Tables PL 1/2007 - Bernhardt design
Transcription
Tables PL 1/2007 - Bernhardt design
∞≤√ 2013 Odeon Price Increase Effective March 1, 2013 3% odeon price list january 2013 ∞≤√ odeon base Odeon Base Rectangular Odeon Base Bottom View Square Odeon Base Clear Opening Dimensions The Odeon conference table features bases of bent plywood with quarter cut maple veneer faces available in both rectangular and square shapes. Bases and tops are specified and sold separately. See the specific top size desired for the appropriate number of bases required. One side of each base has a removable access panel for easy entry into the base for wire management. Large openings on both the bottom and top provide the largest possible open area for floor monuments. The Odeon base is designed to work with the Mediatrac rail system. When installed, the Odeon base will straddle the rails and provide clear access for the Mediatrac grommet system if specified. Odeon conference tables meet the multi-attribute sustainable standard for Level 1 certification. For more information visit levelcertified.org. The Odeon conference table is GREENGUARD Certified and certificates are available on Bernhardtdesign.com or GREENGUARD.org. Bernhardt Design also offers FSC chain-of-custody certification for conference tables. For more information on FSC availability and pricing, please contact [email protected]. 25'' Rectangular - 18∂'' x 6∑'' 30'' Rectangular - 23∂'' x 6∑'' 25'' Square - 18∑'' x 21'' 30'' Square - 23∂'' x 26'' Removable Veneer Panel 3Ω'' 28∂'' 1∂'' 25'' - 30'' Side View End View 25'' Rectangular - 10'' 30'' Rectangular - 10'' 25'' Square - 25'' 30'' Square - 30'' description sku w d h weight specifications odeon base ZLU ZLV 25 30 10 10 28∂ 28∂ laminate laminate ZYU ZYV 25 30 10 10 28∂ 28∂ veneer veneer ZLR ZLS 25 30 25 30 28∂ 28∂ laminate laminate ZWR ZWS 25 30 25 30 28∂ 28∂ veneer veneer laminate $ 1847 1959 veneer $2079 2185 rectangular odeon base - 2519 2742 - square specification codes series W conference W 01/13 sku veneer laminate F plain/abstract laminate W woodgrain laminate veneer J cherry E maple C oak 9 walnut Q anigre 2665 2932 - style X none 6 base polished aluminum X 6 - finish see appendix 2 ∞≤√ odeon tops Odeon Tops Top ships with Mediatrac rail system pre-installed Top is available with optional Mediatrac grommets 25'' Base - 12∂'' 30'' Base - 17∂'' Odeon bases straddle the Mediatrac rails when installed Odeon tops are specifically constructed to accommodate the Odeon bases. Tops and bases are specified and sold separately. See the specific top size desired for the appropriate number of bases required. Depending on the width of the top specified, the Mediatrac rail placement will either have 12∂” or 17∂” inside clearance. The recommended base sizes must be specified to ensure a proper alignment and fit. All Odeon tops are pre-installed with the Mediatrac rail system as part of their standard construction and are ready to accept any Mediatrac grommet configuration. Detail view of the Odeon top with the base and the Mediatrac grommet. Laminates - Grade 1 F W Plain/Abstract Laminate Woodgrain Laminate A variety of standard laminate finishes are available with vinyl edge bands specifically formulated to correspond to standard laminates. See finish selections in the appendix for standard laminates and edge bands. Veneer - Grade 2 J Cherry - Flat Cut 9 Walnut - Flat Cut E Maple - Flat Cut C Oak - Rift Cut Odeon conference tables meet the multi-attribute sustainable standard for Level 1 certification. For more information visit levelcertified.org. The Odeon conference table is GREENGUARD Certified and certificates are available on Bernhardtdesign.com or GREENGUARD.org. Veneer - Grade 3 Q Anigre - Quarter Cut Bernhardt Design also offers FSC chain-of-custody certification for conference tables. For more information on FSC availability and pricing, please contact [email protected]. Edge Group B Edge Group A A Block specification codes series Q top Q 01/13 sku F Flat veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre E Stepped R Reverse Bevel edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped base W odeon base N Bevel finish see appendix S Shaped grommet placement W 3 ∞≤√ odeon tops cherry maple oak walnut odeon tables laminate tops sold separately order bases separately see mediatracTM for available grommet locations approved for GSA Contract GS-28F-7040G Level1 Certified GREENGUARDCertified square top arched square top radius square top round top specification codes sku l w ADD AEE 54 60 54 60 (1) 25'' square base BDD BEE 54 60 54 60 (1) 25'' square base CDD CEE 54 60 54 60 (1) 25'' square base DDD DEE 54 60 54 60 (1) 25'' square base series Q top Q 01/13 sku specifications (1) 25'' square base (1) 25'' square base (1) 25'' square base (1) 25'' square base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1262 $ 1325 $ 1814 $ 2123 $ 2105 $ 2413 1262 1468 1325 1541 1854 1975 2169 2311 2150 2291 2466 2627 1262 1468 1325 1541 1854 1975 2169 2311 2150 2291 2466 2627 1262 1468 1325 1541 1873 1994 2191 2332 2173 2312 2491 2651 1468 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 1541 1932 base W odeon base 2260 2241 finish see appendix 2569 grommet placement W 4 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified rectangular top specification codes sku l w EGC 72 48 (2) 25'' rectangular bases EHC 78 48 (2) 25'' rectangular bases EIC 84 48 (2) 25'' rectangular bases EJC EJD 90 90 48 54 (2) 25'' rectangular bases EKC EKD EKE 96 96 96 48 54 60 (2) 25'' rectangular bases ELC ELD ELE 102 102 102 48 54 60 (2) 25'' rectangular bases EMC EMD EME 108 108 108 48 54 60 (2) 25'' rectangular bases ENC END ENE 114 114 114 48 54 60 (2) 25'' rectangular bases EOC EOD EOE 120 120 120 48 54 60 (2) 25'' rectangular bases EQC EQD EQE EQF EQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 01/13 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases; 4 piece tops (3) 30'' rectangular bases; 4 piece tops veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1306 $ 