solar fotovoltaic module

SOLAR FOTOVOLTAIC MODULE
Energy Efficiency Innovation
Your contribution for a sustainable earth and reduce CO2
LIT Y
A
U
Q
P
O
T
5W
UP TO 29
SITECNO high power modules
SITECNO MODULES
1. POSITIVE POWER TOLERANCE
Photovoltaic modules from SITECNO have an outstanding positive power tolerance of up to +10 Wp.
More output with high-power modules
High power up to 295 Watt
Through the combination of the selected components
of the well-proven SITECNO and solar cells of
the new technology, SITECNO high-power modules reach
an efficiency of over 17.6%
Output
Better
weak light
behavior
16% more
power
Excellent weak light behavior
In addition to their high power, the SITECNO high power
modules are characterized by their particularly
good weak light behavior. That means more gain,
especially in diffuse light and in the morning and
evening hours. The fact that the module yield is
less dependent on the angle of light incidence also
provides a higher installation flexibility.
SITEC with 290 Wp modules
Conventional 250 Wp module
Time of day
Made in EU
Extensive quality managment through production according to international quality and
environmental standards, such as ISO 9001 and
ISO 14001 as well as strict international examinations
10% less installation effort
For the same installed power, you need less modules.
This means you can save on average 10% of
the time and material needed.
Constantly high cell quality through strict quality
examination by high-resolution electroluminescence
and infrared measurements
With the SITECNO quality, well-proven , also the
high power modules come to you as a particularly
stable and durable product. No matter if pressure or
suction load: SITECNO modules have demonstrated to
withstand a mechanical load of 5400 Pa.
Strict quality examinations of the supplied
components and each manufacturing step through
optical and electronic test stations along the whole
manufacturing line
Tested
13 solar modules
Issue 5/2006
Product Range:
Monocrystalline: 240 - 320 Wp
Polycrystalline: 50 - 315 Wp
25
Proper recycling of all sold modules through full
membership in the PV Cycle Association
Photovoltaic modules
very good
Intelligent and perfectly matched systems and
services from the tehnical and economical plant
layout up to the factory service
Issue 04/2010
Fraunhofer
Worldwide known and certified through VDE
(IEC 61215 Ed. IEC 61730-1 Ed.1 and
IEC 61731-2 Ed.1),
ISE
tested in accordance with the PVDI test programme
Clean Energy Council (approved PV module)
6
Monocrystalline 60 cells: 300Wp
25 years performance quarantee to all solar modules
OKO TEST
LIFE WORTH LIVING
Latest products
Polycristalline 60 cells: 280Wp
Top positions in independent performance tests
such as Stiftung Warentest, Okotest, and the “PV
Durability Initiative” (PVDI) of the Frauenhofer Institute
for solar energy systems ISE
GOOD
3. RESISTANCE TO THE ELEMENTS
Every SITECNO PV module must operate reliable for
decades, and in all type of weather and under all temperature fluctuations. Therefore, SITECNO solar modules
are subjected to the most demanding load tests.
BIPV: 240 - 320 Wp
100% quality
Top Grade
2. FULLY INTEGRATED PRODUCTION
From the manufacture of poly-silicon to the production
of ingots, silicon wafers and solar cells to the integration
of PV modules, the manufacturing process at
SITECNO is gapless
CERTIFIED SAFETY
FOR PRODUCTIVE DECADESE
Damp-Heat Test IEC 61215 10.13
Result: The modules exceed the requirements by
the factor of three in regard to environments with
intense damp/heat.
Thermal Cycling Test IEC 61215 10.11
Result: The modules exceed the requirements in
regard to temperature fluctuation and three times
extended performance time.
Mechanical Load Test IEC 61215 10.16
Result: SITECNO PV-modules’ structural
engineering sustains above
average loads.
4. MATERIAL CONTROL
SITECNO modules are manufactured using only the
best materials. An important basis for this is the regular
monitoring of all suppliers.
