CUSTOM DRUM PARTS AND ACCESSORIES

CUSTOM DRUM PARTS
AND ACCESSORIES
“JAW” Hoop Mountable
Multi-Purpose Holders
Throne Separates
Bases
Hoop Clamping Jaws
SC-JPM
GIBRALTAR THRONE SEATS AND
THRONE BASES Available separately.
All seats fit into Gibraltar throne bases or any
7/8” dia. shaft. All seats and bases
are covered under Gibraltar’s 3-year warranty.
NEW
SC-JCM
SC-JDRM
SC-JMM
NEW
SC-JMM
SC-JDRMM
B9508
Rod Clamping
Jaw
Note: Clamps on conga and
timbale tension rod.
SC-JCMTR
SC-JPMTR
B9508EX
2
CONTENTS
Contents:
Page No.
“Jaw” Multi-Purpose Holders . . . . . . . . . . . . . . . . . . . . . . . . .2
Gibraltar Tom Suspension System . . . . . . . . . . . . . . . . . . . .10
Drum Throne Separates . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Cymbal Arms & Mounting Systems . . . . . . . . . . . . . . . . .10-11
Gibraltar Throne Seats (Roc-N-Soc) . . . . . . . . . . . . . . . . . . . .3
Multi-Clamps & Spanner Parts . . . . . . . . . . . . . . . . . . . . . . .12
Special Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cymbal Stand Parts & Rubber Feet . . . . . . . . . . . . . . . . . . .13
Snare Drum & Tom Tom Parts . . . . . . . . . . . . . . . . . . . . . . . . .4
Hi-Hat Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .13
Snare Drum Snares & Parts . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hand Percussion Mounting Systems . . . . . . . . . . . . . . . .14-17
Bass Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . .6
Hand Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . .17
Bass Drum Pedal Parts & Accessories . . . . . . . . . . . . . . . . .7
Gibraltar Power Rack Parts & Accessories . . . . . . . . . . . . .18
High-Use Bass Pedal Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rack Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Tom Tom Mounting Systems . . . . . . . . . . . . . . . . . . . . . . . .8-9
Gibraltar Road Series Parts & Accessories . . . . . . . . . . . . .19
Notes: Specifications subject to change without prior notice. DW, GMS, Ludwig, L.P.,
Mapex, Noble & Cooley, Pearl, Premier, Remo, R.I.M.S., Sonor, Tama, and Yamaha are
registered trademarks of each respective company.
Gibraltar Throne Seats
By Roc-N-Soc
Throne Seats
CONVENTIONAL SIZED SEATS
S9508RB
S9508R
RSGRC
RSGBR
RSGMC
OVERSIZED SEATS
“Super Lock”
seat fastening system
RSGRTC
S9508MB
Special
Holders
NEW
9508OSS
SC-SDH
S9508C
S9508M
OVERSIZED SEATS
SC-SH
3
“JAW” Multi-Purpose Holders
Gibraltar’s “Jaw” percussion clamps are
designed to provide an easy uncluttered
way of mounting various percussion
instruments or microphones to drums,
congas, bongos and other instruments
via their hoop or tension rod.
JAW HOOP MOUNTS
NEW
SC-JMM - Mic Holder. 1 pk.
40.50
SC-JPM - Percussion Holder.1 pk. 40.50
SC-JCM - Cymbal Holder. 1 pk. 40.50
SC-JDRM -Double Ratchet Mount. Allows
more adjustability. Can be used with
9.5mm L-Rod. 1pk.
33.50
SC-JDRMM - -Double Ratchet Mic
Mount. Same as SC-JDRM, but includes
Mic Mounting Rod. 1pk.
40.50
JAW TENSION ROD MOUNTS
SC-JPMTR - Percussion Mount for
Tension Rod mounting. 1 pk.
40.50
SC-JCMTR - Cymbal mount for tension
rod mounting. 1 pk.
40.50
THRONE BASE ASSEMBLIES
B9508EX - Double-Braced Extended
Height Throne Base.
117.95
B9508 - Double-Braced Throne
Base.
114.95
THRONE SEATS
Gibraltar throne seats are equipped
with the new super lock throne seat
fastening system. This provides rock
solid support with more durability.
All Gibraltar seats utilize a molded
foam material. This firmer material provides better lower back support and
comfort.
S9508RB - Round Vinyl Seat with
Backrest.
110.95
S9508R - Vinyl Round Seat.
59.95
S9508MB - Oversized Cordura/Vinyl
Moto Style Seat.
138.95
S9508C - Round Cordura Seat with
Thigh Cut Outs.
80.95
S9508M - Moto Style Cordura/Vinyl
Seat.
91.95
9508OSS - Oversized Drum Seat
16” Dia..Stainless Steel throne
bracket.
119.95
RSGMC - Oversized Motorcycle
Seat.
149.95
GIBRALTAR THRONE SEATS
BY ROC-N-SOC
SPECIAL HOLDERS
NEW
Gibraltar offers three throne seats
designed and manufactured for
Gibraltar Hardware by Roc-N-Soc
USA. All seats fit onto a 7/8” dia.
shaft. Each seat utilizes Roc-N-Soc’s
oversized design and premier foam
and covering material which will
provide years of solid support.
RSGRC - Oversized Round Seat.
144.95
RSGBR - Backrest Attachment For Gibraltar/Roc-N-Soc seats. 102.95
RSGRTC - Oversized Round Seat
with thigh cutouts
144.95
SC-SDH - Soft Drink Holder - Soft
nylon holder clamps to any stand.
Now fits 1 liter bottles and most drink
containers. 1 pk.
25.95
SC-SH - Stick Holder - 3-1/2” dia.
holder holds up to six pairs of sticks.
Detachable soft bag clamps to various
drum stands. 1 pk.
25.95
Snare Drum & Tom Tom Parts
SC-4235
SC-1410SS
SC-4400
SC-4E
SC-4B SC-4C
SC-4J
SC-SSW
SC-1410BS
SC-LG
SC-11C
SC-LN
TENSION RODS AND SNARES GLOSSARY
Key Rod - Tension rod with drum key style head. Generally used
on snare drums, tom toms, and at the bottom of a bass drum.
T-Rod - Tension rod with T-handle. Used on bass drums.
DIAMETERS
SC-1410SSD
7/32" - Fits toms and snares for Pearl, CB, Mapex, Tama, Ludwig,
GMS, Legend, Noble & Cooley, Premier and most other manufacturers with the exception of Sonor.
SC-1410BSD
Note: 7/32" rods will fit D.W. drums prior to 1996 production.
6mm - Fits bass drums for Pearl, CB, Mapex, and other generic
Taiwan-made drums. Other manufacturers generally use 7/32"
dia. bass drum key rods (see chart on page 7).
NEW
SC-4244
LENGTHS
SC-4J - 1-3/8" (35mm) - Fits many piccolo snare drums and small
tom toms.
SC-4C - 1-5/8" (41mm) - Fits many snare drums, small and medium toms, and some floor toms.
SC-4248
SC-4245
SC-RLW
SC-4B - 2" (51mm) - Fits toms and floor toms with a lot of space
between hoop and tension casing.
SC-4E - 2-3/8" (58mm) - Fits some floor toms and bass drums.
4
STEEL POWER HOOPS
SNARE SIDE HOOPS
2.3mm heavy-duty chrome drum hoops.
Provide consistent shape/ tension and
clearer sound.
SC-1006SS
SC-1206SS
SC-1308SS
SC-1408SS
SC-1410SS
BATTER SIDE HOOPS
-
10”/6 Lug. 1 pk.
12”/6 Lug. 1 pk.
13”/8 Lug. 1 pk.
14”/8 Lug. 1 pk.
14”/10 Lug. 1 pk.