1371 $ 1979 $ 2315 $ 2295 $ 2632 1381 1450 2030 2375 2355 2700 1637 1719 2326 2722 2698 3094 1968 2148 2128 2255 2722 2825 3184 3305 3157 3277 3620 3757 2064 2257 2449 2167 2370 2571 2790 2899 3008 3264 3391 3520 3236 3362 3490 3711 3855 4001 2391 2596 2799 2511 2726 2939 3095 3210 3326 3621 3756 3892 3590 3723 3858 4116 4269 4424 2487 2704 2920 2611 2839 3066 3168 3291 3413 3707 3850 3994 3675 3817 3960 4214 4377 4540 2583 2812 3040 2712 2953 3192 3243 3372 3500 3794 3945 4095 3762 3911 4060 4313 4485 4655 2680 2920 3161 2814 3066 3319 3318 3452 3569 3882 4039 4176 3848 4004 4140 4412 4591 4747 3047 3312 3577 3841 4105 3199 3478 3755 4033 4311 3949 4102 4257 4411 4566 4620 4800 4980 5161 5342 4580 4759 4938 5117 5296 5252 5456 5661 5867 6073 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish see appendix grommet placement W 5 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified rectangular top specification codes sku l w ESD ESE ESF ESG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EUD EUE EUF EUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EWD EWE EWF EWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EYD EYE EYF EYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases E1D E1E E1F E1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E3D E3E E3F E3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E5D E5E E5F E5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E7D E7E E7F E7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases E9D E9E E9F E9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 01/13 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 3529 $ 3705 $ 4281 $ 5009 $ 4966 $ 5694 3745 4057 4575 4889 3932 4260 4804 5133 4428 4609 5168 5348 5181 5392 6047 6258 5137 5346 5995 6204 5890 6129 6874 7113 4192 4529 5071 5408 4401 4755 5325 5678 4807 4999 5600 5792 5624 5848 6552 6776 5576 5799 6496 6719 6393 6648 7448 7703 4408 4770 5336 5696 4629 5008 5602 5981 4954 5159 5842 6048 5796 6036 6835 7076 5747 5984 6777 7015 6589 6861 7770 8043 4625 5009 5695 6080 4856 5260 5980 6384 5151 5369 6184 6401 6027 6281 7235 7489 5975 6228 7174 7425 6851 7140 8225 8513 4841 5250 5978 6387 5083 5513 6277 6706 5298 5529 6390 6620 6199 6468 7476 7746 6146 6413 7412 7679 7047 7353 8499 8805 5058 5491 6291 6695 5311 5766 6574 7030 5446 5688 6621 6863 6372 6655 7747 8030 6318 6599 7681 7961 7244 7566 8806 9128 5505 5962 6775 7232 5780 6261 7113 7594 5825 6080 7086 7341 6815 7113 8291 8589 6757 7052 8220 8515 7747 8086 9424 9763 5721 6202 7058 7539 6008 6512 7411 7916 5972 6240 7323 7590 6987 7300 8568 8881 6928 7238 8494 8805 7943 8299 9739 10095 3818 4311 4600 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4008 4527 4830 4448 4961 5129 base W odeon base 5204 5805 6001 finish see appendix 5159 5755 5949 5915 6599 6821 grommet placement W 6 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified radius rectangular top specification codes sku l w FEB FEC 60 60 42 48 (2) 25'' rectangular bases FFA FFB FFC 66 66 66 36 42 48 (2) 25'' rectangular bases FGC 72 48 (2) 25'' rectangular bases FHC 78 48 (2) 25'' rectangular bases FIC 84 48 (2) 25'' rectangular bases FJC FJD 90 90 48 54 (2) 25'' rectangular bases FKC FKD FKE 96 96 96 48 54 60 (2) 25'' rectangular bases FLC FLD FLE 102 102 102 48 54 60 (2) 25'' rectangular bases FMC FMD FME 108 108 108 48 54 60 (2) 25'' rectangular bases FNC FND FNE 114 114 114 48 54 60 (2) 25'' rectangular bases FOC FOD FOE 120 120 120 48 54 60 (2) 25'' rectangular bases FQC FQD FQE FQF FQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 01/13 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1556 1696 $ 1634 1781 $ 2166 2234 $ 2534 2614 $ 2512 2592 $ 2880 2971 1500 1654 1809 1575 1737 1899 2153 2227 2302 2519 2606 2693 2498 2584 2670 2864 2962 3061 1921 2017 2374 2778 2754 3158 2033 2135 2436 2850 2826 3240 2146 2253 2879 3369 3340 3830 2258 2468 2371 2591 3194 3316 3737 3880 3705 3847 4248 4411 2370 2595 2819 2488 2725 2960 3275 3405 3536 3832 3984 4137 3799 3950 4102 4356 4529 4703 2751 2989 3228 2889 3139 3389 3631 3770 3907 4248 4410 4571 4212 4373 4532 4829 5014 5196 2863 3116 3369 3007 3272 3537 3719 3865 4010 4352 4523 4692 4315 4484 4652 4947 5141 5334 2975 3242 3509 3124 3404 3685 3808 3960 4114 4455 4634 4813 4417 4594 4772 5065 5267 5471 3088 3369 3649 3243 3537 3832 3895 4056 4196 4558 4746 4909 4519 4705 4867 5181 5395 5581 3517 3826 4134 4443 4751 3693 4017 4341 4665 4989 4606 4787 4967 5147 5327 5389 5600 5811 6022 6233 5343 5552 5761 5970 6179 6127 6366 6606 6845 7085 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish see appendix grommet placement W 7 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified radius rectangular top specification codes sku l w FSD FSE FSF FSG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FUD FUE FUF FUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FWD FWE FWF FWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FYD FYE FYF FYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases F1D F1E F1F F1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F3D F3E F3F F3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F5D F5E F5F F5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F7D F7E F7F F7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases F9D F9E F9F F9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 01/13 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 4078 $ 4282 $ 4994 $ 5843 $ 5794 $ 6643 4330 4696 5300 5665 4547 4931 5565 5948 5167 5376 6031 6240 6046 6290 7056 7300 5994 6236 6996 7238 6872 7150 8021 8299 4853 5245 5877 6271 5095 5507 6171 6584 5607 5832 6534 6758 6561 6824 7645 7906 6505 6766 7579 7839 7458 7757 8690 8988 5105 5525 6186 6607 5361 5802 6496 6938 5780 6019 6815 7055 6763 7042 7974 8254 6705 6982 7906 8184 7688 8005 9064 9383 5357 5807 6605 7054 5625 6097 6936 7407 6009 6263 7214 7468 7031 7328 8440 8737 6971 7265 8368 8663 7992 8330 9595 9932 5610 6087 6936 7413 5890 6392 7283 7784 6182 6450 7455 7724 7233 7546 8722 9037 7171 7482 8648 8959 8222 8578 9915 10272 5862 6368 7266 7772 