5. MAINTENANCE
Since there are no parts that suffer wear and tear,
SITECNO modules are virtually maintenance free.
6. FLEXIBILITY OF USE
SITECNO modules have been proven for the most
diverse uses from small rooftop systems up to mega
watt power plants on open land. Also, salt spray and
ammonia tests expressly permit the use of SITECNO
modules close to the sea and on agricultural land.
SITECNO Monocrystalline Solar Modules
SI-60M-280-290
Solar module SI-60M-280-290
SI-60M-280
SI-60M-285
SI-60M-290
Rated power
Electrical data (STC)
PMPP
[W]
280
285
290
Rated voltage
VMPP
[V]
31.2
31.3
31.3
Rated current
IMPP
[A]
8.97
9.10
9.25
Open-circuit voltage
VOC
[V]
39.2
39.2
39.3
Short-circuit current
ISC
[A]
9.67
9.73
9.80
Efficiency
η
[%]
17.0
17.3
17.6
SI-60M-280
SI-60M-285
SI-60M-290
2
Electrical data (NOCT)
Strong performance
Due to the unique combination of components, the
high-efficiency modules from SITECNO are particu larly powerful. With the high efficiency, the SITECNO
offers maximum performance compared to the small
High Efficiency
HE
ficiency and the long-term high energy yields of
tested and confirmed by independent institutes. SITECNO
modules are sorted with a positive power classification. The performance is guaranteed by SITECNO for
PMPP
[W]
205
208
212
VMPP
[V]
28.4
28.4
28.4
Current
IMPP
[A]
7.21
7.33
7.45
Open-circuit voltage
VOC
[V]
36.1
36.1
36.2
Short-circuit current
ISC
[A]
7.82
7.87
7.93
Efficiency
η
[%]
15.6
15.8
16.1
2
Electrical values measured under nominal operating conditions of cells: 800 W/m
; 20°C; AM 1.5; wind 1 m/s
NOCT: 48°C (nominal operating cell temperature)
Known worldwide and certified
Additional electrical data
BABT (MCS), VDE (IEC 61215 Ed. 2,
IEC 61730-1 Ed. 1 and IEC 61730-2 Ed. 1),
Comprehensive quality management
Basic module data
2
2
Classification range (positive classification)
[%]
rel.
<2
[W]
0/+4.99
[mm³]
1660 x 990 x 50
Weight
[kg]
20
Cell size
60
[mm²]
156 x 156
Cell material
Monocrystalline Si
Max. module pressure load
[Pa]
5400
Front sheet
Solar glass (TSG)
Max. module suction load
[Pa]
5400
Back sheet
Polymer sheet
Max. system voltage
[VDC]
1000
Frame material
Al alloy
[A]
20
Loads
controlling
Length x width x height
Number of cells
Production to international quality and envi
-
module ensure efficient operation of your photovoltaic
system. The quality of SITECNO modules is continuously
Power
Voltage
Efficient use of sunlight due to unique
combination of module components
overall area required. This also means: less effort
and less material for installation. This increase in ef -
; 25°C; AM 1.5
Reverse current load
IR
Basic data junction box
Mechanical load acc. to IEC/EN 61215
Length x width x height
Temperature coefficients
[mm³]
IP class
148 x 123 x 27
IP65
Temperature coefficient SC
I
α (I SC )
[%/K]
+0.05
Cable length
Temperature coefficient VOC
β (VOC)
[%/K]
-0.30
Connectors
MC4
Temperature coefficient PMPP
γ (PMPP)
[%/K]
-0.43
Bypass diodes
3
Measurement tolerance of PMPP under STC -3/+3% | Accuracy of other electrical values -10/+10% | Efficiency relating to gross module area
Dimensions [mm]
800
430
1660
Our modules – Quality signed and sealed
800 (-)
1460
