automobile directory - Bureau économique et Commerciale de la

Transcription

AUTOMOBILE DIRECTORY
An initiative from AWEX – CENTRE OF MONS
Rue du Chapitre 1
B - 7000 MONS
Director: Pierre LIBIOULLE
Tel: 32-(0)65316378 - Email: [email protected]
June 2014
TABLE OF CONTENTS
MANUFACTURING / TRANSFORMATION
1) Metal
2) Plastic
3) Composite
4) Textile
5) Specific items
6) Measuring / Control instruments
7) Electrical equipment / Navigation
VEHICLES EQUIPMENT - TRANSFORMATION - CUSTOMIZATION
1) Professional
2) Individual customer
RECONDITIONING / PREPARATION
COATING
1) Metal items
2) Paintings - Coating
3) Oils and lubricants
4) Adhesive
IT
FORMATION
UNIVERSITY
WASTE TREATMENT
MANUFACTURING / TRANSFORMATION
1) Metal
ARCELOR MITTAL
BRITTE MUSTAD
CAPAUL
CELEAH GROUP
DASCOTTE
DRADIN V. & FILS
ELOY & BECKER
FABRIRESSORT
FILAME BRUSSELS
HEWA
JTEKT TORSEN EUROPE
LES RESSORTS WILFART
MECANIQUE RESSORT BELGIUM
NEW ABRACO SERVICES
PEGARD PRODUCTICS
POLMANS
PRECIMETAL PRECISION CASTINGS
PRECISION LIEGEOISE
PRODUCT ENGINEERING SERVICES
REFRICAR
RESSORTS KESSEN
RESSORTS RENSON
R.TEC RACING TRADING ENGINEERING AND CONSULT
SETTAS (DONCASTERS)
SHUR-LOK INTERNATIONAL
TAILORED BLANK LIEGE (ARCELOR MITTAL GROUP)
TECHNOVAL
TECNOLON WORKS
THISE
TI GROUP AUTOMOTIVE SYSTEMS
VANHULEN HIGH PRECISION SPRINGS
VANWERS (ATELIERS FERNAND)
WOIT
2) Plastic
CO-JOINT
ECOPLAST TECHNOLOGY
ELOY & BECKER
FERONYL
GAMMA-WOPLA
IPIC PLASTIC
POLYONE
PRECICAL
PROCOPLAST
SERVIPLAST
SIMONIS PLASTIC
3) Composite
AGC GLASS EUROPE
ALKAR TECHNOLOGY
ARMACELL BENELUX
BODAIR
DAYCO SACIC
DIMMA DESIGN
ELOY & BECKER
FERONYL
GILLET AUTOMOBILES
GRANDO
ISOMATEX
LAZZERINI
NANOCYL
NGK CERAMICS EUROPE
RECTICEL
RIOGLASS BELGIUM
SAINT-GOBAIN GLASS BENELUX
SIMTECH
T&B CARBON MANUFACTURING
4) Textile
BELGIAN FIBERS MANUFACTURING
PROCOTEX
SOCIETE COMINOISE DE MAILLE INDUSTRIELLE (SOCOMAILLE)
TREVIRA BELGIUM
5) Specific items
APPLUGS
ATELIERS DELPORTE
BEVIL
BLICQUY (LES ATELIERS DE)
CARLOR ENGINEERING
CERSA
CETEOR
CISSOID
CO-JOINT
DECOLTAFRAMO
DELADRIERE ETS
DELAUNOIT GROUP
DELTRIAN INTERNATIONAL
EURO-LOCKS
FEDERAL - MOGUL
GALVAMETAUX
GANTREX
ICOR
IDEATEC
LECLERCQ ETS
MANTHYDRO
NEXANS BENELUX
RACING TRADING ENGINEERING AND CONSULT
REFRICAR
SIMA
SOTEBA
SPYTANK
UDF AUTOMOTIVE BELGIUM
WARNY & CIE
6) Measuring / Control instruments
4MUST - 4 MOBILITY URBAN SECURITY TRAFFIC
BREUER TECHNICAL DEVELOPMENT BTD
DSI DELTA SERVICES INDUSTRIELS
ELCOMETER
EUTOMATION & SCANSYS
G-TECH2
HUBITOOLS
IDEATEC
LASEA
LASERCO LASER COATING DIAMOND TECHNOLOGY
MICROMEGA DYNAMICS
MICRONEXT
OPTRION
SKYNAM
SYREG
TRIPY
V2i
7) Electrical equipment / Navigation
AUTO ELECTRONICS
AW EUROPE
ELOY & BECKER
ELPRINTA
PHELECT
TRAXXEO
VALEO VISION BELGIQUE
VEHICLES EQUIPMENT - TRANSFORMATION - CUSTOMIZATION
1) Professional
AUTOGRAPHE
BODY-CONCEPT.BE
DEKNUDT AUTOPARTS
MECELFIN
MOVENA
TINT-TECH
VTC
2) Individual customer
911 (9 ONE ONE) MOTORSPORT
ATELIER DE L’ARTISAN
BEAUJEAN
BEAURAING STEPHANE - SBG CARCENTER
CARACTERE AUTOMOBILE
CARAT DUCHATELET
EXPRESSION
HANDICAP-CAR
IMPERIA AUTOMOBILES
INNOVATIVE PRODUCTION
LISMONDE DANIEL - HIGH TECH
MONO BELGIUM CORPORATION
MORETTE
SURAIN
TUNINGBOX
RECONDITIONING / PREPARATION
BELGIUM TRUCK TECHNOLOGY
GEFCO
KRONOS
MATHONET MARCEL
MOSA FREIN
RECTILUX
SPEED-UP
THERMO-CLEAN WALLONIE - FRANCE NORD
COATING
1) Metal items
ADVANCED COATING
METALSAB
RADSYS
2) Paintings - coating
ARPADIS GROUP
LAMBIOTTE ET CIE
METALSAB
POLYONE
RADSYS
VALCOLOR
YMAX
3) Oils and lubricants
ASTA TECHNOLOGIES BELGIUM
BIRAL LUBRICANTS
CANDICAR EUROPE
KLÜBER LUBRICATION
SADAPS BARDAHL ADDITIVES & LUBRICANTS
SOGELUB
TECNOLUB
YMAX
4) Adhesive
MACTAC EUROPE
YMAX
IT
ACAPELA
AGESYS
BUREAU CONSEILS ET SERVICES BCS
D-TECH ELECTRONIC
DYNATEK
EMBEDDED CAFÉ INTEGRATION SERVICES ECIS
EUTRONIX
E-XSTREAM ENGINEERING
FREE FIELD TECHNOLOGIES FFT
GLOBAL DESIGN TECHNOLOGY - GDTECH
GREEN PROPULSION
LMS
MITRACOWALL
TRAXXEO
VISIO ING CONSULT
FORMATION
CAMPUS AUTOMOBILE SPA-FRANCORCHAMPS
UNIVERSITY
UNIVERSITY OF LIEGE – LTAS – ENGINEERING AUTOMOTIVE RESEARCH GROUP
WASTE TREATMENT
ECO-DEC
RECYCAR
V&M RECYCLING
4MUST - 4 MOBILITY URBAN SECURITY TRAFFIC
Avenue des Dessus-de-Lives 2
5101 LOYERS
Tel: 32-(0)81304629 – Fax: 32-(0)81305106 - Mobile: 32-(0)475951807
Email: [email protected] - Web: www.4must.be
Contact person: Mr Paul FONSNY
4MUST distributes and installs a wide range of street furniture, signage and protections
such as columns, fixed bollards and retractable supports cycles and shelters, benches,
planters, litter bins, bus shelters and smoking, protection of pedestrian crossings, valves
and media information, mirrors, fixed barriers, revolving and leavening. A
comprehensive catalog combines quality and design.
Back to homepage
911 (9 ONE ONE) MOTORSPORT
Rue Alexandre-Louis Martin 19
7141 CARNIERES
Tel: 32-(0)64215270 - Mobile: 32-(0)496210050
Email: [email protected] - Web: http://911-motorsport.com
Contact person: Mr Dany LHOIR
9 ONE ONE MOTORSPORT is involved in modifying Porsches, from both the design and
the aesthetic point of view. The car can be changed from A to Z, including tyres, rims, kit,
headlights, tinted windows, upholstery, carpet, engine, sports exhaust, etc.
Tuning, Classic car repair, new paintwork
All kits are modular between models. They are made to order and are unique. All
bodywork is carried out, even the strangest, to give the car the desired look.
9 ONE ONE MOTORSPORT is always on the lookout for new kit ideas or new looks. It
works in several fields where it has a specialist in each field so that it can always find the
best solutions. Its specialists are located in different countries. Various materials are
used such as polyester and carbon.
An advert appears each month in RS Magazine, the magazine most read by Porsche
enthusiasts. A special report is also published at the end of each project.
Back to homepage
ACAPELA GROUP
Boulevard Dolez 33
7000 MONS
Tel: 32-(0)65374275 – Fax: 32-(0)65374276
Email: [email protected] - Web: www.acapela-group.com
Contact person: Mr Lars-Eric LARSSON
ACAPELA GROUP gives a voice to all your products and services. With perfect command
of its technologies, ACAPELA invents voice solutions to give speech to content and
enrich user interfaces in a natural and intuitive way.
Navigation, interactive voice response systems, accessibility solutions, e-learning,
talking Web and audio-books are amongst the first applications to have benefited from
the advantages of speech synthesis. Every day, new applications are popping up and
broadening the scope of possibilities.
A key player with 25 years of experience, ACAPELA provides specific and proven
solutions and offers its range of products, services and expertise in 25 languages and
over 50 voices.
ACAPELA GROUP develops its own voice technology solutions employing a research
team of experienced engineers and numerous language technicians. The company can
respond quickly to languages not yet covered by our technology through a network of
linguists. Developments range from language processing, to the creation of speech
corpora to signal processing. Voice solutions have become a natural way of managing
content and building a quality, user-friendly interface that ensures maximum user
enjoyment. Access tools, audio content management, call centres and contact
management, e-learning, edutainment, interactive voice systems, language learning,
navigation, on-line help, podcasts, productivity tools, public address systems, robotics,
SMS and MMS to voice, telematics, translation tools, unified communication, warehouse
management, reading Web pages, etc. are part of the long list of applications and
services that take advantage of the benefits of voice solutions.
Customers in the car sector:
Over 10 years of activity in the automotive field have given the ACAPELA GROUP solid
experience and expertise in the automotive field and understanding its customers’
needs. Over two million vehicles on the roads already use ACAPELA voices. ACAPELA’s
multilingual solutions have already been deployed throughout the world in 25 languages
and over 50 voices to revolutionize drivers’ in-car experience. Take a look at our list of
customers and you will find many actors in the sector that already rely on our voice
solutions.
Partners and customers:
Asahi Kasei, BMW, Bosch Blaupunkt, Citroën, Comroad, Daimler Chrysler, Harman
Becker, Magneti Marelli, Mp3Car, Navteq, OKI, PSA, Renesas, Siemens VDO, Tata,
TeleAtlas, Telion, Temic, Ulyces, Volkswagen, Yasssu.
Back to homepage
ADVANCED COATING
Rue de l'Avouerie 7
4000 LIÈGE
Tel: 32-(0)42545011 – Fax: 32-(0)42545010
Email: [email protected] - Web: www.advanced-coating.com
Contact person: Mr Jean-Pierre JANSSEN
ADVANCED COATING designs, develops and applies arc, cold, plasma and supersonic
spraying of metals, alloys, ceramics and carbides.
It is also a specialist in flat and cylindrical surface grinding as well as super finishing of
parts.
ADVANCED COATING also commercialises and ensures the after-sales service of
exclusive measuring systems: Penetrascope ® and Rollprof ® and Alpaga 500 Nano ®.
Back to homepage
AGC GLASS EUROPE
Chaussée de la Hulpe 166
1170 BRUXELLES
Tel: 32-(0)26743111 – Fax: 32-(0)26724462
Email: [email protected] - Web: www.agc-glass.eu
Contact person: Mrs Kathy MEURANT
Based in Brussels, AGC GLASS EUROPE produces, processes and distributes flat glass
for the construction industry (external glazing and indoor decorative glass), the
automotive industry, the solar industry, and specialist industries. It is the European
branch of AGC GLASS, the world's largest producer of flat glass.
Its baseline "Glass Unlimited" reflects the possibilities offered by:





glass as a material to meet a growing variety of needs (comfort, energy control,
health & safety, aesthetics);
innovation in products and processes, derived from sustained research in
advanced glass technology;
industrial facilities comprising 18 float plants, 6 automotive glass plants and more
than 100 processing and distribution units throughout Europe, from Spain to
Russia;
a worldwide marketing network;
the resources of its personnel motivated by operational excellence and
innovation.
Go to http://www.agc-automotive.com/ for a comprehensive range of automotive glazing:
windshields, sidelights, backlights, panoramic sunroofs. With advanced features: heated
windshields, infrared and UV protection, head-up displays …
AGC Automotive mainly produces and sells automotive glass for new vehicles and
aftermarket replacement glass, and has top global market share with the new vehicle
market. With activities in Japan-Asia, Europe, and North America, AGC Automotive
operates in a multi-cultural environment with employees from all over the world. Through
a globally integrated management system, the head office in Tokyo, operations in Japan
Asia, Europe, & North America, and the ARG (Automotive Replacement Glass) sector
work in unison to support customers’ activities and meet their needs in the areas of
development, production and, sales in the ever-evolving global automotive industry.
Back to homepage
AGESYS
Rue du Roton 57
6240 FARCIENNES
Tel: 32-(0)71390768 – Fax: 32-(0)71391003
Email: [email protected] - Web: http://users.skynet.be/agesys
Contact person: Mr Philippe BECKERS
• Industrial automation consultancy and producer
• Design and production of electrical boxes and controllers
• Programming of programmable robots (Siemens, Télémécanique, Omron, Hitachi)
• Process supervision (Axeda Wizcon, Siemens-Winncc)
• Installation of remote management systems (Tbox)
• Development of programmes for programmable robots
Main customer
Automotive sector: Volkswagen
Back to homepage
ALKAR TECHNOLOGY
Rue des Pastures 95
7130 BINCHE
Tel: 32-(0)64652082 - Fax: 32-(0)64341103 - Mobile: 32-(0)475624890
Email: [email protected] – Web: www.alkartechnology.com
Contact person: Mr Alain KINARD
StruXell is an innovative structural composite core material developed to meet
demanding architectural and structural applications.
Thanks to the huge variety of raw materials that can be processed, StruXell can be used
in any application where weight, strength, durability and design are the major
constraints.
Ideally built around the hexagonal honeycomb structure, StruXell provides high
mechanical properties that merge with a design that is aimed to enhance the appearance
of rough structures.
Currently made of polyester resin reinforced with continuous strand mat, StruXell can
also be made of biaxial carbon fiber and epoxy resin.
Back to homepage
APPLUGS
Rue de la Culée 9 C
5580 ROCHEFORT
Mobile: 32-(0)479743773
Email: [email protected] – Web: www.applugs.com
Contact person: Mr Pierre-André PUGET
APPLUGS is the builder of charging stations for electric vehicle two and four wheels
reference.
APPLUGS has a single purpose: building charging stations most consensual and
functional as possible to satisfy all the users of a tool for electric mobility.
APPLUGS working 100 % for electric mobility
Our produce are developed and designed for the European market.
They are modular and scalable.
And most importantly, they will please you
Back to homepage
ARCELORMITTAL LIEGE
Rue de la Digue 22
4400 FLEMALLE
Tel: 32-(0)42361111 - Fax: 32-(0)42362975
Email: [email protected] - Web: www.arcelormittal.com
Contact person: Mr Marc THEUNISSEN
Automotive
ARCELORMITTAL supports car manufacturers through the different stages of a vehicle’s
lifecycle. ARCELORMITTAL is a technology leader in advanced high-strength, galvanised
and coated steels – products that are used in the manufacturing of cars, vans and trucks.
About one fifth of the global car production is made from ARCELORMITTAL steel, and we
have an industrial presence in 22 countries spanning four continents.
In 2010 ARCELORMITTAL’s automotive division generated US$12.3bn in revenues and
delivered 13.5 million tonnes of flat steel. We have a global reach, with a presence in
South Africa, Europe, North America and Latin America. We are also present in India,
Turkey and China via joint ventures and in Japan via an alliance with NSC.
With a global presence in steel production and a network of 11 research centres, we aim
to support our clients through different production stages, from a vehicle’s design phase
through to mass production and after-sales service. More than half of our investment in
product research and development (R&D) is allocated to the automotive industry, and we
have five laboratories that are dedicated fully or partly to R&D for the automotive market,
in East Chicago in the US, Hamilton in Canada, and Maizières, Montataire and Gandrange
in France. Our R&D engineers work with carmakers throughout the lifecycle of their
products to develop automotive steels that are stronger yet lighter than existing
materials. We also develop new, cost-effective coatings to improve corrosion resistance,
paint appearance and application processes.
Our presence in different regions also gives us valuable insight into new market trends.
For example, ARCELORMITTAL provides steel solutions for low-cost cars and engine
powertrains to meet changing customer and market needs.
Our automotive steel solutions cover all metallurgical ‘families’ of steels – distinguished
by their different properties and compositions.
We anticipate that regulatory and customer expectations for lightweight cars will rise in
the future. Working closely with our automotive partners, we have developed S-in motion,
a set of automotive steel solutions to make cars lighter – without compromising safety –
and, in turn, reduce their carbon emissions.
With our current catalogue of automotive products, we support carmakers in optimising
weight and cost, while reducing carbon emissions and, crucially, ensuring that stringent
safety standards are met.
ARCELORMITTAL also has a specialized business unit for tailored blanks – a
manufacturing technology that improves the performance of car parts in a vehicle.
These tailored blanks, also called laser-welded blanks, are made by welding together flat
steel sheets of different thicknesses, grades and coatings. These products offer an
optimal combination of strength and ductility. They also reduce the weight of vehicles
and improve safety by enhancing crash performance. And we are a leading producer of
laser-welded blanks, which also reduce the cost of vehicles.
Back to homepage
ARMACELL BENELUX
Zoning Industriel les Plénesses - Rue des Trois Entités 9
4890 THIMISTER-CLERMONT
Tel: 32-(0)87325070 - Fax: 32-(0)87325071
Email: [email protected] - Web: www.armacell-core-foams.com
Contact person: Mr Bart JANSSEN
ARMACELL is a global innovator in foam technologies and the world leader in the market
for flexible technical insulation materials.
Apart from ARMAFLEX, the leading brand in the field of flexible technical insulation, we
produce thermoplastic insulation materials, covering systems, fire protection and noise
control products, special foams for a multitude of industrial applications and foam cores
which are used as composite materials.
Composites provide lightweight solutions for railway vehicles saving around 50 % of the
weight compared with traditional metal components. Lower overall weight translates into
less stress, faster acceleration and higher speeds, as well as reduced starting and
stopping inertia. Fire, smoke, and toxic fume (FST) are key safety criteria for interior
components of passenger railway carriages even more so when trains operate in tunnels
or underground, or without a crew.
Train body l Interior panelling in train’s l Buses l Trucks l Cars and camping trailers
Back to homepage
ARPADIS GROUP
Zoning Industriel - Zone D - Rue Jean Perrin 5 A
7170 MANAGE
Tel: 32-(0)64517613 - Fax: 32-(0)64517614
Email: [email protected] - Web: www.arpadis.com
Contact person: Mr Etienne WALRAVENS
The ARPADIS GROUP business consists of producing coatings and polymers for third
parties.
Increasingly, customers’ requirements have extended to the field of services, leading
ARPADIS to develop an industrial custom processing. Custom processing consists of
processing products for the account of the customer. It may involve repackaging or reassembly and synthesis of chemical products, on the basis of technology provided by the
customer, and using raw materials provided by the customer or provided by ARPADIS.
Back to homepage
ASTA TECHNOLOGIES BELGIUM
Place de Bronckart 7
4000 LIEGE
Tel: 32-(0)42206600 - Fax: 32-(0)42370048
Email: [email protected] - Web: www.asta3000.com
Contact person: Mr Sofiane NENACH
With a single application, ASTA 3000 cleans and protects the whole engine by eliminating
carbon deposits and by limiting further clogging which are the main cause of the engine
wear and its decrease of performance.
ASTA 3000 segregates carbonized oil deposits during combustion and evacuates them
during the exhaust phase. The valves and the combustion chamber are thus cleaned,
restoring an optimal output level to the engine.
ASTA 3000 treats the surfaces with a friction modifier, that sticks the more easily as the
temperature of friction areas is higher.
The non-stick coating of ASTA 3000 limits the return of carbon deposits, particularly in
the bottom of the fire ring’s groove. This latter can smoothly retract in its housing,
limiting friction and improving the combustion chamber’s seal.
Back to homepage
ATELIER DE L’ARTISAN
Zone Industrielle de Tournai Ouest 2 - Rue du Mont des Carliers 10
7522 BLANDAIN
Mobile: 32-(0)497541930 - Fax: 32-(0)69777501
Email: [email protected] - Web: www.adla.be
Contact person: Mr Frédéric DELAERE
Having always been involved in the field of the automobile and guided very young by
passion, I began with the restoration of VW, Vespa and others. But the passion of the
well-kept work, the beautiful automobile mechanics, old vehicles fast brought me to work
on more and more ambitious projects and very prestigious vehicles.
I thus passed of the restoration of popular cars in the restoration of vehicles such Aston
Martin, Jaguar, Ferrari, Maserati and other status cars, Aston Martin and AC staying my
favourite marks.
Having made of my passion my business, we bring to our customers a well-kept work of
precision and quality. They can enjoy the pleasure to drive their vehicle of collection,
renovated, in perfect working order and it for still of very long years.
Back to homepage
ATELIERS DELPORTE
Rue Hautem 54
7500 TOURNAI
Tel: 32-(0)69221816 - Fax: 32-(0)69212949 - Mobile: 32-(0)475731714
Email: [email protected] - Web: www.ateliersdelporte.com
Contact person: Mr Pascal BOLAND
The ATELIERS DELPORTE proposes the construction of "workstation" in the field of
automobile. An accent is put on the ergonomics of the finished product.
Parts for military vehicles
Back to homepage
AUTO ELECTRONICS
Chaussée de Bruxelles 29 D
7061 CASTEAU
Tel: 32(0)65334862 - Fax: 32(0)65730070 - Mobile: 32-(0)498517913
Email: [email protected] - Web: www.autoelectronics.be
Contact person: Mr Luigi DONNIACUO
The company has developed an electronic chip, called Eprom, intended to be installed on
diesel engines and/or essence of all brand cars manufactured after 1986. This chip
replaces the original chip and contains a new ignition curve and a new injection program.
Back to homepage
AUTOGRAPHE
Avenue Lavoisier 2
1300 WAVRE
Tel: 32(0)10476585 - Fax: 32(0)10476595
Email: [email protected] - Web: www.autographe.be
Contact person: Mr Mathieu de SAINT HUBERT
AUTOGRAPHE is the market leader in the fitting-out of commercial vehicles and
emergency services vehicles in Belgium. Since 1975 the company has offered the entire
infrastructure needed for standard vehicles to be converted into professional vehicles in
all kinds of sectors.
AUTOGRAPHE is chiefly active in the following market segments:






Fire fighting vehicles
Police vehicles
Medical vehicles and ambulances
Special vehicles
Vehicles for the transport of persons with reduced mobility and minibuses
Workshop and commercial vehicles.
Back to homepage
AW EUROPE
Avenue de l'Industrie 19
1420 BRAINE-L'ALLEUD
Tel: 32-(0)23891200 – Fax: 32-(0)23891210
Email: [email protected] - Web: www.aweurope.be
Contact person: Mr Michel KNOP
AW Europe is a world leader among specialist suppliers of automatic gear boxes and car
navigation systems (GPS).
We operate from two sites in Belgium: Mons (production, logistics) and Braine-l’Alleud
(R&D and administration).
Control software for automatic gearboxes, vehicle navigation (GPS) software and vehicle
navigation systems.
Automatic gearboxes (dynamometer test benches)
Main references:
Toyota, Volvo, Saab, Opel, Renault, Fiat, Volkswagen, Audi, Porsche, PSA, Ford, Land
Rover, Jaguar, Vauxhall, BMW, Lamborghini, Alpine, Grundig.
Back to homepage
BEAUJEAN
Chaussée d'Anton 50
5300 ANDENNE
Tel: 32-(0)85842290 – Fax: 32-(0)85842298 - Mobile : 32-(0)497418494
Email: [email protected] - Web: www.beaujeanconcept.be
Contact person: Mr Benoît BEAUJEAN
Car interior design
Since 1990, the House BEAUJEAN was imperative in the very closed European circle by
the arrangements of automobile inside.
We propose our services to the interior designers of the restoration of cars, to the
collectors and to the private individuals. We dress dashboards, central consoles, wood
panels from the most beautiful wooden magnifying glasses (walnut, elm, amboine, lemon
tree, maple). The set can be even enhanced by a net of marquetry of box tree, sycamore
or by a white charm