SC-0804TT - 8”/4 Lug Tom.1 pk. 16.50
17.95
19.50
23.50
23.95
23.95
NEW
SC-1006TT - 10”/6 Lug Tom.1 pk. 17.95
DIE CAST HOOPS
SC-1206TT - 12”/6 Lug Tom.1 pk. 19.50
Custom designed top and bottom die
cast hoops feature reinforced tension
points, large snare gates, and highly
polished chrome finish. Slightly oversized, our hoops allow snare drums
to project without choking or restricting
the head in any way.
SC-1308BSD - 13”/8 Lug Batter Side.
1 pk.
79.95
SC-1308SSD - 13”/8 Lug Snare Side.
1 pk.
79.95
SC-1410BSD - 14”/10 Lug Batter Side.
1 pk.
79.95
SC-1410SSD - 14”/10 Lug Snare Side.
1 pk.
79.95
SC-1306TT - 13”/6 Lug Tom.1 pk. 21.95
SC-1308BS - 13”/8 Lug Batter Side.
1 pk.
22.50
SC-1408BS - 14”/8 Lug Batter Side.
1 pk.
21.95
SC-1410BS - 14”/10 Lug Batter Side.
1 pk.
20.95
SC-1508TT - 15”/8 Lug Tom.1 pk. 23.95
SC-1608TT - 16”/8 Lug Tom.1 pk. 20.95
SC-1808TT - 18”/8 Lug Tom.1 pk.22.95
DRUM KEYS & TONE CONTROLS
KEY RODS/TENSION RODS
SC-4244 - Standard Drum Key - 1/4”
socket fits all standard drum tension
rods. 1 pk.
3.75
(7/32” DIA.)
SC-4245 - High Torque Drum Key Fits all standard tension rods. Larger
shaft and handle section for more
tension. 1 pk.
4.50
SC-4248 - Speed Key - Crank-shaped
key to speed head changes. 1/4”
socket. 1 pk.
6.50
SC-4B - 2” (51mm) Tension Rods.
6 pk.
4.50
SC-RLW - Ratchet Lug Wrench
1 pk.
17.50
SC-4235 - External Tone Control Hoop-mount tone control device
attaches to virtually any tom tom
or snare drum. 1 pk.
15.95
SC-LG - Lug Nuts - Swivel nuts fit
most bass drum tension lugs.
(6mm dia.) 12 pk.
4.50
SC-4400 - Internal Tone Control Mounts inside drum with adjustment on
exterior. Exerts pressure by felt pad
against head. 1 pk.
15.95
SC-SSW - ABS Tension Washers 10 pk.
9.95
SC-4E - 2-3/8” (58mm) Tension Rods.
6 pk.
4.50
SC-4C - 1-5/8” (41mm) Tension Rods.
6 pk.
4.50
SC-4J - 1-3/8” (35mm) Tension Rods. 6
pk.
4.50
SC-LN - Small Lug Nuts - Swivel nuts
fit most tom tom tension lugs. (7/32”
dia.) 12 pk.
4.50
SC-11C - Tension Rod Washers 24 pk.
5.95
Snare Drum Snares & Parts
SC-016A
SC-216A
SC-1316
SC-360A
SC-4471
SC-4459
SC-4467
SC-4467L
SC-363E
WIRE SNARES (SNARE DRUM SNARES)
DESCRIPTIONS
SC-4385
SC-STO
• INCHES - This designates the diameter drum the snare is designed to fit.
It may not be the actual length of the snare wire assembly.
SC-PTO
• STRANDS - This is the amount of snare wires on each snare.
• Normal Fit - Most snares do not fit past the edge of the snare side drum
head. (This includes all Gibraltar snares except SC-4467L and SC-363E.)
• Extended Length - Some snare drums utilize snares which fit over the
edge of the snare side hoop. The SC-4467L will fit most drums with this
feature.
• Special Snares -The SC-363E fits Ludwig Super Sensitive Snare drums
with non-individually adjustable snare wire systems and a Yamaha model
which utilizes split snares.
SC-SC
SC-SSC
5
Note: Gibraltar snares are designed to fit many manufacturers' snare drums. They are
made to fit snare drums ranging from 10" to 14" in diameter and are primarily designed
for Jazz, Rock, and concert performance applications. Gibraltar snares are not designed
for super high-tension applications, such as field/marching corps or similar performance
situations.
SNARE DRUM SNARES
SC-SBE
SC-NSC
SNARE DRUM PARTS
Quality chrome-plated coiled steel
wire. Trenched butt plates provide
even tension and contact with head
for improved response.
SC-016A - 10”/16 strand. 1 pk.
9.95
SC-216A - 12”/16 strand. 1 pk.
9.95
SC-1316 - 13”/16 strand. 1 pk.
9.95
SC-360A - 13”/12 strand. 1 pk.
9.95
SC-4459 - 14”/16 strand. 1 pk.
10.95
SC-4467 - 14”/20 strand. 1 pk.
10.95
SC-4467L - 16”/20 strand with
extended length. Fits 14” snare.
1 pk.
10.95
SC-363E - 14”/20 strand (split 10/10).
1 pk.
24.95
SC-4471 - 14”/42 strand.
1 pk.
19.95
SC-4385 - Snare Drum Throw-Off Snare strainer with full throw-off, fine
tuning adjustment with butt end and
screws. 1 pk.
25.95
SC-PTO - Piccolo Throw-Off Throw-off for short drums.
1 pk.
20.95
SC-SC - Snare Cord - Tight weave
nylon cord with double laminated
ends. 6 pk.
4.95
SC-STO - Deluxe Snare Throw-Off Quick-release throw-off mechanism
allows easy adjustment of snare
tension. 1 pk.
30.50
SC-SSC - Metal Snare Cord
4 pk.
6.50
SC-SBE - Deluxe Snare Butt End Butt end assembly with deep channel
and high tension drum key bolts
eliminates snare slippage.
1 pk.
7.95
SC-NSC - Nylon snare strip.
4 pk.
6.95
Bass Drum Parts & Accessories
SC-BPL
SC-4402
SC-BPS
SC-BPF
SC-BS4
SC-BDPM
SC-BF
SC-BS5
SC-DPP
SC-BS2
SC-22M
SC-BDTR/L
SC-BDKR/L
SC-BDKR/S
SC-22BK
SC-BDTR/S
SC-CH
6
WOOD BASS DRUM HOOPS
8-ply, all-maple construction finished
in natural or black lacquer.
Natural Lacquer
SC-18M - 18” Hoop. 1 pk.
82.95
SC-20M - 20” Hoop. 1 pk.
92.95
SC-22M - 22” Hoop. 1 pk.
102.95
SC-24M - 24” Hoop. 1 pk.
112.95
Black Lacquer
SC-18BK - 18” Hoop. 1 pk.
82.95
SC-20BK - 20” Hoop. 1 pk.
92.95
SC-22BK - 22” Hoop. 1 pk.
102.95
SC-24BK - 24” Hoop. 1 pk.
112.95
SC-BPL - Bass Drum Vinyl Beater
Pad - Leather-like vinyl pad mounts
to drum head. 4 pk.
10.50
SC-BPS - Bass Drum Suede Beater
Pad - Suede pad to protect bass drum
head. 4 pk.
9.95
SC-BPF - Felt Impact Pad - Adhesive
felt pad mounts on drum head.
4 pk.
4.50
SC-BDTR/S - Bass Drum T-Handle
Tension Rods - 4-1/4” (108mm) long
x 7/32” dia. 4 pk.
15.95
SC-BF - Bass Drum Felt Strip A 2-1/4” wide felt strip mounts inside
drum head. Fits up to 26” drum.
2 pk.
