Kreg Jig K4 Master System Kreg Jig K5

Comments

Transcription

Kreg Jig K4 Master System Kreg Jig K5
CALL TOLL FREE TO ORDER 1 (800) 288-7483
45
KREG
Kreg Jig K4 Master System
Ultimate Technology. Ultimate Features.
The Ultimate Kreg Jig.
• Drill guide block is interchangeable between the bench top and portable bases.
• Bench top base features patent pending front clamping design.
• All the thickness flexibility you need. 1/8” incremental setting for materials from 1/2”
to 1-1/2” thick.
• Solid metal drill guide insert assures a clean, accurate pocket hole.
• Dust collection shroud means no more wood chips on your workbench and extended
drill bit life.
• Premium Face Clamp is the perfect clamp for drilling, assembly, and more.
• Jig bodies made of rugged, glass filled nylon composites.
K4MS
$149.00
Specifications:
- Drill Guide Lifetime Warranty
- 3 Drill Guides
- 2 Clamping Methods: Toggle and Face
Includes:
(1) K3 drill guide block, bench top base,
portable base, premium face clamp, material support stop, dust collection shroud,
drill bit, depth collar, allen wrench, driver
bits, screws and carrying case.
Demo
Available
Kreg Jig K5
The Kreg Jig K5 incorporates the best features of every Kreg Jig that came
before with upgrades you've never seen. That starts with an all-new clamping
mechanism that you can adjust without tools or adjusting nuts to match your
workpiece thickness. Just slide the clamp into place, "click" the large frontmounted clamp handle, and your jig is set to hold your workpiece tight every
time. Plus, you'll find large support wings to hold your workpiece steady - and
they have storage compartments inside. Add in a batch of other great features
like a standard swiveling dust-collection port, spring-loaded stop for the Drill
Guide Block, and, of course, the ability to remove the Guide Block for portable
use, and you have, quite simply, the most advanced Kreg Jig yet.
K5
$139.00
Includes:
Kreg Jig K5 Base with Ratcheting Front-Side Clamp, Extension Wings, Swiveling Dust Collection Port,
Drill Guide Block, Spacer Block, Workpiece Stop, Drill Bit Setup Block, Hex-Shank Stepped Drill Bit, 6"
Driver Bit, Stop Collar, Allen Wrench, User Guide, Starter Screw and Plug Pack.
Specifications:
Body
Material
Number of Drill
Guides
Glass Filled Nylon
Ballew Saw & Tool, Inc.
3
Drill Guide
Spacings
9/16", 7/8", 1-7/16"
Clamping Method
Ratchet Clamp on
Benchtop Base
325 South Kimbrough Ave. | Springfield, MO | 65806
Workpiece Thickness
Settings
1/2" , 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4",
1-3/8", 1-1/2"
1 (800) 288-7483
46 BORING & DRILLING
DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
KREG
The Mini Kreg Jig
Minimal.
When you need a pocket hole in a tight spot, or require maximum portability, the Mini
Kreg Jig® is the solution. Features hardened steel drill guide and glass reinforced nylon
body complete with a chip extraction hole. The jig’s body is untapered so it clamps in
place easily. An added feature is the plug setter that is incorporated into the base of the
jig. Start the plug into the hole, then place the groove of the Mini Kreg Jig® onto the