100
950
1200 (+)
100
50
430
990
[mm]
1200 (+), 800 (-)
SITECNO Polycrystalline Solar Module
SI-60P-245-265
Solar module SITECNO SI-60P 245-265
Electrical data (STC)
SI-60P 245
SI60-P 250
SI-60P 255
SI-60P 260
SI-60-P265
Rated power
PMPP
[W]
245
250
255
260
265
Rated voltage
VMPP
[V]
30.2
30.3
30.4
30.5
30.7
Rated current
IMPP
[A]
8.11
8.24
8.38
8.51
8.64
Open-circuit voltage
VOC
[V]
37.5
37.5
37.6
37.7
37.7
Short-circuit current
ISC
[A]
8.63
8.76
8.88
9.01
9.14
Efficiency
η
[%]
14.9
15.2
15.5
15.8
16.1
2
Electrical data (NOCT)
Strong performance
Due to the unique combination of components, the
high-efficiency modules from SITECNO modules are
particularly powerful. With the high efficiency, the
SITECNO offers maximum performance compared to
the small overall area required. This also means: less
effort and less material for installation. This increase
in efficiency and the long-term high energy yields-of
SITECNO ensure efficient operation of your photovoltaic
system. The quality of SITECNO modules is continuously
tested and confirmed by independent institutes. SITECNO
modules are sorted with a positive power classification.
The performance is guaranteed by SITECNO solar for
25 years the product garantee is for 10 years
-
High Efficiency
HE
Efficient use of sunlight due to unique
combination of module components
Known worldwide and certified
VDE (IEC 61215 Ed. 2, EC 61730-1 Ed. 1 and
IEC 61730-2 Ed. 1), Clean Energy Council
(approved PV module)
; 25°C; AM 1.5
SI-60P 245
SI60-P 250
SI-60P 255
SI-60P 260
SI-60-P265
Power
PMPP
[W]
179
183
187
190
194
Voltage
VMPP
[V]
27.3
27.4
27.5
27.6
27.7
Current
IMPP
[A]
6.56
6.67
6.78
6.89
7.00
Open-circuit voltage
VOC
[V]
34.5
34.5
34.6
34.6
34.7
Short-circuit current
ISC
[A]
7.02
7.12
7.22
7.33
7.43
Efficiency
η
[%]
13.6
13.9
14.2
14.5
14.7
2
Electrical values measured under nominal operating conditions of cells: 800 W/m
; 20°C; AM 1.5; wind 1 m/s
NOCT: 48°C (nominal operating cell temperature)
Additional electrical data
Basic module data
2
2
Classification range (positive classification)
[%]
rel.
<4
[W]
0/+4.99
Length x width x height
[mm³]
1660 x 990 x 50
Weight
[kg]
20
Number of cells
Cell size
Loads
60
[mm²]
156 x 156
Cell material
Polycrystalline Si
Max. module pressure load
[Pa]
5400
Front sheet
Solar glass (TSG)
Max. module suction load
[Pa]
5400
Back sheet
Polymer sheet
[VDC]
1000
Frame material
Al alloy
[A]
15
Max. system voltage
Reverse current load
IR
Basic data junction box
Mechanical load acc. to IEC/EN 61215
Length x width x height
Temperature coefficients
[mm³]
IP class
148 x 123 x 28
IP65
Temperature coefficient SC
I
α (I SC )
[%/K]
+0.04
Cable length
Temperature coefficient VOC
β (VOC)
[%/K]
-0.31
Connectors
PV-JM601
Temperature coefficient PMPP
γ (PMPP)
[%/K]
-0.43
Bypass diodes
3
[mm]
Measurement tolerance of PMPP under STC -3/+3% | Accuracy of other electrical values -10/+10% | Efficiency relating to gross module area
Dimensions [mm]
100
950
1460
800
800 (-)
430
1660
430
Our modules – Quality signed and sealed
50
1200 (+)
100
990
1200 (+), 800 (-)
SOLAR HIGH QUALITY MODULES
SITECNO THE NAME OF TRUST
[email protected]
www.sitecno.eu
Authorised distributor: