operation manual model: rfx6000-sx

OPERATIO N MANUAL
MODEL: RFX6000-SX
((<Siriusxm>))
READY
RFX6000-SX
RFX-MR5BB
+DIGITAL AUDIO/VIDEO PLAYER
+ SiriusXM-Ready™
+AM / FM STEREO RADIO
+USB/SO MUSIC PLAY
+ BLUETOOTH STREAM
+Dual Zone
CONTENTS
CONTENTS .......................................................... 1
CONTROL PANEL ILLUSTRATION ......................... 2
WIRE DIAGRAM ................................................... 3
INSTALLATION.................................................... 4
BASIC OPERATION .............................................. 5
SiriusXM® OPERATION......................................... 6
RADIO OPERATION .............................................. 10
AUX/USB/SD OPERATION ..................................... 11
CDC OPERATION .................................................. 13
BLUETOOTH OPERATION ..................................... 14
SPECIFICATION .................................................... 15
TROUBLESHOOTING ............................................ 16
P1
CONTROL PANEL ILLUSTRATION
(~@@
(< Slr~!l.~~
',-, ,-, ,- ,-,
r·,- ,, ,, '
I I
II I
I
-
RFX-MR58
AlPS
I ••,
.- -
>))
CH
(') (')
-'
I '-' '-' '~,
~fi;; ~;
MEDIA PLAYER 4X OWATTS
BAND
SCAN
@
@
MENU
•
(OPTION)
POWER ON/OFF
(g\.. FUNCTION SELECT BUTTON
(~!.VOLUME UP/DOWN
({). MODE BUTTON
(~).DISPLAY BUTTON
(~).AUTOMATIC OR MANUAL TUNING
(FREQ
UP~+~
OR FREQ DOWN
1+11 )
(7_). AUTO STORE AND PRESET SCAN/MENU(AS/PS)
/SELECT TRACK/CHANNEL SWITCH
(~).BAND/CDC DISC UP/ -10 TRACKS
C9J. AUTOMATIC TUNING CONTROL(SCAN)
/CDC DISC DOWN/ +1 0 TRACKS
dQ!. PRESET 1, PLAY/PAUSE
@.PRESET 2, REPEAT PLAY
@. PRESET3,RANDOM PLAY
@.PRESET 4/LEFT
@.PRESET 5/DOWN(ENTER)
~-\-(g)
@.PRESET 6/RIGHT
,.......,...___,.___'Y'.r----~f--Tr--Jt\-t-
@.MENU/DIMMER SETTING BUTTON/UP
G). LCD DISPLAY
@.MUTE
P2
(6)
WIRE DIAGRAM
* IMPORTANT NOTE:
When using cables RFX10, RFX16 and RFX 30 for
runs longer than 50 feet, use RRAMP1 to increase
signal quality. Maximum distance is 150 feet. Install
RRAMP1 inline before cable extensions. (Unit side)
c
e
u..
I
BLACK
GROUND(-)
RED
IGNITION SWITCH (B+)
POWER
ANTENNA
MEMORY
YELLOW
BACK UP
FRONT
LEFT
SPEAKER
+WHITE
REAR
LEFT
SPEAKER
+GREEN
GREY+
-WHITE/BLACK
VIOLET+
-GREEN/BLACK
VIOLET/BLACK-
FRONT
RIGHT
SPEAKER
REAR
RIGHT
SPEAKER
Fuse replacement
If there is an issue with the fuse, be sure to check all power connections and replace
the fuse with same type and rating. If a fuse blows after replacement, you may have
an internal malfunction with the unit. Please consult with your nearest repair center.
Warning:
When replacing the fuse, be sure to use the same type and rating of the
existing fuse. The use of a varying type or rating may cause serious
damage to the unit.
Be sure your wire remote(RFX-MR8/RFX-MR6.5) is installed correctly,
wrong connection will cause serious damage to the wire remote.
P3
INSTALLATION
1. Precautions
Carefully choose a mounting location so that the unit will not interfere with normal
driving functions of the vehicle.
