VIBRATING TABLE CATALOG

V I B R AT I N G TA B L E S
http://www.VIBCO.com
FLAT TOP TABLES
HEAVY DUTY
Engineered table
top with supports to
avoid fatigue cracks
Inflatable
rubber
mounts
Sturdy table
stand
Speed
adjuster
available
Foot pad for
securing table
to floor
Electric, pneumatic or
hydraulic vibrator
VIBCO’s vibratory flat top tables offer a fast, efficient and economical method for compacting a wide variety of materials – powdery, granular or flaky – in boxes, drums or cartons. They are versatile and widely used for industrial applications to package, shock and fatigue test and for densifying refractory blocks, concrete products. They can also be
used as shakeouts for some foundry flasks. Let VIBCO quote you on your next table.
A DESIGN TO MEET EVERY NEED:
Low profile vegetable packer
Packing table with dual
vibrators
Packing table with
electric vibrator
Fertilizer bag packer
8” dual table for
marble sink tops
Table for 5 ton concrete form
2
Small parts sorting table
Table with pneumatic
vibrators & solenoid
controls
PLATFORM TABLES
LOW PROFILE
DRUM PACKER
Adjustable
speed & force
115 volt heavy
duty vibrator
Low profile drum
packer 3” off floor Model SCR-DP
Runner to
secure to floor
Heavy steel
top for long
wear
VIBCO’s Vibrating Drum Packer is a popular unit for densifying a wide range of material from spices to nails in drums or
cartons. The V-shaped guide holds the drum in place and
prevents it from vibrating off the platform. The SCR-DP table
is 24” wide x 36” long and stands 3” off the floor. It can easily be slipped under a filling station.The table is equipped with
a 115 volt 1/2 HP 6.5 amp adjustable force and speed vibrator.The vibrator can be adjusted between 0-1400 lbs. of force
and 0-4000 VPM (vibrations per minute). Table capacity is up
to 600 lbs. Shock absorbers provide total isolation between
floor and table.floor. See below for different styles.
Adjustable brackets for
drums or boxes
Shock absorber to eliminate
vibration transfer
The low profile tables with two vibrators can be made to
handle up to 10,000 lbs. of material. They stand 6” off the
floor. See below for different styles.
8000 lbs. packing table
3-drum filling table
Gaylord
packing
table with
rails for
wood skid
Low weight Gaylord packer
with one vibrator
Drum packer, 24” x 32” x 3”, powered by two quiet Model
BVS-570 Air Turbine Vibrators, for use in an explosive dust
atmosphere. Load capacity up to 1200 lbs.
3
GRID TOP TABLES WITH
ROLLER CONVEYOR
VARIABLE SPEED and VARIABLE FORCE
Heavy duty
roller conveyor
Inflatable
rubber shock
absorbers to lift
& lower table
Heavy duty
electric motor
vibrators
Tube construction
frame for strength
VIBCO Compaction Table Features:
• Includes U.S. built VIBCO Heavy Duty Electric Motor
Vibrators for vertical linear vibration.
• Standard vibrators offer adjustable force within a
preset frequency. Variable force/speed control is an
option
• Includes airspring isolators for lifting mold
boxes off the roller conveyor during vibration cycle.
VIBCO has many years of experience in designing and
building vibratory compaction tables for materials from
oatmeal to concrete to sand, and even nuclear reactor
waste. Each VIBCO vibratory compaction table is properly designed for its purpose and expertly built. It is easy
to install and operate.
Let VIBCO quote you on your next vibrating table.
• Heavy duty roller conveyors take any load.
Vibco’s Grid Top tables incorporate the latest design features. They are functional and sturdy. Installed at the filling station
on an in-line conveyor system, the mold or container is rolled into position over the grid while in low position. As the grid
is being raised, filling begins and the vibrator is started. After mold or container is filled and densified, airmounts are
deflated, placing the load on the conveyor where it is rolled forward and th next one is moved into filling position.
4
Although these tables are of a standard shape and size, they can easily be adapted to fit your particular purpose with
vibrators of different t frequencies and force output to match any job.
GRID TOP TABLES
TO FIT IN WITH EXISTING ROLLER CONVEYOR
Spaced to fit existing
conveyor
Heavy duty
steel frame
Heavy duty
tube
construction
Inflatable
rubber shock
absorbers to lift
& lower table
Heavy duty electric,
pneumatic or hydraulic
vibrators
VIBCO’s GRID TOP TABLES
are LIGHTER and STRONGER
Used in conjunction with roller conveyors for:
Compaction of NO-BAKE sand in foundry flasks,
casting concrete products, settling granular, flaky or
powdery materials in shipping containers etc. Sizes
to fit your particular need will be quoted upon
request. Give dimensions A to F.
VIBCO’s design utilizes high-strength tubular steel, which is 4x stronger and much lighter than the angle irons other
tables are made from. The result is a more effective table. Less energy is absorbed by the dead weight of the grid top.