back of the plug and push into place. A real hand and time saver. The Mini Kreg Jig® is
included when you purchase the Kreg Jig® K2000 ProPack. Lifetime warranty and 30
day satisfaction guarantee or your money back. Shop Tip: For squeaky floors, clamp
Mini to joist, drill upwards, and drive screw to pull flooring down tight.
Also available is the MKJKIT which Includes:
Mini Kreg Jig, KJD Drill Bit and KJSC/D Depth Collar
MKJ
Mini Kreg Jig®
$9.99
MKJKIT
Mini Kreg Jig® Kit
$21.99
Specifications:
- Drill Guide Lifetime Warranty
- Clamping Method: Works with a variety of common
clamps or any Kreg Face Clamp
- Screw Centering Ability: 1/2” to Unlimited.
Kreg Pocket Hole Machine Specifications
bTYPE
Drill Bits
Motor
Type
CFM Cycle
Time
Material
Clamping
Capacity
FOREMAN
DKDB drill bit:
3/8" shank dia.
3/16" pilot,
1/2" long
Pneumatic or
electric
6cfm at 50% duty
cycle (90-120 psi)
1 second
1-1/2"
DK1100TP
DK1100FP
DKDB drill bit
DKDB drill bit
3/8" shank dia.
3/8" shank dia.
3/16" pilot, 1/2" long 3/16" pilot, 1/2" long
Pneumatic, 1-1/4 HP Pneumatic, 1-1/4 HP
DK1100FE
DK3100
DK5100
DKDB drill bit:
2 DKDB drill bits
3/8" shank dia.
1 LHDKB-left hand
3/16" pilot, 1/2" long
3/8" shank dia.
1/16" pilot, 1/2" long
DKDB drill bit
3/8" shank dia.
1/16" pilot, 1/2" long
1cfm for clamping
cycle (90 psi min)
Electric, 1-1/2 HP
110V Single Phase
Electric, 1-1/2 HP
110V Single Phase
Pneumatic, 3/4 HP
4 or 5 Motors
1cfm for clamping
cycle (90 psi min)
20cfm at 50% duty
cycle (90-120 psi)
8cfm at 50% duty
cycle (90-120 psi)
8cfm at 50% duty
cycle (90-120 psi)
1 second
1 second
1 second
1 second
2 second
4"
4"
4"
4"
4"
Hole
Centering
Capacity
1/2" Material to
1-1/2" Material
1/2" Material to
1-1/2" Material
1/2" Material to
1-1/2" Material
1/2" Material to
1-1/2" Material
1/2" Material to
1-1/2" Material
1/2" Material to
3/4" Material
Dimensions
40 lbs.
19" x 14" x 23"
77 lbs.
19" x 14" x 23"
138 lbs.
19" x 14" x 23"
176 lbs.
19" x 14" x 23”
179 lbs.
19" x 14" x 23"
350 lbs.
7-3/8"
7-3/8"
7-3/8"
7-3/8"
7-3/8"
7-3/8"
N/A
N/A
N/A
N/A
3/4", 1", 1-3/4"
6"
$795.00
$2870.00
Weight
(HxWxD)
Tabletop
Height
On-Center
Spindle
Spacings
Price
www.ballewsaw.com
$3075.00
$3075.00
[email protected]
$3970.00
19" x 14" x 23"
$9345.00
Fax: 1 (417) 865-3797
CALL TOLL FREE TO ORDER 1 (800) 288-7483
47
KREG
K4 Kreg Jig
The Kreg Jig® is the perfect choice for DIY’ers and anyone new to
Pocket-Screw Joinery. Whether you’re building your first set of garage
storage shelves or making simple repairs around the house, the Kreg Jig®
can help you finish the job in less time, and with far less effort than you
ever thought possible. Its simple design gives you the confidence to start
the project, and with joints as easy as “Drill. Drive. Done!”
you’ll actually want to finish it.
K4
$ 99.99
Specifications:
- Skill Builder DVD Included
- Drill Guide Lifetime Guarantee
- Fast Action Toggle Clamp
- Doubles as a Repair Tool
Fast. Fun. Easy.
The D.I.Y. Kreg Jig.
Glass-Reinforced Nylon Body
The blue body of the Kreg Jig® is actually made from a
heavy-duty glass-reinforced nylon. This unique composite
material offers the resiliency and flexibility you need
without sacrificing the strength and durability Kreg
customers have come to expect.
Superior Angle
Unlike competing jigs with a shallower angle of
approach, the Kreg Jig® features an optimized drilling
angle specifically designed to increase driving efficiency
and minimize the overall size of the Pocket-Hole. The
result is a compact Pocket-Hole, less than 1-1/2” in size.
Wood-Chip Relief
The Kreg Jig® includes 1 wood-chip relief hole for
every Drill Guide hole, designed to keep the drill bit
clear of excess wood chips, increasing the longevity of
your drill bits, and allowing you to complete a perfect
Pocket-Hole in one plunge instead of three!
Kit Includes
Includes everything you need to get started with PocketScrew Joinery, including Kreg Jig®, Stepped Drill Bit,
6” Square Driver, Starter Screw Set, Starter Plug Set,
SkillBuilder™ DVD, and Quick-Start Guide, all inside a
compact and durable carrying case
Ballew Saw & Tool, Inc.
Hardened Steel Core
Drill Guides are subject to direct contact with the drill bit
every time a Pocket-Hole is created. The core of every
Kreg Jig® features hardened steel which carries a 100%
Lifetime Guarantee. The Kreg Jig®’s core shrouds the bit
and supports the workpiece thru 100% of the drill-stroke.
Large Clamping Recess
The Large Clamping Recess makes it easy to secure your
jig to your workbench using our multi-purpose Face
Clamps™ or any common bar clamp or c-clamp.
Sturdy Toggle-Clamp
The Kreg Jig®’s rear-mounted clamp design has been
around since the first Kreg Jig®. It’s a proven design
offering incredible rigidity and uncompromising work
piece hold-strength. Adjustments are as easy as releasing
the lock-nut, and rotating to the correct setting.
3-Hole Removable Drill Guide
Our patented 3-Hole removable Drill Guide lets you make
perfectly placed Pocket-Holes in a wide variety of
material widths and thicknesses, without ever having to
release the clamp and reposition the workpiece. The Drill
Guide can be removed completely from the benchtop
base and used for making repairs just about anywhere.
325 South Kimbrough Ave. | Springfield, MO | 65806
1 (800) 288-7483
48 BORING & DRILLING
DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
KREG
Pocket Hole Plugs
SOLID WOOD PLUGS
PART
DESCRIPTION
50 COUNT PRICE
200 COUNT PRICE
P-CDR
CEADAR
$6.99
$24.99**
P-OAK
OAK
$6.99
$24.99**
P-MAP
MAPLE
$6.99
$24.99**
P-PIN
PINE
$6.99
$24.99**
P-BAS*
BASSWOOD
$6.99
$24.99**
P-WAL
WALNUT
$6.99
$24.99**
P-CHE
CHERRY
$6.99
$24.99**
P-PNT PAINT GRADE
$4.99
$17.99**
For those times when Pocket-Holes won’t be hidden on the backside of your project or you want to highlight the decorative, use our
Pocket-Hole Plugs. Pugs are offered in 7 solid wood species, and 5 plastic plug colors for use on laminated surfaces.
** 200 Count Discontinued; Subject to Stock on Hand.
PLASTIC CAPS
PART
C-BRN
C-BLK
C-WHT
C-ALM
C-LTB
DESCRIPTION
BROWN
BLACK
WHITE
ALMOND
LIGHT BRN
50 COUNT PRICE
$6.99
$6.99
$6.99
$6.99
$6.99
hoo
epe
ou a
orre
ossi
rov
he jo
ind
/2”
/4”
-1/2
all s
tock
Plastic Plugs are great for laminated surfaces and come in several colors.
Drill Bits and Drivers
DRILLS
PART
KJD
KJD/200
DKDB
LH-DKDB
KJSC/D
DESCRIPTION
PRICE
DESCRIPTION
PRICE
For Mini, Rocket, K2, K2000 and K3
For K200 Drilling Press
For DK1100, DK3100 and Foreman
For DK3100 Center Spindle (left hand)
Depth Collar with Allen Wrench
hoo
epe
ou a
orre
old
tren
$16.99
$16.99
$34.99
$39.99
$2.49
DRIVERS
PART
D3
D6
D3HT
D6HT
DDS
D6X2
3", 2 Square Driver
6", 2 Square Driver
3" Driver with Hardened Tip
6" Driver with Hardened Tip
3" and 6", 2 Square Driver Combo
(2) 6", 2 square drivers
oar
om
tc.
ine
ap
tc.
i-L
pose
wood
$1.75
$2.75
$2.75
$3.75
$4.49
$5.49
KJD for Mini, Rocket, K2 and K2000 Kreg Jig®. One piece design eliminates clogging and provides a much smoother and
faster drilling stroke than the drill bits with replaceable center drills. Order KJD/200 for replacement bit for K200 drilling press.
DKDB for DK Machines. The DKDB has a dual - landed design and a very high grade alloy that combine to increase the
bit’s life. Because the bit is 3/8" diameter it can also be used in any of our other jigs as a premium replacement. Hex shank will
work in either Industry or standard chuck.
www.ballewsaw.com
[email protected]
Fax: 1 (417) 865-3797
ML
nc.
CALL TOLL FREE TO ORDER 1 (800) 288-7483
49
KREG
Self-Tapping Pocket Hole Screws
Screws are specially designed for pocket hole joiners. They feature a self-tapping auger
point that eliminates pre-drilling and a flat head that seats flush in the bottom of the
pocket hole.
Choosing the right screw.
We offer two thread types, two head styles and five different lengths to handle all
pocket hole applications. Find the right screw using the information below.
MAXI-LOC™ FINE
PART
e
SML - F125
SML - F150
Screw Length
Choosing the correct screw length
depends on the size of the material
you are working with. Using the
correct screw will eliminate the
possibility of breakthrough and
provide optimum hold-strength on
the joint.
Find your correct screw length:
1/2” Stock:
1” Screw
3/4” Stock:
1-1/4” Screw
1-1/2” Stock:
2-1/2” Screw
(all screw lengths assume joining
stock of equal thickness)
Thread Type
Choosing the correct thread type
depends on the species of wood
you are working with. Using the
correct screw will ensure maximum
hold pressure and dramatically
strengthen each joint.
Coarse Thread: Soft woods, and
Composites Plywood, MDF, Pine,
etc.
Fine Thread: Hard woods, Oak,
Maple, Walnut, Cherry, Hickory,
etc.
Hi-Lo: For Use as a general purpose screw and with medium hardwoods such as Poplar.
SML Maxi-Loc SPS Pan-Head
DESCRIPTION
7, Fine Thread, 1-1/4"
7, Fine Thread, 1-1/2"
100
$4.69
$5.19
500
$18.89
$20.99
1000
5000
$27.99
$31.49
$74.99
$84.99
Maxi-Loc™ Fine: Standard for Hardwood. Washer head keeps screw from crushing into bottom of pocket hole, especially when going through soft materials into hard materials.
MAXI-LOC™ COARSE
PART
SML-C1
SML-C125
SML-C150
SML-C2
SML-C250
DESCRIPTION
8, Coarse Thread, 1"
8, Coarse Thread, 1-1/4"
8, Coarse Thread, 1-1/2"
8, Coarse Thread, 2"
8, Coarse Thread, 2-1/2"
100
500
1000
5000
$4.49
$17.99
$26.99
$4.69
$18.89
$27.99
$5.19
$20.99
$31.49
$3.69/50 $14.69/250
-$5.19/50 $18.89/250
--
$69.99
$74.99
$84.99
$64.99/3000
$59.99/2000
Maxi-Loc™ Coarse: Standard for softwoods and composites. Washer head keeps screw from
crushing into the bottom of the pocket hole. 8 size and aggressive thread provide excellent
holding power in softwoods and composites like plywood, particle board and MDF. 1" length
great for making drawer boxes with 1/2" material.
MAXI-LOC™ HI-LO SCREWS
PART
SPS-HL125*
SML-HL125
DESCRIPTION
7, HI-LO Thread 1-1/4"
7, HI-LO Thread 1-1/4"
100
$4.00
$4.69
500
$15.00
$18.89
1000
$21.00
$27.99
5000
$75.00**
$74.99**
Hi-Lo Screws: Hard and Medium Woods. This is as close as we come to an all - purpose screw.
It’s thin like the SPS-F125 (below) so it will work in hardwoods like oak, but provides more
holding power and is harder to strip - out. Great for medium woods like cherry and poplar, and
in a pinch you can even use it in soft woods, plywood and particle board.
PAN HEAD SCREWS
PART
SPS-F1
SPS -C1
SPS- F075
SPS- F125
SPS- F150
DESCRIPTION
6, Fine Thread 1"
7, Coarse Thread, 1"
6, Fine Thread, 3/4"
6, Fine Thread, 1-1/4"
6, Fine Thread, 1-1/2"
100
$4.49
$4.49
$4.19
$4.69
$5.19
500
$17.99
$17.99
$16.79
$18.89
$20.99
1000
$26.99
$26.99
$26.99
$27.99
$31.49
5000
$69.99**
$69.99**
$64.99**
$74.99**
$84.99**
Pan Head Screws: This is the same screw as the Maxi - Loc, only without the washer head. 1"
fine works great for drawer fronts to 1/2" drawer boxes. New 1" coarse thread screw for assembling 1/2" drawer boxes.
**5000 Count Discontinued; Limited to Stock on Hand
Head Style
Choosing the correct head style depends on the species and size of the material you are working with.
The Maxi-Loc: washer-head screw is the most popular style, provides large surface area on screwhead
Pan-Head: slightly smaller shank and diameter head size, preferred choice for extremely hard woods
3797
Ballew Saw & Tool, Inc.
325 South Kimbrough Ave. | Springfield, MO | 65806
1 (800) 288-7483
50 BORING & DRILLING
DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
KREG
KREG DISCONTINUED ITEMS.
SUPPLIES LIMITED TO STOCK ON HAND. WHEN THEY
ARE GONE THEY ARE GONE!!!!
Part Number
Quik-Adapt
Description
Quick Change Adapter for round shank bits
Quantity/Per Box
Price
$7.99
P-CDR-200
P-CDR-1000
P-CHE-200
P-MAP-200
P-OAK-200
P-PIN-200
P-PNT-200
P-PNT-1000
P-WAL-200
P-WAL-1000
Cedar Plugs
200
1000
200
200
200
200
200
1000
200
1000
$24.99
$109.99
$24.99
$24.99
$24.99
$24.99
$17.99
$109.99
$24.99
$109.99
Pocket Screws 1-1/2”, #6 Fine, Pan Head
Pocket Screws 1-1/2”, #7 Fine, Washer Head
Blue-Kote WR Pocket Screws 1-1/4”, #8 Coarse,
Washer-Head
Blue-Kote WR Pocket Screws 1-1/2”, #8 Coarse,
Washer-Head
Blue-Kote WR Pocket Screws 2-1/2”,#8 Coarse,
Washer-Head
Pocket Screws 1-1/4”, #7, HI-LO
5000
5000
5000
$84.99
$84.99
$89.99
5000
$99.00
50
$5.79
30
125
$5.49
$19.99
Blue-Kote WR Pocket Screws 2”, #8 Coarse,
Washer Head
Pocket Screws, .75”, #6 Fine, Pan-Head
Pocket Screws 1”, #6 Fine, Pan-Head
Pocket Screws 1”, #7 Coarse, Pan-Head
Pocket Screws 1”, #8 Coarse
Pocket Screws 1-1/4”, #6 Fine Pan-Head
305 Stainless Steel Pocket Screws 1-1/4”,
#8 Coarse, Washer-Head
305 Stainless Steel Pocket Screws 1-1/4”,
#7 Fine, Washer-Head
3000
$74.99
5000
5000
5000
5000
5000
1000
5000
1000
5000
$64.99
$69.99
$69.99
$69.99
$74.99