5.95
SC-BDKR/L - Bass Drum Key Rod 4-3/16” (106mm) long x 6mm dia.
4 pk. (See chart on pg. 4 for
additional info.)
7.50
SC-DPP - Double Pedal Pad - The
same material used on our SC-BPL
for use with double pedals.
2 pk.
5.50
SC-BDKR/S - Bass Drum Key Rod 4-3/16” (106mm) long x 7/32” dia.
4 pk.
7.95
SC-BDPM - Bass Drum Platform
Mount - Fits 18” and 20” bass drums.
It comes with a clamp that attaches
the device to a bass drum’s (batter
side) counter hoop. This helps
prevent movement of any kind.
This mount raises a bass drum
2” off the floor. 1 pk.
39.95
SC-BDTR/L - Bass Drum T-Handle
Tension Rods - 4-1/4” (108mm) long
x 6mm dia. 4 pk.
9.95
SC-CH - Bass Drum Claw Hook4 pk.
13.50
SC-4402 - Bass Drum Anchor Attaches to the bottom of front counter
hoop to prevent bass drum “walking.”
Dual reversible tips. 1 pk.
16.95
SC-BS4 - Bass Drum Spurs Telescopic bass drum spurs.
Angle-adjustable bracket is included.
1 pk.
56.95
SC-BS2 - Lightweight Bass Drum
Spurs - A set of simple and
lightweight spurs. Solid steel rod with
rubber tips mount into cast
receptacles. 1 pk.
35.95
SC-BS5 - Medium Weight Bass
Drum Spurs - Strong yet lightweight
spur set. Perfect for maximum support
without overkill.
1 pk.
61.95
PEDAL PARTS
BASS DRUM PEDAL BEATERS
Hardened steel rods with a flat side
to prevent slipping. Solid felt (1-3/4”
high), lacquered wood dual surface
and plastic beaters.
SC-LBDB - Lightweight Bass Drum
Beater - Dual Surface beater with felt
and plastic option. Extra lightweight for
faster response. 1 pk.
16.95
NEW
Bass Drum Pedal
SC-LBDB
High-Use
Bass Drum Pedal Parts
NEW
SC-DSAB
SC-4071
SC-4007
SC-BSW
SC-DSB
SC-0055
SC-0009
SC-2000
SC-3261
SC-3262
SC-TS
SC-3030L
SC-GLO
SC-15A
SC-3030R
SC-15F
SC-3029
SC-15C
SC-0052
SC-0053
BASS DRUM TENSION RODS
6mm - Fits Pearl (prior to 1995), CB, Mapex, and many
generic Taiwan-made drums.
7/32" - Fits most other manufacturers' drums with the
exception of Sonor and D.W. Fits Pearl bass drums made
after 1995. Fits D.W. bass drums prior to 1996 production.
SC-0062
SC-BDHG
SC-0128
SC-0129
SC-0121
Bass Drum Tension Rod Lengths - All Gibraltar bass
drum T-Rods and key rods are 4-1/4" (108mm) long. They
fit most manufacturers' bass drums, as previously noted,
with the exception of drums which have extended space
between the hoop and lug receptacle. (We recommend
that you measure this space before purchasing.)
SC-2035
Note: At this time, Gibraltar does not manufacture tension rods
which fit Sonor or D.W. drums.
7
SC-DSAB - Dual Surface Adjusting
Beater. 1 pk.
26.95
SC-15C - Generic Spring.
2 pk.
SC-DSB - Dual Surface
Beater. 1 pk.
24.95
SC-3261 - Solid White Felt.
1 pk.
24.95
SC-GLO - Gibraltar Pedal Lubricant Perfect for use on hi-hat and bass drum
pedals to protect bearings and eliminate
squeaks. 1 oz. bottle
3.50
SC-3262 - Solid Wood Ball.
1 pk.
11.50
SC-BSW - Bass Drum Beater Shaft
Weight - Fits most bass drum beaters.
2 pk.
14.95
SC-TS - Bass Pedal Toe Stop - Fits all
Gibraltar and many manufacturers’
pedal boards. 2 pk.
11.95
Drum Pedal Parts - Heavy-duty
replacement springs/straps for most
popular style pedals.
SC-15F - Universal Spring.
2 pk.
12.95
SC-15A - Universal Pedal Strap.
4 pk.
14.95
4.95
SC-3030L - Left Square Connecting
Shaft w/U-Joint. Assembly comes
with 2 SC-0129 6mm Key Screws.
1 pk.
36.95
SC-0062 - Heel Plate Screw Kit.
2 pk.
3.95
SC-0053 - Pedal Spring Tension
Assembly. 2 pk.
5.95
SC-3029 - Center Connecting Shaft
Housing. 1 pk.
10.95
SC-0052 - Pedal Spring
Assembly. 2 pk.
SC-BDHG - Bass Drum Hoop
Guard - Protects lacquer bass drum
hoops from bass pedal hoop clamp.
2 pk.
5.95
SC-0009 - 8mm Wing Screw.
5 pk.
HIGH-USE PEDAL PARTS
SC-0128 - 5mm Key Screw for
U-Joint. 4 pk. (Not shown)
4.95
SC-4071 - Prowler Chain w/Master
Link. 1 pk.
15.95
SC-0129 - 6mm Key Screw for
SC-3030 R and L Connecting
Shaft. 4 pk.
4.95
SC-4007 - Avenger II, Intruder II
Chain Assembly. 1 pk.
20.95
SC-0121 - 8mm Key Screw for
Beater Hub. 4 pk.
3.95
SC-3030R - Right Square Connecting
Shaft w/U-Joint. Assembly comes
with 2 SC-0129 6mm Key Screws.
1 pk.
36.95
SC-2035 - Rock Plate Screw Kit.
1 pk.
3.95
SC-2000 - Die Cast Pedal Hinge
w/Screws. 1 pk.
7.95
5.50
SC-0055 - Hoop Clamping Tension
Screw. 2 pk.
4.95
5.95
Tom Tom Mounting Systems
L-ROD Style Mounting Systems
L-RODS
L-ROD PLATFORM WITH POST
L-ROD PLATFORMS
WITH CLAMP
SC-SPC
L-ROD BALLS
SC-LBS
9.5mm
SC-LBM
10.5mm
SC-LBL
12.7mm
SC-SP
L-RODS
SC-LR
9.5mm
SC-LRM
10.5mm
SC-DP
10”
SC-LRL
12.7mm
16”
SC-DPC
Use with L-rod balls.
SUPER L-RODS
SC-SLR
10.5mm
1”
SC-DWLR
12.7mm
1”
Use with L-rod balls
SC-SLRM/
SC-SLLRM
SC-1BDB
L-ROD BALL/ARMS
SC-BALRM
10.5mm
SC-BALRL
12.7mm
SC-LDML
L-ROD TOM MOUNTS
FLOOR
TOM LEGS
SC-STL4
SC-TL2
SC-TL1A - 9.5mm Legs
SC-STL3
Use with L-rod tom mounts.
SC-STL2
SC-TL2A - 10.5mm Legs
8
L-ROD TOM TOM MOUNTING
SYSTEMS - Choose from several
designs to fit your specific setup.
9.5mm, 10.5mm and 12.7mm
L-Rods work with our SC-TL2,
SC-STL2 and SC-STL3 tom mounts
and many manufacturers’ mounts. (See
chart on the next page.)
L-Rod Balls - These L-rods fit various
manufacturer’s tom mounting systems
(see “Tom Mounting Systems Glossary”
page 9). They can be mounted in any
of the L-rod platforms with post or with
clamp and in many manufacturers’
original tom mounting systems.
SC-LBS - Ball with 9.5mm rod.
1 pk.
10.95
SC-LBM - Ball with 10.5mm rod.
1 pk.