No-bake sand compaction in foundry
Grid table straddling scale
Grid table straddling high floor scale
High grid for high lift
Extended table base for scale
Drum packer in roller conveyor line 5
VIBRATING TEST TABLES
• Simulate Handling &
Transportation Shocks
• Verify Integrity of Electric Circuits
• Removes Dangerous Residue
• Detect Marginal Connections
Patented “Live-Top”
• Stop Costly Field Service Calls
• Handles both Sub-Assemblies &
Complete Chassis
• Safe! No Harm to Sound Circuits
• Inexpensive Full Range Control
Heavy duty all welded
construction
Variable Speed Control
Overload Protection
On-Off convenient foot
switch
Inflatable rubber
shocks for almost
100% vibration
isolation
TABLE MODEL US-RD
24” x 24” x 36” High
VIBCO’s test tables result in savings on manufacturing costs, increased product reliability and greater customer confidence by detecting future failures right in your own plant, prior to shipment. Defective electrical components and
connections fail under the induced vibration, helping you to quickly identify the problems. This eliminates embarrassing and costly repair and difficult tracing of circuits in the field. The simulation of transportation and handling shocks,
on the Vibco test table give the added advantage of showing up the defective solder joints, marginal connections and
faulty components.
Forces generated will not, however, effect components of sound integrity../ the vibration also removes potentially
harmful residue such as pigtail clippings, solder splashes and other debris lodged in the chassis. Vibco’s test tables
are also extensively used in fatigue testing of many, varied electronic and space industry products, including: radios,
TVs, military hardware, lights, computers, etc.
Over 40 years of vibration know how enables us to “tailormake” a vibrating table to fit your needs as to size, force,
frequency and amplitude. Consult our Engineering department.
PATENTED “LIVE-TOP” TABLE
Exclusive Vibco design assures full and even vertical vibration in all areas of the table top. This enables the quality
control station to utilize the full potential of the available working area. Quality control can now standardize test procedures now that consistency of testing and reliability of results is assured. Vibco’s wide choice of variable frequency
and constant frequency equipment gives you the ultimate in low cost product liability testing.
SPECIFICATIONS
Model US-900, 10000 VPM (*vibrations per minute - speed will vary with load) adjustable eccentrics with 3 force settings at 10000 VPM Setting 1, 600 lbs. of centrifugal force; Setting 2, 950 lbs.; and Setting 3, 1100 lbs., 3.5 amps;
115 volt will handle test pieces up to 125 lbs. Model US-1600, 9000 VPM*, 3 force settings, 1100, 1600, 1900 lbs.,
4 amps 115 volt will handle test pieces up to 200 lbs.
6
FOR QUALITY ASSURANCE
TABLETOP MODELS (standard)
6 x 12
12 x 12
18 x 18
Standard US-TT Test Tables above are available with 6” x 12”, 12” x 12”, or 18” x 18” aluminum work surface. US-TT
Tables are ideal for testing printed circuits, plug boards and other small items. The US-TT table is supplied with SPC
FREQUENCY (speed) control and a 115 volt 10,000 VPM (vibrations per minute) motor vibrator producing up to 100
lbs. of force. These small tables can also be supplied with pneumatic vibrators, other electric vibrators or with special
designs, see below.
Table with hold-down clamps
Pneumatic test table
Table with outside rails
VIBRATING TEST
TABLES BUILT TO
MEET YOUR NEEDS
Vibrating table used to test density and
material weight for each load. Table also tested for weldment cracks and fatigues during a
normal 24 hour test cycle.
US-SA table with straps to
hold test module to table top.
Table with special control
circuits.
US-RD table testing electronic
prosthesis.
Table for reliability testing instrument packages.
7
SPECIAL PURPOSE TABLES
TABLES – ANY SHAPE FOR ANY PURPOSE
Vibrating roller
conveyor in
production line
Adjustable height table with
railing
Packing table for cartons
Depeaking materials
in carton before closing
FT 18” x 18” x 44” table with
a variable high frequency
vibrator for the making of
molds for precision castings
used in orthopedic surgery,
such as hip joints, etc.
Height was determined by a
stationary microscope under
which the work was done.
Pneumatic vibrator on
sorting table
Shake out table with casters
Table to fit between large roller
conveyor for packing gaylords on
wood pallets
Small carton packer
VIBCO, INC.
75 Stilson Road, P.O. Box 8
Wyoming, RI 02898
E-Mail: [email protected]
Phone: (401) 539-2392 / (800) 633-0032
FAX: (401) 539-2584
http://www.VIBCO.com
West Coast:
Phoenix, Arizona 85254
Phone: (480) 596-1809
(800) 633-0032
FAX: (480) 596-1614
SEE US AT www.VIBCO.com
Canada:
2215 Dunwin Drive
Mississauga, Ont.L5L 1X1
Phone: (905) 828-4191
(800) 465-9709
FAX:
(905) 828-5015
7902D VIBCO, INC.