$125.99
$388.49
$131.49
$409.99
SPS-F150-5000
SML-F150-5000
SML-C125B-5000
SML-C150B-5000
SML-C250B-50
SML-C2X250-30
SML-C2X250-125
SML-C2B-3000
SPS-F075-5000
SPS-F1-5000
SPS-C1-5000
SML-C1-5000
SPS-F125-5000
SML-C125S5-1000
SML-C125S5-5000
SML-F125S5-1000
SML-F125S5-5000
www.ballewsaw.com
Cherry Plugs
Maple Plugs
Oak Plugs
Pine Plugs
Paint Grade Plugs
Walnut Plugs
[email protected]
Fax: 1 (417) 865-3797
CALL TOLL FREE TO ORDER 1 (800) 288-7483
51
KREG
KREG DISCONTINUED ITEMS
(Cont.)
SML-C150S5-5000
305 Stainless Steel Pocket Screws 1-1/2”,
#8 Coarse, Washer-Head
5000
$419.99
Part Number
SDK-C2W-100
SDK-C2W-700
SML-C125W-100
SML-C125W-1000
SML-C125W-5000
SML-C125-100
SML-C125-1000
SML-C150B-100
SML-C150B-1000
SML-C150W-100
SML-C150W-1000
SML-C150W-5000
SML-C2W-50
SML-C2W-3000
SML-C2B-50
SML-C2B-250
SML-C250B-50
SML-F125W-100
SML-F125W-1000
SPS-F125W-1000
SPS-F125W-5000
SPS-F1W-100
SPS-F1W-1000
SPS-F1W-5000
SML-C2-3000
SPS-HL125-500
SPS-HL125-5000
Description
Weather Resistant Self-Tapping Deck Screws
Quantity/Per Box
100
700
100
1000
5000
100
1000
100
1000
100
1000
5000
50
3000
50
250
50
100
1000
1000
5000
100
1000
5000
3000
500
5000
Price
$7.49
$49.99
$6.38
$35.99
$119.99
$4.69
$27.99
$6.79
$40.99
$6.75
$37.49
$127.99
$4.49
$89.99
$4.49
$16.79
$5.79
$6.38
$35.99
$35.99
$119.99
$5.99
$34.99
$99.99
$64.99
$15.00
$75.00
NZ03-B
KMS7103
KMS7507
KMS7508
KMS7727
KMS7728
KMS7831
KKS1050
Ballew Saw & Tool, Inc.
Weather Resistant Hole Pocket Screws 1-1/4”,
#8 Coarse
Pocket Hole Screws 1-1/4”,
#8 Coarse
Pocket Hole Screws 1-1/2”, #8 Coarse
Weather Resistant Pocket Screws 1-1/2”,
#8 Coarse
Weather Resistant Self-Tapping Screws 2”,
#8 Coarse
Blue Kote Pocket Screws 2”, Coarse
Blue Kote Pocket Screws 2-1/2”, Coarse
Weather Resistant Self-Tapping Pocket Screws
1-1/4”, #7 Fine, #2 Square Drive
Weather Resistant Self-Tapping Pocket Screws
1-1/4”, #6 Fine, #2 Square Drive
Weather Resistant Self-Tapping Pocket Screws
1”, Fine Thread, #2 Square Drive
Pocket Hole Screws 2”, Coarse Thread
Pocket Screws #7, HI-LO 1-1/4” Pan-Head
Full Extension Drawer Counting Brackets
Precision Miter Gauge Add-on System
Mini-Trak – 24” (2’)
Mini-Trak – 36” (3’)
4’ Non-Adhesive Measuring Tape (LH Reading)
3.5 Meter Self-Adhesive Measuring Tape (RH)
Perfect Miter Attachment for Kreg Swing-Stop
& Solid-Stop
Kreg Klamp Vise Plate
325 South Kimbrough Ave. | Springfield, MO | 65806
$9.99
$59.99
$11.99
$14.99
$4.99
$7.49
$19.99
$34.99
1 (800) 288-7483

Similar documents

PH Brochure 11-2006.indd - Chesapeake Woodworkers Sales

PH Brochure 11-2006.indd - Chesapeake Woodworkers Sales Pocket Hole technology has been taken to a whole new level! The innovative K3 Kreg Jig® is packed with exciting new features and is the first Kreg Jig® system that is designed with the ability to b...

More information

Kreg - Maverick Hardware

Kreg - Maverick Hardware On-Center Spindle Spacing:

More information

Original - Ballew Saw and Tool

Original - Ballew Saw and Tool or for use on the job site since it runs on 110V electricity and requires no compressed air. The pneumatic model (DB55) is the machine of choice for the small production shop.

More information