or locking flush-mount
gas caps. They fit all Dyna Wide Glide® models from 1993 to present (they
do not permit the use of a fuel gauge), and include the tank, chrome
mounting hardware, and a chrome tank ‘divider’ panel.
15640 Quickbob™ tank for screw-in style gas caps (not included) . . . .$278.19
15662 Quickbob™ tank for flush-mount gas caps (included) . . . . . . . . .$346.49
sealed with tank prep (CC #3991012) and Kreem (CC #3991008) before painting, to protect the
final finish and prevent internal rust during winter storage.
16.40
Exclusive Custom Chrome® design features flush screw-type gas caps with flipup handles for opening and closing. Crossover lines are braided stainless steel
with banjo bolts at the lower front of each tank for a high-tech look and a
leak-proof connection. Tanks are welded using low-temperature techniques
for a less brittle, more reliable gas tank. Precise mounting system utilizes thick
plates and bosses. Available with standard Fat Bob mounts, or late-model
‘flatside’ mounting system. Tank sets include right vented and left non-vented
caps and all required mounting hardware.
15600 5-gallon ‘flatside’ tanks for all models from 1985 thru 1999 .$394.99
15601 5-gallon standard Fat Bob tanks for Big Twin 4-speed
frames thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$340.49
Replacement Flush-Mount Caps
15607 Replacement flush cap set, left and right . . . . . . . . . . . . . . . . . . . .$77.49
15615 Flush right cap, vented (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.49
15616 Flush left cap, non-vented (sold each) . . . . . . . . . . . . . . . . . . . . . . .$42.49
Two-Piece Gas Tanks & Accessories
Fat Bob Gas Tanks
with Emblem Mounts
Ideal for restoration work,
these 5 gallon tank sets have
factory installed mounting
brackets for the 1963-1965
style Harley-Davidson® emblems. They accept Low Rider®
dual gauges, or cast dashes
with Fat Bob speedometers and
trim, stock or custom pre-1982 style
cam lock gas caps and have been
updated to the late model, 13/16" thread
petcock. Designed for Big Twin models through
1984 with stock or most custom frames with Fat Bob brackets. . . . . . .$177.49
260136 5.0 gallon gas tanks
Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting.
Apparel
Bike Kits
& Trailers
3.5 Gallon Hand Shift
Gas Tanks
Two versions of the obsolete
hand shift style 3.5 gallon gas
tank sets. Accurate placement
of the shifter gate lugs and
shut-off rod hole centers
ensures trouble-free service.
Available in two versions. One is a
totally accurate reproduction of the
original, rod-style gas shut-off equipped
tank used from 1948 thru 1965. The other is
based on the same tank, but eliminates the early style
gas shut-off rod system and replaces it with the tank bottom fitting for the
late 13/16" external-thread petcock. Both tanks accept the correct cam-style
gas caps and are designed to accept the stock shifter guide.
25568 Original style with rod shut-off (shown) . . . . . . . . . . . . . . . . . . . . .$244.49
Seats
& Bags
Foot
Controls
Hand
Controls
Note: Replacement rod style gas shut-off available as CC #25294.
25569 Updated style for 1975-up petcock . . . . . . . . . . . . . . . . . . . . . . . . . .$244.49
Lighting
Electrical
Exhaust
Intake
Bob McKay Flatside Tank Mounting Bracket
Designed by noted Canadian customizer, Bob McKay. Permits you to mount
a set of flatside Fat Bob gas tanks on your Sportster® model. May need flatside mounting kit (CC #25550). Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.69
12000 Fits all Sportster® models from 1982 thru 1999
Bracket Mount Kit for Flatside Gas Tanks
Engine
• This patent-pending bracket can be used on any Softail® frame
• Allows for an alternative from the standard one-piece tank so that
customizing is limitless and fuel capacity can be increased
• Any flatside tank is now possible to install on your Softail® with this
bracket mount
• Installation is easy, no welding or modifications are required
600125 Fits Softail® models from 2000 to present . . . . . . . . . . . . . . . . . . .$178.95
Gaskets
Note: Must use 2000 thru 2002 coil bracket (CC #09335) which must be purchased separately.
Tranny
& Clutch
Driveline
Early Style Crossover Line for Fat Bob Gas Tanks
Chrome crossover line for Big Twins from 1948
thru 1965 (replaces OEM 62355-48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
260351 Sold each
86676
Frames
86665
Shut-Off Valves
for Fat Bob Tanks
Accurate reproduction of the pre-1966 thru-tank gas tank shut-off assembly. Complete assembled unit includes shut-off rod, seat, cap knob and all
washers, seals and hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49
ZCB Weld-On Gas Tank Extensions
Raw steel pre-formed, changes the look of your bike dramatically just by
welding on these two stylish tips without the expense of a new stretched
gas tank.
86665 For 3.5 gallon split tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$161.79
86666 For 5.5 gallon split tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$161.79
86676 For Twin Cam 88® tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$171.69
Wheels,
Tires
& Brakes
Gas Tank Shut-Off Valve Extension Knob
Allows easier operation of the shut-off valve. Chrome-plated. . . . . . .$10.99
36052 For stock gas tanks 1935 thru 1965
Gas Tank Fitting Kit
For use with rubber line on original-style
shut-off valves and tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
36051 For stock gas tanks 1935 thru 1965
16.41
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Gas Tank Mounting Hardware
25002
16106
25056
Replacement Mounts
for Fat Bob Gas Tanks
‘Flatside’ Tank Mounting Kits
Now you can mount late-model Original
Equipment or CC rubber-mounted ‘flatside’ gas
tanks on your 1958 thru 1984 FL/FX model, or
many aftermarket custom frames. Available in a
deluxe version that’s made in the USA by
Badlands, or an imported economy version. Kits
include detailed instructions, mounting brackets, and all necessary hardware. Requires minor
welding for installation.
16106 Deluxe kit . . . . . . . . . . . . . . . . . . . . . .$75.95
26465 Economy kit . . . . . . . . . . . . . . . . . . .$40.99
Lower Bolt Kit for Fat Bob Tanks
This kit replaces the stock lower front mounting
hardware on all motorcycles equipped with twopiece ‘flatside’ Fat Bob gas tanks from 1984 thru
1990. Kit includes threaded stud, two beveled
washers, and two chrome acorn nuts. . . . .$10.99
25001 For 4-speed FX’s from 1985 thru 1986
and Softail® models from 1984 thru 1990
No more small gas tanks for the guy who
torched off his Original Equipment brackets.
Restores original looks and value of 4-speed
frames thru 1984. Can be adapted to many
custom frames.
25002 Top mounting bracket set . . . . . . . .$27.49
25056 Front lower bracket ONLY . . . . . . .$13.99
260112 Complete kit (include upper and lower
front and rear brackets) . . . . . . . . . .$18.99
Upper Bracket for Fat Bob Tanks
This weld-on, cast iron, front bracket is used
to secure the tanks to the frame. . . . . . . . . .$12.49
260152 Drilled and tapped
Custom Hardware Kit
for ‘Flatside’ Tanks
Universal Fat Bob Gas Tank
Quickmount™ Kit
Sheetmetal
A precise and effortless way to mount Original
Equipment or aftermarket Fat Bob tanks to
custom or Original Equipment frames that have
had the gas tank brackets removed. It permits
the builder to temporarily attach the one-piece
bracket for a quick visual check of tank placement on custom applications, and once a tank
position is selected, the entire bracket assembly
may be welded in place for a stronger-thanstock, precision system of support. . . . . . . .$55.99
25048 Complete kit
16
Chrome-plated beveled washers and countersunk mounting screws provide a custom look.
They replace the cad-plated Original Equipment
screws and washers. . . . . . . . . . . . . . . . . . . . . .$16.99
25590 Fits all Softail® models from 1991
thru 1999
Mounting Kit for Fat Bob Tanks
Hardware kit includes bolts, nuts, washers and
spacers for mounting Fat Bob® tanks on 4-speed
style Big Twin frames through 1984 and most
customs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
260113 Complete kit
Mounting Kit for Fat Bob Tanks
Custom Mounting Kit
for ‘Flatside’ Tanks
A complete kit that can be used to update your
existing ‘flatside’ tank mounts, or used on
newly-constructed bikes instead of purchasing
Original Equipment parts. The beveled washers
and countersunk mounting screws are chromeplated, and provide a custom look. . . . . . . .$54.39
25550 Fits 1984 Softail® models, and all models
with split tanks from 1985 thru 1999
16.42
A ‘must’ when installing CC or Original
Equipment Fat Bob tanks on 4-speed frames
through 1984. Special washers in kit prevent
possible thread damage to rear mounting holes
and keep tanks from resting against heads.
26446 Complete kit . . . . . . . . . . . . . . . . . . . .$12.49
Another ‘must’ for installing Fat Bob tanks. One
of our mechanics came up with this little item.
It’s actually the chain guard mounting grommet,
but it works great in the front Fat Bob tank
mount holes to isolate the tanks from vibration.
25548 Bag of ten . . . . . . . . . . . . . . . . . . . . . . .$13.99
Rubber Mounts for ‘Flatside’
Gas Tanks
Accurate reproductions of the Original Equipment parts used to mount ‘flatside’ gas tanks to
4-speed FX models 1985 thru 1986, and Softail®
models from 1984 thru 1999. Pack of 6. . .$12.49
25577 Replaces OEMs 11447, 5775
Decals
Bike Kits
& Trailers
75130
75111
75140
75100
75132
75138
75103
Apparel
75114
Seats
& Bags
75127
75141
75116
Foot
Controls
75126
75120
75112
75104
75144
75118
Hand
Controls
75124
75122
Lighting
75139
75142
75143
Electrical
Factory Decals
Now Custom Chrome offers the factory decals you need when repainting your
bike or replacing a gas tank. Some of these decals can be used on either side of
the bike or tank, others come in right and left.
n/a ‘Belt Drive’
75100 ‘Tri-Plane’ black/red . .$19.99
75151 ‘H-D’ motor arched . . .$31.99
75103 ‘Bar & Shield’ . . . . . . . . . .$9.99
75104 ‘Round’ red/brown . . .$33.49
75152 ‘H-D’ silver/black/red . .$30.49
75111 ‘USA’ silver/black . . . . .$43.99
75153 ‘H-D’ gold/black/red . .$30.49
75138 ‘Style’ black/blue . . . . .$30.49
75154 ‘H-D’ silver/black/blue .$30.49
75139 ‘Style’ black/pearl . . . . .$28.99
75155 ‘2-Tone’ blue . . . . . . . . .$22.99
75140 ‘FLSTF’ silver/bronze . .$27.69
75156 ‘USA’ black/silver/red .$18.49
75141 ‘FLSTF’ silver/black . . . .$30.49
75159 ‘883 XL’ black/blue . . . .$19.99
75142 ‘Stacked’ gold/red . . . .$36.99
75160 ‘883 XL’ black/orange .$15.49
75143 ‘Stacked’ silver/black . .$36.99
75161 ‘1200 XL’ black/brown $24.99
75144 ‘Stacked’ black/gold . .$36.99
75162 ‘1200 XL’ black/blue . .$24.99
75145 ‘2-Tone’ burgundy . . . .$22.99
75164 ‘5-Speed XL’ . . . . . . . . .$31.99
®
75151
75159
Exhaust
75160
Intake
75155
75153
75154
Engine
discontinued
75145
75152
Gaskets
75156
Right
Left
Description
75101
75105
75107
75109
75112
75114
75116
75118
75120
75122
75124
75126
75127
75131
75132
75134
75136
75146
75148
75157
75102
75106
75108
75110
75113
75115
75117
75119
75121
75123
75125
75128
75129
75130
75133
75135
75137
75147
75149
75158
‘Winged’ red/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
‘FLHR’ bronze/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
‘FLHR’ Silver/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
‘FLHR’ grey/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
‘Lean’ blue/turquoise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Lean’ black/silver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Lean’ black/orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Lean’ black/red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Tail’ silver/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Tail’ gold/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
‘Arrow’ red/black/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
‘Arrow’ orange/red/bronze . . . . . . . . . . . . . . . . . . . . . . .$36.49
‘Arrow’ red/burgundy/silver . . . . . . . . . . . . . . . . . . . . . . .$36.49
‘Flame’ red/brown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
‘Speed’ red/tan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
‘Speed’ blue/grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.99
‘Speed’ red/brown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49
‘Fancy’ red/gold/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
‘Eagle’ silver/black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
‘XL’ orange script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49
Tranny
& Clutch
75161
75162
75164
Driveline
75105
75109
75157
75101
Wheels,
Tires
& Brakes
75149
Frames
75146
75134
75136
75107
Forks
& Shocks
Sheetmetal
General
16.43
Cross
Reference
Emblems
75320
75306
Gas Tank Emblems
75312
75308
75309
75300
75303
75314
75318
Sheetmetal
75305
75316
Here‘s the real thing! Original Equipment metal gas tank
emblems for Big Twins that not only look like stock and fit like
stock, they are stock! Perfect for restoration projects or
to add a traditional look to a late model bike.
75300 For 1937 thru 1946 (OEM 61769-40T) . . . . . . . . . . . . . . .$49.99
75301 Trim rails for CC #75300 (OEM 61798-41T) . . . . . . . . . .$42.49
75302 Adapter kit for Fat Bob tanks using CC #75300
(OEM 61785-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
75303 1947 thru 1950 (OEM 61769-47T) . . . . . . . . . . . . . . . . . .$49.99
(OEM 61783-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
75305 1951 thru 1954 (OEM 61774-51T) . . . . . . . . . . . . . . . . . .$52.09
75306 Trim strips for CC #75305 (OEM 61794-51T) . . . . . . . . .$31.99
(OEM 61784-92T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.29
75308 1957 (OEM 61773-57T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.99
75309 1958 (OEM 61773-58T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.99
75310 Flat adapter kit for CC #’s 75308 and 75309
(OEM 61780-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49
75311 Curved adapter kit for CC #’s 75308 and 75309
(OEM 61781-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49
75312 1959 thru 1960 FL models (OEM 61775-59T) . . . . . . . .$51.49
(OEM 61742-93T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
75314 1961 thru 1962 FL models (OEM 61776-61T) . . . . . . . .$77.69
(OEM 61740-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
75316 1963 thru 1965 FL and XL models
(OEM 61777-63T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.89
(OEM 61782-91T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
75318 1966 thru 1971 FL and XL models, 1971 FX models
(OEM 61771-66TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.49
(OEM 61741-93TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49
75320 1979 thru 1980 FL models and 1980 FLT models
(OEM 61253-79TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99
16
16.44
Flush Mount & Pop Up Gas Caps
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
60265
60264
Gas cap kits are designed with bolt-in or weld-in
bungs that come with a "bondo rim." A low rim
that surrounds the opening providing a convenient stopping place for the body work fillers or
lead. Gas caps are available in 3" or 21/4"-diameters and either vented or non-vented. Choice of
steel or aluminum weld-in bungs. Sold each.
Steel Weld-In Style
60265 3"-diameter, vented . . . . . . . . . . . . .$148.00
60266 3"-diameter, non-vented . . . . . . . . .$148.00
Aluminum Weld-In Style
60267 21/4"-diameter, vented . . . . . . . . . . .$140.00
60268 21/4"-diameter, non-vented . . . . . .$140.00
60269 21/4"-diameter, vented with lock .$164.00
60270 21/4"-diameter, non-vented
with lock . . . . . . . . . . . . . . . . . . . . . . . .$164.00
60271 3"-diameter, vented . . . . . . . . . . . . .$148.00
Hand
Controls
260424
Custom Flush Mount Gas Cap Kits
Bolt-In
60273
60274
60275
60276
Style
21/4"-diameter, vented . . . . . . . . . . .$148.00
21/4"-diameter, non-vented . . . . . .$148.00
21/4"-diameter, vented with lock .$155.00
21/4"-diameter, non-vented
with lock . . . . . . . . . . . . . . . . . . . . . . . .$155.00
60277 3"-diameter, vented . . . . . . . . . . . . .$152.00
Gas Cap ONLY
Replacement gas caps. Sold each.
60279 21/4"-diameter, vented . . . . . . . . . . .$106.50
60280 21/4"-diameter, non-vented . . . . . .$106.50
60281 21/4"-diameter, vented with lock .$117.50
60282 21/4"-diameter, non-vented
with lock . . . . . . . . . . . . . . . . . . . . . . . .$117.50
60283 3"-diameter, vented . . . . . . . . . . . . .$112.00
Pop Up Flush
Mount Gas Caps
by Tolle
Lighting
A slick, original design from
Sweden, that is taking the bike-building world by
storm! Highly polished stainless steel construction. Electrical
To operate, place fingers on center of cap, rotate
cap 1/4 turn, and spring loaded center pops-up.
Turning the center then unscrews the entire
assembly. After screwing cap back in, pushing
down center section and rotating it 1/4 turn
Exhaust
returns the center to the flush position. . .$171.93
260424 Vented pop up gas cap for right side on
late 1996-up models
260425 Non-vented pop up gas cap for left side
Intake
on late 1996-up models
(except models with gas gauge cap)
Note: Tolle flush mount caps will fit 1982-1995 tanks, but will not
fit flush on the outer edge. 1982-1995 tanks have a raised ridge
around the filler neck that 1996-up tanks don't have.
Engine
47716
Gaskets
Tranny
& Clutch
47715
48266
260252
Driveline
Small Flush Mount Filler Necks
and Gas Cap Kits
Flush Mount Gas
Caps by KüryAkyn®
These slick, flush mount gas caps have the hightech look of aviation-style fuel fillers. The built
in trim ring protects the painted surface around
the filler opening from dings and gas stains. A
keyed entry system permits their ultra thin profile and prevents tampering. Installation
requires no cutting and the “key” is included.
Stock gaskets must be reused on models from
late 1996 to present.
48266 Vented, for right-side tanks . . . . . . . .$49.99
48267 Non-vented, for left-side tanks . . . . . .$49.99
260252 Replacement key . . . . . . . . . . . . . . . . . . .$5.39
These filler necks and caps have an O.D. of only
80mm. They are available with 50mm I.D. in
either vented or non-vented versions for split
gas tanks. Replacement bolts and fixing rings
are also available. Sold each.
84739 Vented . . . . . . . . . . . . . . . . . . . . . . . . .$204.09
84740 Non-vented . . . . . . . . . . . . . . . . . . . .$174.99
84741 Replacement fixing ring kit . . . . . .$28.39
Wheels,
Tires
& Brakes
47779
Frames
Custom Pop-Up Gas Caps
• Vented gas caps that don’t protrude from the
surface of the gas tank at all!
• To access the filler, you press and twist... the
cap pops up, then unscrews normally
• For custom “weld-in” applications ONLY
• Sold each
47715 Stainless steel bung and cap . . . . . .$110.69
47716 Aluminum bung and cap . . . . . . . . .$104.69
47779 Stainless steel bung and chrome cap .$113.89
Replacement Pop-Up Caps ONLY
47775 Stainless steel . . . . . . . . . . . . . . . . . . . . .$52.99
47777 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49
16.45
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Chrome Gas Caps
Flamed
Peaked
Skull
Baby Moon
Ness-Tech® 'Radius' Gas Caps
Chrome-plated aluminum screw-in caps with a
low-profile design that measures only 3/8"-tall.
The exclusive ratcheting feature provides proper
torque. The vented gas caps have right-hand
threads, and the non-vented caps have left-hand
threads. A dummy gas cap is available to replace
the fuel gauge gas caps found on some late
model Big Twins. Sold each. . . . . . . . . . . . . . .$49.95
Louvered
Roundabout
Vented
05422 Fits models from late 1996 to present
05420 Fits models from 1982-early 1996
Non-Vented
05423 Fits models from late 1996 to present
05421 Fits models from 1982-early 1996
Grooved
Dummy Cap
05424 Replaces fuel gauge for symmetrical look
Button Head
Ness-Tech® ‘Low Gravity’ Screw-in Gas Caps
260023
This low profile, between 1/4" and 3/8"-tall, chrome-plated billet aluminum design stands out in style!
Ratcheting mechanism provides proper torque and alignment. Vented gas caps have a right-hand
thread, and non-vented caps have a left-hand thread. Sold each. . . . . . . . . . . . . . . . . . . . . . .$44.95 to $59.95
Sheetmetal
Fit all Models from 1982-Early 1996
16
Vented
Non-Vented
05185
05187
05189
05191
05193
05551
05553
05555
05186
05188
05190
05192
05194
05552
05554
05556
Fit all Models from Late 1996 to Present
Peaked
Baby Moon
Louvered
Grooved
Flamed
Skull
Roundabout
Buttonhead
Vented
Non-Vented
05726
05728
05730
05732
05734
05736
05738
05740
05727
05729
05731
05733
05735
05737
05739
05741
Peaked
Baby Moon
Louvered
Grooved
Flamed
Skull
Roundabout
Buttonhead
Chrome-Plated Steel Gas Caps
Perfect mechanical reproductions of the Original
Equipment parts. The low-pressure relief vent is
properly recessed in the cap to clear the filler
neck vent tube. For screw-style tanks from 1982
to present.
26580 Set of left and right caps . . . . . . . . . .$27.49
26582 Right side cap only (vented)
replaces OEM 61102-83A . . . . . . . . .$15.49
26581 Left side cap only (non-vented)
replaces OEM 61103-83 . . . . . . . . . . .$13.99
16.46
Screw-in Gas Caps
with Aircraft Look
Now you can enjoy the high-tech aircraft cap
look without the hassle of re-working your
existing tanks. These screw-in gas caps are
chrome plated, solid billet aluminum and have
actual countersunk stainless Allen head fasteners around the outside edge. Center lever raises
and lowers just like other aircraft caps, except
turning it removes the entire cap, not just the
center plug. No modification required, fits 1983up (except FLT and fuel gauge cap).
Caps are non-locking.
260023 Gas cap set. Includes one vented
and one non-vented . . . . . . . . . . .$66.49
260022 Vented (right side,
right hand threads) . . . . . . . . . . .$36.49
260021 Non-vented (left side,
left hand threads) . . . . . . . . . . . . .$28.99
Mini Bolt-In Gas Caps with Locks
Chrome-plated gas caps are available
individually or in sets. All come with assembly
locks and are compatible with gas tanks that
accept an 3.74" outer diameter x 2.46" inner
diameter aircraft-style cap. Sold each.
15786 Gas cap set . . . . . . . . . . . . . . . . . . . . . .$117.99
15784 Right side gas cap (vented) . . . . . . $60.99
15785 Left side gas cap (non-vented) . . . $58.99
Gas Caps
Apparel
Bike Kits
& Trailers
260032
Seats
& Bags
‘Renegade’
Foot
Controls
‘Bandit’
261008
Hand
Controls
Deluxe Scalloped Gas Caps
Chrome deluxe gas caps with scalloped edges.
Available vented or non-vented for most Big
Twin and Sportster® models from 1941-early
1973. Also fits most after-market replacement
gas tanks.
260030 Vented . . . . . . . . . . . . . . . . . . . . . . .$15.49
260031 Non-Vented . . . . . . . . . . . . . . . . . . .$15.49
260032 Deluxe gas cap set (one vented
and one non-vented cap) . . . . . .$28.99
Stainless Steel Gas Cap Sets with
Paint Protectors by Landmark
Never chip or scratch your paint again. Durable
alloy paint protector screws into the stock filler
neck offering a permanent air tight seal. The
polished stainless gas cap threads into the protector. Fit all models with screw-top tanks.
Lighting
Electrical
For Models from Late 1996 to Present
‘Bandit’
‘Renegade’
16502 16504
261009
16503 16505
Matched cap set with left and
right-hand threads . . . .$109.19
Single vented cap . . . . . .$56.29
Note: In mid-1996 the OEM tank design changed. The gas
tank bung on these later models DOES NOT have any welding bead above the sheet metal surface of the tank.
Exhaust
Intake
For Models from 1982-Early 1996
‘Bandit’
‘Renegade’
16491 16493
16492 16494
Matched cap set with left and
right-hand threads . . . .$109.19
Single vented cap . . . . . .$56.29
Engine
Gaskets
261005
Chrome Gas Caps
Chrome-finished, plastic-bodied, nylon thread,
screw-type gas caps. Fit models 1982 thru 1995,
with correct pressure relief valve and ratchet
‘overrun’ design to prevent over tightening.
26576 Matched cap set . . . . . . . . . . . . . . . . .$21.49
26577 Right side cap only (vented)
replaces OEM 61102-83A.
Also fits single cap models . . . . . . . .$13.99
26578 Left side cap only (non-vented)
replaces OEM 61103-83 . . . . . . . . . .$12.49
Aircraft Style Fuel Caps
by Goodridge
15850
Tranny
& Clutch
Aluminum gas caps available in locking and
non-locking versions. Mounting hardware and
flange gasket included.
Non-Locking
261005 11/2" polished . . . . . . . . . . . . . . . . . .$161.49
261008 3" polished, 43/4" overall width .$175.99
Driveline
Locking
261009 3" polished, 43/4" overall width .$182.49
Wheels,
Tires
& Brakes
15851
Screw-In Stainless Steel Gas Caps
for Models from 1983 to Present
“Screw-In” gas caps for Big Twin and Sportster® models
1983-up (except FLT and fuel gauge cap).
260077 Vented (right side - right hand threads).
Replaces OEM 61102-83A . . . . . . .$18.49
260078 Non-vented (left side - left hand threads).
Replaces OEM 61103-83 . . . . . . . .$16.99
and one non-vented cap . . . . . . . .$32.99
Frames
Low Profile Stainless Steel
Gas Cap Sets
260077
Forks
& Shocks
These polished gas caps feature an extremely
low-profile with either a peaked or domed top
design. They fit all models with screw-type gas
tanks from late 1996 to present. Sold in matched Sheetsets with left and right hand threads. . . . .$39.99 metal
15850 Peaked set
15851 Domed set
General
16.47
Cross
Reference
Stainless Steel & Mini Gas Caps
Series 2
Series 4
Series 3
Renegade
Series 1
‘Inferno™’ Mini Gas Caps
Bandit
Polished Stainless Steel Gas Caps by Landmark
Made from aircraft-grade billet stainless steel, not aluminum! Aftermachining, they’re polished to a
finish that rivals chrome for brightness. ‘Series 3’ caps include a pocket spanner to tighten or remove
the gas cap which helps defeat gas cap thieves. Single vented caps are available as well
as sets for Fat Bob gas tanks.
Style
Bandit
Renegade
Series 2
Cap Set
Series 3
Cap Set
Series 4
Cap Set
$101.14
$90.74
$90.74
16404
16406
16408
16410
16442
16444
Small 21/2"-diameter and three dimensional
flame design look great on any bike. Add any of
the broad range of matching ‘Inferno™’ accessories and create a completely coordinated look.
Chrome-plated die-cast construction with a
ratcheting mechanism that prevents over tightening. Fit all Original Equipment gas tanks from
1982 thru 1995 and most aftermarket gas tanks.
27485 Matched cap set, left and right hand
thread . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.49
27483 Vented cap (sold each) . . . . . . . . . . .$28.99
27484 Non-vented cap (sold each) . . . . . . .$28.99
Designed to fit the revised screw-type gas tank bung introduced in mid-1996 on all models.
Style
Bandit
Renegade
Series 1
Cap Set
Series 3
Cap Set
Series 4
Cap Set
$101.14
$90.74
$90.74
16510
n/a
16514
16516
16518
16520
Fuel Gauge Replacement Cap
Matches ‘Bandit’ and ‘Renegade’ Series 1 gas caps. For models that came stock with left side fuel
gauges. Sold each.
16508 Bandit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
16509 Renegade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
Replacement Pocket Spanner
For tightening and removing ‘Series 3’gas caps.
16501 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.89
Sheetmetal
Pointed
16
‘Mirage®’ Mini Gas Caps
Custom Chrome® design looks great on any bike.
Small 21/2"-diameter caps have a ratcheting
mechanism that prevents over-tightening. The
durable chrome-plated die-cast caps feature our
three dimensional design that complements our
complete line of ‘Mirage®’ accessories. Fit all
screw-type gas tanks from 1982 thru 1995.
27151 Set of left and right caps . . . . . . . . .$51.49
27149 Vented cap (sold each) . . . . . . . . . . .$28.99
27150 Non-vented cap (sold each) . . . . . . .$27.49
Domed
Stainless Steel Slim Gas Caps
“Slim” gas caps provide a super-low profile and
are made of premium quality stainless steel.
Each cap is polished to mirror finish that will
resist corrosion, rust and oxidation better than
standard chrome plated steel caps. Knurled
edges for improved grip. Fits Big Twins and
Sportster® models 1983 to present (except FLT).
Pointed Gas Caps
and one non-vented . . . . . . . . .$103.99
Domed Gas Caps
and one non-vented . . . . . . . . .$103.99
260423 Vented gas cap . . . . . . . . . . . . . . .$52.99
16.48
‘World’s Smallest Gas Cap’
Originally designed for the ‘Zombie’ tank, but
now it can be used in all kinds of custom applications. This tiny cap features double Viton
O-ring seals and is incredibly leak-resistant. Its
small diameter won’t disturb the lines of your
custom tank. Welding required. . . . . . . . . .$118.99
600076 Sold each
Custom Mini Gas Caps
Designed exclusively for Custom Chrome® featuring chrome-plated, die-cast top covers, threaded
plastic bodies, and a ratchet ‘overrun’ design to
prevent over tightening. The vented cap has a
pressure relief valve properly recessed in the cap
to clear the filler neck tube. For all models with
screw-type gas tanks 1982 thru 1995.
18462 Matched cap set, left and right hand
thread . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
Gas Caps
‘Live To Ride’ Gas Caps
Apparel
Bike Kits
Beautifully-plated steel caps with chrome or gold-accented Eagles
& Trailers
carrying a banner which says ‘Eagle Spirit’. Fit all models with
screw-style gas tanks 1982 to present.
Matched cap set, left and right
Left side cap only (non-vented)
hand thread
replaces OEM 61103-83.
Seats
18944 Chrome . . . . . . . .$45.89
18949 Gold . . . . . . . . . . .$32.84 & Bags
18947 Gold . . . . . . . . . . .$52.99
Right side cap only (vented)
replaces OEM 61102-83A.
Also fits single cap tanks.
18945 Chrome . . . . . . . .$29.09
18948 Gold . . . . . . . . . . .$32.84
Foot
Controls
Hand
Controls
Lighting
260005
Electrical
Late-Style
Exhaust
22029
22030
Original-Style
Regency Gas Caps
Cam-Style Gas Caps
Matches the complete Regency™ family of
accessories. Chrome screw-in style gas caps have
a ratcheting mechanism that prevents overtightening. Fit all models from 1982 to present.
22028 Gas cap set . . . . . . . . . . . . . . . . . . . . . .$51.69
22029 Left hand gas cap (non-vented) . .$25.99
22030 Right hand gas cap (vented) . . . . .$25.99
A variety of replacement and custom gas caps.
Available vented for single cap gas tanks and
the right side of Fat Bob gas tanks, or without a
vent for the left side of Fat Bob tanks. They fit
Original Equipment and replacement tanks with
cam-style bungs.
™
Polished Stainless Steel Late-Style Caps
Includes left and right caps for Fat Bob tanks.
26574 Plain cap set . . . . . . . . . . . . . . . . . . .$22.99
26570 Vented cap ONLY
(repl. OEM 61102-73) . . . . . . . . . . .$15.49
26571 Non-vented cap ONLY
(repl. OEM 61103-73A) . . . . . . . . .$15.49
Intake
Late-Style Gas Caps
for Late 1973-1982
Chrome gas caps for Big Twin and Sportster®
models from late 1973 thru 1982 (except FLT
and FXR models).
260003 Vented (repl. OEM 61102-73) . . . . .$16.99
260005 Gas cap set. Includes one vented and
one non-vented (repl. OEMs 61102-73
and 61103-73A) . . . . . . . . . . . . . . . . .$16.99
Chrome Original-Style Gas Caps
Includes left and right caps for Fat Bob tanks.
26499 Plain cap set . . . . . . . . . . . . . . . . . . .$10.99
12725 Plain vented cap ONLY
(repl. OEM 61103-36) . . . . . . . . . . . .$9.59
26021 Plain non-vented cap ONLY
(repl. OEM 61103-65) . . . . . . . . . . . .$6.49
Non-Vented
3-D Skull
8-Ball
Iron Cross
Polished Aluminum Skull
Gas Cap Cover
Vented
Non-Vented
06053 06056
06055 06058
06054 06057
3-D Skull
8-Ball
Iron Cross
Tranny
& Clutch
Driveline
Billet Gas Cap Cover
A new line of stylized accessories. Jewelry grade
conchos decorate these billet aluminum parts.
Iron Cross and 8 Ball are glossy, baked ceramic
on a heavy metal base. 3-D Skull is a polished
nickel casting with a dark background. Handmade in the USA. Iron Cross versions are not
available in Europe. Sold each. . . . . . . . . . . .$70.69
06059 06062
06061 06064
06060 06063
Gaskets
Wheels,
Tires
& Brakes
Ace Metal Stylized Gas Caps
Vented
Engine
A chrome-plated billet aluminum gas cap cover
with a built-in quartz analog clock with goldtone trim. It attaches securely with set screws to
any of the late-model gas caps (except plastic
caps) used from 1973 thru 1995. Clock has a
replaceable battery, and is not water-resistant,
but is easily removed for washing or during
inclement weather. Sold each.
37322 Gas cap cover . . . . . . . . . . . . . . . . . .$59.99
37321 Replacement quartz clock . . . . . .$15.99
Multiple skull design cast from an original handcarved mold . Attaches to OEM style gas caps
with epoxy (not included). . . . . . . . . . . . . . . .$21.29
37735 Sold each
Frames
Forks
& Shocks
Sheetmetal
General
16.49
Cross
Reference
Gas Cap Covers
PaintSaver™ ‘Plus’ Filler Neck Protectors
Made by Carlini Design for late 1996-up gas tanks that won’t accept the original model.
The polished stainless ring installs with silicone adhesive. Protects paint from chipping and
damage from fuel and fuel vapors getting under the paint. Sold each.
15582 Fits models from late 1996 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69
Note: In mid-1996 the OEM tank design changed. The gas tank bung on these later models DOES NOT have any
welding bead above the sheet metal surface of the tank.
Original PaintSaver™ ‘Plus’
Incorporates a nitrile rubber seal that is permanently vulcanized to the bottom of a thick
polished stainless steel beauty ring. Sold each.
25582 Fits screw-top gas tanks on most models from 1982-early 1996 . . . . . . . . . . . . . . . . .$26.69
25583 Matching fuel gauge beauty ring for models with tank-mounted fuel gauge . . .$26.69
25589 Fits cam-style fuel tanks used before 1982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69
3-Dimensional Gas Cap Covers
Krommett Custom Cap Covers
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
12730 For all models thru 1976
19356 For all models from 1977 thru 1983
(except screw-type caps)
Knurled Gas Cap Cover
An easy alternative for those who want a custom
look without a custom price. Simple installation
takes only minutes thanks to recessed set screws
and supplied adhesive. Designed for use with
1973-up stock gas caps. Sold each.
260064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.88
Sheetmetal
19037
19006
‘Live To Ride’ Gas Cap Covers
16
Distinctive covers are sand-cast from handcarved originals. Designed to fit over OEM style
caps. Glue them on with 5-minute epoxy, or use
silicone adhesive. Sold each.
37863 Skull . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.14
37868 Flame . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.24
Covers with chrome eagles feature a ‘A Way of
Life’ banner. Gold eagles have ‘Eagle Spirit’ banners. They attach with double-sided foam tape
and fit all late model gas caps 1973 to present
(except molded plastic caps).
‘A Way of Life’
19006 Chrome eagle (sold each) . . . . . . .$12.49
‘Eagle Spirit’
19037 Gold eagle (sold in pairs) . . . . . . .$33.49
16.50
‘Teardrop and Allen’
Gas Cap Cover
Features non-functional stainless steel buttonhead
rivets and teardrop indentations in the various
surfaces. Each of the die-cast parts is perfectly
chrome-plated and comes complete with all necessary mounting hardware. Fits over the late-model
cam-style and threaded gas caps (except molded
plastic) used since 1973. . . . . . . . . . . . . . . . . . . .$27.49
37265 Sold each
Faceted Gas Cap and Fuel Gauge
Window Cover
Gas cap cover slip-on cover for the left-hand side
with a cut-out for the fuel gauge. Chrome-plated
ABS plastic. Fit FXR, Dyna Glide and Road King®
models from 1988 thru 1995.
26778 Fuel gauge cover with cut-out
ONLY (sold each) . . . . . . . . . . . . . . . .$14.99
Gas Tank Fuel Filters
Apparel
Bike Kits
& Trailers
19478
Seats
& Bags
19479
Chrome Fuel Filter
Small size, but packs big protection for your
motor. Easily cleaned, reusable screen.
18255 For 5/16" fuel line . . . . . . . . . . . . . .$10.99
18256 For 1/4" fuel line . . . . . . . . . . . . . . .$10.99
19474
Foot
Controls
Hand
Controls
19480
Lighting
Gas Cap Gaskets
Quality replacement rubber gaskets that fit Original Equipment and aftermarket gas caps.
Sold in packs of 10.
19474 For threaded style gas caps on all models from 1982 to present (repl. OEM 61109-85C) . . .$24.49
19478 3.5 or 5.0 gallon 1941 thru 1982 right side and all 1958 thru 1982 single tanks
(repl. OEM 61111-77) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
19479 3.5 and 5.0 gallon right side tanks from 1936 thru 1976 (repl. OEM 61114-48) . . . . . . . . . . . . .$5.79
19480 3.5 and 5.0 gallon left side tanks from 1965 thru 1982 (repl. OEM 61116-65) . . . . . . . . . . . . .$10.99
Electrical
Exhaust
See-Flow Glass Fuel Filters
A custom in-line fuel filter for 1/4" or 5/16" line.
18240 Complete filter for 1/4" line . . . .$10.99
18239 Complete filter for 5/16" line . . .$10.99
18241 Replacement element . . . . . . . . . . .$7.68
Intake
15093
Engine
19882
K&N ‘Nylon’ Inline Fuel Filters
18261
Gaskets
Fit 1/4" fuel line.
19882 Large (card of 12) . . . . . . . . . . .$4.99 ea
15093 Small (card of 12) . . . . . . . . . . .$4.99 ea
18263
Tranny
& Clutch
Driveline
18262
18260
Wheels,
Tires
& Brakes
Russell™ Universal Fuel Filter
Unique design permits you to fit one filter to
either 1/4", 5/16" or 3/8" fuel lines, or mix inlet
and outlet sizes. Each filter comes complete with
six adapter fittings.
18273 Standard 3" filter . . . . . . . . . . . . . .$14.39
18241 Replacement element
for CC #18273 . . . . . . . . . . . . . . . . . . .$7.68
Russell™ Fuel Filters
Anodized in-line fuel filters are available for 1/4"
or 5/16" fuel line. Utilizes a threaded two-piece
design so the porous metal fiber filter element
Frames
may be replaced. . . . . . . . . . . . . . . . . . . . . . . . . .$11.95
1/4"
Chrome Pingel® Fuel Filter
Aluminum bodied filter flows more gas than
the competition. Made to be used with Pingel®
valves. Approximately 11/8" long. Made in U.S.A.
Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
26603 Fits 5/16" I.D. fuel line
5/16"
18245
18246
18247
18248
18260
18261
18262
18263
Red Filter
Blue Filter
Black Filter
Chrome Filter
Forks
& Shocks
Replacement Filter Element
A replacement element for use in the above
fuel filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.69
18249 Sold each
Sheetmetal
General
16.51
Cross
Reference
Pingel® Petcocks
These drawings are top views of the valves illustrating the positions of the levers and the nipples in left-side installations
Pingel® Power-Flo™ High Volume Petcock
Features a brass body with show quality chrome-plating or highly-polished aluminum stainless steel internal components and permanent stainless steel filter
screen. These petcocks offer the highest fuel flow available of any aftermarket fuel valve. Available to fit gas tanks from 1975 and later with 22mm tank
bung, or machine-cut 3/8" NPT threads that fit stock gas tanks thru 1974 as well as most aftermarket gas tanks. Dual outlet petcocks can be used with dual
carb setups or one outlet can feed the carb and the other can function as a feed in Nitrous Oxide System application. Made in the USA. Patented.
Reserve Petcocks with 22mm Threads 1975 and Later
All the features of 3/8" NPT reserve petcocks, but specifically designed to fit
1975 and later tanks with 22mm tank bung. No adapter required. Petcocks
have the the adapter nut installed for you. No additional sealants required.
27086
Chrome
Polished
26835
27085
27086
26838
26839
27087
27088
26842
Single outlet (illustration ‘A’) . . . . . . . . . . . . . . .$74.00 to $81.75
Single outlet (illustration ‘G’) . . . . . . . . . . . . . .$74.00 to $81.75
Single outlet with nipple down (illus. ‘H’) . . .$83.95 to $91.65
Dual outlet (illustration ‘D’) . . . . . . . . . . . . . . . .$84.10 to $91.05
Replacement Mounting Nut
26843 For use with 22mm threaded petcocks only . . . . . . . . . . . . . . . . . .$13.99
Reserve Petcocks with 3/8"-NPT Threads Pre 1975
Primarily for use on street bikes. The reserve position provides comparable
reserve fuel amount to the OEM and other aftermarket petcocks.
27085
Chrome
Polished
26700
27089
27090
26615
26600
27091
27092
26612
Single outlet (illustration ‘A’) . . . . . . . . . . . . . . .$64.60 to $72.30
Single outlet (illustration ‘G’) . . . . . . . . . . . . . . .$64.60 to $72.30
Single outlet with nipple down (illus. ‘H’) . . .$74.50 to $82.25
Dual outlet (illustration ‘D’) . . . . . . . . . . . . . . . .$75.65 to $82.60
Adapter Nut
Permits installation of 3/8"-NPT petcocks on OEM and aftermarket
gas tanks with 7/8" or 22mm tank bungs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
26602 Chrome-plated brass
26615
Sheetmetal
Rebuild Kits for Reserve Petcocks
Complete rebuild kit for single or dual outlet reserve valves. Includes necessary tools, photos, instructions and parts for three fuel valves. A 51/2" bench
vise is required.
26718 Complete kit with tools and components for 3 valves . . . . . . . . .$50.99
26719 Components only with parts to rebuild 5 valves . . . . . . . . . . . . . .$68.99
26704
26703
Pingel® ‘Guzzler®’ Petcocks
Machined from aluminum, they can be used with gasoline
and methanol. Features stainless steel internal components and springloaded ball detents for positive on/off positioning. Available with a 3/8"
hose barb or dual 5/16" barbs. Fits 3/8" NPT thread tank bungs as used
on stock gas tanks thru 1974 as well as many aftermarket tanks. On dual
outlet version, one outlet can feed the carburetor and the other can
function as a feed in Nitrous Oxide systems. Made in the U.S.A.
16
Note: These petcocks make no provision for fuel reserve.
26703 With 3/8" hose barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.00
26704 With dual 5/16" hose barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.00
16.52
Pingel® Petcocks
Pingel® Power-Flo™ ‘Designer’
High-Volume Petcocks
Same as the standard Pingel® petcocks, except
with brass show chrome plated ‘Designer’ bodies.
Designed for 22mm tank bungs used on gas tanks
1975 and later. Same maximum flow rate to keep
fuel at the carb where the fuel is needed. Same
comparable reserve fuel amounts as OEM and other
aftermarket petcocks. Made in the U.S.A. Patented.
26620 Round ‘Wave’ . . . . . . . . . . . . . . . . . . . . .$81.75
26621 Hex ‘Wave’ . . . . . . . . . . . . . . . . . . . . . . .$81.75
26622 Round ‘Finned’ . . . . . . . . . . . . . . . . . . .$81.75
26623 Hex ‘Finned’ . . . . . . . . . . . . . . . . . . . . . .$81.75
26625 Hex with AN6 fitting for custom
braided fuel lines . . . . . . . . . . . . . . . .$104.95
26626 'Guzzler' . . . . . . . . . . . . . . . . . . . . . . . . . .$99.90
26627 Hexed Oval . . . . . . . . . . . . . . . . . . . . . . .$81.75
26628 Brass AN6 fitting for S&S super E
and G carburetors when using
CC #26625 AN6 petcock . . . . . . . . . . .$22.95
26620
26622
26621
26623
26627
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Pingel® Power-Flo™ ‘Designer’
High-Volume Petcocks
Same as the standard Pingel® petcocks, except with brass
chrome-plated ‘Designer’ bodies. Designed for the 22mm
tanks bungs used on gas tanks since 1975 and later. Same
maximum flow rate to keep fuel at the carb where the fuel
amounts as OEM and other aftermarket petcocks.
Made in the USA. Patented . . . . . . . . . . . . . . . . .$81.75 to $83.75
Style
‘Illus. A’
Smooth
Grooved
Lightning
Diamond
Flamed
27070
27071
27072
27073
27074
‘Illus. F’
‘Illus. G’
27075
27076
27077
27078
27079
27080
27081
27082
27083
27084
Exhaust
Intake
Engine
Replacement Mounting Nut
26843 For use with these petcocks ONLY . . . . . . . . . . .$13.99
Smooth
Grooved
Lightning
Diamond
Flamed
Rebuild Kits for Reserve Valves
Complete rebuild kit is for single outlet Power-Flo™
petcocks. Includes necessary tools, photos, instructions and
parts for three fuel valves. Component kit includes necessary parts to rebuild five valves, tools are NOT included.
A 61/2" bench vise is required.
26718 Complete kit with tools and components
for 3 Pingel petcocks . . . . . . . . . . . . . . . . . . . . . . . .$50.99
26719 Components only with parts to rebuild
5 Pingel petcocks . . . . . . . . . . . . . . . . . . . . . . . . . . .$68.99
Note: Rebuild kits will not work on nipple down or dual outlet valves.
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Vacuum Petcock By-Pass Kit
By-pass the Original Equipment vacuum operated
petcock. Easy to install. Fits most Big Twin and
Sportster® models from 1998 to present
(except fuel injected models). . . . . . . . . . . . . .$19.99
25257 Complete kit
Forks
& Shocks
Sheetmetal
General
16.53
Cross
Reference
Petcocks
Chrome Replacement Petcocks
Chrome-plated duplicates of the stock gas valves used from 1975
to present. Available in three different outlet tube options,
straight down, left-hand or right-hand for applications at the
front, rear, or either side of the gas tanks. Complete with a
chromed 13/16" nut and nylon mesh filter screen.
25246 Straight down spigot (repl. OEM 62129-75T) . . . . . .$22.99
25252 Left-side spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
25253 Right-side spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
25241 Short replacement filter screen . . . . . . . . . . . . . . . . . . . .$4.19
25242 OEM replacement filter screen with reserve tube
(repl. OEM 62166-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19
12731 Replacement 3-hole Viton® seal (fits latest design
with .260" fuel tubes) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49
25241
25242
Chrome Petcocks
25246
25253
25252
These replacement petcocks are designed to provide maximum flow.
Includes filtering screen, reserve tube, and chrome plated body.
Replacement Filter Screens
260373 Fits OEM pre-1975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19
27050
25243
27051
12726
12727
25245
Sheetmetal
Chrome Petcocks
Engineered and designed to eliminate all internal O-rings. The innercore design insures
against gas leakage while providing maximum flow. Features a filter screen, reserve setting, and chrome body.
12726 Fits OEM and custom tanks thru 1974 with internal 3/8" NPT connection
(repl. OEM 62125-55B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
12727 Same fit as CC #12726 but with 90° barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
25245 Fits OEM and custom tanks 1975 thru 1982 with external 13/16" nut connection
(repl. OEM 62163-75) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.34
25243 Same fit as CC #25245 but with 90° barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.34
me
Lifeti ty
n
Warra
29104
29105
16.54
American-made high-flow petcocks feature chrome-plated
bodies and 5/16" O.D. hose barbs. Other features include a
reserve function, 100 micron filtering screens, and easy-tograsp handles. Bodies are engineered to prevent leakage, yet
deliver maximum fuel flow for high-performance applications. One of the petcocks has a swiveling banjo which
rotates 180° for custom hose routing. Fit all Original
Equipment or aftermarket tanks with 22mm bungs.
27051 Petcock with 180° rotating barb . . . . . . . . . . . . . .$82.08
27050 Petcock with straight down barb . . . . . . . . . . . . . .$64.57
EMS Ultra-Flo™ Petcocks
16
29103
Accel® High-Flow Petcocks
Delivers the highest volume flow rate on
the market. Top-quality construction. All
external parts are forged brass (billet) and
receive a triple-plate, show chrome finish.
They use a nylon filter that retains shape
better than metal and is replaceable. The
internal Teflon components eliminate the
need for rebuilding. All units are 100%
electronically factory tested. This process
assures, perfect sealing (0.5 bar), flow rate,
durability and maximum performance.
Every petcock is warrantied for life and features a new, positive stop between
the “off” and “reserve” positions.
Lifetime warranty. . . . . . . . . . . . . . . . . . . .$83.59
29103 Forward outlet
29104 Rear outlet
29105 Side outlet
Viton® Seals
for Petcocks
Viton® material eliminates the swelling
problems associated with the various fuels
available today. The 3-hole design (not
shown) fits petcocks with .260"-diameter
fuel tubes. Pack of 10. . . . . . . . . . . . . .$12.49
12728 4-hole seal
12731 3-hole seal
Petcock Covers & Tank Panels
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Dash Panel for Fat Bob Gas Tanks
Lighting
Fits Fat Bob gas tanks when dash or instruments
are not mounted on tanks. . . . . . . . . . . . . . .$24.49
26344 Plain
Electrical
Lever Covers for Pingel® Petcocks
Your fuel valve lever will be easier to find and
easier on the eyes with one of these easy-toinstall covers. Styled to match our Eclipse and
Mirage® accessory lines. Fit Pingel®-style single
outlet fuel valves only. . . . . . . . . . . . . . . . . . . .$19.99
23804 Mirage® design
23803 Eclipse design
Exhaust
‘Skull Cock’ Petcock Covers
by Skull City
Provides an ominous look as well as a better
grip on the petcock. Chrome-plated finish with
jeweled eyes. Attach with vibration-resistant
set screws. Made in the USA. Sold each.
Intake
Fit Original Equipment Petcocks
with Blade Levers
25244 Red eyes . . . . . . . . . . . . . . . . . . . . . . .$28.99
25217 Black eyes . . . . . . . . . . . . . . . . . . . . . .$28.99
Engine
Fit Pingel® 6000-Series Petcocks
25216 Red eyes . . . . . . . . . . . . . . . . . . . . . . .$30.49
25218 Black eyes . . . . . . . . . . . . . . . . . . . . . .$30.49
Gaskets
Dash Panels for Fat Bob Tanks
Fits FX and Low Rider® models with Fat Bob gas
tanks from 1977 thru 1984. . . . . . . . . . . . . . .$22.89
26348 Plain (repl. OEM 61647-77T)
310170 Replacement trim rubber . . . . . . . . .$5.79
Cheater Chrome Petcock Cover
by KüryAkyn™
Give your factory petcock a totally custom look
at a third the price of a custom replacement
fuel valve. The large hex knob promotes easy
operation. Sold each. . . . . . . . . . . . . . . . . . . . .$31.49
48245 Fits Original Equipment petcocks
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Chrome Tank Panel
Fits most models with split tanks, cast dash and
a frame-mounted seat
from 1968 thru 1999. . . . . . . . . . . . . . . . . . . . .$25.99
Forks
Chrome Tank Panel
New-style, show-chromed tank panel for Softail® & Shocks
and FXWG models from 1983 thru 1995. . .$37.99
84747 Chrome tank panel
Sheetmetal
Chrome Billet Petcock Extensions
by Jesse James
Get extra leverage and a custom look with these
petcock lever extensions. Fit Pingel® Power-Flo™
petcocks. Made in USA. Sold each. . . . . . .$35.99
16953 21/2" extension with clear ‘jewel’
16954 21/2" extension with ‘ruby’ red ‘jewel’
General
16.55
Cross
Reference
Dash Covers & Tank Panels
Mirage® Shorty Dash for Fat Bob Tanks
Ness-Tech® Chrome-Plated Dash Panels
Sheetmetal
One-piece billet dash covers extend the full length of the tank for a great
look. The gauge models include the gauge and all necessary plumbing,
and all models come with trim rubber for tight, rattle-free fit.
05678 Dash cover for Softail® models from 1996 thru 1999 . . . . . . . .$289.95
04943 Dash cover for Softail® models from 2000 to present . . . . . . . .$289.95
05679 Dash cover with gauge for Softail® models from 1996
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.95
05248 Dash cover for Softail® and 4-speed FXWG models from 1983
thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.95
05680 Dash cover with gauge for Softail® and 4-speed FXWG models
from 1983 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.95
05681 Dash cover for Dyna Wide Glide® models from 1993
to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.95
Note: Shown with CC #27131 Mirage® speedometer visor which is available separately.
‘Inferno™’ Dash Inserts for Fat Bob Tanks
before
16
Sometimes a part screams ‘Superstar’ the first time you see it. That’s how
we feel about the Mirage® Shorty dash cover. It has that perfect combination of style and class that makes the whole machine look better. The dash
is available in die-cast metal which is polished before its chrome-plated finish is applied, or in more economical chrome-plated ABS plastic. It comes
complete with mounting hardware and rubber trim to protect your tanks.
The Mirage® design scallops have black-painted recesses and double detail
lines that accent the top. Does not fit Dyna Wide Glide® models
26007 Cast Mirage® Shorty Dash Cover . . . . . . . . . . . . . . . . . . . . . . . . . .$101.49
26013 ABS Mirage® Shorty Dash Cover . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99
after
Chrome Dash Extension for Road King® Models
by Darrell Hayes Custom Concepts
A nice finishing touch for the bottom of the cast dash on Road King®
models. Fits models from 1997 to present, as well as models from 1994
thru 1996 when using a custom shorter seat. . . . . . . . . . . . . . . . . . . . . . . . .$59.99
15540 Includes mounting hardware
16.56
The Inferno™ design is now available as an insert kit for Fat Bob dashes.
Chrome-plated, die-cast metal dash inserts match the styling of the wide
range of Inferno™ accessories allowing a completely integrated custom look
from the front to the back of your bike. Complete with special adhesive
mounting system for easy installation and secure attachment. For all
Harley-Davidson® Big Twin models (except Dyna Wide Glide® models) 1968
thru 1995 equipped with Fat Bob style dash and a pre-1996 FL-style
speedometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99
27953 Short Inferno™ dash insert kit
Apparel
Bike Kits
& Trailers
Seats
& Bags
62399
Foot
Controls
Hand
Controls
27400
‘Inferno™’ Dashes
27401
62400
Lighting
Chrome-plated, die-cast metal dashes match the
styling of the wide range of Inferno™ accessories.
Available in short style for use with a traditional
tank panel or in long style. Complete with mounting hardware and rubber trim. Fit all Big Twin
Electrical
models (except Dyna Wide Glide® models) from
1968 thru 1995 equipped with Fat Bob tanks and
a pre-1996 FL-style speedometer.
27400 Short Inferno™ dash . . . . . . . . . . . . .$104.49
Exhaust
27401 Long Inferno™ dash . . . . . . . . . . . . . .$212.99
Intake
13219
Engine
62401
Gaskets
13220
Tranny
& Clutch
Doss Chrome Dashes
• Made of billet aluminum and chrome-plated
• Each dash includes 3 dash plates that feature a 5 LED, 3
LED and plain ball mill designs
• Designed to mount on Original Equipment tanks, but will
also work on custom tanks
• All necessary mounting hardware included
62399 Fits Dyna Wide Glide® models
from 1990 to present . . . . . . . . . . . . . . . . . . . . . . . . .$250.00
62400 Fits Road King® models from 1994
to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.00
62401 Fits Softail® models from 2000
to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.00
Driveline
13221
Wheels,
Tires
& Brakes
Frames
Doss Custom Dashes
These custom dash panels are American-made and formed from .100"-thick black
A.B.S. plastic which can be custom-painted to match your bike. They’ll fit all twopiece Fat Bob gas tanks and are available in three different versions.
13221 With cutouts for ignition switch and Fat Bob speedometer . . . . . . . . . . . . . . . .$50.99
13220 With 43/4" cutout for large Fat Bob speedometer . . . . . . . . . . . . . . . . . . . . . . . . . .$48.49
13219 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99
Forks
& Shocks
Sheetmetal
General
16.57
Cross
Reference
Stretched Dash for ‘Touring’
Models by Paul Yaffe Originals
This sleek fiberglass dash is a direct replacement
for your stock dash and can be cut to length.
Made extra-long for the longest
stretched tank. . . . . . . . . . . . . . . . . . . . . . . . . .$177.99
06566 Replaces the Original Equipment centerfill dash on all fuel-injected FLT and FLHT
Long ‘Mirage®’ Dash Cover
for Fat Bob Tanks
Note: Does not include gas cap and installation may require
some modifications to the gas tank
’Builders Dash’ by Dave Perewitz
Hand-formed out of 18-gauge steel and
stretched to be used on single tank or pair of
tanks. Mounting tabs can be welded on.
Can be cut to length for shorter tanks. . . .$59.99
42949 Builders dash
Die-cast dash has a chrome-plated finish.
Includes two extra-long trim pieces, a longer
trip-meter reset knob and our unique rear
hold-down. For all Big Twin models 1968 thru
1995 with two-piece Fat Bob or ‘flatside’ gas
tanks and Fat Bob speedometers (except Dyna
Wide Glide® models).
26015 Complete dash kit . . . . . . . . . . .$199.99
Replacement Parts
26001 Trim rubbers (sold in pairs) . . . . .$9.49
26003 Rear hold-down (sold each) . . . .$4.39
Stretched Dash for ‘Dressers’
05005
Sheetmetal
Ness® Custom Dashes
Custom A.B.S. plastic dashes will dress up any
bike with Fat Bob gas tanks. They come ready to
sand and paint with mounting holes pre-drilled.
05005 Fits ‘flatside’ Fat Bob gas tanks
from 1984 thru 1995 . . . . . . . . . . .$69.95
05006 Fits Fat Bob gas tanks (except flatside)
thru 1984 . . . . . . . . . . . . . . . . . . . . . .$69.95
Wish your bike had a little more style and a little
less bulk? Paul felt the same way. So he fabbed
up this sleek dash to alter the look of his FLT.
This fiberglass dash is a direct replacement for
your stock dash and can be cut-to-length. We
made it extra long for the longest stretch tank.
Add swoop to your bulky Bagger!! . . . . . .$165.99
47730 Fits all carbureted FLT, FLHT and FLHS
Note: Does not include gas cap and installation may require
some modifications to the gas tank.
13239
Lexan® Dash Kits with L.E.D’s
and VDO Speedometers
These kits are just the trick for the dressing up
your stock dash or for custom builds. They feature billet bezels with chrome or polish finishes,
a VDO electronic speedometer, super-tuff clear
Lexan® dash, late ignition style switch and L.E.D.
indicator lamps (black dash is for illustration
purposes only). Fits the flatside gas tanks fitted
to models since 1984. Dash harness plugs directly into CC #49202 electronic wiring harness.
49215 Dash kit with chrome bezel . . . .$559.99
49216 Dash kit with polished bezel . . .$539.99
Optional Accessories
49202 Complete electronic harness controller
by Thunder Heart. Replaces fuse, relay
and flasher functions (see Section 6 for
complete details) . . . . . . . . . . . . . .$369.99
49198 Interface cable for use with standard
wiring harnesses. Purchase this unit
when NOT using Thunderheart wiring
harness (CC #49202) . . . . . . . . . . . . .$28.99
Custom Dash for Stretched Tanks
16
Durable and paintable ABS plastic dashes with
unique design for custom stretched tanks.
Available with or without colored lamp lenses.
13239 With lamp lenses . . . . . . . . . . . . . . .$61.99
13238 Plain (no holes) . . . . . . . . . . . . . . . .$47.99
16.58
Apparel
Bike Kits
& Trailers
310546
Seats
& Bags
311121
Foot
Controls
Chrome Ball-Milled
Dash Covers
310547
Whether you ride an older FL,
late model Dyna or your own
custom creation, now there’s a
dash to match all your ballmilled covers and other accessories. This chrome
combination of upper and
lower panels is sure to dress up
any set of Fat Bobs and have
you cruising in style in no time.
310546 Upper dash cover. Fits all models with cast dash
from 1968 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.99
310547 Lower dash cover. Fits Softail® models from 1984
thru 1999 and FXWG from 1983 thru 1986 . . . . . . . . . . . . . . . . . .$82.99
310548 Lower dash cover. Fits all Dyna Wide Glide® models from 1993 to
present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$140.44
311131
Milwaukee Iron Stretched Steel Dashes
High quality steel dashes have necessary holes, slots and notches for a true
bolt-on installation on late models. Ready for paint or chroming. Rubber
trim strip included. Fits Big Twin models with large diameter tank mounted
speedometer.
311121 Straight. Fits FXST, FLST and FXWG models 1984-1990 . . . . . . .$264.99
311131 Tapered. Fits FXST, FLST and FXWG models 1984-1990 . . . . . . .$264.99
311122 Straight. Fits FXST, FLST and FXDWG models 1991-1995 . . . . .$264.99
311132 Tapered. Fits FXST, FLST and FXDWG models 1991-1995 . . . . .$264.99
311123 Straight. Fits FXST, FLST and FXDWG models 1996-up . . . . . . .$364.54
311133 Tapered. Fits FXST, FLST and FXDWG models 1996-up . . . . . . .$364.54
Hand
Controls
Lighting
Electrical
Exhaust
Note: Standard length dashes are a direst bolt-on replacement for the stock dash. The stretch
dashes are 23"-long (about 3" over stock length) which require cutting and fitting on the lower
end for correct seat/gas tank/dash fit.
Intake
05589
Engine
05593
05590
Gaskets
05594
Ness-Tech® Fuel Door/Tank Panel
for Dresser Models
Dress up the dash on your bike with a chromeplated billet fuel filler trap door and tank panel
from Arlen Ness®. Fuel door and dash panel
have vertical ball milled grooves. Fuel doors fit
all FLT, FLHT and FLHS models from 1989 to present, and the dash insert fits all the same models
(except Ultra Classic® models).
05143 Fuel door . . . . . . . . . . . . . . . . . . . . . . . .$74.94
05682 Lower dash insert . . . . . . . . . . . . . . . .$79.95
Tranny
& Clutch
Ness-Tech® Billet Dash Covers and Panels
Ness offers you more great-looking accessories made from chrome-plated 6061-T6 billet aluminum.
Dash covers install over the Original Equipment dashes and the lower panels cover the tanks.
For Softail® Models
Fit cast dash baseplate on models with split tanks from 1984 to present.
Grooved Flamed
05589
05591
05590
05593
05595
05594
Dash cover for models from 1984 thru 1995 . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
Dash cover for models from 1996 to present (except Deuce™ models) . . .$89.95
Lower panel for models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
For Dyna Wide Glide® Models
Fit all Dyna Wide Glide® models from 1993 to present.
Driveline
Wheels,
Tires
& Brakes
Frames
Grooved Flamed
05592
05596
Lower tank panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
Forks
& Shocks
Sheetmetal
Ness-Tech® Billet Dash Panels for Road King® Models
05146
05961
There have been few custom parts for the Road King® dash, but with these beautiful chrome-plated
billet aluminum dash covers, you get that distinguishing Arlen Ness touch that sets your bike apart
from the crowd. Fit all Road King® models from 1995 to present.
05146 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99
05961 Stepped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99
16.59
General
Cross
Reference
26188
Cateye Dash for Fat Bob Tanks
Show-chrome cateye-style dash with lenses.
Replacement lenses are sold each.
26189 Cateye dash . . . . . . . . . . . . . . . . . . . .$67.24
26356 Red replacement lens . . . . . . . . . . .$7.99
Chrome ‘Skull’ Dash
Replica of the dash cover used on 1936 thru
1938 Knuckleheads that fits the Original
Equipment dash plate. Also for 1939 thru 1946
models when used with CC #26190 dash base.
For installation on standard Fat Bob tanks used
1947 thru 1984, use CC #26498 dash base
(will not work with ‘flatside’ tanks). . . . . . .$66.79
26166 Chrome ‘Skull’ dash
25972
Two-Light and Three-Light
Dashes for Fat Bob Tanks
Classic Cast Dashes
Heavy-duty zinc die-cast dashes are beautifully chrome-plated duplicates of their Original Equipment counterparts.
Complete in every detail, each dash also includes the lenses, light divider, and trim rubbers. May be installed on
most 4-speed frames and Softail® models when the
appropriate dash base
is used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.49
26187 Fits all models 1968 thru 1990
(replaces OEM 71241-68B)
26186 Fits all models with self-cancelling turn
signals from 1991 thru 1995 (except Dyna
Wide Glide® models) replaces OEM
71241-91
Show-chrome dash covers complete with lenses
and trim rubber. Replacement lenses and trim
rubber also available separately.
26188 2-light dash . . . . . . . . . . . . . . . . . . . .$70.49
25972 3-light dash . . . . . . . . . . . . . . . . . . . .$63.49
26180 Replacement trim rubber . . . . . . . .$4.99
Sheetmetal
Replacement Parts
These pieces will fit Original Equipment dashes as well as
the dashes listed above.
26239 Lens kit: Includes lenses, divider and hardware . . . . . .$15.49
26240 Trim rubbers (pair) replaces OEM 71295-68 . . . . . . . . . . .$4.99
26238 Cast dash mounting plate . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
16
Custom Dash Cover
Rubber Dash Trim
Trimlok Dash Trim
Easy-to-install, while providing style and protection. Genuine Trimlok steel reinforced vinyl trim
is cut to length to fit all stamped steel two and
three-light dashes. Available in pre-cut 27 inch
and 10 foot lengths in plain black.
26181 Black (27"-long) . . . . . . . . . . . . . . . . .$4.99
26241 Black (10 feet-long) . . . . . . . . . . . .$10.99
16.60
This handy item is designed to replace the rubber dash trim on 1987 thru 1994 FXR models and
the nacelle trim on 1987 thru 1994 FLHS models.
