Tables PL 1/2007
Transcription
Tables PL 1/2007
∞≤√ 2014 Odeon Price Increase Effective January, 2014 3% odeon price list 2013 ∞≤√ odeon base Odeon Base Rectangular Odeon Base Bottom View Square Odeon Base Clear Opening Dimensions The Odeon conference table features bases of bent plywood with quarter cut maple veneer faces available in both rectangular and square shapes. Bases and tops are specified and sold separately. See the specific top size desired for the appropriate number of bases required. One side of each base has a removable access panel for easy entry into the base for wire management. Large openings on both the bottom and top provide the largest possible open area for floor monuments. The Odeon base is designed to work with the Mediatrac rail system. When installed, the Odeon base will straddle the rails and provide clear access for the Mediatrac grommet system if specified. The Odeon conference table collection is available upon request with certifications for level® 1, GREENGUARD and FSC Chain-of-Custody. Requests must be made in writing in advance of or during the quoting process as upcharges may apply. For complete information regarding the level 1, GREENGUARD and FSC certifications for Odeon, please contact [email protected]. 25'' Rectangular - 18∂'' x 6∑'' 30'' Rectangular - 23∂'' x 6∑'' 25'' Square - 18∑'' x 21'' 30'' Square - 23∂'' x 26'' Removable Veneer Panel 3Ω'' 28∂'' 1∂'' 25'' - 30'' Side View End View 25'' Rectangular - 10'' 30'' Rectangular - 10'' 25'' Square - 25'' 30'' Square - 30'' description sku w d h weight specifications odeon base ZLU ZLV 25 30 10 10 28∂ 28∂ laminate laminate ZYU ZYV 25 30 10 10 28∂ 28∂ veneer veneer ZLR ZLS 25 30 25 30 28∂ 28∂ laminate laminate ZWR ZWS 25 30 25 30 28∂ 28∂ veneer veneer laminate $ 1903 2018 veneer $2142 2251 rectangular odeon base - 2595 2825 - square specification codes series W conference W 00/13 sku veneer laminate F plain/abstract laminate W woodgrain laminate veneer J cherry E maple C oak 9 walnut Q anigre 2745 3020 - style X none 6 base polished aluminum X 6 - finish see appendix 2 ∞≤√ odeon tops Odeon Tops Top ships with Mediatrac rail system pre-installed Top is available with optional Mediatrac grommets 25'' Base - 12∂'' 30'' Base - 17∂'' Odeon bases straddle the Mediatrac rails when installed Odeon tops are specifically constructed to accommodate the Odeon bases. Tops and bases are specified and sold separately. See the specific top size desired for the appropriate number of bases required. Depending on the width of the top specified, the Mediatrac rail placement will either have 12∂” or 17∂” inside clearance. The recommended base sizes must be specified to ensure a proper alignment and fit. All Odeon tops are pre-installed with the Mediatrac rail system as part of their standard construction and are ready to accept any Mediatrac grommet configuration. The Odeon conference table collection is available upon request with certifications for level® 1, GREENGUARD and FSC Chain-of-Custody. Requests must be made in writing in advance of or during the quoting process as upcharges may apply. For complete information regarding the level 1, GREENGUARD and FSC certifications for Odeon, please contact [email protected]. Detail view of the Odeon top with the base and the Mediatrac grommet. Laminates - Grade 1 F W Plain/Abstract Laminate Woodgrain Laminate A variety of standard laminate finishes are available with vinyl edge bands specifically formulated to correspond to standard laminates. See finish selections in the appendix for standard laminates and edge bands. Veneer - Grade 2 J Cherry - Flat Cut 9 Walnut - Flat Cut E Maple - Flat Cut Veneer - Grade 3 Q Anigre - Quarter Cut Edge Group B Edge Group A A Block specification codes series Q top Q 00/13 sku C Oak - Rift Cut F Flat veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre E Stepped R Reverse Bevel edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped base W odeon base N Bevel finish see appendix S Shaped grommet placement W 3 ∞≤√ odeon tops cherry maple oak walnut odeon tables laminate tops sold separately order bases separately see mediatracTM for available grommet locations approved for GSA Contract GS-28F-7040G Level1 Certified GREENGUARDCertified square top arched square top radius square top round top specification codes sku l w ADD AEE 54 60 54 60 (1) 25'' square base BDD BEE 54 60 54 60 (1) 25'' square base CDD CEE 54 60 54 60 (1) 25'' square base DDD DEE 54 60 54 60 (1) 25'' square base series Q top Q 00/13 sku specifications (1) 25'' square base (1) 25'' square base (1) 25'' square base (1) 25'' square base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1300 $ 1365 $ 1869 $ 2187 $ 2168 $ 2486 1300 1512 1365 1588 1909 2035 2234 2381 2215 2360 2540 2706 1300 1515 1365 1588 1909 2035 2234 2381 2215 2360 2540 2706 1300 1512 1365 1588 1929 2053 2257 2402 2238 2382 2566 2731 1512 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 1588 1990 base W odeon base 2328 2308 finish see appendix 2646 grommet placement W 4 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified rectangular top specification codes sku l w EGC 72 48 (2) 25'' rectangular bases EHC 78 48 (2) 25'' rectangular bases EIC 84 48 (2) 25'' rectangular bases EJC EJD 90 90 48 54 (2) 25'' rectangular bases EKC EKD EKE 96 96 96 48 54 60 (2) 25'' rectangular bases ELC ELD ELE 102 102 102 48 54 60 (2) 25'' rectangular bases EMC EMD EME 108 108 108 48 54 60 (2) 25'' rectangular bases ENC END ENE 114 114 114 48 54 60 (2) 25'' rectangular bases EOC EOD EOE 120 120 120 48 54 60 (2) 25'' rectangular bases EQC EQD EQE EQF EQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 00/13 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases; 4 piece tops (3) 30'' rectangular bases; 4 piece tops veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1345 $ 1412 $ 2038 $ 2384 $ 2364 $ 2710 1422 1493 2091 2446 2425 2781 1687 1771 2396 2803 2779 3187 2027 2213 2128 2323 2803 2910 3280 3404 3252 3375 3728 3870 2126 2325 2522 2232 2441 2648 2874 2986 3099 3362 3493 3625 3333 3463 3594 3822 3971 4121 2463 2674 2883 2586 2807 3028 3188 3306 3426 3729 3868 4008 3698 3835 3974 4239 4397 4556 2562 2785 3008 2690 2924 3158 3263 3390 3516 3818 3966 4114 3785 3932 4078 4340 4508 4676 2661 2897 3132 2794 3041 3288 3340 3472 3605 3908 4063 4218 3875 4029 4182 4442 4619 4794 2760 3008 3256 2898 3158 3418 3417 3555 3676 3998 4160 4301 3964 4124 4264 4545 4729 4889 3138 3412 3684 3956 4229 3295 3582 3868 4154 4440 4067 4225 4384 4544 4703 4759 4944 5130 5316 5502 4718 4901 5086 5271 5455 5409 5620 5831 6043 6255 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish see appendix grommet placement W 5 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified rectangular top specification codes sku l w ESD ESE ESF ESG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EUD EUE EUF EUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EWD EWE EWF EWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EYD EYE EYF EYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases E1D E1E E1F E1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E3D E3E E3F E3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E5D E5E E5F E5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E7D E7E E7F E7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases E9D E9E E9F E9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 00/13 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 3634 $ 3816 $ 4410 $ 5159 $ 5115 $ 5865 3857 4179 4713 5036 4050 4388 4948 5287 4561 4747 5323 5509 5337 5554 6228 6445 5291 5506 6175 6390 6066 6313 7080 7327 4317 4664 5223 5570 4533 4898 5485 5849 4951 5149 5768 5966 5793 6024 6749 6980 5743 5972 6691 6920 6585 6848 7671 7934 4540 4913 5496 5867 4767 5158 5770 6160 5103 5313 6017 6229 5970 6217 7040 7288 5919 6164 6980 7226 6786 7067 8003 8285 4763 5160 5866 6262 5001 5418 6159 6575 5306 5530 6370 6593 6208 6470 7453 7713 6155 6414 7389 7647 7057 7354 8472 8768 4986 5408 6158 6578 5235 5678 6466 6907 5457 5694 6582 6819 6385 6662 7700 7978 6330 6605 7635 7910 7258 7574 8754 9069 5210 5656 6449 6896 5471 5939 6771 7240 5610 5859 6820 7069 6564 6855 7979 8271 6507 6797 7911 8200 7461 7793 9070 9402 5670 6141 6978 7449 5954 6448 7327 7821 6000 6262 7299 7561 7020 7327 8539 8846 6960 7264 8466 8771 7981 8329 9707 10056 5893 6388 7270 7765 6188 6708 7634 8154 6151 6427 7542 7818 7197 7519 8825 9147 7135 7455 8749 9069 8181 8548 10031 10398 3932 4400 4738 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4129 4662 4975 4581 5110 5283 base W odeon base 5360 5979 6181 finish see appendix 5314 5928 6128 6093 6797 7026 grommet placement W 6 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified radius rectangular top specification codes sku l w FEB FEC 60 60 42 48 (2) 25'' rectangular bases FFA FFB FFC 66 66 66 36 42 48 (2) 25'' rectangular bases FGC 72 48 (2) 25'' rectangular bases FHC 78 48 (2) 25'' rectangular bases FIC 84 48 (2) 25'' rectangular bases FJC FJD 90 90 48 54 (2) 25'' rectangular bases FKC FKD FKE 96 96 96 48 54 60 (2) 25'' rectangular bases FLC FLD FLE 102 102 102 48 54 60 (2) 25'' rectangular bases FMC FMD FME 108 108 108 48 54 60 (2) 25'' rectangular bases FNC FND FNE 114 114 114 48 54 60 (2) 25'' rectangular bases FOC FOD FOE 120 120 120 48 54 60 (2) 25'' rectangular bases FQC FQD FQE FQF FQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 00/13 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1603 1747 $ 1683 1835 $ 2231 2301 $ 2610 2692 $ 2588 2669 $ 2967 3060 1545 1704 1863 1622 1789 1956 2218 2294 2371 2595 2684 2774 2573 2661 2750 2950 3051 3153 1979 2078 2445 2861 2837 3252 2094 2199 2509 2936 2910 3337 2210 2321 2966 3470 3440 3944 2326 2542 2442 2669 3290 3416 3849 3997 3816 3963 4375 4543 2441 2673 2903 2563 2806 3048 3373 3507 3642 3947 4103 4261 3913 4068 4225 4486 4664 4844 2834 3079 3325 2976 3233 3491 3740 3883 4024 4376 4543 4708 4338 4504 4668 4974 5164 5352 2949 3210 3470 3097 3370 3642 3831 3981 4131 4482 4658 4833 4444 4618 4792 5095 5295 5494 3065 3339 3615 3218 3506 3795 3922 4079 4237 4589 4773 4958 4550 4732 4915 5216 5425 5636 3181 3470 3759 3340 3643 3946 4012 4178 4322 4694 4888 5057 4654 4846 5013 5336 5557 5748 3622 3941 4258 4577 4894 3804 4138 4471 4805 5139 4745 4930 5116 5301 5487 5551 5768 5985 6203 6420 5504 5719 5934 6150 6365 6310 6557 6804 7051 7298 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish see appendix grommet placement W 7 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified radius rectangular top specification codes sku l w FSD FSE FSF FSG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FUD FUE FUF FUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FWD FWE FWF FWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FYD FYE FYF FYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases F1D F1E F1F F1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F3D F3E F3F F3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F5D F5E F5F F5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F7D F7E F7F F7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases F9D F9E F9F F9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 00/13 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F anigre A E A E F N F N R S R S plain abstract woodgrain $ 4200 $ 4410 $ 5144 $ 6019 $ 5967 $ 6842 4460 4837 5459 5835 4683 5079 5732 6127 5322 5537 6212 6427 6227 6479 7268 7519 6174 6423 7205 7455 7078 7365 8261 8548 4998 5402 6053 6459 5248 5672 6356 6782 5776 6007 6730 6960 6758 7029 7874 8144 6700 6969 7807 8074 7682 7990 8951 9257 5258 5691 6372 6806 5521 5976 6690 7146 5954 6199 7020 7267 6966 7253 8213 8502 6906 7191 8143 8429 7918 8245 9336 9665 5518 5981 6803 7266 5793 6280 7144 7629 6190 6451 7430 7692 7242 7548 8694 8999 7180 7483 8619 8922 8232 8580 9882 10230 5778 6270 7144 7636 6067 6583 7501 8017 6367 6643 7679 7955 7450 7772 8984 9308 7386 7706 8907 9228 8469 8835 10212 10580 6038 6559 7484 8005 6340 6886 7858 8405 6544 6835 7956 8247 7657 7997 9309 9649 7591 7929 9229 9567 8704 9091 10582 10969 6576 7125 8102 8651 6905 7481 8507 9084 6999 7305 8515 8822 8189 8547 9963 10321 8119 8474 9878 10233 9308 9716 11325 11733 6835 7414 8443 9020 7177 7785 8865 9471 7177 7497 8800 9120 8397 8772 10296 10671 8325 8697 10208 10579 9545 9971 11704 12130 4547 5141 5488 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4774 5398 5762 5345 5962 6163 base W odeon base 6254 6976 7211 6200 6916 7149 finish see appendix 7109 7930 8197 grommet placement W 8 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified sku arched top specification codes w specifications GGC 72 48/42 (2) 25'' rectangular bases GHC 78 48/42 (2) 25'' rectangular bases GIC 84 48/42 (2) 25'' rectangular bases GJC GJD 90 48/42 90 54/48 (2) 25'' rectangular bases GKC GKD GKE 96 48/42 96 54/48 96 60/54 (2) 25'' rectangular bases GLC GLD GLE 102 48/42 102 54/48 102 60/54 (2) 25'' rectangular bases GMC GMD GME 108 48/42 108 54/48 108 60/54 (2) 25'' rectangular bases GNC GND GNE 114 48/42 114 54/48 114 60/54 (2) 25'' rectangular bases GOC GOD GOE GOF GOG 120 120 120 120 120 (2) 25'' rectangular bases series Q top Q 00/13 l 48/42 54/48 60/54 66/60 72/66 sku (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre F plain abstract woodgrain anigre A E A E F N F N R S R S edge group A edge group B edge group A edge group B $ 2036 $ 2138 $ 3080 $ 3604 $ 3573 $ 4096 2155 2263 3161 3699 3667 4204 2276 2390 3238 3789 3756 4307 2397 2622 2517 2753 3315 3442 3878 4028 3845 3993 4409 4578 2517 2758 2999 2643 2896 3149 3398 3535 3670 3976 4135 4293 3942 4100 4257 4520 4701 4881 2914 3170 3426 3060 3329 3597 3767 3910 4053 4408 4575 4742 4370 4536 4701 5011 5200 5390 3035 3305 3576 3187 3470 3755 3858 4009 4159 4514 4690 4866 4476 4650 4825 5132 5332 5532 3155 3441 3727 3312 3613 3913 3950 4108 4267 4621 4806 4992 4582 4765 4950 5253 5463 5675 3275 3576 3877 4389 4690 3439 3755 4071 4608 4924 4042 4208 4353 5079 5250 4729 4923 5093 5943 6142 4689 4881 5049 5892 6090 5376 5596 5789 6756 6982 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped base W odeon base finish see appendix grommet placement W 9 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified, GREENGUARDCertified arched top specification codes A E A E F N F N R S R S plain abstract woodgrain $ 3727 $ 3913 $ 4775 $ 5587 $ 5539 $ 6351 144 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 144 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 144 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4328 4690 5298 4545 4924 5563 5177 5378 5996 6057 6292 7016 6006 6239 6956 6886 7153 7975 GUD GUE GUF 156 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 156 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 156 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4600 4991 5629 4830 5240 5910 5356 5573 6247 6267 6520 7309 6213 6464 7246 7124 7411 8308 GWD GWE GWF 168 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 168 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 168 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 5148 5568 6237 5405 5847 6549 5812 6042 6766 6800 7070 7916 6742 7009 7849 7730 8036 8999 GYD GYE GYF 180 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 180 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 180 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 5418 5869 6567 5689 6162 6896 5991 6237 7058 7009 7297 8258 6949 7235 8187 7968 8295 9387 G1D G1E G1F 192 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 192 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 192 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5689 6171 7012 5973 6479 7363 6228 6489 7471 7287 7593 8741 7225 7528 8666 8283 8631 9936 G3D G3E G3F 204 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 204 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 204 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5960 6472 7366 6258 6725 7734 6407 6684 7720 7496 7820 9033 7432 7753 8956 8521 8889 10268 G5D G5E GXF 216 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 216 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 216 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 6230 6773 7719 6542 7111 8105 6586 6877 7999 7706 8046 9359 7640 7977 9279 8759 9146 10639 G7D G7E G7F 228 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 6778 7350 8349 7117 7718 8767 7042 7348 8559 8239 8597 10014 8168 8524 9929 9365 9773 11384 G9D G9E G9F 240 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 7049 7651 8703 7402 8034 9138 7221 7542 8445 8448 8825 10348 8376 8749 10260 9603 10031 11763 sku l w GQC GQD GQE GQF 132 132 132 132 48/36 54/42 60/54 66/54 GSD GSE GSF series Q top Q 00/13 F anigre sku specifications 4057 4389 4719 (3) 25'' rectangular bases (3) 25'' rectangular bases (2) 25'' rect. bases, (1) 30'' rect. base (2) 25'' rect. bases, (1) 30'' rect. base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4260 4608 4955 4961 5148 5334 base W odeon base 5804 6023 6241 5755 5971 6188 finish see appendix 6598 6846 7095 grommet placement W 10 ∞≤√ odeon teleconference tops odeon teleconference tables tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G Level1 Certified GREENGUARDCertified sku teleconference top specification codes w specifications IKD IKE 96 54/36 96 60/42 (1) 25'', (1) 30'' rectangular base ILD ILE 102 54/36 102 60/42 (1) 25'', (1) 30'' rectangular base IMD IME 108 54/36 108 60/42 (1) 25'', (1) 30'' rectangular base IOD IOE 120 54/36 120 60/42 (1) 25'', (1) 30'' rectangular base IQD IQE IQF 132 54/36 132 60/42 132 66/48 (2) 25'', (1) 30'' rectangular base ISE ISF 144 60/42 144 66/48 (2) 25'', (1) 30'' rectangular base IUE IUF 156 60/42 156 66/48 (2) 25'', (1) 30'' rectangular base IWE IWF 168 60/42 168 66/48 (2) 25'', (1) 30'' rectangular base IYE IYF 180 60/42 180 66/48 (2) 25'', (1) 30'' rectangular base I1E I1F 192 60/42 192 66/48 (2) 25'', (1) 30'' rectangular base I3F 204 66/48 (1) 25'', (2) 30'' rectangular base series Q top Q 00/13 l sku (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (2) 25'', (1) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base veneer grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre cherry maple oak walnut laminate F anigre A E A E F N F N R S R S plain abstract woodgrain $ 2958 $ 3106 $ 3826 $ 4476 $ 4438 $ 5088 3403 3671 3573 3854 4235 4391 4955 5138 4913 5094 5633 5840 3544 3828 3722 4019 4343 4503 5081 5269 5038 5224 5776 5989 3828 4144 4019 4351 4558 4715 5333 5516 5287 5469 6062 6271 4342 4689 5036 4559 4923 5287 5378 5580 5783 6292 6529 6766 6239 6473 6709 7153 7422 7692 5004 5652 5254 5934 5831 6504 6822 7609 6763 7544 7755 8650 5319 5999 5585 6298 6041 6776 7068 7928 7008 7860 8035 9012 5937 6647 6234 6980 6553 7341 7667 8589 7602 8516 8716 9764 6252 6994 6565 7344 6763 7658 7912 8959 7845 8883 8994 10185 6567 7466 6896 7839 7037 8107 8234 9485 8163 9404 9360 10782 7837 8228 8377 9801 9717 11141 3211 edge laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 3371 3973 base W odeon base 4648 finish see appendix 4608 5284 grommet placement W 11 ∞≤√ odeon mediatracTM MediatracTM Mediatrac™ is a simplified system for routing power and data to the conference table worksurface while managing wires and auxiliary equipment. The Mediatrac™ rail system is standard on most Bernhardt Design conference table tops. This rail system provides the location for mounting bases and installing auxiliary components for wire and equipment management. The rails also provide critical structural integrity to the conference table top allowing for longer spans with greater strength and dimensional stability. Illustration showing MediatracTM grommets Mediatrac™ grommet system provides power and 16 different options of Extron data configurations. Grommets are available in 6 different sizes ranging from an 8” x 4” single door unit to a 96” x 8” double door unit. All units have a polished aluminum trim with options of polished aluminum, laminate or wood veneer doors to match the finish and grain direction of the conference table top. Mediatrac™ grommets are sold and shipped separately and are easily installed from the top of the table. Hardwired and corded power are available. 96'' x 8'' 72'' x 8'' 48'' x 8'' 24'' x 8'' 8'' x 8'' 8'' x 4'' Illustration showing MediatracTM range of available sizes. 00/13 Power and data locations in MediatracTM grommets 12 ∞≤√ odeon mediatracTM MediatracTM Power and Data The power modules for MediatracTM mount in the grommet assembly allowing for ease of installation as well as maximum flexibility when hardwired units are being connected. MediatracTM grommets are available in either corded or hardwired assemblies. Power is provided standard in all skus, however, corded or hardwire must be specified. All assemblies are CSA approved and certified for use in all US cities. Corded units: Two or four 110V / 15 amp grounded outlets with 10 feet of 14 gauge SJT grounded cord. CSA approved. Hardwire units: Two or four 110V / 15 amp grounded outlets with 6 feet of 3/8” black liquid tight conduit with an extra 1 foot of wire exposed at the end of the conduit. CSA approved. All MediatracTM grommets are designed to accept Extron AAP plates. For every location of a power module, there are locations for two single AAP plates. A blank plate will cover both slots when shipped from the factory. Extron AAP’s must be specified separately. If an AAP is specified, it is the responsibility of the user’s technical staff to field install. Note: If a single AAP is all that is required, then specify a C-VGG blank single cover plate to cover the second available slot. MediatracTM Grommet Detail - Power MediatracTM has 8 different categories of data connectors totaling 16 different AAP plates. For special applications, more than 100 different AAP plates are available directly through Extron: http://www.extron.com/company/article.aspx?id=aapmaap Extron AAP Plates One RJ-11 Female Barrel Phone One RJ-45 CAT5e & CAT6 Two RJ-45 CAT5e & CAT6 Two USB A RCA Jacks 15 Pin VGA Stereo Mini Jack When the Cable Pass-Through AAP is specified, the Cable Sling will also need to be ordered to manage the wires under the worksurface. Single Blank Plate Extender 15 Pin VGA Stereo Mini Jack Cable Pass-Through Two RJ-45 CAT5e 00/13 13 ∞≤√ odeon mediatracTM MediatracTM MediatracTM grommets are available in 6 different sizes with either polished aluminum, laminate or wood veneer doors MediatracTM grommets mount between the MediatracTM rail Illustration showing two dfferent sizes of the MediatracTM grommet system Outlet strip Wire management clip - 4 are included with MediatracTM rails Cable sling for use with Extron cable pass-through modules MediatracTM single unit grommet Equipment tray MediatracTM rails - standard on all tops Polished aluminum MediatracTM rail end cap - included on all tops with MediatracTM rails Illustration showing the available accessories for the MediatracTM rail and grommet system 00/13 14 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations Illustration showing Odeon bases configured and wired for the P20 Mediatrac configuration. MediatracTM rail system is standard on all tops Removable laminate or veneer panels 25'' Square Base 30'' Square Base Odeon base with floor monument outside of the base 00/13 15 ∞≤√ odeon mediatracTM MediatracTM MediatracTM equipment tray Assembly showing the MediatracTM equipment tray used to accomodate various types of equipment to support data needs of the table. Location of available power strip Location of possible LAN / Ethernet Switch Boundary microphone location inside of rail Power cord from MediatracTM grommet Location of possible component hub for microphones Assembly showing the MediatracTM equipment tray when used with boundary microphones. This tray can be used to mount microphone hubs and controllers for various electronic components. MediatracTM cable sling Assembly showing the MediatracTM cable sling used in conjunction with the Extron pass-through AAP module. In this configuration the customers’ cables are used. 00/13 16 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon M12 code designates the machining pattern for (2) 24'' MediatracTM grommets, sold separately. Illustration shows the P15 configurations with both the Mediatrac™ and the Polycom™ grommets P12 code designates the machining pattern for (2) 24'' MediatracTM grommets and (3) 1'' Polycom grommets, sold separately. MediatracTM grommets are available with either laminate, polished aluminum or wood veneer doors. When wood veneer doors are specified, the grain of grommet doors will run with the grain direction of the table top. Mediatrac grommets are available in two different configurations coded starting with the letter: M represents the Mediatrac grommet options P represents the combination of Mediatrac grommets and 1” round grommets located for the use of Polycom or similar speakerphone systems. This allows all wiring to be concealed and managed. 54'' - 60'' Square and Round MO1 MO1 MO3 MO3 60'' - 78'' Table 6 Seats 9∑"- 21∑" CENTER 21" 18-24" 21" 21" MO6 MO4-PO4 MO3 MO2-PO2 8-14" 24" MO5 Available on 66'' and 72''Tops 84'' - 90'' Table 6 Seats 33∑-36∑" CENTER 21" MO3 MO4-PO4 MO5-PO5 13-16" 24" 5-8" 21" MO6 02/09 MO7 MO8 48" 24" 21" MO9 Available on 90'' Tops 17 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 96'' - 108'' Table 8 Seats 11-17" 38-50" 21" 21" MO4-PO4 MO5-PO5 MO8 5" 15-21" 48" 21" 24-30" MO9 24" 21" 21" M10 18" 48" 21" M11 Available on 108'' Tops 24" M12-P12 Available on 108'' Tops 114'' - 120'' Table 10 Seats 20-23" 21" 48" 48” 33-36" 21" MO9 MO8 MO4-PO4 8-11" 24-27" 21" 21" M10 M11 24-30" 21" 21-24" M12-P12 72" M13 132'' - 144'' Table 12 Seats 19-23" 21" 21" MO4-PO4 M14-P14 7-10" 5-11" 19-25" 24" M15-P15 96” 72" 21" 24" M16 Available on 144'' Tops M17 156'' - 168'' Table 14 Seats 96” 21" MO4-PO4 27-31" 21" 30-36" M16 M14-P14 5-11" 18-30" 21" M17 00/13 21" M18-P18 48" 21" M19 18 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 180'' - 192'' Table 16 Seats 96” MO4-PO4 M18-P18 M20-P20 M21-P21 M19 204'' - 218'' Table 18 Seats 96” MO4-PO4 M20-P20 M19 M22-P22 M21-P21 M23 228'' - 240'' Table 20 Seats M22-P22 MO4-PO4 M25 M26-P26 96” 96” M24 Available on 240'' Tops 19 ∞≤√ odeon mediatracTM description sku w d h aluminum VAZ 2 grounded outlets, 1 exit plug VAT accepts 2 Extron single space AAP’s polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 4 4 wood/laminate VWZ 2 grounded outlets, 1 exit plug VWT accepts 2 Extron single space AAP’s aluminum frame laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 weight specifications grade 1 grade 2 3∑ 3∑ corded hardwired $ 765 765 - 4 4 3∑ 3∑ corded hardwired 935 935 935 935 aluminum VAY 8 4 grounded outlets, 1 exit plug VAS 8 