2008/2009 Sales and Technical Support Manual - Contacts

Transcription

2008/2009
Sales and
Technical Support
Manual
page
2008/2009 Sales and Tech Support Manual
This Sales and Technical Support Manual is published for the benefit of all DALBELLO bootsellers, technicians, rental operators, and other skiing
professionals. Here you find essential information to help you understand, sell, and service DALBELLO Ski Boots. We believe the more product information bootfitters and technicians have about a product, the better able they are to assist their customers in choosing the proper ski boot model and size.
Please take the time to read the information in this manual. Keep a reference copy to consult if you have questions or problems.
If you have any comments you would like to share, please contact your DALBELLO representative, or visit us online: www.dalbello.it (international) or
www.dalbellosports.com (USA).
Additional information to help you service Dalbello ski boots may be accessed from our online technical service center:
www.dalbello.it/service
At this website you will find
the following information:
Dalbello Owners Manual (PDF downloads)
Previous Year’s Technical Manuals (PDF downloads)
Spare Parts Information (PDF downloads)
Stance Geometry System Technical Information (PDF downloads)
Ski Boot Photo downloads (JPG downloads)
Corporate Logos & Advertising Materials (various formats)
Tech Manual Table of Contents
Dalbello Ski Boot Company...................................................................................
3
Choosing Dalbello Ski Boots.................................................................................
Understanding Performance Group Positioning
4
5
Selling Dalbello Ski Boots.....................................................................................
Understanding your customers ski boot needs
Advice from the professionals
Frequently Asked Questions
Dalbello Architecture and Technologies................................................................
Dalbello Last Shape..............................................................................................
8
Trufit & Supercomfort Innerboot Technology.........................................................
Constructions & Specifications
TRUFIT Custom Fit System Procedure and Guidelines
I.D. THERMO Custom Fit Innerboots...................................................................
Constructions & Specifications
ID Thermo Custom Fit System Procedure and Guidelines
9
Dalbello ‘FIT FOR WOMEN” Construction & Technology.....................................
13
2008/2009 Dalbello Ski Boot Collection
7
11
Dalbello Freeski....................................................................................................
Krypton Series for Men & Women........................................................................
Proton Series (Men) & Electra Series (Women)...................................................
Axion Series (Men) & Raya Series (Women)........................................................
Aerro Series (Men) & Aspire Series (Women) .....................................................
Junior Boots .........................................................................................................
14
Rental Boots ........................................................................................................
Vantage 4 Factor Rental System
26
2008/2009 Technical Specifications......................................................................
28
Flex Index Table and Sizing Table.........................................................................
30
Boot Sole Length Table.........................................................................................
31
© Copyright 2008 Dalbello Sports.
All Rights Reserved.
page
16
18
20
22
24
ProTeam riders
< Evariste Berney
Glen Plake >
< Mirjam Jaeger
Margarita Marbler >
< Katharina Mihaljevic
Kim Reichhelm >
< Ilir Osmani
Jacqui Cooper >
< Brad Holmes
TANNER HALL >
In 1974, we built the first pair of Dalbello ski boots in a small ski boot factory in the foothills of the
Italian Dolomites. Today, as it was more than 30 years ago, our approach to addressing the needs
of skiers is exactly the same as it was at that time. We are deeply committed to helping skiers to ski
better and have more fun. We strive to build the highest quality ski boots; boots that look great and
fit great and are loaded with authentic performance features to make them ski great. This commitment has made Dalbello one of the fastest growing ski boot brands in the world.
page
Choosing Dalbello
PERFORMANCE GROUP POSITIONING
Dalbello builds skiboots for skiers of all performance and skill levels. Performance and fit characteristics are carefully enginereed into each Dalbello
skiboot, and are a function of design, architecture, last shape, and dynamic flexing characteristics. Refer to the chart below to select the Dalbello ski
boot performance group that is appropriate for your type of skiing.
FREESKI
TERRAIN
LAST
FLEX
MEN/ WOMEN
FLEX
98 +
millimeter
FR
FLEX
Vario
TOP PERFORMANCE
FLEX
FR
FLEX
TP
FR
TP
FLEX
98
FLEX
millimeter
FLEX
120
FLEX
HP
FLEX
SPORT COMFORT
ALLROUND
ALL MOUNTAIN
HIGH PERFORMANCE
FR
TP
HP
FR
AR
TP
HP
AR
TP
SC
HP
AR
SC
HP
FLEX
FLEX
FLEX
FLEX
101
FLEX
millimeter
FLEX
FLEX
100
FLEX
FLEX
FLEX
FLEX
FLEX
103
FLEX
millimeter
AR
80
FLEX
SC
FLEX
AR
SC
FLEX
105
millimeter
SC
65
4
page
©Scott DW Smith
Selling Skills
Understanding your customers skiboot needs
Selecting the appropriate ski boot for each customer is challenging. The more you know about your customers; their skill level, level of physical fitness, feet type,
physical attributes, prior boot fitting problems, general knowledge of ski equipment, commitment to the sport, future goals, etc., the easier, faster, and more
efficiently it will be for you to choose a suitable ski boot for them. Start by learning as much as you can about your customers:
Ask questions about their skiing skills:
1. How well do you ski?
2. Where do you ski and how many days per year do you ski?
3. Do you ski fast? Moderate speeds? Slow?
4. Which types of terrain do you prefer? Groomed, Powder, Hardpack, Moguls, Off Piste, Park & Pipe?
5. Do you, or will you, take ski lessons?
Ask questions about their ski equipment:
1. What kind of boots do you presently use? How old are they?
2. Why are you shopping for new ski boots?
3. What kind of skis do you presently use?
Probe for additional information:
1. Do you have problems with your feet?
2. Do you have problems buying other kinds of footwear?
3. Are you athletic? Do you participate in other sports?
4. How much money do you plan to spend on new ski boots?
5. Do you use orthotics or custom insoles?
Measure and observe your customer’s feet and lower legs to determine:
Foot length: Measure both feet
Foot width: narrow, average, or wide?
Instep height: High/Average/Low?
Arch: Average Height/Flat Foot?
Calf width? Thin, Average, Large, Extra Large?
Are there any protruding bones or bone spurs?
Advice from the professionals
Following are some simple tips to help you develop and improve your skills as a professional bootfitter/boot seller. Conducting yourself professionally in front of
your customers is a very positive reflection on you and your expertise, as well as on the quality and professionalism of your store. Skier’s prefer to do business
with professionals.
Know your inventory
Familiarize yourself every ski boot brand and model sold by your store. Try on evey ski boot you sell. Know which boot models are best suited for different skier
types and foot shapes. Before you recommend a particular ski boot model and size, be sure you know that it is in your store’s inventory.
Limit the number of ski boot models you recommend
Customers become confused when, in their selection process, they try on too many ski boots. You will most likely close the sale if you limit the number of ski boot
models you recommend to 2 or 3 MAXIMUM.
Make sure the size you have selected is correct
The most important service you can perform for your customer is to make sure you select and sell that customer the correct size ski boot for his/her foot. It is
estimated that 60% of all ski boots sold are between 1 - 3 sizes TOO BIG!!! Boots that are too big do not provide the proper support for responsiveness and control.
The innerboot materials have a tendency to break down (compress) very quickly due to the excess foot movement within the boot. Boots that are too big must be
buckled tighter than boots that fit correctly. Overtightening” produces uncomfortable, aching, cold feet.
Make sure your customer is wearing the appropriate ski sock
Ski socks should be light to medium weight, wrinkle free, and, ideally, a woven blend of synthetic and/or natural fibers. They are designed to wick moisture away
from the skin in order to keep the foot dry and warm. Socks should fit snugly and comfortably around the foot and over the leg calf. Most skiers find that ski boots
fit better and are warmer when they are warn with only one ski sock.
5
page
Selling Skills
Advice from the professional
Describe to your customer how a new ski boot should feel
You should prepare your customer for what he/she is about to feel BEFORE the ski boot is tried on. New ski boots should feel comfortable and snug. When the
knee is flexed forward, the heel should stay in the heel pocket of the boot. It is normal to feel the front of the boot when standing upright, but the toes will pull back
when the boot is buckled and the knee is flexed forward. The multi density foam fit materials in Dalbello boots are sensitive to body heat and pressure from the foot
contours. They will conform to the foot after the boot has been on the foot for 5 - 7 minutes. If a minor pressure point is initially felt, it will usually disappear within
that time. The foot should be held firmly without the need to tighten the buckles excessively. A good fit should originate from the shape of the boot matching the
shape of the foot. For TRUFIT model fitting, refer to page 10, “TRUFIT Custom Fit System Procedures”.
Explain how all features, adjustments, and mechanisms function
Make sure you take the time to fit both boots to your customer. Use the time you have to explain the buckle adjustments, and other personalization mechanisms
(forward lean, flex control, walk/ski, canting, etc.) Try to answer your customer’s questions with simple explanations.
Explain how ski boots should be cared for
Be sure to avoid walking excessively on hard or abrasive surfaces in ski boots. Otherwise, damage to the bootsole can occur over time. Ski Boots should be
cleaned ONLY with water and a mild detergent. Cleaning with other chemicals can damage the boot. Dry the boots after each use. If excessively wet inside, the
innerboots may be removed for faster drying. Avoid drying boots near radiators, fireplaces, microwave ovens, or any other sources of direct or excessive (above
45°C/110°F) heat.
Explain how ski boots should be stored at the end of the season
Make sure the entire ski boot is clean and dry....inside and out. Over a long period of time, moisture contained in the innerboots can become a breeding ground
for mold, mildew, and other kinds of bacteria. Remove the liner. Clean it and dry it. Put it back into the shell making sure that it is inserted correctly, and that the
tongue is not twisted. Buckle the boots up with buckles under loose tension. Close the Velcro powerstrap (loosely). This will keep the shell plastic in the proper
alignment to close around your foot and lower leg the next time you wear the boots. Store the boots in a cool, dry, and dark place. Do not leave them in a place
where small animals or insects may be able to nest in them.
FAQ’s (Frequently Asked Questions)
How can I verify that the ski boot size I have selected is correct ?
All Dalbello ski boots are built on the MONDOPOINT sizing scale. Mondopoint sizes can be converted to correspond closely to European, UK, and USA sizes.
Check the “SKIBOOT SIZING CONVERSION TABLE” on page 31 of the Technical Manual for more information. Size numbers are, unfortunately, only a starting
point for selecting the correct size. There is a commonly used method, or technique, in ski boot fitting to verify whether the ski boot size you have selected will
match the foot you are trying to fit. That method is referred to as ‘SHELL SIZING”. Most boot fitting professionals will check “SHELL SIZING” before fitting the ski
boot to the customer’s foot.
How can I avoid getting cold feet?
1) Make sure your boots are dry at the beginning of each ski day. Remove wet innerboots at night to dry them, but NEVER DRY INNERBOOTS ON A