The trim is also a perfect match for Custom
Chrome® Rick Doss ABS dashes and many other
protective uses.50"-long. . . . . . . . . . . . . . . . . .$5.09
This custom dash cover has had the indicator
lights and switch hole removed for a clean custom look. Designed for use with large diameter
FL style speedometer and Fat Bob® tanks. Perfect
for custom FX and FL applications with remote
mounted indicator lights and ignition switches.
Fits all Big Twin 4-speed models.
310146 Dash only
(fits all two-light base plates) . . .$48.49
Apparel
Chrome Dash Kit for Softail® Models
27454
Complete kit includes chrome dash, name plate, lens kit, speedometer back, speedometer seal, mounting
bracket, ignition switch with keys, dash trim, and hardware. Fits all Softail® models with electronic speedos
from 1996 thru 1999.
27454 Complete dash kit (repl. OEM 71254-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99
Bike Kits
& Trailers
Components
27453 Dash panel kit includes dash, lens kit, dash trim and nameplate . . . . . . . . . . . . . . . . . . . . . . .$69.99
27455 Lens kit includes lens and lens divider (repl. OEM 71146-94) . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
27456 Name plate (repl. OEM 71302-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19
27458 Dash mounting bracket (repl. OEM 67260-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
27457 Speedometer back (repl. OEM 672171-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
27462 Speedometer seal for Dyna Wide Glide® models from 1993 to present, Softail® models
from 1996 thru 2000 and Road King® models from 1994 to present (repl. OEM 67190-89) . . .$4.19
27463 Chrome ignition switch with keys (repl. OEM 71313-96) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
27464 Chrome 1/4"-20 hex acorn nut (repl. OEM 7497) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Trim Rubber for Low Rider® Dash
Thick style, black rubber trim for FX dual gauge
housings. Neatly fills the open space between
the tanks and the instrument housing while isolating the gauges from vibration. . . . . . . . . .$9.49
Dash Switch Decal
Fits FL models from 1968 thru 1984, FX models
from 1971 thru 1972, FXWG models from 1980
thru 1986, and Softail® models from 1984 thru
1999. Sold in pack of 5. . . . . . . . . . . . . . . . .$10.99
310136 Replaces OEM 71300-79
Intake
Chrome Dash Kit
All the chrome parts in one convenient kit to
help you convert to the dash used on several
models 1977 thru 1984. Will not work with
flatside gas tanks. . . . . . . . . . . . . . . . . . . . . .$55.99
91339 Complete kit
Engine
Gaskets
Tranny
& Clutch
Chrome Steel Dash Panel
and Filler Strips
Driveline
Covers the gap between gas tanks on 1984 and
earlier models. Attaches with rubber mounting
band and clips. Sold each.
310505 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49
Wheels,
Tires
& Brakes
Steel Chrome Dash for FX Models
Skull Lower
Tank Panel
Multiple skull design cast
from an original hand
carved mold. . . . . .$42.34
37734 Fits most Fat Bob
cast dashes
from 1965 to
present
Slotted Dash Cover
Stamped steel, chrome-plated instrument
housing for tank mounted gauges on FX
models from 1977 thru 1984. Includes thick
style tank-to-housing trim rubber and warning
light hole plugs for custom applications.
26339 Dash cover . . . . . . . . . . . . . . . . . . . . .$40.14
26338 Replacement trim rubber
(repl. OEM 61401-82) . . . . . . . . . . . .$9.49
26308 Hole plugs (pack of 10) . . . . . . . . .$20.49
Forks
& Shocks
Sheetmetal
This custom dash cover features a distinctive
slotted styling. Comes complete with indicator
lens assembly, trim rubber and mounting
hardware. Fits Big Twins with Fat Bob® tanks
thru 1995.
310178 Standard length . . . . . . . . . . . . . . .$85.99
Frames
General
16.61
Cross
Reference
Tank Panels
Ace Metal Stylized Tank Panels
Reverse-Lace Leather Tank Panel
A new line of stylized accessories. Jewelry grade
conchos decorate these billet aluminum parts.
Iron Cross and 8 Ball are glossy, baked ceramic
on a heavy metal base. 3-D Skull is a polished
nickel casting with a dark background. Handmade in the USA. Fit Big Twin models from
1983 thru 1995 (except Dyna Wide Glide® and
Road King® models) Sold each. . . . . . . . . . .$100.99
06068 3-D Skull
06069 8-Ball
06070 Iron Cross (not available in Europe)
310579 Jolly Roger
Reverse-laced trim adds the final
touch to these fine American-made
tank panels for Fat Bob tanks.
Include straps and fit Low Rider®
and Sturgis® models from 1977
thru 1984. . . . . . . . . .$44.99
25732 Sold each
27250
25915
25916
26973
25797
Discontinued
27252
Leather Tank Panels with Storage Pouch
Leather Tank Panels with Expandable Pouches
Hand-crafted black leather tank panels provide the added convenience of a storage
pouch within easy reaching distance. Top flaps are accented with nickel silver conchos
and secured with Velcro®. Pouches measure 8" x 4" and expand to over 2" deep thanks
to our unique pleated side panels with Velcro®. They fit 1968 thru 1984 4-speed FL
models, as well as all Softail® and 4-speed FXWG models 1980 to present (except FLSTC
Heritage Softail® Classic models).
25797 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99
25915 With studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.44
25916 With studs and fringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.94
Sheetmetal
American-made tank panels are constructed with a heavy
cowhide base that is water resistant. Each panel features a
nickel-silver concho and roomy pouches are made of supple
pebble-grained leather with a Velcro® closure.
27250 Fits all Dyna Glide models from 1991 to present
(except Dyna Wide Glide® models) . . . . . . . . . . . . . .$76.99
27252 Fits 1993 to present Dyna Wide Glide® models . .$69.49
26973 Fits Low Rider® and Sturgis® models from 1977
thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.99
25601
26905
Leather Tank Panels
with Chrome Studs
16
Tank Panel with Storage Pouch
Double-Laced Custom Tank Panel
Fits FXWG and Softail models with steel dash.
25787 With concho and eagle logo . . . . .$58.49
25788 With concho ONLY . . . . . . . . . . . . . .$52.49
®
16.62
Designed for use on all Softail® and 4-speed
FXWG models (except FLSTC Heritage Softail®
Classic models) from 1984 thru 1999. . . . . .$72.99
25807 Fits Softail® models using the early
two-light, three-light or Cateye dash
Feature heavy-duty leather, black vinyl welting,
and unique chrome studs. Both tank panels will
fit a variety of models with cast dashes.
25601 Fits 1968 thru 1984 4-speed FL models,
and all FXWG and Softail® models from
1980 thru 1999 (except FLSTC Heritage
Softail® Classic models) . . . . . . . . .$64.99
26905 Fits FLSTC Heritage Softail® Classic models from late 1987 thru 1999 . . . .$58.99
Dash Cover Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
Dash Replacement Parts
Sold each.
310126 Cateye dimmer switch with knob . .$9.49
Odometer Reset Cable
for FX Models
Complete odometer reset cable assembly for
all 4-speed FX models (except FXWG) 1973 thru
1984. Includes chrome knurled knob, rubber
grommet, washer, spring and flexible cable.
Fully assembled, ready to install. . . . . . . . . .$10.99
26445 Replaces OEM 67210-73T
Speedometer Adapter Kit
Foot
Controls
Hand
Controls
Used when installing FX tank mounted twin
pod gauges on pre-1985 3.5 or 5.0 gallon
Fat Bob tanks. Exacting reproduction of stock
pieces, complete set includes speedo and
tach cup brackets, hardware and the correct
rubber mounts. . . . . . . . . . . . . . . . . . . . . . .$16.99
26442 Complete kit
Lighting
Electrical
Dash Center Mounting Bolt
and Stud
Includes chrome-plated center screw with stud
and hardware. Fits Big Twins from 1947 thru
Exhaust
1967 as original part replacement or can be used
on custom applications where choke wire is not
brought through dash. . . . . . . . . . . . . . . . . . . .$10.99
26162 Sold each
Intake
Hi-Beam Indicator Lamp
Original style, multi-piece high beam indicator
lamp assembly with replaceable bulb included.
Fits FX models from 1973 thru 1974, as well as
Sportster® models from 1968 thru 1973. Can also
be used to replace the one-piece ‘throwaway’
indicator lamp used on FX models from 1975
thru 1985. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
26356
Engine
Instrument Light
Socket Assemblies
OEM style replacement light socket assemblies
include socket with wire and bulb. Available for
most Big Twins and Sportster® models 1976-up.
Sold in 5 packs.
310113 Steel, 1 wire type . . . . . . . . . . . . . . .$19.34
Gaskets
Tranny
& Clutch
310154
Chrome Dash Cover Screws
Complete 4-piece set of chrome plated, buttonhead panel screws. Fit all Low Rider® and FXEF
dashes 1977 thru 1984. . . . . . . . . . . . . . . . . .$7.99
26441 Set of 4
26352
26353
26354
Driveline
Wheels,
Tires
& Brakes
Replacement Lenses
for Fat Bob Dash Covers
Can be used to restore Original Equipment
dashes or as replacement parts for CC dashes.
Sold each.
26356 Cateye red lens-plastic . . . . . . . . . . . .$7.99
26354 3-light dash red lens
(2 used) – plastic . . . . . . . . . . . . . . . . . .$8.94
26353 3-light dash blue lens
(1 used) – plastic . . . . . . . . . . . . . . . . . .$8.94
26352 2-light dash red lens – plastic . . . . . .$7.99
310154 Cateye dash lens, green . . . . . . . . .$6.64
Frames
Chrome Skull Nut Cover
Made in the U.S.A. by Wild 1 Mfg. to cover the
hardware that holds the dash in place. Kits
include silicone for installation and red rhinestones for the eyes. Fits the cast dash on models
without a dash-mounted choke cable. . . .$19.95
19971 Sold each
Forks
& Shocks
Sheetmetal
General
16.63
Cross
Reference
Dash Mounting Plates
Late-Style Cast Dash Mounting Plate
Two-Light Dash Mounting Plate
Includes wiring and sockets.
26343 Includes circuit breaker clips: fits CC dash #26188 . . . . . . . . . . .$63.49
26191 Replacement dash base light sockets (pack of five) . . . . . . . . .$24.49
A complete mounting kit for many models with cast dashes from 1968
thru 1999 (except Dyna Wide Glide® models). Includes all the hardware and
spacers necessary to fit both the standard early-style Fat Bob tanks and the
later-style flatside Fat Bob tanks. Also included are the circuit breaker clips,
the rubber strip for mounting circuit breakers with flatside tanks, ignition
switch mounting screws, three insulated terminal studs and five light sockets with bulbs. Everything necessary for a quick and easy installation.
26238 Fits CC #’s 26186 and 26187 dashes or Original Equipment
cast dashes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
Plain Dash
Mounting Plate
Sheetmetal
Three-Light Dash Mounting Plate
25971 Fits CC dash #25972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.49
Basic mounting plate for use with
Fat Bob dash covers #25972 and
#26188 when dash lighting is not
desired. . . . . . . . . . . . . . . . . . . . . .$19.99
25235 Without dash lights
Light Divider
for 3-Light Dash
Reproduction of the hard-to-find
part used on three-light dashes fitted to models with Fat Bob tanks
from 1963 thru 1967. . . . . . .$6.49
310140
16
1947-83 Cateye and Skull Dash Mounting Plate
Early Style Base Plate Kits
26498 Fits CC or 1947-83 OEM tanks (does not fit flatside tanks).
Fits CC #’s 26189 and 26166 dash covers . . . . . . . . . . . . . . . . . . . . .$71.89
26191 Replacement dash base light sockets (pack of five) . . . . . . . . . . .$24.49
Kits include base plate, indicator light sockets, and mounting hardware.
310141 Cateye base kit for all models from 1936 thru 1946 . . . . . . . . . .$52.99
310140 Cateye base kit for all models from 1947 thru 1983 . . . . . . . . .$52.99
16.64
Note: Does not fit flat side tanks
Dash Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Dash Kit with Integral Tach
Features a 120 mph speedometer with built-in
coil driven tachometer that works with all
Harley® 12 volt systems. Kit includes speedometer, two-light chrome dash cover, base plate
with hardware, and ignition switch with keys.
310139 2:1 speedo/tach dash kit . . . . . . .$192.99
Electrical
Note: 1991-up self-canceling turn signals will not self cancel.
1991-up models use a distance counting reed switch to selfcancel turn signals. The turn signals will operate normally,
but will not self cancel.
Exhaust
Chrome Dash and Speedometer Kits
Intake
Includes a speedometer with 1989-up face, chrome dash, lenses, rubber trim, mounting hardware,
ignition switch with two keys and base plate with lights. Fit many models with Sport Bob™ and Fat Bob
tanks thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99 to $256.99
26480 2240:60 ratio for front wheel speedometer drive models with self-cancelling turn signals from
Engine
1984 thru 1995
26481 2240:60 ratio for front wheel speedometer drive models without self-cancelling turn signals
from 1984 thru 1990
26482 2:1 ratio for FL models with transmission speedometer drives from 1947 thru 1967, and
Sportster®, FX and FXR models with front wheel speedometer drives from 1973 thru 1990
Gaskets
(except Softail® and 4-speed FXWG models)
Tranny
& Clutch
310195
Chrome Die-Cast Dash Kit
for Fat Bob Tanks
310192
Kits include chrome die-cast dash with trim
rubber and lenses, speedometer, ignition
switch and base plate assembly with hardware.
Ideal for ground-up assembly or Fat Bob® tank
conversions. Available with 1:1 drive ratios.
310175 1:1 ratio kit. Fits FL models 1962-1980,
FX models 1971-1972 and FXWG
models 1980-1983 . . . . . . . . . . . . . .$172.54
Driveline
Wheels,
Tires
& Brakes
Frames
Chrome Dash and Mounting Kits
These chrome kits contain the dash mounting and trim
parts required for Fat Bob® tanks in a single, easy-to-order
package - simply choose from our great variety of large
diameter speedometers to complete the installation. Each
kit comes complete with chrome dash cover, base plate
assembly with hardware and ignition switch with keys.
310193
310194
Forks
& Shocks
Sheetmetal
Note: Not compatible with flat side tanks.
310192
310193
310194
310195
Cateye dash and mounting kit . . . . . . . . . . . . . . .$149.67
Two-light dash and mounting kit . . . . . . . . . . . .$135.99
Three-light dash and mounting kit . . . . . . . . . . .$135.99
Late-style dash and mounting kit . . . . . . . . . . . .$135.99
General
16.65
Cross
Reference
Speedometers
91717
91710
91975
Dash and Speedometer Kits with Dashplates
Complete kits with a speedometer, dash, trim, dashplate with light sockets,
and ignition switch for Softail® and 4-speed FL and FX models from 1936
thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$231.99
Note: These kits may be installed on models 1991 thru 1995 if the self-cancelling turn signal
feature is forfeited.
91710
91963
91717
91716
91975
3-light dash with 1:1 ratio speedometer
Cateye dash with 1:1 ratio speedometer
Note: Cateye dash kits will not work with ‘flatside’ gas tanks.
Sheetmetal
29515
16
29517
Inferno™ Custom Face Speedometers
The hot Inferno™ flames in chrome right on the speedo face. 110 MPH
speedometer with resetable trip odometer includes mounting kit and
rubber dampener.
27931 1:1 ratio for 4-speed FL and FX models with transmission-driven
speedometers from 1968 thru 1983. Requires a speedometer cable
with a 5/8"-18 threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.49
27933 2:1 ratio for FL models with transmission speedometer drives from
1947 thru 1967, and Sportster®, FX and FXR models with front wheel
speedometer drives from 1973 thru 1990 (except Softail® and
4-speed FXWG models). Requires a speedometer cable with
a 5/8"-18 threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.49
27934 Same as CC #27933 but reads in KPH (kilometers per hour) . . . .$81.49
27935 2240:60 ratio for all Softail® and 4-speed FXWG models from 1984
thru 1990, and 4-speed FL models with front wheel speedometer
drives from 1981 thru 1984. Requires a speedometer cable with a
12mm threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.49
27937 2240:60 ratio with reed switch for all Softail® models from
1991 thru 1995 with front wheel speedometer drives and
self-canceling turn signals. Requires a speedometer cable
with a 12mm threaded nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.14
16.66
‘Premium®’ Speedometers
Manufactured by the Original Equipment supplier and feature a quality
glass lens, and a resettable trip mileage indicator. They’re available
to fit FXLR models and most models with Fat Bob dashes from
1981 thru 1995. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99
Fits the handlebar-mounted brackets on FXLR models from 1991 thru 1994.
29513 MPH face (repl. OEM 67025-91)
Fits all Softail® and 4-speed FXWG models from 1984 thru 1990, and
4-speed FL models with front wheel speedometer drives from 1981
thru 1984. Requires a speedometer cable with a 12mm threaded nut.
29514 MPH face (repl. OEM 67027-81C)
29517 KM/H face (repl.OEM 67030-81D)
Fits all Softail® models from 1991 thru 1995 with front wheel speedometer
drives and self-canceling turn signals. Requires a speedometer cable with
a 12mm threaded nut.
29515 MPH face (repl. OEM 67027-91)
29516 KM/H face (repl.OEM 67030-91A)
Speedometers
Flamed
Carbon Fiber
Look
Apparel
U.S. Patent #4,848,154
Bike Kits
& Trailers
Seats
& Bags
310643
Foot
Controls
Hand
Controls
Flamed (RPM)
Billet Look
Sunset
Lighting
Premium Custom Face Speedometers
®
Here’s a great custom look with all the
solid engineering found in our best-selling
Premium® speedometers. Available for
most models with large Fat Bob dashes
1947 thru 1995. Feature glass lenses, resettable trip meter, mounting kit with rubber
dampener, and light socket with bulb.
2240:60 Ratio Speedometers
Fit all Softail® and 4-speed FXWG models
from 1984 thru 1990, and 4-speed FL models with front wheel speedometer drives
from 1981 thru 1984. Requires a speedometer cable with a 12mm threaded nut.
24702 Carbon fiber look . . . . . . . . .$79.99
24706 Sunset . . . . . . . . . . . . . . . . . . .$79.99
27942 Flamed . . . . . . . . . . . . . . . . . . .$79.99
310643 Flamed (RPM) . . . . . . . . . .$124.99
26733 Billet look . . . . . . . . . . . . . . . .$64.99
Note: May be installed on models from 1991 thru
1995 if the self-canceling turn signal feature is
forfeited and a pre-1991 dash cover is installed
to accommodate the odometer reset knob.
2240:60 Ratio with Reed Switch
Fit all Softail® models from 1991 thru 1995
with front wheel speedometer drives and
self-canceling turn signals. Requires a
speedo cable with a 12mm threaded nut.
24703 Carbon fiber look . . . . . . . . .$88.99
24707 Sunset . . . . . . . . . . . . . . . . . . .$88.99
27943 Flamed . . . . . . . . . . . . . . . . . . .$88.99
26736 Billet look . . . . . . . . . . . . . . . .$59.84
Fit FL models with transmission speedometer drives from 1947 thru 1967, and
Sportster®, FX and FXR models with front
wheel speedometer drives from 1973 thru
1990 (except Softail® and 4-speed FXWG
models). Requires a speedometer cable
with a 5/8"-18 threaded nut.
24705 Sunset (MPH) . . . . . . . . . . . . .$79.99
27941 Flamed (MPH) . . . . . . . . . . . .$79.99
26732 Billet look (MPH) . . . . . . . . .$64.99
Note: Installation on 1973 and later Sportster®, FX
and FXR models will require the additional purchase
of one of the custom speedometer cables listed elsewhere in this section. May be installed on models
from 1991 thru 1994 with front wheel speedo drives
if the self-canceling turn signal feature is forfeited.
Fits 4-speed FL and FX models with transmission-driven speedometers from 1968
thru 1983. Requires a speedometer cable
with a 5/8"-18 threaded nut.
24704 Sunset (MPH) . . . . . . . . . . . . .$79.99
27940 Flamed (MPH) . . . . . . . . . . . .$79.99
26731 Billet look (MPH) . . . . . . . . .$64.99
Electrical
SpeedoTach 2 for Fat Bob Dashes
Our new and improved combination speedometer and
tachometer for all large Fat Bob dashes from 1947 thru 1990.
The precision-built 120MPH speedometer is combined with a Exhaust
solid state 6000RPM electronic tachometer that accurately
tracks engine speed by reading the coil output. Both instruments are designed to withstand vibration and maintain accuracy throughout all speed ranges, and now the wiring
attaches to threaded posts on the back of the gauge.
Intake
Standard features include a glass lens, new graphics, a wiring
harness and complete mounting kit (CC #25965). . . .$131.49
27981 2:1 ratio for FL models with transmission speedometer drives from 1947 thru 1967, and Sportster®,
FX and FXR models with front wheel speedometer
Engine
drives from 1973 thru 1990 (except Softail® and
4-speed FXWG models). Requires a speedometer
cable with a 5/8"-18 threaded nut
Custom Front Wheel Speedometer Cables
Gaskets
Unique cables that permit you to combine a CC #27981
speedometer/tachometer with front wheel drive units. Cables
have a 5/8"-18 large coarse thread on the speedometer end.
LENGTH
BLACK
VINYL
STAINLESS
STEEL
381/2"
421/2"
19081 . . . . .$64.59
19095 . . . . .$28.79
n/a
13564 . . . . . .$30.49
Tranny
& Clutch
Note: CC #27981 speedometers may be installed on models from 1991 thru
1994 if the self-cancelling turn signal feature is forfeited.
Driveline
Note: These speedometers may only be installed in
conjunction with the 1991 thru 1995 cast dash or
Custom Chrome® equivalent to accommodate the
odometer reset knob.
Wheels,
Tires
& Brakes
KM/H Face Fat Bob Speedometers
These units feature quality glass lenses and resettable odometers. They fit most Fat Bob dashes, and
require speedometer cables with a 5/8"-18 thread.
Face
1:1 ratio
2:1 ratio
1936-1940
1962-1967
1968-1984
85731
85557
85729
85732 . . . . . . . . . . . . . .$67.99
85558 . . . . . . . . . . . . . .$67.99
85720 . . . . . . . . . . . . . .$67.99
KM/H Face SpeedoTachs
The same features as the speedometers listed above
with the addition of an integrated electronic
tachometer. Includes installation instructions.
85733 1:1 ratio . . . . . . . . . . . . . . . . . . . . . . .Call for Price
85734 2:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .$111.99
16.67
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Digital Speedometers
Digital Auto Calibration Speedometer and Multi-Gauge Unit
Enjoy the benefits of immediate status monitoring and the ease of a digital readout in one package.
Thanks to the latest in digital circuitry, days of bunglesome multi-gauge clusters are history. This twocolor LCD display packs the speedo, tach, voltmeter, odometer and trip odometer into one clean, custom
unit. The tach reads from 0 to 8,000 RPM with a bar graph wrapping around the outer rim and a 6,000
RPM redline. A bar graph voltmeter registers 8-18 volts to monitor the health of your charging system.
The speedometer section reads out to 180 MPH with an odometer to 199,999 miles and a trip odometer
999.9 miles. Special functions include a highest top speed and 0-60 elapsed time recall. Speedometers
use cable drives with an analog to digital conversion at the gauge. Unit incorporates a built-in reed
switch automatic turn signal self-canceling circuit for installation on the latest models. Rubber mounting
grommets and anti-vibration dampener included. Made in USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$562.49
310658 Fits models with 2:1, 1:1 and 2240:60 ratio drives (includes a front wheel drive cable)
Dakota Digital Electronic HLY-2000
Instrument for Fat Bob Gas Tanks
This electronic instrument from Dakota Digital is the first
complete engine and vehicle status system in one compact
self-contained gauge. Designed to fit in standard tank
mounted dashes, the large teal green display is easily
readable in direct sunlight and comes with a manufacturer’s
3 year warranty. Features include:
• 0-255 MPH digital speedometer
• Quick response bar graph tachometer
• Digital odometer with resettable trip feature
• Built-in turn signal indicators
• Low voltage and low oil warning indicator
• Neutral indicator
• High beam indicator
• Automatic night dimming circuitry
Each instrument includes a speed output wire for models
with self-canceling turn signals and is adjustable for tire size
and 1:1, 2:1 or 2240:60 drive ratios. Available with MPH or KPH
readout for cable or electric drive.
310663
Note: 310663 and 310664 require the purchase of the appropriate sender for
proper operation.
LOW VOLTAGE
LOW OIL
MPH Instruments
310663 Universal speedometer head. Fits all models 1947-1995
and electric driven Softail® and Road King® models
1995 to present . . . . . . . . . . . . . . . . . . . . . . .$474.29
Sheetmetal
KPH Instruments
310664 Universal speedometer head. Fits all models 1947-1995
and electric driven Softail® and Road King® models
1995 to present . . . . . . . . . . . . . . . . . . . . . . .$474.99
Sender Units
310661 Sender for cable driven models (5/8”-18 fitting)
can be remotely mounted) . . . . . . . . . . . . .$35.94
310662 Sender for electric driven models (plugs into stock
1996 to present speedo sender) . . . . . . . .$20.94
310654 Sender unit inductive pick-up sensor reads chain
sprocket teeth . . . . . . . . . . . . . . . . . . . . . . . . .$71.24
ODOMETER
TURN INDICATOR
Dakota Digital Speed Generator Interface
Use this device to re-calibrate your electronic speedometer for correct speed and
mileage readout. Simple plug-in installation and potentiometer adjusters allow quick,
easy and accurate calibration. Fits all models from 1996 to present and custom applications. Made in USA.
310669 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99
16
310669
16.68
Speedometers
1946-47
Apparel
Bike Kits
& Trailers
1936-40
Seats
& Bags
Foot
Controls
Hand
Controls
1962-67
Lighting
1968-84
Electrical
Mounting
Hardware
Included
1956-61
Exhaust
1941-45
Late 1989Up
Intake
Premium® Speedometers
Fits 4-speed FL and FX models with transmissionPremium® speedometers feature a quality
driven speedometers from 1968 thru 1983.
glass lens, resettable trip mileage indicator,
speedometer mounting kit (CC #25965), and a rub- Requires a speedometer cable with a 5/8"-18
threaded nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99
ber speedometer dampener (CC #25959).
They are available in 1:1, 2:1 and 2240:60 ratios to 26713 1936-1940 face
to fit most models with Fat Bob dashes. The wide
26715 1941-1945 face
selection of speedometer faces represents most
25975 1946-1947 face
styles 1936 to present. Combined with the ability
26717 1956-1961 face
to specify drive ratio, you can detail your
speedometer to suit the look of your bike.
26710 1962-1967 face (repl. OEM 67004-62T)
25973 1968-1984 face (repl. OEM 67004-68TB)
Fits FL models with transmission speedometer
26987 Late 1989-up face (120 mph)
®
drives from 1947 thru 1967, and Sportster , FX and
FXR models with front wheel speedometer drives 2240:60 Ratio Speedometers
from 1973 thru 1990 (except Softail® and 4-speed
Fits all Softail® and 4-speed FXWG models from
FXWG models). Requires a speedometer cable with 1984 thru 1990, and 4-speed FL models with front
a 5/8"-18 threaded nut. . . . . . . . . . . . . . . . . . .$79.99
wheel speedometer drives from 1981 thru 1984.
Requires a speedometer cable with a 12mm
26712 1936-1940 face
threaded nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.49
26714 1941-1945 face
25917 1936-1940 face
26711 1946-1947 face
25918 1941-1945 face
26716 1956-1961 face
25919 1946-1947 face
25963 1962-1967 face (repl. OEM 67064-85T)
25922 1956-1961 face
25962 1968-1984 face (repl. OEM 67087-85T)
25923 1962-1967 face
26742 Late 1989-up face (120 mph)
25924 1968-1984 face
26745 Late 1989-up face (180 km/h)
26743 Late 1989-up face (120 mph)
Note: Installation on 1973 and later Sportster®, FX and FXR
models will require the additional purchase of one of the
custom speedometer cables listed elsewhere on this page.
May be installed on models from 1991 thru 1994 with front
wheel speedometer drives if the self-canceling turn signal
feature is forfeited.
Speedometer Mounting Kit and Rubber
Speedometer Dampener
Fit all models with cast dashes from 1968 to
present. Kit includes rubber dash gasket, two
mounting pins with clips, and two grommets.
25965 Complete kit (repl. OEM 67066-76)
pack of ten . . . . . . . . . . . . . . . . . . . . . .$50.99
25959 Rubber dampener for Fat Bob
speedo-meters when used with a cast dash
on Big Twins from 1968 thru 1995
(repl. OEM 67115-91) . . . . . . . . . . . . .$5.99
Speedometer Light Sockets
Includes 12-volt bulbs. Pack of 10. . . . . . . . .$45.49
Custom Front Wheel Speedometer Cables
Unique cables that permit you to combine
our 2:1 ratio speedometers with front wheel
speedometer drive units. Cables have a 5/8"-18
large coarse thread on the speedometer end.
LENGTH
BLACK
VINYL
STAINLESS
STEEL
381/2"
19081 . .$64.59
n/a
421/2"
19095 . .$28.79
13564 . .$30.49
Speedometer Mounting Kit and Rubber
Speedometer Dampener
Fit all models with cast dashes from 1968 thru
1995. Kit includes rubber dash gasket, two mountNote: May be installed on models from 1991 thru 1995 if the
ing pins with clips, and two grommets.
self-canceling turn signal feature is forfeited and a pre-1991
dash cover is installed to accommodate the odometer reset
pack of ten . . . . . . . . . . . . . . . . . . . . . .$50.99
knob.
25959 Rubber dampener for Fat Bob speedo2240:60 Ratio with Reed Switch
meters when used with a cast dash
Fits all Softail® models from 1991 thru 1995 with
on Big Twins from 1968 thru 1995
front wheel speedometer drives and self-canceling
(repl. OEM 67115-91) . . . . . . . . . . . . .$5.99
turn signals. Requires a speedometer cable with a
12mm threaded nut. . . . . . . . . . . . . . . . . . . . .$101.49
26744 Late 1989-up face (120 mph)
replaces OEM 67027-91A
Note: This speedometer may only be installed in conjunction
with the 1991 thru 1995 cast dash or Custom Chrome® equivalent to accommodate the odometer reset knob.
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
16.69
Cross
Reference
Speedometers
Police Special Speedometers
These quality units are available in 1:1 and 2:1
drive ratios. Speedometers come with rubber
isolation kit and Late-Style threaded reset knob
stud. When used with early steel dashes, antique
reset knob is required. Reset knobs sold separately.
1:1 Ratio Speedometers (1000rpm = 60mph)
Fits FL models 1962-1980, FX models 1971-1972
and FXWG 1980-1983 with transmission drive
unit. 5/8”-18 cable fitting.
310392 Police special face . . . . . . . . . . . . . . .$66.49
2:1 Ratio Speedometers (2000rpm = 60mph)
Fits FL models 1947-1961 with transmission drive
unit and FX, or custom models 1973-1990 with
front wheel drive unit. 5/8”-18 cable fitting.
310393 Police special face . . . . . . . . . . . . . . .$66.49
Doss Speedometer Visors
Add a unique styling touch in minutes with either of these Rick Doss designs. Chrome-plated, die-cast
metal, easily installed using silicone adhesive provided. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.79
For Late Electronic Speedometers
Fit all large FL-style electronic speedometers on Road King® models from 1994 to present,
Dyna Wide Glide® models from 1995 to present and Softail® models from 1996 to present.
46381 Waterfall
46382 Slotted
For Cable-Driven Speedometers
Fit Fat Bob cable-driven speedometers used on most models from 1947 thru 1995.
46345 Slotted
Sheetmetal
Speedometer/Tachometer
16
Combination instruments feature an easy to
read 120 MPH speedo face with a solid state
electronic tachometer. Tachometer reads RPM
from 12 volt coil output. Single fire ignitions will
require tach adapter. Sold under license.
310418 2240:60 ratio. Fits FL models 1981-1984,
FXWG 1984-1986 and Softail® models
1984-1995* with front wheel drive unit.
12mm cable fitting . . . . . . . . . . . . .$127.49
Wild style and easy installation are combined
in our latest Rick Doss design. Engineered to fit
all ‘FL-style’ speedometers on 1968 thru 1996
Fat Bob-style tanks with cast dash, and late-model
electronic speedometer-equipped Softail®,
FXDWG and Road King® models. . . . . . . . . .$22.09
46176 With visor
46177 Without visor
Mounting
Hardware
Included
Light Bulb Sockets
for Fat Bob Speedometers
Replacement bulb sockets with two wires for
large FL speedos. Sold each.
84900 Metal lamp socket . . . . . . . . . . . . . . .$4.10
84901 Plastic lamp socket . . . . . . . . . . . . . .$2.80
16.70
Doss Speedometer Trim Rings
R
D
I
Rickk Doss, Inc.
Speedometer Mounting Kit and
Rubber Speedometer Dampener
Fit all models with cast dashes from 1968 to present.