We realize whole parts as knobs of gear, steering wheels or working tablets
We oversee the work of saddlery and some leather to famous Belgian craftsmen,
certified by the house
We create and produce exclusively small series or complete kits for leading
importers, coachbuilders, interior designers specialized in the restoration of car
and independent garage owners
We fit out people-carrier vehicles "mobile offices" having all the modern
technology: from the WiMax to the satellite fax, from the refrigerator to the mobile
Coach Cinema.
We also apply these techniques to the internal dressing of sailboats, yachts and
planes as well as the woodwork of armorer's.
Back to homepage
BEAURAING STEPHANE - SBG CARCENTER
Rue des Anciens Combattants 1
5032 MAZY
Tel: 32-(0)81738087 - Fax: 32-(0)81738075
Email: [email protected] - Web: www.sbgcarcenter.com
Contact person: Mr Eric CHARLIER
Situated between Namur and Gembloux and strong of an experience of more than ten
years, the SPRL BEAURAING specialized in the equipment of vehicles in the LPG and
also in the adaptation of vehicles for people with reduced mobility.
Our know-how and our experience in the field of the LPG make of the SPRL BEAURAING
the only center of assembly in province of Namur approved by the car manufacturers.
We also propose you a vast choice of adaptations of vehicles for people with reduced
mobility:



Systems of driving of the last generation
Numerous systems of help to the transfer and to the load
But also adaptations for the collective transport.
Back to homepage
BELGIAN FIBERS MANUFACTURING
Boulevard Industriel 91
7700 MOUSCRON
Tel: 32-(0)56856800 – Fax: 32-(0)56344276
Email: [email protected] - Web: www.belgianfibers.be
Contact person: Mr Patrick BUSSCHAERT
BELGIAN FIBERS MANUFACTURING is one of the mayor independent Polyolefin fibre
producers in the world. For 2013 we expect production of about 24 000 tons. Flexibility
and efficiency are essential to meet the needs of our customers. The fully equipped
laboratory monitors the quality of our products. For a greater customer confidence
BELGIAN FIBERS MANUFACTURING produces and sells under the ISO-9001.
Automotive
The polypropylene fibers are extruded to the specifications of the customer. Our fibers
are incorporated in parts built-in into the major automobile models. Such as:







Audi
BMW
Mercedes
PSA Group
Seat
Skoda
Volkswagen
Through close cooperation with R&D departments of our customers we developed
shrink-free fiber, heat stabilized fiber, mixed cut lengths for ideal processing, use of
different spin finish, etc.
Back to homepage
BELGIUM TRUCK TECHNOLOGY
Rue des Eperviers 1
4040 HERSTAL
Tel: 32-(0)042636081 – Fax: 32-(0)42637728
Email: [email protected] - Web: www.belgiumtt.com
Contact person: Mr Benjamin JOHNSON
BELGIUM TRUCK TECHNOLOGY is one of the major and most experienced independent
brake caliper remanufacturer in Europe. Every member of our team has unique expertise
acquired over years of experience.
Quality, flexibility and service are our leitmotivs. Our highly skilled team is everyday
available to answer any technical, logistical or commercial questions you may have. With
production offices, we have clear visibility on workshop production and are able to
inform about delivery time in real time.
BELGIUM TRUCK TECHNOLOGY today sells to more than 45 countries and every day
explores new remanufacturing possibilities and repair kits for aftermarket.
We stock a massive range of heavy duty Meritor, Knorr-Bremse, Wabco brake calipers
and repair kits which allow us to offer a very competitive same day R/R (repair and
return) service over the whole Benelux and other bordering countries (France, Holland,
Luxemburg, Spain).
Back to homepage
BEVIL
Zoning Industriel - Rue du Mont des Carliers 26
7522 BLANDAIN
Tel: 32-(0)69890770 – Fax: 32-(0)69840639
Email: [email protected] - Web: www.bevil.be
Contact person: Mr Michel DELCROIX
Magi Car
Magi Car understands a wide range of products of maintenance for vehicles:
Shampoo + wax bodies
Universal internal cleaner
Cleaning windscreens and bodies
Back to homepage
BIRAL LUBRICANTS
Rue de l'Echauffourée 1
7700 MOUSCRON
Tel: 32-(0)56333840 – Fax: 32-(0)56333807
Email: [email protected] - Web: www.biral-lubricants.be
Contact person: Mrs Joelle-LEMOINE
The key to our success
RESTORE, engine restorer and lubricant, with
is a revolutionary new engine
treatment. In new and older cars, it restores whatever compression and power are lost
and maintains the engine in top condition for 2 or 3 times its normal life.
Each can of RESTORE contains billions of
micro particles in suspension in a neutral
motor oil of high quality.
Each
microparticle contains Lead (40%) dispersed uniformly throughout a Copper
(60%) matrix with Silver. RESTORE is added to the motor oil but it is not an oil additive
Simply, because an oil additive, by definition, is a product which is added to automotive
oil in the crankcase with the intended purpose of modifying the oil characteristics such
as viscosity, detergency, foaming, etc.
RESTORE is not an oil additive in this sense. It is rather an engine additive because it
acts on the engine itself playing a double role:
The
particles fill scratches, grooves and other worn out areas between the piston
and the cylinder wall in the engine.
The
particles provide maximum natural lubrication due to their percentage of lead.
This, even under very high temperature
The action of RESTORE reduces friction and rebuilds metal surfaces, which restores lost
power and reduces oil & fuel consumption.
It works effectively wherever friction and wear cut scratches in metal surfaces, such as
cylinder walls, cranckshaft and bearings.
Back to homepage
BLICQUY (LES ATELIERS DE)
Rue du Couvent 38
7903 BLICQUY
Tel: 32-(0)69669690 – Fax: 32-(0)69669699
Email: [email protected] - Web: www.adblicquy.be
Contact person: Mr Francis LORENZONETTO
Engineering and electrical sub-contracting, assembly of optical headlights, mechanical
welding (trolleys)
Research and development
Mechanical and electrical assembly, plastics, by machine or manually, metal
construction, mechanical welding and sheet metal work.
Back to homepage
BODAIR
Rue Al'Fosse 7
4681 OUPEYE
Tel: 32-(0)42269128 - Mobile: 32-(0)473450616
Email: [email protected] - Web: www.bodair.com
Contact person: Mr Benoit BOVEROUX
BODAIR is active in the development, the design and the production of carbon fiber rods.
• As a result of the R&D conducted by BODAIR, new technologies in carbon fiber rods are
emerging.
• BODAIR is eager to offer high quality rods and advanced designs allowing significant
weight reduction that largely exceed the current designs & performance of aluminum
and/or stainless steel rods.
• Thanks to the combination of a completely new manufacturing process with a new
carbon fiber design, BODAIR has acquired a unique competitive advantage over
traditional rod technology & design.
Back to homepage
BODY-CONCEPT.BE
Rue de Douvrain 13
7011 GHLIN
Tel: 32-(0)65312280 – Fax: 32-(0)65312406 – Mobile: 32-(0)475284663
Email: [email protected] - Web: http://body-concept.be
Contact person: Mr François BALLEZ
Filling-out of commercial vehicles - Industrial coach building
Coach building model
Brand
Ladder carrier construction
Ballez patent
Home-made
Fitting-out of workshop vehicles
Home-made
Prefabricated furniture
Special vehicles: Librarybus, medical care vehicles, PROCAR
technical vehicles…
Police and intervention vehicles
Repairing trailers and equipment
Tipper and tri-tipper for 3.5 to 32 tons
Home-made
Home-made, CEV
Cabreta
Back to homepage
Avenue de Norvège 6
4960 MALMEDY
Tel: 32-(0)80791550 – Fax: 32-(0)80791569
Email: [email protected] - Web: www.btd.be
Contact person: Mr Ernst BREUER
Realizing engine visions
Modern and innovative engine technology: automobile sector
BREUER TECHNICAL DEVELOPMENT (BTD) is a development partner for single
components, engine subassemblies and alternative powertrains as well as complete,
high-performance and series-production engines. From initial design development and
mechanical construction right through to testing and measurement for the highest
requirements (including motor racing and research projects).
We develop prototypes and components from A to Z, or, if required by the customer, will
provide targeted support in different phases of the development process.
Research & development in the field of gas engines is one of our important area of focus.
As a member of a competence centre, BTD is working intensively on research projects
that contribute to the improvement of natural gas driven engines or the development of
biomass gasification driven engines.
One of the company’s key areas of expertise is the development of complete
turbocharger systems and single components such as turbine or compressor wheels,
turbine scrolls and compressor housings, from single prototypes to low-volume
production. With the state-of-the-art turbocharger balancing equipment, BTD completes
the process of the moving parts of turbochargers. The equipment even allows ballbearing turbochargers and components made of alternative materials to be balanced.
BTD can help to fulfil the highest standards in meeting the rising demand for
turbocharged engines.
Main customers:
Volkswagen AG (Wolfsburg, Germany)
Audi AG (Germany)
Back to homepage
BRITTE MUSTAD
Rue de Cheratte 27
4683 VIVEGNIS (OUPEYE)
Tel: 32-(0)42569069 - Fax: 32-(0)42640863
Email: [email protected] - Web: www.britte.be / www.mustad.be
Contact person: Mr Giovanni SANNA
Multi-technologies for multiple applications
Assembly, Automation, Engineering, Interconnection technologies, Machining,
Measuring instruments, Metrology, Microelectronic packaging, Nanotechnologies,
Plastics technology, Processing, Stamping, Tools, Turning…
... For markets with high technological value
Aeronautics - space, Automotive, Biomedical - Medical, Data-Processing,
Electromechanical, Equipment, Luxury goods, Microelectronics, Nuclear industry,
Railway, Telecommunications
MUSTAD, precision screw-cutting and machining since 1948
MUSTAD BELGIUM belongs to the mechanical division of family group MUSTAD
INTERNATIONAL GROUP founded in Norway in 1832.
Rather than concerns linked to short-term share price and profit targets, the main goal of
our company, which is not a quoted company, is to ensure its continuity in time:



Through solid growth based on real technological know-how at the service of quality
and productivity.
Through reasonable long-term profit targets.
By positioning itself as a veritable partner for its customers by providing expertise
over nearly sixty years of machining existence.
Mission
To machine precision mechanical components and assemblies for the whole of the
industrial sector and in all materials providing high added value in terms of technology,
competitiveness of price and service. Screw-cutting and machining on CNC production
centres constitute our basic tasks.
Back to homepage
BUREAU CONSEILS ET SERVICES BCS
Rue Folle France 8
1325 CHAUMONT-GISTOUX
Tel: 32-(0)10687290 - Fax: 32-(0)10687299
Email: [email protected] - Web: http://aqmanager.com
Contact person: Mr Jean-Pierre RAVEZ
We are present on the market of the CMMS and the LIMS for more than 20 years.
Our teams of engineers possess a big knowledge of the ground, as well as an excellent
expertise of the problems of the business world. This peculiarity makes our strength,
because she allows us to propose software always friendly and particularly adapted to
the needs of our thousand users.
We are a family company possessing an unchanged shareholding for more than 20 years.
This stability allows a big coherence, as well as continuity in the development of our
activity and our products.
We know profitability and a positive growth of our activity for several years. This
profitability allows us to invest permanently in the development of innovative solutions,
such our application Web AQ manager full house.
Back to homepage
CAMPUS AUTOMOBILE SPA-FRANCORCHAMPS
Route du Circuit 60
4970 STAVELOT
Tel: 32-(0)87213094 - Fax: 32-(0)87479061 – Mobile: 32-(0)496995901
Email: [email protected] - Web: www.formation-campusautomobile.be
Contact person: Mrs Cendrine MARCHAL
Launched in 2001, the Campus of Spa-Francorchamps is a non-profit organization, based
in the famous racetrack of Spa-Francorchamps since 2004. The Campus is a key player
in the development of the region through training mainly in the automotive field but also
in industrial and eco-technological topics. Over the year, the Campus has established a
fruitful network of regional, national and international partners.
The Campus is a training center dedicated to automotive mechanical sector for a wide
range of target groups as jobseekers, workers and schools (teachers and students). Our
training covers a diversified panel from technician in basic automotive mechanics to a
post-master in sustainable automotive engineering.
Back to homepage
CANDICAR EUROPE
Parc Industriel 14
5640 METTET
Tel: 32-(0)71726097 - Fax: 32-(0)71726096
Email: [email protected] - Web: www.candicar.be
Contact person: Mr Daniel NICOLETTI
Products of cleaning and automobile maintenance
Deodorizing car
Grease remover metallic parts
Back to homepage
CAPAUL
Industriestrasse 39
4700 EUPEN
Tel: 32-(0)87595560 - Fax: 32-(0)87740468
Email: [email protected] - Website: www.capaul.be
Contact person: Mr Ludwig HENKES
For more than 140 years CAPAUL has been perfecting faultless machining of mechanical
components for aeronautics, medicine, the textile industry, the car industry, the
railways, the petrochemical industry, the manufacture of compressors and of armatures
and in many other fields.
Our high technology production plants turn, mill, grind, erode and control your pieces
according to specifications (CAD systems, plant with total CNC, air-conditioned
measurement compartment).
In order to provide the full service to our customers, we also offer the complete
integration of mechanical subassemblies (study, welding, machining, assembly and
control).
CAPAUL technicians closely collaborate with our customers’ design offices. This
interactive development enables us to offer our customers our know-how and industrial
advice with a view to obtaining a perfect product under the best terms as regards
quality, service and price.
The required quality is verified and certified by a highly qualified team. Our production is
monitored in accordance with the ISO 9001/2000 + EN 9100/2003 norm.
CAPAUL places its experience, its perfect mastery of a range of techniques and its
human potential at the service of its customers.
Back to homepage
CARACTERE AUTOMOBILE
Parc Artisanal - Allée de Wésomont 3
4190 WERBOMONT
Tel: 32-(0)86430000 – Fax: 32-(0)86430001
Email: [email protected] - Web: www.caractere.com
Contact person: Mr Alain HURARD
CARACTERE AUTOMOBILE is a Belgian company specialized in the design of car
accessories for Volkswagen and Audi vehicles.
The line of products offered by CARACTERE for these brands ranges from body styling
kits and wheel rims to sport exhausts, power add-on units and interior styling
accessories.
Alain HURARD, the founder of the company and a designer by training, has been
developing and marketing the products in the ‘Caractère’ range, with the help of his
dynamic team, since 1992, with the aim of blending performance, quality and design.
Today, CARACTERE is one of the world’s best known car customisation companies.
Back to homepage
CARAT DUCHATELET
Rue Winston Churchill 413
4020 LIEGE
Tel: 32-(0)43495562 – Fax: 32-(0)43495575 – Mobile: 32-(0)495500870
Email: [email protected] - [email protected]
Web: www.caratsecurity.com
Contact person: Mr Jean-Paul ROSETTE
The Carat Security Group, including our world renowned brands CARAT DUCHATELET
and Centigon, represents over 130 years of luxury coach building experience and
comprehensive mobile armored solutions for Heads of State, Cash-in-Transit, Off-road
and Defense applications, delivered around the globe from each of our seven production
facilities.
CARAT DUCHATELET is a world leader in head of state and exclusive VIP armored
limousines, buses and SUVs including solutions based on Rolls Royce, Bentley, Maybach
and Mercedes Benz.
Centigon features world class, independently certified sedans, SUVs and cash in transit
vehicles designed for superior ballistic and blast protection both on and off road.
Carat Defense, a leader in nimble, well-protected defensive platforms for border
protection, riot control and reconnaissance missions worldwide including tactical and
pursuit vehicles
Back to homepage
CARLOR ENGINEERING
Avenue Albert 1er 87
4030 GRIVEGNEE
Tel: 32-(0)43840197 – Fax: 32-(0)43671666
Email: [email protected] - Web: www.carlor.com
Contact person: Mr Fabian KLAURENS
CARLOR: the leader in the field of preheating systems!
CARLOR ENGINEERING is a Belgian manufacturer of:
-
Electric coolant heaters for all types of water-cooled engines
•
•
•
•
-
Hydraulic oil preheater
•
•
-
private cars, emergency vehicles, vehicles on construction site
vans, trucks, bus, civil engineering machineries
marine engine
generator sets
tanks
engines
Water preheating system
•
drinking bowls
Back to homepage
CELEAH GROUP
Rue de Beclines 19
1435 MONT SAINT GUIBERT
Tel: 32-(0)10650628 - Fax: 32-(0)10656188
Email: [email protected] – Web: www.celeahgroup.be
Contact person: Mr Eddy LENART
CELEAH GROUP was born from a combination of two companies: Mechanical
Engineering and Meca-Consult.
The one involved in the design of tools, special machine, control...
The other in the machine tool programming, operating range, training...
The products we offer are innovative. Complex trajectory programming, machining,
robotics, High Tech CAD software by direct modeling...
They are part of the evolution of machining today. Machines with many opportunities
while ensuring a limited budget.
Back to homepage
CERSA
Rue du Mont Gallois 54
7700 LUINGNE
Tel: 32-(0)56842100 - Fax: 32-(0)56345868
Email: [email protected] – Web: www.cersa.be
Contact person: Mr Freddy VANMEENEN
Created in 1990, CERSA concentrates on innovation and improvement of floor mounted
and overhead handling systems in collaboration with car manufacturers. Each conveyor
system presents specific characteristics of speed, load, noise, lubrication,
environment… The application of polymeric to conveying procures significant
advantages. CERSA developments give solutions to conveyors and especially in specific
environment such as car bodies’ treatment, cataphoresis, water-test, waxline…
CERSA components have for main objectives:
To reduce:
The noise level
Systems weight
Maintenance costs
Or avoid lubrication
Systems wear
Investment costs
From conception to production, CERSA is able to help you to manage your projects. Our
job is to respond to your objectives and needs with the most suitable solution.
Back to homepage
CETEOR
Zone Industrielle - Rue de la Baronnerie 3
4920 HARZE
Tel: 32-(0)43882017 - Fax: 32-(0)43883192
Email: [email protected] – Web: www.ceteor.com
Contact person: Mrs Estelle DONY
Jump starters for all sectors
CETEOR battery booster packs are professional jump starters for the recovery of all
types of breakdown vehicles with a partially or completely flat battery.
Our comprehensive range of battery boosters will allow you to make every 6, 12, 24 or
28V, explosion or hybrid motor start. No matter if you face a battery breakdown on a car,
truck, boat, construction equipment, industrial generator, tractor or aircraft; you will
always find a CETEOR jump starter filling up your needs.
CETEOR'S professional battery boosters are designed to provide breakdown assistance
for cars, 4x4s, utility vehicles, mini vans, vans, etc. with a flat battery – petrol or diesel.
Back to homepage
CISSOID
Axis Parc Business Centre Rue Emile Francqui 3 Bat. C
1435 MONT-SAINT-GUIBERT
Tel: 32-(0)10489210 - Fax: 32-(0)10889875
Email: [email protected] – Web: www.cissoid.com
Contact person: Mr Tony DENAYER
CISSOID is the leader in high temperature semiconductor solutions, delivering standard
products and custom solutions for power management, power conversion and signal
conditioning in extreme temperature and harsh environments. CISSOID provides high
reliability products guaranteed from -55°C to +225°C and commonly used outside that
range, from cryogenic lows to upper extremes.
Whether the ambient temperature is low but the power dissipation heats up the chips, or
in high temperature environments, CISSOID products enable energy, weight and cost
savings in lighter, cooling-free and more compact electronic systems. They are used in
mission-critical systems as well as in applications requiring long term reliability. CISSOID
supplies leaders in the Oil & Gas, Aeronautics, Industrial and Automotive markets.
Back to homepage
CO-JOINT
Rue Côte d’Or 279
4000 LIEGE
Tel: 32-(0)42521741 - Fax: 32-(0)42521402
Email: [email protected] - Web: www.cojoint.com
Contact person: Mr Thierry KEUTER
Specialised in the cutting and manufacturing of gaskets from soft materials like rubber,
asbestos substitutes, felt, paper, cardboard, cork, industrial plastic and soft metals. Orings, V-rings, hydraulic gaskets according to many standards
Sales of rope, braid and sealing for pump and valve
Active in the distribution of gear shafts and supports, bearings, driving belts, pulley and
chain, elastic coupling
Delivery of tool kits and equipment, glue and grease
Back to homepage
DASCOTTE
Rue de la Maîtrise 3
1400 NIVELLES
Tel: 32-(0)67442454 - Fax: 32-(0)67333362 - Mobile: 32-(0)498572210
Email: [email protected] - Web: www.groupegmm.com
Contact person: Mr Pascal WASTERLAIN
One of the latest remarkable acquisitions of the Group is DASCOTTE, located in Nivelles,
the nerve center of Brabant Wallon.
This workshop of fine machinery perfectly complements the activities of ATVE in
Charleroi while keeping its technical and commercial specificity.
With its own unique identity, on a human scale and fool proof dynamism, DASCOTTE
obtained ISO 9001 certification in 2008 and 2011 and with a view to investing in other
areas in light of its expertise and its policy strongly oriented towards total quality.
Back to homepage
DECOLTAFRAMO
Rue Lumsonry 16
5651 TARCIENNE
Phone: 32-(0)71228884 - Fax: 32-(0)71228666
Email: [email protected] - Web: www.decoltaframo.com
Contact person: Mr Gilles MONNOYER
DAYCO SASIC is your partner, satisfying a wide range of industrial needs combining a
multiplicity of technologies.
From bumper to spoiler of your vehicles, find our components in the gearboxes, motors,
openings and closings, seats …
Back to homepage
DEKNUDT AUTOPARTS
Zone Industrielle de l'Europe 12
7900 LEUZE-EN-HAINAUT
Tel: 32-(0)69669602 - Fax: 32-(0)69669601
Email: [email protected] - Web: www.autodeknudt.be
Contact person: Mr Pierre DEKNUDT
DEKNUDT SA... So that reusing parts can help you with your budget
Where do the vehicle parts we offer come from?
From insurance companies
We work with insurance companies and this means that every day automobile expert
appraisal send us offers to bid for vehicles stored all over Belgium. Our company bids for
as many of the vehicles as we are able to see. At the end of the bidding process, by
agreement with the owner, the dealer who offers the most can acquire the vehicle he has
bid for.
We ourselves handle the daily collection of our vehicles, within a maximum of one week
after the close of bidding.
From private individuals
When the insurance companies decide not to pay out on their claims, private individuals
contact our company to sell their written-off vehicles.
What can these vehicles be used for?
Most of our vehicles are sold to professionals working in the motor industry, such as
dealers, bodywork firms, etc. but we do not overlook private individuals who can
sometimes pick up a bargain by buying a written-off vehicle (those of them who have the
souls – and hands! – of mechanics).
We obviously sell all over Belgium but also across Europe (France, Italy, Greece, Finland,
etc.) and we even export to Poland, Lithuania, the Czech Republic, etc.
DEKNUDT SA... Two divisions – two departments
Cleaned-up wrecks
Spare parts
Back to homepage
DELADRIERE ETS
Rue des Mineurs 192
7390 QUAREGNON
Tel: 32-(0)65672048 - Fax: 32-(0)65679925
Email: [email protected] - Web: www.deladriere.com
Contact person: Mr Claude DELADRIERE
DELADRIERE: a century-old business that knows how to keep up with the times by
staying close to its clients.
DELADRIERE has always sought to make continuous progress and improvements, never
resting on its laurels.
Over the last hundred years, three generations of the company have had to rise to
numerous challenges, such as surviving three global economic crises and the demise of
their main client, the coal-mining industry.
Now DELADRIERE has expanded into many other sectors: cement, aerospace, maritime,
glass, chemicals, automobiles and metallurgy.
Our driving force: challenge and complexity
From the matrix for aero plane tyre retreading, to fitting rain sensors on windscreens, to
tools for headlight control, our firm has produced many specific pieces of equipment for
each of these products. Our outstanding level of expertise has enabled us to extend our
range of services to the manufacture of complex, automated machinery.
Production of complex machines for applying glue to windscreen frames
Rain sensor stand
Back to homepage
DELAUNOIT GROUP
Rue du Berlaimont 35
6220 FLEURUS
Tel: 32-(0)71309060 - Fax: 32-(0)71320484 – Mobile: 32-(0)493793208
Email: [email protected] – Web: www.delaunoit.com
Contact person: Mr Jacques DELAUNOIT
At the service of industry since 1921 in the petrochemical, chemical, steelmaking,
automobile and printing sectors, nuclear and conventional power stations, and all
general contracting for metal construction and assembly
•
•
•
•
•
•
Distribution centre for lifting products: hoists, winches, lifting jacks,
outrigger cranes, straps, slings, steel cables, chains.
Approved and reputable general metal construction contractor.
Working in the field of design, construction, assembly and after-sales
service of lifting equipment such as: Travelling cranes, davit arms,
monorails, lifting beams, gantries, roller conveyors, special lifting
equipment.
Repair, transformation and acceptance workshop for the approval of
products by official organisations, a quality service that complies with EC
standards,
General, mechanical, hydraulic, pneumatic and electrical maintenance.
24h/24h breakdown service for all lifting machinery.
Official dealer for products from KULI, HADEF and ACI for BENELUX
A dynamic team at your service for the servicing, repair, modernisation or construction
of travelling cranes, hoists, gantries, monorails, davits, etc.
Back to homepage
DELTRIAN INTERNATIONAL
Zone Industrielle de Martinrou - Rue du Berlaimont 21 A
6220 FLEURUS
Phone: 32-(0)71364030 - Fax: 32-(0)71438448
Email: [email protected] - Web: www.deltrian.com
Contact person: Mr Jürgen ALEXIUS
As a specialist OEM air filter manufacturer, DELTRIAN has developed 22 years ago Total
Filtration Management.
Providing clean air to automotive customers in Europe, Africa and Russia, DELTRIAN has
succeeded to reduce energy costs and improve process quality output. From our R&D
laboratory in Belgium, DELTRIAN continuous to develop low energy consuming high
efficiency filters adapted to specific automotive process.
With intensive analysis of process, maintenance and cleaning our Dirt in Paint experts
implement “low hanging fruit” recommendations to improve first run and reduce
polishing and rework.
Back to homepage
DIMMA DESIGN
Avenue de l'Indépendance 41
4020 WANDRE
Tel: 32-(0)43621062 – Fax: 32(0)43622801
Email: [email protected] - Web: www.dimmadesign.com
Contact person: Mr Baudouin MICHEL
DIMMA’s main activity is car repairing. Each year, more than 800 vehicles come to the
repair shop. Many companies such as, Interleasing, Firemen vehicles of Liège entrust
DIMMA with their damaged cars. Customers’ faithfulness gives a clear indication of the
serious character and the quality of DIMMA’s services.
Moreover, DIMMA is approved by most of the insurance companies such as: AG, AGF,
AXA, SMAP and ZURICH.
Body kits DIMMA Concept
DIMMA manufactures coachwork kits under the name of DIMMA Design for cars such as
Peugeot, Citroen and Renault. For the making of these kits, DIMMA uses two materials:
polyester and sheet metal.
If DIMMA sublets the pressing of sheet metal, every polyester pieces are manufactured
by DIMMA itself. Not a single machine is used in this step of manufacturing. Most of the
DIMMA’s design kits are manufactured with polyester, a mixing of fiberglass and resin.
That material is breakable but also repairable.
The DIMMA Design 306 Maxi kit is the one that gives the best transformation quality. Its
widened wings are, in fact, made of steel which gives a good painting quality and a better
inflexibility. Unfortunately, the setting is a bit longer and the heavy wings, made of steel,
appreciably reduce the car performances.
When DIMMA became well-known thanks to its large kit it decided to extend its range of
products. Moreover, the company realised that the demand for coachwork kits was
increasing constantly. These products are manufactured thanks to new technologies
such as PURIM.
Back to homepage
DRADIN V. & FILS
Chaussée de Waremme 162
4500 HUY
Tel: 32-(0)85211478 - Fax: 32-(0)85211403
Email: [email protected] - Web: www.dradin.com
Contact person: Mr Serge DRADIN
Our family business has been active for over 40 years.
DRADIN is located in Huy, close to major highways and not far from Bierset airport.
We produce articles made of aluminium and their finishes.
Our expertise also allows us to cast anodizable aluminium alloys (Al-Mg).
Back to homepage
DSI DELTA SERVICES INDUSTRIELS
Rue du Mont d'Orcq 3
7503 FROYENNES
Tel: 32-(0)69640604 – Fax: 32-(0)69780079 – Mobile: 32-(0)479765796
Email: [email protected] - Web: www.deltabeam.net
Contact person: Mr Till SCHAEFER
Located in Belgium, DSI provides custom radio-tracing services and equipment intended
for optimizing internal combustion engines and lubricants, such as permanent
measurement of wear of engine parts, oil consumption and its impact on emissions,
measuring oil dilution and the rate of aeration of lubricants, etc.
DSI has a testing and inspection centre for mechanical parts and lubricants. Our
services are intended for the engineering industry: automotive, heavy goods, aircraft
industry, etc.
DSI is involved as an R&D partner or sub-contractor in the context of developing
lubricants and new engineering solutions, in particular with a view to adapting engines to
new environmental standards.
Main customers:
Services offered by DSI: hire and sale of measuring equipment, custom measuring
services including on-site, measuring services on internal testing equipment (test
benches for engines and lubricants), R&D partnerships.
Renault SAS (France), Renault F1 Team (France and United Kingdom); Total France,
PSA-Peugeot S.A., Volvo Trucks, I.F.P. (French Oil Institute), Le Moteur Moderne (A.V.L.),
Sodemo Racing, Case New Holland, Federal Mogul (France), E.D.F. (Electricité de
France), C.E.A. (Atomic Energy Commission), Ricardo Consulting Engineers (United
Kingdom), BP Castrol (United Kingdom), Cosworth (United Kingdom), Bentley (United
Kingdom), Prodrive-Tickford (United Kingdom), Land Rover/Jaguar (United Kingdom),
M.I.T. (United States), Magna (United States), GM (United States), SK Corp (South
Korea), Maruti-Suzuki Group (India), etc.
Back to homepage
D-TECH ELECTRONIC
Rue Jean Jaurès 176
4430 ANS
Tel: 32-(0)43720716 – Fax: 32-(0)43720719
Email: [email protected] - Web: www.domestia.be
Contact person: Mr Dany TOUSSAINT
D-TECH develops solutions for its own brand, Domestia, in the home automation sector.
In addition, we develop custom solutions for different customers in the following sectors:
automotive, bread slicing machines, advertising hoardings, complex heating regulation
and a host of other sectors.
D-TECH Electronic designs turnkey projects in the fields of printed circuit boards, the
production of embedded software as well as management software running on PCs.
Main customer:
Car industry: Carat-Duchatelet
Back to homepage
DYNATEK
Ruthier 1
4950 FAYMONVILLE
Tel: 32-(0)80672163 – Fax: 32-(0)80678604 – Mobile: 32-(0)475835110
Email: [email protected] - Web: www.dynatek-technologies.com
Contact person: Mr Bernard WATY
Sale of IT files for vehicles
Company of automobile mechanics specialized in:



The reprogramming of electronic cases for cars;
The preparation of engines for competition cars;
Equipment’s for the new technologies of biofuel (R&D for decrease of
consumption).
Back to homepage
ECO-DEC
Rue de Maestricht 84
4607 BERNEAU
Tel: 32-(0)43793585 – Fax: 32-(0)43795519
Email: [email protected] - Web: www.eco-dec.be
Contact person: Mr Eugène DECKERS
ECO-DEC has been working in the solvent waste-processing sector for 25 years.
We have developed a new distillation system, which produces a purer solvent ready for
reuse in many applications. The system is suitable for a wide range of solvents such as
trichloroethylene, aromatic solvents, perchloroethylene and chlorous solvents.
The new system uses a heating element sandwiched in an aluminium plate and placed at
the bottom of the recycler. This allows an efficient and even transfer of heat to the
solvent throughout the distillation process. The ECO-DEC recycler is capable of
recycling all solvents within a mix in one cycle. The ECO-DEC recyclers are water-cooled
and virtually maintenance free!
As well as the advantages above, recycling your solvent waste cuts out the need to store
waste which has associated risks and also the cost of waste removal.
Back to homepage
ECOPLAST TECHNOLOGY
Rue Louis Blériot 37
6041 CHARLEROI
Tel: 32-(0)71560020 - Fax: 32-(0)71560290 - Mobile: 32-(0)476900550
Email: [email protected] - Web: www.ecoplast-technology.eu
Contact person: Mr Bernard GONSETTE
A technological step ahead in the world of plastics
Inventor of the ECOPLAST system and world leader, ECOPLAST TECHNOLOGY provides
clients with a service range unique in Europe.
From study to mass production, through design and development phases, the entire
process is supported from A to Z by the same entity.
More than 10 years of expertise and continuously updated state-of-the-art technology are
our assets to develop products at a lower cost in all sectors.
Back to homepage
ELCOMETER
Rue de la Vallée 13
4681 HERMALLE-SOUS-ARGENTEAU
Tel: 32-(0)43799610 - Fax: 32-(0)43740603
Email: [email protected] - Web: www.elcometer.com
Contact person: Mr Frédéric TALBOT
For more than sixty years ELCOMETER has been a world leader in the design,
manufacture and supply of inspection equipment to the coatings industry.
Ever since the first ELCOMETER gauge was manufactured in 1947, our philosophy has
been to provide ‘best in class’ design, quality and service at a competitive price. By
concentrating on these core values, ELCOMETER has grown into a global network with
representation in over 70 countries.
With a range of products specifically developed to meet the needs of the coatings
industry, ELCOMETER is well positioned to provide you the solution to your inspection
requirements - whatever and wherever they might be.
Back to homepage
ELOY & BECKER
Boulevard d'Avroy 292
4000 LIEGE
Tel: 32-(0)42249690 - Fax: 32-(0)43719326
Email: [email protected] - Web: www.eloybecker.com
Contact person: Mr David ELOY
Sales Engineering and Global Sourcing
Sales Engineering
We represent our Asian partner producers to major accounts all over Europe offering
low cost products that meet the highest quality requirements. Via our offices in Asia and
Europe, we are responsible for sales promotion, monitoring development and technical
support, as well as for production and logistics arrangements for supplying subassemblies that are used in the assembly of vehicle equipment and vehicles the world
over: switches, magnetic sensors, electric actuators, control units...
Global Sourcing
For particular products not in our current range, we work as purchasing consultants and
analyze the Asian markets in order to identify the best suppliers in the low cost countries
that meet our customers’ specifications.
We are involved at all stages of the product life-cycle, from design to production. By
relying on our basic expertise and experience of existing products, we provide custom
solutions tailored to our customers’ specific technical and operational demands. We are
considered as integrators, exercising all the skills required to develop and manufacture
an operational mechatronic system.
Our approach to Global Sourcing comprises four stages:
1. Product analysis:
• Material analysis and identification of the potential of sourcing from a low cost country.
• Analysis of the supply chain and potential savings.
• Definition of a specification in agreement with the customer.
2. Market analysis:
• Analysis of the market and supplier pre-selection.
• RFQ based on customers’ specifications and objectives.
• Audit of preselected suppliers: quality, technology, finances.
• Comparison and summary of the best suppliers (incl. company profiles).
3. Execution:
• Visit to and audit of suppliers chosen with the customer.
• Negotiations with the supplier.
• Start-up of development and industrialization.
4. Project management:
• Communication link between the customer and supplier if necessary.
• Technical support during development or change of product specification.
• Start-up of production and permanent quality control
• Full logistics services including warehousing and just in time delivery.
Main customers:
PSA, VW/Audi, Porsche, TRW, Plastic Omnium, Continental Automotive Systems, MGI
Coutier, Trelleborg
Back to homepage
ELPRINTA
Rue des Bengalis 5
7700 MOUSCRON
Tel: 32-(0)56856545 - Fax: 32-(0)56840515
Email: [email protected] - Web: www.elprinta.com
Contact person: Mr Noël KEMEL
Our wide range of products isn’t limited to the traditional printed circuit board like single
sided and double sided pcbs and multilayers.
Pcbs with carbon (polymer) and pcbs on aluminium based substrate (IMS) are part of our
product range.
In our production unit in Belgium we produce prototypes, small and medium volume
series. Furthermore we also offer bulk series in close cooperation with a foreign partner,
meeting our quality standards. This company has been audited by our specialists.
The strict quality demands of our customers, from whom a large part in the Automotive
Industry, assure the continuous high level of quality.
The continuous training of all our employees and a quality driven management system
make sure your pcbs are in good hands.
As a dynamic company ELPRINTA has been a leader in the production of pcbs since
1980. Thanks to the quality, the reliability and support we are trusted by customers
worldwide in a variety of sectors.
Back to homepage
EMBEDDED CAFÉ INTEGRATION SERVICES ECIS
Rue Jean Burgers 2
7850 ENGHIEN
Tel: 32-(0)23981817 - Mobile: 32-(0)496231671
Email: [email protected] - Web: www.ec-is.be
Contact person: Mr Tycho VERBELEN
EC SYSINT is a specialist in applying metrics and technology in critical operational
environments. With a heritage in the area of geodetic reference systems and remote
sensing technologies it’s our ambition to contribute to society and the success of our
clients. These clients primarily come from the high-tech segment, industry and the public
sector (transport& Logistics, infrastructure, Rail, automotive, aviation & aerospace
industry, Sports& Events). Our added value is most effectively utilised by companies for
which the environment, operational reliability, optimizing business processes and
innovation are essential (key focus points).
It’s our ambition to help business to seriously reduce their operational costs or
optimizing their business processes. We consider it our duty – where there are threats of
serious irreversible damage that may increase the level of risk to people or society – to
explore the availability and feasibility of technical alternatives.










Independent, system integrator
Own hardware and Software development so complete end-to end solutions
International operating
Monitoring the latest international trends of new technology
Total solution company with products and a project-organization
Flexible and fast anticipating
Custom to deal with Governmental Organizations
Working on long term relationships with our customers (no hit and run policies)
Acting like producer and / or assembly for the end user
24/7 support organization with OTRS and ITIL standard
Back to homepage
EURO-LOCKS
Rue de la Fontaine 8
6600 BASTOGNE
Tel: 32-(0)61212261 – Fax: 32-(0)61212265
Email: [email protected] - Web: www.euro-locks.be
Contact persons: Mr Stephan WILMOTTE
LOWE AND FLETCHER/EURO-LOCKS GROUP is one of the largest lock manufacturers and
lock suppliers with factories in UK, Belgium, France, Germany, Poland, USA and China. We
specialise in the design and manufacture of a wide range of locking systems for industry. We
are part of an international group, supplying more than 50 million products each year.
Alongside the production of our traditional locks and locking component range, we
specialise in co-operative customer projects, designed to meet the needs of our customers
across a broad range of markets in the UK, Europe and Worldwide. Established in 1889, we
are still a privately owned and controlled group, which gives us a strong family ethos and a
long term commitment to our business and our customers.
We manufacture our products in six factories and supply globally under the banner LOWE &
FLETCHER in UK and under the name EURO-LOCKS outside UK.
Our locks are used in numerous accessories for automotive applications such as: racks for
ski and bicycle, roof boxes, locking tow bars, petrol and ADBLUE filler caps, etc.
We produce locks and handles that are used in: industrial and earthmoving machines,
electrical enclosures, lockers, steel and wood furniture for office and factory, letter boxes,
parcel boxes, fitness centers, etc.
Back to homepage
Industriestrasse 28 B
4700 EUPEN
Tel: 32-(0)87561008 – Fax: 32-(0)87561009
Email: [email protected] - Web: www.eutomation.be
Contact person: Mr Philippe BREUER
EUTOMATION & SCANSYS provides innovative solutions in the following sectors:
assembly, robotics, computer integrated materials handling, vibrating feeders, the
production of prototypes, dynamic test beds, special test beds, measuring equipment
and automated control systems, data acquisition and processing, modernizing testing
equipment.
Main customers:
Bosch, Daimler, Tenneco Automotive, Delphi, Jtekt, Punch Powertrain
Suppliers of the automotive industry
Back to homepage
EUTRONIX
Avenue Zénobe Gramme 29
1300 WAVRE
Tel: 32-(0)10394900 – Fax: 32-(0)10394901
Email: [email protected] - Web: www.eutronix.com
Contact person: Mr Denis VERSTRAETEN
EUTRONIX is a company active in the ICT sector since 1991 and specialized in the
distribution and service of electronics solutions for automation of different sectors such
as point of sales, logistics, access control, industry, public transport, payment systems
and fire signalling. We work with a network of specialized resellers and are present in
Benelux and France.
Back to homepage
EXPRESSION
Parc Artisanal - Allée des Sorbiers 1
4190 WERBOMONT
Tel: 32-(0)86345620 - Fax: 32-(0)86345630 - Mobile: 32-(0)475785938
Email: [email protected] - Web: www.expression.be
Contact person: Mr Daniel KNUBBEN
Tuning for Mercedes-Benz cars
EXPRESSION S.A. is in no way affiliated with Daimler Chrysler or Mercedes Benz AG.
"Mercedes", "Mercedes-Benz", the three points star and various model numbers are
register trademarks of Daimler Chrysler.
These terms are used for identification purposes only.
Back to homepage
E-XSTREAM ENGINEERING
Rue du Bosquet 7
1348 LOUVAIN-LA-NEUVE
Tel: 32-(0)10866425 – Fax: 32-(0)10840767
Email: [email protected] - Web: www.e-xstream.com
Contact person: Mr Roger ASSAKER
E-XSTREAM ENGINEERING offers the automotive industry the technology and industry
expertise they need to reduce the cost and time needed to develop innovative and higher
quality products.
Digimat is used across the automotive industry as a predictive software platform aimed
at modeling the behavior of reinforced plastics parts, rubber parts, thermoplastic,
elastomer parts and composite sandwich structures.
OEMs and 1st Tier Suppliers use Digimat to CAE interfaces to model the behavior of
reinforced plastics used in exterior, interior and under the hood parts as a function of the
local fiber orientation induced by the injection molding of the part.
Digimat is strongly coupled to:


major nonlinear FEA software (Nastran, Marc, Abaqus, ANSYS, LS-DYNA, PAMCRASH and SAMCEF)
Injection molding software (Moldflow, SigmaSoft, Moldex3, REM3D)
Automotive customers use Digimat to:




choose the optimal material mix
design with confidence
reduce weight - thus meeting CO2 & CAFE regulations
save time & money
Targeted Materials & Applications


Short fiber Reinforced Plastics: Tail gate, Air intake manifold, Clutch pedals, Pan
Oil, etc.
Long fiber Reinforced Plastic: Engine mount, Technical front end carrier, etc.


Continuous fiber (UD-, woven-, braided composites, etc.): Body-in-white
structures, Shock absorbers, Vessels, etc.
Rubber (Fluid transfer hoses, Anti-vibration systems, Truck tires, etc.)
Targeted Performances










Shape stability (part warpage induced by temperature variation)
Structural stiffness
Vibration frequencies and modes (NVH)
Fatigue under cyclic loading
Failure under quasi-static loading
Failure under crash loading
Progressive failure
Long term behavior (stress relaxation and creep)
Weight reduction
Etc.
Further information and case studies at http://www.e-Xstream.com !
Back to homepage
FABRIRESSORT
Avenue Lavoisier 35
1300 WAVRE
Tel: 32-(0)10229800 – Fax: 32-(0)10229898
Email: [email protected] - Web: www.fabriressort.com
Contact person: Mr Eric BECKERS
Since 1930, FABRIRESSORT designs, models and produces all types of springs.
Prototype or million parts: each order is treated with the same love of the trade. Our
workmen are craftsmen trained in the house. They are broken with the secrecies of the
shaping and the production on a large scale.
Autonomy, flexibility, knowledge to make: three qualities which made of FABRIRESSORT
a reliable partner on the market of the spring and the clip.
Back to homepage
FEDERAL - MOGUL
Avenue Champion
6790 AUBANGE
Tel: 32-(0)63382211 - Fax 32-(0)63382279
Email: [email protected] - Web: www.federal-mogul.com
Contact person: Mr Daniel DELATTRE
FEDERAL-MOGUL Corporation is an innovative and diversified $6.9 billion global supplier
of quality products, trusted brands and creative solutions to manufacturers of
automotive, light commercial, heavy-duty and off-highway vehicles, as well as in power
generation, aerospace, marine, rail and industrial. The 45,000 people of FEDERALMOGUL located in 34 countries drive excellence in all they do.
Our globally-networked engineering and technical centers in the U.S., Europe and Asia
enable us to bring to our customers breakthroughs in advanced technology and
innovation.
We are a premier supplier of products, services and solutions to original equipment
manufacturers that use our quality components in their vehicles and automotive systems,
and to aftermarket customers who sell our world renowned brand-name replacement
parts through repair shops and retail outlets. We partner with a global network of
suppliers whose commitment to excellence and on-time delivery is crucial to our
success.
For more than a century, we have developed the innovative products our customers need
to produce the next generation of vehicles. Now, as we write the history of our next 100
years, we continue to build on our position status as a market leader in product and
service solutions to set ever higher standards and continually exceed customer,
shareholder and employee expectations.
Back to homepage
FERONYL
7700 MOUSCRON
Tel: 32-(0)56857530 - Fax 32-(0)56857538
Email: [email protected] - Web: www.feronyl.com
Contact person: Mr Geoffrey DUCROCQ
Company specializing in the injection moulding of technical parts in plastic and
composite materials since 1950
Research and development:
Robotization, automation, new injected technical materials, complex duplicate moulding,
thin-wall injection moulding
Main customers:
Valeo, Volvo, Recare, Delphi, Hydac…
Back to homepage
FILAME BRUSSELS
Zoning Industriel de Nivelles Nord - Avenue Robert Schuman 121
1400 NIVELLES
Tel: 32-(0)67550600 - Fax 32-(0)67550601
Email: [email protected] - Web: www.filame.com
Contact person: Mr Nicolas HODJEFF
Specialised in the fabrication of wire and sheet metal parts, FILAME is your ideal
industrial partner for the production of precision springs and cut, stamped and bended
parts in small, middle or big batches.
From the design through to the manufacturing, not less than our 50 qualified staff
members are at your disposal. Thanks to the quality of the team and machinery, over 500
million parts a year’s leave the FILAME workshops.
On our Swiss, German, Italian and Japanese CNC machines, the control systems
guarantee flawless fabrication. Their flexibility gives unrivalled assembly options and
extraordinary production speeds and allows us to offer highly competitive prices.
Equipped with sophisticated CAD machines, FILAME can design, simulate and fabricate
the most suitable tools for your production runs. The manufactured pieces are stored
and can be delivered to any Europe location within 24 hours.
FILAME is ISO 9001:2000 certified and works with SPC.
Material: our materials relies on proven expertise and an undeniable experience which
guarantees that the selected material suits your needs best: Carbon steel, Inox,
Galvanised, Bezinal, Pet Coated, copper, bronze, aluminium, Nimonic, Inconel, Oteva...
Surface treatments: deburring, polishing, epoxy paintwork, galvanizing, platings (white
or black zinc, nickel, copper, chrome / bi-chrome…) phosphatation, Delta Tone, Delta
Seal, Shot Penning...
Back to homepage
FREE FIELD TECHNOLOGIES FFT
Axis Park Louvain-la-Neuve - Rue Emile Francqui 1
1435 MONT-SAINT-GUIBERT
Tel: 32-(0)10451226 - Fax 32-(0)10454626
Email: [email protected] - Web: www.fft.be
Contact person: Mr Jean-Louis MIGEOT
FREE FIELD TECHNOLOGIES (FFT) develops and supports the Actran family of acoustic
CAE products. The company proudly serves customers as diverse as car manufacturers
and their suppliers, civil and military aircraft and aircraft engine manufacturers,
loudspeakers and other audio device producers, consultants, universities and research
centres.
FFT also provides related services: acoustic CAE consultancy (on-site or off-site),
training, specific developments, contract research and provides a range of services in
the field of acoustic design. Free Field Technologies is also involved in multiple research
programs in acoustics, aero-acoustics, vibro-acoustics, high-performance computing
etc.
FREE FIELD TECHNOLOGIES operates from its Belgian headquarters and from branch
offices in Toulouse (France), Tokyo (Japan) and Troy (Detroit, Michigan).
In September 2011 FFT joined MSC Software Corporation, leading provider in Virtual
Product Development technology, including simulation software and professional
services.
Back to homepage
GALVAMETAUX
Rue Waloppe 19
4540 AMPSIN
Tel: 32-(0)85311326 - Fax 32-(0)85314128
Email: [email protected] - Web: www.galvametaux.com
Contact person: Mr Eric GREGOIRE
GALVAMÉTAUX invests regularly in research and development. It has built up a highly
professional team of specialist engineers and qualified operatives. In order to meet the
demands of its customers, GALVAMETAUX is taking the necessary steps to obtain ISO
certification.
Manifold applications of the hot dip galvanization:





Building trade: footbridges, balustrades, metallic frame, concrete-iron,
decoration …
Urban applications: safety rails, lightposte, iron gates …
Energy: high voltage towers, cables-ladder …
Agriculture and horticulture: greenhouses, iron railing, fences, grain-dryer,
liquid manure barrels …
Transport: railways, motor vehicles.
GALVAMÉTAUX is particularly specialised in small parts above all in fixing devices
such as: rail bolts, screws, nuts, sleeper screws, shackles, roofing hooks, flanges,
clips …
Back to homepage
GAMMA-WOPLA
Rue de la Royenne 78
7700 MOUSCRON
Tel: 32-(0)56852085 - Fax: 32-(0)56845822
Email: [email protected] - Web: www.gammawopla.com
Contact person: Mr Jan VANDEWIELE
Plastic injection molding: a leader in plastic bins and crates
GAMMA WOPLA works as a designer and producer of industrial plastic bins and crates:
pharmaceutical, automotive, logistics and retail.
Plastic crates display unique characteristics:





Advanced technology
They comply with the highest international, sanitary and environmental standards
Ratio quality, price
Produced with high precision moulds on modern machines equipped with Robots
The crates are 100 % recyclable
Back to homepage
GANTREX
Rue du Commerce 19
1400 NIVELLES
Tel: 32-(0)67888030 - Fax: 32-(0)67216321 – Mobile: 32-(0)473933529
Email: [email protected] - [email protected]
Web: www.gantrex.be
Contact person: Mrs Thérèse GRZESKOWIAK
Worldwide Leader
GANTREX® and the Gantry Group are the world’s leader in crane rail fastening solutions.
Operating since 1971, GANTREX® has offices worldwide to meet your needs with local
personnel, regional manufacturing and technical departments in both North America and
Europe. With a staff of over 400, GANTREX® is positioned to provide local solutions based
upon world wide experience and understanding.
In close contact with the market, GANTREX® continuously develops products and
solutions to meet the expanding demands of the industries we serve and has become the
indispensable partner in industrial sectors where crane performance is critical, such as:








Steel and Aluminum Plants
Pulp and Paper
Intermodal & Transportation
Automated Warehouses
Ports and Shipyards
Cement Industry
Automotive
Power Generation & Public Utilities
Back to homepage
GILLET AUTOMOBILES
Rue Saucin 84
5032 ISNES
Tel: 32-(0)81568444 – Fax: 32-(0)81568746
Email: [email protected] – Web: www.gilletvertigo.com
Contact person: Mr Tony GILLET
Conception and construction of automobiles, the VERTIGO, the only sports car of Belgian
manufacturing
Renovation of cars
Activities of Racing
Construction, assembly and trade of motor vehicles
Back to homepage
GLOBAL DESIGN TECHNOLOGY - GDTECH
Rue des Chasseurs Ardennais 7
4031 ANGLEUR
Tel: 32-(0)43678711 – Fax: 32-(0)43766822
Email: [email protected] - Web: www.gdtech.eu
Contact person: Mr Guy JANSSEN
Engineering company, GDTECH offers his expertise to industrial projects spanning
across all necessary stages for Design, Simulation and Industrialisation.
In our own offices or on customer site, as provider of services, project manager or
consultant, in the aeronautical, space, transport, defence and energy industries ...