10.95
SC-LBL - Ball with 12.7mm rod.
1 pk.
10.95
SC-LR - Small L-Rod - Tom/cowbell
attachment arms fit directly in multi-
clamp. 12mm x 9.5mm dia.
(Fits SC-STL2 and SC-TL2 mounts.)
2 pk.
11.95
SC-LRM - Medium Knurled L-Rod 12mm x 10.5mm dia. (Fits SC-STL2
and SC-STL3 mounts.) 2 pk.
12.95
SC-LRL - Large Knurled L-Rod 12mm x 12.7mm dia. 2 pk.
13.95
SC-SLR - Super Knurled L-Rod 26mm to 10.5mm. Fits directly in a
multi-clamp. Extra large dia. for
strength and stability. For use with
our SC-STL3 heavy-duty tom bracket.
1 pk.
15.95
SC-DWLR - 26.5mm to 12.7mm
L-Rod - This super L-Rod fits D.W.,
Gibraltar and some other manufacturers’ L-Rod tom tom brackets.
1 pk.
17.95
SC-BALRM - Ball Arm L-Rod Mount
(Medium) - All-in-one, ready-to-go
10.5mm L-rod with ABS base with
adjustable angle ball, mounted on 7/8”
dia. vertical post. 1 pk.
40.95
SC-BALRL - Ball Arm L-Rod Mount
(Large) - Similar to the SC-BALRM
except L-rod is 12.7mm dia.
1 pk.
40.95
L-Rod Platforms - Designed to be
used with any L-rod ball mount.
Gibraltar’s L-rod platforms allow tom
mounting via bass drums and or all
types of stands and rack systems.
SC-SP - Single L-Rod Platform Single L-rod platform with 1” dia.
vertical post (for single tom mounting).
1 pk.
39.95
SC-DP - Double L-Rod Platform Double L-rod platform with 1” dia.
vertical post (for double tom mounting).
1 pk.
58.95
SC-1BDB - 1” Diameter Tom Tom
Bass Drum Bracket -The SC-1BDB
mounts on bass drum and accepts 1”
dia. tubes. Works with Gibraltar tom
mounting posts and other manufacturers’ mounting posts with 1” dia. shaft.
Memory lock
included. 1 pk.
35.95
SC-SLRM - Single L-Rod Tom
Mount - Designed to easily mount
a single tom, percussion instrument
or trigger device from an existing stand.
L-Rod with ball adjustment gives
incredible adjustability. L-Rod
is 10.5mm in diameter. Holds up to
a 14” x 14” tom. 1 pk.
42.50
SC-SLLRM - Super Large L-Rod
NEW
Mount- (Not Pictured) - Same as
SC-SLRM, but with 12.7mm L-rod ball.
1 pk.
42.50
SC-LDML - L-Rod Tom Memory LockFits knurled L-Rods from 9.5mm to
12.7mm in dia. Made to work with
SC-STL2 & STL3 mounts, but will work
with other manufacturers’ L-Rod
mounting systems. 1 pk.
7.95
SC-STL2 - Heavy-Duty Tom Bracket
with Memory Lock - Accepts 9.5mm to
12.7mm L-Rods. Perfect for use with
R.I.M.S.™ and Gibraltar TSS mounting
systems. Similar to SC-STL3 but with
two drum key bolts. 1 pk.
33.95
Hex Style System
7/8” Dia. Style Mounting Systems
PLATFORM MOUNTABLE 7/8”
TOM TOM ARMS
BASS DRUM MOUNTABLE
7/8” TOM TOM ARM
700HA
HEX ROD MOUNTS
7/8” TOM TOM MOUNTS
SC-BAHR
SC-670TB
SC-BA78EL
6”
6”
SC-670BB
6”
SC-750TB
10”
SC-BA78
13.8”
TOM MOUNTING SYSTEMS GLOSSARY
7/8" Diameter Mounts - Fits most Pearl, CB, Mapex, and other generic
Taiwan-made drums.
10”
Hex Rod Mounts - Fits some Yamaha drums and Yamaha electronic pads.
L-Rod Mounts - Fits some D.W., GMS, Gretsch, Legend, Premier, Noble &
Cooley, Ludwig, and Tama models (check L-Rod diameter prior to purchase.)
L-ROD DIAMETERS
9.5mm - Fits most cowbells, percussion mounts, floor tom brackets, old Ludwig
models, and Gibraltar SC-STL2 and SC-STL3 tom brackets.
SC-78UA
10.5mm - Fits most contemporary L-Rod mounts for Legend, GMS, Noble
& Cooley, Premier, Ludwig, and Tama. Fits SC-STL2 and SC-STL3 brackets and
some Yamaha electronic trigger pads.
6”
12.7mm - Fits D.W. and Gretsch brackets and Gibraltar SC-STL2 and SC-STL3
brackets.
SC-PM
10”
GIBRALTAR
“ULTRA
ADJUST”
SYSTEM
TOM BRACKET
Gibraltar tom brackets are designed to fit primarily on Gibraltar GTTS™
mounting systems (on metal plate). If you plan to mount tom brackets directly on
a drum shell, you may need longer mounting screws, depending on the
thickness of your shell.
BASS DRUM BRACKET/RECEPTACLES
These are designed to be mounted on a bass drum shell and come with extended length mounting screws, washers, and fasteners to accommodate most drum
shell thicknesses.
16”
TOM ARMS
No other drum company offers as many options for mounting a tom tom as
Gibraltar. We suggest you consider the following points before purchasing a
Gibraltar tom arm:
• Size and weight of drum to be mounted.
• Positioning requirements (fixed or moveable).
• Attachment point of tom arm (from stand, directly from rack, from
bass drum, etc.).
• Cost of all parts needed to complete mounting system (example:
cymbal stand, multi-clamp, tom arm, tom bracket). Choose the most cost
effective, physically-secure system.
SC-4429
1”
SC-STL3 - Super Tom Mount with
Wing Screw and Memory Lock Similar to the SC-STL2, this L-rod tom
mount is tightened via a large wing
screw. It also comes with a memory
lock which fits on L-rods. Fits 9.5mm to
12.7mm L-rods. 1 pk.
33.95
SC-STL4 - L-Rod Tom Mount Chrome L-Rod tom mount is heavy duty
yet small in size and lightweight. Fits
9.5mm to 12.7mm L-rods.
1 pk.
34.95
SC-TL2 - Tom/Floor Tom Bracket Drum mount bracket to fit 9.5mm or
10.5mm tom arms or floor tom legs.
Wing screw/eye bolt adjustments.
1 pk.
14.50
SC-SPC - Single L-Rod Platform with
Clamp - Single L-rod platform with
adjustable multi clamp. (Multi-clamp fits
up to 1” dia. post.) 1 pk.
36.95
SC-DPC - Double L-Rod Platform
with Clamp - Double L-rod platform
with adjustable multi clamp. (Multiclamp fits up to 1” dia. post.)1 pk. 50.95
SC-TL1A - 9.5mm Floor Tom Legs 21” angled legs (without bracket).
Set of 3 (9.5mm)
20.95
SC-4429 - Stabilizer Platform Three-way clamp accepts 1/2” through
1” dia. tubes. 1 pk.
35.95
SC-TL2A - Floor Tom Legs - 21”
angled legs (without bracket).Chromeplated. Set of 3 (10.5mm)
22.95
SC-78UA - 7/8” Diameter Tom Arm
with Ultra Adjust - Gibraltar’s
exclusive “Ultra Adjust” system adds
additional flexibility to a standard 7/8”
dia. tom arm. Recommended for use
with various manufacturers’ rack
systems. 1 pk.
55.95
7/8” DIAMETER TOM TOM
MOUNTS - Use 7/8” dia. pipe-style
arms. Both bass and tom brackets
accept 7/8” pipe receptacles.