6155 6686 7630 8160 6354 6636 7725 8007 7434 7764 9038 9368 7370 7698 8961 9288 8450 8826 10274 10649 6385 6918 7866 8399 6704 7263 8260 8819 6795 7092 8267 8565 7950 8298 9673 10021 7882 8227 9590 9935 9037 9433 10995 11391 6636 7198 8197 8758 6968 7558 8607 9195 6968 7279 8543 8855 8152 8516 9996 10360 8083 8444 9910 10271 9267 9681 11363 11777 4415 4991 5328 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4635 5241 5595 5190 5789 5984 base W odeon base 6072 6773 7001 6020 6715 6941 finish see appendix 6902 7699 7958 grommet placement W 8 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified sku arched top specification codes w F N F N R S R S $ 2075 $ 2990 $ 3499 $ 3469 $ 3977 2093 2197 3069 3591 3560 4082 2210 2320 3144 3678 3647 4181 2327 2546 2444 2673 3218 3342 3766 3910 3733 3877 4280 4445 2443 2678 2911 2566 2812 3057 3299 3432 3563 3860 4015 4168 3827 3981 4133 4388 4564 4738 2829 3078 3326 2971 3232 3492 3658 3796 3935 4279 4442 4604 4243 4404 4564 4865 5049 5233 2947 3209 3472 3094 3369 3646 3746 3892 4038 4383 4554 4725 4345 4515 4684 4982 5177 5371 3063 3341 3618 3216 3508 3799 3835 3988 4143 4486 4666 4847 4448 4626 4805 5100 5304 5510 3180 3472 3764 4261 4553 3339 3646 3952 4474 4781 3924 4085 4226 4932 5097 4591 4780 4944 5770 5963 4552 4739 4902 5721 5912 5219 5433 5620 6559 6779 78 48/42 (2) 25'' rectangular bases GIC 84 48/42 (2) 25'' rectangular bases GJC GJD 90 48/42 90 54/48 (2) 25'' rectangular bases GKC GKD GKE 96 48/42 96 54/48 96 60/54 (2) 25'' rectangular bases GLC GLD GLE 102 48/42 102 54/48 102 60/54 (2) 25'' rectangular bases GMC GMD GME 108 48/42 108 54/48 108 60/54 (2) 25'' rectangular bases GNC GND GNE 114 48/42 114 54/48 114 60/54 (2) 25'' rectangular bases GOC GOD GOE GOF GOG 120 120 120 120 120 (2) 25'' rectangular bases Q E $ 1976 GHC sku A woodgrain (2) 25'' rectangular bases series E plain abstract 72 48/42 48/42 54/48 60/54 66/60 72/66 A specifications GGC Q top 01/13 l F anigre (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish see appendix grommet placement W 9 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified arched top specification codes A E A E F N F N R S R S plain abstract woodgrain $ 3618 $ 3799 $ 4636 $ 5424 $ 5378 $ 6166 144 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 144 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 144 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4202 4553 5144 4412 4781 5401 5026 5222 5822 5881 6109 6811 5831 6057 6753 6685 6945 7743 GUD GUE GUF 156 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 156 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 156 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4466 4845 5465 4687 5087 5738 5200 5410 6065 6084 6330 7096 6032 6276 7035 6916 7196 8066 GWD GWE GWF 168 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 168 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 168 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4998 5406 6055 5248 5676 6358 5643 5866 6569 6602 6864 7686 6545 6805 7620 7505 7802 8737 GYD GYE GYF 180 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 180 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 180 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 5260 5698 6376 5523 5983 6695 5816 6055 6853 6805 7085 8018 6747 7024 7949 7736 8053 9114 G1D G1E G1F 192 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 192 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 192 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5523 5991 6808 5799 6291 7148 6047 6300 7253 7075 7371 8486 7014 7308 8414 8042 8379 9647 G3D G3E G3F 204 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 204 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 204 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5787 6283 7151 6076 6597 7509 6220 6489 7495 7278 7592 8770 7216 7527 8695 8273 8630 9969 G5D G5E GXF 216 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 216 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 216 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 6049 6575 7494 6351 6904 7869 6394 6677 7766 7481 7812 9086 7417 7745 9009 8504 8880 10329 G7D G7E G7F 228 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 6581 7136 8106 6910 7493 8512 6837 7134 8310 7999 8347 9723 7930 8275 9639 9093 9488 11052 G9D G9E G9F 240 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 6844 7428 8450 7196 7800 8872 7010 7323 8587 8202 8568 10047 8132 8494 9961 9324 9739 11421 sku l w GQC GQD GQE GQF 132 132 132 132 48/36 54/42 60/54 66/54 GSD GSE GSF series Q top Q 01/13 F anigre sku specifications 3939 4261 4582 (3) 25'' rectangular bases (3) 25'' rectangular bases (2) 25'' rect. bases, (1) 30'' rect. base (2) 25'' rect. bases, (1) 30'' rect. base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4136 4474 4811 4816 4998 5179 base W odeon base 5635 5847 6059 finish see appendix 5587 5797 6007 6406 6647 6888 grommet placement W 10 ∞≤√ odeon teleconference tops odeon teleconference tables tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified GREENGUARDCertified sku teleconference top specification codes w specifications IKD IKE 96 54/36 96 60/42 (1) 25'', (1) 30'' rectangular base ILD ILE 102 54/36 102 60/42 (1) 25'', (1) 30'' rectangular base IMD IME 108 54/36 108 60/42 (1) 25'', (1) 30'' rectangular base IOD IOE 120 54/36 120 60/42 (1) 25'', (1) 30'' rectangular base IQD IQE IQF 132 54/36 132 60/42 132 66/48 (2) 25'', (1) 30'' rectangular base ISE ISF 144 60/42 144 66/48 (2) 25'', (1) 30'' rectangular base IUE IUF 156 60/42 156 66/48 (2) 25'', (1) 30'' rectangular base IWE IWF 168 60/42 168 66/48 (2) 25'', (1) 30'' rectangular base IYE IYF 180 60/42 180 66/48 (2) 25'', (1) 30'' rectangular base I1E I1F 192 60/42 192 66/48 (2) 25'', (1) 30'' rectangular base I3F 204 66/48 (1) 25'', (2) 30'' rectangular base series Q top Q 01/13 l sku (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (2) 25'', (1) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre cherry maple oak walnut laminate F anigre A E A E F N F N R S R S plain abstract