Kit includes rubber dash gasket, two mounting pins
with clips, and two grommets.
pack of ten . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99
25959 Rubber dampener for Fat Bob speedometers
when used with a cast dash on Big Twins
from 1968 thru 1995
(repl. OEM 67115-91) . . . . . . . . . . . . . . . . . .$5.99
Speedometer Accessories
310754
310752
Apparel
Bike Kits
& Trailers
Seats
& Bags
27180
Foot
Controls
Hand
Controls
Lighting
310753
310756
Donnie Smith Signature Series™
Speedometer Covers
Electrical
These custom covers designed by renowned bike builder Donnie Smith
will give your speedo that “digital” look without the high cost.
310752 Fits Big Twin speedos 1968-1994 . . . . . . . . . . . . . . . . . . . . .$23.59
310753 Fits Big Twin speedos 1995 to present . . . . . . . . . . . . . . . . .$23.59
310754 Fits FXD and XL speedos 1995 to present . . . . . . . . . . . . . .$23.59
310756 Fits 21/2"-diameter mini gauges . . . . . . . . . . . . . . . . . . . . . .$19.19
Exhaust
Intake
Chrome Speedo/Tach Grill
Die-cast cover adds a custom look to
gauges. Secured with small sockethead
Engine
set screws. Fits metal-cased speedome®
ters and tachometers on Sportster ,
FX, FXR and Dyna Glide models from
1983 thru 1994 (except Dyna Wide Glide®
models). . . . . . . . . . . . . . . . . . . . . . . . . .$20.99 Gaskets
37326 Sold each
27131
‘Mirage®’ Speedometer Visors
Chrome-plated visors feature die-cast zinc construction and styling to
match other Custom Chrome® Mirage® accessories. Installs quickly and
easily with the included clear silicone adhesive.
27180 Fits all metal-cased instruments on Dyna Glide, FXR and Sportster®
models from 1983 thru 1994 (except Dyna Wide Glide® models).
Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.49
27181 Fits all FX models with dual handlebar or tank-mounted
instruments from 1973 thru 1984 (sold in pairs) . . . . . . . . . . . .$30.49
27131 Fits large Fat Bob cable-driven speedometers (sold each) . . .$17.49
27153 Fits large Fat Bob Original Equipment electronic speedometers
as used on Softail® models from 1996 to present, Road King®
models from 1994 to present and Dyna Wide Glide® models
from 1995 to present (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.59
27132 Visor and trim ring. Fits all models with cast dash and cable-driven
or electronic speedometers from 1968 to present . . . . . . . . . .$25.19
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
26707
Frames
26706
Forks
& Shocks
Speedo/Tach
Replacement Lens for
XL and FXR Models
Premium® Mounting Gaskets
This lens replaces cracked, faded, or broken original style speedometer or
tachometer lenses and is constructed of an advanced weather resistant
material that will not discolor. Installs easily by removing the old lens and
solvent-welding the new lens in place. Fits XL models 1974-1983 and FXR
models 1982-early 1983.
310145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
Foam rubber mounting gaskets are direct replacements for stock gaskets
for metal-cased instruments on Sportster®, FX, FXR and Dyna Glide models
from 1983 thru 1994. Sold each.
26706 With visor (repl. OEM 67039-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.49
26707 Without visor (repl. OEM 67104-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.89
16.71
Sheetmetal
General
Cross
Reference
Dakota Digital Speedometers
Dakota Digital HLY-5000 X and X-M Bar Mount System
Here’s the latest from one of the leaders in digital instrumentation. Designed for custom applications, this revolutionary speedometer system can be
mounted either above or below the handlebars, or can easily be attached directly to the triple trees with either a flat or 35° triple tree mount, giving you
three options instead of just one. The high contrast teal display makes the vacuum fluorescent speedometer and quick response bar graphing tachometer
easy to read, even on bright days. Along with the odometer, it has a trip odometer making it easy to keep up with the miles on your weekend rides. The
speedometer is easily calibrated to 255MPH (KPH available) and is available for either electronic or cable drive applications. This highly functional speedo
is encased in a chrome housing adding a little more shine to your scooter. Dakota Digital thinks so much of this little unit they backed it with a 2-year
manufacturer’s warranty. Mounting hardware sold separately.
Dimensions: 61/2” x 2” x 13/4” (depth)
310644 MPH speedometer/tachometer* . . . . . . . . . . . .$474.29
310645 KPH speedometer/tachometer* . . . . . . . . . . . . .$474.29
Mounting Brackets
310659 Chrome bar mounting bracket 11/4" . . . . . . . . . .$92.99
310660 Chrome bar mounting bracket 11/2" . . . . . . . . . .$97.54
310646 Chrome bar mounting bracket 1" . . . . . . . . . . . .$89.99
310647 Chrome flat triple tree mounting bracket . . . .$97.54
310648 Chrome 35° triple tree mounting bracket . . . .$101.89
310644
Sender Units
310649 Adapter for 1996-up electronic
transmission sender . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
310652 Sender unit for cable driven speedos . . . . . . . . .$43.99
310654 Sender unit inductive pick-up sensor reads chain
sprocket teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.24
310646
*Note: #310644 and #310645 require the purchase of the appropriate
sender for proper operation.
310646
310644
310647
310644
310859
Sheetmetal
310858
16
Dakota Digital Mini Speedometer
Dakota Digital Mini Tachometer
Adjustable 0-255 MPH mini speedometer mounts in a 21/16" opening.
Contains both odometer and trip odometer. Requires the purchase of
appropriate sender for proper operation. Senders listed in our full-line
catalog.
310858 21/16" Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$270.69
Readouts display RPM with 0-18,000 RPM range with 10 RPM resolution
below 10,000 RPMs and 100 RPM resolution above 10,000 RPMs. High RPM
recall. Adjustable from 1-15 cylinders. Mounts in a 21/16” opening.
310859 21/16" Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$270.69
16.72
Auto Meter Speedometers & Tachs
45050
Apparel
Bike Kits
& Trailers
Seats
& Bags
45052
Foot
Controls
Hand
Controls
Auto Meter Tachometers with Chrome Housings
®
25/8" and 33/8"-diameter electronic tachometers feature precision air-core
needle movements that are stable and accurate to 8,000 RPM. They are all
housed in chrome cases with your choice of black, white or silver face
plates, and work with single or dual fire ignitions. . . . . . . . .$307.99 to $331.79
33/8"-Diameter
45065 Black face
45066 White face
45067 Silver face
Lighting
25/8"-Diameter
45073 Black face
45076 White face
Electrical
45051
45053
Exhaust
45064
Intake
Engine
45054
45078
Auto Meter® Electronic Tachometers
Auto Meter® Electronic Speedometers
Finally, Programmable Speedometers built tough enough to bear the
Pro-Cycle™ name. The unmatched Auto Meter style, along with the benefits
from the years of Auto Meter’s racing experience, puts these units ahead of
the rest. They will work with any speed sensor as well as Harley-Davidson®
transmissions with electronic speed sensors. The bezels and cases have a
brilliant chrome finish with a choice of black, white, or silver faces.
Fluorescent red pointers round out the Auto Meter style. Look for these
features and more from the Pro-Cycle Electronic Speedometers:
• Easy, push-button recalibration while driving
• Million mile LCD odometer with resettable trip odometer
• Easy installation with only three wires
• Available in 120 mph or 160 mph configurations
• Quality chrome finish on bezels and 33⁄4" cases
• 5" models fit into a 45⁄8" opening. 33⁄4" models fit into most aftermarket
billet aluminum gauge mounts
33/4" Speedometers
45088 120mph, black face .$364.09
45089 120mph, white face $364.09
45090 120mph, silver face .$364.09
45091 160mph, black face .$364.09
45092 160mph, white face $364.09
45093 160mph, silver face .$364.09
Available with 33/4" and 5" faces in three models – standard tach, memory
tach and tach with a shift-light. Memory tach records highest RPM attained
which can be displayed by pushing the ‘recall’ switch. ‘Shift-light’ tach has
an amber light that comes on when the adjustable predetermined RPM is
reached. All tachometers use a precision air-core needle movement for
accuracy and stability. They will function on dual-fire or single-fire ignition
systems (will not work with magneto ignition).
45050 33/4"-diameter 8,000 RPM tachometer . . . . . . . . . . . . . . . . . . . .$300.09
45051 5"-diameter 10,000 RPM tachometer . . . . . . . . . . . . . . . . . . . . .$338.59
45052 5"-diameter 10,000 RPM tachometer with ‘shift light’ . . . . .$364.99
45053 33/4"-diameter 8,000 RPM memory tachometer . . . . . . . . . . .$434.39
45054 5"-diameter 10,000 RPM memory tachometer . . . . . . . . . . . . .$446.69
Accessories and Replacement Parts
45078 Cover for 5"-diameter gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.69
45061 Replacement black anodized mounting bracket for tach . . . .$60.49
45064 Replacement shock strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.39
5" Speedometers
45094 120mph, black face .$368.79
45095 120mph, white face $368.79
45096 160mph, black face .$368.79
45097 160mph, white face $368.79
Accessories
45064 Shock strap . . . . . . . . . .$21.39
45078 Cover for 5" gauges .$38.69
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Auto Meter® Fat Tach™
This specially-designed tachometer features a 5"-diameter electro-luminescent dial that glows
at night. Features an adjustable
dimmer, adjust-able shift light,
chrome housing and a see-thru
rain cover. Uses a precision aircore needle movement for accuracy and stability. . . . . . . .$396.99
42375 5"-diameter tach
16.73
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Speedometers & Tachometers
27800
Electronic and Mechanical
Tachometers are available!
45070
45071
27820
45056
Mini Gauges
These gauges feature chrome cases with
polished stainless steel bezels, strong
chrome steel mounts, rubber mount
handlebar clamps, accurate non-fluctuating indicators and 12-volt dial lights.
They measure 25/8"-wide x 21/16"-deep.
Durable housings are water and vibration-resistant. The speedometers require
cables with 12mm threaded nuts.
Sheetmetal
Speedometers ONLY
The 1:1 ratio units fit 4-speed FL and FX
models with transmission-driven speedometers from 1968 thru 1983. The 2:1 ratio units
fit 1954 thru 1972 Sportster® and K models,
and FL models with transmission speedometer drives from 1947 thru 1967. They also
fit Sportster®, FX and FXR models with front
wheel speedometer drives from 1973 thru
1990 (except Softail® and 4-speed FXWG
models). The 2240:60 ratio unit will fit
Softail® and 4-speed FXWG models from
1984 thru 1990, and 4-speed FL models with
front wheel speedometer drives from 1981
thru 1984. It may also be installed on Softail®
models from 1991 thru 1995 if the self-cancelling turn signal feature is forfeited.
310690 2240:60 ratio with MPH face . .$49.99
27800 1:1 ratio with 140 MPH face . . .$48.49
27810 2:1 ratio with 140 MPH face . . .$49.99
310417 2:1 ratio with 180 KM/H face . .$45.49
16
Speedometer Kits with Cables
These kits feature the same high-quality
speedometers listed above, and include a
speedometer cable to facilitate installation.
310434 2240:60 ratio with MPH face for
Softail® and 4-speed FXWG models
from 1984 thru 1990, and 4-speed
FL models with front wheel speedometer drives from 1981 thru 1984.
May also be installed on Softail®
models from 1991 thru 1995 if the
self-cancelling turn signal feature
is forfeited . . . . . . . . . . . . . . . . . . .$63.49
27860 2:1 ratio with MPH face for Sportster®
and K models from 1954 thru 1972,
and FL models with transmission
speedometer drives from 1947
thru 1967 . . . . . . . . . . . . . . . . . . . .$61.99
27861 2:1 ratio for Sportster®, FX and
FXR models with front wheel
speedometer drives from 1973
thru 1990 . . . . . . . . . . . . . . . . . . . .$61.99
27862 1:1 ratio for 4-speed FL and
FX models with transmissiondriven speedometers from
1968 thru 1983 . . . . . . . . . . . . . . .$61.99
16.74
45057
27807
27805
Speedometers with Resettable Odometers
The 2:1 ratio units fit 1954 thru 1972 Sportster® and K
models, and FL models with transmission speedometer
drives from 1947 thru 1967. They also fit Sportster®, FX
and FXR models with front wheel speedometer drives
from 1973 thru 1990 (except Softail® and 4-speed
FXWG models). The 2240:60 ratio unit will fit Softail®
and 4-speed FXWG models from 1984 thru 1990, and
4-speed FL models with front wheel speedometer
drives from 1981 thru 1984. It may also be installed on
Softail® models from 1991 thru 1995 if the self-cancelling turn signal feature is forfeited.
310718 2240:60 ratio with 160 MPH face . . . . .$52.99
27805 2:1 ratio with 140 MPH face . . . . . . . . . .$54.49
27807 2:1 ratio with 180 KM/H face . . . . . . . . .$54.49
Tachometers ONLY
27820 2:1 ratio for all models with mechanical
tachometers . . . . . . . . . . . . . . . . . . . . . . . . .$45.29
27821 Electronic tachometer for most models
from 1973 to present . . . . . . . . . . . . . . . .$70.49
Auto Meter® RPM-Activated
Shift Lights
Operate independently of your tachometer and
will work with either dual or single fire ignition
systems (will not work with magneto ignition).
Bright amber light is illuminated when the
engine RPM reaches a predetermined point.
The shift-point setting is determined by inserting a pre-calibrated RPM ‘pill’ module into the
unit. The pill modules are available in 200 RPM
increments.
45070 Mini Shift Light (order RPM module
separately) . . . . . . . . . . . . . . . . . . . . .$76.49
45056 Pro Shift Light with mount (order
RPM module separately) . . . . . . .$156.89
45071 RPM activation module (use with
CC #’s 45070 and 45056) . . . . . . .$146.59
45057 5,000 to 5,800 RPM pill kit . . . . . .$45.29
310738 5600-6400 RPM. RPM pill kit . . .$45.29
45058 6,000 to 6,800 RPM pill kit . . . . . .$45.29
45059 7,000 to 7,800 RPM pill kit . . . . . .$45.29
45060 8,000 to 8,800 RPM pill kit . . . . . .$45.29
Tachometer Kit with Cable
This kit features the same high-quality tachometer
listed above, and includes a tachometer cable to
facilitate installation.
27863 2:1 ratio for all models with mechanical
tachometers . . . . . . . . . . . . . . . . . . . . . . . .$58.19
Replacement Parts
16041 Handlebar gauge clamp . . . . . . . . . . . . . .$6.49
27823 12-volt bulb (twist type) box of 10 . . . .$1.25 ea
27824 12-volt bulb (push-in type)
box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.25 ea
27852 Black vinyl speedometer cable
for CC #27862 (53"-long) . . . . . . . . . . . .$16.94
19084 Black vinyl speedometer cable for CC #’s 27860
and 27861 (381/2"-long) . . . . . . . . . . . . .$15.49
310464 Black vinyl speedometer cable
for CC #310434 (381/2"-long) . . . . . . . . . .$9.49
310497 Braided steel speedometer cable
for CC #310434 (381/2"-long) . . . . . . . . .$21.49
Dyna Shift Minder System
Features billet aluminum, black and gold finished housing and trim, extended bulb life with
built-in check feature, and precise solid state
electronics in the control module. With triggering accuracy to within 1%, it is adjustable to
any of 64 settings in increments of 125 rpm. The
control module is available separately for use as
an engine speed activated switch for air shifters
or nitrous injection systems.
60779 Control module ONLY . . . . . . . . .$220.00
60780 Shift Minder system w/shift light
for all twin cylinder models . . . .$326.00
Apparel
Bike Kits
& Trailers
Seats
& Bags
606110
Foot
Controls
310426
Hand
Controls
606111
Lighting
310425
Speedometer for 1973-1984 Style
310425 Speedo with early style face. Fits FX
models 1973-1984 (except FXWG, FXST,
and FXR models) and 1973 XL models.
Replaces OEM 67020-73 . . . . . . . .$55.99
310426 Speedo with Late-Style face. Fits FX models 1973-1984 (except FXWG, FXST, and
FXR models) and 1973 XL models.
Replaces OEM 67020-73B . . . . . . .$54.49
Note: 1974-1975 FX models will require rewiring from stock
stator drive system to new coil drive system.
310235
Electronic Mini Gauges by D&S
Performance/VDO®
The same high-performance accuracy found in
all VDO gauges, now available through D&S
Performance in a mini size. Feature polished
stainless steel housings with backlit faces and
lighted pointers. There is even a single-fire
ignition option for the tachometer. Made in the
USA to fit most aftermarket 25/8" gauge
mounts.
23131 Mini tachometer . . . . . . . . . . . . . . . . .$147.79
23134 Mini speedometer . . . . . . . . . . . . . . .$157.64
23132 Mounting kit for stock handlebar risers on
Sportster®, FX, FXR, Softail® and Dyna
Glide models from 1974 thru 1995 . .$42.24
23133 Tachometer adapter for use with D&S
Electronic Tachometer and single fire
ignitions and coils . . . . . . . . . . . . . . . . .$22.99
27825 VDO replacement bulbs (pack of 4) .$7.99
Electrical
Cycle Opts Riser Sets
These chromed, billet aluminum risers are the
ones to choose when fighting the instrument
mounting blues on 11/4"-diameter handlebars.
They utilize Dakota Digital 21/16" mini speedometers and tachometer for a perfect match
(CC #’s 310858 and 310859). Risers are available
in a straight pullback design or a bullet-shaped
design with a 6" pullback and a 33/4" rise. The
speedometer and tachometer function switches
are located on the backsides of the risers just
below the handlebars for a clean, custom look.
Fit 11/4" handlebars ONLY. . . . . . . . . . . . . . .$349.99
606110 Straight riser set
606111 Bullet riser set
Speedometer
for XL and FXR
Models 1974-1983
Designed around our popular 21/2" diameter mini gauges, these kits
include instrument, chrome mounting bracket (without visor), chrome
gauge cup, rubber grommet and hardware. Available for most Big Twin
and Sportster® models from 1973 to present. An optional mounting
bracket with visor is also available.
Original style replacement
speedo and tach for XL and
FXR models 1974-1983. . . . . . . . . . . . . . . . . . .$92.14
310235 Speedometer. Fits XL models 1974-1983
and FXR models 1982-early 1983.
Replaces OEM 67020-75D
Instrument Kits
310300 Speedometer, 2:1 MPH . . . . . . . . . . . .$57.49
310302 Speedometer, 2240:60 MPH . . . . . . . .$65.21
310301 Speedometer, 2:1 KPH . . . . . . . . . . . . .$57.49
310304 Tachometer, coil driven . . . . . . . . . . . .$86.32
27827
Intake
Engine
Note: Mini speedometers not included
21/2" Mini Instrument Kits
Replacement Parts
310231 Single instrument bracket . . . . . . . . . .$10.99
310217 Rubber grommet . . . . . . . . . . . . . . . . . .$3.49
310201 Chrome cup, cable drive . . . . . . . . . . . .$9.49
310202 Chrome cup, electric drive . . . . . . . . . . .$9.49
Exhaust
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
310304
Frames
310226
310228
Single Instrument Mini
Gauge Kits
VDO® Electronic Tachometer
8000 rpm tachometer is small enough to fit most
in-dash fairings. Also works great in custom
applications. Measures 21/16"-diameter. . .$135.49
27827 Sold each
Forks
& Shocks
Mounts on the stock handlebar top
clamp/riser. Ideal for FXWG and FXST
models without factory tachometer or
custom speedo applications. Kits come
complete with instrument, mounting
bracket and necessary hardware.
310228 Speedometer kit. Fits FX and XL models 1973-up
with front wheel drive units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.99
310226 Tachometer kit (coil driven) for all models with 12 volt system . . . . . . . . . . . . . . . . . . . . . . .$81.49
310225 Bracket only (works with most mini gauges) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
310464 Replacement black vinyl speedometer cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
16.75
Sheetmetal
General
Cross
Reference
27818
27817
RevTech® Computerized Tachometer/Speedometer
with Multi-Function Display
Why have a separate speedo, tach, shift light, and stop watch when one unit will do it
all! Built-in microprocessor chip gives you complete control through a single button.
Speed, odometer and trip odometer displays in MPH or KPH. Works with Original
Equipment and aftermarket electronic speedo sensors. Includes wiring harness and user
manual. Fits Original Equipment and aftermarket tachometer mounts for 1983 thru 1994
gauges, although we recommend the use of the mounts listed below. . . . . . . . . . .$647.49
Note: If installing these units on pre-1995 models not equipped with electronic speedometer sensors, we recommend the use of a CC #49209 sensor unit which installs on the rear axle and picks up the signal for the
speedometer from the rear pulley/sprocket bolts.
27815
27811
27813
27814
Sheetmetal
VDO® Electronic Speedometers
16
All speedometers feature 120 MPH
faces with LCD odometers (except
27808
CC #27811), and can be perfectly
calibrated for just about any drivetrain combination using the stock
sending unit for electronic speedometers or the custom VDO® sender.
Different styles are available with
33/8" or 4-diameter faces, and they
all utilize an outer threaded retaining ring for secure installation in custom dash panels.
Digital Display Features:
• Speed
• Odometer
• Trip odometer
• Acceleration times (0-60 and standing start 1/4 mile)
Unit Features:
• Built-in 3-stage programmable shift lights
• Low voltage warning
• Switchable backlight with user set intensity
• Tach uses stepper motor drive for high accuracy and definition
• Peak recall
42081 White face
42080 Black face
Billet Handlebar Clamp Gauge Mounts by Yankee Engineuity
American made polished billet mounts are specifically designed for use with RevTech®
Computerized Tachometer/Speedometers. Available flat for pullback risers and angled
for straight risers on 31/2" centers. All brackets include an additional hole for the reset
button and are available with or without indicator lamps.
36396 Flat without indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$304.99
36393 35° with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.99
33/8"-Diameter Speedometers
27818 Heritage Gold with 120 MPH face . . . . . . . . . .$190.99
27817 Cockpit White with 120 MPH face . . . . . . . . . .$179.99
27816 Series 1 with 120 MPH face (not shown)
similar to Vision series but with chrome
bezel and white needle . . . . . . . . . . . . . . . . . . . .$179.99
27815 Cockpit Royale with 120 MPH face . . . . . . . . . .$190.99
27813 Vision with 120 MPH face . . . . . . . . . . . . . . . . . .$179.99
27811 Cockpit with 160 MPH face . . . . . . . . . . . . . . . . .$177.69
27808 Domed lens with 120 MPH white face . . . . . .$189.99
4"-Diameter Speedometers
27814 Vision with 120 MPH face . . . . . . . . . . . . . . . . . .$203.99
Accessories and Replacement Parts
27809 Amp connector, plugs into speedometers . . . . .$7.79
27822 Custom mounting kit . . . . . . . . . . . . . . . . . . . . . . .$17.79
27812 Custom sending unit . . . . . . . . . . . . . . . . . . . . . . . .$75.49
27826 Wiring kit (includes terminals) . . . . . . . . . . . . . . .$18.69
27825 VDO replacement bulbs (pack of 4) . . . . . . . . . . .$7.99
16.76
Digital Speedometer by MSB
This beautiful digital speedometer mounts on the left
side of the rear cam cover. There are four control lights
integrated in the polished aluminum casing of this instrument. Its features include trip and riding time on the illuminated displays. You can easily program all functions
while the instrument keeps mounted. . . . . . . . . . . . .$359.59
86885 Speedometer kit
26721
26720
Bike Kits
& Trailers
Tachometer and
Speedometer
Sigma Sport
‘Targa’ Computer
The Sport Targa computer
features:
• Speed up to
300kmh/183mph
• Trip distance accurate
to 10 m / 0.01 mile
• Average speed
• Actual speed
• Maximum speed since
last reset
• Total distance up to
99999 km / miles
• Stopwatch with auto start/stop function
• Clock, mph = 12 h, km/h = 24 h
It comes in a silver waterproof metal/plastic housing with
bracket, cable, sensor, magnet with casing (for assembly on
spokes) and three O-rings to mount the computer and sensor.
Front wheel sizes are adjustable by mm steps. Odometer is
resettable after battery change. Uses a 1.5-volt battery type
SR44 (D357) and measures 11,6 x 5,4mm. . . . . . . . . . . . . .$49.59
86202 Sigma ‘Sport Targa’ cycle computer
Apparel
Quality instruments for FX
models with handlebarmounted instruments from
1973 thru 1982, and FX
models with tank-mounted
instruments from 1977 thru
1984 (except FXWG, FXST). The
120mph speedometer has a light
socket, dash gasket and a mounting bracket. The tachometer includes a dash gasket and
a mounting bracket. The speedometer requires a cable with a 16mm threaded nut.
26720 Electronic tachometer (repl. OEM 92042-78A) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.29
26721 Speedometer (repl. OEM 67020-73B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.99
Seats
& Bags
Foot
Controls
Hand
Controls
310436
Lighting
310424
Electrical
Exhaust
Intake
Sigma Sport Mini
Speedo Unit
1984-1993 Style Speedometer and Tachometer
This high-quality digital
speedometer by Sigma Sport is
in fact, a bicycle unit, which can
be adapted for motor-cycle use,
and can be used in either miles
or kilometers mode. Multi-function, it keeps track of speed, distance, and time. Unit is not lighted, uses one
type SR44 watch battery. . . . . . . . . . . . . . . . . . . . . . . .$28.09
310316 Sold each
*Note: Speed sensor adapter required when using CC #310316 with stock
transmission sender.
Engine
Original equipment style replacement instruments for Big Twin and Sportster® models
from 1984 thru 1993. The speedometers feature 10 to 120 MPH faces and come complete
with dual light bulbs and sockets, wiring and mounting gasket. Available for handlebar
or tank-mounted applications.
Speedometers
310424 Fits 1984 thru 1993 FX, FXR and Sportster® models with riser mounted gauges,
rear reset knob and self canceling turn signals (repl. OEM 67016-86A) . . . . . .$76.74
310427 Fits 1984 thru 1993 FX, FXR and Sportster® models with riser mounted gauges
and rear reset knob (repl. OEM 67037-85A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
Tachometers
310436 Fits 1984 thru 1993 FX, FXR and Sportster® models with riser mounted gauges
(repl. OEMs 67111-85 and 67042-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99
Gaskets
Tranny
& Clutch
Driveline
26705
Wheels,
Tires
& Brakes
26708
Forks
& Shocks
Handlebar-Mounted Tachometer Kit
Sigma Bike Computer Illumination Light
Illumination light kit for all types of bike computers on the
market. It mounts on the handlebar beside the computer
without any tools. Features a waterproof plastic housing with
a mounting O-ring and 3-volt battery (type CR2032). . . .$18.89
86203 Sigma bike computer Illumination light
Kit includes our Premium® tachometer, chrome gauge-mounting bracket with visor and
chrome instrument cup. Complete with gasket, spacers and chrome buttonhead hardware. Fits models with short or straight risers.
26708 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
Premium® Tachometer
6200 RPM tachometer is a direct replacement for the Original Equipment part
on Sportster® models from 1985 thru 1993. It may also be installed on Sportster®
and Big Twin models from 1983 thru 1993.
26705 Premium® tachometer (repl. OEM 67111-85) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$145.99
19100 Chrome tachometer cover (repl. OEM 67112-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.96
Frames
16.77
Sheetmetal
General
Cross
Reference
686337
686340
MMB ’Micro Mini’
Electronic Tachometers
Sheetmetal
MMB ‘Micro Mini’
Electronic Speedometers
Latest technology, made in Europe.
The smallest speedometers (48mm)
on the market with analog display
for speed readout and an LCD display to display time, total or trip distance. Available with blue or white
illumination on your choice of black
or white faces, and simple to operate. Only available with 0-220 km/h
faces. To be used in OEM-applica686340
tions as well as in aftermarket installations (with RevTech® 5-speed and
6-speed transmissions).
686336 White face with white illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.90
686811 White face with blue illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686335 Black face with white illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.90
686812 Black face with blue illumination for OEM hall sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686343 White face with white illumination for OEM reed sensor (sensor sold separately) . . . . . . .$159.90
686813 White face with blue illumination for OEM reed sensor (sensor sold separately) . . . .Call for price
686342 Black face with white illumination for OEM reed sensor (sensor sold separately) . . . . . . . .$159.90
686814 Black face with blue illumination for OEM reed sensor (sensor sold separately) . . . . .Call for price
686338 White face with white illumination, brackets, and ABS plastic cover
(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.90
686806 White face with blue illumination, brackets, and ABS plastic cover
(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686337 Black face with white illumination, brackets and ABS plastic cover
(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.90
686807 Black face with blue illumination, brackets and ABS plastic cover
(hall and reed sensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686339 Black face with white illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . . . . .$225.00
686810 Black face with blue illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . .Call for price
686340 White face with white illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . . . . .$225.00
686809 White face with blue illumination, cover, brackets, and push buttons . . . . . . . . . . . . . . .Call for price
686341 Reed sensor with 3 magnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.09
All speedometers listed
above are available in
kilometer per hour only.
16
16.78
This innovative design made in Europe, and is
the perfect match to our micro speedometers.
These are the smallest tachometers on the market at just 48mm in diameter, and are available
in 8000 RPM or 12000 RPM versions, and all of
them come with chrome housings and blue illumination. . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686815 8000 RPM white face/single fire ignitions
686816 8000 RPM white face/dual fire ignitions
686817 12000 RPM black face/single fire ignitions
686818 12000 RPM white face/dual fire ignitions
686819 12000 RPM black face/dual fire ignitions
Polished Billet Housing
for 48mm MMB Speedos by MW
This cup works in conjunction with all of our
MW gauge brackets and mounts (CC #’s 686801
thru 686804 and 86299 thru 86302). It accommodates the two button switches... one of which is
the set switch and the other is the operation
switch for the electronic speedometer. The simple 2-wire hookup exits the housing at the bottom rear. The set switch resides in the bottom of
the gauge cup conforming to its bullet shape,
while the operation switch is located on the
right-side of the cup, facing the rider.
686800 Gauge cup ONLY (sold each) .Call for price
686000 Stainless steel button switch
with 2-wires (sold each) . . . . .Call for price
686001 Stainless steel button switch
with 1-wire (sold each) . . . . . .Call for price
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
MMB ’Micro Mini’ Electronic Tachometers
The smallest electronic tachometer gauges available on the market. These
tachs feature a diameter of only 1.9" (48mm), scale up to 8,000 RPM or
12,000 RPM and a 12-volt dial light. The perfect match to our ‘Micro Mini’
speedometers which can be found on page 16.82. They fit most models and
include a mounting bracket. Available with chrome-plated or black-coated
housings. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.99
MMB ’Micro Mini’ Tachometers for Single-Fire Ignitions
All of the same features as the standard ‘Micro Mini’ tachometers but
now available for single-fire applications. These tachometers eliminate
the need to connect a tachometer interface between the tachometer
and the ignition module. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99
For Standard Ignitions
Face
Chrome
Plated
Black
Coated
Black
*27467
86021
White
*85025
86175
Aluminum 86177
86176
86062 Replacement bulb, 12V
1.2W (sold each) . .$4.99
Hand
Controls
For Single-Fire Ignitions
Face
Chrome
Plated
Black
Coated
Black
86025
86024
White
86027
86026
Aluminum
86023
86022
86062 Replacement bulb, 12V
1.2W (sold each) . .$4.99
Lighting
Electrical
* Reads to 12000 RPM
Exhaust
Ratio
1:1
1:1
1:1
2:1
2:1
2:1
2:1
2240:60
2240:60
86062
Face
Chrome
Plated
Black
Coated
Black MPH
27471 . . .$100.89
n/a
Black KM/H
27470 . . .$100.89
n/a
White KM/H
84821 . . .$100.89
n/a
Black MPH
27473 . . .$100.89
n/a
Black KM/H
27472 . . .$100.89
86030 . . .$108.99
White KM/H
84820 . . .$100.89
86166 . . .$108.99
Aluminum KM/H 86167 . . .$101.79
86029 . . .$108.99
Black MPH
27474 . . .$100.89
n/a
Black KM/H
27469 . . . .$85.49
n/a
Replacement bulb, 12V 1.2W (sold each) . . . . . . . . . . . . . . . .$4.99
MMB ’Micro Mini’ Cable-Driven Speedometers
These high-quality units are made in Europe and are the smallest speedometers on the market at only 1.9" (48mm) in diameter. They’re available with
brushed aluminum, black or white faces with chrome-plated or black-coated housings, and have resettable odometers. The MPH speedometers have faces
that read from 0-120 MPH, and the KP/H speedometers read from 0-220 KP/H.
Applications
1:1 Ratio Fit 4-speed FL and FX models with transmission-driven speedometers from 1968 thru 1983.
2:1 Ratio Fit FL models with transmission-driven speedometers from 1947 thru 1967, and Sportster®, FX and FXR models with front wheel speedometer drives
from 1973 thru 1990 (except Softail® and 4-speed FXWG models). May also be installed on Sportster®, FXR and Dyna Glide models with front wheel
drive speedometers from 1991 thru 1994 if the self-canceling turn signal feature is forfeited.
2240:60 Fit all Softail® and 4-speed FXWG models from 1984 thru 1990, and 4-speed FL models with front wheel speedometer drives from 1981 thru 1984.
May also be installed on models from 1991 thru 1995 if the self-canceling turn signal feature is forfeited.