RADIATOR, FIREPLACE, OR ANY OTHER SOURCE OF EXCESS HEAT. Consider using a boot drying appliance such as the Therm-IC® Boot Dryer.
2) Avoid wearing multiple pairs of socks. One pair of high performance, technical ski socks is sufficient.
3) If your foot perspires excessively, change into a dry pair of socks at midday.
4) To keep your feet warm and dry, always wear clean socks. The moisture wicking function of the socks is best when they are clean.
5) Have your boot fit checked by an expert. Too big? Too small? Pressure Points ? Is the blood circulation being restricted? Consider a custom footbed..
6) Install an electronic insole footwarmer, such as those available from Therm-IC®.
Dalbello’s “Fit for Women” program features ski models that have been specifically engineered for women.
How are Dalbello women’s ski boots different from Dalbello men’s ski boots?
All Dalbello boots “Fit For Women” feature the following women’s only characteristics:
1) All women’s model cuffs are injected with softer, more flexible plastics
2) Women’s Krypton, Electra, and Raya models feature unique cuff geometries that are lower in overall height than men’s cuffs in corresponding models.
3) All Dalbello women’s innerboots are lower in overall height than men’s innerboots.
4) All Dalbello women’s innerboots are lasted for women’s feet. They are narrower in the rearfoot, and have a more extreme taper angle from forefoot to rearfoot.
5) All womens innerboots are constructed with more padding to reduce volume, accommodate lower volume feet, and add insulation.
6) Women’s models in Raya and Aspire series feature boot top circumference expansion adjustability.
6
page
UNDERSTANDING DALBELLO
SKI BOOT ARCHITECTURE & TECHNOLOGY
There are three basic ski boot construction architectures: Overlap (2 Piece), Cabrio (3 Piece) and Rear Entry. Different architectures are selected by ski boot
designers for the different performance characteristics, different fit and foothold characteristics, and different convenience characteristics they feature. Dalbello
produces ski boots that incorporate all three construction technologies.
CABRIO DESIGN 3 Piece Overlap
Cabrio Design - 3 Piece Overlap Construction
WHAT IS IT?
Cabrio Design is a ski boot design architecture that that incorporates 3 structural elements - (1) lower shell, (2)
upper cuff and, (3) external shell tongue - in its structure. Developed for its fitting versatility, easy handling, and
dynamic performance advantages with modern ski shapes. Since 1995, Dalbello has been the industry’s leading
manufacturer of 3 Piece Cabrio Design technology ski boots.
WHAT DOES IT DO?
Modern shaped skis are more responsive and easier to turn than old style long, “straight skis”. Modern skis
respond to very subtle and precise changes in angulation, edge pressure, and steering forces. Modern shaped skis
are more dynamic than old style skis, requiring a ski boot that has strong side-to-side stability along with smooth
and progressive flexibility in the forward direction. Modern skis, for most skiers, do not respond favorably to high
quantities of force and pressure that are typically characteristic of more traditional design ski boots. Cabrio Design
technology ski boots give skiers the optimal combination of support, stability, balanced stance, powerful edging
control, and dynamic response.
HOW DOES IT FUNCTION?
Cabrio Design permits the use of stiffer and more rigid plastics in the lower shell. This strengthens the support around the foot and lower leg providing quick
response and precise transfer of power to the ski edges. This design also prevents the lower shell from distorting and bulging as the boot flexes, making the
boot more smooth and stable at high speeds and on irregular terrain. Smooth and progressive forward flex is precisely controlled using an external shell tongue.
Changing dynamic flex and performance is controlled by simply changing tongue material and geometry, or by limiting the forward movement of the boot cuff
with the flex adjustment mechanism. Only Cabrio Design ski boots feature such rigid and precise lateral support while at the same time providing a smooth and
progressive flex. Cabrio Design technology also has a greater degree of fitting versatility than traditional ski boots. Cabrio Design is able to adapt to a wider
variety of feet shapes and instep heights than conventional ski boots due the “open throat” lower shell/shell tongue construction.
CLASSIC DESIGN 2 Piece Overlap
Classic Design - 2 Piece Overlap Construction
WHAT IS IT?
Classic 2 Piece Overlap design ski boots are the industry’s most common design construction. 2 Piece overlap
skiboots (sometimes referred to as “shellfit” boots) incorporate two structural elements - (1) a lower shell with
overlapping and underlapping flanges that “wrap” to adapt to different volume feet and feet shapes securing the
lower foot inside the ski boot, and (2) an upper cuff with over and underlapping flanges which, when closed, secure
the lower leg and ankle inside the ski boot.
WHAT DOES IT DO?
Structurally, 2 piece overlap ski boots are simple constructions that are highly variable in volume. They are simple
to open and close and are designed to hold the skier’s foot and leg in a strong and balanced stance position,
permitting energy and leverage to be transferred from the skier’s feet and legs to the skis for performance and and
control.
HOW DOES IT WORK?
The “overlapping” function of the 2 piece design allows the over and underlapping flanges of the shell and cuff to slide across one another when the buckles are
tightened, therby adapting the volume of the shell and cuff to the individual skier’s foot and lower leg.Dynamic function in these designs is regulated by changing
structural design elements (cuff and shell angle, cuff height, height of lower shell sidewalls, plastic stiffness, innerboot designs and constructions.
Dynalink - Rearfoot Retention System
WHAT IS IT?
Dynalink is an independently functioning heel/instep closure band assembly that secures the skiers foot in the
middle and rearfoot sections of the ski boot.
KRYPTON
AXION & RAYA
WHAT DOES IT DO ?
Dynalink holds the skiers foot securely toward the rear part of the ski boot. During boot flex, the Dyanlink band
does not permit the foot to slide forward or the heel to lift inside the boot shell. The closure system prevents the
lower shell from bulging and distorting when the boot is flexed forward. Because the skier’s foot is held more
securely, high speed stability and control over the skis on irregular and difficult terrain are improved.
HOW DOES IT FUNCTION?
Dynalink band (plastic closure strap) is fixed to the lower shell at, or near, the inside (medial) cuff hinge. The Dynalink closure buckle, on the lateral side, is attached
to the lower shell (instead of cuff). Both closure band and buckle are fixed in position on the lower shell when the Dynalink assembly is closed. Neither
component is permitted to move, either forward or up and down, with the boot cuff as the boot is flexed. The foot is, therefore, securely held in position and can
not lift of slide during skiing. This assembly also prevents the boot from bulging and distorting during skiing.
7
page
Dalbello offers a wide variety of last shapes and fitting volumes to suit skiers of all different performance levels.
Last shapes
Dalbello offers 4 different last shapes to accomodate different feet shapes with varying degrees of foot retention to perfectly match the performance and comfort
requirements of different skiers.
Last shape numbers refer to straight line measurement in millimeters inside the boot shell across the forefoot. In general, lower volume lasted boots (measurements 100 mm) fit very closely to the foot and use thinner innerboots. Their precise and sensitive fit provides very quick power transfer to the ski. Because the
fit is less forgiving, lower volume lasted boots require more time to fit than higher volume boots. Higher volume lasted boots ( 104 mm) have more space inside
the shell, permit the use of more cushioned innerboots, and are designed for abundant cushioned comfort.
98 mm Last
101 mm Last
Lowest overall volume last in Dalbello collection. Precise and
accurate fit. Envelopes the anatomic contours of the foot and
lower leg for maximum foot retention with enhanced sensitivity
and responsiveness.
New last shape for serious performance oriented skiers.
Slightly more forefoot and ankle volume than Krypton (98mm)
provides a versatile and comfortable fit. Strong foothold with
balanced stance angle keeps the foot relaxed and stable at a
wide variety of speeds.
Proton/ Electra
Krypton
103 mm Last
105 mm Last
Extremely versatile fitting last combines an expanded volume forefoot and toe box area with a close fitting rearfoot and
ankle area. Comfortably accommodates a wide range of foot
shapes with max foothold and exceptional comfort.
Dalbello’s most accommodating fit last provides immediate
and enduring comfort. Extra shell-fit volume fits wide feet
comfortably and permits the use of softer cushioning and
insulating materials in the innerboot.
Axion/ Raya
Aerro/ Aspire/ MX/ DX
DALBELLO 08/09 LAST SHAPE TABLE
Men’s Innerboot Last Shape/ Fit Volume
Women’s Innerboot Last Shape/ Fit Volume
2008/2009
2008/2009
Shell Last Innerboot
Men’s Model
Women’s Model
Width in
mm
Construction
Forefoot
Rearfoot
Calf
Forefoot
Rearfoot
Calf
Krypton Pro
Krypton Kryzma
98 mm
TRUFIT Comp
Medium/ Low
Extreme/Tapered
Medium
Medium/ Low
Tapered
Medium
98 mm
TRUFIT Sport
Medium
Tapered
Medium
Krypton Il Moro
Krypton Cross
Krypton Storm
98 mm
TRUFIT Performer
Medium
Tapered
Medium
Medium
Tapered
Medium
Krypton Rampage
Krypton Lotus
98 mm
TRUFIT Sport
Medium
Tapered
Medium
Medium
Tapered
Medium
Proton12
101 mm
TRUFIT Team Pro
Medium
Extreme/Tapered
Medium
Surge
101 mm
TRUFIT Team Pro
Medium
Tapered
Medium
Proton 10
Electra 10
101 mm
TRUFIT Performer
Medium/ Wide
Medium/ Tapered
Medium
Medium
Medium/ Tapered
Medium
Proton 8
Electra 8
101 mm
TRUFIT Sport
Medium/ Wide
Medium/ Tapered
Medium/ Wide
Medium/ Wide
Medium/ Tapered
Medium
103 mm
TRUFIT Comp
Medium
Tapered
Medium
Axion 11
Axion 9
Raya 9
103 mm
TRUFIT Performer
Medium
Tapered
Medium
Medium
Medium/ Tapered
Medium/ Wide
Axion 7
Raya 7
103 mm
TRUFIT Sport
Medium/ Wide
Medium/Tapered
Medium/ Wide
Medium
Medium/ Tapered
Medium/ Wide
Axion 5
Raya 5
103 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
103 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Rave
Aerro 80
Aspire 80
105 mm
TRUFIT Performer
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 70
Aspire 70
105 mm
TRUFIT Sport
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 60
Aspire 60
105 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 50
Aspire 50
105 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
8
page
UNDERSTANDING DALBELLO
INNERBOOT TECHNOLOGY
Adaptive Comfort toe box for improved comfort and warmth.
Heat Moldable, microcellular ULTEVA
foam for comfortable custom fit
contouring, maximum warmth, and
resistance to packing out.
EZ Slide in System
Men’s & lady’s
Cuff Profiles
Easy Entry Tongue
Pull Strap
Easy Slide In System to facilitate boot
entry and exit.
Adaptable outer liner textiles for
improved liner to shell fit and function.
TRUFIT Custom Fit
System featuring Heat
Moldable Ulteva Foam
Heat System
Ready
Construction
Adaptive Comfort
“Stretch” Toe Box
MODELS:
Proton 12 (MS)
Surge (MS)
MODELS:
Kr PRO (MS)
Axion11 (MS)
Kr Kryzma (LS)
CUSTOM HEAT MOLDABLE
- Reduced Volume, High Performance Fit
- High Density (HD) ULTEVA Foam -Heat Moldable
- Adaptive Comfort Toe Box
- Lycra/Mesh Easy Slide In System (MS)
- TRUFIT Performance Insole
- Heat System Ready
- Reduced Volume, High Performance Fit
- High Density (HD) ULTEVA Foam -Heat Moldable
- Lycra/Mesh Easy Slide In System (P 12)
- Soft Synthetic Fur Collar Lining (Surge)
- Heat System Ready
MODELS:
Kr Il Moro (MS)
Kr Rampage (MS)
Proton 8 (MS)
Axion 7 (MS)
Aerro 70 (MS)
Kr Lotus (LS)
Electra 8 (LS)
Raya 7 (LS)
Aspire 70 (LS)
Kr Jakk (JR)
P 6 (JR)
MODELS:
Rave (MS)
Axion 5 (MS)
Aerro 60/50 (MS)
Raya 5 (LS)
Aspire 60/ 50 (LS)
P4/ Menace/Elle (JR)
CX (JR)
SX 1.7 (JR)
- Performance/Comfort Fit
- Medium Density (MD) ULTEVA Foam -Heat Moldable
- EZ Slide In System (Proton/ Axion/ Aerro)
- Soft, Synthetic Fur Collar Lining (Kr/Electra/Raya)
- TRUFIT Comfort Insole
- Heat System Ready
Microcell
Insulating Foam
footwrap
- Comfort Fit
- High Cushioned Lining Textile
- Multi Density Tec Lite Insulating Foam
- Microfleece or Velvetec quarter lining (LS & JR)
- ThermoForm Insole
- Heat System Ready (MS & LS)
9
page
MODELS:
Kr Cross (MS)
Proton 10 (MS)
Axion 9 (MS)
Aerro 80 (MS)
Kr Storm (LS)
Electra 10 (LS)
Raya 9 (LS)
Aspire 80 (LS)
- Tapered Volume, Performance Fit
- Medium Density (MD) ULTEVA Foam - Heat Moldable
- Lycra/Mesh Easy Slide In System (MS Models &
Electra)
- Soft, Synthetic Fur Collar Lining (Storm/Raya/Aspire)
- Heat System Ready
MODELS:
Vantage 4Factor (MS & LS)
Mx Super (MS & LS)
Dx Super (MS & LS)
RX 3.8 (MS & LS)
CXR (JR)
Rx 1.8 (JR)
- Comfort Fit
- High Cushioned Lining Textile
- Multi Density TecLite Insulating Foam
- Microfleece or Velvetec quarter lining (LS & JR)
- ThermoForm Insole
- Waterproof Construction
- Anti-bacterial/ Anti- Microbial Lining Treatment
FIT SYSTEM
PROCEDURE & GUIDELINES
Before you start
For your own safety, before you use the Therm-IC® FITSYSTEM, make sure you thoroughly read and understand the instructions manual accompanying the TRUFIT boot
heating device and follow all the recommended procedures. To insure that heating temperatures and times are correct and consistent for TRUFIT Custom Fit boot models,
we recommend ONLY the Therm-IC FITSYSTEM heating device, or the INTEC LH-3 Heat Machine. DO NOT USE: OVENS, HEAT GUNS, HAIR DRYERS, or FORCED
HOT AIR SYSTEMS not designed for TRUFIT boots, as they may damage the innerboot materials. Dalbello assumes no responsibility for damage to TRUFIT innerboots
caused by improper heating, or heating with equipment not recommended by Dalbello. ANY HEATING PROCEDURES PERFORMED ON TRUFIT BOOTS WITH
HEATING EQUIPMENT OTHER THAN THAT RECOMMENDED BY DALBELLO IS PERFORMED AT THE SHOP’S OWN RISK.
WARNING about heating Junior P6 Comp with TRUFIT innerboots
Junior P6 Comp uses a unique TRUFIT innerboot construction that required less heat to mold than adult TRUFIT innerboots. Excessive heat will damage the innerboot.
DO NOT HEAT JUNIOR P6 COMP BOOTS WITH INTEC LH-3 Heat Machine.
HEAT JUNIOR P6 COMP ONLY WITH THE Therm-IC FITSYSTEM. USE HEAT SETTING 1 FOR 10 MINUTES. Follow all other fitting procedures below.
Overview of TRUFIT Heating Procedure
NOTE: HEATING PROCEDURE TEMPERATURE AND TIME ARE IDENTICAL FOR ALL TRUFIT MODELS
1. The TRUFIT Heating procedure will require approximately 20 minutes time from start to finish.
2. The Therm-IC® FITSYSTEM Heating Device warms the ULTEVA foam material (Ceramic and/or Classic) inside the innerboot to the appropriate temperature for custom
forming around the contours of the customer’s foot.
3. Though the boot feels hot to touch, there is no discomfort and no physical danger.
4. After the boots have finished their heating cycle, you have approximately 1 - 2 minutes to put the boots on the customer’s feet.
6. ULTEVA foam molds to the foot and then cools very quickly. After standing in the boots and flexing gently for 5 - 6 minutes, the TRUFIT fitting
procedure will be finished. TRUFIT boots are ready for skiing immediately after the procedure has been finished.
6. In case of a mistake or problem during heating or fitting, it is possible to repeat the heating procedure up to 3 times.
Therm-IC® Fitsystem Operation
The Therm-IC® FITSYSTEM features two conical air flow tubes that direct the warm air into the ski boot. The air flow tubes may be rotated
360° around the the main electrical casing unit and, the tubes are designed to stop at 90° intervals. Do not attempt to “spread open” the
air flow tubes. When rotating, make sure the tubes are parallel to the main electrical casing unit.
1. Plug in the power cord.
2. Place ski boots on a horizontal surface (NOTE: it is NOT necessary to remove the innerboots or the innersoles
from the innerboots for this procedure. Position the air flow tubes in the ski boots (as shown in photo)
so that the air flow tube cones are seated as deeply into the boot as possible. Gently close the buckles on the
boot cuff to hold the air flow tubes in place. Make sure that the air intake holes (visible hole on the top of the air
flow tube cone) are not blocked, covered, or in any other way obstructed.
3. Switch on the device (I = on, 0 = off)
4. Select HEAT SETTING 2 - The Therm-IC® FITSYSTEM features two programmed heat/time
cycles. HEAT SETTING 2 is a 15 minute “high heat” cycle used for TRUFIT models. This
setting is activated by pressing the RED button which illuminates a RED LIGHT during the cycle.
HEAT SETTING 1 is a 10 minute “warm/dry” cycle functioning at a lower temperature. It is
activated by pressing the YELLOW button which illuminates an ORANGE LIGHT during the
cycle. HEAT SETTING 1 will NOT activate the thermomolding properties of TRUFIT innerboots.
Dalbello assumes no responsibility for damage to ski boots caused by improper use of the
Therm-IC® FITSYSTEM.
5. Do not leave the Therm-IC® FITSYSTEM unsupervised during the heating procedure.
6. After the heating cycle ends a 10 second series of “beeps” will sound and the heat supply and
circulating fan will automatically shut off. Switch off the device and remove the tubes from the
boots. Be careful to avoid touching the tubes, as they may be hot.
7. DO NOT IMMEDIATELY REPEAT THE HEATING PROCEDURE ON THE SAME PAIR OF BOOTS.
Heating Skiboots with Custom Insoles/Orthotics
Dalbello innersoles need not be removed from the innerboots for the heating procedure. In the event a replacement custom insole or orthotic device will be used, the
standard equipment Dalbello insole should be removed before performing the heating procedure. In order to avoid heat damage to the replacement insoles or orthotic
devices, we recommend performing the TRUFIT heating procedure without the insoles inside the innerboots. You may insert the replacement insoles into the boots
immediately after the heating cycle has finished and before your customer puts on the boots. Dalbello assumes no responsibility for damage to insoles or orthotic
devices due to excessive heat or other consequences of the TRUFIT thermomolding procedure.
10
page
ID THERMO
CUSTOM FIT
LINERS
◘100% Custom Heat Moldable Ultralon® EVA foam
◘ Factory Pre-Formed for Try-On
◘ Extremely lightweight - 70% lighter than
conventional liners
◘ Easy Entry Wrap Design -- No Tongue!
◘ Highly insulated - extremely Warm
◘ Waterproof
◘ Quick to dry when wet
◘ Highly resistant to compression, or “packing out”
◘ Uniform in density - no hard spots
◘ Non absorbent - resistant to taking odor
◘ Easy to clean
◘ Re-Moldable up to 4 Times
◘ Aegis™ Microbe Shield - Anti Microbial Treatment
THERMO Custom Fit
GOLD
MODELS:
Kr PRO ID (MS)
- High Density (HD) Ultralon® Foam
- Factory Pre-Formed for try-on
- New “Toe Box” Construction
- QuickWick Hi-Grip Nylon lining
- AEPE PowerWrap Reinforcement
- Extended Achilles Support Stay
- Men’s/ Unisex Sizing 24 - 29.5
THERMO Custom Fit
SILVER
& Il Moro
MODELS:
Kr IL MORO ID(MS)
Kr CROSS ID (MS)
- Medium Density (MD) Ultralon® Foam
- Microfleece Lining
- Men’s/Unisex sizing 24 - 29.5
I.D. Thermo Custom Fit Liners are uniquely engineered to be the
lightest and warmest custom fit ski boot liners in the world. I.D. Thermo
Liners feature a unique “wrap” construction that uses Ultralon® EVA
foam as its principle structural material. Ultralon EVA foam is
extremely light weight and durable, and is one of the most stable and
compression resistant innerboot foam materials in the world.
I.D. Thermo Liners are factory heat-formed to fit precisely into each
pair of Dalbello shells. This heat molding process insures an
absolutely perfect liner-to-foot-to-shell fit. There is absolutely no
relative movement between foot, liner, and the boot shell.
The factory heat forming process enables the boots to be tried on in
the store.
For the optimum comfort and performance fit, custom heat molding to
the customers’ feet is recommended.
MODELS:
Kr Kryzma ID (LS)
THERMO Custom Fit
GOLD LADY
- Woman’s last
- TARTAN plaid Nylon Lining
- Women’s Sizing 22 - 26.5
THERMO Custom Fit
ORANGE Proton
MODELS:
Proton 12 ID (MS)
Surge ID (MS)
- QuickWick Hi - grip Nylon lining
- Men’s/ Unisex Sizing 24 - 29.5
HEAT MACHINE
MODELS:
Kr Storm ID (LS) ID Thermo Liners are factory heat formed inside the
boot shells. It is not necessary to remove liners from the
boot shells during the machine heating cycle.
THERMO Custom Fit
SILVER LADY
- Women’s Last
- Medium Density (MD) Ultralon® Foam
- Microfleece Lining
- Low Profile Cuff
- Women’s sizing 22 - 26.5
11
page
CAUTION: DURING THE HEATING CYCLE THE HEAT MACHINE
COULD BECOME VERY HOT!
Please read all machine operation instructions carefully
before using.
1
2
3
PANEL CONTROL
!
1 TEMPERATURE ARE PRE SET.
SHOULD NEVER EXCEED 119 C/ 240 F
2 TIME CONTROL: set for 15 Minutes. Automatic
Heat Shut Off when cycle finishes.
3 ON/ OFF CONTROL
THERMO Custom Fit
BEGIN HERE
CUSTOM FITTING DALBELLO KRYPTON
WITH ID THERMO LINERS
Make sure you have selected the correct boot size. Shell fitting is recommended. Organize all the fit materials and components you will need: Sox, Toe Caps,
Insoles or Custom Footbeds.
FITTING PREPARATION
REMOVE INSOLES FROM LINERS.
DO NOT heat liners with stock insoles inside.
PLACE SKI BOOTS ON HEAT MACHINE
SET TIME/ TEMPERATURE: 15 Minutes @ DEFAULT TEMPERATURE
Default on Thermo Machine= 1-HIGH
Default on Intuition Machine= 115° C
START MACHINE. Automatic shut off when time cycle has finished
PREPARE FEET...
Inspect Feet. Pad Bone Spurs/ Protursions/ areas of extreme sensitivity with
adhesive padding (optional). Toe Caps On. For extra toe room, use double toe caps.
Lightweight, Over-the-calf socks are recommended. Pull up tightly over the calf. No
Wrinkles!
PREPARE INSOLE/ CUSTOM FOOTBED/ORTHOTIC
If custom insole is used, make sure it is trimmed to fit. Make sure custom insole can
resist deforming under high heat.
FITTING PROCEDURE
WHEN HEATING CYCLE FINISHES, REMOVE FIRST BOOT FROM MACHINE
Immediately after heat machine “Bell Tone” or “Buzz” sounds. Re-Start the Heat
Machine leaving other boot on to heat some more while you are fitting the first boot.
RE-INSERT INSOLE INTO THE LINER
Remove the first boot from the machine and insert the CORRECT INSOLE into the
liner. Work quickly. The liner may feel HOTto handle with bare hands. Use lightweight
cotton gloves, if necessary.
FIT SKI BOOT TO CUSTOMER’S FOOT
With customer standing, guide foot into into the first boot. Instruct the customer to
bend knee forward. Pull up on rear of liner. Instruct customer to strike heel firmly
against the floor. Pull up on the rear of the liner one more time. Wrap the lower underlapping panel of the liner first. Make sure panel is smooth against instep and shin.
Wrap overlapping panel again around instep and shin. Make sure panel is smooth
(no wrinkles).
CLOSE SKI BOOT BUCKLES & VELCRO
Quickly place Krypton Tongue in correct closure position. Close Buckles. Close
Velcro Powerstrap. NOTE: During Thermo Molding - the looser the buckle closure
tension, the tighter the fit. The tighter the buckle closure tension, the looser the fit.
Skiers desiring a higher volume (more relaxed) fit, should select the .5 size in the
model and use tight buckle closure tension.
FLEX, STRIKE HEEL, STAND STILL
Instruct customer to flex aggressively 2 – 3 times and strike the foot diagonally against floor towards the heel and flat against bootsole. Instruct customer to keep weight
evenly distributed across the entire bootsole. Repeat steps 6 - 9 with the OTHER
BOOT. Fitting is complete and boots may be removed from feet in 6 - 10 minutes, or
when cool to the touch.
© Copyright 2008 Dalbello Sports. All Rights Reserved.
12
page
D
albello’s women’s models share common constructions
with the men’s models, but are, in fact, dedicated designs that feature
unique dynamic functionality specifically enginereed for the performance
demands of women skiers. Dalbello women’s boots feature lady’s only
fit and function. Dalbello women’s innerboots use unique textiles and insulating materials that are relatively softer, warmer, and more cushioned
than corresponding men’s innerboots. In order to comfortably accomodate
the specific anatomical requirements of the women’s foot morphology, all
Dalbello women’s models feature tapered rearfoot lasting that fit women’s
foot shapes, as well as innerboot constructions that are narrower than
men’s models and feature luxurious fleece and “faux fur” lining textiles.
All models in Dalbello’s women’s collection also use structural materials
that are lighter weight and more flexible than those used in corresponding
men’s models.
Lady Last
Dalbello builds its women’s boots on carefully crafted
shoe forms (lasts) that are enginereed to provide a
unique fit and size profile optimized for a women’s
unique foot characteristics. Dalbello’s “Lady Lasts”
are developed to comfortably fit the contours the foot
and to provide support and cushioning for all day
comfort. Compared with men’s last, they are narrower
in the heel, proportionally wider in the forefoot, and
have a higher instep.
High Tech Personalization
All Dalbello women’s models feature a combination of
adjustments for fit and performance personalization:
forward flex control, forward lean control, boot height
adjustment, cuff volume circumference, walk/ski control,
canting, fore/aft balance, heel lift, and heel hold.
Low Contour Profile Geometry
Dalbello women’s model innerboot cuffs and rear
spoilers are 0.5 cm - 1.5 cm (depending on model)
lower that men’s cuffs. Low contour profile geometry
cuffs are engineered to close comfortably and easily
around a wide variety of women’s lower leg shapes
and sizes.
Heel Inclinator
Select Dalbello Raya and Aspire models feature an
adjustable heel height mechanism. Raising or lowering
the heel inside the boot can improve rearfoot and ankle
comfort for some skiers. Changing foot angle also
changes fore/aft balance which can improve ski
response and turn initiation for some skiers.
Cuff Volume Expansion X-Module
Circumference of rear cuff spoiler on RAYA models
9/7/5 may be increased to accommodate varying
lower leg volumes and/or shorter leg lengths.
Aspire models 80/70/60 feature a removable cuff
insert (X-Module Insert) that expands the boot top
opening circumference approximately 5 cm and
lowers the overall boot height by 1.5 cm.
Soft, Warm Textiles
All Dalbello women’s innerboots use structural materials
that are lighter and more flexible than those used in
corresponding men’s models. Women’s innerboots
feature luxurious fleece and “faux fur” lining plus
additional insulating materials fro greater warmth,
and comfortable cushioning.
13
page
ID Thermo
Custom Fit
Liners
4
Hyper Band
Closure Cuff
Flex Control
(inside boot
cuff)
3
4
5
Slap Ratchet
Cuff Buckle
Kinetic Response
Interchangeable
Tongues
3
Dynalink
Rearfoot
Retention
System
Forward Lean
Control
2
6
7
Inverted
Forefoot
System
5
Cabrio Design
3 Piece
Tecnhology
Low Cuff
Hinge
8
1
Twin Axis
Canting (Shaft
Alignment)
8 “Landing Gear Footboard”
1
(Completely Disassemble)
Cabrio Design 3 Piece Technology
5
Slap Ratchet Closure
Dynalink
6
Modular Assembly
High performance shell/cuff/tongue architecture that
provides uniform foot and lower leg closure with total
support. Developed for comfortable, precise foothold with
smooth and progressive forward flex.
2
6 Modular Assembly
Exclusive Dalbello Technology: independently functioning
heel/instep closure strap provides positive foothold and
rearfoot security. Dynalink effectively minimizes foot sliding,
heel lift, and boot shell distortion during flex.
To Close/Tighten: Feed the ratchet strap into the connector
assembly and tighten the strap by rotating the buckle lever
in a ratcheting manner. To Loosen/Release: pull the spring
loaded, dual pronged, connector tab vertically, and slide the
ratchet strap away from the buckle lever assembly using
one continuous motion.
(may be completely disassembled)
100% Quick Change Design. All buckles, tongues, spoilers,
powerstraps, hinges, and adjustments hardware are
mounted with T-nut Bolt assembly. NO RIVETS! Boot may
be completely disassembled with allen wrenched, or, hex
tool, for easy customization and servicing.
Hyper Band Cuff Closure Assembly
UNIQUE DALBELLO DESIGN.Low friction, wide profile shin pad
3 closure securely wraps the upper part of the boot cuff with a high
7
Inverted Forefoot Buckle
8
“Landing Gear” Footboards
(Anti- shock)
leverage ratchet strap buckle assembly. EXTREMELY
VERSATILE FIT AND FUNCTION. The buckle may be adjusted
loosely for enhanced boot top articulation, or, snug it down
securely for more traditional all terrain performance.
I.D. Thermo Custom Fit Liners
4 I.D. Thermo “Il Moro” Liner with Medium Density Ultralon Foam
for comfort, warmth and shock absorption. Pre-formed to be
tried on right out-of-the-box. Or, they may be 100% custom heat
molded for a perfect custom boot fit. Ultralon® EVA foam layup is
extremely durable, and they are lightest and warmest innerboots
in the world. Easy to clean: mild detergent & water. Allow to air
dry. Avoid excessive exposure to heat. Refer to pages 11 & 12 for
more information.
Forefoot closure buckles (above instep) are inverted to close
on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides,
grinds, falls, and transitions.
For enhanced shock absorption on big air landings or on hard
snow surfaces. Landing Gear footboard is a full lenght vibration
absorbing urethane innerboot platform that is positioned inside
the bootshell, under the foot. Closed cell construction will not
compress or lose its shock absorbing properties.
3
Kinetic Response Tongues
6
Forward Lean Control
4
Flex Control
8
Twin Axis Canting
5
Low Cuff Hinge
All Refer to Krypton technology page 16
14
page
Il Moro/ Freeski Sales and Technical Data
Freeski Series skier profile
Developed for original and unique personalities who value individuality over conformity. Targeted for competitive advanced level freeride skiers, big mountains
skiers, pros, park & pipe specialists, and those aspiring to be. Close fitting. Quick. Responsive. Shock Absorbing. Featuring exclusive World Cup and X-Games
Championship proven technology.
What are the 5 key features of Il Moro?
1. Exclusive Design - Expressly for Freeski
An original design - there is no other ski boot like IL Moro. More than three years in development by Glen Plake and Dalbello engineers, Il Moro has all the right
ingredients for top performance on and off piste, as well as in the park and pipe. Il Moro features 3 piece Cabrio Design architecture to cradle, stabilize, and protect
the foot while permitting a smooth and natural flex for balance and control. Highly versatile “HYPER BAND CUFF” allows the rider to easily and precisely control
boot top support and closure. Crank the slap ratchet buckle tightly for all the support and control needed for extreme big mountain riding. Lighter tension on the
buckle allows a greater range of flexing motion and leg articulation for park jibs and jumps.
2. Maximum Support, Shock-Absorption, Protection
Fundamentally developed for aggressive and competitive riders seeking to minimize the risk of injury and keep them in top riding form. Anatomically lasted shell
and innerboot forms are shaped to support and comfortably cradle the foot. Dalbello’s exclusive Dynalink System holds the foot securely and prevents it from
sliding forwards and backwards inside the shell giving the rider more stability, protection, and control. Closed cell urethane foot boards (Landing Gear) and Kinetic
Response shell tongue absorbs impacts and dissipate shocks to the foot and shin that may occur on big air landings.
3. Lightweight Construction
Cabrio design featuring lightweight and resilient Polyether (Transparent) shell, Polyurethane cuff, and Polyamide nylon tongue with super lightweight ID Thermo
Liners. Reduced weight design enhances responsiveness and sensitivity while reducing fatigue for.
4. Highly Versatile Performance and Personalization
Il Moro features the most sophisticated and versatile adjustability of any high performance ski boot on the market today. Riders may completely customize and
personalize performance. Forward flex control, forward lean control, dual axial canting, height adjustable rear cuff spoiler, interchangeable tongues, on the fly
slap ratchet cuff closure adjustability, modular arch support inserts. And... the entire ski boot may be completely and easily disassembled to permit custom boot
modifications, service, and repair.
5. I.D. Thermo & TRUFIT Custom Fit Systems
Il Moro for 2008 is available with a fit system option; either ID Thermo Custom fit or, TRUFIT Custom Fit: I.D. Thermo Custom Innerboots (Il Moro - MD) features
a unique and patented “wrap” construction utilizing ultra-lightweight, 100% custom heat moldable, ULTRALON® EVA foam. I.D. Thermo innerboots are custom
heat formed to fit every anatomic contour of the skier’s foot and lower leg. The unique material enhances sensitivity and provides superior shock absorption and
insulation.
TRUFIT Custom Innerboots (Sport – Medium Density) feature a more traditional construction and are designed to fit right out of the box. They may also be
optionally custom heat molded to the skier’s foot.
Men’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
UNI: 23.0 - 29.5
Cement/ Military green
Cement/ Black
UNI: 24.0 - 29.5
Gold Bling/ Black
Cabrio Design, D-62 P.E. Transparent Shell, Kinetic Response
Tongues (P.A. - B & C), Hyperband Cuff Closure, Dynalink DC
Rearfoot Retention System (Cable), F-101 ALU Buckles - 2 Micro,
Inverted Forefoot Buckle, Slap Ratchet Cuff Buckles
Il Moro ID: ID Thermo Il Moro Custom Fit Liner (MD)
Il Moro: TRUFIT Sport MD Custom Fit Liner
Forward Lean Control Landing Gear Footboard (anti-shock)
Flex Control
Twin Axis Canting
Interchangeable Tongues (2)
Carry Chain
98
SURGE (PR)
SURGE I.D. (PR)
RAMPAGE (KR)
IL MORO (KR)
Cabrio Design, D-59 P.U. Shell, Kinetic Response Tongue
(P.A. - C), Dynalink DC Rearfoot Retention System (Cable)
F-101 ALU Buckles - 3 Micro, Inverted Forefoot Buckle
TRUFIT Sport MD Custom Fit Liner
Flex Control
Twin Axis Canting
VARIO
FR
Landing Gear Footboard (anti-shock)
“Ride” Tongue - Medium “C” Flex
98
FLEX
millimeter
MS: 24.0 - 29.5
Transparent/ Black
FLEX
millimeter
80 - 110
FR
TP
TP
FLEX
FLEX
Women’s Models
Construction
Cabrio HP
Design , Polytec Lite Shell/Cuff, P.U. Tongue
Dynalink System, F-90 Alu Buckles - 4 Micro, Inverted
Forefoot Buckles, Anti-shock Heels FLEX
Fit System
Supercomfort Liner
Adjustments
Flex Control
SC
HP
Construction
FLEX
Adjustments
Flex Control
Twin Axis Canting
Target skier
Last
Flex Index
SC
VARIO
FLEX
15
page
FLEX
Cabrio Design, D-59 P.U. Shell, Kinetic Response Tongue (P.A.
HP DC Rearfoot Retention System (Cable), F-101
- D), Dynalink
ALU Buckles - 3 Micro, Inverted Forefoot Buckle, Women’s Low
FLEX
Contour Profile Cuff
AR
FLEX
FR
LS: 22.0 - 26.5
White/ Oyster
TRUFIT Sport Lady Custom Fit Liner
FLEX
FLEX
103
millimeter
FLEX
Fit System
AR
AR
Target skier
Last
Flex Index
110
FR
LOTUS(KR)
LOTUS
I.D. (KR)
TP
RAVE
Men’s Models
FLEX
101
millimeter
FLEX
FLEX
MS: 25.0 - 30.5
Cement/ Black
Classic Overlap, Bi-Injected D-62 P.E. Transparent Shell/
Cuff, Carbon Spoiler, F-101 ALU Buckles - 4 Micro, AntiShock Heel Insert
Surge: TRUFIT Team Pro (HD) Custom Fit Liner
Surge ID: I.D. Thermo “Orange” (HD) Custom Fit
Twin Axis Canting
A.S.P. - Adjustable Spoiler Profile
Modular Heel Cup Inserts
SC
Landing Gear Footboard (anti-shock)
FLEX
“Lady” Tongue
- Soft “D” Flex
98
FLEX
millimeter
70 - 100
FR
FLEX
Flex Control
(inside boot
cuff)
4
Dynalink
Rearfoot
Retention
System
2
Kinetic
Response
Tongue
Cabrio Design
3 Piece
Tecnhology
Forward Lean
Control
6
3
1
8
5
Low Cuff
Hinge
1
8
Twin Axis
Canting (Shaft
Alignment)
5
High performance shell/cuff/tongue architecture that provides
uniform foot and lower leg closure with total support.
Developed for comfortable, precise foothold with smooth
and progressive forward flex.
2
4
Low Cuff Hinge
High leverage rear cuff hinges very low on the boot shell
to follow the natural anatomic movement of the leg during
dynamic flex. Skiers experience more power and more
control while expending less energy during skiing.
FORWARD LEAN control wedges may inserted at boot rear
Dynalink
6 between lower shell and cuff to change forward inclination
Exclusive Dalbello Technology: Independently functioning
heel/instep closure strap provides positive foothold and
rearfoot security. Dynalink effectively minimizes foot sliding,
heel lift, and boot shell distortion during flex.
angle. There are two different FL inserts
Inclination Angles:
KR models with 4 mm insert = 15°
KR models with 8 mm insert = 13°
KR models WITHOUT insert = 11°
Kinetic Response Tongue
3
Interchangeable Footboards
Highly resilient polyamide (P.A. nylon), flex ribbed, tongue design
stays in total contact with the leg throughout flex for improved
responsiveness and control. Interchangeable design.
Race Tongue HARD FLEX (Code “B”)
D 65 Polyamide (Tongue on Pro & Kryzma, option on Il Moro)
Ride Tongue MEDIUM FLEX (Code “C”)
D 59 Polyamide (Cross, Il Moro, Rampage ,Storm, option on Pro, Kryzma)
LadyTongue SOFT FLEX (Code “D”)= D 52 polyamide (tongue on Lotus)
7 Krypton Pro is equipped with TWO sets of footboards (located
Flex Control
8
To regulate forward flex stiffness and and range of flexing motion,
a modular FLEX CONTROL bridge inserts into rear lower shell
(behind achilles). Three flex settings:
SOFT: No Bridge Inserted
MEDIUM: Bridge inserted in LOW position.
STIFF: Bridge inserted in HIGH position.
To Adjust: pull tab forward and slide bridge up or down
inside bootshell under the liner).
POWERSOLE: High density (stiff) Urethane for power,
sensitivity, and maximum control. (Standard Footboard on
Pro, Kryzma)
LANDING GEAR: Elasticed (flexible) Urethane for
Cushions big air landings. (Standard Footboard on Il
Moro,Cross, Rampage, Lotus & Storm; optional footboard on
Pro, Kryzma)
Twin Axis Canting
Three different sizes of Cant Bushings may be interchanged
on inside and outside cuff hinges to align lateral cuff to the
skiers lower leg. For specific cant angle information, refer to
table below.
TO ALIGN CUFF TO SKIERS LOWER LEG
When adjusting forward flex using the Flex Control Bridge system, be aware that there
are TWO DIFFERENT flex bridges. The different bridges are marked #4 and #8.
4
4
USE # 4 FLEX CONTROL BRIDGE when:
- NO Forward Lean Wedge is being used
- 4 mm Forward Lean Wedge is being used
7 Interchangeable Footboards
8
Inside
8
USE # 8 FLEX CONTROL BRIDGE when:
8 mm Forward Lean Wedge is being used
Outside
Cuff Hinge
16
page
Krypton Series Sales and Technical Data
Krypton Series skier profile
Developed for top level advanced to competitive level freeride skiers, skiing professionals, park & pipe specialists, and those aspiring to be. Close fitting. Quick.
Responsive. Powerful. Krypton is Dalbello’s top performance series featuring World Cup Racing proven technology.
What are the 5 key features of Krypton boots?
1. Cabrio Design - 3 Piece Overlap Construction
Cabrio Design derives it name from its assembly architecture, which is completely open above the instep and in front of the tibia (open top = cabrio). Cabrio
Design combines a shell/cuff/tongue assembly to complete the ski boot structure. This configuration permits the use of stiffer and thicker materials for the lower
shell which amplify the skiers’ power, leverage, and energy to the ski permitting skiers to ski more powerfully and efficiently while expending less energy. The
Krypton Cabrio Design also permits the cuff & tongue of the boot to move smoothly and consistently with the leg during forward flex, while lateral & medial support
remain invariable (no shell bulge or distortion). The result: responsiveness, power, and stability with unmatched smoothness and shock absorption.
2. Dynalink Rearfoot Retention
An independently functioning heel/instep closure strap (Dynalink Band) is fixed to the inside of the boot at the hinge rivet. On the lateral side of the boot, the buckle
is mounted to the the lower boot shell instead of to the cuff, permitting the cuff to move independently of the buckle/band assembly. As the boot is flexed, foot
hold is secure and lower bootshell distortion is minimized. Dynalink provides superior foothold to skiers with lower volume feet, and/or for skiers who prefer softer
flexing boots that do not compromise positive foothold.
3. Kinetic Response Tongue
External shell tongue that is constructed from a very resilient and responsive polyamide nylon material. The KR Tongue features two molded-in “flex ribs” that
permit the tongue to close, adapt, and flex naturally with any instep height and/or leg calf circumference. Responsiveness and sensitivity are improved because
the highly resilient “KR Tongue” always stays in direct contact with the skier’s shin through flexing movement..
4. Highly Versatile Performance and Personalization
Krypton models feature the most performance adustability and personalization of any high performance ski boots available. Forward flex control, forward lean
control, dual axial canting, height adjustable rear cuff spoiler, interchangeable tongues, interchangeable footboards, modular arch support inserts. Krypton models
also feature a completely modular design - the entire ski boot may be completely and easily disassembled to permit custom boot modifications, service, and
repair.
5. TRUFIT & I.D THERMO Custom Fit Systems
All Krypton models for men and women feature TRUFIT Custom Fit Innerboots. Three different TRUFIT Constructions are featured. Different TRUFIT
constructions use different density Ulteva fitting foam for varying foothold and power transfer characteristics. All TRUFIT innerboots are designed to fit right out
of the box, or, they may be optionally custom heat molded. For 2008/2009, select Krypton models for men and women are available with Dalbello’s 100% Custom
Heat Moldable ID Thermo Custom Fit System. ID Thermo Liner Custom Fit System. I.D. Thermo Liners feature a unique and patented “wrap” construction utilizing
multiple densities of anatomically moldable Ultralon® EVA foam. I.D. Thermo Liners are precisely and accurately custom heat formed to fit every anatomic contour
of the skier’s foot and lower leg.
Men’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
KRYPTON PRO
KRYPTON PRO I.D.
KRYPTON CROSS
KRYPTON CROSS I.D.
UNI: 24.0 - 29.5
Lime Green/ Black
MS: 24.0 - 29.5
Black Transparent
Cabrio Design, D-62 P.U. Shell, Kinetic Response Tongue (P.A. - B & C)
Dynalink DC Rearfoot Retention System (Cable), F-100 ALU Buckles - 3 Micro
Cabrio Design, D-62 P.E. Transparent Shell, Kinetic Response Tongue (P.A. - “C”), Dynalink
DC Rearfoot Retention System (Cable), Performance Footboard, F-100 ALU Buckles - 3 Micro
KR Pro: TRUFIT Comp (HD) Custom Fit Liner
FLEX
KR Pro ID: I.D. Thermo “Gold” (HD) Custom
Fit
Forward Lean Control Interchangeable Footboards (2)
Flex Control
Interchangeable Tongues (2 - “B” & “C” Flex)
FR
Twin Axis Canting
Adjustable Cuff Spoiler
Cross: TRUFIT Performer (MD) Custom fit liner
FLEX
Cross ID: ID Thermo “Silver” (MD) Custom
fit liner
Forward Lean Control Adjustable Cuff Spoiler
Flex Control
FR
Twin Axis Canting
98
millimeter
FLEX
98
millimeter
100-140
TP
KRYPTON KRYZMA
KRYPTON KRYZMA I.D.
KRYPTON STORM
KRYPTON STORM I.D.
LS: 22.0 -26.5
Dark Chocolate/ Black
LS: 22.0 -26.5
Bordeaux Transp./ White
FLEX
HP
HP
Construction
FLEX
Cabrio Design, D-62 P.U. Shell, Kinetic Response Tongue (P.A. - B & C), Dynalink DC
AR
Rearfoot Retention System (Cable), F-100 ALU Buckles - 3 Micro, Lady Fit & Function
FLEX
Fit System
Adjustments
Target skier
Last
Flex Index
90-120
TP
FLEX
Women’s Models
FLEX
KR Kryzma: TRUFIT Comp Lady (HD) Custom Fit Liner
FLEX
KR Kryzma ID: I.D. Thermo “Gold” Lady
(HD) Custom Fit
SC
Forward
Lean Control Interchangeable Footboards (2)
Flex Control
Interchangeable Tongues (2 - “B” & “C” Flex)
FR
Twin Axis Canting
Adjustable Cuff Spoiler
98
millimeter
Cabrio Design, D-62 P.E. Transparent Shell, Kinetic Response Tongue (P.A. - “C”),
AR
Dynalink
DC Rearfoot Retention System (Cable), F-101 ALU Buckles - 3 Micro,
Performance Footboard, Women’s Low
Contour Profile Cuff, Lady Fit
FLEX
KR Storm: TRUFIT Performer Lady (MD) Custom Fit Liner
FLEX
KR Storm ID: I.D. Thermo “Silver” Lady
(MD) Custom Fit
SC
Forward
Lean Control Flex Control
FR
Twin Axis Canting
FLEX
98
millimeter
80-120
TP
FLEX
FLEX
75-105
TP
FLEX
17
page
HP
FLEX
HP
A.S.P.
Adjustable
Spoiler Profile
3
Carbon Spoiler
Reinforcement
Twin Axis
Canting
(Shaft
Alignment)
4
5
8
Actiflexor Energy
Booster (not
visible)
Classic Overlap
Design (2 Piece
Shellfit)
Locked Power
Cuff
1
2
6
Bi-Injected
Construction
7
Modular Heel
Cup
Proton 12 Carbon
1
Classic Overlap Design
2
Bi-Injected Construction
OUTSIDE
Adaptable to many feet shapes due to their variable volume
fitting versatility. Overlap designs hold the skier’s foot and
leg in a strong and balanced stance position, permitting
energy and leverage to be transferred from the skier’s feet
and legs to the skis for precise performance and control.
5
INSIDE
Two different density plastics fused into one structure: HARD
for control & support, SOFT for fit and comfort. Hi-tech,
bi-injected construction provides the optimum balance of
support, control, and shock absorption with flexible,
ergonomic, boot opening panels for easy-on/easy-off
convenience.
3 Modular rear boot cuff spoiler adapts the boot cuff to a variety
6
Carbon Spoiler Reinforcement
Permits skiers to align the lateral inclination of the upper cuff
to the skier’s leg. Outside Hinge Cant: Using 5mm Hex Tool,
rotate the mechanism clockwise, or counterclockwise, to align
boot cuff to desired position (inwards/outwards)Inside Hinge
Cant: Use 4mm Hex Tool to loosen cant lock screw. (2) Rotate
adjuster to align boot cuff to desired position. Re-Tighten lock
screw.
Twin Canting only on p 12, Surge, p 10, e 10
Locked Power Cuff
Upper cuff is securely fixed to the lower shell with a twin
T-Nut/Bolt assembly. The locked cuff feature boosts rear
support and minimizes rear cuff flex. Skiers find the boot is
for more responsive, more powerful, and more precise.
7
Modular Heel Cup
Insert heel cup in boot board (between shell & innerboot) to
accommodate narrow heels and to tighten rearfoot fit.
(in box)
8
(Proton 12 Carbon & Surge Only)
Canting & Twin Axis Canting
(Proton 12 Carbon Only)
of lower leg shapes. Spoiler Permits skiers to increase rear
cuff height, add rear support and change forward lean (1)
Remove Innerboot (2) Using 4 mm Hex Tool, remove Velcro
Strap Mounting Screw and T-Nut Assembly (3) Place the
spoiler at the desired height (LS=Low, MS=High)
4) Re-Attach Velcro & Mounting Hardware
4
Electra 10 for Women
Actiflexor Energy Booster
The two lateral “actiflexors” (located behind achilles tendon
zone at rear of lower shell) store energy during boot flex and
create rebound when the boot straightens giving the skier
added power, sensitivity, and resposiveness.
Designed to add power and support to the rear cuff to
improve control and responsiveness at higher speeds on
hard snow surfaces.Carbon Fiber Spoiler reinforcement is
fused into the cuff’s structure during molding. A permanent
bond is formed creating total rear cuff rigidity.
18
page
Proton & Electra Series Sales and Technical Data
Proton and Electra Series skier profile
The Proton Series for Men and the Electra Series for Women were developed for accomplished and improving performance and freeride skiers seeking a traditional 4 buckle, classic overlap high performance ski boot that delivers firm foothold, powerful and immediate response, maximum sensitivity and unsurpassed
snow feel.
What are the 5 key features of Proton boots?
1. Classic Overlap Design - Traditional 4 Buckle Shellfit
The most common ski boot construction architecture, Proton & Electra models feature a traditional 4 buckle closure overlap construction ski boot. Overlap Design
refers to the functionality of the boot’s lower shell and upper cuff. Both structural components incorporate overlapping flanges, or panels, that slide across one
another closing the boot around the foot when the boot buckles are tightened. Different feet shapes and volumes are comfortably accommodated by varying the
closure volume of the plastic shell and cuff around the foot and lower leg. Classic Overlap ski boots are efficient constructions that provide an accurate and precise
fit with exceptional power and control for the skier.
2. Bi-Injected Construction
All Proton and Electra models feature high tech, state of the art, bi-injection technology that integrates two different density materials into a single structure.
Flexible and resilient polyether plastic surrounds the foot. Its elastic wrapping properties provide shock absorption as well as uniform foot closure for a precise and
comfortable fit. A harder polyurethane plastic surrounds and reinforces the softer “under shell” in the critical support zones, providing power, rigidity, and support
for maximum performance and control. The result: a perfect blend of precise fitting power, comfort, and shock absorption.
3. Balanced Stance
All Proton and Electra models feature a “new tech” relaxed stance featuring a lower heel and more upright cuff angle than that typically found in conventional
high performance ski boots. This “new tech” balanced stance facilitates movement patterns that make skiing easier, less fatiguing, and more comfortable.
This is the NEW stance geometry that better skiers have discovered makes their new skis perform better.
4. High Performance 101mm Last. Fits Medium Volume Feet
Proton models for men feature Dalbello’s new 101 mm last; a modern last shape generous in forefoot volume for comfort, but featuring an extreme taper in the
rearfoot for superior foothold and support. The fit and foothold is very versatile. Electra models for women feature Dalbello’s new, WOMEN’S SPECIFIC, performance last that is slightly lower in overall volume and height to accommodate the morphological differences in women’s feet and lower leg anatomy.
5. TRUFIT Custom Fit Systems
All men’s and women’s Proton and Electra models are available with TRUFIT Custom Fit Innerboots. TRUFIT is the industry’s most widely imitated ski boot
custom fit system.TRUFIT innerboots are engineered to fit the skier correctly and comfortably right out of the box. Or, the innerboots may be custom heat formed
with a quick and easy heat molding procedure performed in the ski shop. For 2008/2009, Proton 12 Carbon and Surge are available with optional I.D. THERMO
CUSTOM FIT Innerboots. I.D. Thermo Custom Fit Innerboots feature ULTRALON® EVA foam, and are custom heat formed to fit every anatomic contour of the
skier’s foot and lower leg. The unique material enhances sensitivity and provides superior foothold, shock absorption and insulation.
PROTON 12 CARBON
PROTON 12 CARBON I.D.
Men’s Models
Construction
Fit System
Adjustments
MS: 24.0 - 29.5
Orange Transp./ Orange
PROTON 10
PROTON 8
MS: 24.0 - 29.5
Red Transp./ Red
MS: 24.0 - 29.5
Black/ Red Transp.
White/ Orange Transp
FLEX
Classic Overlap, Bi-Injected D-62 P.E. Transparent Shell/
Cuff, F-101 ALU Buckles - 4 Micro
p12 Carbon: TRUFIT Team Pro (HD) Custom Fit Liner
p12 Carbon ID: I.D. Thermo “Orange”FLEX
(HD) Custom Fit
Twin Axis Canting
A.S.P. -FR
Adjustable Spoiler Profile
Modular Heel Cup Insert
TRUFIT Performer (MD) Custom Fit Liner
TRUFIT Sport (MD) Custom Fit Liner FLEX
Twin Axis Canting
TP
Canting
TP
101
millimeter
Target skier
Last
Flex Index
FR
120
101
millimeter
FLEX
100
HP
HP
FLEX
Women’s Models
Classic Overlap, Bi-Injected D-62 P.E. AR
Transparent Shell/
Cuff, Carbon Spoiler, F-101 ALU Buckles - 4 Micro, AntiShock Heel Insert
Surge: TRUFIT Team Pro (HD) Custom Fit Liner
Surge ID: I.D. Thermo “Orange” (HD) Custom Fit
SC
Twin Axis Canting
FLEX
110
FR
AR
LS: 22.0
- 27.5
Bordeax Transparent/
Bordeaux
90
HP
FLEX
AR
LS: 22.0
- 27.5
Storm Blue Transp./Silver
Black/ Oyster
FLEX
FLEX
FLEX
ClassicSC
Overlap, Bi-Injected D-62 P.E. Transparent Shell/
Cuff, F-101 ALU Buckles - 4 Micro, Lady Fit
ClassicSC
Overlap, Bi-Injected D-59 P.U./P.E. Transparent
Shell/Cuff, F-101 ALU Buckles - 4 Micro, Lady Fit
Fit System
TRUFIT Performer (MD) Lady CustomFLEX
Fit Liner
TRUFIT Sport (MD) Lady Custom Fit FLEX
Liner
Adjustments
Twin Axis Canting
A.S.P. -FR
Canting
ModularTP
Heel Cup Insert
Construction
FLEX
Target skier
Last
Flex Index
FR
101
millimeter
FLEX
90
TP
FLEX
19
101
millimeter
HP
FLEX
85
HP
FLEX
FLEX
page
TP
FLEX
ELECTRA 8
ELECTRA 10
MS: 24.0 - 29.5
Transparent/ Black
101
millimeter
FLEX
FLEX
SURGE (PR)
SURGE I.D. (PR)
FR
FLEX
FLEX
TP
101
millimeter
FLEX
Classic Overlap, Bi-Injected D-59 P.U/P.E. Transparent
Shell/Cuff, F-101 ALU Buckles - 4 Micro
Classic Overlap, Bi-Injected D-65 P.E. Transparent Shell/Cuff,
Carbon Spoiler, Locked Cuff, F-100 ALU Buckles - 4 Micro
AR
Axion 11 for Men
1
Cabrio Design
3 Piece
Tecnhology
Easy Entry
Tongue
Pull Strap
1
Dynalink
Rearfoot
Control
High performance shell/cuff/tongue architecture that
provides uniform foot and lower leg closure with total
support. Developed for comfortable, precise foothold with
smooth and progressive forward flex.
2 Position Flex
Control
8
2
2
Flex control permits skiers to change the boots resistance
to flexing to adapt to skiers’ dynamic performance
preferences and different skiing conditions.
Hard: for more aggressive skiing and/or snow conditions
Soft: for less aggressive skiing, terrain, and snow
surfaces.
Two position flex selectivity (HARD & SOFT) plus a
WALK/SKI feature. HARD mode is recommended for
more aggressive skiers, and is approx. 15% stiffer in
forward flex than the SOFT mode. The WALK setting
disengages the cuff lock function to allow the cuff to
hinge backwards for ease of entry and exit. DO NOT
SKI WITH BOOT IN WALK MODE.
4
7
Canting
(Shaft
Alignment)
Ramp Angle
Inclinator
Raya 9 for Lady
5
Cuff Volume
Expansion
Adjustment
(Featuring Unique Lady’s Cuff Construction)
8
2 Position
Flex Control
+ Walk/ Ski
Mechnism
Heel/Instep closure assembly to control foothold and
stability. Heel closure band and buckle are fixed to
lower shell (instead of cuff) to hold the foot firmly and
minimize shell distortion during boot flex.
Adjustable buckle rack (DC rack) may be re-positioned
to shorten/ lengthen range of instep buckle cable
closure (Axion 11 & 9 Only)
Canting & Shaft Alignment
6
Cuff Volume Expansion
7
Ramp Angle Inclinator
3
4
+ 8
5
RAYA MODELS ONLY - Rear cuff spoiler may be
adjusted to accommodate varying lower leg volumes
and/or shorter leg lengths. To Increase Cuff Volume
Circumference: Remove both spoiler adjustment T-Nut
screws. Move spoiler to the “open” (wide) position.
Replace t-nuts/screws in the second set of
corresponding holes.
Raising or lowering the ramp angle inclinator (heel lift) can
improve heel and ankle comfort for some skiers with boot
fit problems. It may be necessary to experiment with this
adjustment to find the proper position for optimum balance
and control. To adjust: Use the 4mm Hex Tool to turn
the adjustment screw on the lateral side of the bootsole.
CLOCKWISE to raise, COUNTERCLOCKWISE to lower.
Easy Entry Tongue Pull Strap
High strength nylon web pull strap is integrated into the
rim of the innerboot tongue to help pull the boots on
easily. WARNING: DO NOT CARRY ski boots by the
Easy Entry Tongue Pull Strap.
7
Canting
(Shaft
Alignment)
Dynalink
To align the boot cuff comfortably to the skiers leg. Use
the 5 mm Hex Tool to adjust. Rotate the mechanism
clockwise to tilt the cuff towards the inside edge, or
counterclockwise to tilt the cuff towards the outside
edge.
6
Dynalink
Rearfoot
Control
2 Position Flex Control
3 2 Position Flex + WALK Mechanism
4
5
Easy Entry
Tongue
Pull Strap
Ramp Angle
Inclinator
20
page
Axion and Raya Series Sales and Technical Data
Axion & Raya Series skier profile
Developed for ambitious and athletic performance oriented freeskiers seeking versatile fit with a balanced stance. New Axion Series for men incorporates many of the structural
and performance features of Krypton. New, relaxed fit, 103mm fitting last fits a wide variety of foot shapes with firm foothold and smooth, progressive flex. The Raya series is
uniquely engineered and lasted for women seeking all day comfort and warmth. Easy on/off Cabrio Design architecture is exceptionally lightweight and easy to flex.
What are the 5 key features of Reflex & Raya boots?
1. Cabrio Design - 3 Piece Overlap Shellfit
Axion for men and Raya for women models feature “Cabrio Design” construction. Cabrio Design features an open throat “cabrio” lower shell & tongue assembly
for more fitting versatility to accommodate the widest variety of foot shapes (low/high instep, low/medium/high overall volume). Cabrio design also features a
very rigid laterally supportive lower shell for quick and precise transfer of power to the ski edges. Skiers will experience more precision and power in their skiing
with a naturally balanced stance for more relaxed skiing and greater comfort.
2. Two Performance Constructions
All Raya models for women feature a specifically engineered “women’s only” design. Special Raya cuff constructions are lower than comparable men’s cuffs and
provide unique fitting versatility for all leg shapes with stability, support, and exceptional comfort. For personalized performance, all Raya models feature two
position flex control plus an integrated walk/ski mechanism for easy walking and extra comfort. The new AXION for men features a low hinging performance cuff
that is geometrically modeled after the top performing Krypton design. Developed for ambitious and improving all mountain skiers, the Axion construction is firm
and supportive in the leg shaft for improved power, quickness, and responsiveness.
3. Dynalink Rearfoot Stabilizer
An independently functioning heel/instep closure strap (Dynalink Band) is fixed to the inside of the boot at the hinge rivet. On the lateral side of the boot, the buckle
is mounted to the the lower boot shell instead of to the cuff. permitting the cuff to move independently of the buckle/band assembly. As the boot is flexed, foot
hold is secure and lower bootshell distortion is minimized. Dynalink provides superior foothold to skiers with lower volume feet, and/or for skiers who prefer softer
flexing boots that do not compromise positive foothold.
4. Special Lady’s Only Fit & Function
All Raya models feature special “Lady’s Only” fit and function. (1) Special innerboot construction with soft, warm, and comfortable PlushLiner (faux fur) or
Microfleece linings, (2) Tapered innerboot geometry to accommodate lower volume foot shapes and narrower achilles tendons. (3) Special Women’s Only Cuff
that is 1.5 cm lower than the comparable men’s version and features a cuff volume expansion adjustment to easily and comfortably accommodate a wide variety
of womens lower leg sizes and shapes.
5. TRUFIT Custom Fit Systems
Axion 11/ 9/ 7 and Raya 9/ 7 models feature TRUFIT Custom Fit Innerboots. TRUFIT is the industry’s most widely imitated ski boot custom fit system. TRUFIT
innerboots are engineered to fit the skier correctly and comfortably right out of the box. Or, the innerboots may be custom heat formed with a quick and easy
heat molding procedure performed in the ski shop.
AXION 11
Men’s Models
Construction
AXION 9
FLEX
Cabrio Design, Bi-Injected D-62 P.E.
Transparent Shell, P.U. Cuff, Low Cuff Hinge, Symmetric
Flex Tongue, Dynalink DC Rearfoot Retention
System
FR (Cable), F-100 ALU Buckles - 4 Micro
FLEX
FLEX
FLEX TranspaCabrio Design, Bi-Injected D-59 P.U./P.E.
Low
Cabrio Design, Bi-Injected PTL Shell/Cuff,
Low Cabrio Design, Bi-Injected PTL Shell/Cuff,
rent Shell, P.U. Cuff, Low Cuff Hinge, Symmetric
Cuff Hinge, Dynalink Heel Retention System,
Cuff
Hinge,
Dynalink
Heel
Retention
System,
Flex Tongue, Dynalink DC Rearfoot Retention
F-65 POLYCARBONATE Buckles - 4 Micro
F-101
ALU Buckles - 4 Micro
System
TP
TP
TP (Cable), F-101 ALU Buckles - 4 Micro
TRUFIT Comp (HD) Custom Fit FLEX
Liner
Adjustments
103
TRUFIT Performer (MD) CustomFLEX
Fit Liner
TRUFIT Sport (MD) Custom Fit Liner
FLEX
Supercomfort Liner
Canting
HP
A.S.P.
Canting
Ramp
Angle Inclinator
HP
A.S.P. Adjustable Spoiler Profile
A.S.P. Adjustable Spoiler Profile
FLEX
millimeter
100-110
HP
103
millimeter
90-100
AR
Women’s Models
Adjustments
Target skier
Last
Flex Index
SC
80-90
AR
FLEX
FLEX
Dynalink Rearfoot Retention System, F-101 ALU
Buckles - 4 Micro (3 Micro - USA), Low Profile
TP
Lady
Cuff Geometry
2 Position Flex Control + Walk/ Ski
Cuff Volume Expansion Canting
HP
2 Position Flex Control + Walk/ Ski
CuffHP
Volume Expansion Canting
FLEX Liner
TRUFIT Sport (MD) Lady Fit Custom
FLEX
75-95
AR
21
AR
103
millimeter
FLEX
Dynalink Rearfoot Retention System, F-65
Polycarbonate Buckles - 3 Micro, Low Profile Lady
CuffTP
Geometry
Supercomfort Lady Fit Liner
SC
FLEX
2 Position Flex Control +Walk/ Ski
Cuff
Volume Expansion
HP
FLEX
65-85
103
millimeter
FLEX
65-85
AR
FLEX
page
SC
FLEX
SC
LS:
22.0 - 27.5
White/ Gold Transp.
FR
Black/ White
FLEX
FLEX
75-85
FLEX
Cabrio Design, Bi-Injected D-59 P.E.FLEX
Transparent
Shell, P.U. Cuff, Dynalink Rearfoot Retention
System, F-101 ALU Buckles - 4 Micro (3 Micro USA),
TPLow Profile Lady Cuff Geometry
TRUFIT Performer (MD) Lady Fit Custom
Liner
FLEX
FLEX
AR
RAYA 5
FLEX
SC
LS:
23.0 - 27.5
White/
Oyster
FR
White/ Storm Blue tr.
LS: 23.0 - 27.5
FR
Transparent/
White
103
millimeter
103
millimeter
FLEX
RAYA 7
SC
FLEX
FLEX
HP
FLEX
millimeter
FLEX
RAYA 9
AR
103
FLEX
FLEX
Fit System
FLEX
MS: 25.0 - 30.5
Steel Grey/ Black
FR
White/ Black
MS: 25.0 - 30.5
FR Red Transp.
Black/
Canting
TP
A.S.P.
Construction
AXION 5
FLEX
MS: 25.0 - 30.5
Black/ White
FR
Steel Grey/ Black
MS: 25.0 - 30.5
Red Transp./ Transp.
Fit System
Target skier
Last
Flex Index
AXION 7
FLEX
SC
4
X-Module Cuff
Volume Expansion
Insert
1
Easy Entry
Tongue
Pull Strap
Low Contour Profile
(on Aspire models)
1
6
Walk/ Ski
Mechanism
Macro
Adjustable Rack
Positioning
2
2
7
Bi-Injected
Contruction
5
3
1
Ramp Angle
Inclinator
X-Module Cuff Volume
Expansion
Men’s
All Aerro and Aspire models feature a unique two piece
boot cuff construction that can accommodate a wide
variety of leg calf volumes or tibia lengths by removing
the insert module. Removing the X-MODULE expands
the boot top opening circumference by approximately 5
cm, and lowers the overall boot height by approximately
2 cm. The X-MODULE Insert should be removed ONLY
if more cuff volume is required for fit or comfort, or if a
lower boot cuff is desired for better performance or fit.
+
Aspire 80 for Women
4
Lady’s
5
Low Contour Profile
(Aspire for Women)
Specifically designed innerboot rear cuff profile
geometry for Aspire Women’s boot models. LCP
model innerboots also features: narrower last shape,
soft “Faur Fur” or Microfleece cuff lining and extra
cushioning.
Bi injected Construction
Two different density plastics fused into one structure.
Hard for control & support. Soft for fit and comfort.
Hi-tech, bi-injected construction provides the optimum
balance of support and control with flexible, ergonomic,
boot opening panels for easy-on/easy-off convenience.
2
WALK/ SKI Mechanism
6
Easy Entry Tongue Pull Strap
3
7
Macroadjustable Rack
Repositioning
-
Lift the Walk/Ski mechanism lever (WALK) to disengage
the cuff lock function. This permits the boot cuff to hinge
backwards for ease of entry, exit, standing, and walking.
Be sure to set boot to SKI position before skiing (lever
points down). DO NOT SKI WITH BOOTS IN WALK
MODE.
Raising or lowering the ramp angle inclinator (heel lift) can
improve heel and ankle comfort for some skiers with boot
fit problems. It may be necessary to experiment with this
adjustment to find the proper position for optimum balance
and control. To adjust: Use the 4mm Hex Tool to turn
the adjustment screw on the lateral side of the bootsole.
CLOCKWISE to raise, COUNTERCLOCKWISE to lower.
22
page
High strength nylon web pull strap is integrated into the
rim of the innerboot tongue to help pull the boots on
easily. WARNING: DO NOT CARRY ski boots by the
Easy Entry Tongue Pull Strap.
Three interchangeable rack slots enable buckle racks to
be easily repositioned to accommodate varying leg shapes
and circumferences. There is a 70 mm range of adjstment.
Use 3mm Hex Tool, to remove rack locking screw.
Aerro & Aspire Series Sales and Technical Data
Aerro and Aspire Series skier profile
Recreational and sport skiers looking for performance and control with a relaxed attitude. Skiers seeking a traditional design ski boot that is easy to put on and
take off, provides all day comfort and warmth, and features functional, easy to use adjustments.
What are the 5 key features of Aerro and Aspire boots?
1. Bi-Injected Construction - Easy Entry Overlap Shellfit
Aerro and Aspire models 80, 70, 60 & 50 integrate state of the art, bi-injection technology that fuses two different density materials into a single structure. A
resilient, soft durometer plastic surrounds the foot. The flexible material permits the lower shell to open very wide permitting very easy boot entry, exit, and boot
cloure The flexible and elastic wrapping properties of the softer plastic material provide uniform foot closure for a precise and comfortable fit. A harder durometer
plastic material is injected over the softer material in the critical support zones providing power, rigidity, and support for maximum performance and control. The
result: a perfect blend of precise fitting power, comfort. Performance personalization and handling convenience is further enhanced by the ergonomic 2 Position
Flex Mechanism with Walk/Ski function.
2. X-Module Cuff Expansion
Aerro and Aspire cuffs are modularly constructed in 2 pieces to adapt to a wide range of lower leg sizes, shapes, and lengths. The X-MODULE (plastic cuff height
extension piece) insert, which is attached along the boot cuff perimeter, may be removed to expand the boot top opening circumference. When removed, opening
circumference is approximately 5 cm larger (wider), and boot height is approximately 2 cm lower. The X-MODULE Insert should be removed ONLY if more cuff
volume is required for fit or comfort, or if a lower boot cuff is desired for better performance or fit.
3. Aspire: Lady’s only fit and function
Aspire models for women are specifically engineered to accommodate womens unique leg and foot anatomies. All Aspire models feature: Low Contour Profile
(LCP) innerboot and shell cuff geometries which lower rear boot height to comfortably accommodate lower and/or wider leg shapes, softer flexing boot cuffs,
narrower innerboot last shapes, X-Module (see above) Cuff Volume Expansion, Microfleece or PlushLiner Faux Fur (on select models) lining textiles for warmth
and comfort, and microadjustable ramp angle inclinator mechanisms for more precise rearfoot fit and adjusting fore/aft balance for better skiing performance.
4. 105 mm Comfort Last - Fits Medium - Wide Volume Feet
Aerro and Aspire models feature Dalbello’s 105 mm “Relaxed Fit” comfort last shape. Targeted for comfort and convenience, the fit is medium to wide, and was
developed to comfortably accommodate feet with average to above average pronation.
5. TRUFIT Custom Fit System
Select Aerro and Aspire models feature TRUFIT Custom Fit Innerboots. TRUFIT innerboots incorporate anatomically heat moldable ULTEVA foam constructions.
TRUFIT innerboots are designed to fit right out of the box , or, they may be optionally custom heat molded. (see TRUFIT Fit System Procedure for more information
- Page 10).
FLEX
FLEX
Men’s Models
FR
FR
AERRO 80
AERRO 70
FLEX
MS: 25.0 - 31.5
Black/ Red Transp.
FR
AERRO 60
FLEX
AERRO 50
FLEX
MS: 25.0 - 31.5
Steel/ Black Transp.
TP
Black/
white
MS: 25.0 - 31.5
Silver/ Black
TP White
Black/
FR
FLEX
TP
FLEX
FLEX
Construction
Classic 2 Piece Overlap Design, Bi-Injected
PTL Shell, P.E. Transparent Cuff, Easy
Entry, F-101 ALU Buckles - 4 Micro
Classic 2 Piece Overlap Design, Bi-Injected Classic 2 Piece Overlap Design, Bi-Injected
PTL Shell/Cuff, Easy Entry, F-101 ALU
PTL Shell/Cuff, Easy Entry, F-65 PolycarboHP
Buckles
nate
Buckles - 2 Micro/2 Macro
HP - 4 Micro
Fit System
TRUFIT Performer (MD) CustomFLEX
Fit Liner
TRUFIT Sport (MD) Custom Fit Liner
FLEX
Supercomfort Liner
Adjustments
Walk/Ski Mechanism
X-Module Cuff Volume Expansion
HP
Walk/Ski Mechanism
X-Module
AR
Walk/Ski Mechanism
X-Module
AR Cuff Volume Expansion
FLEX
Target skier
Last
Flex Index
TP
105
millimeter
80
AR
FLEX
SC
70
FR
FLEX
ASPIRE 80
105
millimeter
FLEX
ASPIRE 60
FLEX
LS:SC
23.0 - 27.5
Black/ Gold
LS: 23.0 - 27.5
Silver Transp./ Silver
TP Transp./ black
Black
Construction
Classic 2 Piece Overlap Design,FLEX
Bi-Injected
PTL Shell, P.E. Transparent Cuff, Easy
Entry, F-101 ALU Buckles - 4 Micro
PTL Shell/Cuff, Easy Entry, F-101 ALU
Buckles
HP - 4 Micro
Fit System
FLEX Liner
TRUFIT Performer (MD) Lady Fit Custom
Liner TRUFIT Sport (MD) Lady Fit Custom
FLEX
Women’s Models
Adjustments
Target skier
Last
Flex Index
FR
TP
105
millimeter
FLEX
75
AR
FLEX
60
23
FLEX
FLEX
SC
50
FR
ASPIRE 50
FLEX
FLEX
LS: 23.0 - 27.5
White/ Neutral Transp.
TP Gold
Black/
FLEX
FLEX
PTL Shell/Cuff, Easy Entry, F-65 Polycarbonate
Buckles - 2 Micro/2Macro
HP
FLEX
105
millimeter
SC
FLEX
Macro Adjustable Buckle Racks (Top 2)
Walk/Ski
Mechanism
AR
65
SC
page
SC
FLEX
105
millimeter
PTL Shell/Cuff, Easy Entry, F-65 Polycarbonate
Buckles - 2 Micro/2Macro
HP
FLEX
105
millimeter
FLEX
AR
FLEX
LS: 23.0 - 27.5
Black/ Neutral Transp.
TP ice/ Oyster
White
Walk/Ski Mechanism
X-Module
AR
Walk/Ski Mechanism
HP
SC
FLEX
Macro Adjustable Buckle Racks (Top 2)
FR
ASPIRE 70
FLEX
105
millimeter
FLEX
PTL Shell/Cuff, Easy Entry, F-65 PolycarboHP
nate
Buckles - 2 Micro/2 Macro
Supercomfort Liner
FLEX
FLEX
FLEX
MS: 25.0 - 31.5
Black/Silver
AR
105
millimeter
FLEX
55
SC
FLEX
45
Low Contour Profile Cuff
Geometry accomodated
shorter leg
TRUFIT Custom
Fit Innerboots
Classic High
Performance Ovelap
Design (4 Buckle)
High tech Bi-Injected
Polyurethane/
Polyether Construction
Convenient Soft
Entry System
Forward Lean
Control
High leverage,
Ergonomic
Microadjustable
Alumium Buckles
P 6 Comp
P4 SPORT/ MENACE/ ELLE
KRYPTON JAKK
P6 COMP
Models
JR: 22.0 - 27.5
Cement/ Black
JR: 19.0 - 26.5
Black/Lime green transp.
JR: 19.0 - 26.5
Black/ Red, Cement/ Black
White/ Storm transp.
Construction
Cabrio Design, D-59 P.U. Shell, Kinetic Response Tongue (P.A.
- C), Dynalink DC Rearfoot Retention System (Cable), F-65
Polycarbonate Buckles - 3 Micro, Inverted Forefoot Buckle
Classic Overlap, Bi-Injected P.U D-59/P.E. Transparent
Shell/Cuff, F-4 ALU Buckles - 4 Micro
Classic Overlap, Bi-Injected PTL Shell/Cuff, F-5 Polycarbonate Buckles - 4 Macro
Fit System
TRUFIT Sport MD Custom Fit Liner
TRUFIT Sport MD Custom
Fit LinerFLEX
FLEX
Adjustments
Forward Lean Control Flex Control
Twin Axis Canting Landing Gear Footboard
(anti-Shock)
FR
“Ride” Tongue - Medium “C”Flex
98
millimeter
Target skier
Flex Index
70-100
TP
HP
FLEX
Fit System
Cabrio Design - 3 Piece, PTL, Easy Entry, Dynalink AR
HP
Rearfoot Retention, GTR Polycarbonate Buckles - Macro,
FLEX
3 Buckle
Closure
TP
Supercomfort Liner FLEX
FLEX
AR
Adjustments FR
Ratchet Top Cuff Closure Buckle (Not in USA)
HP
FLEX
Target skier
Flex Index
SC
TP
30
AR
FLEX
FLEX
Sizes:
19.0 21.5
50
TP
FRJR: 19.0 - 22.5
CX 2
CX 1 JR: 14.5 - 18.5
SC
FR
FLEX
FLEX
FLEX
FLEX
SC
HP
AR
FR
CX 2
25
SC
TP
SC
HP
HP
FLEX
FLEX
FLEX
FLEX
SC
AR
FLEX
FLEX
FLEX
20
SC
FLEX
HP
Sizes:
22.0 - 26.5
40
FLEX
FLEX
HP
Super Comfort RE Jr.FLEX
TP
FLEX
FLEX
AREntry Design, PTL, 1 Ratchet Buckle
EasySC
Entry Rear
Closure
FLEX
CX 1
20
FLEX
HP
FR
FLEX
FLEX
30
TP
JR: AR
14.5 - 25.5
Silver/TP
Steel Grey
SC
Ratchet Top Cuff Closure Buckle
FLEX
FLEX
FLEX
AR
page
HP
SX 1.7
FLEX
Sizes:
19.0 21.5
FLEX
FLEX
SC
24
FLEX
HP
FLEX
FR
FR
FLEX
FLEX
FLEX
60TP
FLEX
TP
Sizes:
22.0 - 26.5
Cabrio
DesignAR
- 3 Piece, PTL, Easy Entry,
AR
GTR Polycarbonate Buckles - Macro,
FLEX
FLEX
CX 2: 2HP
Buckle Closure
CX 1: 1 FLEX
Buckle Closure
Super Comfort Liner FLEX
FLEX
FLEX
FLEX
TP
FLEX
CX 2HP
& 1: HP
Black/ white
CX 2 TP
Gaia: White/ Berry Transp.
CX 1 Gaia: White/ Pink
FLEX
FLEX
FR
FLEX
FLEX
Construction
TP
FLEX
Super Comfort Liner
FLEX
FR
FLEX
FLEX
JR: 23.0
TP - 26.5
CX 3: Black/ Silver
FR
CX 3 Gaia: White/ Berry transp.
Models
FR
FLEX
FLEX
CX 3
FR
FLEX
FR
FLEX
RENTAL
Waterproof Innerboot
Construction
Extra High Volume Cuff Design
comfortably accomodates hard to
fit leg shapes.
Bar Code Ready
Construction
Easy Entry
Tongue Pull Strap
Walk/Ski
Mechanism
with 2 Position
Forward
Lean Control
Extra Long (140 mm)
Ratchet Strap
Buckle Closure
Durable Polycarbonate
Buckles with High
Hinging Covers
Mondo Sizing
22 - 33 (U.S. Size 15)
Heavy Duty
Replacement Heel & Toe
Inserts
MX SUPER RENTAL
P COMP
MX SUPER
DX SUPER
Construction
Classic Design 2 Piece Overlap, D-59 Polyurethane Shell/
Cuff, Easy Entry, High Volume Cuff Geometry, Axxo P.C./
Steel Buckles, 140 mm Ratchet Buckles (2), Bar Code
Ready
Classic Design 2 Piece Overlap, D-59 Polyurethane Shell/
PTL Cuff, Easy Entry, High Volume Cuff Geometry, Axxo
P.C./Steel Buckles, 140 mm Ratchet Buckles (2), Bar
Code Ready
Classic Overlap, Bi-Injected D-59 P.U./P.E. Shell/Cuff,
F-65 Polycarbonate Buckles - 4 Micro, Quick Macro Cuff
Buckle Extension (2)
Fit System
Super Comfort LIner Waterproof, Anti-Bacterial
Adjustments
Walk/Ski Mechanism
2 Position Forward Lean Control
Models
MS: 25.0 - 33.0
LS: 22.0 - 27.5
MS: Steel Grey, LS: Silver
CXR 3
Models
Construction
Fit System
Adjustments
MS: 25.0 - 32.0
LS: 22.5 - 27.5
MS: Black, LS: Black
CXR 2/ CXR 1
JR: 23.0 - 26.5
Silver/Red
Orange
JR: 19.0 - 22.5 (CXR 2)
JR: 14.5 - 18.5 (CXR 1)
Silver/Red
Orange
Cabrio Design - 3 Piece, D-59 Polyurethane, Easy Entry,
Dynalink Rearfoot Retention, GTR Polycarbonate Buckles Macro, 3 Buckle Closure - Ratchet Top Buckle
Cabrio Design - 3 Piece, PTL, Easy Entry, GTR Polycarbonate Buckles - Macro, 2 Buckle Closure, Ratchet Top
Buckle
CXR 2 - 2 Buckle Closure
CXR 1 - 1 Buckle Closure
25
page
MS: 24.0 - 29.5
MS: Silver/ Orange Transp.
RX 1.8
JR: 14.5 - 25.5
Black
Easy Entry Rear Entry Design, D-59 Polyurethane,
1 Ratchet Buckle Closure
The Vantage Rental boot has been uniquely engineered for outstanding comfort, ease of handling, warmth, and durability. Featuring Dalbello’s
new 4 FACTOR SYSTEM TECHNOLOGY. The 4 Factor System is a unique boot sole sizing system that has been developed to provide a new
level of speed and efficiency in rental equipment management and handling.
Waterproof Innerboot
Construction
Extra High Volume Cuff Design
comfortably accomodates hard
to fit leg shapes.
integrated
Bar Code
Easy Entry
Tongue Pull Strap
Ergonomic
Walk/Ski
Mechanism
Extra Long (140 mm)
Ratchet Strap
Buckle Closure
4 Factor System
Color Coded Buckle
Racks
Low Cuff
Hinge for
Easy Entry &
Easy Flex
Easy Open/ Close
Extended length
Buckle Levers
(Cuff Buckles)
Durable Polycarbonate
Buckles
Mondo Sizing
23 - 34.5 (U.S. Size 16)
Heavy Duty
Replacement Heel
& Toe Inserts
4 Factor System
Only 4 Boot Sole Lenght
Vantage Rental
New - 4 Factor System
Vantage/ 4 Factor is available in 12
different shell sizes, but, uses ONLY
FOUR BOOTSOLE LENGTHS for the
entire series. Fewer boot sole lengths
mean faster adjustments and fewer
mistakes.
High Visibility Color
Coded Sizing
4 Factor System boot sole lengths are
easily identifiable using a color coding
system on the buckles, rear cuff, and
bootsole: Orange, Purple, Blue, and
Green.Color coded system coordinates with Elan and Tryolia SymPro
rental binding systems.
Easy Handling
Mid Entry Design
Extra wide opening, mid-entry
construction goes on fast and is easy
to close. Extra long, 140 mm ratchet
buckles on the cuff comfortably
accommodate legs of all sizes and
shapes. Extra long buckle levers on
cuff make buckle closure and opening
easy.
26
page
Comfort Fit Innerboots
The best fit and warmest innerboots
for rental featuring fast drying
WATERPROOF constructions and
anti-bacterial SANITIZED® lining
treatments.
RENTAL
23.0
23.5
290mm G 290mm G
26.0
320mm O
26.5
320mm O
24.0
24.5
290mm G 290mm G
27.0
320mm O
27.5
320mm O
25.0
25.5
290mm G 290mm G
28.0
320mm O
28.5
320mm O
ORANGE
PURPLE
BLUE
GREEN
29.0
350mm V
29.5
350mm V
32.5
370mm 1
30.0
350mm V
30.5
350mm V
33.5
370mm 1
31.0
350mm V
31.5
350mm V
34.5
370mm 1