woodgrain $ 2872 $ 3016 $ 3714 $ 4346 $ 4308 $ 4940 3304 3564 3469 3742 4112 4263 4811 4988 4770 4945 5469 5670 3441 3716 3613 3902 4216 4372 4933 5115 4891 5071 5608 5815 3716 4023 3902 4224 4425 4578 5177 5356 5133 5310 5885 6088 4215 4552 4889 4426 4780 5133 5222 5418 5615 6109 6339 6569 6057 6284 6513 6945 7205 7468 4858 5487 5101 5761 5661 6314 6623 7388 6566 7631 7529 8398 5164 5824 5422 6115 5865 6579 6863 7697 6804 7324 7801 8750 5764 6454 6052 6777 6362 7128 7444 8339 7380 8268 8462 9480 6070 6791 6374 7130 6566 7435 7682 8699 7616 8624 8733 9888 6376 7248 6695 7610 6832 7871 7994 9209 7925 9130 9087 10468 7608 7989 8133 9515 9434 10817 3117 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 3273 3857 base W odeon base 4513 finish see appendix 4474 5130 grommet placement W 11 ∞≤√ odeon mediatracTM MediatracTM Mediatrac™ is a simplified system for routing power and data to the conference table worksurface while managing wires and auxiliary equipment. The Mediatrac™ rail system is standard on most Bernhardt Design conference table tops. This rail system provides the location for mounting bases and installing auxiliary components for wire and equipment management. The rails also provide critical structural integrity to the conference table top allowing for longer spans with greater strength and dimensional stability. Illustration showing MediatracTM grommets Mediatrac™ grommet system provides power and 16 different options of Extron data configurations. Grommets are available in 6 different sizes ranging from an 8” x 4” single door unit to a 96” x 8” double door unit. All units have a polished aluminum trim with options of polished aluminum, laminate or wood veneer doors to match the finish and grain direction of the conference table top. Mediatrac™ grommets are sold and shipped separately and are easily installed from the top of the table. Hardwired and corded power are available. 96'' x 8'' 72'' x 8'' 48'' x 8'' 24'' x 8'' 8'' x 8'' 8'' x 4'' Illustration showing MediatracTM range of available sizes. 01/13 Power and data locations in MediatracTM grommets 12 ∞≤√ odeon mediatracTM MediatracTM Power and Data The power modules for MediatracTM mount in the grommet assembly allowing for ease of installation as well as maximum flexibility when hardwired units are being connected. MediatracTM grommets are available in either corded or hardwired assemblies. Power is provided standard in all skus, however, corded or hardwire must be specified. All assemblies are CSA approved and certified for use in all US cities. Corded units: Two or four 110V / 15 amp grounded outlets with 10 feet of 14 gauge SJT grounded cord. CSA approved. Hardwire units: Two or four 110V / 15 amp grounded outlets with 6 feet of 3/8” black liquid tight conduit with an extra 1 foot of wire exposed at the end of the conduit. CSA approved. All MediatracTM grommets are designed to accept Extron AAP plates. For every location of a power module, there are locations for two single AAP plates. A blank plate will cover both slots when shipped from the factory. Extron AAP’s must be specified separately. If an AAP is specified, it is the responsibility of the user’s technical staff to field install. Note: If a single AAP is all that is required, then specify a C-VGG blank single cover plate to cover the second available slot. MediatracTM Grommet Detail - Power MediatracTM has 8 different categories of data connectors totaling 16 different AAP plates. For special applications, more than 100 different AAP plates are available directly through Extron: http://www.extron.com/company/article.aspx?id=aapmaap Extron AAP Plates One RJ-11 Female Barrel Phone One RJ-45 CAT5e & CAT6 Two RJ-45 CAT5e & CAT6 Two USB A RCA Jacks 15 Pin VGA Stereo Mini Jack When the Cable Pass-Through AAP is specified, the Cable Sling will also need to be ordered to manage the wires under the worksurface. Single Blank Plate Extender 15 Pin VGA Stereo Mini Jack Cable Pass-Through Two RJ-45 CAT5e 01/13 13 ∞≤√ odeon mediatracTM MediatracTM MediatracTM grommets are available in 6 different sizes with either polished aluminum, laminate or wood veneer doors MediatracTM grommets mount between the MediatracTM rail Illustration showing two dfferent sizes of the MediatracTM grommet system Outlet strip Wire management clip - 4 are included with MediatracTM rails Cable sling for use with Extron cable pass-through modules MediatracTM single unit grommet Equipment tray MediatracTM rails - standard on all tops Polished aluminum MediatracTM rail end cap - included on all tops with MediatracTM rails Illustration showing the available accessories for the MediatracTM rail and grommet system 01/13 14 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations Illustration showing Odeon bases configured and wired for the P20 Mediatrac configuration. MediatracTM rail system is standard on all tops Removable laminate or veneer panels 25'' Square Base 30'' Square Base Odeon base with floor monument outside of the base 01/13 15 ∞≤√ odeon mediatracTM MediatracTM MediatracTM equipment tray Assembly showing the MediatracTM equipment tray used to accomodate various types of equipment to support data needs of the table. Location of available power strip Location of possible LAN / Ethernet Switch Boundary microphone location inside of rail Power cord from MediatracTM grommet Location of possible component hub for microphones Assembly showing the MediatracTM equipment tray when used with boundary microphones. This tray can be used to mount microphone hubs and controllers for various electronic components. MediatracTM cable sling Assembly showing the MediatracTM cable sling used in conjunction with the Extron pass-through AAP module. In this configuration the customers’ cables are used. 01/13 16 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon M12 code designates the machining pattern for (2) 24'' MediatracTM grommets, sold separately. Illustration shows the P15 configurations with both the Mediatrac™ and the Polycom™ grommets P12 code designates the machining pattern for (2) 24'' MediatracTM grommets and (3) 1'' Polycom grommets, sold separately. MediatracTM grommets are available with either laminate, polished aluminum or wood veneer doors. When wood veneer doors are specified, the grain of grommet doors will run with the grain direction of the table top. Mediatrac grommets are available in two different configurations coded starting with the letter: M represents the Mediatrac grommet options P represents the combination of Mediatrac grommets and 1” round grommets located for the use of Polycom or similar speakerphone systems. This allows all wiring to be concealed and managed. 54'' - 60'' Square and Round MO1 MO1 MO3 MO3 60'' - 72'' Table 6 Seats 9∑"- 21∑" CENTER 21" 18-24" 21" 21" MO6 MO4-PO4 MO3 MO2-PO2 8-14" 24" MO5 Available on 66'' and 72''Tops 84'' - 90'' Table 6 Seats 33∑-36∑" CENTER 21" MO3 MO4-PO4 MO5-PO5 13-16" 24" 5-8" 21" MO6 02/09 MO7 MO8 48" 24" 21" MO9 Available on 90'' Tops 17 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 96'' - 108'' Table 8 Seats 11-17" 38-50" 21" 21" MO4-PO4 MO5-PO5 MO8 5" 15-21" 48" 21" 24-30" MO9 24" 21" 21" M10 18" 48" 21" M11 Available on 108'' Tops 24" M12-P12 Available on 108'' Tops 114'' - 120'' Table 10 Seats 20-23" 21" 48" 48” 33-36" 21" MO9 MO8 MO4-PO4 8-11" 24-27" 21" 21" M10 M11 24-30" 21" 21-24" M12-P12 72" M13 132'' - 144'' Table 12 Seats 19-23" 21" 21" MO4-PO4 M14-P14 7-10" 5-11" 19-25" 24" M15-P15 96” 72" 21" 24" M16 Available on 144'' Tops M17 156'' - 168'' Table 14 Seats 96” 21" MO4-PO4 27-31" 21" 30-36" M16 M14-P14 5-11" 18-30" 21" M17 01/13 21" M18-P18 48" 21" M19 18 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 180'' - 192'' Table 16 Seats 96” MO4-PO4 M18-P18 M20-P20 M21-P21 M19 204'' - 218'' Table 18 Seats 96” MO4-PO4 M20-P20 M19 M22-P22 M21-P21 M23 228'' - 240'' Table 20 Seats M22-P22 MO4-PO4 M25 M26-P26 96” 96” M24 Available on 240'' Tops 19 ∞≤√ odeon mediatracTM description sku w d h aluminum VAZ 2 grounded outlets, 1 exit plug VAT accepts 2 Extron single space AAP’s polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 4 4 wood/laminate VWZ 2 grounded outlets, 1 exit plug VWT accepts 2 Extron single space AAP’s aluminum frame laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 weight specifications grade 1 grade 2 3∑ 3∑ corded hardwired $ 742 742 - 4 4 3∑ 3∑ corded hardwired 907 907 907 907 aluminum VAY 8 4 grounded outlets, 1 exit plug VAS 8 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 955 955 - wood/laminate VWY 4 grounded outlets, 1 exit plug VWS accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1120 1120 1120 1120 aluminum VAX 24 4 grounded outlets, 1 exit plug VAR 24 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1061 1061 - wood/laminate VWX 4 grounded outlets, 1 exit plug VWR accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1227 1227 1227 1227 grade 3 8'' single door communication grommet - - - 907 907 8'' double door communication grommet 8 8 - - - 1120 1120 24'' door communication grommet specification codes series F conference 01/13 F sku 24 24 veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - - - 1227 1227 finish 6 polished aluminum 6 20 ∞≤√ odeon mediatracTM description sku w d h weight specifications grade 1 grade 2 aluminum VAW 8 grounded outlets, 2 exit plugs VAQ accepts 8 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors $ 1808 1808 - wood/laminate VWW 8 grounded outlets, 2 exit plugs VWQ accepts 8 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors 2027 2027 2027 2027 aluminum VAV 12 grounded outlets, 3 exit plugs VAP accepts 12 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2554 2554 - wood/laminate VWV 12 grounded outlets, 3 exit plugs VWP aluminum frame accepts 12 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2826 2826 2826 2826 aluminum VAU 16 grounded outlets, 4 exit plugs VAO accepts 16 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3338 3338 - wood/laminate VWU 16 grounded outlets, 4 exit plugs VWO accepts 16 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3625 3625 3625 3625 grade 3 48'' door communication grommet - - - 2027 2027 72'' door communication grommet - - - 2826 2826 96'' door communication grommet specification codes series F conference 01/13 F sku veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - - - 3625 3625 finish 6 polished aluminum 6 21 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price phone/data module VGV 3∑ - ∏ $ 119 VGI 3∑ - ∏ 119 VGJ 3∑ - ∏ 129 VGD 3∑ - ∏ 155 - 1Ω 155 129 Extron® AAP one RJ-11 phone barrel female to female black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 HCI CAT 5e female to female barrel black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 female to punch down block leviton CAT5 data single space insert phone/data module Extron® AAP two RJ-45 pass-through barrels CAT 5e single space insert VGF phone/data module 3∑ Extron® AAP two RJ-45 pass-through barrels CAT 5e double space insert phone/data module VGK 3∑ - ∏ VGP 3∑ - ∏ Extron® AAP one RJ-45 female to punch down block leviton CAT6 data single space insert phone/data module 196 Extron® AAP two RJ-45 female to punch down block leviton CAT6 data single space insert specification codes 01/13 series veneer style pull/hardware C accessories sku X none X none X none C X X X finish X X X 22 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price phone/data module VGL 3∑ - ∏ $ 196 VGM 3∑ - ∏ 196 VGN 3∑ - ∏ 196 VGQ 3∑ - 1Ω 279 3∑ - ∏ 196 - ∏ 273 Extron® AAP two RJ-45 female to punch down block AMP CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block seimon CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block ortronics CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block higher than CAT6 data type connectors systomax MGS500 backward compatible double space insert computer/audio/video module VGC Extron® AAP 15HD, F-F, 15 pin HD female to female 3.5mm stereo mini jack to solder tabs with silk screen “COMPUTER” and “AUDIO” single space insert computer/audio/video module VGE 3∑ Extron® Interface AAP 15HD, F-F, 15 pin VGA female to female 3.5mm stereo mini jack female to female silk screen, “COMPUTER” and “AUDIO” single space insert specification codes 01/13 series sku veneer style pull/hardware C accessories X none X none X none C X X X finish X X X 23 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price computer/audio/video module VG2 3∑ - 1∏ 196 3∑ - ∏ 210 3∑ - ∏ 310 Extron® AAP 15HD, one DVI-I female to female barrel, single space insert single space insert computer/audio/video module VG3 Extron® AAP HDMI female to HDMI female on 10'' pigtail single space insert computer/audio/video module VG4 Extron® AAP 15-pin HD female to 5 BNC on 8''- 12'' staggered length pigtails 3.5mm stereo mini jack barrel single space insert control/computer module VGX 3∑ - 1∏ 917 Extron® AAP extender with black powdercoat finish VGA line driver with audio, signals up to 250' double space insert control/computer module VGR 3∑ - ∏ 258 VGT 3∑ - ∏ 155 3∑ - ∏ 67 - 1Ω 248 Extron® AAP two USB A female to female barrels single space insert computer/audio/video module Extron® three RCA with black powdercoat finish female to female barrels single space insert VGG blank plate Extron® AAP blank plate with black powdercoat finish single space insert cable pass-through module VGY 3∑ Extron® AAP cable pass-through with black powdercoat finish sold and ordered as 1 set with left and right specify for use with C-VMW cable sling specification codes 01/13 series veneer style pull/hardware C accessories sku X none X none X none C X X X finish X X X 24 ∞≤√ odeon wire management description sku w d h speaker phone grommet VGZ 1 1 1∫ GNC GMT 3 3 3 3 ∆ ∆ VGS 8π 4π 26∫ 2∑ 2∑ 30 weight specifications price $ 54 polished aluminum specify pull/hardware code 6 communication grommet 65 50 specify with table top order field installed die cast zinc polished aluminum fits 2∑'' opening specify pull/hardware code 6 wire management system 210 gray, nylon mesh, 2π’’ diameter zippered wire management cover mounting bracket not designed as table support bracket dimensions: 8π’’w x 4π’’d x 1∂”h cover dimensions: 2π’’w x 2π’’d x 24∆”h specify pull/hardware code X wire management snake VGW 240 black plastic flexible cable management system weighted metal base specify pull/hardware code X specification codes 01/13 series sku veneer style C accessories X none X none C X X pull/hardware finish 6 polished aluminum X none X X X 25 ∞≤√ odeon wire management description sku w d h weight specifications price equipment tray VMZ VMY 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases VMX VMW 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases VNZ 6 2∂ 1π 40 VNY 12∂ 2 1π 316 $ 150 161 silver powdercoat VMZ - use with Odeon 25'' base VMY - use with Odeon 30'' base cable sling 150 161 grey nylon mesh material hooks onto mediatracTM rails specify with Extron pull-through AAP C-VGY wire clip smoke polycarbonate finish 4 included with each table power strip 6 outlet center; 110v 15 amp 15' plug in cord surge protector UL Listed specification codes 01/13 series sku veneer style pull/hardware C accessories X none X none X none C X X X finish X X X 26 ∞≤√ odeon Odeon Concept and Assembly Overview MediatracTM grommet system Top assembly Includes the top and the MediatracTM rail assembly Base Exploded view of the construction concept. Order the MediatracTM grommet system For power and data required at the work surface Order the desired top MediatracTM rail system is pre-installed and included in the price. Order the base design The base will straddle the rails. Exploded side view of table ordering process. 01/13 27 ∞≤√ odeon Odeon Base Location Top Length Top Width Top Overhang Top Overhang Top Edge to Center of Base Base Width Top Overhang Summary for End Conditions Top Overhang Summary for Side Conditions Top Edge to the Center of Base 01/13 Top Length Top Overhang 25''/30'' Rect. 25'' Square 30'' Square Base Width Top Width Top Overhang 72'' 78'' 84'' 90'' 96'' 102'' 108'' 114'' 120'' 132'' 144'' 156'' 168'' 180'' 192'' 204'' 216'' 228'' 240'' 18π'' 18π'' 18π'' 19π'' 19π'' 19π'' 20π'' 20π'' 20π'' 21π'' 21π'' 22π'' 22π'' 22π'' 22π'' 24'' 24'' 25'' 25'' 23π'' 23π'' 23π'' 24π'' 24π'' 24π'' 25π'' 25π'' 25π'' 26π'' 26π'' 27π'' 27π'' 27π'' 27π'' 29'' 29'' 30'' 30'' 31∂'' 31∂'' 31∂'' 32∂'' 32∂'' 32∂'' 33∂'' 33∂'' 33∂'' 34∂'' 34∂'' 35∂'' 35∂'' 35∂'' 35∂'' 36∑'' 36∑'' 37∑'' 37∑'' 33π'' 33π'' 33π'' 34π'' 34π'' 34π'' 35π'' 35π'' 35π'' 36π'' 36π'' 37π'' 37π'' 37π'' 37π'' 39'' 39'' 40'' 40'' 25'' 25'' 30'' 30'' 30'' 48'' 54'' 60'' 66'' 72'' 11∑'' 14∑'' 15'' 18'' 21'' 28 ∞≤√ appendix - finishes Finish Selections A three character sku identifies the finish on each species or the laminate selection. Individual components are priced with standard finish or standard laminate. A variety of standard laminate finishes are available. Additional laminate colors may be available but are subject to upcharges and extended lead times. The laminate option is available on components where noted as an option in the series specification code. Listed are the standard laminates. Special finishes on veneers made to customer specifications are subject to factory approval and a 5% net upcharge with a $500 net minimum. Transparent stains and sealers are applied in multiple steps to enhance the beauty of the natural wood. A durable, baked-on, top-coat of conversion varnish or UV topcoat is applied to protect the product. It is recommended that felt, cork or fabric backed desk pads and accessories are used on worksurfaces to miminize wear. When specifying light finishes such as 836, 837, 840 or 850, the color and characteristic variances of both veneer and solid wood are apparent. Therefore, exact color matches are not possible. Q Anigre Standard Finish 840 805 841 823 834 850 860 836 861 839 J Cherry Standard Finish 839 805 834 840 835 841 861 836 E Oak Standard Finish 805 860 836 861 837 865 839 866 840 9 Plain/Abstract Laminate 601 Solid White, Nevamar S-7004T, with Solid White Edge 604 Winter Gray Matrix, Nevamar MR-6005T, with Platinum Edge 605 Straw Matrix, Nevamar MR-2006T, with Platinum Edge 611 Brite White, Formica 459-58, with Designer White Edge 644 Stop Red, Formica 839-58, with Spectrum Red Edge 645 Smoky White, Nevamar S7027T, with Frosty White Edge 646 Cordial Gray, Nevamar S6024T, with Featherstone Edge 647 Birch, Formica 921-58, with Haze Edge 660 Folkstone, Formica 927-58, with Fashion Grey Edge 661 Fog, Formica 961-58, with Dove Grey Edge 662 Black, Formica 909-58, with Black Edge 694 Almond, Nevamar S2037T, with Almond Edge 695 Tawny White, Pionite SW812, with Antique White Edge 696 Taupe, Pionite ST606, with Khaki Brown Edge 697 Sandcastle, Nevamar S209T, with Pepperdust Edge Maple Standard Finish 837 850 C F Standard Plain/Abstract W Woodgrain Laminate Standard Woodgrain 670 Gunstock Savoy Walnut, Pionite WW971, with Columbian Walnut Edge 685 Grand Isle Maple, Nevamar W8371T, with African Limba Edge 686 Valencia Teak, Nevamar WT0003PV, with Shadow Oak Edge 687 Sovereign Cherry, Nevamar W8325T, with Wild Cherry Edge 688 Clear Maple, Nevamar WM8340T, with Natural Maple Edge 689 Kingsley, Pionite WW011, with Kingsley Edge 690 Cocoa Maple, Formica 7739-58, with Cocoa Maple Edge 691 Prestige Walnut, Formica 6209-43, with Shadow Oak Edge 692 Select Cherry, Formica 7759-43, with Select Cherry Edge 693 Northern Oak, Formica 7152-58, with Clear Maple Edge Walnut Standard Finish 823 839 841 860 861 866 06/12 29 ∞≤√ guaranteed freight program Preferred Carrier Guaranteed Freight Rates Freight charges will be applied to orders as a separate line item based on the zones listed. The freight amount is calculated on the total merchandise net COM price, excluding any extra discounts beyond standard net pricing. Additional freight fuel surcharges may apply. All orders are shipped by Bernhardt Design company trucks or preferred carriers specified by Bernhardt Design. Rates are based on deliveries made Monday through Friday, 8 a.m. until 5 p.m. Dealer warehouse information, including phone number and contact name, must be specified on the purchase order. Direct site deliveries may be requested with an additional freight cost. Freight rates are based on zones with a minimum for each zone. All zones are within the Continental United States. Note: Average Service Days excludes ship day. Mininum Charge Freight Rate Average Service Days 1 $80 5% 2-4 Business Days 2 $80 6% 2-4 Business Days 3 $90 7% 2-4 Business Days 4 $90 8% 3-5 Business Days 5 $90 9% 5-7 Business Days 6 $110 10% 5-7 Business Days 7 $110 11% 6-9 Business Days 8 $120 12% 7-10 Business Days 9 $120 13% 7-10 Business Days 10 $120 15% 8-12 Business Days Zone 5 10 5 7 5 9 4 3 6 1 2 8 3 7 5 01/13 30 ∞≤√ Prices and Terms Prices and specifications are subject to change without notice. All prices quoted will be FOBour factories. Terms are net 30 days. A service charge of 1∑% per month will be charged on all past due accounts. Order Entry All orders are subject to final acceptance by Bernhardt Design in Lenoir, NC. Receipt of our acknowledgment indicates acceptance of your order subject to the terms set forth on the acknowledgment. Bernhardt Design attempts to clarify all purchase orders. However, in the event the price list number and description on the purchase order differ, the price list number will prevail. Change Orders All reasonable requests for changes to standard table orders will be honored if received in writing prior to the start of production. Custom design and special finish orders are not subject to revision after acknowledgment. Bernhardt Design reserves the right to charge for labor, materials and administration costs for all order changes. Cancellations All acknowledged orders are considered as firm orders and are not subject to cancellation. Custom Design Bernhardt Design may alter products to meet specific needs. Contact your local sales represent-ative when a custom design is needed. Custom designs require minimum quantities, additional lead time and upcharges. A custom job number, available from your local sales representative, must be submitted with purchase orders. Orders combining custom design with standard product cannot be scheduled for production until custom items are approved. Shipping Bernhardt Design will ship in accordance with customer instructions whenever possible. If not specified, Bernhardt Design will exercise its best judgement in selecting a carrier. Orders in production will be shipped as scheduled and cannot be held. 01/13 appendix - terms and conditions High quality cartoning which meets trucking and railroad specifications is standard at no extra charge. Storage If a customer is unable to accept an order when it is ready for shipment, storage may be requested. Acceptance of storage will be at the discretion of Bernhardt Design. All costs including transportation will be at customer expense. A storage charge of 1∑% of the invoice will be assessed for every 30 days, or any part thereof, that merchandise remains in storage. Bernhardt Design considers transfer to storage the equivalent of delivery. This includes invoicing and payment. Customers will bear all risk of damage or loss during storage. Freight Damage and Claims Bernhardt Design is not liable for damages that occur during transit or storage. The carrier assumes all responsibility upon acceptance of product. It is the customer’s responsibility to inspect all products upon receipt and file any claims with the carrier. No product should be refused. If products are received damaged, a written exception should be made on the bill of lading and an immediate inspection be requested of the carrier. Concealed damage must be reported to the carrier within 15 days of receipt. Failure to make claims shall constitute acceptance of the products and waiver any claims of defects, errors or shortages. In the event delivery is made on a Bernhardt Design truck, the products should be carefully inspected for transit damage. If contents are damaged, the driver should be notified to call his dispatcher for immediate disposition. Concealed damage must be reported within 15 days