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
16.79
Cross
Reference
’Micro Mini’ Indicator Light Units
Only 1.9" (48mm) in diameter for bikes without dash panels or stock indicator lights. They’re available with square symbols and black or white face or with
round symbols and black face and housing. They feature high beam, oil pressure, turn signal, and neutral lights. Include mounting brackets.
Face
Chrome Plated
Black Coated
Black
White
84829 . . . . . . . . . . . . . . . . . . . . .$82.39
84830 . . . . . . . . . . . . . . . . . . . . .$82.39
86028 . . . . . . . . . . . . . . . . . . . . .$90.49
86174 . . . . . . . . . . . . . . . . . . . . .$90.49
Custom Cable-Driven Mini Speedometers
Sheetmetal
Custom mini speedos with 60mm cases, made in Germany. They’re available
with chrome-plated or black-coated housings, and include a 12-volt bulb
and mounting bracket. Other options include a black, white or aluminum
KM/H face and a variety of drive ratios.
16
Applications
1:1 Ratio Fit 4-speed FL and FX models with transmission-driven speedometers from 1968 thru 1983.
2:1 Ratio Fit FL models with transmission-driven speedometers from 1947
thru 1967, and Sportster®, FX and FXR models with front wheel
speedometer drives from 1973 thru 1990 (except Softail® and
4-speed FXWG models). May also be installed on Sportster®, FXR
and Dyna Glide models with front wheel drive speedometers
from 1991 thru 1994 if the self-cancelling turn signal feature is
forfeited.
310367
Speedometer Reset Knobs
These chrome reset knobs feature knurled edges for
easy adjustment and come with mounting screw.
Fits Softail® models from 1990 thru 1995.
310365 Sold each
(repl. OEMs 67215-89 and 67117-85) . . . . . . .$3.49
Fits dash mounted speedometer on
FXR 1986-1993, FXRS 1988-1992,
FXSB & FXEF 1985 only and
Dyna Glides 1991-1992.
310367 Bag of 10
(replaces OEM 67122-85) . . . . . . . . . . . . . . . . . .$21.49
310365
16.80
Ratio
1:1
1:1
2:1
2:1
2:1
86062
Face
Chrome
Plated
Black
Coated
Black KM/H
84824 . . . .$95.59
n/a
White KM/H
84827 . . . .$95.59
n/a
Black KM/H
84823 . . . .$95.59
86170 . . .$103.69
White KM/H
84826 . . . .$95.59
86171 . . .$103.69
Aluminum KM/H 86034 . . .$103.69
86033 . . .$103.69
Replacement bulb, 12V 1.2W (sold each) . . . . . . . . . . . . . . . .$4.99
310643 2240:60 ratio with tachometer. Fits FL models 1981-1984, FXWG
1984-1986 and Softail® models 1984-1995* with front wheel drive
unit. 12mm cable fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99
Chrome Gauge
Cover Set
Matched set of full-coverage chrome speedometer
and tachometer covers.
Slips easily over the stock
instrument housing and
uses existing hardware
without modification.
19090 Tach and speedo cover set for the steel-cased instruments on
Sportster®, FX and FXR models 1984 thru 1990 . . . . . . . . . . . . . .$34.49
19097 Fits the steel-cased speedometers on FX, FXR and Sportster® models
from 1983 thru 1990 (repl. OEMs 67090-85 and 67105-83) . . .$16.99
19100 Fits the steel-cased tachometers on FX, FXR and Sportster® models
from 1984 thru 1994 (repl. OEMs 67092-85 and 67112-83) . . .$18.96
Gauge Mounts
65510
Apparel
Bike Kits
& Trailers
Seats
& Bags
10247
10246
65509
Foot
Controls
T-Bar ’Micro Mini’ Gauge Mounts by Pro-One™
Hand
Controls
Chrome billet mounts provide clean installation of 48mm (17/8") ‘Micro
Mini’ speedos and tachs. Available smooth or drilled for 2 indicator lights.
Fits T-Bars with 31/2" riser-to-riser centers.
Single
65509
65511
65515
Gauge
Fits 1" or 11/4" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95
With 2 light holes, fits 1" or 11/4" diameter bars . . . . . . . . . . . . .$74.95
With 2 light holes, fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . .$74.95
Dual Gauge
65510 Fits 1" or 11/4" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
65512 With 2 light holes, fits 1" or 11/4" diameter bars . . . . . . . . . . . . .$79.95
65514 Fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
65516 With 2 light holes, fits 11/2" diameter bars . . . . . . . . . . . . . . . . . . .$79.95
Lighting
10248
10249
Electrical
10251
10250
Exhaust
Intake
Gauge Mounts for 11/4" T-Bars
Chrome-plated billet aluminum gauge mounts for T-Bars with 31/2" riser
centers. Designed to be used with the Original Equipment gauges used
from 1983 to present, and most mini gauges measuring 25/8" in diameter.
The mounts for 1995 and later gauges also come with chrome cups.
For 1983 thru 1994 Original Equipment Gauges
10248 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.69
10249 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.49
Gauge Adaptor Bracket
for T-Bars by Accutronix
Made of chrome-plated billet aluminum and designed to mount the
electronic gauge brackets from 1995 to present Dyna Glide and Sportster®
models to custom T-bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.85
44583 Fits all 11/4"-diameter T-bars that have 31/2"-centers
For 1995-Up Original Equipment Electronic Gauges
10250 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$153.39
10251 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$221.79
For 25/8"-Diameter Mini Gauges
10246 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99
10247 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.94
Note: Not for use with 883C or 1200C Sportster® models.
Chrome Gauge Mounts for T-Bars
by ‘50’s Boy’
Single or dual, mini or Original Equipment gauges,
and with or without holes for indicator lamps. They
fit most models with 1" or 11/4"-diameter T-bars.
Mounts for 1"-Diameter T-Bars
36425 Dual gauge mount without indicator lamp
holes for Original Equipment oil pressure
and voltmeter gauges . . . . . . . . . . . . . . .$203.99
Mounts for 11/4"-Diameter T-Bars
36428 Single gauge mount without lamp holes
for 25/8" mini gauges . . . . . . . . . . . . . . . .$186.99
36428
Gauge
Cups
Gauge Cups for ‘50's Boy’ Mounts
18049 Standard-style for 25/8"-diameter
cable-driven mini gauges . . . . . . . . . . . . .$85.99
36516 Teardrop-style for 25/8"-diameter
cable-driven mini gauges . . . . . . . . . . . . .$98.49
16.81
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Mix & Match Gauge Mounts
604011
604010
604012
604003
604007
604005
604001
604008
604016
604015
604009
604002
604004
Chrome Gauge Mounts and Handlebar Clamps
by Yankee Engineuity
Now you can mix and match to your desire of style with these
American-made mounts.
• Allows you to use existing hardware and stock-style indicator lamps
• Chrome-plated for the ultimate gleaming look
• Handlebar gauge mount clamps feature engraved vertical grooves and
are available ‘flat’ for pullback risers and in a 35º angle for straight risers
on 31/2" centers
• Come with or without holes for indicator lamps or light bar
• Mix and match gauge mounts and clamps
604045
604047
604043
Gauge Mounts
Gauge Mounts for 17/8" Micro Speedometers and/or Tachometers
604001 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.22
604002 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46
604046
604003 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$110.49
604004 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46
Sheetmetal
604005 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112.22
604006 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.46
Gauge Mounts for 33/8" OEM Speedometers and/or Tachometers for Models
from 1995 to Present and 33/8" VDO and Autometer Gauges
604007 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91
604008 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.69
Gauge Mounts for OEM Speedos and/or Tachs for Models from 1978 thru 1994
604009 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91
604010 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.69
Gauge Mount for 33/8" OEM Speedometers, Tachometers, VDO or Autometer
for Models from 1995 to Present and 17/8" Micro Tachs or Speedos
604011 Dual mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.63
Gauge Mount for Single RevTech® Tachometer/Speedometer (CC #’s 42080 or 42081)
604012 Single mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91
16
Gauge Mounts for Road King® Models from 1994 to present. Mount to Handlebar Clamp
Cover. Hardware and Template Included.
604013 Single mount for 17/8" micro speedo or tach . . . . . . . . . . . . . . . .$112.22
604042
Chrome Gauge Cups
604041 Fits 17/8" micro mini mechanical speedometer
or tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100.43
604042 Fits 17/8" mini electronic speedometer, tachometer
or micro mini indicator light units . . . . . . . . . . . . . . . . . . . . . . . . . .$100.43
604043 Fits 25/8" custom mini mechanical speedometer
or tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.70
604044 Fits 25/8" custom mini electrical speedometer
or tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.70
604045 Fits 33/8" VDO electronic speedometers . . . . . . . . . . . . . . . . . . . . .$153.42
604046 Fits 33/8" OEM electronic speedometer or tachometer
from 1995 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$138.54
604047 Fits RevTech® computerized tachometer/speedometer
with multi function (CC #’s 42080 or 42081) . . . . . . . . . . . . . . . .$133.39
604014 Single mount for 25/8" mini speedo or tach . . . . . . . . . . . . . . . . .$112.22
604015 Single mount for 27/8" autometer tach . . . . . . . . . . . . . . . . . . . . .$112.22
604016 Single mount for 33/8" OEM mount from 1995 to present
and autometer tach and VDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.91
16.82
604041
Mix & Match Gauge Mounts
Bike Kits
& Trailers
Gauge Mounts
Seats
& Bags
For your own unique look!
Foot
Controls
Chrome Handlebar Gauge Mount Clamps
35º Handlebar Gauge Mount Clamps for Most Models from 1974 to Present
with OEM-Style Riser (except Touring, Springer Softail® and Deuce™ Models)
604021
604022
604024
604025
604026
Apparel
604011
Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.04
Mount clamp with 5 indicator molded-in LED light bar . . . . .$236.39
Mount clamp with 4 indicator light holes . . . . . . . . . . . . . . . . . . . .$87.04
Mount clamp with 5 slotted indicator light holes
for OEM light bars from 1995 to present . . . . . . . . . . . . . . . . . . . .$89.87
Hand
Controls
Lighting
35º Handlebar Gauge Mount Clamps for Softail® Deuce™ Models from 2000 to Present
604027 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.04
35º Handlebar Gauge Mount Clamps for Springer Softail® Models from 1988 to Present
Electrical
604028 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$89.87
604029 Mount clamp with 5 indicator light holes . . . . . . . . . . . . . . . . . . . .$89.87
Flat Handlebar Gauge Mount Clamps for All Models with 1" Aftermarket T-Bars
604021
604031 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . .$121.49
Exhaust
Flat Handlebar Gauge Mount Clamps for All Models with 11/4" Aftermarket T-Bars
604032 Mount clamp without indicator light holes . . . . . . . . . . . . . . . . .$121.49
Flat Handlebar Gauge Mount Clamps for Most Models from 1974 to Present
with OEM-Style Riser (except Touring, Springer Softail® and Deuce™ Models)
604033
604034
604035
604036
604037
Mount clamp without indicator light holes . . . . . . . . . . . . . . . . . .$87.04
Mount clamp with 5 indicator molded-in LED light bar . . . . .$236.39
Mount clamp with 5 slotted indicator light holes
for OEM light bars from 1995 to present . . . . . . . . . . . . . . . . . . . .$87.04
604007
Intake
Engine
604031
Gaskets
604026
604037
604025
604036
Tranny
& Clutch
604002
Driveline
604022
604024
604035
Wheels,
Tires
& Brakes
604027
604026
604034
Frames
604022
604028
604021
Forks
& Shocks
604033
Sheetmetal
General
16.83
Cross
Reference
MW Gauge Mounts
686802
686801
MW ‘Micro Mini’ Gauge Mounts for T-Bars
686803
686804
Sheetmetal
Polished Handlebar Gauge Mounts by MW
16
These unique polished aluminum gauge holders work with all 1" handlebars and custom risers with 2-piece top clamps, to hold our popular 48mm
‘Micro Mini’ speedometers and tachometers (see pages 16.78 and 16.79).
However, the risers must be at least 2"-tall to provide the necessary clearance between the triple tree and the bottom of the gauge mount.
Available in four different designs which can be combined with our 48mm
gauge cups, and 1983 thru 1991-style indicator lamps (CC #’s 26368 thru
26371) can be used on some versions. Made in Germany.
686801 Single gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price
686802 Single gauge bracket with holes for indicator lamps . . . . .Call for Price
686803 Dual gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price
686804 Dual gauge bracket with holes for indicator lamps . . . . . .Call for Price
Polished aluminum gauge mounts that install on 1"-diameter T-Bars with
31/2" centers, and designed to use our 1.9"-diameter (48mm) ‘Micro Mini’
gauges (which can be found on pages 16.80 thru 16.82). The brackets are
O-ringed where they attach to the handlebars to absorb vibration, and you
can reuse your 1983 thru 1995 Original Equipment indicator lamps or purchase new ones (CC #’s 26368 thru 26371 – see elsewhere on this page).
Gauge cups are available separately. Made in Germany.
86304 Single gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$258.69
86305 Single gauge bracket with holes for indicator lamps . . . . . . . . .$280.69
86306 Dual gauge bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$322.49
86307 Dual gauge bracket with holes for indicator lamps . . . . . . . . . .$337.89
Gauge Cups for 48mm ‘Micro Mini’ Gauges
86303 With cable hole for mechanical speedometers . . . . . . . . . . . . . . . .$86.69
686800 Without cable hole for electronic speedometers . . . . . . . .Call for Price
86310 Without cable hole for electronic tachometers . . . . . . . . . . . . . . .$86.69
Gauge Cups for 48mm ‘Micro Mini’ Gauges
86303 With cable hole for mechanical speedometers . . . . . . . . . . . . . . . .$86.69
686800 Without cable hole for electronic speedometers . . . . . . . . .Call for Price
86310 Without cable hole for electronic tachometers . . . . . . . . . . . . . . .$86.69
Indicator Lamps
Shipped with 6"-long leads that are not terminated but include Original
Equipment-style terminals. Sold each.
26368 Green (replaces OEM 68574-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
26369 Red (replaces OEM 68489-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
26370 Amber (replaces OEM 67864-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
26371 Blue (replaces OEM 67862-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
13217 Replacement speed nuts to fit lamps (pack of 10) . . . . . . . . . . . . . .$3.99
16.84
Billet Housing for 48mm MMB Speedos by MW
This polished cup works in conjunction with all of our MW gauge brackets
and mounts (CC #’s 686801 thru 686804 and 86299 thru 86302). It accommodates the two button switches... one of which is the set switch and the
other is the operation switch for the electronic speedometer. The simple
2-wire hookup exits the housing at the bottom rear. The set switch resides
in the bottom of the gauge cup conforming to its bullet shape, while the
operation switch is located on the right-side of the cup, facing the rider.
686800 Gauge cup ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Price
686000 Stainless steel button switch with 2-wires (sold each) . . . . . . . . .$57.29
686001 Stainless steel button switch with 1-wire (sold each) . . . . . . . . . .$74.39
MW Gauge Mounts
MW Handlebar Gauge Mounting Brackets
with Digital Speedometers
85748
85778
85779
85777
85783
86291
85782
Polished aluminum gauge mounts with integrated digital
speedometer units that mount to 1"-diameter handlebars.
These mounting brackets are available with a digital speedo
only, or to use with 1.9"-diameter (48mm) ‘Micro Mini’
tachometers (which can be found on page 16.81), as well as
with our 33/4" and 5"-diameter Auto Meter tachometers
(which can be found on page 16.75). Factory indicator lamps
can be reused from 1983 thru 1991. Each kit includes a
digital speedo and stainless steel screws (tachometers are
not included). Made in Germany.
85780 Handlebar clamp with digital speedo only . . .$286.19
85781 Handlebar clamp with digital speedo
and holes for indicator lamps . . . . . . . . . . . . . . . .$274.99
for Micro Mini tachometers . . . . . . . . . . . . . . . . .$332.39
for Micro Mini tachometers and holes
for indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . .$357.69
for 33/4" Auto Meter tachometers . . . . . . . . . . .$310.99
for 33/4" Auto Meter tachometers and
holes for indicator lamps . . . . . . . . . . . . . . . . . . . .$319.89
for 5" Auto Meter tachometers . . . . . . . . . . . . . .$310.99
for 5" Auto Meter tachometers and holes
for 25/8" Auto Meter tachometers and
holes for indicator lights . . . . . . . . . . . . . . . . . . . .$484.19
for 25/8" Auto Meter tachometers . . . . . . . . . . .$414.89
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Note: Speedometer works with wire wheels only.
MW Billet Aluminum Risers
Fits perfectly in combination with MW handlebar gauge
mounting brackets listed above. 2.36"-tall CNC machined
and polished finish. Made in Germany.
85784 Pullback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$206.89
86309 Pan Am . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$271.79
85780
86292
85781
86294
86293
86295
86298
86297
86296
86299
86300
Top Clamp Gauge Mounts and Tach Brackets
Handlebar top clamps with or without digital speedometers
and the ability to add single or dual gauge brackets for our
Micro Mini gauges. The top clamps with the flat fronts, can
accept any of the four gauge brackets listed below.
86293 Top clamp with digital speedo only . . . . . . . . . .$298.29
86294 Top clamp with digital speedo and holes
86295 Top clamp with digital speedo and flat front
edge for separate tach bracket mounting . . . .$316.99
86296 Top clamp with digital speedo and flat front
edge for separate tach bracket mounting
86297 Top clamp only with flat front edge
for separate tach bracket mounting . . . . . . . . .$182.69
86298 Top clamp only with flat front edge
for separate tach bracket mounting
86299 Single gauge bracket for Micro Mini tachs
to use with CC #’s 86295 thru 86298 . . . . . . . . .$104.89
86300 40° angled single gauge bracket for Micro Mini
tachs to use with CC #’s 86295 thru 86298 . . . . .$86.59
86301 Dual gauge bracket for Micro Mini tachs
to use with CC #’s 86295 thru 86298 . . . . . . . . .$113.39
86302 40° angled dual gauge bracket for Micro Mini
tachs to use with CC #’s 86295 thru 86298 . . . . .$96.69
Gauge Cups for Micro Mini Gauges
86303 With cable hole for speedos . . . . . . . . . . . . . . . . . .$86.69
686800 Without cable hole for electronic
speedos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
86310 Without cable hole for tachs . . . . . . . . . . . . . . . . .$86.69
86301
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
86302
16.85
Cross
Reference
Gauge Mounts
37461
19094
19099
37462
’Boob’ Gauge Mounts and Cups for T-Bars
by Carlini Design
Never be lonely again! Chrome billet gauge mounts and ’Boob’ instrument
cups fit most large diameter T-bars. Accepts the electronic gauges for models from 1995 to present.
For 11/4" T-Bars
37460 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.95
37461 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.95
For 11/2" T-Bars
37462 Single gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.95
37463 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.95
Chrome Solo Gauge Mounts
Chromed steel, instrument brackets upgrade the standard black finished
bracket on all single instrument models. Fit FX, FXR and Sportster® models
from 1983 thru 1991. Looks great when combined with CC #19097 chrome
gauge cover.
19094 Visored bracket for Sportster® and FXR models (except
FXLR and Super Glide® models) from 1986 thru 1991
(repl. OEM 67053-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
19099 Stock replacement bracket for FXE and Sportster® models with a
single gauge from 1983 thru 1985 (repl. OEM 67053-83T) . . . . .$20.09
08981
08983
with
08982
Sheetmetal
08982
Polished Aluminum Handlebar Clamps and Gauge Mounts
by Yankee Engineuity
These ball milled clamps are CNC-machined from billet aluminum and available with or without a
late-model indicator light bar provision. They fit most risers from 1973 to present, and are designed
to be combined with the gauge mounts listed below.
08981 Without indicator provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.99
08982 With indicator light bar provision (indicator light bar OEM 68789-96 not included) . . . . .$87.49
Gauge Mounts
Designed exclusively for CC #’s 08981 or 08982 handlebar clamps to mount the gauges at a 35º angle.
The dual gauge mount accepts all aftermarket 25/8"-diameter mini gauges.
08983 Dual gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190.99
16
16.86
Gauge Mounts
45083
45080
45082
Apparel
Bike Kits
& Trailers
45081
45068
45069
Seats
& Bags
Foot
Controls
45086
45085
45087
42381
42380
Indicator Lamps
Lightweight Mounting Brackets for Auto Meter Gauges
®
Polished aluminum brackets are ideal for mounting Auto Meter® tachometers and speedometers
on the top clamps of a wide variety of models from 1973 to present.
For 33/8" Dual Gauges
42380 Fits 11/4" T-bars . . . . . . . . . . . . . . . . .$134.99
42381 Fits 1" T-bars . . . . . . . . . . . . . . . . . . .$134.99
For 25/8" Mini Gauges
45080 Angled mount . . . . . . . . . . . . . . . . . . .$79.99
45081 Flat mount . . . . . . . . . . . . . . . . . . . . . .$74.99
45083 Fits Springer Softail® models . . . . .$86.99
45085 Fits 1" T-bars . . . . . . . . . . . . . . . . . . . .$87.99
45087 Fits 11/4" T-bars . . . . . . . . . . . . . . . . . .$87.99
For 33/4" and 5" Gauges
Auto Meter 33/4" tachs and speedos have the
same cup size as the 5" gauges, so the same
brackets can be used.
45068 Angled mount . . . . . . . . . . . . . . . . . . .$89.99
45069 Flat mount . . . . . . . . . . . . . . . . . . . . . .$84.99
45082 Fits Springer Softail® models . . . . .$96.99
45084 Fits 1" T-bars . . . . . . . . . . . . . . . . . . . .$98.99
45086 Fits 11/4" T-bars . . . . . . . . . . . . . . . . . .$98.99
45078 5" nylon gauge cover . . . . . . . . . . . .$38.69
Hand
These indicator lamps fit most models 1983 thru Controls
1991 and are available in four different colors.
They’re shipped with 6"-long leads that are not
terminated but include Original Equipment-style
terminals. Also for most handlebar gauge
Lighting
mounting brackets. Sold each.
26368 Green (replaces OEM 68574-86) . . .$9.49
26369 Red (replaces OEM 68489-86) . . . . .$9.49
26370 Amber (replaces OEM 67864-86) . .$9.49 Electrical
26371 Blue (replaces OEM 67862-86) . . . . .$9.49
13217 Replacement speed nuts to fit lamps
(pack of 10) . . . . . . . . . . . . . . . . . . . . . .$3.99
Exhaust
Intake
05665
Engine
05724
Gaskets
Indicator Lamps with Symbols
05664
05723
Ness-Tech Chrome T-Bar Gauge Mounts
®
Billet aluminum gauge mounts feature contemporary styling. They’re available in different versions
for most mini gauges, or the Original Equipment gauges used on most models from 1983 thru 1994.
They can be installed on 1" or 11/4"-diameter T-bars with 31/2" riser centers.
Mounts for 25/8" Mini Gauges
05723 Single mount for 1" T-bars . . . . . . .$74.95
05724 Dual mount for 1" T-bars . . . . . . . .$79.95
05962 Single mount for 11/4" T-bars . . . . .$74.95
05963 Dual mount for 11/4" T-bars . . . . . .$79.95
These are Original Equipment parts. Used on
most models from 1994 to present and feature
printed symbols on the lenses. Great for stock
replacement or custom applications. Each lamp
comes with 6"-long leads with speed nut and
will fit most aftermarket gauge mounts also
(except MW mounts). Sold each. . . . . . . . . . .$17.39
85593 Red, oil pressure (repl. OEM 68022-92)
85595 Green, turn signal (repl. OEM 68021-92)
85597 Blue, high-beam (repl. OEM 68023-92)
85599 Green, neutral switch (repl. OEM 68024-92)
Mounts for Original Equipment Gauges
05665 Single mount for 1" T-bars . . . . . . .$79.95
05664 Dual mount for 1" T-bars . . . . . . . .$84.95
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Mounts for 17/8" Mini Gauges
Forks
& Shocks
Sheetmetal
General
16.87
Cross
Reference
Speedometer Accessories
310370
Rubber Speedo Cable Boot
Adapter Device for
MW Digital Speedometers
Billet Aluminum Speed Sensor
Upgrade the stock plastic transmission speed
sensor with this billet beauty. Add some style
to your speed. Fits all Big Twin models from
1996 to present. . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
49208 Replaces OEMs 74420-94, 74437-96)
Designed to use all MW handlebar clamps with
digital speedo on all models from 1995 to present with electronic driven speedometer. Just
plug onto the sensor and connect the leads to
the speedo. Useful also when changing your
rear wheel diameter or belt pulley. This device
works with the most of the digital speedometers
on the market as well. . . . . . . . . . . . . . . . . . .$226.69
85786 Adapter device
Fits all models with front wheel speedometer
drive units. Also fits many models using upper
boot. Replaces OEM 66996-85T. Sold each.
310370 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
Tachometer
Block-Off Plug
Chrome plug fits Sportster® models from 1957
thru 1984.
500430 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$13.99
Electronic Speedo Sending Unit
Original Equipment sensor for all stock 5-speed
Big Twin transmissions 1996 to present. Also fits
RevTech® 5-speed Big Twin transmissions (except
RevTech® 5-speed in a 4-speed case). . . . . .$79.99
Billet Aluminum Rear Wheel
Speed Sensor
This rear wheel speed sensor is made from polished aluminum and clamps to the left rear axle
spacer and ‘counts’ the pulley bolts to provide a
‘pulse’ for programmable VDO electronic
speedometers. . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
49209 Custom rear wheel sensor
Sheetmetal
Antique Speedometer Knobs
16
Reproduction of the thin stem odometer reset
knob for Big Twin speedometers. Ideal for steel
two-light, three-light or Cateye dashes. . .$22.99
25964 Bag of ten
25974
Electronic Speedometer
Recalibration Unit
This unit recalibrates the pulses from the sending unit so the speedometer will read correctly.
The unit plugs in line between the pickup sensor
and the speedometer using factory plugs. It fits
all models from 1994 to present with electronic
speedometers. CC #58318 is recommended when
any of our RevTech® 6-speed or 5-speed gear
sets are used in combination with the stock OEM
electronic speedometer. . . . . . . . . . . . . . . . . .$109.99
58318 Speedometer recalibration unit
16.88
25958
Speedometer Sensor Cover
by Alley Custom Motorcycles
Made of chrome-plated aluminum to cover the
electronic sensor on top of the transmission. Fits
Softail® models from 1996 to present, Road King®
models from 1994 to present, and Dyna Glide
models from 1995 to present. . . . . . . . . . . . . .$22.09
19193 Sold each
Speedometer Knobs and Screws
Chrome knurled knob and screw sets for large
dash-mounted Fat Bob speedometers. Sold in
packs of 10.
25958 Fits all Softail® models 1990 to present
(replaces OEM 67215-89) . . . . . . .$33.79
25974 Fits all 4-speed Big Twins and Softail®
models from 1968 thru 1989 (replaces
OEMs 67215-68, 67217-68) . . . . . .$30.99
Speedometer Cables & Accessories
Front Wheel Drive Speedometer Cables
See Chart
Works on Big Twin and Sportster® models with front
wheel speedometer drive unit with metal cased handlebar
or dash mount twin gauge speedometers (Type “C”).
Stock Length: 39"
Fits: FX models 1973-early 1978, FXR, FXLR 1986-1994,
1985 FXSB, and 1973 XL models. Replaces OEMs 67051-73
and 67078-85A
Stock Length: 43"
Fits: XLS late 1984-1985, 1985 FXRT, FXRS-SP and FXRSCON 1987-1994. Replaces OEM 67048-83A
Stock Length: 45"
Fits: FXRT 1984 and 1986-1992, 1986 FXRD and 1983 XLS.
Replaces OEM 67054-83B
Apparel
Bike Kits
& Trailers
Seats
& Bags
16 - 1mm Nut
Spring or Metal
Cable Style
39"
45"
Speedo
Type*
310463
C
43"
Standard Black
Foot
Controls
$9.49
Steel Braided
310495
310498
310491
$21.49
$21.49
$21.49
Front Wheel Drive
Speedometer Cables
Hand
Controls
C
Lighting
See Chart
Works on Big Twin and Sportster® models with front wheel
speedometer drive unit and Late-Style large diameter dash
mounted speedometers (Type “A”), aftermarket mini
speedometers (Type “D”), or plastic handlebar mounted
speedometers (Type “E”).
Stock Length: 39"
Fits: XL models 1974-1983, FXWG 1984-1986, FXST models
1984-94, FXRS 1988-94, Dyna Glide models 1991-94, FLT
models 1980-1985, 1986 FLTC, FLHT and FLHTC 1987-94,
and 1995 FLHT/C/U/I. Replaces OEMs 67051-74, 67024-84A,
67038-84, 67186-88, 67060-87A and 67072-79A
Stock Length: 331/2"
Fits: FL models 1981-1984, FLTC, FLHS 1987-94, 1995 FLTC-U
and 1996 FLTCU-I. Replaces OEMs 67026-81 and 67072-87B
Stock Length: 391/2"
Fits: XLS 1979-1982 and FXR, FXRS 1982-early 1983.
Electrical
12 - 1mm Nut
Cable Style
331/2"
Standard Black 310473
Steel Braided
Exhaust
Spring or Metal
371/2"
39"
391/2"
43"
45"
Speedo
Type*
A, D, E
310474
310464
310475
310465
310466
$9.49
$9.49
$9.49
$9.49
$9.49
$9.49
310493
n/a
310497
n/a
310494
310496
$21.49
$21.49
$21.49
$21.49
A, D, E
Engine
26825
Gaskets
26824
Chrome Speedo
Block-Off Plug
Chrome plug is used
to seal the transmission
when the speedo drive
unit is removed. Fits 4-speed Big Twins 1936-1983.
Includes chrome plate, gasket and screw. . .$6.49
500433 Sold each
310383
Intake
310384
Tranny
& Clutch
26823
Driveline
Wheels,
Tires
& Brakes
26730
Custom Front Wheel
Speedometer Drive Kits
Chrome Speedo Drive Covers
Puts the speedometer drive on the front wheel
instead of the transmission. Kits are for use
with 16" or 21" front wheels and 2240:60 ratio
speedometers on 4-speed FXWG and FL models
models from 1973 thru 1980 (or custom bikes
built with these front end components). The
complete kits include correct spacers, drive ring
and speedometer drive unit.
Complete Kits
26737 For 16" front wheels . . . . . . . . . .$150.69
26738 For 21" front wheels . . . . . . . . . . .$75.99
Replacement Drive Units ONLY
26819 For 16" front wheels . . . . . . . . . . .$44.99
Transmission Speedometer
Drive Units
310383 11-teeth for FL models from 1936-early
1961 (repl. OEM 67130-36) . . . . . . .$29.04
310384 13-teeth for FL models from 1962 thru
1967 (repl. OEM 67130-62) . . . . . . .$27.99
26730 23-teeth for FL models from 1969 thru
1980, FX models from 1971 thru 1972
and FXWGs from 1980 thru 1983
(repl. OEM 67130-69T) . . . . . . . . . . . .$30.49
092941 Gasket (pack of 10) . . . . . . . . . . . . . . .$4.19
The perfect finishing touch for a chrome front
end. Designed to clear the Original Equipment
blackrubber cable boot. . . . . . . . . . . . . . . . . . .$21.49
26823 Fits 4-speed FXWG, Dyna Wide Glide®
and Softail® models from 1984 thru
1995 as well as all FLT, FLHT and FLHS
26824 Fits Sportster®, FX, FXR and Dyna Glide
models with 35mm or 39mm front forks
1984 thru 1994, as well as 1983 XR-1000
26825 Fits all Sportster®, FX and FXR models
with 35mm front forks (except XR-1000)
from 1973 thru 1983, 4-speed FL models
from 1981 thru 1984 and 1982 thru 1986
FLT and FLHT models
16.89
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Speedometer Cables & Accessories
Speedometer and Tachometer Cables
Sheetmetal
Front Wheel Speedometer Cables
Fits all FX 1973 thru 1985 (except FXWG, FXST);
1984 thru 1992 FXRS (except Sport Edition,
Convertible, FXRT and Low Rider® models with
tank-mounted instruments); XLH and XLCH
1973 only; XLX 1983 thru 1985 and XLH 1984
thru 1985. Also fits Sportster® models from
1986 thru 2003 (replaces OEMs 67051-73,
67052-78A) 401/4"
19082 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
13573 Stainless steel . . . . . . . . . . . . . . . . . . . .$23.54
Fits 1983 thru 1985 XLS; 1984 thru 1993 FXRT
and FXRS Sport Edition or Convertible models;
1973 thru 1985 FX (except FXWG, FXST) with
2" to 4" over stock length forks (replaces
OEM 67054-83) 46"
19083 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
13575 Stainless steel . . . . . . . . . . . . . . . . . . . .$25.54
Fits all front wheel driven CC mini-speedos
and mini-speedo kits. Also fits XLH and XLCH
1974-1983 and 1984 thru 1993 FXWG, FXST
and FXSTC (replaces OEMs 67051-74, 67024-84
and 67038-84) 381/2"
19084 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
13571 Stainless steel . . . . . . . . . . . . . . . . . . . .$22.74
Fits 1982-1983 FXR and 1979-1982 XLS plus any
of the applications for CC #19084 with 2" to 4"
over stock length forks, including CC mini gauges
(replaces OEM 67060-79A) 40"
19085 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
13577 Stainless steel . . . . . . . . . . . . . . . . . . . .$27.69
Fits same applications, including CC mini gauges,
as CC #19084 but for use on bikes with 6" to 8"
over stock length forks 471/2"
27851 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.54
13578 Stainless steel . . . . . . . . . . . . . . . . . . . .$30.49
Fits FLT and FLHT models from 1980 thru 1986
(replaces OEM 67072-79) 381/4"
27920 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$17.99
Fits FL model 1937-61 (repl. OEM 67026-37) 36"
14697 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.19
Fits XLH 1973/1984-85, XLCH 1973, XLX 1983-85,
XR100 1983-84, FX 1973-78, FXB 1980-82, FXE
1973-84, FXEF 1979-84, FXR/FXLR 1986-94, FXRS
1984-87, FXS 1977-84, FXSB 1983-85 (repl. OEMs
67078-85A, 67052-78A and 67051-73) 40"
14662 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.99
14689 Stainless steel . . . . . . . . . . . . . . . . . . . .$25.39
Fits XLX/XLCH 1970-72, (repl. OEM 67051-70) 44"
14702 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.29
Front Wheel Speedo Cables Cont.
Fits FLHT/FLHTC/FLHTP 1986 (repl. OEM 6706086A) 441/2"
14674 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.99
Fits XLH883/883DLX/883 Hugger® 1991-94,
XLH1200 1993-94, XLS late 1984-85, FLHT/FLTC/
FLTCU/FLTCUI 1996 to present, FXRS Conv.
1990-94, FXRS-SP 1987-93, FXRT 1985 (repl.
OEMs 67060-96 and 67063-89) 41"
14723 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$21.19
14795 Stainless steel . . . . . . . . . . . . . . . . . . . .$39.64
FXEF 1985 (repl. OEM 67077-84 and 67077-85) 36"
14686 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$11.29
Fits FL models 1981-84, FLHS 1987-94 FLST 198690, FLSTC 1987-95, FLSTF 1990-95, FLSTN 1993-95,
FLTC 1987-91, FLTCU 1989-95 FLTCUI 1996, FXDBD 1992, FXDB-S 1991, FXDC 1992, FXDL 1993-94,
FXRS 1988-92 (repl. OEMs 67079-86A, 67186-88,
67072-87A/B and 67026-81) 35"
19165 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
Fits all models with 2:1 ratio speedometer and
front wheel drive, 1984 thru 1995 FXWG/FXST
(repl. OEM 78083-84) 421/2"
14684 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$14.99
Transmission Drive Speedometer Cables
27852 Fits all transmission-driven
CC mini speedometers and
mini-speedo kits 53" . . . . . . . . . . . . .$16.94
13588 Stainless, fits all transmission-driven
CC mini speedometers and
mini-speedo kits 53" . . . . . . . . . . . . .$30.49
14671 Fits FLS, XL models with mini gauge
and transmission drive
speedometer, 53" . . . . . . . . . . . . . . . .$11.29
14693 Fits FLS, XL models with mini gauge,
transmission drive, 471/2" . . . . . . . .$12.49
14694 Stainless, fits FLS, XL models with mini
gauge, transmission drive, 471/2" .$30.49
14695 Chrome, fits FLS, XL models with mini
gauge, transmission drive, 471/2" .$17.69
14664 Fits XL w/Fat Bob tanks 1954-72,
FL/FLH 1962-80, FXWG 1980-83, FX
1971-75 w/transmission drive (repl.
OEM 67026-62) 36" . . . . . . . . . . . . . .$11.29
19086 Fits all 1962-1980 FL models, 1971-1972
FX models and 1980-1983 FXWGs, as well
as 1954-1972 Sportster® models when
using CC #25575 one-piece Fat Bob tank.
Can be used with any of CC’s large dashmounted 1:1 speedometers
(repl. OEM 67026-62) 351/8" . . . . . .$15.49
Speedometer Extension
3" extension helps clear brake calipers and eliminate kinks. Speedo rubber boot sold separate.
59111 3" speedo extension . . . . . . . . . . . . . .$7.19
59116 5" speedo rubber boot . . . . . . . . . .$13.39
Tachometer Cables
Fits all XL 1974-1980 and FL 1961-1969 with
distributor drive. Also fits CC #’s 27820 and
27863 mini tachometers and mini-tach kits
(replaces OEMs 92065-74T, 92062-65A) 32"
27850 Black vinyl . . . . . . . . . . . . . . . . . . . . . . .$15.49
13585 Stainless steel . . . . . . . . . . . . . . . . . . . .$22.29
Custom Front Wheel
Speedometer Cables
Unique cables that permit you to combine any
of our large 2:1 ratio Fat Bob speedometers with
front wheel speedometer drive units. Each cable
is complete with two cable-to-speedo head nuts,
and a specially-designed flared cable end to fit
either the FL (5/8"-18 large coarse thread) or
1982-up (16 x 1.0mm) metal cased speedometers
fitted to Sportster®, FX and FXR models.
LENGTH
BLACK
VINYL
STAINLESS
STEEL
381/2"
421/2"
19081 . .$64.59
19095 . .$28.79
n/a
13564 . .$30.49
Choke Cables
Replacement black vinyl choke cables.
14700 Fits XL 1988-91, FLST/FXST 1990-97, FLHT
1990-97, FXRS/T 1990-92, FXDL/FXDWG
1993-97, FLHR 1994-97, FLHT 1995-97, FX
1995-97 (repl. OEMs 29236-90, 29229-88A,
29229-88) . . . . . . . . . . . . . . . . . . . . . . . . $9.94
14722 Fits FLTC 1980-89, FLHT 1983-87, FXRS
1982-89, FLHTC 1983-89, FLHTCU 1989,
FLHS 1987-89, FXRP 1984-88, FLHTP
1984-88, FLT 1980-83, FXRC 1985/87,
FXRD 1986, FXRDG 1984, FXLR 1987-89,
FXR 1982-83/86-89, FXRS-SP 1985-89,
FXRT 1983-89 (repl. OEMs 29209-86,
29225-79) . . . . . . . . . . . . . . . . . . . . . . . . $9.94
Speedometer Cable Nuts
Replacement speedometer cable nuts
for Big Twins and Sportsters®. Handy for
cable customers who aren’t sure if they
have American or metric instrument fittings. Zinc plated. Pack of 5. . . . . .$6.49
310485 American nut, 5/8"-18 threads.
Fits most large diameter tank
mounted speedometers
310320
310323
Chrome Clutch Cable End Covers
16
These die-cast trim pieces cover the unfinished fitting on clutch cables with
brilliant chrome. Die-cast construction with set screw fastener. Sold each.
310320 Upper for all models from 1982 to present . . . . . . . . . . . . . . . . . .$16.99
310323 Lower for Big Twins (except FXR models) 1987 to present . . . .$18.49
16.90
Speedometer Drive Units
Apparel
.600"
.375"
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
310388
310334
Hand
Controls
Front Wheel Speedometer Drive Units
Choose from our standard Spare Parts line or our “Pro-Stock” series of speedo drives.
.350"
Pro-Stock
Spare
Parts
n/a
310390
$36.49
310331 310387
$39.99
n/a
$36.49
310388
$36.49
Fit Information
Lighting
Fits FX, FXR, and XL models with 19" front wheel 1973-1983
(except FXWG). 2.625:1 ratio. Replaces OEM 67127-73
Fits FL models 1981-1984, FLT and FLHT models 1982-1986. 16" wheel.
2.75:1 ratio. Replaces OEM 67073-81
Electrical
Fits FXWG, FXST, and FXSTC models 1984-94 with 21" wheel. 3.0:1 ratio.
Exhaust
n/a
310389
$36.49
310389
310334
n/a
Fits FX, FXR, and XL models 1984-1994 with 19" front wheel. 2.625:1
ratio. Replaces OEM 67127-84A
Fits FXLR 1987-1994. 21" wheel. 3.0:1 ratio. Replaces OEM 67132-85A
Intake
$39.99
Engine
.300"
26725
26726
Gaskets
Tranny
& Clutch
310390
Premium® Speedometer Drive Units
Driveline
Stock replacement drive units for all models with front wheel drive speedometers from
1973 thru 1998. They work great with our 2-to-1 ratio speedometers.
26725 Fits 1973 thru 1983 Sportster®, FX and FXR models with Narrow Glide
19" front wheels (repl. OEM 67127-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
26726 Fits 1982 thru 1986 FLT and FLHT models, and 1981 thru 1984 4-speed
FL models (repl. OEM 67073-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
26723 Fits FXST, FXSTC, Dyna Wide Glide® and 4-speed FXWG models
with 21" front wheels from 1984 thru 1995 (repl. OEM 67120-84B) . . . . . . . .$39.99
26724 Fits Sportster®, FX, FXR and Dyna Glide models with Narrow Glide
19" front wheels from 1984 thru 1994 (repl. OEM 67127-84A) . . . . . . . . . . . .$39.99
26699 Fits FLHT models from 1996 thru 1998 (repl. OEM 67101-96) . . . . . . . . . . . . . .$65.99
26727 Fits FLHS and FLHT models from 1987 thru 1995, and FLT models
from 1987 thru 1998 (repl. OEM 67073-87A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
26728 Fits FXLR models from 1987 thru 1994 (repl. OEM 67132-85A) . . . . . . . . . . . . .$39.99
26729 Fits FL Softail® models from 1986 thru 1995 (repl. OEM 67125-86A) . . . . . . .$39.99
26702 Fits FX Springer models from 1988 thru 1995 (repl. OEM 67166-88) . . . . . . . .$65.99
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
310331
310387
General
16.91
Cross
Reference
Oil Tanks for Softail Models
Side Fill Oil Tanks for Softail® Models
Our great-looking tanks are available chrome-plated or raw steel for
custom paint. They incorporate all the changes from the factory over
the years, and each includes filler plug and all fittings.
Rick Doss ‘Winged’ Oil Tanks
Rick has come up with another great design to help you improve the
styling of all 1986 thru 1999 Softail® models. By filling the gap between the
tank and the frame with small ‘Wing’ extensions, the bike has a much
smoother, integrated look. Made in the USA by Santee®.
12605 Chrome tank for all Softail® models 1989 thru 1999 . . . . . . . .$279.99
12604 Chrome tank for all Softail® models 1986 thru 1988 . . . . . . . .$279.99
13614 Raw steel tank for all Softail® models 1989 thru 1999 . . . . . .$249.99
Sheetmetal
Santee® Stock Replacement Oil Tank
All the quality features of our Rick Doss tank without the ‘Wings’.
Fit all Softail® models from 1989 thru 1999. Made in the USA.
12616 Replaces OEMs 62498-89A and 62498-91 (not shown) . . . . . .$344.99
Center Fill Oil Tanks
We’ve taken our best-selling oil tanks
and moved the filler spout to the center
of the tank under the seat for even
sleeker looks. Each tank includes a threaded filler plug and all fittings.
‘Winged’ Center Fill Oil Tanks
Same quality features as our side fill tanks with the ‘Wing’ extensions that
fill the gap between the tank and frame.
12613 Chrome tank for all Softail® models 1989 thru 1999 . . . . . . .$289.99
Stock Replacement Center Fill Oil Tank
Top-quality tank without the ‘Wings’ (not shown).
12617 Chrome tank for all Softail® models 1989 thru 1999 . . . . . . .$344.99
Billet Oil Tanks for Softail®
and Twin Cam 88® Models by ‘SCS’
Side Fill ‘Winged’ Oil Tank
Center Fill ‘Winged’ Oil Tank
This chrome winged oil tank measures 12"-wide
(1/2" extra on belt side) and holds 3 quarts. Side
filler cap included. Uses Original Equipment
Softail® mounting brackets. . . . . . . . . . . . . .$336.99
This oil tank from CC is made using only the
highest quality products. Heavy gauge steel is
used to produce a strong, smooth tank with a
smooth surface. . . . . . . . . . . . . . . . . . . . . . . . . .$246.68
thru 1999 (repl. OEM 62498-89A)
16
Billet aluminum oil tanks for Softail® and
Twin Cam 88® models with decorative ball milled
grooves. Available in two versions, center fill or
side fill with old-style or new-style oil line
connectors.
Billet Oil Tanks for Standard
Softail® Frames
86606 Side fill with old-style oil line
connectors . . . . . . . . . . . . . . . . . . . . . . .$605.29
86607 Side fill with new-style oil line
connectors . . . . . . . . . . . . . . . . . . . . . . .$604.39
86608 Center fill with new-style oil line
connectors . . . . . . . . . . . . . . . . . . . . . . .$600.89
Billet Oil Tanks for Twin Cam 88® Models
86609 Side fill with old-style oil line
connectors . . . . . . . . . . . . . . . . . . . . . . .$653.69
86610 Side fill with new-style oil line connectors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$653.29
16.92
Oil Tanks for Softail Models
95326
Apparel
Bike Kits
& Trailers
95312
95309
95313
Seats
& Bags
95307
Foot
Controls
Oil Tank for Softail® Models
A perfect chrome replacement for the Original
Equipment oil tank. Fits all Softail® models from
1989 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . .$149.99
Hand
Controls
95314
95308
Lighting
95310
Raw Steel Custom Oil Tanks by Chopper Guys
Ready for primer and your own custom paint scheme and featuring your choice of internal or external
oil feed with external ribs, or built-in air cooling tubes, with either standard or ‘winged’ rear edges.
These center fill wrap around oil tanks fit Chopper Guys frames and Original Equipment Softail®
models from 1984 thru 1999. They may also be used in custom chassis applications.
Electrical
Note: Stock Softail® models from 1984 thru 1999 must notched at the frame plate for center fill hole.
Internal Feed
95307 Cooling ribs with wings . . . . . . . . .$497.84
95309 Cooling ribs . . . . . . . . . . . . . . . . . . . .$445.44
95311 Air cooled with wings . . . . . . . . . . .$681.24
95313 Air cooled . . . . . . . . . . . . . . . . . . . . . .$628.74
95320 Smooth stock style . . . . . . . . . . . . . .$337.14
95321 Smooth stock style with wings . .$399.99
95326 Same as CC #95321 but with
top mounting . . . . . . . . . . . . . . . . . .$409.99
Unpainted Oil Tank
External Feed
95308 Cooling ribs with wings . . . . . . . . .$497.84
95310 Cooling ribs . . . . . . . . . . . . . . . . . . . .$445.44
95312 Air cooled with wings . . . . . . . . . . .$681.24
95314 Air cooled . . . . . . . . . . . . . . . . . . . . . .$628.74
95318 Smooth stock style . . . . . . . . . . . . . .$337.14
95322 Smooth stock style with wings . .$389.49
Exhaust
Intake
Engine
Perfect for custom painting, this original style oil
tank features heavy gauge steel construction
and a built in battery box. May also be used on
most aftermarket Softail® frames. . . . . . . .$144.49
270148 Fits all Softail® models from 1989 thru
1999 (repl. OEM 62498-89A)
Gaskets
Tranny
& Clutch
Driveline
12006
12004
Doss ‘Winged’ Oil Tanks for Twin Cam 88® Softail® Models
These chrome oil tanks have ‘wing’ extensions at the rear to fill any gaps between the tank and the
frame. They also feature a narrower side-to-side profile that follows the frame rails for a more integrated look. The center fill version has the filler cap hidden under the seat for an even sleeker look.
They hold 31/2 quarts and fit all Softail® models from 2000 to present.
12004 Side fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
12006 Center fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$306.99
Oil Tank for Softail® Models
Formed from 14-gauge steel and tig welded for
strength. Pressure-tested, certified and shipped
complete with billet filler cap. Weld-on mounting hardware permits a custom fit to many
applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$639.99
47766 Raw steel oil tank
Frames
Forks
& Shocks
Chrome Winged Oil Tanks for Softail® Models
Our CC custom oil tank features “winged” extensions to fill the gap between
frame and oil tank. Heavy gauge steel construction with triple chrome plated
finish. Available for Softail® models from 1986 thru 1999 as well as
most aftermarket Softail® style frames.
Chrome mounting brackets are available separately. . . .$268.99
thru 1999 (repl. OEM 62498-89A)
thru 1988 (repl. OEM 62498-86A)
270160
Wheels,
Tires
& Brakes
Sheetmetal
General
16.93
Cross
Reference
Oil Tanks for Big Twin Models
Custom ‘Beveled’ Wrap-Around
Oil Tank for Big Twin Models
Smooth Wraparound Oil Tanks for Big Twin Models
These oil tanks install without fabrication and house the stock battery for FXE models. They’re available in two versions that provide you with the choice of an integrated spin-on oil filter or without.
The inner compartments are lined and let you lift out the battery without removing the tank. They
also include a convenient drain plug, chrome nipple-type hose fittings and filler caps. Each of these
three quart oil tanks will fit all 4-speed FL or FX models from 1965-early 1984 (except Softail® models).
Sheetmetal
Without Spin-On Oil Filter
12570 Chrome oil tank . . . . . . . . . . . . . . . .$259.99
12575 Black powder painted oil tank . .$245.99
With Spin-On Oil Filter
12569 Chrome oil tank . . . . . . . . . . . . . . . .$329.99
26109 Replacement chrome oil filter . . . . .$8.14
This exclusive Custom Chrome® oil tank features
an attractive decorative bevel along the upper
edge of the tank that tapers as it approaches
the center. The oil line fittings are tucked neatly
out of sight under the tank, and the 31/2 quart
capacity insures plenty of oil for any Big Twin
motor. Each tank comes with a chrome filler
plug and accepts the stock 12-volt FXE
batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.99
12566 Fits all 4-speed Big Twin models from
1965-early 1984 (except Softail® models)
Note In some stock applications it may be necessary to modify factory mounting tabs
Smooth Wrap-Around Oil Tanks
for Electric Start Big Twins
in Custom Rigid Frames
Smooth Wrap-Around Oil Tank
in Custom Swingarm Frames
Wrap-Around Oil Tanks
in Rigid Frames
Designed for use in most custom rigid frames.
They can be used with aluminum primaries and
electric starters. These oil tanks will not fit
Original Equipment rigid frames, and require CC
#15204 Battery Plate Brackets to mount fenders.
They come complete with a cap and
fittings for threaded oil lines.
12601 Chrome oil tank . . . . . . . . . . . . . . . .$219.99
5-quart oil tank designed to fit most aftermarket
custom swingarm frames when equipped with
electric start Big Twin engines and 4-speed transmissions. They will accept stock FXE batteries,
and require CC #15204 Battery Plate Brackets to
support rear fenders. Includes a cap and fittings
for oil lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.99
08932 Chrome oil tank
These 31/2 quart oil tanks feature built-in battery
boxes that accept stock FXE batteries. They fit all
Original Equipment rigid frames from 1936 thru
1957 and most custom rigid frames with either
steel or aluminum primaries. Each tank comes
complete with a cap and fittings for threaded
oil lines which will accept stock oil lines or our
custom steel-braided lines.
12600 Chrome oil tank . . . . . . . . . . . . . . .$219.99
12576 Black powder painted oil tank .$209.99
16
16.94
Oil Tanks for Big Twin Models
Apparel
Bike Kits
& Trailers
12585
Discontinued
Seats
& Bags
Foot
Controls
Hand
Controls
Oil Tanks for Kickstart Big Twins in Rigid Frames
These custom wrap-around oil tanks have a four-quart capacity and will fit Original Equipment Big
Twin rigid frames with tin primaries and kick-start only 1936 thru 1957. There are versions available
with or without an integrated spin-on oil filter in your choice of finishes. They can also be adapted to
most custom rigid frames. All tanks accept the stock tall 6-volt battery.
With Spin-On Oil Filter
12585 Chrome side fill oil tank . . . . . . . . .$310.99
12577 Black powder painted side fill
oil tank . . . . . . . . . . . . . . . . . . . . . . . .$299.99
26109 Replacement chrome oil filter . . . . .$8.14
25543 Replacement black oil filter . . . . . . .$7.04
Without Spin-On Oil Filter
12603 Chrome side fill oil tank . . . . . . . . .$219.99
12580 Black powder painted side fill
oil tank . . . . . . . . . . . . . . . . . . . . . . . .$209.99
Horseshoe Oil Tank for Big Twins
These 33/4 quart oil tanks fit all 4-speed rigid
and swingarm frames (except Softail® models)
with tin primaries but will not work on models
with aluminum primaries. They have a battery
area measuring 43/8"-wide and 53/4"-long.
Features include easy-fill side spout, an integral
‘mousetrap eliminator’ bracket, built-in battery
tray and rear fender mount.
12571 Chrome oil tank . . . . . . . . . . . . . . . . .$239.99
12574 Black powder painted oil tank . . .$229.99
Lighting
Electrical
Exhaust
270151
Intake
Engine
Gaskets
Oil Tanks for Rigid Frames
‘Winged’ Oil Tanks
for Rigid Frames
Small ‘wing’ extensions at the rear of the tank
fill any gaps between the rear fender and oil
tank. They hold 31/2 quarts and have built-in
battery boxes that accept stock FXE batteries.
Available with right side filler neck or smooth
looking center filler to fit all Original
Equipment rigid frames from 1936 thru 1957
and most custom rigid frames with either steel
or aluminum primaries. Complete with cap.
Accept most stock oil lines or custom steelbraided lines.
12807 Side fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$347.99
12808 Center fill tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$353.99
612809 Center fill tank Raw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99
Chrome original style oil tanks for rigid-framed
Big Twins. Available with side or center oil fill.
Fits Big Twin models from 1936 thru 1957.
Replaces OEM 62504-38. . . . . . . . . . . . . . . . .$148.99
270150 Side fill
270151 Center fill
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
78305
Forks
& Shocks
78301
Chrome Replacement Oil Tanks
Duplicates of the Original Equipment oil talks
finished in brilliant chrome.
78301 Fits 4-speed FL and FX Big Twin
(repl. OEM 62504-82) . . . . . . . . . .$142.95
78305 Fits 4-speed FL and FX Big Twin
models from 1965-early 1982
(repl. OEM 62504-65A) . . . . . . . .$129.99
16.95
Sheetmetal
General
Cross
Reference
Oil Tanks for Sportster® & FXR Models
12584
12581
12583
Polished Aluminum Oil Tanks
Available in 4- and 5-quart tanks or a 5-quart tank
with an integrated spin-on oil filter. Each tank
comes complete with mounting hardware and oil
line fittings. We also have an aluminum electrical
accessory box which works well with this style of
tank. The 4-quart tank fits late Sportster® models
and the 5-quart tank fits Big Twins.
12581 4 quart tank – 93/8"-long x
55/8"-diameter . . . . . . . . . . . . . . . . . .$231.99
12582 5 quart tank – 87/8"-long x
61/4"-diameter . . . . . . . . . . . . . . . . . .$243.99
12583 5 quart with filter – 87/8"-long x
61/4"-diameter . . . . . . . . . . . . . . . . . .$308.99
08943 Replacement threaded chrome
oil tank cap . . . . . . . . . . . . . . . . . . . . .$14.59
12584 Electrical accessory box (measures
approx. 61/4"-long x 61/4"-tall x
27/8"-deep) . . . . . . . . . . . . . . . . . . . . . .$89.99
26109 Replacement filter element . . . . . . .$8.14
16054 Replacement rubber mounts
(5/16"-24 x 3/4" studs on both ends)
Pack of 3 . . . . . . . . . . . . . . . . . . . . . . . .$23.14
270431 Replacement filter . . . . . . . . . . . . . . .$12.79
Wrap-Around Oil Tanks for
Electric Start Sportster® Models
Horseshoe Oil Tanks
These 31/2 quart oil tanks will accept the stock
FXE electric start battery. They fit all 1967 thru
1978 stock electric start Sportster® models, and
are adaptable to many custom frames (on 1973
thru 1978 stock frames, the removal of the rear
frame support struts may be required). They
come complete with a cap, oil line fittings, and
mounting hardware.
12599 Chrome oil tank . . . . . . . . . . . . . . . .$239.99
Feature side-fill spouts for convenience, and
have a capacity of approximately 33/4 quarts.
They include a cap, fittings, and all necessary
hardware to mount them to stock 1958 thru
1978 Sportster® frames without a battery (on
1973 thru 1978 frames, the removal of the rear
frame support struts may be required).
12572 Chrome oil tank . . . . . . . . . . . . . . . .$249.99
12579 Black powder painted tank . . . . .$239.99
Custom Oil Tank Brackets
Required when mounting
oil tanks on custom rigid or
swingarm Sportster® frames
with behind-the-transmission
single downtubes. . . . . . . . . . . . . . . . . . . . . . . .$24.49
26419 Sold each (2 required)
Custom Oil Tank Brackets
Required when mounting
oil tanks on custom rigid or
swingarm Sportster® frames
with behind-the-transmission
single downtubes. . . . . . . . . . . . . . . . . . . . . . . .$24.49
26419 Sold each (2 required)
26397
Sheetmetal
270144
Chrome Oil Tank for FXR Models
Chrome Oil Tanks
Great looking parts that add a bright splash of
chrome to the right side of Sportster® models.
Accurate reproductions of the Original Equipment parts, they replace the stock black units
perfectly. The ideal complement for our chrome
ignition module and battery covers.
12588 Fits Sportster® models from 1983
thru 1993 (repl. OEM 62475-83) . . . .$167.84
thru 1996 (repl. OEM 62475-94) . . . .$159.99
16
16.96
A complete chrome oil tank assembly for all FXR
models from 1982 thru 1990 (except 1986-up
FXR Super Glide® models). Adds sensational style
and simplifies oil draining through the addition
of a second drain hole on the left rear of the
tank. Included with the tank is a remote drain
hose fitting kit which allows it to be drained
from the kickstand side through a rubber hose
which, when not in use, plugs onto a frame
mounted dummy fitting which is included in the
kit. Machine polished and then triple chromeplated. Replaces OEMs 62406-81, 62406-86 and
62414-86.
28104 Oil tank and remote drain kit
(this tank has no oil level
"sight" glass) . . . . . . . . . . . . . . . . .$147.79
16051 Well-Nuts® blind fasteners
(repl. OEM 8099) pack of 10 . . . .$13.99
Oil Tank Mounting Kits
Includes chrome front and rear brackets to
mount oil tanks to most aftermarket and
Original Equipment Softail® frames.
26397 Complete kit . . . . . . . . . . . . . . . . . . . .$28.39
270144 Rear bracket only, chrome
(replaces OEM 62704-84) . . . . . . . . .$25.99
270147 Front bracket only, chrome
(replaces OEM 62707-84) . . . . . . . . .$10.99
For Rigid Models
Raw steel offset mounting bracket to mount oil
tanks on rigid models. Also works great to
mount rear fenders on rigid frames. . . . . . .$7.29
21015 Sold each
Custom Oil Tanks & Accessories
Apparel
Due to slight variations in hand crafting these tanks, measurements given may vary slightly.
Bike Kits
& Trailers
10"
Seats
& Bags
7"
13"
270475
270472
2"
Foot
Controls
5"
5"
Hand
Controls
Custom Oil Tank Drain Valve
9"
13"
10"
270473
43/8”
270476
71/4"
5"
Solid brass construction, then polished and
chrome plated. Ball valve with nylon seal construction insures long life and smooth operation. Installs in original oil-drain line, open-close
knob has a 1/4 turn movement. Includes built-in
mounting tab.
500933 Fits Softail® models 1989-up . . . . .$99.99
71/4"
Lighting
Electrical
Stainless Steel Oil Tanks by Nacell
Stainless steel oil tanks for a lifetime of good looks. Will not rust, peel, flake, tarnish or corrode. More
resistant to scratches and impact damage than aluminum. Hand crafted and Tig welded, then polished
to a lasting mirror finish. Tanks include threaded mounting bosses, and threaded connectors for oil
feed, return, and vent lines. Tanks also include knurled aluminum oil cap with o-ring seal.
Exhaust
Note: These tanks are all universal fit for custom applications, mounting brackets must be fabricated. Check all clearances carefully.
270472
270473
270475
270476
Octagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
Prism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
Torpedo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
Teardrop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
Intake
Aluminum Oil Tank Drain Valves
Engine
Made from ‘6061’ aluminum that has been heattreated to ‘T6’. They permanently replace the
stock drain plug and fit all stock or aftermarket
oil tanks with 5/8"-18 threads for dramatically
simpler oil changes. Attach a piece of 1/2" I.D.
Gaskets
hose to the spigot and turn counter-clockwise
with a wrench until oil flows into your catch
pan. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . .$31.49
18227 Natural finish (shown)
Tranny
18228 Black finish
& Clutch
Chrome Oil Tank Trim
This extruded, chrome oil tank trim conceals the
seams on 4-speed FL and FX models 1965-1986
(except FXST) with stock oil tank.
Replaces OEM 62534-65.
270009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
Driveline
500555
Wheels,
Tires
& Brakes
Frames
Reinforced Rubber Oil Tank
Mounting Washers by K&N
1"-diameter round rubber washers have dozens
of uses, in addition to the obvious. Allows clean
scratch-free, well-cushioned installations. Comes
on a card of 12 packs of 10. . . . . . . .$5.75 per pack
22170 Mounting washers
Oil Tank Cover Trim Kit
for ‘Touring’ Models
This trim rail kit is contoured to match the shape
of the left side (oil tank) cover on FLHT, FLT and
FLHS models from 1980 to present. It looks great
and helps prevent paint damage or scurf marks
caused by passenger’s boots. Complete with
mounting hardware. . . . . . . . . . . . . . . . . . . . . .$15.49
Drain Plug Repair Kit
Special oversized drain plug and tap to rethread stripped-out oil tank and motor case
drain holes with original 1/2"-13 threads.
Replacement oversized plugs are also available
separately.
500555 Repair kit . . . . . . . . . . . . . . . . . . . . . . .$37.99
500556 Plug only (9/16"-18) . . . . . . . . . . . . . . .$6.74
Forks
& Shocks
Sheetmetal
General
Note: installation requires drilling mounting holes in the
stock side covers.
270008 Left side trim kit (repl. OEM 66053-92)
16.97
Cross
Reference
Oil Caps & Dipsticks
27101
27100
Chrome Oil Tank Plugs with Dipstick
Chrome Oil Tank Dipsticks
Chrome-plated replacements for Original Equipment dipsticks.
27100 With short dipstick for Softail® models from 1984 to present and
Sportster® models from 1982 thru 2003
(repl. OEM 62595-82A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
27101 With long dipstick for FL models from 1970 thru 1984, FX models
from 1971 thru 1985, FXR models from 1982 thru 1983, FLT models
from 1980 thru 1986 and XLCH models from 1970 thru 1978
(repl. OEM 62625-70A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
Chrome-plated replacement oil tank plugs with dipsticks.
93914 Fits Dyna Glide models from 1991 to present
(repl. OEMs 62681-92A and 62685-95A) . . . . . . . . . . . . . . . . . . . . .$31.39
from 1993 to present (repl. OEMs 62640-93
and 62607-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.79
16050
23125
Aluminum Oil Filler Cap
by Banke Performance
Made for Buell® motorcycles with plastic oil
tanks. Keeps dirt and grit out of oil tank and
makes checking oil level easier and faster.
Includes screw on cap with brass dipstick
and instructions. . . . . . . . . . . . . . . . . . . . . . . . . .$51.54
47983 Sold each
23123
Rubber Vibration
Resistant Mounting Studs
Six Shooter Oil Cap
by Choppers Inc.
Sheetmetal
Polished billet aluminum with .44 magnum shell
casings. See matching handlebar risers in section
13 (CC #110233 thru 110235) and shift knob in
section 11 (CC #442156). . . . . . . . . . . . . . . . . . .$49.99
270110 Sold each
16
This is just the answer for custom builders. These
studs are perfect for mounting gas and oil tanks.
Sold in packs of 5 (unless otherwise noted).
16050 1/4"-20 x 1/2" stud both ends . . . .$15.49
16054 5/16"-24 x 3/4" stud both ends
(pack of 3) . . . . . . . . . . . . . . . . . . . . . .$23.14
23123 5/16"-18 stud on one end with 5/16"-18
threaded hole on the other end
(repl. OEM 50235-63) . . . . . . . . . . . .$28.99
Heavy-Duty Mounting Studs
These studs exceed OEM design standards in
tensile strength, shear resistance and sag resistance. Sold in packs of 5. . . . . . . . . . . . . . . . . .$28.99
23124 1/4"-20 x 1/2" stud at both ends
23125 1/4"-20 x 1/2" stud at one end, with
1/4"-20 x 3/4" stud at other end
Chrome Oil Tank Cap Assembly
For stock oil tanks on all 4-speed Big Twin models (except Softail® models) thru 1982 and
1967-early 1978 Sportster® models with electric
start.
12352 Replaces OEM 62610-52TA . . . . . .$27.49
25334 Oil tank gasket 1966-1982 (pack of 10)
replaces OEM 62628-66 . . . . . . . . . .$9.49
23124
Oil Tank Plug
Chrome-cap oil tank super plug
for all Original Equipment side-fill
oil tanks from 1965 to present and most custom
tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
25674 Replaces OEM 62644-84T
Rubber Mounts
Replacement rubber mount is used for mounting Harley® battery boxes and oil tanks. Made of
quality rubber with 1/4"-20 x 1/2" long threaded
studs and steel plates. This mount also works
great for mounting many custom parts.
16055 Pack of 10 . . . . . . . . . . . . . . . . . . . .$2.99 each
16.98
Oil Temperature & Pressure Gauges
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Accel® Oil Pressure Gauge
Premium quality 60 psi. oil gauge with 11/2"-diameter, four color “Thunder Twin” dial face.
Glycerin filled for vibration dampening - with
stainless steel housing, glass lens and solid brass
internals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.54
270047 Sold each
Hand
Controls
Liquid Filled Gauges
Wide selection of liquid filled gauges have a polished stainless steel bezel, chrome case, and a glass
lens in either 60-lb. or 100-lb. faces and a 270° sweep. Faces match our 1946 thru 1947 style
speedometers for FLs, and come complete with fittings.
60 Pound Gauges
18205 For Big Twins from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
18206 For Big Twins from 1970 thru 1991 (Original Equipment exhaust system with crossover
tube may interfere) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.49
18210 Replacement fittings for CC #18206 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
100 Pound Gauges
18208 For Big Twins from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
18209 For Big Twins from 1970 thru 1991 (Original Equipment exhaust system with crossover
tube may interfere) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.49
18210 Replacement fittings for CC #18209 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
Lighting
Electrical
Exhaust
Intake
Engine
V-Twin Oil Temperature Gauges
1"-diameter face is easy to read and accurately
shows oil temperatures between 50° and 350°
Fahrenheit.
19265 Fits most custom and OEM side-fill tanks
from 1965 thru 1991 except Dyna Glide,
Sportster® and Softail® models (replaces
OEMs 62635-79T, 62666-87T) . . . . .$33.49
19266 Fits Sportster® models from 1982 thru
2003 and Softail® models from 1984
thru 1999 (replaces OEMs 62668-87T,
62667-87T) . . . . . . . . . . . . . . . . . . . . . .$33.49
270046 Fits Softail® models from 2000 to present
(replaces OEM 62896-00) . . . . . . . . .$55.69
Gaskets
Tranny
& Clutch
18440
Driveline
Wheels,
Tires
& Brakes
R.O.C. Patent Pending
‘F Stick’ Oil Temperature Gauge
A machined billet aluminum digital oil
temperature gauge for Big Twins. With a range
of 14 to 240 °F and accuracy within +/- 2 °F the
°F-Stick is ideal for monitoring before and after
oil when installing an oil cooler, checking the
performance of different oils/additives or to just
keep an eye on everyday running temperature.
Made from 6061-T6 aluminum then show
chromed. Stainless steel probe. . . . . . . . . . .$86.99
and XL models from 1982 thru 2003
18446
Dash Panels with
Oil Pressure Gauges
These tank panels feature die-cast construction and integral 60 lb.
liquid-filled oil pressure gauges. They were designed to emulate the styling of
the Original Equipment cast dashes fitted to most 4-speed FL, FX and Softail®
models 1968 thru 1999. Each kit includes all of the necessary oil line, fittings and
hardware for a quick and easy installation, and fit all Softail® and
4-speed FXWG models from 1983 thru 1999.
18440 Chrome dash panel kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$123.99
18446 Black wrinkle finish kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$192.99
18442 Replacement rubber trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69
Note: These kits may also be installed on earlier 4-speed FL and FX models with Fat Bob tanks and cast dashes,
if the frames are drilled and tapped for the rear mounting screw.
16.99
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Oil Pressure Gauges & Gauge Cups
Ness-Tech® Oil Pressure Gauge
and Bracket Kit
270067
270089
Gauge not
included
Install this clean oil pressure gauge kit to keep
track of your motorcycle’s most vital fluid. The billet aluminum bracket and
gauge mounting cone are CNC-machined and then chrome-plated. The
bracket mounts to the rocker cover for easy visibility from the rider’s seat.
Each kit includes a stainless steel hose assembly, chrome hardware, and a
60-lb. gauge with chrome-plated cone and bracket.
05235 Fits all Evolution® Big Twin models from 1984 thru 1999 . . .$169.95
04919 Fits all Sportster® models from 1993 thru 2003 . . . . . . . . . . . .$164.95
Replacement Parts
05236 Stainless steel hose assembly for CC #05235 . . . . . . . . . . . . . . . .$32.95
05237 Ness 60-lb. oil pressure gauge ONLY . . . . . . . . . . . . . . . . . . . . . . .$34.95
270069
Ness-Tech® Radius
Chrome Oil Gauge
Bracket Assembly
Bottom detail
The latest Radius style features
stainless housing and glass
lens, filled with vibration
dampening glycerin for lasting
performance. Billet bracket
mounts oil pressure gauge to
the rear rocker box. Complete
kit includes Ness® 60-lb gauge,
billet bracket and cone, stainless steel hose assembly and
necessary mounting hardware.
270089
Chrome Oil Pressure Gauge Cups
Dress up that oil pressure gauge. An oil pressure gauge installed into your
engine case is a great accessory, but often looks like an afterthought with
its bare housing sticking up for all to see. These chrome gauge cups from
Novello Innovations will transform that bare gauge from zero to hero.
Machined from billet aluminum and show-chrome plated. They fit most
1.5"-diameter gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.24
270067 Ball milled
270069 Ribbed
270089 Stepped
05889 Fits Twin Cam 88® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$174.60
05897 Fits Evolution® Big Twin models . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95
Note: Gauge must have square mounting lug on back side to fit gauge cup.
Sheetmetal
Oil Pressure Gauge Kits
for Evolution® Big Twins
These kits permit you
to check your oil
pressure at a glance
while riding. They
include chromeplated adapters and
an oil line that
connect the engine
block and the rocker box.
Install in minutes and fit all
Evolution® Big Twins from
1984 thru 1999. Available with
100 lb. or 60 lb. liquid-filled
oil pressure gauges. . . . .$43.99
18215 Kit with 100 lb. gauge
18216 Kit with 60 lb. gauge
270071 Replacement
chrome fitting kit
(gauge not included) . . . . .$14.39
16
Rocker Box
Oil Pressure Gauges
D&S/VDO Oil Pressure Gauge
with White Face
Clear and easy-to-read, this 100-lb mechanical
gauge features a stable “air-movement”, rather
than a murky glycerin-filled face. Add a chrome
housing and bezel, glass lens and 270° sweep,
and you’ve got a gauge that’s easy on the eyes.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.84
23136 100-lb gauge
A selection of liquid-filled oil pressure gauges
with unique chrome-plated adapters which permit them to be mounted to the rear rockershaft.
Now you can install your oil pressure gauge in a
place where you can easily read it while you’re
riding your bike. Installation takes only a few
minutes because the adapter replaces the stock
rockershaft end plug. Fit all 1957 thru 1985
Sportster® models and Shovelhead Big Twins
from 1966 thru 1984 with your choice of 60 lb.
or 100 lb. gauges. . . . . . . . . . . . . . . . . . . . . . . . .$51.49
60 Pound 100 Pound
Gauge
Gauge
18211
n/a
18212 18214
16.100
1957 thru 1970
1971 thru 1985
Oil Pressure Gauges & Accessories
Apparel
Bike Kits
& Trailers
270099
Seats
& Bags
Foot
Controls
270096
270074
Hand
Controls
60lb. Billet Oil Gauge Kits by Outlaw Cycle
These custom oil gauge kits are made with precision craftsmanship and quality materials. Each kit is designed to work with both stock and most stretched
gas tanks. Kits include: billet aluminum gauge housing, durable oil-filled gauge, and braided oil line. Made in USA.
Lighting
Chrome
270072 Fits Sportster® models from 1986 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . .$225.89
270074 Fits Evolution® Big Twin models from 1984 thru 1999 . . . . . . . . . . . . . .$225.89
270079 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . . . . . . . . .$246.29
270072
Black
Components finished in high-tech black.
270096 Fits all Twin Cam 88® models from 1999 to present . . . . . . . . . . . . . . . .$225.89
270099 Fits all Evolution® Big Twin models from 1984 thru 1999 . . . . . . . . . . .$204.34
Electrical
Exhaust
Intake
18199
Engine
18196
Oil Pressure Gauge Adapters
for Late-Model Big Twins
VDO® Oil Pressure Gauge
Liquid Filled Oil Pressure Gauges
Monitor the engines critical oil pressure with these
eye-catching, custom faced gauges. Glass lens, polished stainless steel bezel. Chrome case filled with
vibration damping fluid. . . . . . . . . . . . . . . . . .$26.99
60 Pound Gauges
18264 Carbon fiber
18266 Sunset
18268 Engine-turned
100 Pound Gauges
18265 Carbon fiber
18267 Sunset
18269 Engine-turned
Black on black face and body looks great when
chrome won't do. Mechanical gauge features
a 100-lb display. . . . . . . . . . . . . . . . . . . . . . . . . . .$34.19
27828 Sold each
Made from ‘6061-T6’ aluminum and available in
two different styles with two different finishes.
The dual adapters permit the use of an oil pressure Tranny
gauge without giving up your dash or instrument- & Clutch
mounted oil pressure light. The single adapters are
for use with an oil pressure gauge only. Both styles
fit all Big Twins (except Twin Cam 88® models from
1970 thru 1999 (stock exhaust with crossover tube Driveline
may interfere). Sold each. . . . . . . . . . . . . . . . .$28.49
Natural
270062
Gaskets
Black
18196 18197
18198 18199
Dual adapter
Single adapter
Wheels,
Tires
& Brakes
270060
270063
270064
Frames
270065
Chrome Oil Gauge Fittings
Replacement chrome fittings for CC and most
aftermarket oil gauge kits. Sold each.
270060 90° 1/8" NPT female elbow.
Used on XL . . . . . . . . . . . . . . . . . . . . . . .$3.34
270062 Adapter 1/2"-20 male to 1/8" NPT
female. Used on 1970-1999
Big Twins . . . . . . . . . . . . . . . . . . . . .$6.99
270063 Adapter 1/8"-20 NPT male/female.
Used on 1938-1969 Big Twins . . . . . .$2.84
270064 11/2"-long 1/8" NPT pipe extension.
Used on XL . . . . . . . . . . . . . . . . . . . . . .$2.34
270065 3"-long 1/8" NPT pipe extension.
Used on XL . . . . . . . . . . . . . . . . . . . . . . .$3.59
Forks
& Shocks
Oil Pressure Gauge Adapter
Sheetmetal
Allows installation of analog oil pressure gauges
without sacrificing the stock warning light. Fits
Evolution® Big Twins 1984 to present.
Silver anodized finish. . . . . . . . . . . . . . . . . . . .$30.99 General
020529 Sold each
16.101
Cross
Reference
Oil Pressure Switches & Covers
28908
Chrome Oil Pressure Sender
Cover Kit by KüryAkyn®
This rubber-lined, easily-installed, die-cast cover
kit fits all Evolution® Big Twins from 1984 thru
1999 (except models equipped with large twoterminal sending units). . . . . . . . . . . . . . . . . . .$29.99
48265 Sender cover kit
Doss Oil Pressure Switch Cover
Cover the plain-looking stock switch with our
distinctive ribbed Rick Doss design. . . . . . . .$28.29
46328 Fits Evolution® Big Twin models 1984 to
present with indicator lights
28858
‘Bad Ass’ Oil Pressure
Sender Covers
Oil Pressure Switches
Clean up your unsightly oil pressure
sending unit with one of these chrome
steel covers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
28908 Fits Evolution® Big Twin engines
(except models with side-mount senders)
28858 Fits Twin Cam 88® engines
(except models with oil pressure gauges)
Replacement switches have heavy-duty contacts
and thermoplastic insulator. Made in the USA.
Fits Evolution® Big Twin models from 1984 to
present (except models with electric oil pressure
gauges). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.19
Fits Sportster® models from 1977
thru 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39
Fits Big Twins from 1941 thru 1984 (except
Evolution® models), and Sportster® and K models
from 1954 thru 1976. . . . . . . . . . . . . . . . . . . . . .$8.09
Neutral Switch Cover
by KüryAkyn™
Hide the neutral switch and connector with this
chrome-plated custom cover. Fits the switch in
the transmission top cover. . . . . . . . . . . . . . . .$16.95
48228 Fits all 5-speed Big Twins from
1980 to present
Sheetmetal
25773
Accel® Oil Pressure Switches
American-made units with heavy-duty contacts, brass ferrule, thermoplastic insulator
and a bright finish.
25460
25731
Fits Sportster® and K models from 1954
thru 1976 and Big Twins from 1941 thru
1984 (except Evolution® models).
25460 Replaces OEM 26552-72 . . . . . .$9.11
Fits Sportster® models from 1977 thru 2003.
25463 Replaces OEM 26554-77 . . . . .$12.27
16
25463
25464
16.102
Fits Evolution® Big Twin models from 1984
to present (except models with electric oil
pressure gauge).
25464 Replaces OEM 26561-84 . . . . . .$8.73
Leather Oil Cooler Covers
Custom Chrome® has three variations of our
popular oil cooler cover. All of these styles fit
the 500 series Lockhart oil cooler, or any of the
horizontal mount Harley-Davidson® coolers
without a built-in thermostat.
25761 Plain (not shown) . . . . . . . . . . . . . . . .$16.99
25773 Embossed . . . . . . . . . . . . . . . . . . . . . . .$16.99
25731 With winged concho . . . . . . . . . . . . .$39.99
Oil Coolers & Conversion Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Billet Oil Cooler Adapters for Twin Cam 88® Models
Clean billet aluminum part mounts between the oil filter housing and the
engine case on Twin Cam 88® engines (except Softail® models) to permit
routing of oil cooler lines. Uses standard 3/8" hose connectors. Includes
mounting brackets, hardware and hose fittings. Available with chromeplated or highly-polished finishes.
Fits Twin Cam 88® Dyna Glide Models from 1999 to Present
17995 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.49
17996 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.44
Fits Twin Cam 88 FLT, FLHT and Road King Models
from 1999 to Present
18057 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.49
18058 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.44
®
®
Lighting
‘Billet-Cool’ Oil Coolers by ACP
Lower engine temperature with the one-piece American Custom Products
design. Installs in minutes between the engine oil filter boss and spin-on
filter. Highly efficient heat sink design pulls heat out of oil as it passes to
Electrical
and from the filter. Machined from 6061-T6 aluminum, eliminating external
oil lines, fittings, brackets, thermostats and valves. A vinyl wrap is included
for cold-weather riding.
For Carbureted Models
Fit Softail® models 1992 thru 1999; FXR 1992 thru 1994; Dyna Glide models Exhaust
(except FXDWG and Twin Cam 88® models); all Sportster® and Buell® models
from late 1984 thru 2003 (except with fuel injection).
32015 Black powder coated with polished fins . . . . . . . . . . . . . . . . . . .$208.64
32016 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$195.84
Intake
For Fuel-Injected Models
Fit all fuel-injected models from 1995 thru 1998.
32017 Black powder coated with polished fins . . . . . . . . . . . . . . . . . . .$224.84
32018 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$215.44
Engine
Optional Accessories
Adapter nipple: reduces oil filter thread from 3/4" to 5/8"-diameter. Permits
use of ‘short’ oil filters (CC #26109) when additional clearance is required.
32023 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
Gaskets
Duo-Nipple: converts a 5/8"-diameter oil filter thread to 3/4". Permits
installation of a ‘long’ oil filter (CC #25250) or Billet-Cool Oil Cooler when
clearance permits.
32024 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
U.S. Patent #5,548,893
Perf-form® Spin-On Oil Filter/Cooler Kit
Combination oil filter housing/oil cooler mounts directly to most 3/4"-16
thread spin-on filter mounts. Provides efficient oil cooling and fast economical filter changes. Features high efficiency Perf-form ’HD-X’ disposable
filter cartridges that filter out particulates that are as small as 4 microns,
finned aluminum canister housing, stainless steel nut plate and port nut,
all necessary seals, a socket filter wrench and three replacement cartridges.
Fit all Twin Cam 88® models with carburetors from 1999 to present,
Evolution® Big Twins from 1984 thru 1999, and Sportster® models from late
1984 thru 2003 with front-mounted 3/4"-16 thread spin-on oil filters.
25018 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$166.99
25019 Replacement HD-X filter cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.79
Frames
'Billet-Cool' Oil Cooler Conversion Kits by ACP
Designed by American Custom Products, all pieces are precision-machined
from aluminum and stainless steel with satin finish. The fully-adjustable
design permits installation of a spin-on filter in front of the engine on most Forks
Big Twins. Ideal for custom motorcycle projects. Fits Softail® models from
& Shocks
1984 thru 1999, FXR models from 1982 thru 1991, FLT/FLHT models from
1980 thru 1991 and all Shovelhead models from 1970 thru 1984.
Note: 1991 thru 1999 Softail® models require removal of the OEM oil filter mount.
32022 Natural aluminum finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$276.19
32021 Natural aluminum with black accents . . . . . . . . . . . . . . . . . . . . .$296.64
Sheetmetal
General
16.103
Cross
Reference
Oil Cooler Kits
86049
RBS High-Performance Billet Aluminum
Oil Cooler Kits for Buell® Models
86041
CNC-machined kits for installation on the frame side tubes. They will lower
the temperature up to 30%, and due to the special tapered shape, they
will give your bike a very clean look. Each kit includes frame clamps and
3/8" spigot oil line fittings. To connect the oil coolers into the oil circuit,
we offer a special oil filter mount adapter with integrated bypass valve
(CC #86056 – see page 16.118). With this unique part you will not have to
route meters of oil line to the oil tank. They’re available with polished or
black-anodized finishes and will fit all Buell models. Sold in pairs.
86617 Polished oil cooler kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$669.09
86618 Black anodized oil cooler kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$764.79
86054
Pro-One™ Billet Oil Cooler
Sheetmetal
RBS High-Performance Aluminum Oil Cooler Kits
CNC-machined kits for installation on the frame down tubes. They will
lower the oil temperature up to 30%, and due to the special shape, they
will give your bike a very clean look. Each kit includes frame clamps and
3/8" spigot oil line fittings. To connect the oil coolers into the oil circuit,
we offer a special oil filter mount adapter with integrated bypass valve
(CC #86056 – see see page 16.118). With these unique parts you will not
have to route meters of oil line to the oil tank. Available with polished or
black-anodized finishes. Sold in pairs.
Chrome billet aluminum enhances the look of your bike and aids oil
cooling to increase reliability. Clamps to frame downtube, complete
with A/N type fittings.Bracket fits 1", 11/8", 11/4" frame tubes.
65291 Cooler kit without gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$283.95
65292 Cooler kit with VDO oil pressure gauge . . . . . . . . . . . . . . . . . . .$314.95
Straight Oil Cooler Kits 7.5"-long (190mm)
For FXR/Pro-Street Models
86049 Polished . . . . . . . . . .$666.89
86041 Black . . . . . . . . . . . . .$769.19
86050 Polished . . . . . . . . . . . .$612.99
86044 Black . . . . . . . . . . . . . . .$664.69
Straight Oil Cooler Kits 6"-long (150mm)
For Dyna Glide Models
For Sportster® Models
86052 Polished . . . . . . . . . .$634.99
86043 Black . . . . . . . . . . . . .$629.59
86051 Polished . . . . . . . . . . . .$633.89
86042 Black . . . . . . . . . . . . . . .$605.29
For Buell® models
16
86040 Black . . . . . . . . . . . . .$528.39
Tapered Oil Cooler Kits 11"-long (280mm)
For FXR/Pro-Street Models
86054 Polished . . . . . . . . . .$666.89
86114 Black . . . . . . . . . . . . .$769.19
86055 Polished . . . . . . . . . . . .$671.29
86115 Black . . . . . . . . . . . . . . .$772.49
For FLT/FLHT/FLHS Models
Super Mini Oil Cooler Kit
Kit includes clamps, hose ties, and oil line. Black only.
Measures 5"-high x 2"-wide x 1"-thick.
26412 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
26398 Cooler only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.39
86053 Polished . . . . . . . . . .$669.09
16.104
Oil Cooler Kits & Oil Lines
25289
Apparel
Bike Kits
& Trailers
Frame Downtube Mount Oil Cooler Kits
Oil coolers by NYC have both performance and good looks. These
finned oil coolers are functional art! Now you can have a very efficient oil cooler that adds to the appearance of your bike while
reducing oil operating temperatures 20-30%. All NYC cooler cores
are machined from billet aluminum. Available polished or chromeplated. Frame clamps are machined from billet aluminum, and
available either chrome plated or black powder coated.
Chrome with Chrome Clamps
270462 Fits models with 11/8" down tubes: FLST, FXST thru 1999,
FLHR-FLHT thru 2000, FL and FLH 1965-1984, FX 1971-1980,
and FXWG 1985-1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.99
270463 Fits models with 11/4" down tubes: FLST 2000 and FXR
all years . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.99
Seats
& Bags
25276
25292
Foot
Controls
Perf-form Oil Coolers/Filters
270462
Polished with Black Powdered Coated Clamps
270467 Fits models with 11/8" down tubes: FLST, FXST thru 1999,
FLHR-FLHT thru 2000, FL-FLH 1965-1984, FX 1971-1980
and FXWG 1985-1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$352.99
Made of polished and lacquered cast aluminum,
these combination oil filters and coolers mount
externally in front of the engine. They fit all
4-speed Big Twins from 1970 thru 1984 when
installed in conjunction with a CC #25289 bracket. Kits includes an oil filter, the canister with
chrome-plated hose fittings, 7 feet of 3/8" oil
line, 4 hose clamps and 4 tie-wraps.
25276 Recessed fins . . . . . . . . . . . . . . . . . .$130.69
25292 External fins . . . . . . . . . . . . . . . . . .$130.69
Hand
Controls
Lighting
Accessories and Parts
Electrical
Optional chrome mounting bracket. Bolts to the
left front footpeg and kickstand frame lug to
mount the oil filter/cooler horizontally over the
voltage regulator in front of the engine.
Exhaust
25289 Chrome mounting bracket . . . . .$30.54
25545 Replacement oil filter element (must
be used with above kits, other
elements will cause restriction) . .$7.19
Intake
Engine
Russell Stainless Steel Hose
™
3/8" Custom Oil Line Kit
Includes 8-feet of stainless steel hose and eight
tumbled aluminum Tube-Seal™ hose ends, more
than enough for most standard applications.
However, for bikes with oil coolers or outsidethe-tank oil filters, additional hose may be
required, and is available in bulk lengths.
13295 Stainless . . . . . . . . . . . . . . . . . . . . . . .$65.99
Russell™ ‘Street-Flex’ Pre-Cut
Oil Line Kits
For oil lines, oil coolers and remote oil filters, these
stainless steel wire braided kits are pre-cut to OEM
lengths for easy installation. Each kit includes
enough Tube Seal™ hose ends to complete the
installation. Fit most models from 1968 thru 1991.
For 4-Speed FL and FX models 1968 thru
1986 (including models with primary belt
drive) and Softail® models 1984 thru 1986
13300 Engine kit without oil cooler
or outside-the-tank filter . . . . . . . . .$90.99
13320 Engine kit with oil cooler
and in-tank filter . . . . . . . . . . . . . . .$137.99
13330 Oil cooler lines ONLY . . . . . . . . . . .$103.99
13370 Oil filter kit for models
with spin-on filters . . . . . . . . . . . . . . .$90.99
For Softail Models from 1987 thru 1991
13345 Engine kit without oil cooler . . . .$129.99
13330 Oil cooler lines ONLY . . . . . . . . . . .$103.99
®
For FXR Models from 1982 thru 1986
13310 Engine kit without oil cooler . . . . .$66.99
13340 Oil cooler lines ONLY . . . . . . . . . . . .$79.99
Gaskets
Tranny
& Clutch
Stainless Steel Bulk Hose
3 Foot Roll
13405 Stainless 5/16"-diameter . .$27.99 per roll
13410 Stainless 3/8"-diameter . . .$20.99 per roll
6 Foot
13415
13420
13425
Roll
Stainless 1/4"-diameter . . .$29.95 per roll
Stainless 5/16"-diameter . .$35.99 per roll
Stainless 3/8"-diameter . . .$35.99 per roll
Stainless Steel
Oil Cooler Hose Kits
Driveline
Includes pre-cut braided oil cooler lines (52” and
44” length), chrome hose ends and tie straps.
Wheels,
270570 Stainless braided . . . . . . . . . . . . . . . .$71.69
Tires
& Brakes
10 Foot Roll
Frames
25 Foot Roll
13450 Stainless 5/16"-diameter .$126.95 per roll
Forks
& Shocks
Replacement Hose Ends (Pack of 6)
13350 For 1/4" hose . . . . . . . . . . . . . . . . . . . .$19.95
13351 For 5/16" hose . . . . . . . . . . . . . . . . . . .$19.95
13352 For 3/8" hose . . . . . . . . . . . . . . . . . . . .$19.95
Sheetmetal
For FXR Models from 1987 thru 1991
13291 Engine kit without oil cooler . . . .$109.95
13340 Oil cooler lines ONLY . . . . . . . . . . . .$79.99
General
16.105
Cross
Reference
Braided Oil Lines
12852
12863
12861
12864
12853
12860
12862
12865
12854
12851
12850
Steel Braided Oil Line Sets
Sheetmetal
Steel Braided Oil Line Sets
These kits are the ultimate upgrade for the
oiling system on Softail® models. Each of
these bolt-on kits is made with high-quality
pre-formed and braided oil line terminated
with bright zinc chromate fittings.
12850 Fits Softail® models from 1993 thru
1999 with new style oil pump and
new style oil filter mount (4-piece kit
in which the extra line replaces the
Original Equipment steel oil filter
pipe) . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99
1999 with new style oil pump
(3-piece kit) . . . . . . . . . . . . . . . . . . . . .$122.99
1991 with stock oil tanks, oil filter
mounted to the right-side frame
loop and the ignition module
mounted under the seat . . . . . . . .$159.99
12854 Fits 1989 Softail® models ONLY with
stock oil tanks, oil filter mounted
to the right-side frame loop and
the ignition module mounted
under the seat . . . . . . . . . . . . . . . . . .$159.99
12852 Fits 1986 5-speed Softail®
models ONLY . . . . . . . . . . . . . . . . . . .$159.99
12843 Fits Twin Cam 88® Softail® models
from 2000 to present . . . . . . . . . . .$159.99
Complete stainless steel oil line sets with top-quality fittings.
12860 Fits 4-speed Shovelhead models from 1968-early 1982 with stock oil tank
containing an internal oil filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.99
12861 Fits 1966 thru 1967 Shovelhead models with a wraparound oil tank . . . . . . . . . . . . . . . . . . . . . .$82.99
12862 Fits 1968 thru 1980 Shovelhead models with a wraparound oil tank . . . . . . . . . . . . . . . . . . . . . .$92.99
12863 Fits 1936 thru 1964 Knuckleheads and Panheads with wraparound oil tanks
in rigid frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99
in swingarm frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99
in rigid frames using stock oil filters mounted in front of the rear exhaust pipe
(will not work with the voltage regulator mounted on back of engine) . . . . . . . . . . . . . . . . . . .$98.99
12841 Fits FXR models from 1992 thru 1999 with stock oil tank and late-style oil filter
with oil filter bracket mounted to the right side of the engine . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99
12842 Fits custom frames. 4 line kit for bikes with wraparound oil tanks with 1/8" NPT
bottom female vent and return lines, 1992 thru 1999 style oil pump, and 1/4" NPT
threads on the oil filter housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99
Goodridge Stainless Steel Oil Line Kits
®
Complete braided oil line kits made with chrome fittings,
crimped onto stainless braided, smooth-bore teflon hose.
Available for most Evolution®, Shovelhead and Sportster®
models from 1968 thru 2003.
Part #
84756
84755
84754
84758
84759
28187
16
84762
84764
84761
Applications
Year
Fits Softail® models
1992 thru 1999 . . . .$193.79
1986 thru 1991 . . . .$258.39
all years . . . . . . . . . . .$258.39
with RevTech® engines
Fits FLT/FLHT models
1994 thru 1998 . . . .$209.89
Fits Dyna Glide models
1991 thru 1998 . . . .$209.99
Fits Dyna Glide models
1991 thru 1998
with oil cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.79
Fits FXR models
1992 thru 1994 . . . .$161.49
Fits FXR models
1986 thru 1991 . . . .$234.19
Fits Sportster® models
1991 thru 2003 . . . .$209.99
Note: CC #84754 will also fit Original Equipment engines if the hard oil lines
are removed from the oil filter.
16.106
Steel Braided
Oil Line Set
Complete stainless steel sets for
4-speed models (except Softail®
models) with stock or wraparound
oil tanks in swingarm frames and
our oil filter kits (CC #’s 26650 or
26652) mounted behind the rear
exhaust. All lines feature top-quality fittings. . . . . . . . . . . . . . . . . . .$97.99
12855 For Knuckleheads
and Panheads
12856 For Shovelheads
Braided Oil Lines
Apparel
Bike Kits
& Trailers
Seats
& Bags
270581
Foot
Controls
270579
Braided Oil Line Kits for Softail® Models
These American made oil line kits feature super high quality stainless
steel hose with a Teflon™ inner liner that is pressure rated to 3,000 psi and
temperatures to 450° F. Designed for late model Softail® with stock wraparound oil tank. Kits includes braided lines with cad-plated fittings and
instructions.
270581 Fits Softail® models from 1987 thru 1989 . . . . . . . . . . . . . . . . . . . .$159.99
270579 Fits Softail® models from 1990 thru 1991 . . . . . . . . . . . . . . . . . . . .$159.99
Hand
Controls
Lighting
Big Bore ‘High Flow’ Universal Oil Line Kit
Increased diameter flows more oil for Strokers and other high-performance
motors. Features oversized 3/8" inside diameter with 1/8" female pipe
inlets and outlets. Bolt-on kit is made with high-quality pre-formed and
Electrical
braided oil lines terminated with bright zinc chromate fittings. Fits Softail®
models from 1993 thru 1999 (4-piece kit in which the extra line replaces the
Original Equipment steel oil filter pipe). Also fits after-market oil tanks and
motors and bike kits from 1993 to present (comes with adapter kit of eight
extra fittings). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$171.99
Exhaust
12844 Complete kit
Intake
Engine
28015
Gaskets
270575
270576
270578
Braided Oil Line Kits
Stainless steel oil line kits for Big Twins 1936-1982.
270575 Fits Big Twins 1936-1964 with stock and
most custom oil tanks . . . . . . . . . . . .$80.26
270576 Fits 4-speed Big Twins 1968-early 1982
with custom wrap around style oil tanks
with threaded fittings and open or belt
drive primary. Horseshoe type with fixed
side fittings . . . . . . . . . . . . . . . . . . . . . .$84.49
270578 Fits 4-speed Big Twins 1968-early 1982
with stock oil tanks and closed chain
drive primary . . . . . . . . . . . . . . . . . . . .$79.99
12428
12427
Overhead Rocker Arm Oil Lines
A custom upgrade that can be used in place of
the Original Equipment cad-plated hard lines.
Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
12427 For 1966 thru 1984 Shovelheads
12428 For 1957 thru 1985 Sportster® models
Russell™ Pro System Oil Line Kits
28016
Chrome Rocker Oil Lines
Chromed replacement rocker box oil lines for
Sportster® models and Shovelheads. Includes
complete set of fittings and seals (2 lines).
28015 Fits Shovelheads from 1966
thru 1984 (repl. OEMs 62783-66A,
62785-66A) . . . . . . . . . . . . . . . . . . . . . .$19.99
28016 Fits Sportster® models (except
magneto models) 1957 thru
1985 (repl. OEM 17324-57A) . . . . .$19.99
Rocker Box Oil Line Fittings
Includes chrome fittings and seals for the rocker
box oil lines on all Sportster® models and
Shovelheads from 1957 thru 1985.
010421 Sold in pairs (repl. OEMs 63527-57A,
63526-57) . . . . . . . . . . . . . . . . . . . . . . . .$6.19
12074 Motor Factory® oil line sleeves ONLY
(repl. OEM 63529-57) pack of 10 . .$2.09
091210 Athena oil line sleeves ONLY
(repl. OEM 63529-57) pack of 10 . .$4.04
Russell’s innovative new hose end design
eliminates ugly and troublesome clamps with
attractive and functional compression fittings.
The threaded two-piece fittings slip over the
end of the nipples and tighten for a trouble
and leak-free attachment.
13388 Fits Softail® models from late 1992
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$139.95
to early 1992 . . . . . . . . . . . . . . . . . . . .$217.99
thru 1989 . . . . . . . . . . . . . . . . . . . . . . . .$173.99
13394 Fits Dyna Glide models from 1992
thru 1998 . . . . . . . . . . . . . . . . . . . . . . . .$124.95
13389 Fits 1987 thru 1990 FXR models . . .$226.99
13390 Fits 1991 thru 1994 FXR models . . .$209.99
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$124.95
thru 1993 . . . . . . . . . . . . . . . . . . . . . . . .$178.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
16.107
Cross
Reference
Oil Lines & Fittings
Spectre®
Pre-Formed Oil
Line Kits
Add custom braided
stainless lines or replace
stock rubber with these
precision formed kits.
Made by Spectre® using
their ‘SSteelFlex’ stainless
reinforced hose in natural stainless.
Spectre® SSteelFlex Stainless Hose
Made of highest-quality 304 stainless steel braided hose in rolls for shop
use. Ideal for custom fuel and oil lines. Sold in 25 foot rolls.
11761 1/4" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.69 per foot
11762 5/16" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69 per foot
22231 3/8" SSteelFlex hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.68 per foot
Stainless Steel Pre-Formed Kits
11772 Fits 1992-1999 Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99
11773 Fits 1987-1991 Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99
11774 Fits FLT/FLHT models from 1993 thru 1998 . . . . . . . . . . . . . . . . . . .$131.99
11775 Fits Dyna Glide models from 1993 thru 1998 . . . . . . . . . . . . . . . . .$131.99
Chrome RevTech® Hose Clamps
These aircraft-style clamps give your
oil and fuel lines a professional racing
look at a fraction of the cost of A-N
fittings. Just slide them on and tighten
the gear drive clamps. Chrome-plated
finish. Sold in pairs.
11754 5/16" . . . . . . . . . . . . . . . . . .$15.49
11757 3/8" . . . . . . . . . . . . . . . . . . .$15.49
260530
Stainless Steel Braided Hose
Sold in 25 ft. rolls.
260530 1/4" ID x 25’ . . . . . . . . . . . . . . . . . . . . .$99.99
260532 5/16" ID x 25’ . . . . . . . . . . . . . . . . . . .$108.99
260534 3/8" ID x 25’ . . . . . . . . . . . . . . . . . . . .$118.49
Magnum ‘Sterling Chromite™’
Oil and Fuel Line
Reinforced Black Neoprene
Fuel and Oil Line
Fits all models. Available in 25 and 50-foot rolls,
this top-quality line is reinforced with highstrength rayon. Neoprene outer cover resists oil
and grease for years of trouble-free service.
Sheetmetal
Steel Braided Fuel Line Kit
16
This kit can be used to replace the fuel crossover
line (between tanks) or fuel feed line (between
petcock and carburetor). Fits all models with
1/4" I.D. fuel lines. Kits include 16" braided hose
and a pair of chrome end caps. . . . . . . . . . .$34.55
270565 Replaces OEM 63730-82
EARL‘S Econo-Seal Hose Ends
Perfect for gas and oil lines. Provides additional
support and helps prevent cracking. When used
with custom steel braided lines they present a
dynamite custom look. Pack of 6. . . . . . . . .$31.14
12366 1/4" chrome
12367 5/16"-3/8" chrome
16.108
25 Foot Rolls
12383 3/16" x 25 feet . . . . . . . . . .$22.75 per foot
12384 1/4" x 25 feet . . . . . . . . . . .$22.99 per foot
12385 5/16" x 25 feet . . . . . . . . . .$27.25 per foot
18235 3/8" x 25 feet . . . . . . . . . . .$29.50 per foot
50 Foot Rolls
260542 1/4" x 50 feet . . . . . . . . . . .$41.49 per foot
260547 5/16" x 50 feet . . . . . . . . . .$54.99 per foot
260541 3/8" x 50 feet . . . . . . . . . . .$54.99 per foot
Premium braided hose with patented wire braid
designed to match the brilliance of chrome. Each
strand of wire is sterling silver plated and coated
with high-temperature plastic before braiding
for easy cleaning and to prevent scratches.
Made in the USA.
15349 5/16" x 6 feet . . . . . . . . . . . . . . . . . .$48.95
Magnum Chrome Hose Connectors
Smooth updated style. Includes stainless steel
hose clamps.
45173 Fits 1/4"-5/16" line (pack of 2) . .$12.29
45175 Fits 1/4"-5/16" line (pack of 6) . .$28.49
45174 Fits 3/8" line (pack of 2) . . . . . . . .$12.29
45176 Fits 3/8" line (pack of 6) . . . . . . . .$28.49
Russell Hi-Flow Universal Crossover Fuel Line
This steel braided hose features a 5/16” I.D. for optimum flow between tank halves. Mounts with
squeeze type nut and rubber ferrule for a no leak, positive seal. Hardware is chrome plated for that
clean, custom look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99
260568 Universal fit. 111/2"-long
Oil Line Fittings
Apparel
Bike Kits
& Trailers
Seats
& Bags
Goodridge Braided Stainless Steel
Cable and Hose Covers
Are you tired of looking at your ugly vinyl
cables? Here’s the solution. Stainless steel covers
for frequently used applications. Available in
four different diameters to fit cables, oil lines,
water hoses etc. Sold in 1 meter lengths.
85122 Fits 6-16mm outer diameters
Oil Line Fittings
Ness® Chrome Spring Hose Covers
Chrome-plated spring covers protect hoses from
hot surfaces. Available for oil or fuel lines. Oil
hose cover is sold in 6-foot lengths and fuel hose
cover is sold in 3-foot lengths.
04987 Fits 3/8" oil line . . . . . . . . . . . . . . . . . .$24.99
04988 Fits 5/16" fuel line . . . . . . . . . . . . . . .$14.99
06504
Chrome fittings used for oil tank, oil pump, oil
coolers, carb fuel inlet, etc. Sold in 5 pack.
020531 Straight fitting. 3/8" hose to 1/8" NPT.
Replaces OEM 63533-41 . . . . . . . . . . .$6.99
020533 Straight fitting. 5/16" hose
to 1/8" NPT . . . . . . . . . . . . . . . . . . . . . .$12.49
020534 Straight fitting. 1/4" hose to 1/8" NPT.
Replaces OEM 63578-52 . . . . . . . . . .$12.49
020535 Straight fitting. 5/16" hose
to 1/4" NPT . . . . . . . . . . . . . . . . . . . . . .$12.49
020530 90° fitting. 3/8" hose to 1/8" NPT.
Replaces OEM 26496-75 . . . . . . . . . .$12.49
020536 90° fitting. 5/16" hose to 1/8" NPT.
Replaces OEM 62375-57 . . . . . . . . . .$12.49
020538 Pipe plug, 1/8" NPT . . . . . . . . . . . . . .$12.49
020539 Pipe plug, 1/4" NPT . . . . . . . . . . . . . .$12.49
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
06500
84753
‘E-Z Flow’ Quick-Disconnect
Fuel Crossovers
Oil Line Adapters
The only quick, clean and safe way to remove
your fuel tanks. Special hose connectors keep
fuel in the tanks when crossover is removed.
Stainless steel braided, reinforced fuel line with
chrome couplings and hose ends. Made in USA.
06500 Fits all 4-speed FL and FX models
thru 1986 and all Softail® models
from 1984 to present . . . . . . . . . . . .$88.39
06501 Fits Road King® models from 1994
to present, and all FLT and FLHT
models from 1995 to present . . . . .$99.49
06502 Fits all FLT, FLHT and FLHS models
from 1980 thru 1988 . . . . . . . . . . . . .$88.39
06503 Fits all FLT, FLHT and FLHS models
from 1989 thru 1994 and Sportster®
models with Quick Bob tanks . . . .$88.39
Have you ever wondered why there is no way
to connect rubber or braided oil lines to a “B”
engine? Well wonder no more because these
trick stainless steel oil line adapters for all
Twin Cam 88™ B motor models have been born.
They work like compression fittings and have
no ugly hose clamps. . . . . . . . . . . . . . . . . . . . .$144.99
06579 For use when installing rubber or
braided oil lines to Twin Cam 88® ‘B’
engine models
Intake
20234
20235
Oil Line T-Piece and Fittings
Brass T-piece with 3/8" spigot and chrome-plated oil line fittings with 1/8" NPT thread and 3/8" Gaskets
spigot. Sold each.
84753 Brass T-piece . . . . . . . . . . . . . . . . . . . . . .$7.99
20235 Fitting, straight
(repl. OEM 63539-41) . . . . . . . . . . . . .$2.64 Tranny
20234 Fitting, 90° (repl. OEM 26496-75) . .$2.84 & Clutch
Driveline
‘Econo-Flow’
Same great concept as the original ‘E-Z Flow’
but less flash for less cash. Made with black
plastic couplings and black rubber fuel line.
Can be used for crossover line or as fuel line
for fast tank removal. Total length of 24" that
can be cut to fit most applications. . . . . . . .$44.89
06504 For 1/4" I.D fuel lines
06505 For 5/16" I.D. fuel lines
Wheels,
Tires
& Brakes
Oil Line Fittings for Twin Cam 88®
Models by F. Kodlin
Designed by Master Customizer Fred Kodlin to
connect 3/8" steel braided oil lines to motors on
Twin Cam 88® ‘B’ models. Polished stainless steel.
Sold each (3 required). . . . . . . . . . . . . . . . . . . .$37.49
86922 Fits all Twin Cam 88® ‘B’models
Oil Line Fittings
Engine
12533
12534
Frames
Original-Style Oil Pump Fittings
Original-style fittings used with some custom
oil tanks to convert nipples so stainless-steel
braided lines may be used. Set of 3. . . . . . . .$7.99
12533 Fit nylon and braided hose
12534 Fit steel and braided fixed-end lines
Forks
& Shocks
Sheetmetal
Fits steel and braided fixed-end lines.
(1/8" NPT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.69
270598 Sold in 3 pack
General
16.109
Cross
Reference
Oil Line Separators & Clamps
380351
380300
Hose Separators
380303
Available in plain or ball milled to match
our other custom accessories, these diecast hose separators will fit 3/8" or 5/16"
I.D. rubber or stainless steel oil and fuel
lines on Big Twin and Sportster® models.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
Plain
Ball Milled
380300
380301
380302
380303
380304
78396
380351
380352
380353
n/a
Chrome
Polished
Blue
Black
Red
380302
380353
380301
380352
Ness-Tech® Radius Chrome Billet
Hose Separators
Perfect accessory to neatly route oil hoses.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95
05886 Fits 5/16" and 3/8" braided hose
270609
270608
270606
380305
Triple Hose Separator
Sheetmetal
Keep lines neatly bundled with these separators
fit 3/8" or 5/16" rubber or stainless steel hoses.
Secures with flush sockethead screws.
380305 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$12.49
380306 Polished . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
380355 Chrome ball milled . . . . . . . . . . . . . .$13.99
380356 Polished ball milled . . . . . . . . . . . . . .$12.49
Billet ‘Oil Star’ Line Holder
Keeps your oil lines clean and organized. Takes
up to 3 oil lines and fits them into 1 bundle.
Comes in polished billet aluminum and includes
chrome tie wraps. Fits 3/8" or 5/16" oil lines.
12848 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$36.99
16
Chrome Hose Ends by Goodridge
Embossed with the Goodridge name and logo
and plated in durable show quality chrome,
these hose connections feature smooth, tight
tapers for close fitment, yet retain hex wrench
adjustability. Includes stainless worm drive
clamps. Sold in packs of six. . . . . . . . . . . . . . .$27.49
14975 Fits 1/4" braided hose
14976 Fits 5/16" and 3/8" braided hose
270607
Custom Hose Clamps
These custom hose clamps feature a great look
with reliable function. Under each custom hose
cover is a weather resistant worm-drive hose
clamp. Sold in packs of 6
270606 3/8"-diameter. Slotted . . . . . . . . . . .$30.49
270607 1/4"-diameter. Slotted . . . . . . . . . . .$31.99
270608 3/8"-diameter. Grooved . . . . . . . . . .$33.49
270609 1/4"-diameter. Grooved . . . . . . . . . .$34.99
Custom Hose Clamps
Crimp Hose Clamps
Fits over oil and fuel lines. Available with
chrome or blue anodized finish. Sold in 6 packs.
270600 Chrome. Fits 3/8" and 5/16" I.D. hoses
(up to 5/8” O.D.) . . . . . . . . . . . . . . . . $28.99
270604 Blue. Fits 3/8" and 5/16" I.D. hoses
(up to 5/8" O.D.) . . . . . . . . . . . . . . . . .$22.89
270601 Chrome. Fits 1/4" I.D. hose
(up to 1/2" O.D.) . . . . . . . . . . . . . . . . .$28.99
270605 Blue. Fits 1/4" I.D. hose
(up to 1/2" O.D.) . . . . . . . . . . . . . . . . .$25.99
OEM style hose clamps. Note: Diameters listed
are before crimping. Sold in 50 pack.
260482 17/32” (.531) diameter. Fits 1/4” I.D. reinforced rubber fuel line and vent hoses.
Replaces OEM 10014 . . . . . . . . . . . . .$16.99
260483 19/32” (.594) diameter. Fits 5/16” I.D.
rubber remote brake reservoir hose.
Replaces OEM 10038 . . . . . . . . . . . . .$16.99
260484 11/16” (.687) diameter. Fits 3/8” I.D. reinforced rubber oil and vent hoses.
Replaces OEM 10020A . . . . . . . . . . .$16.99
260485 13/16” (.812) diameter.
Fits all tank drain noses.
Replaces OEM 10086 . . . . . . . . . . . . .$16.99
Mini Hose Clamps
Quality clamps for all 7/32" to 5/8" O.D. hose.
19883 Card of 24 . . . . . . . . . . . . . . . . . .$0.89 ea.
19878 Box of 10 . . . . . . . . . . . . . . . . . . .$0.89 ea.
16.110
Oil Filter Kits & Housings
Apparel
Bike Kits
& Trailers
Seats
& Bags
85847
85849
F. Kodlin Oil Filter Mounts
Chrome-plated billet aluminum oil filter mounts
to replace the factory part on all Evolution®
Big Twins from 1992 thru 1999 or for custombuilt motors. They include fittings.
85847 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . .$414.89
85848 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . .$414.89
85849 ‘Halebob’ . . . . . . . . . . . . . . . . . . . . . .$414.89
Filter Pac
Custom oil filter and regulator mount designed
to clean-up front lower mount area. Attaches to
the front of the engine. Includes a chrome billet
aluminum base plate, chrome hose fittings and
a chrome oil filter. Utilizes stock regulator. Fits
all Softail® and 4-speed Big Twin models from
1975 thru 1999.
25270 Complete kit . . . . . . . . . . . . . . . . . . .$173.29
26109 Replacement oil filter . . . . . . . . . . . . .$8.14
Foot
Controls
Hand
Controls
Lighting
85848
Electrical
25248
Exhaust
Intake
Engine
25247
270019
Oil Filter Kits
Full flow automotive style spin-on oil filter kits.
Each of these custom kits includes a chromed
heavy-gauge steel bracket, chrome disposable
oil filter, and all required hoses and clamps
for installation.
25247 Fits all 1970 thru 1978 Big Twins
without front motor mounted
rectifier/regulator (mounts on
top of front motor mount) . . . . . . .$57.99
25248 For all Sportster® models 1957
thru 1977 (mounts to left front
motor mount location) . . . . . . . . . .$57.99
270019 Fits frame tubes, excellent for
custom applications . . . . . . . . . . .$52.99
25250 Replacement oil filter . . . . . . . . . . . . .$9.89
270409 Chrome mounting bracket ONLY
for CC #25247 kit . . . . . . . . . . . . .$26.49
Chrome Oil Filter Adapter
by Pro-One™
1/2"-thick billet aluminum oil filter adapter has
external fittings. Great for slim-looking oil filter
mounting. Has standard 3/8" hose fittings for
oil lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.95
65446 Fits Evolution® Big Twins
from 1992 thru 1999
Chrome Oil Filter Housing Covers
Stamped steel cover fits over the stock oil filter
housing. Includes a cover for the frame boss
which holds the housing, and special chrome
mounting hardware. Fits all Softail® models
from 1987 thru 1991. . . . . . . . . . . . . . . . . . . . .$40.99
23168 Complete kit
Gaskets
Tranny
& Clutch
Driveline
Oil Filter Kit for Big Twins
This chrome bracket and filter kit mounts behind kickstand bracket on
4-speed Big Twins 1970-1984. Includes chrome bracket, oil filter, hose
and clamps.
Wheels,
Tires
& Brakes
Note: may interfere with some aftermarket forward shifters.
270405 Filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.49
270000 Replacement chrome filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
Frames
Forks
& Shocks
Sheetmetal
General
16.111
Cross
Reference
Oil Filter Kits & Housings
Chrome Oil Filter Housing Cover
Stamped steel cover was designed to fit like a second skin over the Original
Equipment oil filter housing on late-model Evolution® Big Twins. It provides
an economical means of chroming the right side of your bike and installs in
minutes, and is held in place with silicone (included in the kit). . . . . . .$37.99
26167 Fits all Evolution® Big Twin models from 1992 thru 1999
Chrome Oil Filter Housing Kit for Twin Cam 88® Models
Sheetmetal
This housing fits the front of all Twin Cam 88® ‘A’ engines ONLY from 1999
to present. Includes all mounting hardware. . . . . . . . . . . . . . . . . . . . .$36.49
18569 Sold each
Oil Filter Mount Adapter with Internal Thermostat
Chrome Oil Filter Housing for Evolution® Big Twins
Replace that Original Equipment black or silver painted oil filter housing.
Fits all Evolution® Big Twin models from 1992 thru 1999. . . . . . . . . . . . .$40.99
20301 For stock oil lines (repl. OEM 26381-92A)
20302 For custom slip-over steel braided or rubber oil lines
270443 Replacement nut and seal kit (repl. OEMs 63530-92 and 63528-92)
4 pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
This unique part eliminates the need to route oil line from the oil cooler to
the oil tank. Just mount it between the oil filter mount and the oil filter
and connect the oil lines. Another feature is the internal thermostat for use
with oil coolers. No need to install an extra in-line thermostat to the frame.
Does not include oil filter mount or filter.
86056 Fits most Evolution® Big Twins from 1992 thru 1999 . . . . . . . . .$318.09
87004 Fits most Twin Cam 88® Big Twins from 1999 to present . . . .$286.69
86067 Replacement gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
16
16.112
Oil Filter Kits & Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Spin-On Oil Filter Kit
Early-Style Accessory
Oil Filter System
Accurate reproduction of the early accessory oil filter kit used on 1940 thru 1964 Big
Twins. Can be easily fitted to 4-speed and
Softail® models.
26652 Chrome oil filter assembly with gasket kit and filter (replaces OEMs
63800-48 and 63800-58) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.49
26656 Gasket kit for oil filter assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.29
26657 Filter element (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
A high-tech replacement for your
canister-type oil filters. It’s approximately
the same size as the stock unit and accepts CC #25250
chrome spin-on filter to eliminate leaks. Makes filter
changes clean and easy. Comes with both threaded and slip-on fittings.
Uses our mounting brackets.
26650 Spin-on filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.49
25250 Replacement filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89
Hand
Controls
Lighting
Electrical
Note: Does not include oil hose.
Exhaust
Intake
Engine
Oil Filter Mounting Bracket
270408
Vintage Oil Filter Kit for Big Twins
We’ve combined our popular chrome vintage filter assembly with the proper hardware to fit 4-speed Big Twins 1965-1984. Kit includes filter assembly,
bracket, fittings, and stainless steel braided hose with chrome ends.
270408 Filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
Chrome-plated steel mounting bracket is for the Softail® owner who is trying to make his bike look like a 1950s Panhead. It permits the installation
of an early-style external oil filter in close proximity to the oil tank to
replace the stock spin-on filter. May be used in conjunction with Part
#26652 early-style oil filter, or Part #26650 early-style oil filter with spin-on
filter. Kit comes complete with bracket, custom nut and drilling template
for the frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
26654
26653
26655
Frames
Forks
& Shocks
Oil Filter Mounting Brackets
Oil Filter Wrench
Fits all Harley-Davidson® spin-on filters. 3/8" socket drive. . . . . . . . . . . .$12.34
400503 Sold each
Chrome steel brackets to mount accessory oil filters. Designed for use in
conjunction with CC #’s 26650 or 26652 oil filter kits. Available for rigid and
Sheetswingarm 4-speed Big Twin frames from 1940 thru 1986.
metal
26653 Fits 1940 thru 1957 rigid frames
(repl. OEM 63860-50) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
26654 Fits 1958 thru 1964 swingarm frames
(repl. OEM 63860-58A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
General
26655 Fits 1965 thru 1986 4-speed frames
®
(except Softail models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
16.113
Cross
Reference
Oil Filters
Nowle for
ilab D
a
Av
Ols
-R
VM
ode
Nowle for
ilab
Ava ROD
- odels
VM
25543
Mag
n
Oil F etic
ilter
Chrome RevTech® High-Performance
Magnetic Oil Filters
25221
25250
Premium® Oil Filters for Twin Cam 88® Models
These oil filters were developed for the Twin Cam 88® engine but are also a great
upgrade for replacing the ‘long’ filters on other models for increased protection from
contamination. They’re capable of trapping particulates down to 10 microns in size and
fit all Twin Cam 88® models from 1998 to present, as well as all 5-speed models (except
Dyna Glide models) from 1980 to present, late 1984 thru 2003 Sportster® models, and all
Softail® models from 1984 to present.
22250 Chrome (replaces OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.09
22251 Black (replaces OEM 63731-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.14
Premium® Oil Filters for V-Rod® Models
Developed specifically for the unique demands of the Revolution® engine. They’re
capable of trapping particulates down to 10 microns in size and fit all VRSC models
from 2002 to present.
625222 Chrome (replaces OEM 63793-01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
Premium® Oil Filters for Sportster® and Big Twin Models
Short Filters
Fit all Sportster® models from 1980-early 1984, and 4-speed Big Twin models (except
Softail® models) with factory-installed spin-on oil filters from late 1982 thru 1986.
Sheetmetal
Long Filters
Fit 5-speed Shovelhead and Evolution® Big Twin models (except Dyna Glide models)
from 1980 thru 1998, Sportster® models from late 1984 thru 2003, and all Softail®
models from 1984 thru 1999, as well as most Harley-Davidson® accessory oil filter kits.
25250 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89
Each filter has a magnetic ring tower in the center of the
filter to remove metal particles under 10 microns which
might have travelled through the filter wall. They also
have built-in, correctly-calibrated pressure relief valves and
one-piece cans with fully-rolled and safety-crimped edges to
protect against leakage. These high-performance RevTech® oil
filters have more paper folds than our Premium® spin-on
oil filters resulting in 30% more filtering surface and
the filter paper lasts 30% longer. Great for those highperformance and stock motors.
Short Filter
Fits all Sportster® models from 1980-early 1984, and 4-speed
Big Twin models (except Softail® models) with factory installed
spin-on oil filters from late 1982 thru 1986.
35077 Replaces OEM 63782-80 . . . . . . . . . . . . . . . . . . . . . . .$10.84
Long Filters
Fit all 5-speed models (except Evolution® Dyna Glide models)
from 1980 to present, V-Rod® models from 2002 to present,
Sportster® models from late 1984 thru 2003, and all Softail®
models from 1984 to present, as well as most Harley-Davidson®
accessory oil filter kits.
35074 Fits Twin Cam 88® models
(replaces OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . .$16.09
35078 Fits Sportster® and Big Twin models
(replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . .$13.64
625224 Fits V-Rod® models (replaces OEM 63793-01) . . .$12.99
Extra-Long Filter
Fits all Dyna Glide models from 1991 thru 1998, Sportster®
models from late 1984 thru 2003, and all Big Twin models
from 1992 thru 1999 (except Twin Cam 88® models).
35079 Replaces OEM 63813-90 . . . . . . . . . . . . . . . . . . . . . . .$14.49
Extra-Long Filters
Fit all Dyna Glide models from 1991 thru 1998, Sportster® models from late 1984 thru
2003, and all Big Twin models from 1992 thru 1999 (except Twin Cam 88® models).
Chrome Magnetic Oil Filters
•
•
•
•
270449
270448
Internal magnet removes tiny ferrous particles under 10 microns
Low restriction high density filter material for dependability
Built-in internal pressure release valve
Increased filter element area for maximum flow
Short filter for all Sportster® models from 1980-early 1984, and 4-speed Big Twin models
(except Softail® models) with factory installed spin-on oil filters from late 1982 thru 1986.
270447 Replaces OEM 63782-80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
Long filter for 5-speed Shovelhead and Evolution® Big Twin models (except Dyna Glide
models) from 1980 thru 1998, Sportster® models from late 1984 thru 2003, and all Softail®
models from 1984 thru 1999, as well as most Harley-Davidson® accessory oil filter kits.
270448 Replaces OEM 63796-77A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.66
16
270447
16.114
Extra-long filter for all Dyna Glide models from 1991 thru 1998, Sportster® models
from late 1984 thru 2003, and all Big Twin models from 1992 thru 1999 (except
Twin Cam 88® models).
270449 Replaces OEM 63813-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.91
Oil Filters
Apparel
Bike Kits
& Trailers
Seats
& Bags
29264
Foot
Controls
Hand
Controls
270126
Motor Factory® American Made Chrome Oil Filters
29262
629265
29261
‘Performance Gold’ Oil Filters with TÜV by K&N
These oil filters were designed for high-performance engines and synthetic
oils. They feature a 17mm wrench nut for easy service in which the nut is
drilled for safety wire security. Other features include thick-wall construction, strong inner cores, heavy base plates with double rolled seals and
improved pressure relief valves. The check valve prevents oil drainback
and dry starts. The modern synthetic-blend filter media catches more dirt,
while still permitting more flow with less pressure drop, and is unaffected
by racing fuels. Sold each.
Short Filter
Fits all Sportster® models from 1980-early 1984, and 4-speed Big Twin
models (except Softail® models) with factory installed spin-on oil filters
from late 1982 thru 1986.
29261 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.74
Long Filter
Fit all Twin Cam 88® models from 1998 to present, as well as all 5-speed
models (except Dyna Glide models) from 1980 to present, late 1984 thru
2003 Sportster® and Buell® models, and all Softail® models from 1984 to
present, as well as most Harley-Davidson® accessory oil filter kits.
29262 Chrome with Anti Drain Back Valve (repl. OEM 63796-77A) . . .$12.74
629265 Chrome without Anti Drain Back Valve . . . . . . . . . . . . . . . . . . . . . .$13.95
270126 Black with Anti Drain Back Valve (replaces OEM 63805-80) . . .$13.49
Exclusively from Custom Chrome®, these Motor Factory® oil filters incorLighting
porate state-of-the-art filtration technology and production techniques.
A special synthetic microglass enhanced material holds more dirt without
increasing flow restriction and greatly increases the filters efficiency in
the 4 to 22 micron range, the size most effective in reducing engine wear.
Motor Factory® filters are display packaged for maximum visibility and inElectrical
clude pressure relief valves and flow rates correctly calibrated to the correct
specifications. Available for most models from 1953 thru 1999.
Short Filter
270431 Chrome (replaces OEM 63782-80) . . . . . . . . . . . . . . . . . . . . . . . . . .$12.79
Exhaust
Long Filter
Fits 5-speed Shovelhead and Evolution® Big Twin models (except Dyna Glide Intake
models) from 1980 thru 1998, Sportster® models from late 1984 thru 2003,
and all Softail® models from 1984 thru 1999, as well as most Harley-Davidson®
270433 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . .$13.19
Engine
Drop-In Filter
Fits most models with in-tank filters from 1953 thru 1983. Replaces the
messy Original Equipment cup and retainer systems with a simple one-piece
drop-in unit.
270438 Sold each (replaces OEM 63840-53) . . . . . . . . . . . . . . . . . . . . . . . . .$7.59 Gaskets
Extra-Long Filter
Fits all Dyna Glide models from 1991 thru 1998, Sportster® models
from late 1984 thru 2003, and all Big Twin models from 1992 thru
1999 (except Twin Cam 88® models).
Tranny
& Clutch
Driveline
Perf-form Oil Filters
Top quality, made in U.S.A. black or chrome spin-on filters for models from
1980 thru 2003. The large filter is one inch longer-than-stock to increase the
oil capacity of the system and permit the oil filter to help cool the oil. The
short filter features 24 square inches more pleated filter paper than comparable filters, and an anti-drain back valve not found on most other filters.
Short Filters
25541 Black (replaces OEM 63810-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.69
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Long Filters
Fits 5-speed Shovelhead and Evolution® Big Twin models (except Dyna Glide
Sheetmodels and 1987-up Softail® models) from 1980 thru 1998, Sportster® models from late 1984 thru 2003, all Softail® models from 1984 thru 1986, as well metal
as most Harley-Davidson® accessory oil filter kits.
25546 Black (replaces OEM 63805-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79
25528 Chrome (replaces OEM 63796-77A) . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.89
General
16.115
Cross
Reference
Oil Filters
U.S. Patent #4,935,128
Replaces All This
Perf-form™ Oil Filter
Quick change, easy-to-install one-piece oil filter
for most models from 1953 thru 1983 with
in-tank filters. Replaces the stock fiber element
with a pleated paper element. . . . . . . . . . . . .$7.19
C.C. Rider® Drop-In Oil Filter
Features a permanently lubricated relief valve
with all-steel construction and 12% more filter
media than other similar filters. The automotive-quality impregnated paper element is
much more effective in particulate filtration
than the stock fiber element, and superior in its
resistance to acid build-up. Pleated paper element within a plated screen allows the entire
oil flow to be forced thru instead of just over its
surface during high oil pressure situations like
start-up and acceleration. This filter eliminates
the mess associated with the OEM filter, and
takes only seconds to change. Fits most models
with in-tank filters from 1953 thru 1983. . .$7.69
Dual Stage Super Filter™
Engineered like no other, the SUPER FILTER
from Custom Chrome® incorporates an exclusive
DUAL STAGE filtration system that’s actually
two filters in one. Under normal conditions,
STAGE ONE is at work. Its low restriction paper
element catches damaging particles that the
stock fiber element can miss. Unlike other
designs that can let unfiltered oil flow directly
into the tank, STAGE TWO continues to protect
your engine when others fail. When the SUPER
FILTER’S bypass valve is activated, oil is diverted
to a second filter for reliable protection until
the next oil change. Available individually packaged in an attractive color box or with a point
of purchase counter top display. Fits most models with in-tank filters from 1953 thru 1983.
270015 Each . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
270017 Counter display carton of 24 . . . .$175.99
25547
Spin-On Super Filters
Sheetmetal
These superior quality oil filters feature an internal pressure relief valve and our highest density
filter material encased in a specially designed,
maximum flow housing. Available with chrome
or black finishes.
16
Short Filter
Fit all Sportster® models from 1980-early 1984,
and 4-speed Big Twin models (except Softail®
models) with factory-installed spin-on oil filters
270020 Chrome (repl. OEM 63782-80) . . . . .$7.10
Long Filters
Fit 5-speed Shovelhead and Evolution® Big Twin
models (except Dyna Glide models) from 1980
thru 1998, Sportster® models from late 1984
thru 2003, and all Softail® models from 1984
thru 1999, as well as most Harley-Davidson®
270000 Chrome (repl. OEM 63796-77A) . .$10.99
270001 Black (repl. OEM 63805-80) . . . . . .$10.99
Extra-Long Filter
Fit all Dyna Glide models from 1991 thru 1998,
Sportster® models from late 1984 thru 2003,
and all Big Twin models from 1992 thru 1999
(except Twin Cam 88® models).
270028 Chrome (repl. OEM 63813-90) . . . . $8.85
Filters for Twin Cam 88® Models
Fit Twin Cam 88® models from 1999 to present.
270002 Chrome (repl. OEM 63798-99) . . . .$13.99
270003 Black (repl. OEM 63731-99) . . . . . .$13.99
16.116
Chrome Fram® Oil Filters
Made to strict Fram specifications. Available
for most Sportster® and Big Twin models with
spin-on oil filters. Sold each.
Short Filter
Fit all Sportster® models from 1980-early 1984,
and 4-speed Big Twin models (except Softail®
models) with factory-installed spin-on oil filters
24923 Chrome filter, Fram #PH6068,
(repl. OEM 63782-80) . . . . . . . . . . . .$16.74
Long Filter
Fit 5-speed Shovelhead and Evolution® Big Twin
models (except Dyna Glide models) from 1980
thru 1998, Sportster® models from late 1984
thru 2003, and all Softail® models from 1984
thru 1999, as well as most Harley-Davidson®
24924 Chrome filter, Fram #PH6065A,
(repl. OEM 63796-77A) . . . . . . . . . . .$15.59
12272
Premium® Replacement Oil Filters
Filters do not include upper or lower seals.
12272 1954 thru 1983 models with filter in oil
tank (repl. OEM 63840-53) . . . . . . . .$2.49
25547 1940 thru 1963 models with external
oil filter (repl. OEM 63840-48A) . . .$3.29
Extra-Long Filter
Fit all Dyna Glide models from 1991 thru 1998,
Sportster® models from late 1984 thru 2003,
and all Big Twin models from 1992 thru 1999
(except Twin Cam 88® models).
24925 Chrome filter, Fram #PH6019,
(repl. OEM 63813-90) . . . . . . . . . . . . $12.49

16 - Custom Bikes by Mike

Transcription

Similar documents

FEB ZODIAC UPDATE_GBR.qxd

Kretschmar Premium Boneless Bavarian Ham For

Producers BIO pdf

online catalog

Brochure - Custom Chrome Europe

customchrome.com FIND A DeALer NeAr You customchrome.com

August 2016 - Heritage Senior Communities

2015 ICCA - 5 Star Media

View PDF