Avoid installing the unit where it will be subjected to excessive vibration, dirt and high
temperatures, including direct sunlight, engine compartment heat and engine exhaust.
Use only the supplied mounting hardware for a safe and secure installation.
2. Mounting illustration
Correct mounting positions
Best: 90 facing upward
Better: 45 facing upward
Incorrect mounting positions
Do not mount the black box in
either position shown. Doing
so will allow water to travel
inside the unit causing damage.
3. Installation Note
Use the enclosed nylon wire tie-downs (wire clamps) for additional support. Using the
wire tie-downs to hold down the wire harness will aid in preventing water from migrating
along the wires and into the unit.
P4
BASIC OPERATION
Power· ON/OFF (1)
Press this button to turn unit ON or OFF.
SEL- Function Select Button (2)
Press the "SEL" button repeatedly to scroll through the functions BAS> TRE >FAD> SUB>
DSP >REAR ZONE (SOURCE)> REAR ZONE (VOL). Once desired function is selected,
use the VOL buttons to change the setting value.
Press and hold the SEL button to enter zone selections. Short press the SEL button repeatedly
to scroll through the
Zone: America/China/Europe
Beep: Activates Beep On/Off
Clock: 12/24 hour format
TRI1: Activates Trigger 1 On/Off (Switched 12V). This trigger is set to "ON" by default.
TRI 2: Activates Trigger 2 On/Off (Switched 12V). This trigger will need to be reactivated if unit is
disconnected from power source.
VOL- Volume Up/Down (3)
Press the UP arrow button to turn the volume up to the desired listening level.
Press the DOWN arrow button to turn the volume down to the desired listening level.
MODE button (4)
Short press the "MODE" button to switch through modes: FM/AM > AUX1 > AUX2 >SIRIUS> BT >
USB> SD >CDC
Long press the "MODE" button to switch through REAR ZONE options: R ZONE
Source> R ZONE Volume.
DISP- Display Button (5)
Press the "DISP" button to toggle the system time On/Off on the LCD.
Adjusting Time (Clock)
Press and hold the "DISP" button until the hour digit starts to blink, use the ~I 11.- to adjust hour.
Once hour is set, press "DISP" again to adjust minute using the ~I 11.- buttons.
Adjusting backlight- MENU (16)
Press the "MENU" button for more the 2 seconds to adjust the backlight brightness on the LCD.
(25o/o, 100°/o)
Low Voltage Warning
When the vehicle's power supply drops below 10 volts, the LCD will display "BATTERY LOW" and
the system will beep for 1 minute. The black box will turn off automatically after the 1 minute period.
Locking the Control Panel
To lock the RFX-MRSBB control panel, press and hold "SEL" and "DISP" buttons simultaneously for
3 seconds. The black box will not respond when button are pressed on the control panel. Press and
hold "SEL" and "DISP" buttons for 3 seconds to unlock the control panel.
Rear Zone Operation
The purpose of this feature is to take advantage of playing dual media sources simultaneously.
Each zone has the ability to have its own media source along with independent volume control.
These functions can be accessed through the RFX-MRSBB control pa·nel or through wired
remote connections.
Audio Source
Long press the "MODE" button, select REAR ZONE Source. Use the Volume buttons to scroll
through available sources. Press "SEL" to select source for audio playback.
Audio Source Volume
Long press the "MODE" button, select REAR ZONE Volume, use the "VOL Up" and "VOL Down"
buttons to increase and decrease the volume to a desired level.
Note: Please note if the. USB/SO mode is playing in the front zone, the SO/USB mode cannot be
selected in the rear zone.
PS
SiriusXM® OPERATION
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 150 channels,
including commercial-free music plus the best sports, news, talk,comedy and entertainment.
Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For
more information, visit www.siriusxm .com."
Activating your SiriusXM subscription:
After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your RFX6000 and
select SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. If you
cannot hear the preview channels, please check the installation instructions to make sure your
SiriusXM Connect tuner is properly installed.