SC-700HA - Tom Arm - Double 7/8”
dia. arms joined by a multi-angle
ratchet adjustment. 1 pk.
27.95
SC-BA78 - Ball Arm 7/8” dia. Tom
Arm - All-in-one, ready-to-go 7/8”
dia. tom arm with ABS base with
adjustable angle mounted on a 1/2”
dia. vertical post. Recommended for
use with various manufacturers’ rack
systems. 1 pk.
40.95
SC-BA78EL - Ball Arm 7/8” dia.
Tom Arm with Extended Height
Capabilities - Same mount as
SC-BA78 with longer vertical arm.
Recommended for use when mounting
in SC-670BB or original manufacturers’
bass drum mount. 1 pk.
46.95
SC-PM - Platform Mount - Perfect
match for cymbal boom arms. Mounts
two or more items from racks or stands.
1 pk.
37.95
SC-670TB - Tom Bracket - Single 7/8”
dia. receptacle. 1 pk.
20.95
SC-670BB - Bass Bracket - Double
7/8” dia. receptacle. 1 pk.
37.95
HEX ROD TYPE TOM TOM
MOUNTS
SC-BAHR - Ball Arm with Hex Rod All-in-one, ready-to-go hex rod
tom arm with ABS ball with adjustable
angle mounted on a 7/8” dia. vertical
post. Recommended for use with
various manufacturers’ rack systems
or original manufacturers’ tom platform
mounts. 1 pk.
39.95
SC-750TB - Tom Bracket - Single
hexagonal rod receptacle. 1 pk. 15.95
9
Gibraltar
Tom Suspension
System
Cymbal Arms &
Mounting Systems
SC-4425A-1
NEW
SC-MB
17.3”
17.3”
MS-TC
Shown in photo:
SC-GTS 12/6
Tom mount not included
3/4”
SC-EA100
SC-PM
NEW
Fits 3/4” dia.
cymbal arm
NEW
SC-XHAT
13”
SC-BJEA
Shown in photo:
SC-GTS8/4
MS-XLR
SC-GCA
1”
10
GIBRALTAR TOM SUSPENSION SYSTEM
The GTSS is a proven mounting system for tom toms from 8” to 16” in diameter.
This system can also be used to mount snare drums. While the GTSS is new to the
Gibraltar accessory line, its design has been around for 20 years. The GTSS not
only is an excellent mounting system, it actually improves the sound of a drum.
Available models and sizes:
Part No.
SC-GTS 8/4
SC-GTS 8/5
SC-GTS 10/5
SC-GTS 10/6
SC-GTS 12/5
SC-GTS 12/6
SC-GTS 13/6
SC-GTS 14/6
SC-GTS 14/8
SC-GTS 16/6
SC-GTS 16/8
Description
8” / 4 Lug
8” / 5 Lug
10” / 5 Lug
10” / 6 Lug
12” / 5 Lug
12” / 6 Lug
13” / 6 Lug
14” / 6 Lug
14” / 8 Lug
16” / 6 Lug
16” / 8 Lug
Retail
$42.95
$42.95
$44.95
$46.95
$48.95
$49.95
$52.95
$54.95
$58.95
$62.95
$64.95
Note: GTSS is not available for 15” diameter drums.
Availability may vary from country to country
SC-MB - Mini Boom (Hideaway
Boom) - This small boom doubles
as a straight cymbal arm or a cymbal
boom arm. 3/4” dia. vertical shaft.
1 pk.
49.95
SC-4425A-1 - Straight Cymbal Arm 3/4” dia. shaft by 17.3” (long).
1 pk.
36.95
SC-BJEA - Ball Joint Extension
Arm - Allows cymbal arm to be
mounted in ball arm socket. Can
be used on Gibraltar or other manuffacturers’ L-rod platform mounts.
1 pk.
27.95
SC-XHAT - Mini X-Hat Attachment
NEW -Mounts on any cymbal tilter to allow
mounting of extra hi-hats.
1 pk.
39.95
SC-GCA - Grabber Cymbal Arm Straight cymbal arm mounted to a
geared ratchet adjustment and
attached to a basic grabber clamp
(SC-BGC). 1 pk.
45.95
SC-EA100 - Extension Arm Universal extension arm with 360˚
ratchet plus a multi-clamp attachment.
Allows infinite positioning for almost
any piece of drum hardware.
(1” dia. tube) 1 pk.
40.95
SC-PM - Platform Mount - Perfect
match for the SC-4425MB. Mounts
two or more items from one rack or
stand multi-clamp. 1 pk.
37.95
MS-TC - Tri-Cymbal Mounting
System - Mounts three cymbals in
any way imaginable. Includes (2)
NEW
SC-CLRA Cymbal L-rod Attachments
(see page 12), (1) SC-TPBA Two-Point
Boom Attachment and (1) SC-LBRA
Long Boom Ratchet Assembly (See
page 11). 1pk.
119.50
MS-XLR - X-Hat/L-rod Mounting
System - Combines the mounting of a
9707X auxiliary hat with an additional
SC-PLRA Percussion L-rod
NEW
Attachment (See page 12).
1pk.
115.50
D
OVE
IMPR
SC-CBS
SC-SBS
SC-4425B-1
Gibraltar’s exclusive 360˚
cymbal tilter mechanism for
infinite positioning.
17.3”
13.8”
13.8”
7/8”
SC-RMH
NEW
SC-LBRA
3/4”
7/8”
SC-SBRA
SC-4425MB
SC-TPBA
NEW
Memory Locks
SC-BCSA
SC-ML34
SC-ML78
10”
SC-CSA
SC-ML1
7/8”
11
SC-4425B-1 - Cymbal Boom Arm - 7/8”
dia. post with a cymbal boom arm that is
unweighted, knurled and fully adjustable.
1 pk.
49.95
SC-CBS - Cymbal Boom Smooth The same boom assembly as the
SC-4425B-1 with smooth boom arm.
Makes quick position adjustments
easier. 1 pk.
44.95
SC-RMH - Replacement Microphone
Holder - Left cast assembly for cymbal arms. Converts cymbal tilter to
microphone holder. Comes with two
thread sizes to fit most manufacturers’
mic clips (holders). SC-RMH fits on
Gibraltar SC-4425B-1, 4425MB, GCA,
CBS, 4425A-1, and MB cymbal arms.
1 pk.
14.95
SC-CSA - Cymbal Stacking
Attachment - Allows two cymbals
(of any size) to be placed on top of
each other with approximately 8” of
clearance between them. Mounts
on most 6mm and 8mm cymbal stand
tops. (No special screws or mounting
pieces required.) 1 pk.
35.95
SC-4425MB - Mini Cymbal Boom
Arm - Perfect for mounting splash,
small effect cymbals or bar chimes.
10” vert. shaft with 14” horiz. shaft
long enough to position small cymbals
but short enough to stay out of the
way. Smooth cymbal arm. 7/8” dia.
shaft. 1 pk.
39.95
SC-BCSA - Boom Cymbal Stacking
Attachment - Fits any manufacturer’s
cymbal tilter. Fully Adjustable.
1 pk.
65.50
SC-SBS - Super Boom Small - 20”
unweighted boom with 360˚ cymbal
tilter. 3/4” dia. vertical shaft. The
Gibraltar super boom gets a thicker
tube wall for additional strength when
being clamped.
1 pk.
63.50
NEW
SC-SBRA - Short Boom Ratchet
NEW Arm - Knurled 12.7mm ratchet arm
mounts on any cymbal boom
assembly. 1 pk.
19.50
SC-LBRA - Long Boom Ratchet
Arm - Knurled 12.7mm ratchet arm
NEW
mounts on any cymbal boom
assembly. 1 pk.
21.50
SC-TPBA -Two-Point Boom - 3/4"
NEW
dia. Vertical shaft. 17.3" long. Fits
most cymbal stands and multi clamps
1 pk.
29.50
MEMORY LOCKS
SC-ML34 - 3/4” dia. 4 pk.
19.95
SC-ML78 - 7/8” dia. 4 pk.
19.95
SC-ML1 - 1” dia. 4 pk.
19.95
Multi-Clamps &
Spanner Parts
NEW
SC-BGC
SC-SSMC
SC-4425G
NEW
SC-LRAC
SC-CLRA
SC-SUGC
SC-PLRA
GPR-SSS
SC-UGC
SC-PUGC
SC-4429
SC-UGC
12
EW SC-PLRA - Percussion L-rod
N
SC-4425G - Standard Grabber
Clamp - Double clamp assembly.
Accepts 1/2” through 1” dia.
1 pk.
28.50
GPR-SSS - Super Spanner System 46” curved bar connects to your
existing cymbal stands via two
EW
SC-GRSSMC super multi-clamps. N
Total clamps included are:
(4) SC-GRSSMC,
(2) SC-GRSMC.
1 pk.
214.95
Attachment - Grabber multi-clamp
with two L-rod adjustments can mount
on any cymbal arm or L-rod. Fully
Adjustable 9.5mm to 10.5mm eye
bolts. 1 pk.
35.95
SC-LRAC - L-rod Adjustment Clamp
Grabber multi-clamp with L-rod that
allows mounting of bells, blocks and
other accessories to a set up. Fully
Adjustable. 1 pk.
34.95
SC-CLRA - Cymbal L-rod
W Attachment - Grabber multi-clamp
NE
SC-PUGC - Pearl-Type Grabber
Clamp - Angled center post with a
rotating clamp at each end.
1 pk.
38.50
SC-BGC - Basic Grabber Clamp Economical version of SC-4425G
without hinged clamps.
1 pk.
24.95
with two L-rod adjustments can mount
on any cymbal arm or L-rod. Fully
Adjustable 9.5mm to 10.5mm eye
bolts. 1 pk
35.95
SC-UGC - Universal Grabber
Clamp - Double clamp accepts 5/8”
through 1-1/4” dia. arms.
1 pk.
47.95
SC-4429 - Stabilizer Platform Three-way clamp accepts 1/2” through
1” pipe dia.
1 pk.
34.95
SC-SSMC - Super Spanner
Multi-Clamp NEW
Double quick-release clamp that
secures spanner bars and accessories
at a right angle to each other. Each
side of the multi-clamp accepts from
5/8” to 1-1/4” dia. tubes.
1 pk.
44.50
SC-SUGC - Super Universal
Grabber Clamp - Features double
multi-clamps which accept 5/8”
through 1-1/2” dia. arms and rack
tubes. The multi-clamp gripping
surface has been made 2-1/2 times
larger (same multi-section as the
SC-GRSSMC).
1 pk.
55.95
WING NUTS/CYMBAL SLEEVE
SC-13G - Small (6mm). 5 pk.
SC-13E - Medium (8mm). 5 pk.
SC-13P - Large (8mm). 5 pk.
6.95
6.95
8.95
Cymbal Sleeves - Sleeves fit over
threaded portion of cymbal mount to
protect cymbals. Several styles:
SC-PC698 - Straight (6mm).
12 pk.
3.95
SC-8CS - Straight (8mm).
12 pk.
4.50
SC-19A - Flanged base (8mm) for
Gibraltar 9500 Cymbal tilters (longer
shaft) 4 pk.
5.50
SC-19B - Flanged base (8mm).
4 pk.
5.50
Cymbal Stand Parts
& Rubber Feet
SC-19A
Hi-Hat
Parts & Accessories
SC-CFL-4
SC-CLF-4
SC-19B
SC-DC
SC-CFS-4
SC-4420
SC-13P
SC-4421
SC-MCW
SC-8CS
SC-13E
SC-13G
SC-4421D
SC-PC698
NEW
SC-TCWN/6
SC-4980J
SC-CT
SC-HF-4
SC-4420S
SC-TCWN
SC-RMH
SC-1655-4
SC-PC07
SC-PC09
SC-PC08
SC-RP171
SC-PC13
13
SC-TCWN/6 - 6mm T-Style ABS
Cymbal Wing Nut - Same design as
the SC-TCWN. Fits in place of 6mm
cymbal wing screw. 4 pk.
3.95
SC-TCWN - 8mm T-Style Wing
Nut - ABS wing screw and cymbal
shaft protector all in one. 4 pk. 3.95
CYMBAL FELTS
SC-CFS-4 - Small 3/4” thick.
4 pk.
SC-CFL-4 - Large 1-1/2” thick.
4 pk.
2.95
3.50
SC-MCW - Metal Cymbal Washers Used on cymbal tilters. Fits 8mm.
4 pk.
4.50
NEWSC-CT - Auxiliary Cymbal Tilter Full cymbal tilter assembly fits on most
cymbal ratchet arms for additional
cymbal mounting. 8mm tilter. 1/4” tension rod head can be used to tighten
once set at desired position.
1 pk.
23.95
SC-RMH - Replacement Microphone
Holder - Left cast assembly for
cymbal arms. Converts cymbal tilter
to microphone holder. Comes with
two thread sizes to fit most manufacturers’ mic clips (holders). SC-RMH
fits on Gibraltar SC-4425B-1, 4425MB,
GCA, CBS, 4425A-1, and MB cymbal
arms. 1 pk.
14.50
RUBBER FEET
SC-PC07 - Fits all 9000 Series
Gibraltar stands.
3 pk.
6.50
SC-PC08 - Rubber Feet for Elliptical
Legs - Fits all 7000 Series Gibraltar
stands. 3 pk.
8.95
SC-PC09 - Round Gibraltar Rubber
feet - Fits 9500 Gibraltar stands and
other manufacturers’ double braced
stands.
3 pk.
9.50
SC-PC13 - Fits CB 3000 and various
entry level stands.
3 pk.
4.95
SC-DC - Hi-Hat Drop Clutch Disengage and drop top cymbal by
hitting clutch with drumstick. Step on
the pedal and clutch attaches itself at
original position. (8mm rods)
1 pk.
23.95
HI-HAT CLUTCHES
SC-4980J - Hi-Hat Cymbal Seat Fits Gibraltar and most professional hihat stands w/1” or 5/8” tube.
1 pk.
7.50
SC-CLF-4 - Clutch Felts. 4 pk. 2.95
SC-HF-4 - Cup Felts. 4 pk.
SC-4421 - Universal - Fits CB
Percussion 3207 and most inexpensive stands. (6mm rods) 1 pk. 12.50
SC-1655-4 - Cup Washer. 4 pk. 5.95
SC-4421D - Standard - Fits Rock
Hardware by Gibraltar and most
moderately priced stands.
(8mm rods) 1 pk.
11.95
SC-4420 - Professional Fits Gibraltar and most
professional stands. (8mm rods)
1 pk.
14.95
3.95
SC-4420S - Super Clutch - Utilizes
our “Super Grip” clamping mechanism
which will not scar the hi-hat pull rod.
Fits 8mm rod. 1 pk.
16.95
SC-RP171 - Hi-Hat Attachment
Clamp - Attaches to bass drum
counter hoop to support the hi-hat
when used with a double bass
setup. 1 pk.
33.95
Hand Percussion Mounting Systems
SC-BST
SC-SM
6”
10
”
SC-BM
13.8”
SC-BDCM
SC-GM
1”
The SC-BST comes with
bolt kit to fit most makes
of professional bongos.
