WIRETEKNIK AB

Comments

Transcription

WIRETEKNIK AB
Portable roller swagers
WIRETEKNIK AB
Repslagargatan 17 B
SE-118 46 Stockholm
Tel. +46 8 643 67 33
Fax +46 8 641 70 08
E-mail [email protected]
We replace
brute force
with rollers
T
he yacht market was
where we began.
Our first machine
was developed in
the mid-seventies. A machine
that did away with convention.
All previous concepts of fitting
terminals onto full-steel wire
rope and solid rod were turned
upside down. Further, the terminal was also straight, not
cur ved, as was usual hithereto.
The principle is simple. The
terminal itself drives the
rollerdies. The machine works
with a freely rotating pair of
rollers, driven when the terminal is drawn between them. It
is a simple and robust design
with the minimum of movable
parts, making it reliable both
in the field and in rational production.
Development was quick. In
many fields, the need for high
strength swaged terminals is
considerable. The machines
perform equally effectively on
solid rod as they do on fullsteel wire. The breaking load
is as high as that of the rod or
wire.
pump, an electric motor or
compressed air. Due to the
portability, a permanent onsite
solution can be achieved in all
circumstances. The range is
wide, and the capacity is from
1,5 mm - 44 mm, wire or rod.
SPELTER SOCKETS
AND SLEEVES
REPLACED
Our technique provides a new
alternative to sleeves, spelter
sockets and the joining of
nonweldable materials.
ELECTRICITY, AIR
OR MAN POWER
A big advantage with our
swagers is their portability.
One man can do the job,
whether he uses a manual
LLOYD’S CERTIFICATE
new ideas and solutions to
problems where often old routines dominated. We make an
inventor y of a customer’s
needs and suggest new or improved solutions. We cater for
ever ything from dif ferent
forms of retention to special
test-rig terminals for strain
testing new, special hight-tensile, line designs.
Our customers
Among the companies placing
their confidence in us are Atlas Copco, Alfa Laval, British
Rail, NATO, Seldén Mast AB,
Spine Robotic, US Navy,
Yamaha, Swedish Rail, the
Swedish Army and National
Power, Swedish Forest industry, the Commercial Fishing
Navy and the University of
Stuttgart.
Evidence of the strength and
reliability of our technique is
the approval from Lloyd’s
Register of Shipping.
Our policy
Development
consultants
Our policy is one of the
continual development of safe,
reliable
and
functional
fastenings for cables, wires and
rods together with further
development of our patented
terminal presses. We sell not
only machines and terminals,
that are designed and adapted
to mect the requirements of
our customers, but also
complete and finished cables.
Today we also act as development consultants to many of
our customers. We produce
Pulling device for ball terminal.
Electro/hydraulic
Our machines in different fields
Don Valley
Athletics Stadium
Sheffield.
22 & 16 mm Norselay cables
10 & 12 mm I x 19 Stainless
steel cables.
Rigger: Guy Linking Ltd.
Essex U.K.
Machines: A-250 & A-400
The Trans Manche Link
(Channel Tunnel).
Mainmast support: 1x19 26 mm
stainless steel cables.
Glass panel stabilizer: 16 mm
Stainless cables.
Rigger: Guy Linking Ltd. Essex
U.K.
Machines: A-300 & A-400
Spectators Bridge
at penguin enclosure
Edinburgh Zoo.
Catenaries: 1x19 26 mm
stainless steel.
Hangers: 1 x 19 10 mm.
Rigger Guy Linking. Essex,
U.K.
Machines: A-400 & A-250
Fashion Garden
Amsterdam.
Wire-rope: Dyform Stainless
steel 8, 10, 12 & 16 mm
Rigger Staalkabel B. V.
Amsterdam NL.
Machines: A-200 & A-300
City Hall
Amsterdam.
Staircase:5 mm 1x19
Stainless Steel Cables
Rigger: Staalkabel B.V.
Amsterdam NL
Machine: A-100
J-yacht Endeavour
Wire construction 1 x 19
14 to 26 mm stainless
steel.
Rondal Spar
Shipyard: Royal Huisman
Rigger: Staalkabel B.V.
Machines: A-300 & A-400
Road safety barrier
Wire-rope 3 x 7 19 mm galvanised
Machine: Custom design
Rope testing
The leading wire rope
testing institute in Europe, Institute für Fördertechnik, Stuttgart, Prof.
Dr. Feyrer uses a Wireteknik A-300 to put end
connections to their test
ropes. Especially in tension-tension fatigue tests
they achieve far better
results than with other
end connection.
Our machines
A 250
A-100
Swaging range: 1,6 mm (1/16 in) 5 mm (3/16 in)
Dimensions: L 500 mm (19 3/4 in) x W 300 mm (11 3/4 in) H100 mm (4 in)
Weight: 12 kg (26 lbs)
Swaging range: 2,5 mm (3/32 in)- 12 min (1/2 in)
Dimensions: L 940 mm (37 in) x W 390 mm (1 5 3/8 in) x H 180 mm (6 9/32 in)
Weight: 37 kg (82 lbs)
A 200
A 300
Swaging range: 1,6 mm (1/16 in) - 8 mm (5/16 in)
Dimensions: 1, 430 mm (17 in) x W 280 mm (11 in) x H 120 mm (4 3/4 in)
Weight: 18 kg (40 Lbs)
Swaging range: 2,5 mm (3/32 in)- 16 mm (5/8 in)
Dimensions: L 975 mm (38 in) x W 390 mm(15 3/8 in) x H 240 mm (9 1/2 in)
Weight:- 61 kg (135 lbs)
A 400
Swaging range: 10,0 mm (3/8 in) - 28 mm (1 1/8 in)
Dimesions: L 1 270 mm (50 in) x W 560 mm (22 in) x H 230 mm (9 in)
Weight: 150 kg (330 lbs)
A 500
Swaging range: 16 mm (5/8 in) - 44 mm (1 3/4 in)
Dimensions:: L 2 400 mm (94 1/2 in) x W 870 mm (34 1/4 in) H 400 mm (15 3/4 in)
Weght: 350 kg (770 lbs)

Similar documents

Portable roller swagers

Portable roller swagers Swaging range: 16 mm – 38 mm (5/8 in – 1 1/2 in) Dimensions:: L 2400 mm (94 1/2 in) x W 870 mm (34 1/4 in) H 400 mm (15 3/4 in)

More information

Swagers - Fenn Torin

Swagers - Fenn Torin Long Die Swagers: For tapering tubing up to 24” long. Fenn Long Die Swaging Machines produce long, shallow tapers for furniture legs, sporting goods, aerospace products, and more, economically and ...

More information