Like conventional rental ski boots, the Vantage is manufactured in 21 different sizes. Unique, however, is
the 4 Factor System Technology. ONLY 4 BOOTSOLE LENGHTS are used for the entire series of boots.
The foot is centered on all bootsoles. And, although there are only 4 bootsole lenght intervals for all sizes,
the boots are perfectly balanced, both visually and functionally. Rental business is all about providing fast
and efficient service to your “guests” who are waiting to go skiing. The advantage to using Vantage/ 4 Factor
System ski boots in rental operations is that fewer bootsole lenghts mean fewer binding adjustments need
to be made. The result: rental shops work faster and more efficiency with fewer adjustment errors. The
average rental shop can service more customers in less time with fewer employees.
Vantage boots are available in Steel Grey, Black/ Red and Silver. 4 Factor Bootsole lenghts are easily identifiable using a color coding i.d. system on the buckles, cuff graphics and boot soles: Orange, Purple, Blue
and Green. Boot sizes and sole lenghts (mm)are clearly marked with LARGE, color coded graphics located
on the cuff rear. In addition, Vantage boots feature binding adjustment letter graphics that coordinate with
the adjustment coding system used on Elan® ESP and Tyrolia® Sympro rental system bindings.
High Visibility
Size/Binding
Code Graphics
PUTTING VANTAGE BOOTS ON
1
2
OPEN
Open all buckles.
4
3
STEP-IN
BUCKLE-UP
Stand & step into
boot.
FINAL CHECK
Close buckles with firm yet
comfortable tension.
Before skiing, make sure
rear lever is closed (down).
VANTAGE/ 4 FACTOR BOOT SIZING
Vantage 4 Factor Boots are available in men’s and women’s sizes. The table below illustrates a hypothetical rental shop size curve for 100 pairs of
boots ordered in three different size curvers: men’s, women’s and unisex. These tables are for illustration purposes only. Specific rental shop boot
sizing needs may be different, and may vary by geographic region.
MEN’S SIZING CURVE
ORANGE
PURPLE
250/255
8
BLUE
GREEN
260/265
270/275
280/285
290/295
300/305
310/315
15
19
21
16
8
4
WOMEN’S SIZING CURVE
ORANGE
325
335
345
3
4
4
240/245
250/255
260/265
270/275
TOTAL
13
30
26
24
7
100
UNISEX SIZING CURVE
ORANGE
PURPLE
BLUE
GREEN
230/235 240/245 250/255 260/265 270/275 280/285 290/295 300/305 310/315
10
13
100
PURPLE
230/235
7
TOTAL
17
19
12
6
4
27
page
4
325
335
345
TOTAL
3
3
2
100
2008/2009 DALBELLO TECH
KR STORM & ID
80-120
75-105
D65
D62
8
8
8
D62
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
24-29.5
N/A
N/A
101
120
D65
8
8
8
S5RGE & ID
24-29.5
N/A
N/A
101
110
D62
8
8
8
D62
8
8
8
8
8
8
D59
D59
8
8
8
8
8
8
D62
D62
8
8
8
8
8
8
8
8
D59
D59
8
8
8
8
8
8
8
8
PROTON 10
ELECTRA 10
24-29.5
22-27.5
N/A
101
100
95
PROTON 8
ELECTRA 8
24-29.5
22-27.5
N/A
101
90
85
25-30.5
N/A
N/A
103
100-110
8
8
8
8
AXION 9
RAYA 9
25-30.5
23-27.5
N/A
103
90-100
75-95
AXION 7
RAYA 7
25-30.5
23-27.5
N/A
103
80-90
65-85
8
8
8
8
8
8
8
8
AXION 5
RAYA 5
25-30.5
22-27.5
N/A
103
75-85
65-85
8
8
8
8
8
8
AERRO 80
ASPIRE 80
25-31.5
23-27.5
N/A
105
80
75
AERRO 70
ASPIRE 70
25-31.5
23-27.5
N/A
105
70
65
AERRO 60
ASPIRE 60
25-31.5
23-27.5
N/A
105
60
55
AERRO 50
ASPIRE 50
25-31.5
23-27.5
N/A
105
50
45
KR JAKK
N/A
N/A
22-27.5
98
70-100
D59
P 6 COMP
N/A
N/A
19-26.5
50/60
D59
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
P4 / MENACE /
ELLE
N/A
N/A
19-26.5
30/40
8
8
CX 3
CX 3 GAIA
N/A
N/A
23-26.5
40
CX 2
CX 2 GAIA
N/A
N/A
19-22.5
30
CX 1
CX 1 GAIA
N/A
N/A
14.5-18.5
20
N/A
N/A
14.5-25.5
VANTAGE
23-34.5
23-27.5
N/A
D59
MX SUPER
25-33
22-27.5
N/A
D59
DX SUPER
25-32
22-27.5
N/A
D59
RX 3.8
25-31
22-27
N/A
D59
CXR 3
N/A
N/A
23-26.5
D59
8
CXR 2
N/A
N/A
19.5-22.5
D59
CXR 1
N/A
N/A
14.5-18.5
D59
RX 1.8
N/A
N/A
14.5-25.5
D59
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
SX 1.7
8
8
8
D52
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
28
8
8
8
8
page
HEAVY DUTY REPLACEMENT HEELS
8
MODULAR HEEL CUP INSERT
8
EXTRA WIDE POWERSTRAP
8
FLEX ADJUSTED FOR SMALLER SKIERS
8
A.S.P. ADJUSTABLE SPOILER PROFILE
8
ANTI SHOCK HEEL INSERT
8
"LANDING GEAR" SHOCK ABSORBING FOOTBOARD
8
"POWERSOLE" HIGH PERFORMANCE FOOTBOARD
8
X-MODULE CUFF VOLUME EXPANSION INSERT
8
HIGH VOLUME CUFF GEOMETRY
8
LOW CUFF HINGE POINT(2)
8
X-MODULE CUFF VOLUME EXPANSION INSERT
ACTIFLEXOR - ENERGY BOOSTER
CUFF LOCK SYSTEM
8
QUICK CHANGE MODULAR ASSEMBLY - 100% DISASSEMBLABLE
8
DYNALINK HEEL RETENTION SYSTEM
8
D59
CARBON REINFORCED SPOILER
8
SYMMETRIC FLEX POWER TONGUE (4)
8
KINETIC RESPONSE TONGUE "D" - SOFT FLEX" D-52 P.A.
100-140
90-120
KINETIC RESPONSE TONGUE "C" - MEDIUM FLEX" D-59 P.A.
98
98
8
KINETIC RESPONSE TONGUE "B" - STIFF FLEX" D-65 P.A.
N/A
N/A
SOFT PANEL EASY ENTRY SYSTEM
22-26.5
22-26.5
REAR ENTRY DESIGN
24-29.5
24-29.5
HYBRID DESIGN - CENTRAL ENTRY OVERLAP SHELLFIT
VARIO
CLASSIC DESIGN - TWO PIECE SHELLFIT
103
CABRIO DESIGN - THREE PIECE OVERLAP SHELLFIT
N/A
CO-MOLDED, BI-INJECTION CONSTRUCTION
N/A
POLYTEC LITE
25-30.5
70-100
H.E.M. POLYETHER TRANSPARENT
80-110
8
8
98
POLYURETHANE
N/A
FLEX INDEX (WOMEN'S)(1)
22-26.5
D62
8
AXION - RAYA
SERIES
24-29.5
D62
8
AERRO - ASPIRE
SERIES
VARIO
8
JUNIOR
SERIES
98
PROTON 12 & ID
AXION 11
RENTAL
SERIES
FLEX INDEX (MEN'S)(1)
KR CROSS & ID
LAST WIDTH (MM)
KR KRYZMA & ID
N/A
8
PROTON - ELECTRA
SERIES
KR PRO & ID
N/A
8
KRYPTON
SERIES
RAVE
JUNIOR SIZES
KR LOTUS
WOMEN'S SIZES
RAMPAGE
24-29.5
8
FREESKI
IL MORO & ID
MEN'S SIZES/UNISEX SIZES
- %.35.)3%8* 5.)/2
4%#(./, /'9&%! 452%3
#/.3425#4)/.
-! 4%2)! ,
HYPERBAND WIDE PROFILE CUFF CLOSURE
$%4! ), 3
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
MACRO BUCKLE EXTENSION FEATURE
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
page
29
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
TAPERED REARFOOT FIT
ADDITIONAL CUSHIONING
ADDITIONAL INSULATION
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
MODULAR HEEL CUP INSERT
MICROFLEECE INNERBOOT TEXTILES
PLUSHLINER "FAUX FUR" INNERBOOT TEXTILES
CUFF VOLUME CIRCUMFERENCE EXPANSION
8
LOW ANATOMIC PROFILE SHELL/CUFF SPOILER
8
SPECIAL WOMEN'S LOW PROFILE GEOMETRY CUFF
8
EASY HANDLING 3 BUCKLE CLOSURE DESIGN
LIGHTWEIGHT POLYMER CONSTRUCTION
REDUCED VOLUME FITTING LASTS
8
SOFTER DUROMETER CUFF PLASTICS
FLEX ADJUSTED FOR WOMEN SKIERS
WATERPROOF LINING
HEAT SYSTEM READY DESIGN (7)
8
SANATIZED® ANTI-BACTERIAL LINING
HIGH DENSITY / REDUCED VOLUME FIT
SUPER COMFORT FIT SYSTEM - TRADITIONAL FIT
TRUFIT "SPORT" CUSTOM FIT INNERBOOT - MEDIUM DENSITY
TRUFIT "PERFORMER" CUSTOM FIT INNERBOOT - MEDIUM DENSITY
TRUFIT "TEAM PRO" CUSTOM FIT INNERBOOT - HIGH DENSITY
TRUFIT "COMP" CUSTOM FIT INNERBOOT - HIGH DENSITY
ID THERMO CUSTOM FIT INNERBOOT - MEDIUM DENSITY - LADY FIT
ID THERMO CUSTOM FIT INNERBOOT - MEDIUM DENSITY
ID THERMO CUSTOM FIT INNERBOOT - HIGH DENSITY
TOP CUFF RATCHET BUCKLE CLOSURE
140 MM. EXTRA LONG RATCHET STRAP BUCKLES
DC CABLE CLOSURE SYSTEM - MACRO ADJUSTABLE
(5)
MACRO ADJUSTABLE BUCKLES
MICRO ADJUSTABLE BUCKLES
JUNIOR PROPORTIONED BUCKLE LEVERS
EASY OPEN/EASY CLOSE BUCKLE LEVERS
INVERTED FOREFOOT BUCKLES
POLYCARBONATE BUCKLES
PC/ALU METAL MIX BUCKLES
F-100 ALUMINUM BUCKLES / F 5 JUNIOR ALU (LOW PROFILE)
CANTING (SHAFT ALIGNMENT)
8
8
8
8
(1) FLEX INDEX: Adult flex index numbers indicate range on models with adjustable flex. Junior P6/P4/Menace/Elle: Sizes 19 - 21.5 = lower flex index number, Sizes 22 - 26.5 = higher flex index number
8
8
8
DALBELLO
reserves
the right totochange
specifications
without
notice
in order to improve the product.
(7) HEAT SYSTEM READY DESIGN: TRUFIT Innerboots
need
no modification
install aftermarket
Heat
System
Insoles.
8
(6) FIT FOR WOMEN TECHNOLOGY: Softer Plastics, Easier to Flex, Reduced Height Cuffs & Innerboots (select models), Unique Women's Fitting Lasts
8
(5) DC CABLE CLOSURE: Midfoot cable closure adjustment featured on all Krypton (MS/LS/JR), Axion 11, Axion 9
8
&)43934%-
(4) SYMMETRIC FLEX POWER TONGUE: featured on Axion 11, Axion 9
F-101 ALUMINUM BUCKLES
8
TWIN AXIS CANTING (SHAFT ALIGNMENT)
" 5#+ , %3#, /352%3934%-
(3) FLEX CONTROL + WALK/SKI MECHANISM: FEATURED ON WOMEN'S RAYA SERIES. FLEX CONTROL ONLY ON MEN'S AXION SERIES
ALU SLAP RATCHET CUFF CLOSURE BUCKLE
8
RAMP ANGLE INCLINATOR (HEEL LIFT) MICROADJUSTABLE
-%#(!.)3-3
(2) LOW CUFF HINGE : Featured on all KRYPTON models, AXION models, and VANTAGE rental models
FLEX CONTROL (3)
8
WALK/SKI MECHANISM (3)
FORWARD LEAN CONTROL
NICAL SPECIFICATION
&)4&/27/-%.4%#(./, /'9 FLEX INDEX TABLE
Over the past several years, our industry has attempted to standardize the system of flex indexing ski boots. Currently, however, no uniform
system of flex measurement protocols has been adopted as “the standard” for all the different ski boot manufacturers. Flex index numbers within
a specific manufacturer’s collection are relative to other boots in that manufacturer’s line, but have similar, but no precise direct comparison value
to boots made by other manufacturers, even when they appear to use the same scale. The commonly used system of Flex Index values has
recently become more indicative of ski boot performance and price positioning combined with the dynamic characteristics of boot flex.
SOFT
MEN’S
WOMEN’S
HARD
Freestyle
SOFT
HARD
70
100
80
75
120
105
Freestyle
Il Moro / ID
Rampage
Rave
Pro / Pro ID
Cross / Cross ID Proton
Krypton
Lotus (KR)
Krypton
Kryzma / ID
Storm / ID
120
110
100
90
E 10
E8
Axion
Aerro
75
65
65
Raya 9
Raya 7
Raya 5
95
85
85
75
65
55
45
Aspire 80
Aspire 70
Aspire 60
Aspire 50
HARD
70
100
50
60
30
40
30
40
30
40
30
25
20
20
USING FLEX INDEX TABLE
Aspire
80
70
60
50
Aerro 80
Aerro 70
Aerro 60
Aerro 50
95
85
Raya
SOFT
Jakk (KR)
19.0-21.5
p6
22.0-26.5
p6
19.0-21.5
p4
22.0-26.5
p4
Menace 19.0-21.5
Menace 22.0-26.5
19.0-21.5
Elle
Elle
22.0-26.5
CX 3
CX 2
CX 1
SX 1.7
Electra
P12 Carbon / ID
Surge / ID
P 10
P8
Axion 11
Axion 9
Axion 7
Axion 5
JUNIOR
Recreational
< 60
Intermediate
60 - 75
Advanced
75 - 100
Expert/Pro
100 +
*
* Adult Skiers
MONDO
EURO
U.S. KIDS
14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5
24
25
26
1
6
62
7
7
27
1
2
28
1
8
82
29
9
30
10
11
31
32
1
12
33
13
12 2
1
34
35
2
3
4
36
4
1
2
37
1
52
5
38
39
1
6
62
7
40
1
72
41
1
8
82
ENGLISH
3
32
1
4
4
1
2
5
52
1
6
62
1
7
72
1
8
82
1
9
92
10
10 2
1
11
11 2
1
12
12 2
1
13
13 2
U.S. MEN
4
4 12
5
5
1
2
6
62
1
7
72
1
8
82
1
9
92
1
10
10 12
11
11 2
1
12
12 2
1
13
13 2
1
14
14 2
U.S. WOMEN
42
5
52
6 12
7
72
8
82
9
92
EURO
34
MONDO
22.0
1
35
22.5
1
6
36
23.0
37
23.5
24.0
38
1
39
1
40
41
1
30
1
1
10
42
24.5 25.0 25.5 26.0 26.5 27.0 27.5
page
1
43
44
28.0 28.5
45
46
47
48
29.0 29.5 30.0 30.5 31.0
49
50
31.5 32.0 33.0
page
31
KRYPTON SERIES
23/23.5
BOOTSOLE LENGTH (mm)
BOOT SIZES
JUNIOR SX SERIES/RX 1.8
BOOT SIZES
JUNIOR CX SERIES/RENTAL CXR
BOOT SIZES
P6/ P 4 SPORT/ MENACE/ ELLE
BOOT SIZES
RX 3.8 RENTAL
BOOT SIZES
16/16.5
204
194
16.5/17.5
212
206
224
14.5/16.0
214
18/18.5
270
17/17.5
23.5/24
280
24/24.5
262
268
26/26.5
224
18/18.5
234
234
19/20
241
20/20.5
249
19/19.5
20/20.5
239
290
25.5/26
297
26/26.5
28/28.5
299
25/25.5
297
25/25.5
298
25/25.5
19/19.5
280
24.5/25
286
25/25.5
PURPLE - “O”
320
27/27.5
289
22.5/23
23/23.5
260
25/25.5
24/24.5
287
24/24.5
279
277
23/23.5
23/23.5
267
288
22/22.5
24/24.5
296
286
278
276
266
25/25.5
24/24.5
23/23.5
23/23.5
22/22.5
22/22.5
ORANGE - “G”
290
24/24.5
14.5/15.5
RENTAL MX SUPER/DX SUPER & DX MODELS
COLOR CODE/ BINDING CODE
BOOT SIZES
RENTAL VANTAGE MODELS
BOOT SIZES
AERRO & ASPIRE SERIES (MODELS 90/80/70/60/50)
BOOT SIZES
AXION & RAYA SERIES
BOOT SIZES
PROTON & ELECTRA SERIES
BOOT SIZES
251
20.5/21.5
250
21/21.5
259
21/21.5
302
26.5/27
305
27/27.5
29/29.5
308
26/26.5
307
26/26.5
308
26/26.5
306
26/26.5
265
22/22.5
262
22/22.5
269
22/22.5
310
27.5/28
315
28/28.5
BLUE - “V”
350
30/30.5
318
27/27.5
317
27/27.5
318
27/27.5
316
27/27.5
273
23/23.5
267
23/23.5
279
23/23.5
320
28.5/29
324
29/29.5
31/31.5
328
28/28.5
327
28/28.5
328
28/28.5
326
28/28.5
280
24/24.5
277
24/24.5
289
24/24.5
330
29.5/30
334
30/30.5
32.5
339
29/29.5
337
29/29.5
338
29/29.5
336
29/29.5
289
25/25.5
287
25/25.5
300
25/25.5
340
30.5/31
347
31.0/32.0
GREEN - “1”
370
33.5
349
30/30.5
347
30/30.5
297
26/26.5
310
26/26.5
356
33.0
34.5
359
31/31.5
2008/2009 SKI BOOT SOLE LENGTHS
www.dalbello.it (international)
www.dalbellosports.com (usa)
Calzaturificio Dal Bello s.r.l.
Via Frattalunga 12
31011 Casella D’Asolo (TV) Italy
Tel: +39 0423 55641 Fax: +39 0423 529301
e-mail: [email protected]
page

2008/2009 Sales and Technical Support Manual - Contacts

Transcription

Similar documents

Ski boot central Chris Haworth talks to some of skiing`s key

WZC Sint-Lenaartshof

Deblocking Lenses Has Never Been So Easy!

Performance™ Series EZ Flex™ Media Filter with Cabinet

The Essential Guide to Flexible and Home

Roy Parker - New Mexico Ski Hall of Fame

no additional fuel or currency

1892 - Weinbrenner

breaking the mold

User`s Manual