Splitboard Crampons
Transcription
Splitboard Crampons
Splitboard Crampons • Recommended for icy skin tracks and ascents with increased exposure. • Two Function modes: Fixed and Mobile. • Works with Voilé Slider Track. • Max. board half width: 13.7cm. • Weight/pair: 1 lb/45g. *NOT COMPATIBLE with 2012-13 and newer Voilé Light Rail splitboard binding. voile.com Splitboard Crampons CRAMPON INSTRUCTIONS 1) Attach the included longer Slider Pin to your bindings using a girth hitch (see right). You must us the LONGER Slider Pin with these crampons. 2) Fixed Mode: Rotate the black block parallel to the crampon. Slide the notch at the back of the crampon under the heel pad. Align the holes of the crampon with the touring bracket holes and slide the pin through to secure the binding and crampon. FIXED MODE 3) Mobile Mode: Rotate the black block perpendicular to the crampon, then slide the binding onto the block and align the holes of the crampon with the touring bracket. Slide the pin through the holes to secure the binding and crampon. MOBILE MODE voile.com
Similar documents
Buffet Crampon Clarinets
In the 1970s some of the R13 Clarinet’s tone holes and keys were moved and the register vent was enlarged and lowered to improve the sound of a throat B♭. Following a revamping in 1995, the Buffet ...
More informationVoile Universal Splitboard Interface Set
1.) Remove the Slider Pin from each Slider Track. Slide off your Slider Track from the Nylon Location Blocks/Pucks. Make sure your Slider Pin is leashed to your binding to prevent losing in the sno...
More information