POWERPOD 620

POWERPOD 620
POWERPOD 620
200W 6-Channel Powered Mixer with DFX
● 100W + 100W power amplifier with built-in limiters
● 32/40-bit digital multi-effect processor with 16 programs plus parameter control and footswitch jack
● 7-band graphic EQ
● Two Super Hi-Z inputs optimized for direct instrument input
FEATURES
►
►
100W + 100W / 4 ohms dual power amplifier for Main
► Pad control on channels 1~4
or Main/Monitor (Bridge mono, 200W / 8 ohms)
► AUX input
32/40-bit digital multi-effect processor with 16
► Stereo RCA I/O
programs plus parameter control and footswitch jack
► Global +48V phantom power for mic inputs
►
Six balanced Mic inputs and eight Line inputs
► Built-in limiters
►
Two Super Hi-Z inputs optimized for direct instrument
► Monitor and effect sends on each input channel
input
► Drive level / effect out master control for signal sent
►
2-band EQ on each input channel
to effect processor
► 7-band master graphic EQ
The Phonic Powerpod Plus Series of Mixers are Powered Mixers built into a compact and
durable molded cabinet. Each Powerpod Plus has a built-in dual channel amplifier which is
bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. The mixers feature onboard DFX, our own 32/40-bit digital effects processors with 16
preset programs and parameter control for each effects main parameter. The 3-band EQ on
every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix.
16
and parameter control
V1.2
06/06/09
SEM PLUS
SEM 710 PLUS 10" 2-way Stage/Floor Speaker
SEM 712 PLUS 12" 2-way Stage/Floor Speaker
SEM 715 PLUS 15" 2-way Stage/Floor Speaker
FEATURES:
2-way
enclosure
Sensitivity (1 W @ 1 meter): 95 – 98 dB (depends on model)
10", 12" or 15" heavy-duty woofer and 1" tweeter
8 Ohm nominal load
35mm stand adaptor built in
Dual 1/4" phone jacks
Enclosure carpeted for increased protection
The SEM Plus 2-way Stage / Floor Speakers give you more power for your money. These starter units feature
10", 12" and 15" heavy duty woofers matched with a piezo tweeter. The units feature power handling up to 170
Watts (RMS) or 340 Watts (Program), making the SEM Plus series the perfect solution to a cost-efficient
speaker set up.
SEM PLUS
SPECIFICATIONS
SEM 710 Plus
Type
SEM 712 Plus
SEM 715 Plus
2-way Stage / Floor Monitor
Power Handling (RMS / Program)
Frequency Response
150W / 300W
170W / 340W
170W / 340W
65 - 20 kHz
60 - 20 kHz
50 - 20 kHz
96 dB
95 dB
98 dB
Yes
Yes
Yes
90 x 40
90 x 40
90 x 40
Sensitivity @ 1 W / 1 M (+/- dB)
Built-in Crossover
Dispersion Angle (Degrees)
Box
Dual Angled / Black Carpet
Handles
2
2
2
Stand Socket
35 mm
35 mm
35 mm
Nominal Impedance
8 ohms
8 ohms
8 ohms
2 x 1/4" phone jacks
2 x 1/4" phone jacks
2 x 1/4" phone jacks
Connector
491 x 351 x 314 mm 540 x 376 x 356 mm 679 x 476 x 388 mm
(19.3" x 13.8" x 12.4") (21.3" x 14.8" x 14") (26.7" x 18.7" x 15.3")
Dimensions (HxWxD)
Net Weight
11 kg (24 lbs)
BACK PANEL
V1.1 01/28/2008
Information in this document is subject to change without notice
13 kg (29 lbs)
19 kg (42 lbs)