of receipt and product/ packaging held for inspection by a Bernhardt Design representative. Replacements for product damaged in shipment or storage will be manufactured upon receipt of a purchase order. Returns No merchandise may be returned to Bernhardt Design without written consent in the form of a Return Authorization from our Quality Assurance Department stating reason for return and how the item will be shipped. In the event a return is authorized by Bernhardt Design for reasons other than damage or defect, the customer shall be responsible for a 25% restocking fee, as well as a double freight charge. Unauthorized returns will be automatically refused by our receiving department as well as returns not in accordance with Bernhardt Design shipping instructions. Liability for defective merchandise shall be limited to the replacement or repair of that merchandise, and Bernhardt Design shall not be liable for other damages or losses. Measurements and Weights All measurements and weights are approximate and subject to change without notice. Care and Cleaning Finished wood surfaces should be cleaned with a soft damp cloth, wiping in the direction of the grain. Dry with a soft cloth, wiping in the grain direction. Do not use waxes or furniture polish, as these will cause a film build-up. Wood Finishes Bernhardt Design tables are available in standard finishes compatible with casegoods and seating finishes. However, finishes on tables may vary slightly from those on casegoods and seating due to the natural characteristics of the wood. No absolute match is implied or guaranteed. Light Finishes Bernhardt Design offers lighter finishes 836, 837, 840, and 850. Light finishes do not hide or mask the natural characteristics of the wood. It is important that the dealer and customer understand that inherent natural characteristics of the wood will vary from piece to piece when using a light finish. Natural characteristics include the natural discolorations of the wood substance and color variations in glued up stock. These natural characteristics are not considered defects by Bernhardt Design, and therefore merchandise will not be replaced because of these natural characteristics. 31 ∞≤√ Special Finishes Special finishes, made to customer specifications and subject to factory approval, may be available at a 5% net upcharge with a $500 net minimum. Additional leadtime may be required for special finish items. Special finish orders will not be acknowledged until the special finish sample is approved in writing and received by Bernhardt Design Customer Service. Special finish orders are not subject to revision or cancellation after acknowledgment. Warranty Bernhardt Design will repair or replace, at its discretion and without charge to the original purchaser, any table product or part thereof which fails as the result of defects in material and workmanship, under single shift use and normal care, for five years from date of shipment. This warranty does not cover misuse or abuse of product, dramatic temperature changes, exposure to unusual conditions, or damages incurred by contact with seating products. Repair or replacement of discontinued product will be at the discretion of Bernhardt Design. Natural color changes, variations or movements in lumber or veneer products, exposure to extreme temperature changes and direct sunlight may cause color changes and/or surface damage. These are circumstances beyond the control of Bernhardt Design and are not warranty issues. Drawer glides, drawer boxes, drawer pulls, and locking mechanisms have a Life-Time Warranty for the original purchaser. Power or communications components are warranted for one (1) year. This warranty is the customer’s exclusive remedy for product defect and does not apply to damage caused by a carrier, dealer, installer, user modification, or attachments to a product. appendix - terms and conditions Bernhardt Design has the exclusive right to make the final determination of product misuse or abuse. Except as stated above, Bernhardt Design makes no express or implied warranties as to any product, and in particular, makes no warranty of merchantability or of fitness for any particular purpose. Bernhardt Design shall not be liable for any consequential or incidental damages or for commercial loss arising from any product defect. The Bernhardt Design customer is the dealer. All complaints must be resolved through the dealer from which the furniture was purchased. To obtain warranty service the dealer must supply dated proof of purchase. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. General Services Administration Products available on the Bernhardt Design GSA - Federal Supply Service Contract GS-28F-7040G are noted in the product descriptions. For information regarding GSA pricing, please contact your local Bernhardt Design sales representative or call 828 759 6337. Send all GSA payments to: 12197 Collections Center Drive Chicago IL 60693 Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply. Design and Patent Rights All of the products shown in Bernhardt Design catalogs and described in Bernhardt Design price lists are, and remain, the property of Bernhardt Design, with the sole right reserved to manufacture and to distribute. Some of the product designs shown are patented in the United States and will remain the property of Bernhardt Design. Any reproduction of the products constitutes an infringement of patented copyright laws and will be subject to prosecution. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. ∞≤√ Bernhardt Design is a registered trademark of Bernhardt Furniture Company of Lenoir, NC. 01/13 32
Similar documents
Tables PL 1/2007
top 66'' - 72'' width x 132'' - 240'' length
have 4 sectional veneer matched tops
approved for GSA Contract GS-28F-7040G
Tables PL 1/2007 - Bernhardt design
The Odeon conference table is GREENGUARD Certified
and certificates are available on Bernhardtdesign.com or
GREENGUARD.org. Bernhardt Design also offers FSC
chain-of-custody certification for confe...