SC-CLW
SC-CBPM
SC-DJM
14
SC-BM - Block Mount Allows for mounting of various wood
blocks. Mount expands from 6” to 10”
to fit different size blocks. 1 pk. 49.95
SC-SM - Shakere Mount Allows for mounting of most Shakeres.
Shakeres can be played while
mounted. 1 pk.
45.95
SC-GM - Guiro Mount - Allows for
mounting of most Toca and other
Guiros via an adjustable mounting
system. Guiro can be played while
mounted. 1 pk.
37.95
SC-DJM - Djembe Mounting Kit for
Double Conga Stand - Fits Gibraltar
and most other manufacturers’ double
conga stands. Allows mounting of
Djembe drum on double conga stand.
1 pk.
29.95
SC-CBPM - Cowbell Bass Pedal
Mount - Allows mounting of most
brands of cowbells, blocks or
tambourines to an adjustable floor
stand, which also accepts most
brands of bass pedals.
1 pk.
55.95
SC-BST - Bongo Stand Top - The top
section of 9516 Deluxe Bongo Stand.
Allows sturdy mounting of
bongos to rack systems or double
conga stands. Fits 1/2” to 1-1/2” dia.
bars.
1 pk.
50.50
SC-BDCM - Bongo Dbl. Conga
Stand Mount - Attaches to any dbl.
conga stand to allow secure mounting
of bongos w/the same top as the
Gibraltar 7516 bongo stand.
1 pk.
105.50
SC-CLW - Conga Lug Wrench Heavy-duty ratchet assembly with a
1/2” socket which fits most manufacturers’ congas and bongos for easy,
accurate tuning.
1 pk.
17.95
SC-SAT
SC-MAT
SC-AM4
9.5mm
SC-101
SC-AM1
NEW
SC-4425D-1
9.5mm
GAB-20
SC-TLR
GAB-12
SC-TC
SC-DTM
SC-EB
SC-4795
15
SC-101 - Tambourine Holder Attaches to 9.5mm or 10.5mm rod
to mount most tambourines.
1 pk.
16.50
SC-MAT - Medium Accs. Table With
Mount - Attaches to a cymbal stand
or rack bar. 12” x 18”, with 1” high
borders and padded surface.
90.50
SC-SAT - Small Accs. Table With
Mount - Attaches to a cymbal stand
or rack bar. 12” x 12”, with 1” high
borders and padded surface.
80.50
SC-TC - Heavy-Duty Triangle Clip Clothespin-style clamp for attaching
triangle. Vinyl coated tip for a secure
grip. 1 pk.
10.50
SC-TLR - Triangle L-rod - 9.5mm to
NEW 10.5mm L-rod with pre-installed nylon
cord can be mounted on most multi
clamps to allow better mounting of triangles. 1 pk.
9.50
SC-4425D-1 - Cowbell/Tom Arm 7/8” dia. post topped with an L-Rod for
mounting cowbells and other accessories. L-Rod also fits some tom
mounts and electronic drums. 5/16”
(9.5mm) dia. L-Rod accepts most
cowbells, blocks, tambourines, etc.
1 pk.
33.95
SC-DTM - Double Mini Timbale
Mount - Fits 6”, 8” or 10” Toca mini
timbales and holds two cowbells,
woodblocks, etc. Clamps onto existing
stand via rack style cast multi-clamp
fitting. Fits 1/2” to 1-1/4” dia. stands.
1 pk.
64.50
SC-AM4 - Four-Post Mount We’ve added a cast multi-clamping
fixture to this popular mounting device,
which guarantees secure and even
mounting to cymbal stands and other
fixed vertical tubes. Holds up to eight
accessories top or bottom. Use with
other accessory holders (SC-CA,
SC-WCA, etc.) to expand mounting
possibilities. 1 pk.
60.95
SC-AM1 - Single Post Mount Attaches to stand to provide top or
bottom mounting. Use with other
accessory holders to expand mounting
possibilities. 1 pk.
25.95
SC-EB - Eye Bolt Kit - Wing nut,
washer and bolt set fits 9.5mm to
10.5mm shafts. 2 pk.
7.95
SC-4795 - Cowbell U-Clamp Standard “U” style clamp with wing
screw to fit post on cowbell holder.
2 pk. (Fits 9.5mm shaft.)
6.95
The GAB-12 and GAB-20 mounting
platforms utilize a cast multi-clamp
fixture to guarantee secure and even
mounting to cymbal stands and other
fixed vertical tubes.
GAB-12 - 12” long, holds 6 items.
1 pk.
40.50
GAB-20 - 20” long, holds 10 items.
1 pk.
45.50
Hand Percussion Mounting Systems
SC-WCA
SC-CA
NEW
SC-LRAC
SC-WCM
SC-ABM
9.5mm
SC-170
SC-BDHC
SC-RP269
SC-WCC
13.8”
NEW
MS-SP
16
SC-WCM - Wind Chime Mount Our SC-AM1 & SC-WCA are matched
up to make the ultimate wind chime
mount. Multi clamp section fits 1/2”
to 1-1/2” dia. Wind chime arm is held
via eye bolt mechanism.
1 pk.
39.95
SC-ABM - Agogo Bell Mount Fits on 9.5mm or 10.5mm knurled
post. Accomodates most manufacturers’ mountable agogo bells.
1 pk.
17.50
MS-SP - Splash/Percussion
NEW Mounting System -
Mounts two percussion accessories
and one small cymbal in any way
imaginable. Includes two SC-PLRA
Percussion L-rod Attachments (see
page 12), (1) SC-TPBA Two-Point
Boom Arm and (1) SC-SBRA Short
Boom Arm. (See page 11).
1 pk.
119.50
SC-WCA - Chime Arm For
Accessory Mount - Attaches to
SC-AM one or four accessory mounts
for adding wind chimes.
1 pk.
9.95
SC-CA - Cymbal Arm for Accessory
Mount - Attaches to SC-AM one or
four accessory mounts for adding
accent cymbals.
1 pk.
10.95
SC-170 - Boom Cowbell/Tom Arm Boom arm topped with a 5/16”
(9.5mm) dia. L-Rod for mounting
cowbells and accessories.
1 pk.
59.50
SC-BDHC - Bass Drum Hoop
Clamp - Heavy-duty percussion
mount which clamps on a bass drum
counter hoop. Provides 9.5mm
knurled post for mounting bells,
blocks, and other percussion
instruments.
1 pk.
38.95
SC-WCC - Wood Block/Cowbell
Holder for Accessory Mount Attaches to SC-AM accessory mounts
for adding wood blocks and cowbells.
1 pk.
14.50
SC-LRAC - L-rod Adjustment Clamp
Grabber multi-clamp with L-rod that
allows mounting of bells, blocks and
other accessories to a set up. Fully
Adjustable. 1 pk.
34.95
NEW
SC-RP269 - Bass Drum Double
Percussion Mount - Lightweight, dual
purpose percussion mount clamps on
a bass drum counter hoop. Provides
9.5mm knurled post for mounting bells
and other percussion instruments and
two mini L-rods for traditional wood
block mounting.
1 pk.
16.50
Hand Drum Parts
& Accessories
SC-CPM
TP-HAND
TP-TRC
TP-SM
TP-TRB
SC-CM
SC-268R
TP-TW
TP-RT
TP-NB (TP-NC)
17
SC-CPM - Cymbal Post Mount Cymbal holder with heavy-duty tilter
assembly and 8mm wing screw.
Mounts on 9.5mm shaft. Fits on
SC-4425D-1, 170, GAB-20, DTM,
AM-1, AM-4 and BDHC.
1 pk.
40.50
SC-CM - Cabasa Mount - Allows
a hand-held cabasa to be placed
in a padded holder for easy access.
Cabasa can also be played while being
held in mount. Fits on 1/2”
to 1-1/2” dia. tubes.
1 pk.
25.95
SC-268R - Bass Drum Cowbell
Mount - Mounts on bass drum
counter hoop. 5/16” (9.5mm)
post with “U” clamp and wing
screw.
1 pk.
12.95
HI-USE HAND DRUM PARTS
TP-HAND - Conga Handle In Chrome
with mounting hardware.
1 pk.
14.50
TP-TRC - Conga Tension Rod
with nut and washer.
1 pk.
5.00
TP-SM - Conga Stand Mount
with mounting hardware.
2 pk.
13.95
TP-TRB - Bongo Tension Rod
with nut and washer.
1 pk.
5.99
TP-RT - Conga/Bongo Tension Rod
Rubber Tip.
6 pk.
3.95
TP-NC - Conga Tension Rod Nut
with washer.
6 pk.
5.50
TP-NB - Bongo Tension Rod Nut
with washer.
4 pk.
4.50
TP-TW - Tuning Wrench
with Lug Grease In Pouch.
1 pk.
6.50
Note: TP stands for Toca Parts. These
generic parts by Toca will fit most major
manufacturers’ Congas, Bongos and
other hand drums.
Gibraltar Power Rack Parts & Accessories
SC-GPRML
SC-GPRTC
SC-RBA
SC-GPRMC
SC-GPRTL
SC-GPRAC
SC-GPREC
RACK TUBES
SC-GPREX
SC-GPR40C
SC-GPRARA
SC-GPR43.5
SC-GPRRA
18
POWER RACK SERIES
SC-GPRTC - T-Clamp - Connects
vertical tubing at a 90˚ angle.
1 pk.
29.95
SC-GPRAC - Rack Angle Clamp Connects rack tube to an angled
hinge. High-impact plastic.
1 pk.
18.95
SC-GPREX - Power Rack Extension
Clamp - Connects two 1-1/2” dia. rack
tubes end to end.
1 pk.
21.95
SC-GPRRA - Right Angle Clamp Fixed 90˚ right angle clamp with
hinged sides.
1 pk.
30.95
SC-GPRMC - Power Rack MultiClamp - Universal clamp mounts
to rack. Holds 5/8” to 1-1/4” dia.
accessory arms.
1 pk.
30.95
SC-GPRTL - T-Leg Clamp - Specially
modified SC-GPRTC designed for use
with T-leg assemblies.
1 pk.
29.95
SC-GPRARA - Adjustable Right
Angle - This all-new clamp allows
for many setup capabilities. Use for
unique setups or for a quick teardown
and fold up of important rack sections
1 pk.
36.95
RACK TUBES
1-1/2” dia. chrome steel tubes with
plastic end caps.
SC-GPR20 - 20” Tube. 1 pk.
19.95
SC-GPR30 - 30” Tube. 1 pk.
21.95
SC-GPR36 - 36” Tube. 1 pk.
24.95
SC-GPR43.5 - 43.5” Tube. 1 pk. 26.95
SC-GPR59 - 59” Tube. 1 pk.
45.95
SC-GPRML - Power Rack Memory
Lock - 1-1/2” dia. ensures same
clamp position on rack. All metal
construction.
2 pk.
12.95
SC-GPR68 - 68” Tube. 1 pk.
63.95
SC-GPREC - Power Rack Electronic
Clamps - Flat arm assemblies with
1-1/2” dia. rack clamps.
2 pk.
64.95
SC-GPR46C - 46” Curved Tube.
1 pk.
52.95
SC-GPR24C - 24” Curved Tube.
1 pk.
29.95
SC-GPR40C - 40” Curved Tube.
1 pk.
44.95
We’ve redesigned the SC-RBA to
accept 1/2”, 3/4” or 7/8” dia. tubes.
This allows the mounting of almost
all manufacturers’ cymbal boom arms
and other mounting devices. Fits
over any 1-1/2” dia. rack tube.
SC-RBA - Cymbal Boom
Attachment - Fits over any 1-1/2”
dia. rack tube and allows mounting
of most popular cymbal boom arms.
1 pk.
26.95
Gibraltar Road Series Parts & Accessories
RACK FEET
SC-GRSSMC
SC-GRSAAC
SC-GRSRA
SC-GRSMC
SC-GRSSRA
SC-GRSAR
SC-RC
SC-RF/R
SC-GRSTL
SC-GRSHML
SC-GRSQS
SC-RF
SC-GRSTLA
SC-GRSMTLA
19
RACK FEET
ROAD SERIES
SC-RC - Rack Caster - Converts
T-leg assembly into moveable system.
1 pk.
29.95
SC-GRSSMC - Super Multi-Clamp Has a larger multi-clamp section
with more gripping surface than the
SC-GRSMC or similar multi-clamp.
For mounting heavy items.1 pk. 41.95
SC-RF - T-Leg rack rubber feet.
2 pk.
10.95
SC-RF/R - Round foot for GPR Series
Racks. 2 pk.
8.95
SC-GRSMC - Multi-Clamp - For
mounting toms, cowbells, cymbals,
etc., to a standard 1-1/2” dia. rack
tube. 1 pk.
37.95
SC-GRSTL - Road Series T-Leg
Clamp - The Road Series T-leg clamp
is designed for maximum support and
stability of 90˚ T-leg assemblies.
1 pk.
35.95
SC-GRSAAC - Adjustable Angle
Clamp - Secures two tubes and allows
for angle adjustment.
1 pk.
50.95
SC-GRSQS - Road Series Quick-Set
Clamp - Allows for two position
(locking) angles which helps to
quicken setup and teardown of rack
system. Same clamp used on the
GRS-300QS Gibraltar rack system.
Primarily designed for use on
horizontal bar(s) and vertical leg bars.
1 pk.
59.95
SC-GRSSRA - Stackable Right
Angle Clamp - Allows two tubes to
meet at the same horizontal angle
and pivot up to 90˚ on a vertical leg.
1 pk.
40.95
SC-GRSHML - Memory Lock
(w/hinge) - Can be added to the rack
without sliding other components off.
1 pk.
16.95
SC-GRSRA - Right Angle Clamp Fixed 90˚ with hinged sides.
1 pk.
39.95
SC-GRSAR - Adjustable Right Angle
Clamp - Similar in design to the
SC-GRSRA right angle clamp. The
adjustable right angle clamp allows
multiple angle adjustments via a
geared drum key rod/bolt assembly.
1 pk.
48.95
SC-GRSTLA - Road Series T-Leg
Assembly - Rack T-leg assembly
with Road Series T-clamp attaches
to vertical tube (20” long). 1 pk. 46.95
SC-GRSMTLA - Road Series Mini
T-Leg Assembly - Mini version of the
SC-GRSTLA. Excellent for tight drum
setups (12” long). 1 pk.
45.95
THESE ARE A FEW OF THE WORLD RENOWNED DRUMMERS AND
PERCUSSIONISTS USING AND ENDORSING GIBRALTAR SERVICE
R ICKY L AWSON
T OMMY L EE
S COTT P HILLIPS
D ON A LIAS
W ALFREDO R EYES J R.
C ARL P ALMER
M ARK T ROJANOWSKI
K EVIN R ICARD
J OE M ORRIS
J UAN E SCOVEDO
N IR Z
R OBERT R ODRIGUEZ
W ILLIE G REEN
J OHN M ICELI
R ICK S TEEL
D AVID R OMERO
S TEVEN W OLF
J OE S TRONSICK
M ICHAEL W HITE
D ANNY R EYES
KCP-603 Printed in U.S.A. 01/01 45M
Visit Gibraltar On-Line at www.KamanMusic.com
Kaman Music Corp., P.O. Box 507, Bloomfield, CT 06002