After you can hear the Preview channel, tune to Channel 0 to find the Radio ID of your tuner. You will
need this number to activate your subscription. Write the number down for reference.
Note: the SiriusXM Radio ID does not include the letters I, 0, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
e Visit www.siriusxm.com/activatenow
e Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
Visit www.siriusxm.ca/activatexm
e Call XM customer Care at 1-877-438-9677
e
Note, the activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio
will need to be powered on and receiving the SiriusXM signal to receive the activation message.
MODE (4)
• Mode Selection
Short press MODE button to select SiriusXM mode.
Note: If there is no SiriusXM TUNER connected this mode will be skipped. Please
connect your SiriusXM Tuner to the SiriusXM port located at the back of the unit.
Then press MODE button to change to SiriusXM mode.
DISP(S)
e Display Mode Selection
Short press DISP button repeatedly to switch different display mode. You can choose
betweenChannel Number- CH/
Channel Name- CHANNEL/
Category Name- CATEGORY /
Artist Name -ARTIST/
Song Title- SONG/
Content Info- INFO/
&(repeat)-
SEEK+ /SEEK- (6)
• Channel Browsing
When the Category Browsing mode is off, short press the buttons to start browsing
all channels. Press the SEEK+/SEE K- key to browsing next/previou s channels,
Press the SEL key to select the channel showed on LCD and play it. If there is no key
pressed in 5s, the LCD will change back to display current playing channel
information again.
P6
SiriusXM OPERATION
• Category Browsing
In the Category Browsing mode, short press the buttons to start browsing channels
in current category. Press the SEEK+/SEEK- key to browsing next/previous channels,
Press the SEL key to select the channel showed on LCD and play it. If there is no key
pressed in 5s, the LCD will change back to display current playing channel
information again.
• Rapid Channel Browsing
When the Category Browsing mode is off, press and hold the buttons goes into rapid
channel browsing mode, you can browsing all channels in higher speed, if you release
the touch key, the LCD will show the information of the last browsed channel. Press
the SEL key to select the channel showed on LCD and play it. If there is no key
pressed in 5s, the LCD will change back to display current playing channel
information again.
• Category Selection
In the Category Browsing mode, long press and hold the buttons over 2S to select
previous/next category without press SEL key.
AS.PS {7)
• Direct Channel Tuning
Short press this button, the first character of the channel number will flash. Press
the Volume up and down buttons to select number 0-9 and press SEL key to enter
then the second character flash. Use the same operation to select third character.
After select the last number, press SEL key to enter and play the selected channel.
BAND {8)
• Banks Selection
In SiriusXM mode, short press this button to change the bands. The current bands
will change in the following order: SXM1- SXM2- SXM3
PRESET 1-6 {10/11/12/13/1 4/15)
• Store Preset Channel
Long press a PRESETS button, the current channel will be stored, and the
corresponding preset number will appear in the display. The PRESETS buttons can
be used to store 6 channels in each bands(SXM1, SXM2, and SXM3) for convenient
access to your favorite channels.
• Recall Preset Channel
To recall a preset channel, select a band of channels (if needed).Short press a
Presets button and the unit will turn to the corresponding .stored channel.
P?
SiriusXM OPERATION
SCAN(9)/MEN U (16)
• Channel Scanning
Short press SCAN button to scan all the channels. The unit will keep on scanning
every 5 seconds per channel until you press the SCAN button again to stop scan
function.
• Channel Category Mode
Short press MENU button to enter category mode while "CAT ON" will show in the
screen field, when short press again, the category setting will be off, and "CAT OFF"
will show.
PARENTAL CONTROL
You can lock any SiriusXM channels you do not want others to have access without
your permission. The default code is "5220". In case you forget your code please
execute the default reset operation or disconnect the unit completely from the battery
to resume the default code.
e GUIDE ON HOW TO ENTER THE CODE USING THE VOLUME BUTTON
When the first character is flashing, Press the Volume up and down butt~ns to select
5 and press SEL key to enter then the second character flash. The same operation to
select the rest character "2","2","0".Whe n done, press SEL key to confirm.
.
e TOLOCKACH ANNEL
Select a channel that you wish to lock then long press SCAN button -"CH LOCKED"
will show on the display. Enter the code then press SEL key to confirm -"Channel
Locked" will show on the display
e TO ACCESS A LOCKED CHANNEL
You can access a locked channel by channel browsing method or direct tunning method, you are
requested to enter the passcode before access the locked channel. The content metadata(Artist
Nme/Song Title/Content Info) would not allow to be displayed when you browse to a locked channel
without enter the passcode.
e
TO UNLOCKACH ANNEL
Select the locked channel that you wish to unlock then long press SCAN button" UNLOCK CH" will show on the display. Enter the code then press SEL key to confirm
- "Channel Unlocked" will show on the display
e TO CHANGE THE CODE
Press and hold MENU Button -"OLD CODE" will show on the display. Enter the old
code then press SEL to confirm -"NEW CODE" will show on the display. Enter your
new code then press SEL again to confirm -"SETCODE OK" will show on the display.
e LOCKEDCHAN NELMANAGE MENT
When you want to browse all the locked channels, press and hold "MODE" button
and "1" button simultaneously to enter the locked channel browsing mode. You can
browse the entire locked channel by pressing the Volume up and down buttons after
entering the correct passcode. Select a locked channel and press SEL key if you
want to clear that locked channel. To clear all the locked channels except the enable
Mature channels , just press the Volume up and down buttons until the advisory
"CLEAR ALL LOCKED" display, then
P8
SiriusXM OPERATION
press the Enter button to execute. If you want to change the enable/disable status
of the mature channels, you just press the Volume up and down buttons until
the advisory "LOCK/UNLOC K MATURE"displ ay, press the SEL key to switch.
MODE(4) + BAND(8)
• Default Reset
In SiriusXM mode, press and hold BAND and MODE button to reset the SiriusXM
mode to the factory default setting. When finished the reset operation, the locked
channels will be unlocked, the mature channels will be unrestrained, the presets
storing will be cleared, the parental control passcode will be resumed to default
passcode, etc.
TROUBLESHO OTING
PROBLEM
CORRECTIVE ACTION
CAUSE
SiriusXM mode can not be
selected
Make sure to choose the
USA AREA in tuner region
setting
Check Tuner CDisplay
message in SiriusXM mode)
Check the SiriusXM tuner
connection on the back of the
unit to ensure that it's
correctly connected.
Ensure the SiriusXM antenna
cable is connected to the
SiriusXM tuner correctly.
Check the SiriusXM antenna
wire for breaks or sharp
bends. Replace the antenna if
necessary. If the message
remains, the antenna may
have been damaged.
The vehicle must be outside,
and the antenna must have a
clear view of the southern
sky. The magnetic antenna
must be mounted on the
outside of the vehicle for the
best reception.
Check Antenna CDisplay
message in SiriusXM mode)
No Signal CDisplay message
in SiriusXM mode)
Current channel not included in
your subscription package. Call
SiriusXM to subscribe:
Channel Not Subscribed
CDisplay message in
SiriusXM mode)
-In the USA call 1-866-635-2349
- In Canada call 1-877-438-9677
P9
SiriusXM OPERATION
TROUBLESHOOTING
Channel Not Available
CDisplay message in
This channel is not a valid
SiriusXM mode)
channel
channel.
SiriusXM
The
number has been
entered incorrectly, or the
channel was removed from
the SiriusXM channel lineup.
Channel Locked CDisplay
The selected channel has
message in SiriusXM mode)
been locked by the parental
controls, or a mature channel
has been selected. A prompt
to enter the unlock code will
appear. Enter the unlock code
as described on page 9.
Subscription UpdatedC Display
An update to your SiriusXM
message in SiriusXM mode)
subscription has been
received by the SiriusXM
tuner.
Press any button to
continue.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio inc. All
rights reserved.
RADIO OPERATION
Listening to the radio
To select the radio mode, press the "MODE" button and select FM/AM. Once selected the
radio frequency will be displayed. To change the frequency band, press the "BAND" button
to scroll through the band selections FM1 > FM2 > FM3 > AM1 > AM2
Tuning
There are three options of tuning available: SEEK, MANUAL and PRESET stations
SEEK (Auto seek a station)
When the radio is on the desired band, the tuner will automatically select the next available
radio station as you press~l orl~ buttons.
MANUAL tuning
When the radio is on the desired band, pressing the~l orl~ for longer than 2 seconds will
allow for manual tuning of the radio.
PRESET (Storing a station)
When the radio is on the desired band and station, press and hold "PRESET" buttons
1 - 6 to store the radio station.
SCAN -Automatic Tuning Control (9)
While in radio mode, press the "SCAN" button to scan through radio stations. The radio
will pause for 5 seconds at each detected radio station. Pressing the "SCAN" button
again will stop the scan feature on the current station.
P10
RADIO OPERAT ION/ AUX
A/PS- (7)
To scan preset stations on the current band, short press the "A/PS" button. The radio
will pause for 5 seconds at each preset station.
To automatica lly search and store radio stations, long press the "AlPS" button. The
tuner will seek six stations and store them on the 1-6 preset buttons.
AUX-IN Port
This port is available for portable media players using a 3.5mm (1 /8") audio jack.
USB/SO OPERATION
When a USB device with audio/video /picture files is plugged, a menu will be
displayed on external LCD.
1---
~ U-.~~_§_L:_!l_tj,§.~.~_Q-·--···-··-·--·--··--··-··-----·---·-. · ---·--... . . . . . . ,_ _ ___,__,_] - B
01.\
..f'i
..f'i
..f'i
..f'i
..f'i
L_; 02.MYMUSI-1
01-HAPPY DAY
02-HELLO
03-0NL Y YOU
04-MY LOVE
05-MYOH MY
The menu can include six blocks:
(~ )
~ I [ MYMUSI-1 ] HELLO
B
01.\
..f'i
..f'i
..f'i
..f'i
..f'i
L./ 02.MYMUSJ-1
(~)
(g)
01-HAPPY DAY
02-HELLO
03-0NLYYOU
04-MY LOVE
05-MY OH MY
(§)
P11
(~)
USB/SO OPERATION
USB
Block 1:
Block 2:
Block 3:
Block 4:
Block 5:
Block 6:
Current File Playing. This area shows what is currently playing.
Folders. All available folders will be displayed in the area.
Media Files. The media files are displayed in this area.
Audio Source
Picture Source
Video Source
When one of Blocks 4/5/6 are selected, the corresponding media folders and files are
displayed in Blocks 1 and 2.
Operation Tips:
• You can use the RFX-MR5BB control panel to select different media sources and files.
• On the RFX-MR5BB, the "MENU" button is for navigating UP, "Preset 5" is for DOWN,
"Preset 4" is for LEFT and "Preset 6" is for RIGHT. Long pressing "Preset 5" will confirm
your selection.
• Use the "Preset 1" button to "Play/Pause" media files (Audio/Video/Pictures).
• For fast searching, press the "SCAN" and "BAND" buttons. The "SCAN" button is for
"1 0+" and the "SCAN" button is for "1 0-".
• The unit can support playing music by inputting the song's sequence number directly.
This is helpful if you kn~w the sequence number of the song in which you want to play.
While the unit is playing, press "AlPS" on the front panel. This will bring up "SCHOOOO"
on the LCD display. The four digits represent the song's sequence number. To set the
four digits of the song you want to play, press the "Preset 1-4" buttons to change the
sequence number. Press "SEL" to confirm the input and the desired song will begin to
play.
• When the unit is playing Video or Pictures, long press "Preset 1" to exit Play mode
SD
When using a SD card with a card, the unit will automatically turn to "SD" mode and begin
playing audio files from the card. "SD" mode operates and functions the same as "USB"
mode.
Important Notice
Due to varying product specifications in regards to USB/SD manufacturing specific
functions, we cannot guarantee that all devices will be recognized and work as
intended.
Some USB/SD devices may take more than 45 seconds to initiate after being plugged in.
P12
CDC OPERATION
CDC Operation
1. Press <!> button On
2. Connect the CDC to the black box. Once plugged in press "MODE" to scroll through
display until you fined CDC mode.
3. The LCD will display "Disc Style", "Item Number", "Playing Time"
4. Press"
~~
" button to pause playback
5. Press the Preset 2 (11) button to activate REPEAT playing mode
6. Press the Preset 3 (12) button to activate RANDOM playing mode
7. Follow the function key instruction to do the operation.
8. Pressing the "SCAN" button will function as the "Next Disc" button and pressing
"BAND" will function as the "Previous Disc" button for changing discs in the changer.
Notes for CD
1. Keep discs clean and undamaged.
2. Do not play discs that are damaged or warped.
3. Do not expose discs to direct sunlight or store in a high temperature environment.
4. Store discs in their case after use.
5. Fingerprints and scratches will affect the quality of disc playback. Use a soft cloth to
gently clean disc. If necessary, the use of a diluted natural solvent can be used to
help clean the disc. Record cleaner or an antistatic solvent can not be used to clean
discs.
P13
BLUETOOTH OPERATION
(BLUETOO TH DONGLE)
MODEL: RFX-BTD2
Installatio n Note for Bluetooth Dongle
For optimum signal, the Bluetooth Dongle should be installed near the surface and
should avoid metal surfaces. Installation behind or under metal surfaces will create a
weak Bluetooth signal.
Bluetooth Mode
Press the "MODE" (4) button repeatedly to scroll through available sources and select the
BTD2 mode.
To Pair with a Bluetooth device
The unit is ready to pair with the BT mode is selected and make sure you are in close
proximity to the dongle.
1 .Open the Bluetooth settings on your device.
2. Select "RFX6000- SX" from the list of available Bluetooth devices
3. Enter "0000" as the password for pairing
To Play music from a Bluetooth device
Once the device is paired, the unit is ready to play music from the device.
• Pressing the ..,II button will start and stop the audio playback from the BT device
• To change the track being played, press the ~JJ+I or 1._ buttons
To disconnect the current Bluetooth device from the unit, simply press and hold the "A/PS"
button. This will disconnect the device but it will not erase the pairing from the memory.
To erase all Bluetooth pairings stored in the unit's memory, press and hold the "SCAN" button.
Play the Bluetooth music
When you succeed in pairing the Bluetooth device,you can play the Bluetotth music
on your device.
a. Press the previous/ne xt key to change the track.
b. Press the play/pause key to start or pause the audio.
c. Press and hold A/PS key to disconnect the current Bluetooth device from the unit,
but this will not erase the pairing from unit memory.
d. Press and hold SCAN key to erase all Bluetooth pairings stored in the uint memory.
P14
SPECIFICATION
TUNER(FM)
Frequency Range ................................... .................. 87.5-107.9 MHz
Channel Step ................................... ....................... 200KHz
Sensitivity
................................... ......................... BdB
Stereo Separation ................................... ................. 30dB
Signal to Noise Radio ................................... ............. 60dB
TUNER(AM)
Frequency Range ................................... ................. 530-171 0 KHz
Usable Sensitivity ................................... ................. 32 dBuV
Channel Step ................................... ....................... 1OKHz
Signal to Noise Radio ................................... ............ 50dB
LINE-OUT
Output. ................................................................. 3 Volt (max)
lmpedance ........................................................... 33 Ohm
GENERAL
Power Supply................................... ....................... 13.8V DC (1 0-15.6V allowable)
Speaker Impedance ................................... .............. 4 or 8 ohm
Output Power................................... ........................ SOW x 4CH
Fuse ................................... ................................... .. 10A
Note: Specifications and the design are subject to possible modification
without notice due to improvement.
P15
TROUBLESHOO TING
Unable to read some USB devices
The unit is not compatible with all USB devises. Try formatting the USB device in FAT
16/32 standard.
Cannot play certain song formats downloaded from websites
The unit does not currently support file in DRM (Digital Right Management) format.
Takes 60 seconds for unit to recognize USB device.
This is normal operation for the unit. Some USB devices take longer than others
depending on file size and quantity loaded.
LCD Cannot display the MP3 song name correctly
The audio files are not tagged properly with 103 format or they are in a foreign language.
Power does not turn on (no sound)
Check wiring and connections along with the fuse in the unit. If the fuse is blown, replace.
If this happens again, consult your nearest dealer.
No sound output when operation the unit with amplifiers or power antenna attached
The power antenna lead could be shorted to the ground or there may be excessive current
that is required for the amplifiers or power antenna to operate.
Buttons are not responsive or the LCD display is wrong
The connections for the front panel may be loose or dirty. Tighten connections and use a
soft cloth to clean. If this doesn't solve the problem, consult with your nearest dealer.
The unit picks up engine noise
Check the ground wire connection.
After unit powers on, the unit immediately powers off
The battery voltage may be too low. Operating voltage should be between 11 v to 16V.
If the unit still cannot power on, consult with your nearest dealer.
RFX-MRSBB button fail to respond
Check if the unit has been locked. Press and hold "DISP" and "SEL" buttons to unlock.
Rear Zone Operation
The purpose of this feature is to take advantage of playing dual media sources simultaneously.
Each zone has the ability to have its own media source along with independent volume control.
These functions can be accessed through the RFX-MRSBB control panel or through wired remote
connections.
Audio Source
Long press the "MODE" button, select REAR ZONE Source. Use the Volume buttons to scroll
through available sources. Press "SEL" to select source for audio playback.
Audio Source Volume
Long press the "MODE" button, select REAR ZONE Volume, use the "VOL Up" and "VOL Down"
buttons to increase and decrease the volume to a desired level.
Note: Please note if the USB/SO mode is playing in the front zone, the SO/USB mode cannot
be selected in the rear zone.
WARRANTY INFORMATION:
Should this product require service, you may obtain specific information by contacting the
dealer from whom this product was purchased.
For any service related questions, please call our technical service team.
Technical Support Phone Number:574-293-1521
P16
DIG I PORT OPERATION .
Connecting the compatible digital MP3 players
A special digi port adaptor is needed to connect the compatible digital MP3 players.
Users need purchase this adaptor separately and connect this adaptor to the digi
port at the rear of the unit.
Please contact the dealers for the list of compatible digital Mp3 players.
Playing songs in digital MP3 player
1. Press MODE repeatedly until the digi port mode is displayed in the LCD.
2. Press IJI-fl to pause the· playing, press again to resume.
3. Press menu to enter menu selection ,you can press~, ... to switch between
folders(PLAYLIST,ALBUM,ARTIST etc.)and press SEL to select the folder or
play the songs. When you are selecting between the menus, simply press this
key to return to up one level menu.
4. Press and hold~ I ... , it will fast forward /rewind the song in playing.
5. Fast search(A/PS)
The marine unit can support playing the music in players by inputting the song
sequence number directly: when the unit is playing songs, press A/PS button
on the front panel, it will display "SCH 00000" on the LCD, the five digits
indicates the sequence number that you want to listen to. You can use preset
key 1 ,2,3,4,5 to set the five digits by pressing them repeatedly and press SEL to
confirm input, the unit will start playing the new song automatically.
6. Playing mode switch
The RFX4000-SX/RFX6000-SX unit will control and play the music in the digital MP3
players when the digital MP3 players are connected to the RFX4000-SX/RFX6000-SX
Press and Hold "SEL" and "SCAN" buttons together for 3 seconds to change
current playing mode to the direct mode, in this mode users can control and play
the music by the digital MP3 player, press and hold the two buttons again to switch
back to the default playing mode.
Please
Note~
RFX6000-SX gets 2 DIGI PORT wires DIGI PORT1 and DIG I PORT2, but only support 1 DIG I
-Device for playing and charging, 2 DIGI-Devices plugged at the same time is not allowed.