Design : development phase, dedicated to analysis
Numerical simulation : structures and fluids
Tools design and control of manufacturing
Hydromechanics : certification, development, technical support
Support to Validation : Management, Following and Analysis
Support to In service product : engineering department, production,
after-sales
Support to Production : methods, process cert
Technical documentation
GDTECH has been developing its skills in crash simulation in the transport field since
2005.
The objectives covered by this new focus are many and varied: modelling and
optimization of guardrails and the improvement of vehicle digital models. GDTECH is also
involved in the safety of motorcyclists and vehicle occupants.
Thanks to our knowledge of the most advanced industrial technologies and our
expertise, we provide you with a customized solution.
Our assets... our expertise, our CAE complete offer and our quality commitment (EN9100
certified).
Localisations: Belgium (HQ), France (Pau and Massy)
Main customers
Techspace Aero, Turbomeca, Messier Dowty, Snecma Moteurs, SONACA, SABCA,
Centre Spatial de Liège, FN Herstal, CMI, Renault, Valeo, Caterpillar, Arcelor, IBA…
Back to homepage
GEFCO
Rue du Parc Industriel 27
7822 ATH
Tel: 32-(0)68250250 – Fax: 32-(0)68551576
Email: [email protected] - Web: www.gefco.net
Contact person: Mr Philippe VINCENT
Outbound automotive logistics
Towards multimodal logistics solutions
As a subsidiary of the PSA group, GEFCO has been serving the automotive industry for
60 years. The European leader in automotive logistics, the group has developed
considerable expertise in vehicle distribution. From assembly plants to dealerships,
GEFCO provides reliable, competitive logistics solutions on behalf of distributors. With 4
million vehicles distributed in 2010, GEFCO is positioned as a key logistics provider in
this sector.
A recognised logistics integrator
An expert in automotive logistics, GEFCO designs, optimises and implements logistics
plans from production plants or ports to dealerships. The group offers high added-value
services for all players involved in automotive distribution, including storage, PDI (PreDelivery Inspection), PPO (Post-Production Operations) and vehicle customisation for
dealers.
These logistics solutions include three activities:


Multimodal transport from the factory: logistics engineering, transport plans,
scheduling, supervision, tracking, reporting
Added-value operations at the GEFCO site:
- Vehicle customisation (Post-Production Operations): based on rigorous
specifications, GEFCO carries out added-value operations for car
manufacturers: windscreen engraving, installation of fog lamps, alarm
systems etc.
- Vehicle preparation before distribution to the sales network (Pre-Delivery
Inspection): dynamic testing, removing protective covers, washing,
cleaning, interior preparation, mechanical and electrical tests, final quality
control.

Capillary distribution: from the GEFCO site to the sales outlet, our teams
distribute vehicles to every marketing area and every dealer
Back to homepage
GRANDO
Parc Industriel - Rue du Commerce 14
1400 NIVELLES
Tel: 32-(0)67894848 – Fax: 32-(0)67894845
Email: [email protected] - Web: www.grando.net
Contact person: Mr Yves CHARLIER
GRANDO is a Belgian Company that designs, manufactures and commercialises
technical articles in foam and rubber (elastomers) since 1946. Throughout the years,
GRANDO has attracted a growing number of customers with high-quality products,
competitive prices and very short fabrication time. With their unique experience and
knowledge of cellular materials and elastomers, our engineers guide you towards the
optimum solution in response to your technical issue in a wide range of applications:
GRANDO it's in brief:
More than 300 different cellular materials and elastomers in stock
Tailor-made articles in any size and shape according to your specifications
Tailor-made moulding of rubber articles (with or without metal insert)
Laminating of various materials (foam, rubber, cork, felt, plastic films…)
Thermo compression of cellular materials such as foams of, PE, EVA, PP with or without
laminated textile on one our both sides
Assembly with pressure-sensitive adhesive, contact glue, cold vulcanisation, hot-melt…
High-pressure water-jet cutting of many materials (stainless steel, glass, wood, plastic,
rubber…)
Back to homepage
GREEN PROPULSION
Liège Science Park - Avenue Pré-Aily 20
4031 LIEGE
Tel: 32-(0)42397040 - Fax: 32-(0)42397049
Email: [email protected] - Web: www.greenpropulsion.be
Contact person: Mr Yves TOUSSAINT
GREEN PROPULSION was founded in 2001 as a spinoff of the University of Liege
(Belgium). It has since become an independent specialist in ever cleaner motorisations:

Expertise for decision-makers based on practical experience with alternative fuels,
battery electrics, hybrids, fuel cells and an overall “Well to Wheel” vision

Simulations and optimisation of virtual vehicles for cost effectiveness before
development

Evaluation of state-of-the-art technologies on our test benches

Full development of prototype vehicles by a multidisciplinary team
Thanks to the 15 years of experience of its founders and the more than 15 unique
prototypes it has built, GREEN PROPULSION now works closely - not just as a
subcontractor - with several European manufacturers, primarily in the fields of urban
transport and motor sports.
In the field of plug-in hybrids, in particular, GREEN PROPULSION is without a doubt one
of the leading independent R&D centres in Europe, with no fewer than seven topologies
and innovative management strategies to its credit.
Back to homepage
G-TECH2
Avenue Alexander Fleming 10
Tel: 32-(0)10889700 - Fax: 32-(0)10458560 - Mobile: 32-(0)476474645
Email: [email protected] - Web: www.gtech2.com
Contact person: Mr Gaétan DETROZ
Since 2006, G-tech2 develops and distributes various tools to monitor, train and evaluate
drivers of all kinds of vehicles.
Our knowledge in this very specific business field is based on many years of experience
of the Gentleman Driver School.
Our tools are utterly helpful to various users:





Professional Training Centres
Professional examiners
Insurance companies
Companies and authorities managing a fleet
Transportation companies in general
Besides distributing these tools, G-tech2 has also developed a network of trainers who
actively use our systems in Belgium and abroad.
Back to homepage
HANDICAP-CAR
Chemin de Thulin 54/2
7370 DOUR
Tel: 32-(0)65631192 - Fax: 32-(0)65521797
Email: [email protected] - Web: www.handicap-car.com
Contact person: Mr Jacques LAVENNE
Vehicles adaptation
Back to homepage
HEWA
Rodter Straße 102
4780 ST-VITH
Tel: 32-(0)80226870 - Fax: 32-(0)80226247
Email: [email protected] - Web: www.hewa.be
Contact person: Mr Henri WARNY
Since 1986, your professional partner for stamping light metal for:





Tools Production
Prototypes and samples
Small, medium and large series
Transformation in thicknesses of 0.05 to 1 mm
Unwind - punch - rewind
Back to homepage
HUBITOOLS
Rue de la Station 13
1300 WAVRE
Tel: 32-(0)10420385 - Fax: 32-(0)10420380
Email: [email protected] - Web: www.hubitools.com
Contact person: Mr Georges HUBINONT
HUBINONT S.A. was established in 1976 to import and distribute professional diagnostic
equipment and tools for the motor trade in Europe.
We have for 25 years developed a very strong relation with our suppliers and customers.
Our logistics and the impeccable quality of our service allow us to bring to the European
market an always improved choice of carefully selected innovative tools.
Our strategic location in the centre of Europe and our knowledge of the major European
languages allow us to be close to our customer with easy communication and fast
deliveries.
Our services to the OEM customers also include the logistics, the adaptation of the
products and packaging to customers’ needs and the sourcing of specific products from
all over the world.
HU42018 - In-Line Flaring Tool
This new double flaring tool allows the user to simply and easily flare thin walled steel
tubing or copper tubing. It works with a ratchet, wrench or air wrench and is low profile
to allow the user to work in tight spaces, on or off of the vehicle.
STE97215 - Wireless Electronic Stethoscope
An electronic device that quickly pinpoints source and location of noise during a road
test, even on long vehicles (such as trucks, buses...) thanks to clamps that can be fixed
onto springs, shocks, body mounts, brakes, engine blocks, etc.
Back to homepage
ICOR
Avenue Lavoisier 37
1300 WAVRE
Tel: 32-(0)10239523 – Fax: 32-(0)10881900
Email: [email protected] - Web: www.icor.be
Contact person: Mrs Marie COCHET
Main Presentation
Located in Wavre, ICOR is a leader and precursor in the development, production and
distribution of complex products aimed at the Automotive Glazing Industry:




Rubbers and mouldings (in plastic or/ and EPDM, mono- or multi-component),
Clips,
Tools for the removal/fitting of automotive glass,
Laminated glass repair systems.
ICOR’s aim is to increase the technical value of its products while optimizing the prices.
ICOR’s values are receptivity, proactivity and service minded.
Worldwide presence
ICOR benefits from an international expertise. Indeed, in a few years only we’ve
established our name in more than 55 countries around the world as a pioneer company
for the development and production of top-quality products. This allows us to work in
close collaboration with the biggest international:



Automotive glass manufacturers,
Automotive glass distributors,
Fitting centers.
Technique
At ICOR, we are capable of producing all types of rubbers and mouldings. We also
perfectly master the production of extruded parts:

In EPDM,


In plastic (PVC, ABS, TPE…),
Mono or Multi-components.
Of injected parts:



In EPDM,
In plastic (ABS, PVC, PMMA…),
With metal inserts.
Our technologies for the finishing of the parts are:




Cut-Out,
Vulcanization, pre-shaping and welding of the corners,
Application of acrylic adhesive tape,
Application of butyl.
Furthermore, ICOR is capable of producing custom-made products on the basis of
customer demand and/ or technical drawings.
Main references
Saint-Gobain Autover, AGC Automotive, Pilkington, Guardian Glass, Shatterprufe,
Belron, PG Group, Aston Martin, Axial, National Autoglass)
Back to homepage
IDEATEC
Zone Industrielle de Noville-les-Bois - Rue Léopold Génicot 19 A
5380 FERNELMONT
Tel: 32-(0)81420010 – Fax: 32-(0)81579170
Email: [email protected] - Web: www.ideatec.be
Contact person: Mrs Pauline JACQUEMIN
IDEATEC creates and produces consoles for use in controlling any equipment added to
emergency service and utility vehicles. Based on a single and independent connection,
IDEATEC systems greatly simplify the installation of this equipment.
IDEATEC is constantly developing its products in order to provide the optimum response
to the needs of the various markets as quickly as possible. Several consoles are
currently being developed, responding to user demands according to their formats.
Existing products are constantly being improved.
Back to homepage
IMPERIA AUTOMOBILES
Liège Science Park - Avenue Pré-Aily 20
4031 LIEGE
Tel: +32-(0)42476010 - Fax +32-(0)42476019 – Mobile: 32-(0)473570207
Email: [email protected] - Web: www.imperia-auto.be
Contact person: Mr Sacha PETROVIC
Specialising in the development of cleaner prototypes, Green Propulsion is reviving the
last Belgian make of car: Imperia.
Imperia Automobiles is preparing a world first: thanks to its sports hybrid motorisation
PowerHybrid®, the Imperia GP model is innovative for its extremely low consumption and
CO2 emissions, whilst still offering quite outstanding sports performance!
Opening the way to new vehicle design
The Imperia Automobiles project is clearly ambitious.
It involves nothing less than creating a new vehicle concept, implementing new
technologies, and at the same time introducing a new approach to driving and the
pleasure it brings.
It is ambitious too because this vehicle aims to join a stubbornly exclusive segment
where quality standards are very high.
And it is even more ambitious because Imperia Automobiles is proposing a world 1st in
the sector, both a small revolution and an incredible evolution.
The design of this vehicle hinges on three remarkable requirements:



Environmental concern, through motorisation based on Plug-in hybrid engine
technology supplemented by path-breaking autonomy in electric mode.
The pleasure of sport driving, obtained through high-level performance.
Attention to design conveyed through its neo-retro lines inspired from Imperia
history that will seduce the most demanding amateur.
3 parameters, 1 solution
There are vehicles that at present offer one, or even two, of these characteristics. The
originality and relevance of the Imperia Automobiles concept rest in the fact that it is the
only one able to meet all three of these requirements at the same time. The Imperia is
indeed a world first.
In keeping with the times, the Imperia project is part of a major trend in today’s world
which, quite rightly, is concerned more and more with the environment and sustainable
development. It also enables its potential purchasers to satisfy their taste for technology
oriented towards pleasure and aesthetic refinement whilst still making a sociallyresponsible gesture.
Back to homepage
INNOVATIVE PRODUCTION
Rue du Bout de Là-Haut 256
7390 QUAREGNON
Tel: 32-(0)65760190 - Mobile: 32-(0)491491413
Email: [email protected] - Web: www.3pmagic.com
Contact person: Mr Dovindo SIBAU
The “3P Magic ®” is an innovative design object mainly intended for the automotive world
which allows combining the smell of a car air-freshener like the “Arbre Magique” with a
private picture and finally a passion symbol of an enterprise/association logo.
The “3P Magic ®” can be used as a personal or professional gift.
Back to homepage
IPIC PLASTIC
Rue du Haut Vinâve 63 Bis
4682 HOUTAIN-SAINT-SIMEON
Tel: 32-(0)42864885 – Fax: 32-(0)42865243
Email: [email protected] - Web: www.ipicplastic.be
Contact person: Mr Joseph ROUSSEAUX
IPIC PLASTIC was established more than 20 years ago, of the encounter between a
mechanical workshop and a plastic injector. That is what makes its particularity: from the
conception to the final production and to the assembly, IPIC PLASTIC offers a real onestep counter that integrates the various manufacture stages.
Regular investments have enabled to increase not only the production capacity but also
the types of realised products. Therefore the new markets have opened.
A dozen machines
Regularly renewed, the Machinery Park of IPIC is composed of a dozen machines from 15
to 270 tons for an injection volume up to 800 cm3, together with the device in line with the
production constraints. The material thus treated are: PE, PP, PS, PoM, ABS, PA, TPE
with or without load.
The set-up service and our way of proceeding have enabled to express ourselves in
different sectors of activities:






Aerospace
Automotive
Defence
Medical
Electric Industry
Mechanical Industry
Back to homepage
ISOMATEX
Scientific Park Crealys - Rue Camille Hubert 29
5032 GEMBLOUX (LES ISNES)
Tel: 32-(0)81728686 – Fax: 32-(0)81728689
Email: [email protected] - Web: www.isomatex.com
Contact person: Mr Tigran VARTANIAN
The company ISOMATEX is the global leader in manufacturing enhanced volcanic rock
filaments (trademark: FILAVATM).
The production of FILAVA is unique thanks to a genuine and innovative treatment of the
raw material, basalt, which is enriched with various mineral additives to increase and
guarantee its original mechanical and chemical properties.
ISOMATEX has developed a unique production system which combines various leading
edge technologies for an accurate control of quality from raw materials to the end
product.
In particular, the production equipment’s have been carefully selected and configured in
order to assure a tight control of temperatures at all stages of the process, from melting,
refining and drawing of the lava up to the production of the enhanced volcanic rock
filament FILAVATM, which has a diameter of less than 10 microns
Back to homepage
JTEKT TORSEN EUROPE
Rue Grand Peuplier 11
7110 STREPY-BRACQUEGNIES
Tel: 32-(0)64672211 – Fax: 32-(0)64677142
Email: [email protected] - Web: www.torsen.com
Contact person: Mr Jean-Louis DAM
Manufacturer of limited slip differentials for cars (TORSEN differential)
Main customers: Audi, VW, Toyota, Range Rover, Hummer, Alfa Roméo, BMW.
Back to homepage
KLÜBER LUBRICATION
Rue Cardinal Mercier 100
7711 DOTTIGNIES
Tel: 32-(0)56483333 - Fax: 32-(0)56486252
Email: [email protected] - Web: www.klueber.com
Contact person: Mr Rudy VANLOOCKE
Our passion: innovative tribological solutions
Through personal relationships and consultation, we help our customers be successful.
With our ambitious technical concepts and experienced, competent staff we develop
advanced, efficient high-performance lubricants
Speciality lubricants for initial fill are at the core of our business. We offer our customers
expert tribological solutions by supplying tailor-made speciality lubricants directly to
customers in almost all branches of industry and regional markets. Our customers
include producers of components, modules, machines and systems as well as companies
using this equipment for their own production or processing activities.
KLÜBER LUBRICATION offers approximately 2000 different speciality lubricants, many
of them developed and manufactured to specific customer requirements. With
competent and customer-oriented consulting and wide-ranging services, our employees
have established KLÜBER LUBRICATION's excellent reputation as a partner to industry
and trade.
With more than 80 years of experience, ample expertise in the industry, numerous
certifications, some 140 research and development engineers and other technical
specialists as well as high-performance testing facilities, we are one of the leading
speciality lubricants suppliers worldwide.
KLÜBER LUBRICATION was founded by Theodor KLÜBER in Munich in 1929, and to this
day our headquarters is located there. Our approximately 1900 employees, however,
work for our customers in more than 30 countries. More than 900 of them are sales
specialists, working in close contact with customers to develop ideas for new, even more
efficient and eco-friendly speciality lubricants.
We focus on systematic expansion of our business, extending our presence worldwide
and meeting the demands of our customers – no matter what the business of our
customers is. More than 80 % of our turnover is attained outside Germany.
Back to homepage
KRONOS
Rue des Pieds d'Alouette 37
5100 NAMUR
Tel: 32-(0)81401639 - Fax: 32-(0)81401725
Email: [email protected] - Web: www.kronosracing.com
Contact person: Mr Jean-Pierre MONDRON
Operation and development of race cars
Sports marketing consultancy
Incentive and event organisation
Technical works on old and new cars
Wholesale of vehicles, parts and accessories
Back to homepage
LAMBIOTTE ET CIE
Grand-Rue 79
6724 RULLES
Tel: 32-(0)63410080 - Fax: 32-(0)63411698 - Mobile: 32-(0)496562526
Email: [email protected] - Web: www.lambiotte.com
Contact person: Mr Luc MEULDERS
LAMBIOTTE & CIE started its activities in 1860 with forestry and sawmill exploitation,
producing railway sleepers. In a desire to increase the value of its wood waste
production, the company adopted an innovative carbonization process to convert wood
to charcoal. One of the chemical by-products of this distillation technology was
methanol.
From 1901, LAMBIOTTE’s interest in chemicals grew with the production of
formaldehyde from wood methanol. By 1970, LAMBIOTTE’s passion for chemistry led to
the use of formaldehyde as a reagent in the production of acetals and hemicetals, known
as solvents. Since then, the company has continued to develop its expertise in
production technologies, making it a leader in the highly specialised field of acetals
synthesis.
Acetals belong to a specific chemical family, resumed in the generally term solvent,
distinct from ethers. LAMBIOTTE’s acetals are produced by reactions between alcohols
and aldehydes. The acetal molecule can be either linear or cyclic. With regard to their
toxicity and eco toxicity, LAMBIOTTE’s acetals show very good profiles for health and
environment.
Back to homepage
LASEA
Rue Chasseurs-Ardennais 10
4031 ANGLEUR
Tel: 32-(0)43650243 – Fax: 32-(0)43843755
Email: [email protected] - Web: www.lasea.eu
Contact person: Mr Axel KUPISIEWICZ
Laser systems and solutions for industry:
• Marking systems for parts tracking, vision and data management.
• Plastics welding systems.
• Surface texturing systems (decoating, patterning).
• Micro-machining systems.
• Components and accessories (CO2 sources, YAG, laser to fibre, diodes, optical
engineering, laser safety…).
Partner to the idea of integration on production lines:
Laser expertise: preliminary studies, feasibility studies, return on investment
calculations, validation, development of complete processes and prototypes.
Sectors of application: laser marking and tracking, laser plastic welding, decoating,
micro-machining, surface treatment…
Back to homepage
Rue de la Croix du Maïeur 17
7110 STRÉPY-BRACQUEGNIES
Tel: 32-(0)64841412 – Fax: 32-(0)64261454 – Mobile: 32-(0)477918054
Email: [email protected] - Web: www.laserco.be
Contact person: Mr Hugues DESMECHT
OUR PRODUCT
Protect your metal parts against wear with « laser cladding »
OUR EXPERTISE
To develop and apply customised laser claddings resisting to:






Abrasion
Corrosion
Erosion
Cavitation
Shocks
Chemical products (acids, bases, chlorides, etc.)
Create
Are you looking for new applications? We can help you create new kinds of cladding.
Diamonds, ceramics, metals and inert substances can all be used in our cladding
Develop
You would like to improve the reliability of your anti-wear surfaces and their lifespan,
enhance the availability of your installations and reduce production loss: these are our
development goals.
Laser cladding can improve your performance.
Customise
Just tell us what your metal parts have to endure, the atmosphere in which they work
(heat, humidity, etc.), what surface finish is required, and we will conceive the cladding
to suit your needs.
Apply
If you want to personalise the cladding for your surfaces, we can realise it, using the
latest laser technology
OUR SERVICE
• Custom made
We will adapt our cladding process to your application
• Before and after laser cladding
We will descale the old surface and finish off the part once the cladding has been
applied.
Back to homepage
LAZZERINI
Zone Industrielle de Ghlin - Baudour - Rue des Roseaux 2
7331 BAUDOUR
Tel: 32-(0)65430235 – Fax: 32-(0)65430237
Email: [email protected] - Web: www.lazzerini.be
Contact person: Mr Thierry LAZZERINI
Founded in 1963 by Giulio LAZZERINI who had a strong belief in the coming success of
composite materials, our company specialised at first in the manufacturing of roof
making-up lengths and tombstones
In 1967, our company got the status of limited company and moved to a bigger industrial
site. We then manufactured upholstery elements for wagons and employed 5 workers.
In 1990, Thierry LAZZERINI, in charge of the marketing support, enhances the growth of
the company, inducing the appointment of 5 new workers and the extension of the
workshop area to 1500 m².
In September 2003, we undergo a terrible fire which devastates our buildings in
Ecaussinnes. We put ourselves following the search for new establishments which we
find in the zoning of Ghlin - Baudour or we take a building of 1500m² on a ground of 1,5ha
with very new installations of treatment of foul air (dust and gas).
We are very active in the bathroom equipment field for which we make polyester
components for nursery, paediatric and maternity furniture.
We have developed complete bathroom cubicles comprising: shower, wash basin and
toilet, suitable for hotels, communities and public welfare services (C.P.A.S).
We also make other items in various other fields such as:
Car bodywork: Fun Cup bodywork, seats, ambulance parts, cornice covering for the
interior bodywork of the Glutton street cleaner.
Construction: isolated industrial gutter troughs, roofing connectors, various types of
waterproofing, balconies, terraces, swimming pools.
Bathroom equipment: bathroom components, kitchen sinks, shower cubicles, complete
bathroom cubicles.
Technical industrial components: isolated industrial gutter troughs, saline sprays,
Poinver (glass crusher containers)
Scenery / Theme Parks: theatre and advertising scenery, Eurodisney, Parc d'Aventures
Scientifiques, Walibi, etc.
Back to homepage
LECLERCQ ETS
Zone Industrielle n° 3 - Rue Prés-Champs 10
4671 BARCHON
Tel: 32-(0)43879595 - Fax: 32-(0)43879598
Email: [email protected] - Web: www.leclercq-belgium.com
Contact person: Mr Albert PAGGEN
Repair of starter motors and alternators, sale of complete machines and spare parts for
repairers.
Back to homepage
LISMONDE DANIEL - HIGH TECH
Rue Joseph Wauters 37
4350 REMICOURT
Mobile: 32-(0)495208290 - Fax: 32-(0)19544705
Email: [email protected] - Web: www.hi-tech.be
Contact person: Mr Daniel LISMONDE
Tuning and Racing





Body kits and body parts for car and motorbike
Light brows
Races and adjustable spoilers
Air intakes
DTM splitters
Materials






CFK –Polyester
Carbon
Kevlar
Polyurethane
ABS
Aluminium
Back to homepage
LMS
Rue des Chasseurs-Ardennais - Liege Science Park 8
4031 ANGLEUR
Tel: 32-(0)43616969 - Fax: 32-(0)43616980
Email: [email protected] - Web: www.lmsintl.com
Contact person: Mrs Els COENEN
LMS is a leading provider of test and mechatronic simulation software and engineering
services in the automotive, aerospace and other advanced manufacturing industries.
As a business segment within Siemens PLM, LMS provides a unique portfolio of products
and services for manufacturing companies to manage the complexities of tomorrow’s
product development by incorporating model-based mechatronic simulation and
advanced testing in the product development process. LMS tunes into mission-critical
engineering attributes, ranging from system dynamics, structural integrity and sound
quality to durability, safety and power consumption.
With multi-domain and mechatronic simulation solutions, LMS addresses the complex
engineering challenges associated with intelligent system design and model-based
systems engineering. Thanks to our technology and over 1250 dedicated people, LMS
has become the partner of choice of more than 5,000 manufacturing companies
worldwide. LMS operates in over 30 key locations around the world.
Who doesn’t want to develop a quiet, comfortable, more reliable and greener vehicle?
The automotive industry is operating in a continuously changing market environment.
Whether you’re focusing on automotive OEM, supplier, off-road, truck & bus or railway
industry, LMS is your innovative system engineering partner in boosting brand value and
sustainability. Built on long-term relationships with its customers and engineering
expertise, LMS continues to set the standards for Model-based Systems Engineering with
mechatronic simulation software, physical prototype testing systems and engineering
services. From pre-programming over conceptual design to tests and validation, LMS
helps you to find the delicate balance between technological design options and vehicle
functional performance in every phase of the development process.
Back to homepage
MACTAC EUROPE
Boulevard Kennedy
7060 SOIGNIES
Tel: 32-(0)67346211 - Fax: 32-(0)67330574
Email: [email protected] - Web: www.mactac.eu
Contact person: Mr Philippe LOUWETTE
A reputation for innovation
Through the years, highly skilled research & development teams at MACTAC have helped
the company pioneer many industry firsts.
MACTAC was the first company to offer the world the following innovations:




patented "non-ooze" adhesive sheet products with scored liners for the offset
printing industry;
mounting and over laminating films with optically clear adhesives and UV
inhibitors for the photographic industry;
exclusive hot melt adhesive constructions for freezer labelling applications for the
packaging industry.
unique
tyre
labelling
products
for
the
automotive
industry
(www.mactac.eu/solutions-automotive-3-2.htm);
1. Acrylic Foam Tapes
http://www.mactac.eu/products-acrylic-foam-tapes-aft-3-2317--2318.htm
MACTAC Acrylic Foam Tapes are ideal for applications where high tack and
extremely high bond are required: e.g. heavy POS displays, demanding indoor or
outdoor applications in Building applications, cladding, fixation of structural
windows, in the automotive industry and many other applications.
2. Stone Chip Protection
http://www.mactac.eu/products-stone-chip-protection-3-2321--2322.htm
The smart choice to win the battle against stone chip damage!
Stone Chip Protection 200 and CrystalProtect 150 consist of a Polyurethane (PU)
film coated on one side with a permanent acrylic adhesive.
Automotive and aerospace industry: specially designed to reduce stone chipping
and insect damage on painted surfaces. Excellent for protecting car underbodies
and side mirrors, spoilers, rocker panels, etc…
3. CPF
http://www.mactac.eu/products-cpf-3-2335--2337.htm
Short term prevention against damage and scratches during assembly, storage,
show room demonstration or transportation
•Short term resistant to abrasion and weathering
•No impact on the protected surface (no contamination with adhesive)
•No adhesive transfer when peeling off
•Good compatibility with painted surfaces
•Easy to laminate smoothly at ambient temperature without wrinkles or air
bubbles
« Personalize your car with Tuning Films! »
http://www.mactac.eu/products-tuningfilm-black-matt-1-2444--2376.htm
This commitment to R & D has positioned MACTAC as a leading innovator in the pressure
sensitive industry.
Manufacturing Capabilities: Achieving New Heights
MACTAC is not only focused on new products. High performance and quality consistency
become the key words in today's industrial world.
It is why MACTAC EUROPE SA has implemented in its manufacturing facility a continuous
quality improvement system certified to the ISO 9001 standard. This enables employees
to deliver top quality products and top quality services to our Customers.
But quality is also a question of manufacturing equipment. Here too MACTAC has to be
considered as an industry leader with the latest investment in manufacturing and
finishing equipment on its European site. This new fully automated plant is to be
considered as the jewel of the self-adhesive industry which guarantees quality
consistency to satisfy customer demands.
Ultimately, satisfied and successful customers are the measure of MACTAC quality. And
pursuing this value will continue to drive MACTAC into the future.
Back to homepage
MANTHYDRO
Grand’Route 562
4400 FLEMALLE
Tel: 32-(0)42339620 – Fax: 32-(0)42332130
Email: [email protected] - Web: www.manthydro.be
Contact person: Mr Antonio AQUILINA
Pipes, fittings, hydraulic adapters and accessories
Industrial hoses and couplings
Flexible hoses and stainless steel fittings
Tubes, joins with rings – rapids, compensators, valves, accessories
Back to homepage
MATHONET MARCEL
Haut de Treme 3
4801 STEMBERT
Tel: 32-(0)87331183 – Fax: 32-(0)87336135
Email: [email protected] - Web: www.mathonet-moteur.be
Contact person: Mr Marcel MATHONET
The company’s business is the repair of petrol and diesel engines, turning, grinding,
garage work and engineering in general, purchase, sales, import, export and
manufacture of parts relating to these activities.
Sectors: automotive, transport, agriculture, civil engineering, industry and marine.
Back to homepage
MECANIQUE RESSORT BELGIUM
Prolongement de l’Abbaye 86
4040 HERSTAL
Tel: 32-(0)42405570 – Fax: 32-(0)42405579
Email: [email protected] - Web: www.mecaressort.be
Contact person: Mr Jos BODEN
MÉCANIQUE RESSORT BELGIUM is a renowned company for its production of:




Precision springs in wire and strip steel
Compression, traction, torsion and form springs
Stamping and bending operations according to customer needs
Assemblies and sub-assemblies - mechanic precision welding
in small, medium and large series.
We put at your profit a dynamic team of technical professionals and a long experience in
very stringent customer specific markets. We dispose of a well-adapted machine shop
which was the result of intelligent investments towards customer target markets over a
period of more than 70 years in spring business. This makes us your competitive partner
for a quick and reliable solution.
We are located in a modern building complex in the industrial site of the Hauts-Sarts,
near to a favourable network of road and air transport facilities. We work in creative
cooperation with our customers of various market segments. Our principal customer
sectors are: aeronautics and aerospace, automotive, armament, nuclear, electric
household appliances, light and building application industry.
In order to satisfy customer needs in a worldwide competition, we established several
partnership agreements with highly qualified partners inside and outside Europe.
In order to serve you and your increasing stringent needs, every day you can count on
our professional and dynamic solutions.
Back to homepage
MECELFIN
Avenue Albert Einstein 12
Tel: 32-(0)10452056 - Fax: 32-(0)10454062
Email: [email protected] - Web: www.bqeng.be
Contact person: Mr Bernard STEENHOUT
Internal arrangement of priority vehicles (ambulances, police, army, minibus) with a
department "marking" of vehicles
Back to homepage
METALSAB
Rue Petite Foxhalle 116
4040 HERSTAL
Tel: 32-(0)42400278 - Fax: 32-(0)42856375 – Mobile: 32-(0)498689248
Email: [email protected] - Web: www.metalsab.be
Contact person: Mr Vincenzo DI MARIA
Established in Herstal (a province of Liège) since 2005, and managed by Enzo Di Maria,
METALSAB specialises in the treatment of surfaces and the painting of metallic parts for
the high-precision mechanical industry. Its accreditations with companies such as CMI
and even the Liège Space Centre make METALSAB a renowned expert in its industry
sector.
Our technicians ensure the sanding, sandblasting, metallisation, phosphating, stainless
steel passivation and painting of elements and products for the industry. We also work
for the construction industry (cleaning and renovation of gates) as well as vehicle
renovation (bodywork and rims).
Additionally, we offer craftsman skills for the purpose of restoring antique furniture, such
as cast iron cookers or tables, or creating prototypes. This activity is aimed at
professionals (design businesses, architects and decorators) as well as individuals, who
can contact the company direct.
Our technicians scrupulously follow the industrial processes associated with various
operations, and when the work is completed we provide all the certificates required for
your checks (e.g. painting certificate).
Back to homepage
MICROMEGA DYNAMICS
Parc Industriel de Noville-les-Bois - Rue du Trou du Sart 10
5380 FERNELMONT
Tel: 32-(0)81248100 - Fax: 32-(0)81248101
Email: [email protected] - Web: www.micromega-dynamics.com
Contact person: Mr Nicolas LOIX
MICROMEGA DYNAMICS offers innovative solutions to control and analysis problems
including active vibration damping and high precision positioning mechanisms.
Using technology developed in over 10 years in the aerospace industry, we have gained
competencies in vibration analysis, vibration control, sensors and actuators technology,
structural control design, advance software and electronics.
We have developed a whole range of products and services for commercial industry in
order to solve problems related to vibrations, stability, fatigue and high precision
positioning.
Our mission is to provide our customers with products and services based on our core
competencies in vibration problems troubleshooting, mechatronics and active damping
technology.
Together with our customers we develop solutions that improve the operation and quality
of their products or processes.
Back to homepage
MICRONEXT
Rue de la Tayette 93
6730 SAINT-VINCENT
Tel: 32-(0)63444647 – Fax: 32-(0)63445024
Email: [email protected] - Web: www.measure-control.com
Contact person: Mr Etienne D’HOEDT
MICRONEXT, a public limited company set up in 1982, specializes in the design and
manufacture of measuring and control equipment. It has an in-house design office and a
production unit for prototypes and small series production. This flexible structure has
allowed a network of partners to be developed, enabling the company to adapt in very
short time periods, with a quality standard guaranteed to match its clients’ requests.
MICRONEXT is involved in the automotive sector, with its windscreen wiper control
apparatus (load gauge and angle measurement device) and in the process automation
field, MICRONEXT carries out design studies and produces tailor-made equipment
providing solutions to its customers’ specific problems.
Back to homepage
MITRACOWALL
Place de la Station 5
6041 GOSSELIES
Tel: 32-(0)89510350 - Fax: 32-(0)89418509 - Mobile: 32-(0)494507666
Email: [email protected] - Web: www.mitracowall.be
Contact person: Mr Jean-Jacques PETIT
MITRACOWALL specializes in surface treatments relating to specific applications,
particularly those recommended for productions that create additional value, such as:
aeronautic aluminium, carbon composite, honeycomb panels and special metals.
Today we find that the aeronautics, automotive, leisure and other industries show a
“nano” tendency directed towards surfaces that may or may not be from metal, have a
coating which may or may not be organic, but that are, for the most part, highly
sophisticated.
This tendency has several reasons which are specific to the various sectors of activity;
for example, in the automotive industry, to embellish chromed surfaces or surfaces of
another nature; in the aeronautics industry, to increase corrosion resistance; in the
printing industry, to protect plates from the laser stings. Thus, in case of a problem, it
proves necessary to reprocess this state of the high-end surface, while preserving not
only the configuration of the part, but also the various layers inherent to very expensive
pre-treatments already applied to the surface. If you are confronted with this problem,
keep in mind that MITRACOWALL has state-of-the-art technology and extensive process
know-how to intervene, using highly ecological methods such as BIOCARB® and
BIOCORN®, thus enabling you to recover your object and the investment of its added
value.
These methods have been developed with the support of the Walloon aeronautics
industry. After more than a year of research, we obtained certification for our various
processes. The recognition by this high-tech industry has led us to offer our services to
other sectors as well, while carrying on our research aimed at improving and developing
new technologies, which continues to be the main focus of MITRACOWALL’s strategy.
Back to homepage
MONO BELGIUM CORPORATION
Parc Industriel des Hauts Sarts - Première Avenue 24
4040 HERSTAL
Tel: 32-(0)42569292 - Fax: 32-(0)42569999 - Mobile: 32-(0)475448196
Email: [email protected] - Web: www.mono-group.com
Contact person: Mr Pierre BRISSA
MONO is a group of passionate and highly skilled people devoted to perfection of art and
excellence of service to our customers. Spread in Europe but also in China and in the
USA, Mono Group is a worldwide supplier of state-of-the art car interior decorations.
Noble decors processed with up-to-date technologies are our daily companion. Our car
interior decorations are not only filling our customers with enthusiasm but also with full
satisfaction.
Back to homepage
MORETTE
Zone Industrielle de Martinrou - Rue du Progrès 2
6220 FLEURUS
Tel: 32-(0)71800705 - Fax: 32-(0)71800305 - Mobile: 32-(0)474329055
Email: [email protected] - Web: www.morette.com
Contact person: Mr Harold O’CONNOR
How did the twin headlights come about?
In 1977 Mr Morette purchased a Citroën CX, he was at that time a car electrician. The CX
was very well known for its poor lighting and, after smashing the headlights whilst driving
during the night (couldn't see the bend), decided to modify the replacements, using a
similar type of light as the DS (his previous car). On the next service, his local dealer
asked him if he could supply other customers with the modification, as by that time the
much more powerful GTI was on the road, which still had the same lighting problem. So
on the 1st of November 1979 the company SAFRI was created (trading as Morette®).
Are there performance advantages or disadvantages with them?
The lighting from our products increases vision at least 30 % compared with the original
equipment lights. The efficiency of a round optic is and always will be better than an
Original Equipment optic that needs to follow the curve of a car BUT the full effect of a
twin head lamp conversion comes when you are driving in full beam, you take the day into
the night.
Can it still be legal if you turn one of the holes into a port to get air into the engine?
This is a practice that is used a lot in rallying, but not for the purpose of getting air into
the engine, they use it as an air intake for cooling the break disk. The lights are still road
legal.
Is there anything amazing, people should know about Morette? i.e. what they're made of
etc.
People should know that to make a kit to our standard takes around 650 working hours
(3months) in design and development, and all our kits are TUV approved (German
standard, recognised by every country in Europe) and also shortly they will be DOT
(standard for the USA) which explains the price (you get what you pay for). You must
have seen our products on a lot of rally cars, from Citroen Visa, Ford Sierra Cosworth,
Escort Cossie, Focus WRC, Impreza Wrx, etc... Our best seller is still the Peugeot 504,
supplied to Africa to be fitted to the Pick-up, still in production there (good test bench for
the resistance). We are supplying China, even if they are copying our designs (beware of
the copies sold under our name or Morette style), and supply all spare parts for every kit
we have produced from day one.
Products






Body kits
Headlights
Mirror covers
Misc
Rear lights
Styling deco
Back to homepage
MOSA FREIN
Chaussée de Waterloo 490
5002 SAINT-SERVAIS
Tel: 32-(0)81733273 - Fax: 32-(0)81738010
Email: [email protected] - Web: www.mosa-frein.be
Contact person: Mr Marc RAWAY
Brakes, servo-brakes and accessories
Back to homepage
MOVENA
Rue Haute 9 Bte 3
1300 WAVRE
Tel: 32-(0)10238580 - Fax: 32-(0)10238589 - Mobile: 32-(0)475701461
Email: [email protected] - Web: www.movena.com
Contact person: Mr Philippe VAN DAMME
MOVENA is a dynamic company, specialized in automotive security glazing and light
armoring products for the entire vehicle (windscreen, side and rear windows, car body,
roof, space located under the doors …).
We are constantly developing new and innovative ways to protect public forces and
emergency services’ vehicles and to protect people with Security Solutions.
Our transparent protection, used for vehicle windows, consists of laminated glass made
of special composite interlayers or of coated polycarbonate glazing. All our products
comply with international performance and quality standards.
For our opaque protection we use several materials such as aramid fiber, ultra-high
molecular weight polyethylene and other high-tech materials.
A combination of both types of protection is used in the process of securing your entire
vehicle and will offer you the protection you need.
Next to our well known glazing solutions and opaque protections, our product range also
covers security in public spaces through products like our bomb blast containers.
Do not hesitate to contact us for more information.
Back to homepage
NANOCYL
Rue de l'Essor 4
5060 AUVELAIS
Tel: 32-(0)71750380 – Fax: 32-(0)71750390
Email: [email protected] - Web: www.nanocyl.com
Contact person: Mr Francis MASSIN
NANOCYL is a company founded in 2002.
With a staff of over 45 people, 6 inventions including 51 patents and a constantly
increasing production capacity, NANOCYL has become a leading company in Wallonia
and can be proud to be among the three main world actors in the field of carbon
nanotubes. NANOCYL has in fact become a leading industrial actor following the
commissioning in 2010 of a reactor with a capacity of 400 tonnes per year.
In addition to its carbon nanotubes (NANOCYL 7000), NANOCYL has also developed a
range of new high added value products in polymers, silicones, water, containing
predispersed carbon nanotubes which are sold under the PlastiCyl, EpoCyl, AquaCyl,
BioCyl and ThermoCyl brands.
NANOCYL products are today used in car parts and in the electronics industry where
antistatic properties are required. Fuel lines systems, fuel tanks; body cars fenders are
increasingly qualified by OEM’s to impart electrical conductivity to the part for safety
reasons or to decrease the weight and improve the surface quality of e-painted parts.
NANOCYL’s vision is to constantly provide its industrial and university partners with
innovative solutions; this is why the company is involved in very significant R&D activity.
Research has to do with preparing new nanotubes as well as making custom
“improvements” according to the various needs and applications (coatings, functions,
variations in length or diameter, etc.). Development is based on the creation of new
nanotube based products and on existing products optimisation to fit the industry needs.
Back to homepage
NEW ABRACO SERVICES
Rue de la Croix du Maïeur 17
7110 STREPY-BRACQUEGNIES
Tel: 32-(0)64263309 – Fax: 32-(0)64261454
Email: [email protected] - Web: www.abraco.be
Contact person: Mr Philippe FIEVEZ
NEW ABRACO SERVICES, a company built on the joint expertise of Abraco and Sodiabel,
built a new operation site in 2005.
ABRACO specialises in contract custom manufacturing of industrial diamond and CBN
tools by galvanic deposition (electrodeposit) and diamond segment welding (sintered
products).
Diamond
Our extensive experience designing diamond electrodeposited and sintered tools opens
the door to use of a variety of industrial diamonds (natural, synthetic, borazon) in a wide
range of applications.
Tool
An infinite variety of shapes, sizes, and applications
Services
Our staff is dedicated to providing clients the highest level of quality and designing an
effective solution for each application.
NEW ABRACO SERVICES is a Belgian company based in Strépy-Bracquegnies (province
of Hainaut), in the heart of Europe… and close to our clients.
Back to homepage
NEXANS BENELUX
Rue Vital Françoisse 218
6001 MARCINELLE
Tel: 32-(0)71440440 – Fax: 32-(0)71440563
Email: [email protected] - Web: www.nexans.be
Contact person: Mr Alain DE DIER
Worldwide leading expert in the cable industry
With energy as the basis of its development, NEXANS is a global player in the
infrastructure, industry, building and Local Area Network (LAN) markets.
As a worldwide leader in the cable industry, it offers an extensive range of cables and
cabling systems to raise industrial productivity, improve business performance, enhance
security, enrich the quality of life, and assures long-term network reliability.
With an industrial presence in 40 countries and commercial activities worldwide,
NEXANS employs 24,500 people and had sales in 2011 of 7 billion euros. NEXANS is
listed on Nyse Euronext Paris, compartment A.
Infrastructure
NEXANS provides complete cables and cabling solutions for power production,
transmission and distribution. New technologies significantly increase capacity and
reduce the danger of blackouts.
To reinforce rail safety and efficiency, we have products especially designed tor the
demanding railroad environment.
And to meet diverse needs of incumbent and new telecom operators, NEXANS has
customized solutions aimed at lowering capital expenditure and operating costs.
For the world’s busy airports, we offer cables and cabling systems for energy and
communication networks, terminals, baggage handling systems, runway lights, control
towers, etc.
Industry
NEXANS offers a complete portfolio of cables and solutions for market segments as
diverse as the automotive, rolling stock and aerospace industries, shipbuilding, nuclear
power, oil & gas and petrochemicals, material handling and automation.
We add value through advanced technologies and durable high-performance products.
Building
NEXANS supplies cables and network solutions for structures of all types: from small
residences to public and office buildings and big industrial complexes.
NEXANS pioneered fire-performance cables for public safety, created industrial Ethernet
solutions to unite the office and the factory floor platform, and ensured easy recyclability.
From standard products to renewable energy solutions, these products contribute to the
sustainable buildings of the future.
Local Area Networks
NEXANS provides copper and optical fiber cabling systems for new resource-intensive
applications, like Data Centers, Security services, and Storage Area Networks.
NEXANS’ advanced solutions are handling core business data, protecting operations in
sensitive conditions, and giving organizations high-speed transmission and the ability to
protect and retrieve vital information.
NEXANS Benelux
NEXANS Benelux is one of the biggest manufacturers of cables in Belgium. Indeed, it
possesses wide, specialist know-how and is heavily represented in the industrial market.
Besides cables and components, the company also offers turnkey solutions.
Back to homepage
NGK CERAMICS EUROPE
Rue des Azalées 1
7331 BAUDOUR
Tel: 32-(0)65760210 – Fax: 32-(0)65600689
Email: [email protected] - Web: www.ngk.be
Contact person: Mr André WAUTERS
Catalytic converter for purifying automotive exhaust for cars
HONEYCERAM® has been developed by NGK through extensive experience with
ceramics technology – experience that represents a positive approach in the fight
against pollution.
HONEYCERAM® is a porous ceramic with high thermal and impact resistance. It is
manufactured using the latest techniques of precision extrusion to give a honeycomb
structure and superlative strength. It is designed to give a large surface area, facilitating
effective catalytic conversion within a compact design.
HONEYCERAM® is used in catalytic converters all over the globe. More than 300 million
substrates have been manufactured over the past 25 years.
Back to homepage
OPTRION
Boulevard de Colonster 4
4000 LIEGE
Tel: 32-(0)43615962 - Fax 32-(0)43515968
Email: [email protected] - Web: www.optrion-tech.com
Contact person: Mr Daniel SIMON
A company involved in high resolution metrology based on a holographic camera
intended for measuring micro-movements (down to 8nm) of parts and structures (over
1m²): contactless, full field, vibration analysis, non-destructive testing (internal defects),
characterization (coefficient of thermal expansion, resetting models by finite elements,
stress studies...). Strengths of the system: high resolution, fast, works in real time, ease
of use, overall view. Company strengths: responsiveness, short deadlines, R&D
possibilities, expertise.
R&D capability
The company has been a partner in 6 European projects. Its speciality is the prototyping
of optical measuring instruments as well as complicated measurement services with
regard to the geometry of complex parts.
Back to homepage
PEGARD PRODUCTICS
Avenue Reine Elisabeth 59
5300 ANDENNE
Tel: 32-(0)85849811 - Fax 32-(0)85849952
Email: [email protected] - Web: www.pegard.com - www.harotechnologies.com
Contact person: Mr Jacques BAGUETTE
PEGARD is active in the machine-tool business for more than 50 years and became wellknown in the whole industrial world for its large and precise horizontal boring and milling
machines. Created in 1937 and now a subsidiary company of the group OGEPAR,
PEGARD engineers and delivers tailored solutions for the flexible machining of large
precision parts offered to the customer in a turnkey solution. PEGARD is specialised in
the manufacturing of large horizontal boring and milling machines and machining
centres, committed to quality and performance, for the automated machining of large
mechanical parts, such as turbine rotors, valves, pumps, engine blocks, compressor
housings and components for earth moving equipment… for users demanding ultimate
levels of precision.
PEGARD extended since 2008 his production range to vertical turning lathes and more
recently to sharpening machines for hobs, broach tools, slabmills ... (brand name Haro
Technologies)
Subcontracting
Besides its boring and milling machines and vertical lathes, PEGARD offers of course a
well-known after-sales service (works on site, spare parts, preventive maintenance…),
the retrofit of existing machines as well as a machine shop and an electric department
able to realize complex sub-contracting works.
Back to homepage
PHELECT
Rue des Trois Entités 15
4890 THIMISTER-CLERMONT
Tel: 32-(0)87560274 – Fax: 32-(0)87560273
Email: [email protected] - Web: www.phelect.be
Contact person: Mr Hubert PINCKAERS
Heavy goods electricity, tachographs installation and repair, speed limiters, GPS,
telephones, radios and satellites, downloading systems for digital tachographs, roller
test bench for tachographs and speed limiters, training for installers of analogue and
digital tachographs and speed limiters.
Development of its own roller test bed for tachographs and speed limiters.
Back to homepage
POLMANS
Rue d’Artagnan 14
4600 VISE
Tel: 32-(0)43791371 – Fax: 32-(0)43797000
Email: [email protected] - Web: www.polmans.be
Contact person: Mr Daniel POLMANS
For more than 35 years, the company POLMANS is active in the field of precision
engineering, especially in the fields of aeronautics, nuclear, defense, medical, steel...
It has been nearly 15 years since the company has also turned in the field of plastic
injection.
The company is specialized in the prototypes, single pieces, in small and medium series.
We have about 40 machines on a site covered over 3,000 square meters and a staff of 40
persons.
Back to homepage
POLYONE
Rue Melville Wilson 2
5330 ASSESSE
Tel: 32-(0)83660211 – Fax: 32-(0)83660360
Email: [email protected] - Web: www.polyone.com
Contact person: Mr Jean-Michel RENKIN
POLYONE is a global supplier of colour and additive master mix based solutions. Our
solutions improve the yield of processes used to finish plastic products in order to meet
our customers’ quality requirements.
POLYONE has design centres intended for serving the European market. Its design
centres and specialist laboratories have the latest equipment developed with a view to
reproducing manufacturing conditions. Its design centres enable new products to be
launched more quickly and more effectively.
Back to homepage
PRECICAL
Rue du Tilleul 33
4681 HERMALLE-SOUS-ARGENTEAU
Tel: 32-(0)43749370 – Fax: 32-(0)43749374
Email: [email protected] - Web: www.precical.be
Contact person: Mr Alain TROUPIN
Thanks to its integrated conception and design department, PRECICAL can offer a
personalized production process.
The whole process is under the responsibility of one and only person, from conception
and design to the testing of your mould in working conditions.
The mastering of the most recent CAD/CAM software’s allows us to produce high quality,
detailed and accurate plans.
Very high speed electronic links make possible the dynamic exchange of information and
data between PRECICAL and your company.
Back to homepage
PRECIMETAL PRECISION CASTINGS
Chaussée de Mons 89
7180 SENEFFE
Tel: 32-(0)64522000 – Fax: 32-(0)64522010
Email: [email protected] - Web: www.precimetal.com
Contact person: Mr Edward RABENDZKI
Parts from 1 gr to 50 kg, produced by the lost wax process, in all the grades of steel,
including the stainless and various alloys of copper, nickel and cobalt
Besides the automotive and railway transport sectors, PRECIMETAL PRECISION
CASTINGS supplies the following markets:







Aeronautical
Defence industry
Medical material
General mechanics,
Food processing equipment
Transport and treatment of fluids
Building
Development of the manufacture of critical parts for aeronautical, medical and general
engineering applications using high-alloy steels
Back to homepage
PRECISION LIEGEOISE
Rue Désiré Janson 59
4040 HERSTAL
Tel: 32-(0)42405760 – Fax: 32-(0)42481179
Email: [email protected] - Web: www.precision.be
Contact person: Mr Pierre DUMONT
The PRECISION LIEGEOISE is a sub-contractor in precision mechanics (turning, milling 4
/ 5 axes, grinding, deep drilling, welding...) which ensures the production of parts in small
to medium-runs and the design - manufacturing - installation of mechanical subassemblies, production and/or control tools.
You have a drawing, a sketch, an idea? Based on the information you provide us, we
design with you complete mechanical machines, mechanical sub-assemblies, tools.
When necessary, we purchase, cut, deep drill the raw material.
Our workshop can meet your needs in:






precision turning digital, conventional, vertical, Mastercam network CAM
precision milling on CNC 3, 4, 5-axis continuous machines Mastercam network
CAM
plane and cylindrical grinding
deep drilling, stellitage, welding, honing, polishing
mechanical sub-assemblies and special tools mounting
metrology in air-conditioned room, 3D CNC measuring, reports, certificates
according to your specifications, integration into your quality system
In addition, we manage the majority of heat treatments, chemical spray..., and we assure
ourselves the pickup and delivery of your rush orders.
Back to homepage
PROCOPLAST
Schnellewindgasse 17
4700 EUPEN
Tel: 32-(0)87595090 – Fax: 32-(0)87595099
Email: [email protected] - Web: www.procoplast.be
Contact person: Mr Geoffroy BOONEN
PROCOPLAST is a plastic injection company. Its core business is based around tool
manufacture and the production of complex parts in long runs (2 component injection
and over-moulding of metal/electrical parts) on automated production lines.
PROCOPLAST operates in the automotive, electrical and electronics sectors as a main
Tier One Supplier.
PROCOPLAST can help you with all aspects of an injection project (complex parts with
fine tolerances or ones that require automated production). We have CAD programs and
use a sophisticated quality management system. PROCOPLAST is ISO 9001, ISO 14001
and TS16949 certified. Constant innovation is all-pervasive and offers the best return to
our customers.
We specialize in the following types of products:
• Over-moulding injection of contacts:
- Sensor boxes (airbags), electrical connectors.
- Housing for locks.
• Connection of various components:
- Brush holders for electric motors.
- Electronic boxes for accelerator pedals.
• Injection of plastic parts with extremely fine tolerances.
• Parts assembly.
Main customers: Bosch group, Kiekert, Hella…
Back to homepage
PROCOTEX
Rue Théodor Klüber 8
7711 MOUSCRON
Tel: 32-(0)56483838 – Fax: 32-(0)56484351
Email: [email protected] - Web: www.procotex.com
Contact person: Mr Bruno DOUCHY
One thing is sure, Belgium is well known for two famous industries:
1. It's the world centre of the highest standard quality linen fibres for more than 3.000
years. PROCOTEX is geographically situated at the heart of the linen growning area,
where it is active in :
Trading of flax fibres for all industries all over the world: long scutched flax,
rescutched tow and hackled tow for traditional textile industry, paper industry,
automotive industry, etc...
Producing of prepared flax fibres for the spinning industry, produced in the
delocalised unit of Linolitas in Lithuania:
• Combed sliver for traditional half-wet flax spinning mills
• Combed sliver for the blending market (with PES, wool, etc...)
• Carded sliver
• Cotonised fibres for the blending market (with cotton, Rayon, etc...)
2. Belgium is the second biggest carpet producer in the world. PROCOTEX is the
innovative recycler company of all fiber wastes related to that industry such as PP,
jute, PES, PA wastes... Besides that, PROCOTEX is also serving the same carpet
industry by helping it to sell its second-hand equipment and stocklot yarns.
Back to homepage
PRODUCT ENGINEERING SERVICES
Zoning de la Rivièrette 65
7330 SAINT-GHISLAIN
Tel: 32-(0)65764040 – Fax: 32-(0)65764049
Email: [email protected] - Web: www.pes-sa.com
Contact person: Mr René DEMARBRE
PRODUCT ENGINEERING SERVICES (PES) S.A. provides complete robotics related
services to equip most industrial robots. Its activities are mainly directed to the
automotive sector, but also to industry in general.
In order to produce these robotics solutions, PRODUCT ENGINEERING SERVICES relies
on the skills of its international partners and incorporates the following products:







Tool changers. Partner: Applied Robotics
Collision sensors. Partner: Applied Robotics
Grippers. Partners: NKE and Robotiq
Finishing tools. Partner: AMTRU
Magnetic tools. Partner: Magswitch
Rotary unions. Partner: DSTI
Slip rings. Partner: Servotecnica
PRODUCT ENGINEERING SERVICES (PES) S.A. offers a complete range of in-house
services designed to meet its targeted customers’ needs including R&D, design,
engineering, manufacturing, quality control, integration and consulting.
Back to homepage
RADSYS
Rue de Soignies 200 B
7800 ATH
Tel: 32-(0)68456327 – Fax: 32-(0)68842028
Email: [email protected] - Web: www.radsys.eu
Contact person: Mr Marc MINON
Founded in 2008, RADSYS is a consulting firm specialized in sales, design, engineering,
manufacturing and audit services focused on radiation technology especially dedicated
for coatings on metals, papers, plastics, films or textiles involving process such as
drying, heating or curing.
We are active within the fields of Infrared, Ultraviolet radiation curing and Electron Beam
applications.
RADSYS comprises a team of senior professionals with extensive experience in metal
and other web processing industries, paint formulations, radiation process and in-depth
involvement in international project management around the world.
We can provide the following services:














Consulting to end users and to formulators
Technology Transfer
Technical audit and expertise of existing process
Energy efficiency surveys (heat efficiency improvement)
Inspection of coating applications
Process control improvement
Upgrades of existing processing line
Support for the design of new specific Radiation Curing equipment’s
Maintenance / Commissioning of Infrared and EB units
Spare parts supply for all Radiation Technologies (EB,IR and UV)
Resources Management
Training in Radiation Curing technologies
Start-up and commissioning services
Support on conformity to legislations and norms.
Back to homepage
RECTICEL
Zoning Industriel de Fleurus - Avenue du Marquis
6220 FLEURUS
Tel: 32-(0)71489252 – Fax: 32-(0)71489351
Email: [email protected] - Web: www.recticel.com
Contact person: Mr Claudio STRAZZANTE
The automotive business line includes the following two activities:
Recticel Automotive which develops, produces and commercialises interior solutions
(dashboard skins and door panel trim) on the basis of the unique, certified Colo-Fast®
spray technology
Proseat (a 51/49 joint venture between RECTICEL and Woodbridge) which produces
seating pads in cold moulded foam
In addition, there is still the small Exteriors division which mainly concentrates on the
production of the light-stable polyurethane raw material Colo-Fast® (compounds) that is
primarily used in the automotive division today.
RECTICEL AUTOMOTIVE
RECTICEL car interiors are extremely long-lasting and resilient, and an inspiration during
the whole life of a vehicle. Many years of experience and confirmation in serial
production are reflected in our components visible in the finest details. Even smalles
radii or light-coloured surfaces can be produced with a high level of quality, thus setting
the base for sophisticated interiors of perceptible perfection and functional durability.
Colo-Fast® is the base material for all interior components manufactured by RECTICEL
Automotive. As a result of a continuously improved production process and for the need
to respond to the permanently increasing demands in the automotive market, Colo-Fast®
as patented material has proven its excellence over many years, always setting
standards for high quality automotive components and thus gaining a leading position in
the market. Colo-Fast® delivers an optimal performance for sophisticated interiors in
terms of color, grain, function and dimensional stability. The advancement of Colo-Fast®
provides a weight reduction of 25 % compared to thermoplastic slush skin. With ColoSense® Lite weight reduction will be even more than 35%. The current status of
development is the creation of comfort foam with low density and partially thinner foam
layers maintaining its material properties.
The various components require dedicated production processes:



Spray technology in monotone and multi-tone
Reaction injection molding (RIM)
Reaction injection overmolding (ROM)
STRATEGY AND PROSPECTS: SHAPING THE FUTURE
INTERIORS: Stabilisation and improving cost-effectiveness
Over the last fifteen years, Recticel Automotive (previously known as Recticel Interior
Solutions) has made an important contribution to the growth of the automotive business
line with its unique patented Colo-Fast® spray technology.
As a consequence of the current, serious economic crisis which hit the automotive
industry hard, RECTICEL has had to adapt its ambitions for this sector. The revision of
the original plans was dictated by the considerable structural degree of risk of the
Automotive business line in the long term on the one hand and the extremely capital
intensive character of these activities on the other. Therefore the Group further modified
its position with regard to the automotive business line in the strategic practice of last
year.
Unlike in the past, the focus will no longer be on growth. In the short term, attention will
be focused on maintaining existing market positions, expansion to China and improving
global cost-effectiveness as priorities.
SEATING (PROSEAT)
The seating division which runs via the joint venture Proseat is also heavily exposed to
the new developments of the market. One of the most important challenges for this
division involves coming up with a suitable response to the increasing trend for
insourcing among suppliers in the automotive industry.
The production and commercialisation of pre-moulded solid foam seating for the
automotive industry has already been assured by the joint venture Proseat for a number
of years. RECTICEL has 51% control of Proseat and the Woodbridge (Canada) group has
49%.
Today it can be stated that Proseat, with its nine production plants spread over seven
countries, is one of the biggest independent producers of seating for the European
automotive industry. In addition to seating, Proseat also manufactures other seating
components such as headrests, armrests and side panels for car seats.
Back to homepage
RECTILUX
Grand’Rue 103
6724 MARBEHAN
Tel: 32-(0)63411115 – Fax: 32-(0)63411000
Email: [email protected] - Web: www.rectilux.be
Contact person: Mrs Françoise ANTOINE
Rectification of any engines gasoline and diesel








All the engines
Jacketing, bore and honing
Brace rectification
Cylinder head
Works in connecting rods, line of shaft of bearings and camshaft
Injection gasoline and diesel
Turbo
Brakes and clutches
Back to homepage
RECYCAR
Rivage de Boubier 25
6200 Châtelet
Tel: 32-(0)71243850 - Fax: 32-(0)71394281
Email: [email protected] - Web: www.groupecomet.com
Contact person: Mr Philippe GROSJEAN
The wide variety of activities undertaken by the Comet Group make it a centre for
environmental excellence on its reference markets: ferrous and non-ferrous scrap
metals, end-of-life vehicles, electrical and electronic equipment waste, household and
industrial packaging, tyres, plastic, shredding waste, etc.
End-of-life vehicles – or scrap vehicles – need environmental processing to avoid
environmental contamination or harm to human health caused by their various
components. With this in mind, the authorities have developed a network of accredited
companies which carry out the environmental processing of end-of-life vehicles.
These operations consist of three stages:



Depollution of the end-of-life vehicle: removal of any harmful components and
fluids from the vehicle: fuel, oils, oil filters, batteries, etc.
Dismantling of the end-of-life vehicle: operation aimed at dismantling certain parts
either for subsequent usage (as a part in its own right – door, engine, gearbox,
etc.) or for its recycling (tyres, exhaust, etc.).
Shredding of the end-of-life vehicle: shredding releases the various remaining
components in the vehicle for subsequent recycling as a secondary raw material:
iron, metals, plastics, minerals, etc.
Only the successful completion of these stages in the processing of scrap vehicles
guarantees effective and environmentally-friendly recycling.
RECYCAR and the COMET Group offer a comprehensive solution for processing end-oflife vehicles:

For partners responsible for the management of a range of end-of-life vehicles.



For accredited demolition companies seeking to legally continue their parts
reselling business, which can clean up end-of-life vehicles prior to dismantling
and any parts sales.
For depollution and dismantling centres seeking a recycler enabling greater
processing of end-of-life vehicles than they would be able to deal with
(COMETSAMBRE).
For shredders seeking to process their shredding waste (COMET TRAITEMENTS).
Back to homepage
REFRICAR
Zone Industrielle des Hauts-Sarts - Rue de l'Abbaye 140
4040 HERSTAL
Tel: 32-(0)42483417 – Fax: 32-(0)42482541
Email: [email protected] - Web: www.refricar.be
Contact person: Mr Thierry GAUDE
Cooling and air-conditioning of utility and other types of vehicle
Modifications and customization
Back to homepage
RESSORTS KESSEN
Rue de l'Hippodrome 148
4000 LIEGE
Tel: 32-(0)43430259 – Fax: 32-(0)43442737
Email: [email protected] - Web: www.kessen.be
Contact person: Mr Jacques ARTUS
The RESSORTS KESSEN, company located in Liege, is specialized in manufacturing all
types of industrial springs.
The company produces all types of compression springs, tension, torsion springs but
also curved and scrolled and manufactures parts like strip off the plates, washers, clips
and reels.
KESSEN product itself springs coiled hot rolled and cold springs. Our factory produces
single or springs in series. KESSEN springs are indeed specialized in the assembly of
parts and assembled son.
Leaf-springs and helical-springs
We offer re-arching of leaf springs for:
Cars, trucks and buses,
Civil engineering motors,
Rail coaches,
Overhauling on vehicles
Back to homepage
RESSORTS RENSON
Rue Sabaré 120
4602 CHERATTE
Tel: 32-(0)43456770 – Fax: 32-(0)43622454
Email: [email protected] - Web: www.ressorts-renson.be
Contact person: Mr Jos BODEN
RESSORTS RENSON SA has been in operation since 1932.
Our field of activity is the production, in small, medium and large series of:






Compression springs
Traction springs
Torsion springs
Parts with cut-out and cambered shapes
Flat or rounded diaphragms
Cutting washers and shaped parts
Efficient and responsive
Our stock of machines is one of the largest and most effective in the sector. Combined
with a know-how based on incomparable experience, this technical infrastructure
enables us to provide fast, creative and competitive solutions.
RESSORTS RENSON is located in Cheratte (nr Liege, Belgium), in buildings with a
surface area of over 3,000 m². With a direct link to motorway and flight networks, this
location gives us unequalled logistical flexibility.
Constancy in diversity
Our clients operate in a wide variety of fields: automotive, domestic electrical
appliances, lighting, telephony, hatches, gas, hydrogen…
Whatever their activity, we work closely with every client in an atmosphere of mutual
trust. Every order is monitored closely, from initial inquiry and quote submission to final
delivery. The ERP IT system at RESSORTS RENSON enables us to optimise traceability.
Our core business
Our core business involves cold working with 0.10 mm to 14 mm wire made from Steel,
Stainless Steel, Bronze, Beryllium Copper, Inconel, Monel, etc., mainly with round
section but also with square or rectangular sections.
RESSORTS RENSON is constantly striving to meet your most specialist requirements.
The demanding nature of your requirements guarantees a continually updated know-how
on our part, honed by cutting-edge technologies.
At the client’s request, we make prototypes to validate project development.
Back to homepage
LES RESSORTS WILFART
Rue Chanoine E. Martin 7 A
7520 TEMPLEUVE
Tel: 32-(0)69352180 – Fax: 32-(0)69353916
Email: [email protected] - Web: www.ressorts-wilfart.com
Contact person: Mr Régis WILFART
Springs
According to the diversity of the customers, industry in general that it is automobile,
pharmaceutical, printing works, agricultural, cement factory and other... The company is
directed towards the markets of small and average series while manufacturing the single
part.
Moreover, it provides so much to industries than with the private individuals while
respecting a service of quality.
Back to homepage
RIOGLASS BELGIUM
Avenue de l’Espérance 58
6220 FLEURUS
Tel: 32-(0)71822555 – Fax: 32-(0)71822550
Email: [email protected] - Web: www.rioglass.com
Contact person: Mrs BUSCEMI
Created in 1992 in Spain, RIOGLASS is a private-owned glass maker, independent from
any large glass groups.
After initially having supplied short and medium run vehicle manufacturers, RIOGLASS
has become a significant player in the European automotive glass market. We are
certificated by major car manufacturers and have ISO TS 16949 and other automotive
standards. By developing our own products, tools and even some manufacturing
equipment, we can service the automotive industry with great flexibility in glass
manufacturing from our plants in Spain and France.
Among the RIOGLASS facilities, Mieres and Bagneaux-sur-Loing sites are especially
dedicated to automotive industry and are capable of providing car manufacturers with a
large production capacity in tempered and laminated glass.
The Bagneaux-sur-Loing plant, installed in 2006, is equipped with fully automatic
production lines for backlights and sidelights. Additionally, an “added value unit” enables
us to “dress” glass parts by fitting a large variety of accessories, in order to provide
complete subsets which can be directly integrated onto car bodies, as requested by car
manufacturers for their present or future projects. This line is made up of independent
workshops that utilize technologically advanced equipment and tools for applications
such as extruded rings for waterproof seals, attachments of stop light brackets, moisture
and light sensors, as well as locator pins, spacers and other fittings.
The first RIOGLASS Plant was built close to La Rioja capital city (Spain) and was
dedicated from the very beginning to supply specialty glasses for a variety of vehicles
such as buses, rail and tram cars, construction plant, micro cars, and many other types
of small series vehicles. RIOGLASS is the world leader in short runs product
development.
RIOGLASS professionals are fully committed to ensuring Quality and Service to
customers at all levels of development, production and marketing. Plants are equipped
with technologically up-to-date tools that allow sophisticated measurements of all
aesthetic, optical and physical criteria. Beyond this equipment, Quality commitment is
strongly supported by RIOGLASS staff skills, throughout the Group. Daily, they
contribute to provide our customers with products that fully meet their requirements and
demands.
Back to homepage
Zone Industrielle d’Heppignies - Zone II - Rue de Capilône 1
6220 HEPPIGNIES
Tel: 32-(0)71377707 – Fax: 32-(0)71377708
Email: [email protected] - Web: www.rtec.ws
Contact person: Mr Fabio LAZZERINI

Design, fabrication development and rebuild of Shock absorbers for special
vehicle application
o
o
o
armoured vehicles and jeep
Circuit, rally, raid motorsport vehicle suspension
Reinforced vehicle suspension


Manufacture of prototype vehicles (special and competition cars)
Engine testing and calibration

o
o
o
Shock absorbers
Prototype vehicles
Engine development
Main customers: Carat Duchatelet, Centigon, Gilet Automobile, Fiat Auto Corse (Abarth,
N technology), Overdrive, WR Audi, Peugeot Sport, Citroën Sport, Renault Sport
Back to homepage
SADAPS BARDAHL ADDITIVES & LUBRICANTS
Rue du Mont des Carliers 3
7522 BLANDAIN
Tel: 32-(0)69590360 – Fax: 32-(0)69590361
Email: [email protected] - Web: www.bardahlfrance.com
Contact person: Mr Dominique LEPLAT
ISO 9001 and ISO 14001 certified company specialising in chemical and oil products for
the motor industry, industry, DIY and the motorbike industry such as: additives, oils, fuels
and cooling systems, special lubricants, maintenance products for industrial and car
workshops, windscreen washer fluids, coolants, maintenance and air-conditioning
products.
•
•
Laboratory with 3 chemists.
Products developed: windscreen washer fluids, oil and fuel additives, car
maintenance products.
Back to homepage
SAINT-GOBAIN GLASS BENELUX
Rue des Glaces Nationales 169
5060 AUVELAIS
Tel: 32-(0)71261211 – Fax: 32-(0)71261293
Email: [email protected] - Web: www.saint-gobain-vitrage.com
Contact person: Mr Claude DENIET
Saint-Gobain Vitrage manufactures, processes and sells glass products for many
different markets: the car and transports industries, the building trade, the furnishing,
the electrical goods and the electronics industries.
Saint-Gobain Vitrage is the designation of the Flat Glass Division of the Saint-Gobain
Group. The Flat Glass Division manufactures, processes and sells glass products. Our
markets and our customers have governed the organisation of the Group into four units:
Saint-Gobain Glass, specialising in the manufacture of basic glass products: from float
glass to high-performance products also including mirrors, printed glass and laminated
glass.
Saint-Gobain Glass Solutions, a network of companies dedicated to the building trade,
processing, distributing and installing glass for numerous applications.
Saint-Gobain Sekurit, a leader in the car and transports industry sectors, whom they
supply with functional glass (visual, thermal and acoustic comfort; anti-ejection and antiburglary security) assembled on the automotive constructors lines.
Saint-Gobain Specialities covers the electronics and electrical goods industries, from
commercial refrigeration to fire protection and nuclear safety.
Back to homepage
SERVIPLAST
Rue du Marché Couvert 42
6600 BASTOGNE
Tel: 32-(0)61240670 – Fax: 32-(0)61240671 – Mobile: 32-(0)495246092
Email: [email protected] - Web: www.serviplast.be
Contact person: Mr Philippe MARTIN
SERVIPLAST: plastic injection and assembly
Today SERVIPLAST is a cooperative company with a social purpose, essentially active in
assembly and plastic injection.
In this sector, SERVIPLAST is positioned as a main partner for any company that is
developing an idea or project for which the production of a plastic part is essential.
SERVIPLAST becomes the project manager for the application under development and
actively participates in the design and production of the desired product. Its services
therefore cover various upstream and downstream phases, such as preliminary studies
and project validation, parts design, the design and manufacture of the injection mould,
injection and pre-production, finishing (painting, printing, hot marking...), not forgetting
assembly and packaging.
Motivated by the desire to create a product that meets the customer’s expectations,
SERVIPLAST is involved in all types of project. Each stage is validated and discussed in
close collaboration with the various participants. Adaptation to technological
developments through constant and targeted investment means that the company is able
to ensure a high degree of rigour under the control of a total quality process (the
company is certified by Veritas - ISO 9001 and ISO 14001).
SERVIPLAST works in close collaboration with tool consultants as well as with SIRIS and
competence centres specializing in special techniques.
Back to homepage
SETTAS (DONCASTERS) - SOCIETE EUROPEENNE DES TECHNOLOGIES
DU TITANE ET DES ALLIAGES SPECIAUX
Zone Industrielle - Allée Centrale 36
6040 JUMET
Tel: 32-(0)71919210 – Fax: 32-(0)71345611
Email: [email protected] - Web: www.doncasters.com
Contact person: Mr Axel LUCKOW
DONCASTERS Group Ltd is a leading international engineering group that manufactures
precision components and assemblies for the aerospace, industrial gas turbines,
specialist automotive, petrochemical, construction, industrial, transportation and
recreation markets. The group excels in working with alloys and metals that are difficult
to shape and form.
DONCASTERS possesses many unique industry leading technological and
manufacturing skills that are very highly regarded by our customer base. We are in
virtually every respect global leaders in aerospace, industrial gas turbines, automotive
turbochargers, fasteners and super alloys. All are household names within their
respective industries and highly demanding as regards problem solving, time to market
delivery, costs and through life support.
Leveraging the synergies of our super alloy manufacturing, casting, forging, fabrication,
machining and assembly capabilities, DONCASTERS is in a unique position of being able
to offer an in-house, vertically-integrated Supply Chain solution for our customers.
In automotive the company is a leading supplier of turbocharger components to
BorgWarner, Holset, Honeywell and IHI as well as fasteners and stampings to the likes of
General Motors, Volkswagen and Audi. We also supply a range of specialist fasteners,
gear components and assemblies to civil, military and commercial customers across the
transportation field.
Back to homepage
SHUR-LOK INTERNATIONAL
Parc Industriel
4800 PETIT-RECHAIN
Tel: 32-(0)87320775 – Fax: 32-(0)87320712
Email: [email protected] - Web: http://shur-lok.com
Contact person: Mr Bertrand FORET
SHUR-LOK INTERNATIONAL S.A. was founded in 1965 to design and manufacture
fasteners for the European market. Built in 1988, the present 43,000 sq. ft. (4,000 sq.
meters) facility is in Petit-Rechain, Belgium. Centrally located to satisfy the requirements
of the dynamic European aerospace community, SHUR-LOK INTERNATIONAL is fully
staffed and equipped to design, manufacture and support the sale of SHUR-LOK
products
Innovative fasteners for special applications
When ordinary fasteners won't do, SHUR-LOK is an extraordinary resource. An
experienced engineering team specializes in advanced technologies, consistently
exploring new structural materials and solving the toughest application problems. SHURLOK has numerous firsts and patents to its credit, and many of its products have gone on
to become industry standards. SHUR-LOK welcomes custom design challenges as an
opportunity to push the envelope and create the standards of tomorrow.
SHUR-LOK fasteners and components are designed to satisfy customer requirements in
two general application ideas: secondary structures, such as interior stow bins,
lavatories and galleys, and primary structures, such as aircraft engines, engine pylons,
landing gears, wings, gearboxes, transmissions and helicopter rotors--all critical
applications.
Back to homepage
SIMA
7700 MOUSCRON
Tel: 32-(0)56856200 - Fax: 32-(0)56856201
Email: [email protected] - Web: www.sima.be
Contact person: Mr Kurt HAVEGEER
The SIMA-SACA group produces a variety of products connected with paint processing
and surface treatment.
SIMA is a leading manufacturer, at an international level, of spray- and drying booths for
body shops and industrial painting lines.
Quality and reliability are the major features of the SIMA spray booths. SIMA products
are CE and TUV approved as well as recommended by prestigious automobile
manufacturers and paint companies.
The purpose of this catalogue is to give you a visual impression of SIMA's expertise
offered in different applications.
Back to homepage
SIMONIS PLASTIC
Rue Bonne Fortune 102
4430 ANS
Tel: 32-(0)42398833 - Fax: 32-(0)42398831
Email: [email protected] - Web: www.simonis-plastic.be
Contact person: Mr Luc SIMON
SIMONIS PLASTIC is an industrial partner




Project manager specialising in the transformation of polymers by injection
Equipped with an efficient injection shop, complementary activities and purposebuilt environment for the manufacture of engineering products and microsystems
With a multi-disciplinary team for research on innovative solutions customized to
the client's requirements
Contributing a great competence and added value to projects developed in
partnership with the client
SIMONIS operates in the field of plastics processing, and works for the automotive
industry. It makes specific products such as trim panels or inflatable seals in small and
medium-size production run. The speed of action and the responsiveness of the
personnel enable it to provide quality products. In addition, its twenty years’ experience
in the field of civil engineering enables SIMONIS Group to work for the largest companies
in this sector. The Group is thoroughly familiar with all the materials it uses, and handles
the conversion of metal to plastic. It is capable of producing in very small series,
providing a high-quality service corresponding to the specific requirements of the sector.
Back to homepage
SIMTECH
Rue de la Grande Couture 14
7503 FROYENNES
Tel: 32-(0)69889670 - Fax: 32-(0)69889677
Email: [email protected] - Web: www.simtech.be
Contact person: Mrs Pascale MALICE
For you, Racecar manufacturers, SIMTECH designs, manufactures & supplies custommade flexible fuel tanks (FIA approved) & comprehensive accessories around the fuel
cells.
Our flexcell® range of products include flexible cells for the storage of any kind of liquids
(water, potable water, fuels, etc.). Our fuel cells can be designed for the most aggressive
fuels; we also offer turnkey solutions with integrated accessories: fuel pumps, level
sensors, filters, inner catch-tanks, wiring, filler caps, vent valves, filler hoses, etc.
We offer a special confection integrated into composite body shell for volume
optimization, light weight & ease of use.
For you, Defence Vehicle manufacturers, SIMTECH manufactures complete fuel tanks
with fuel-leakage tank protection on OEM tanks with self-sealing properties in case of
bullet perforations. The complex self-sealing sandwich can be applied on various tank
materials: PE, aluminium, glass fibre or other composite materials...
For you, Automotive Glass manufacturers, SIMTECH also designs & manufactures
comprehensive custom-made laminating solutions within its flexlam® range of products
including reusable vacuum bags for the laminating process of windshields & other
automotive glass (sidelights, panoramic sunroofs...), our products are designed to suit
your laminating process.
Should you require any custom designed fuel cells or reusable vacuum bags for your
laminating process, we will be pleased to receive your requirements.
Back to homepage
SKYNAM
Rue des Anciens Combattants 1
5032 MAZY
Tel: 32-(0)81408689 – Fax: 32-(0)81408683
Email: [email protected] - Web: www.skynam.com
Contact person: Mr Stéphane BEAURAING
Electronic technology for the car and transport sector, an SPRL with capital of 50,000
euros, 8 staff, 20 years of R&D and manufacturing, technical support and after sales
service experience.
Activity: design, prototyping and manufacture of electronic microprocessor boards,
development of operating software for these systems and PC software for configuring
and managing these systems.
Private clientele, replacement and manufacturers parts
• Petrol and diesel engine Electronic Control Units (production and competition).
• Hybrid traction supervisors.
• Electronic exhaust management, particle filters and pollution control.
• Data recording.
• Fleet management and control.
• Custom developments.
Back to homepage
SOCIETE COMINOISE DE MAILLE INDUSTRIELLE (SOCOMAILLE)
Avenue des Châteaux 7
7780 COMINES-WARNETON
Tel: 32-(0)56561200 - Fax: 32-(0)56556121
Email: [email protected] - Web: www.socomaille.be
Contact person: Mrs Laurence VANHOVE
SOCOMAILLE had been knitting jersey and interlock as supports for coating. Most of
these coated fabrics are destined for the automobile industry (lining of seats and inside
body roofs) but also for the luggage and garment industries.
As time went by, SOCOMAILLE added ranges of jersey fitted sheets to its product range,
directing itself towards the household linen market. In this area, the company’s annual
capacity is well over one million fitted sheets.
From cotton, polyester/cotton, 100% polyester and polyamide, the supports are knitted
on circular knitting machines. The company, which is fully integrated, carries out all the
finishing work such as dyeing, heat setting, compaction, the different forms of stentering,
etc. With respect to supports for industry, SOCOMAILLE makes over 100 tonnes of
finished pieces of knitted fabric per month.
Back to homepage
SOGELUB
Zoning Industriel de Tournai Ouest I - Rue de la Terre à Briques 13
7522 MARQUAIN
Tel: 32-(0)69590949 - Fax: 32-(0)69214474
Email: [email protected] - Web: www.sogelub.com
Contact person: Mr Benoit DECOTTIGNIES
For more than 35 years, our mission has been to develop and manufacture industrial
lubricants designed for extreme applications:




high and low temperatures, thermal chocks
aggressive atmospheres (pH-values, industrial water, etc.)
heavy loads, mechanical chocks
high speeds
For over 20 years, the SOGELUB® lubricants have been acknowledged by:



Large car manufacturers,
Large tyre manufacturers,
Subcontractors in the automotive industry.
Several applications:


Cataphoresis chains in the automotive industry: resistant to high temperature,
compatible with the paints used, controlled evaporation,
Bearings and conveyor mechanisms in the assembly area.
The following can be found amongst our most widely used products:


Greases STABIGREASE® and MD 466 EP,
High temperature oils R 660, R 695 and R 800
Back to homepage
SOTEBA
Rue Buisson aux Loups 5
1400 NIVELLES
Tel: 32-(0)67493144 - Fax: 32-(0)67217955 – Mobile: 32-(0)473658899
Email: [email protected] - Web: www.soteba.be
Contact person: Mrs Valérie KREPS
SOTEBA is active in the field of hydraulic and pneumatic waterproofness. We work
mainly for different industries but also for the sectors of the aeronautics, the navy, the
farm-produce industry, the chemistry and the automobile sectors.
We propose a wide range of goods of waterproofness, technical components and
industrial products, in collaboration with groups such as Hutchinson and The French
Joint.
Back to homepage
SPEED-UP – P-TRONIC
Préfayhai 33 D
4900 SPA
Tel: 32-(0)87305670 - Fax: 32-(0)87305671 – Mobile: 32-(0)487528358
Email: [email protected] - Web: www.ptronic.com
Contact person: Mr Philippe HEEREN
P-Tronic manufactures and markets additional electronic performance chip which
improve the performance of all types of diesel-engine and petrol vehicles equipped with a
turbo: TDI, CDI, HDI, JTD, CRDI, D4D, DTI, TDCI, D, TDS, SDI, DCI, TD, TID, DES...
These plug-in power engine tuning enable power to be increased by 25 % and torque by
35% on average, in perfect safety, while also decreasing fuel consumption by around
15% and lengthening the life of the engine.
Equipped as standard with connectors identical to those of the car manufacturers, the
additional P-Tronic box-units engine tuning are fitted in just a few minutes without any
experience at all being required. Recognised for their quality, P-Tronic box-units are
guaranteed 5 years and have received European TÜV certification.
Back to homepage
SPYTANK
Boulevard Initialis 7/5
7000 MONS
Tel: 32-(0)65394350 - Fax: 32-(0)65394359 – Mobile: 32-(0)473964300
Email: [email protected] - Web: www.spytank.eu
Contact person: Mr Ali BENNIS
SPYTANK products optimize the security and the management of your trucks’ tanks. Our
innovative fuel caps provide a complete protection against robbery and misappropriation
of fuel. SPYTANK caps can also feature a fuel monitoring system and communication
tools to make your fleet management easier!
As fuel represents the biggest expense of a transport company, it is now more urgent
than ever to be concerned about it.
Products:
Spytank "Protect" Model
Spytank "Call" Model
Spytank "Locate" Model
Spytank "Level" Model
Back to homepage
SURAIN
Rue de l’Innovation 7/3
7503 FROYENNES
Mobile: 32-(0)471789930
Email: [email protected] - Web: www.surain.eu
Contact person: Mr Benjamin SURAIN
Electro cycles
Back to homepage
SYREG
Avenue de la Résistance 188
4630 SOUMAGNE
Tel: 32-(0)43771052 – Fax: 32-(0)43776933
Email: [email protected] - Web: www.syreg.com
Contact person: Mr Eric COLLAS
SYREG’s basic product is SYRMGC. This is a versatile and multi-function module for
measuring temperature, acceleration and has a 0-10V input. It manages digital I/O
controls and outputs an analogue 0-10 V voltage and a current of 0-20 mA that can be
programmed according to the sensors. Overall supervision is via an application
integrated into the module.
SYREG has developed the following derivative products:
• GERAF which provides centralized management of heating depending on the
occupation of the premises with remote supervision via the Internet.
• TGMAC which controls the real time operation of industrial machines (drills, cutters,
etc.). In this way, it offers a management tool for improving productivity.
• GEDIR which optimizes boiler regulation circuits controlling the three-position valve.
Settings can be configured via a graphical interface.
All the products developed can be connected via a cabled network or by radio
frequency. They send and recover data via a LAN network or WIFI.
SYREG has developed the following graphical products:
• Graphical programme for displaying the configuration of the SYRMGC module with a
summary of measurements and digital controls via the network.
• A programme to configure time slots depending on occupation of the premises.
• A programme to give details of the heating of a building with a graphical display
showing temperature changes, window opening, heating times, fuel consumption, etc.
• A programme displaying machine tool production via a histogram with preventive
maintenance and management of workers depending on the machine.
• A programme to display a graph of boiler room regulation.
R&D is a permanent feature at SYREG, meaning that products can be developed rapidly
according to needs. SYREG is developing specific application programmes for its
products. In the case of the SYRMGC, GERAF, TGMAC and GEDIR products, the
application is incorporated into the module and run from a web browser.
Main references
The electricity companies use SYRMGC modules for sending and recovering data
concerning the management of electrical control consoles.
GERAF modules equip several local authority buildings, hotels and retirement homes and
are used for centralized management of central heating and air-conditioning systems
according to the occupation of the premises.
TGMAC modules equip several engineering companies and are used for monitoring
production in order to improve productivity.
Back to homepage
T&B CARBON MANUFACTURING
Parc Industriel des Cahottes - Chemin des Moissons 12
4400 HORION-HOZEMONT
Tel: 32-(0)43689460 – Fax: 32-(0)43689560 – Mobile: 32-(0)475858255
Email: [email protected] - Web: www.tb-carbon.com
Contact person: Mr Georges TONET
T&B CARBON MANUFACTURING is a leader in the creation and production of high
quality carbon and wooden laminated parts for car interiors.
The quality of our products satisfies the demanding owners of the world’s most exclusive
motorcars. T&B has developed extensive product lines for the likes of Ferrari,
Lamborghini and Porsche. We also produce products for non-automotive fields including
computer accessories, cigar lighters and household goods.
T&B is a wholesale and retail manufacturer that can handle any size job from small,
single item custom work to large production (20 cars per week) runs. Our computerized
ordering and production process ensure smooth communication and on-time delivery of
all orders. Please contact T&B's European sales office in Belgium.
All logos (ie: Porsche, Ferrari, and Lamborghini) used are for information purposes only,
and T&B is in no way affiliated with the respective companies.
Back to homepage
TAILORED BLANK LIEGE – ARCELOR MITTAL GROUP
Rue de l’Avouerie 7
4000 LIEGE
Tel: 32-(0)42545050 – Fax: 32-(0)42545060
Email: [email protected]
Web: http://automotive.arcelormittal.com/tailoredblanks
Contact person: Mr Francis LEDRICH
Active in cutting shaped, rectangular and trapezoids blanks for structural or visible parts
of cars.
A 1.250 T mechanical press and Fimi line, with a maximum width of 1.850 mm for high
grade steel.
Fagor 2.500 T hydraulic press for hot rolled steel
Back to homepage
TECHNOVAL
Rue de la Station 25
4340 AWANS
Tel: 32-(0)42634558 – Fax: 32-(0)42638115
Email: [email protected] - Web: www.technoval.be
Contact person: Mr Francesco LIPAROTI
General mechanical construction and precision construction
Finishing: lathe work, milling, grinding, boring, threading...
Study and production of:



Industrial machines and equipment’s.
Mechanical and welded units.
Hydraulic and pneumatic systems.
Manufacturing of injection moulds.
Surface treatments:




Exothermic projection.
Ultrasonic projection.
Electric welding.
Plasma welding.
Preventive assisted industrial maintenance.
Back to homepage
TECNOLON WORKS
Rue du Forest 5
7700 MOUSCRON
Tel: 32-(0)56857548 – Fax: 32-(0)56857549 – Mobile: 32-(0)476992366
Email: [email protected] - Web: www.tecnolon.com
Contact person: Mr Geoffrey DUCROCQ
Know-how in precision
Since several decades, TECNOLON WORKS controls the perfect machining of various
mechanical tools and components for all kind of industries. In order to achieve this goal,
TECNOLON WORKS makes use of machines of the last generation.
Production of injection moulds
Production of injection moulds for plastics for more than 40 years, very competitive
machines and equipment’s, all kinds of production or modifications of injection moulds
are possible thanks to our engineering department, equipped with the most modern softand hardware.
First out-of-tool series can be provided.
Back to homepage
TECNOLUB
Zur Kaiserbaracke, Recht 4
4780 SAINT-VITH
Tel: 32-(0)80679559 - Fax: 32-(0)80678346 - Mobile: 32-(0)475620539
Email: [email protected] - Web: www.tecnolubsystem.com
Contact person: Mr Jean-Marc BRICTEUX
Are you searching for a specialist in industrial lubricants and high-performance solutions
for micro-lubrication and/or processing of metal turnings?
TECNOLUB is a company specialising in consulting, analysis, design, construction and
implementation in the following fields:



Industrial lubricants
micro-lubrication
treatment of metal turnings
Since 1988, TECNOLUB has been developing global concepts both for and with its
clients, always with respect for mankind and the environment.
TECNOLUB offers durable solutions with state of the art technology.
TECNOLUB proposes a range of micro pulverising systems, adapted to different
applications.
A number of specialised press articles showing case studies where TECNOLUB’s micropulverising systems have proved their high level of performance.
Back to homepage
THERMO-CLEAN WALLONIE - FRANCE NORD
Chemin de Malplaquet 6
7822 GHISLENGHIEN
Tel: 32-(0)68268870 - Fax: 32-(0)68659179
Email: [email protected] - Web: www.thermoclean.be
Contact person: Mr Jessie VANTHIENEN
Activities/products:
The cleaning of machine parts and accessories polluted with organic contaminations like
paint, plastic, rubber, food remains, oil and grease is work for a real expert. The ThermoClean Group is one of the biggest players in the industrial cleaning market, specialised in
removing all kinds of pollution to recover your valuable machine parts and components.
The large capacity of the Group ensures a very short delivery time during maintenance
work.
Key markets: Paint industry, automotive industry and suppliers, plastic industry, food
industry, refineries
References: Renault MCA, Total, Frauenthal, S N W M, Valeo, CNH, Man Orga, Inéos,
Bostik
Back to homepage
THISE
Rue Neuville 17
4690 BOIRS
Tel: 32-(0)42861470 – Fax: 32-(0)42864889
Email: [email protected] - Web: www.thise.be
Contact person: Mrs Martine MARCHAL
Since two generations, we endeavour to meet the requirements of our customers by
improving our quality unceasingly. Personnel highly qualified, conscientious and tested
as well as equipment with the ridge of technical progress guarantee to us a honourable
place within the market of the mechanics of precision.
Our products result from our knowledge to make in milling, turning, correction,
metrology and sawing for parts of mechanics of precision or tools end. We work primarily
on unit parts or small series.
We work all types of materials on our various machines with numerical controls for small
series or single parts. In addition to the realization of parts, we take very precise
measurements thanks to our very powerful material of metrology.
Efollows to the installation of one followed quality, we are certified AECMA EASE
(European Aerospace Supplier Evaluation). This standard, much more strict than the ISO
approval, is an international recognition to know to make and of quality, guaranteed for
you of a neat and precise work.
Having initially acquired great experience in the field of the armament, a sector which
occupied an important place of industry inhabitant of Liège, our company was brought
with the passing of years to widen considerably its sphere of activity, parallel to the
request of increasingly diversified and specialized customers, seeking an effective and
sure subcontracting with which to entrust work increasingly more pointed.
From now on, our sphere of activity extends to the following sectors:



Equipment of machines.
Special cutters and tool holders for throwaway pads.
Standard tool holders.


Aeronautics (components for the program ARIANE 5).
Car (equipment of assembly lines).
Back to homepage
TI GROUP AUTOMOTIVE SYSTEMS
Au Wérihet 63
4020 WANDRE
Tel: 32-(0)43459555 - Fax: 32-(0)43629857 - Mobile: 32-(0)479910354
Email: [email protected] - Web: www.tiautomotive.com
Contact person: Mr Jean-Philippe LEONARD
Fluid thinking™ shapes the mindset of TI Automotive. Global automotive manufacturers
turn to TI Automotive for insight and focus to develop industry-changing, award-winning
fluid storage, carrying and delivery technology. With 18,500 employees at 130 locations
in 28 countries, our strength lies in our ability to creatively meet and exceed the
increasing fuel economy and emissions regulations of tomorrow’s auto industry.
Fluid Carrying Systems
Building on nearly 100 years of experience, the TI Automotive Fluid Carrying Systems
Division designs and manufactures fluid-carrying systems that meet the complex
assembly, design and performance challenges of the automotive industry, including:








Fuel lines
Brake lines
Tank top lines
ABS/ESP Bundles
Heated SCR Lines
Vacuum booster lines
Brake and fuel bundles
Exhaust treatment lines
Our expertise embraces the development and manufacture of multilayer low-permeation
plastic tubes, high-pressure steel double-wall and single-wall tubes, quick connectors
and flexible lines. To meet the demanding requirements of the modern automotive
industry, TI Automotive has developed specialty internal and external coatings designed
to withstand corrosion, abrasion and other environmental hazards.
Our global manufacturing presence serves all the established markets as well as the
newly developing markets around the world. This global manufacturing presence
combined with our global technical development centers enables us to provide an
unrivaled level of service to the global automotive industry from design to manufacture to
just-in-time delivery.
Product Highlights
Systems that combine and integrate high-performance materials and components such
as:





Double-wall steel tubing that can be combined with an extensive range of
anticorrosion/antiabrasion coatings such as NyAl (aluminum and polyamide
coating) NyZinc (Zinc and polyamide coating), NyGal (Galfan and polyamide
coating), PVF and many others. These tubes can be provided with a polypropylene
jacket to provide outstanding abrasion resistance.
Single-wall steel tubing with the same coating range as double-wall tubing but
with the addition of a nickel-coated internal diameter to withstand the corrosive
environment provided by modern-day fuels.
Multi-layer nylon tubing with a range of permeation barriers and high-temperature
capabilities.
Easy-to-assemble Quick Connectors that form an integral part of the overall fuel
system through the use of spin-welding joints.
Heated nylon tubes for use in Selective Catalytic Reduction systems for NOx
reduction.
Powertrain Components
The TI Automotive Powertrain Components Division develops products that contribute to
the improvement of fuel economy, performance and emissions. Our growing product
portfolio includes a range of innovative, cost-effective components for fluid storage and
transfer in engine, transmission, turbocharger and oil systems, including:












Gasoline Direct Injection (GDI) lines and rails
High-Pressure Diesel (HPD) lines and rails
Exhaust treatment tubes and pipes
Engine oil feed and return lines
Vacuum and ventilation tubes
Heating and cooling lines
Power steering tubes
Transmission tubes
Turbocharger lines
Engine oil screens
Engine oil gauges
Airbag tubes
Tank Systems
TI AUTOMOTIVE’s Fuel Tank Systems Division develops and manufactures innovative,
award-winning fuel tank systems for diesel, gasoline and flex-fuel applications. TI
Automotive fuel tanks improve fuel system performance and are engineered for a wide
range of packaging options, reduced evaporative emissions and low weight.
Products include:






Plastic fuel tanks for gasoline, diesel and flex-fuel vehicles
Plastic fuel tanks for Low Emission Vehicles (LEV)
Plastic fuel tanks for Partial Zero Emission Vehicles (PZEV)
Fuel tank systems for hybrid applications
Delivery and return components
Fuel filler tubes
Product highlights
Plastic fuel tanks from TI Automotive are setting new standards in lightweight, advanced
packaging technology with emissions levels at, or better, than steel. They are also
corrosion free and incorporate unique slosh noise-prevention technology, added
durability and reliability capabilities. Leveraging our global supply footprint, TI
Automotive has been a leader in integrating designs and manufacturing processes for
zero-emission vehicles.
Integrated construction with fuel system components sealed inside, feature the lowest
permeation levels of any plastic tank on the market today.
Pump & Module Systems
TI AUTOMOTIVE’s award-winning pumps and modules for gasoline, diesel and flex-fuel
vehicles are designed for quiet, efficient, low-voltage performance and unsurpassed
durability. We offer a comprehensive line of reliable pumps and modules designed to
handle economy-enhancing high-pressure fuel systems.
Products include:





Pumps
Modules
Electronics
Contact resistive, noncontact piezo and sealed level sensors
Additive dosing systems
HVAC Fluid Systems
TI AUTOMOTIVE’s HVAC Fluid Systems Division provides a complete portfolio of fluidcarrying products designed for lightweight, cost-effective, durable performance.
Our complete line of HVAC carrying systems includes:




Air-conditioning tube and hose assemblies
Accumulators and receiver dryers
Coaxial or tube-in-tube assemblies
Heater and radiator hoses
Through the use of innovative materials and size options, TI Automotive HVAC Fluid
Systems products reduce noise, boost efficiency and provide innovative solutions to
meet the latest refrigerant regulations.
Aftermarket
TI Automotive brings the same level of innovation, quality and performance to its
aftermarket products that it does for original-equipment product. That’s why the
aftermarket industry’s leading brands turn to TI Automotive for the most complete
offering of true, OE-quality fuel system replacement parts.
Back to homepage
TINT-TECH
Zone artisanale de la Rivièrette 4
7330 SAINT-GHISLAIN
Tel: 32-(0)65590900 - Fax: 32-(0)479205021 - Mobile: 32-(0)479205021
Email: [email protected] - Web: www.tinttech.be
Contact person: Mr Serge BASTIN
TINT-TECH is the European leader of the professional treatment of the automobile
glazing.
Back to homepage
TRAXXEO
Fond Jean Pâques 6 D
1348 OTTIGNIES-LOUVAIN-LA-NEUVE
Tel: 32-(0)10455425 – Fax: 32-(0)10816366
Email: [email protected] - Web: www.traxxeo.com
Contact person: Mr Gaétan PEETERS
TRAXXEO develops and sells geo-location software based on GPS technologies, making
it possible to locate, monitor and control various designated vehicles and plant, to record
this data, and subsequently to preserve it, look it up and print it. The purpose of this is to
improve profitability and reduce operating costs for our customers.
Sectors of activity: specialization in “site” businesses (public works, construction,
electricity companies, installations, others...), transport (sub-contractors, own fleet,
coach operators...).
•
•
•
•
•
•
•
Specially developed for the construction sector.
Day to day management of vehicles, plant and people on sites.
High performance management of mobility of workers/employees and
analysis of the CO2 tax applicable to the whole vehicle fleet.
Interface with all types of GPS hardware.
Real time display of the fleet on a map.
Summary reports on demand.
Mobile 2 Work: PDA application for creating and managing.
Back to homepage
TREVIRA BELGIUM
Rue Georges Mauroy 10
7970 QUEVAUCAMPS
Tel: 32-(0)69590307 - Fax: 32-(0)71347399
Email: [email protected] - Web: www.trevira.com
Contact person: Mr Jean-Marie NAMUR
From the fibre and flat filament yarn through to dyed textured yarns, TREVIRA is the only
supplier in the world that offers the complete range of textile polyester products from the
one source.
We offer high-value staple fibres and filament yarns for all textile applications, from home
and contract textiles, automotive textiles and apparel, to hygiene products and technical
applications.
Fibres
A comprehensive range of special fibre types for ring yarn, woollen yarn, worsted and
cotton spinning, as well as for nonwovens
Filaments
A comprehensive range of filament yarns, from 22 to 4000 dtex.
Our products are noted for their permanent functional properties. Our numerous
specialities form one of the most comprehensive product ranges for fibre and filament
yarns.




TREVIRA fibres and yarns are low-pill, microfine, elastic, breathable, flame
retardant or antimicrobial, depending on the requirements of the end product. In
many instances several additional functions are combined in the one fibre/yarn.
We offer special fibres for all textile applications, for use 100% or in blends with
wool, cotton and other materials, as well as for nonwovens and technical
applications.
These are accompanied by a brand that is internationally known and by quality
that is tested, both underpinned by the security of our trademark contracts.
Our raw material polyester is not only friendly to the environment in its
manufacture, but in all downstream stages of processing. All TREVIRA fibres and
filaments bear the Oeko-Tex Standard 100 Certificate.
Back to homepage
TRIPY
Faubourg de Bruxelles 320
6041 GOSSELIES
Tel: 32-(0)71347490 - Fax: 32-(0)71347399 - Mobile: 32-(0)475520114
Email: [email protected] - Web: www.tripy.be
Contact person: Mr Jean-Christophe SPRIMONT
The GPS for memorable trips
Tarmac-burning bikers, off-road addicts and lovers of stylish classic cars, put your trust
in the TRIPY II GPS and experience the rides of your dreams. With TRIPY, the route
always takes priority over the destination.
Back to homepage
TUNINGBOX
Ruthier 1
4950 FAYMONVILLE
Tel: 32-(0)80678372 - Fax: 32-(0)80678766 – Mobile: 32-(0)495528372
Email: [email protected] - Web: www.tuningbox.com
Contact person: Mr Didier HERMANN
Original TUNINGBOX: innovative since 1996
Power and economy for your engine
The TUNINGBOX ® unit enhances the performance of your turbo diesel engine, from 25 %
to 30 % (power and torque) and also reduces consumption by up to 10 %. The installation
is very easy; you connect a little module between the original calculator and the injection
system of your car.
TUNINGBOX ® is equipped with connectors identical to those used by the
manufacturers. This allows a fast and efficient connection without cables cutting and
resoldering. So, if you wish to take out the additional unit, you can do so by using simple
plugs. It leaves no trace on the engine, or in the computer memory of the vehicle.
By operating within the manufacturers’ tolerance limits, TUNINGBOX ® does not in any
way reduce the life span of the engine or other organs of your car.
TUNINGBOX ® is developed in a high-performance development centre and distributed in
over 30 countries.
Back to homepage
UDF AUTOMOTIVE BELGIUM
Rue de Fexhe Slins 65 B
4680 HERMEE
Tel: 32-(0)42899900 – Fax: 32-(0)42899909
Email: [email protected] - Web: www.udf.be
Contact person: Mr Vincent DI CARLO
Brakes
Back to homepage
UNIVERSITY OF LIEGE – LTAS – ENGINEERING AUTOMOTIVE RESEARCH GROUP
Chemin des Chevreuils 1
4000 LIEGE
Tel: 32-(0)43669194 - Fax: 32-(0)43669159
Email: [email protected] - Web: www.ltas.ulg.ac.be/cmsms/
www.ingveh.ulg.ac.be/
Contact person: Mr Pierre DUYSINX
(www.ulg.ac.be/cms/c_609885/pierre-duysinx-engineer-land-vehicles)
The Aerospace and Mechanical Engineering Department at the University of Liege
conducts research in the areas of Computational and Experimental Mechanics and more
particularly in the fields of Solid Mechanics and Materials, Fluid Mechanics,
Biomechanics, Energetics and Applied Thermodynamics.
The Department is composed of 23 Faculty members and more than 100 research
engineers, doctoral and postdoctoral fellows. Its mission is threefold: Education,
Research and Service.
The Department offers accredited undergraduate and graduate programs leading to
Bachelor, Master and Ph.D. degrees in Aerospace, Mechanical, Electromechanical and
Physics engineering.
Research activities encompass the broad areas of Aerospace, Aeronautics and
Mechanics with close ties with industry and international research centers.
On the service side, the facilities include a large subsonic wind-tunnel, a machine shop
for manufacturing in-house equipment and several state-of-the-art laboratories for
advanced computation, combustion, fabrication, metrology of mechanical systems,
vehicle dynamics, vibration testing, metallic and composite materials, packaging,
thermodynamics and turbo machine.
Studies on the recycling of the out-of-service vehicles (VHU); characterization and
treatment of the residues of automobile grinding (RBA)
Back to homepage
V2i
Boulevard de Colonster 4
4000 LIÈGE
Tel: 32-(0)43615967 - Fax 32-(0)43515968
Email: [email protected] - Web: www.v2i.be
Contact person: Mr Daniel SIMON
V2i provides a full range of services in the field of mechanical vibrations


Based on researches of international repute of the University of Liege in the field
of structural dynamics
Continuously improved and updated in close collaboration with the Department of
Aerospace and Mechanical Engineering
Thanks to its complementary expertise in numerical modeling and experimental testing,
and thanks to innovative tools, V2i offers to its customers the necessary integration of
simulation and testing in customized solutions.
The offer:




Numerical simulation: all types of analyses, lifetime prediction, shaker testing
simulation...
Measure of vibrations: modal analyses on the field or in lab, model updating...
Shaker Testing: according to international standards, any type of excitation
Development of tailor-made monitoring systems: fully customized hardware &
software
Main assets:




Responsiveness
Flexibility
Expertise
Development of tailor-made solutions
References: Techspace Aero, Cenco, Snecma, Rolls-Royce Deutschland, Sabca,
Sonaca, Arcelor Mittal, Thales, FN Herstal, Forges de Zeebruge, R-Tech (Schreder
Group), Emerson, Centre Spatial de Liège
Back to homepage
VALCOLOR
Drève Gustave Fache 17
7700 LUINGNE
Tel: 32-(0)56863300 - Fax: 32-(0)56842470
Email: [email protected] - Web: www.valcolor.com
Contact person: Mr Olivier FRANCOIS
VALCOLOR is a specialist manufacturer of industrial and house painting/coating,
protection varnish, RAL aerosol paint, signal and road-line paint. The products offered by
VALCOLOR are dedicated to professionals from the Industry and Building sectors.
Here comes a non-exhaustive list of the fields of application where VALCOLOR
intervenes:
Car accessories, Farm-produce industry, Food industry, Anticorrosion, Anti-graffiti, Film
applicator, Buckets, Car and truck bodies, Frameworks, Sheet metal works, Modular
structures, Containers, Tanks/cisterns/bottles, Advertising signs, Maintenance (factory),
Industrial equipment, Railway industry, Chemical industries, Industrial premises/Siding,
Machine tool and handling industry, Plastics, Office furniture, Street furniture, Engines
and pumps, Floors, Industrial sheet metal working.
VALCOLOR is a service above all:
One of VALCOLOR's strongest asset is its rapid completion time of client orders. Indeed,
any order placed before noon can be picked-up within the afternoon in reasonable
quantities (Max. 400 L).
VALCOLOR is also famous for its flexibility to meet the customer's specific needs, a
personalized service according to their technical and logistic requirements.
Thanks to this flexible structure VALCOLOR can easily meet the quantitative
requirements of the clientele and deliver from 5 liters to thousands of liters within a short
lead time.
As for the delivery, you can pick up your goods at the counter (fastest way) or you may
prefer to be delivered within 24H everywhere in Belgium.
Finally, VALCOLOR offers quality insurance for all its products by choosing the best raw
materials and by its manufacturing experience.
Back to homepage
VALEO VISION BELGIQUE
Parc Industriel - Rue du Parc Industriel 31
7822 MESLIN-L'EVEQUE
Tel: 32-(0)68265211 - Fax: 32-(0)68265499
Email: [email protected] - Web: www.valeo.com
Contact person: Mr Alain MARLIER
An independent industrial Group fully focused on the design, production and sale of
components, integrated systems and modules for the automotive industry, mainly for
CO2 emissions reduction, VALEO ranks among the world's top automotive suppliers.
Four Business Groups and a VALEO Service aftermarket activity offer customers
innovative global solutions, in particular in their drive to reduce CO2 emissions.
VALEO has 4 Business Groups, comprising 16 Product Groups, supplying the original
equipment market and the aftermarket.


For original equipment segment, VALEO supplies all major automakers worldwide
For replacement parts and services, VALEO supplies the original equipment
spares (OES) and independent aftermarket (IAM) through its dedicated VALEO
SERVICE organization.
The 4 Business Groups are: Powertrain Systems, Thermal Systems, Comfort and Driving
Assistance Systems, and Visibility Systems.

Powertrain Systems
This Business Group develops innovative solutions to reduce fuel consumption and CO2
emissions, while maintaining driving pleasure. These solutions include a complete range
of products for the electrification and hybridization of vehicles.
The Powertrain Systems Business Group comprises five Product Groups: Electrical
Systems, Transmission Systems, Engine Management Systems, Air Management
Systems, and Hybrid and Electric Vehicle Systems.

Thermal Systems
These systems ensure greater efficiency and autonomy, longer-lasting components, as
well as greater comfort, whatever the outside temperature. The technologies developed
by this Business Group contribute to optimizing cabin comfort and to reducing energy
consumption.
The Thermal Systems Business Group comprises four Product Groups: Climate Control,
Powertrain Thermal Systems, Compressors, and Front-End Modules.

Comfort and Driving Assistance Systems
These systems improve safety and driving comfort by offering easy access and
enhanced 360° visibility around the vehicle, while creating an ergonomic, intuitive
relationship with one’s environment.
The Comfort and Driving Assistance Systems Business Group comprises four Product
Groups: Driving Assistance, Interior Controls, Interior Electronics, and Access
Mechanisms.

Visibility Systems
These systems offer solutions for all weather and driving conditions in order to see and
be seen. The systems developed by this Business Group contribute to safety by
improving visibility of the vehicle and the driver’s visibility, while saving energy.
The Visibility Systems Business Group comprises three Product Groups: Lighting
Systems, Wiper Systems, and Wiper Motors.
Back to homepage
Zoning Industriel des Hauts-Sarts - Zone 2 - Rue Haute Claire 3
4040 HERSTAL
Tel: 32-(0)42899999 - Fax: 32-(0)42890009 – Mobile: 32-(0)476708084
Email: [email protected] - Web: www.vanhulen.be
Contact person: Mr Pierre SCHAAPS
Compression springs, traction springs, form springs, torsion springs, and double torsion
springs.
Induction coils, locking rings, stamping of items in single or combined toolings, by
electro erosion, laser and chemical components for prototype building and small series.
Assembling of mechanical, plastic or electronic parts in using conventional or specific
processes (tig and ion-beam welding ...).
The quality of the VANHULEN products is officially certified by standards such as ISO
9001:2008, EN 9100, and ISO/TS 16949:2009.
Back to homepage
VANWERS (ATELIERS FERNAND)
Rue Jean-Baptiste Cools 35
4000 LIEGE
Tel: 32-(0)42272684 - Fax: 32-(0)42276813
Email: [email protected] - Web: www.vanwers.com
Contact person: Mr Robert BOUILLON
The ATELIERS F. VANWERS is a typical family company developed thanks to the hard
work of one independent. The history of the company goes back to 1946, at a moment
when FERNAND VANWERS starts to make pieces in series with only a few turning and
milling machines in premises in Wandre. In 1950, the company buys grinding machines
and tools for the construction of dies. From that moment on, the company will continue to
progress on a regular basis and this thanks to experience but also a permanent desire to
closely follow the evolution from a technical and industrial point of view.
In 1972, the company will take a decisive turn. A neighbour of ATELIERS VANWERS, who
makes rings retires. FERNAND VANWERS buys the company and in one time doubles the
production surface. And so here he is, well settled in the neighbourhood with adjacent
premises and an important production surface that goes from one street to another.
Even if ATELIERS F. VANWERS continues to make rings, the main activity of the company
remains the production of precision tools and more precisely cutting and folding dies.
The production of such pieces requires the appropriate machinery capable of grinding to
the micron. This is the reason why the company obtained the label: « Precision
mechanical workshop».
The important machine park has been replaced several times. Evolution progresses fast
and in order to continue to improve the performances, a more and more advanced
technology has to be used. The actual numeric machines that are used today mainly
come from Switzerland, Germany and England.
Today ATELIERS FERNAND VANWERS occupies a covered surface of 1837 m² and a noncovered surface of 360 m² and employs around thirty workers.
The main activities of the company are:





High precision mechanic pieces in all kinds of materials, light alloy, alloyed steel
with high resistance, titanium alloys, pieces going to diameters of 2000 mm and
lengths of 4000 mm.
Precision tools and calibers.
Dies, moulds, pliers, milling machines, axes de pistons, rings and special washers
Pieces made by electro erosion, wire-cut and ploughing systems.
Pieces made in small series destined for space shuttle Ariane as well as airplane
motors.
In addition, the company has ISO9001 (ed.2000), OTAN, EN 9100 (EASE, QUALIFAS)
certifications and also takes part in aeronautics and aerospace programs like CFM56,
ARIANE 5, VULCAIN, GE90, AIRBUS A380 and the aerospace project Vinci.
Back to homepage
VISIO ING CONSULT
Rue de Wavre 17
4280 HANNUT
Tel: 32-(0)19636448
Email: [email protected] - Web: www.visioingconsult.be
Contact person: Mr Frédéric GERARD
VISIO ING CONSULT would like to introduce you to three main solutions.
Every one of them is an innovation in its design and in the offer we can provide.
Vic-control®: V.I.C. integrates turnkey systems for product control (quality/compliance)
in production lines by means of cameras, optical and sensors systems controlled by
flexible and multifunctional software. This system provides a solution 100% adapted to
your needs. NEEDED when conventional systems cannot provide solutions
SGW-Stock Get Way®: Its design allows you to obtain a 'custom-made' solution very
quickly. It is provided with a central core that contains all the "intelligence" and a humanmachine interface that is developed according to the needs.
Composed of four modules:
WMS: Stock management
YMS: Logistic in-situ
|
|
MES: Production follow-up
Geo localisation: People and material follow-up
Vic-Interface: This program is a tool designed to quickly create interfaces between
different software or between different hardware. It allows you to interact with various
interfaces (TCP / IP, RS232, Digital…) with different platforms (frames, socket,
messages, web services...) by integrating, if necessary, a control process.
Back to homepage
V&M RECYCLING
Chemin du Pont d’Haine
7034 OBOURG
Tel: 32-(0)65589265
Email: [email protected] - Web: http://vmrecyclingmetaux.be
Contact person: Mr Geoffroy DUMONCEAU
RECYMET, your partner for recycling of ferrous and non-ferrous scrap metals
Based in Obourg (Mons) in Hainaut and a subsidiary of the Comet group, V&M Recycling
specialises in the collection of ferrous and non-ferrous metals.
Using our experience, competences and professionalism, we will do our utmost to
provide our customers (private persons and industries) with the best possible service.
We are also experts in the purchase and treatment of end-of-life vehicles (ELVs) as well
as the sale of automotive spare parts.
We have been approved by the Walloon Region and use state-of-the-art, highperformance machines. Depending on our buyers’ requirements, we can also ensure the
adequate treatment and preparation of various materials (sorting, shrinking, cutting and
packing…).
Thanks to our high-quality and serious work, we boast numerous satisfied customers.
Back to homepage
VTC
Avenue de l'Eau Vive 2
7700 MOUSCRON
Tel: 32-(0)56554966 – Fax: 32-(0)56348662
Email: [email protected] - Web: www.vtc.be
Contact person: Mr Jean-Louis MATTON
Make fit out your commercial vehicle by VTC will spare you costs, will give you more
space and time, and will optimize your professionalism to your customers. A perfect
arrangement of vehicles is the reflection of your image. Your business card on the road
Active since 1996, VTC was ceaselessly outlined through years in the developments of
commercial vehicles. By the modular character and the compatibility with all the brands,
we have a solution as well for the little as for the big vehicles.
Back to homepage
WARNY & CIE
Zone Industrielle I - Talstrasse 16-18
4780 SAINT-VITH
Tel: 32-(0)80221480 – Fax: 32-(0)80221482
Email: [email protected] - Web: www.warny.com
Contact person: Mr Michael WARNY
The company WARNY has been founded in 1961 in Sankt Vith/Belgium.
Over the years, WARNY has specialized in the following fields of activity:
All kind of metal forming, steel and high-grade steel: deep-drawing, punch-pressing,
cutting, stamping, welding.
Production of about 4000 different car-parts for the most common cars types
Production of half-shells for silencers, catalysts and head shields
Production of components. Assemblies
Prototyping
3D Laser cutting (5 axis)
Since many years we are working as sub-contractor for well-known companies of the
automotive, agricultural and building sector.
Our machinery:







Mechanical and hydraulic presses up to 630 t
Max size of the table : 3200 mm x 2000 mm
Coiling machine max. width 1530 mm
Welding robot – ROMAT A310 (CLOOS)
3D Laser
Sheet metal folding presses
Guillotine shear

Spot welding machines
Development, design and manufacture of deep-drawing and stamping tools, by using the
newest construction technologies, we can read nearly all files:


CAD Solid Works
MASTERCAM
1 Copy fraser (max 1200 x 900)
3 CNC controlled milling machines
Our ISO 9001:2008 certification guaranties products of optimal quality.
From design to production: WARNY, a team to realize your projects.
Back to homepage
WOIT
Rue Pépin 33-35
4040 HERSTAL
Tel: 32-(0)42641522 – Fax: 32-(0)42481121 – Mobile: 32-(0)497411717
Email: [email protected] - Web: www.woit.be
Contact person: Mr Didier MEUNIER
WOIT is a foundry that specializes in the casting of non-ferrous metals, aluminium,
bronze, copper-aluminium alloys, zamak and brass.
The company produces its own die casts and sand and shell moulds, and provides a
machining and assembling service for all metal parts.
We also provide digitally-controlled finishing services
Back to homepage
YMAX
Rue des Capucins 12
7000 MONS
Tel: 32-(0)65565779 – Fax: 32-(0)65565780 – Mobile: 32-(0)477564277
Email: [email protected] - Web: www.ymax.be
Contact person: Mr Didier FORET
Specialized in the innovation in automobile and industrial maintenance YMAX supplies
the biggest European groups.
Brazing plastics system
Rust inhibitor
Lubricant
Painting
Adhesive
Back to homepage

automobile directory - Bureau économique et Commerciale de la

Transcription

Similar documents

the program brochure

1998 BCP/Wheelabrator Pass Thru Shotblast M

electrical products

IIJS 2014 Flyer - India International Jewellery Show

Colonial Co-operative Bank

The meeco Group

parents! - First In Math

screen actors guild

Tidland exapnds Air Chuck offering with NimCor

Mecachrome brochure