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 984 984 - wood/laminate VWY 4 grounded outlets, 1 exit plug VWS accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1154 1154 1154 1154 aluminum VAX 24 4 grounded outlets, 1 exit plug VAR 24 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1093 1093 - wood/laminate VWX 4 grounded outlets, 1 exit plug VWR accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1264 1264 1264 1264 grade 3 8'' single door communication grommet - - - 935 935 8'' double door communication grommet 8 8 - - - 1154 1154 24'' door communication grommet specification codes series F conference 00/13 F sku 24 24 veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - - - 1264 1264 finish 6 polished aluminum 6 20 ∞≤√ odeon mediatracTM description sku w d h weight specifications grade 1 grade 2 aluminum VAW 8 grounded outlets, 2 exit plugs VAQ accepts 8 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors $ 1863 1863 - wood/laminate VWW 8 grounded outlets, 2 exit plugs VWQ accepts 8 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors 2088 2088 2088 2088 aluminum VAV 12 grounded outlets, 3 exit plugs VAP accepts 12 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2631 2631 - wood/laminate VWV 12 grounded outlets, 3 exit plugs VWP aluminum frame accepts 12 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2911 2911 2911 2911 aluminum VAU 16 grounded outlets, 4 exit plugs VAO accepts 16 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3439 3439 - wood/laminate VWU 16 grounded outlets, 4 exit plugs VWO accepts 16 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3734 3734 3734 3734 grade 3 48'' door communication grommet - - - 2088 2088 72'' door communication grommet - - - 2911 2911 96'' door communication grommet specification codes series F conference 00/13 F sku veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - - - 3734 3734 finish 6 polished aluminum 6 21 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price phone/data module VGV 3∑ - ∏ $ 123 VGI 3∑ - ∏ 123 VGJ 3∑ - ∏ 133 VGD 3∑ - ∏ 160 - 1Ω 160 133 Extron® AAP one RJ-11 phone barrel female to female black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 HCI CAT 5e female to female barrel black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 female to punch down block leviton CAT5 data single space insert phone/data module Extron® AAP two RJ-45 pass-through barrels CAT 5e single space insert VGF phone/data module 3∑ Extron® AAP two RJ-45 pass-through barrels CAT 5e double space insert phone/data module VGK 3∑ - ∏ VGP 3∑ - ∏ Extron® AAP one RJ-45 female to punch down block leviton CAT6 data single space insert phone/data module 202 Extron® AAP two RJ-45 female to punch down block leviton CAT6 data single space insert specification codes 00/13 series veneer style pull/hardware C accessories sku X none X none X none C X X X finish X X X 22 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price phone/data module VGL 3∑ - ∏ $ 202 VGM 3∑ - ∏ 202 VGN 3∑ - ∏ 202 VGQ 3∑ - 1Ω 288 3∑ - ∏ 202 - ∏ 282 Extron® AAP two RJ-45 female to punch down block AMP CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block seimon CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block ortronics CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block higher than CAT6 data type connectors systomax MGS500 backward compatible double space insert computer/audio/video module VGC Extron® AAP 15HD, F-F, 15 pin HD female to female 3.5mm stereo mini jack to solder tabs with silk screen “COMPUTER” and “AUDIO” single space insert computer/audio/video module VGE 3∑ Extron® Interface AAP 15HD, F-F, 15 pin VGA female to female 3.5mm stereo mini jack female to female silk screen, “COMPUTER” and “AUDIO” single space insert specification codes 00/13 series sku veneer style pull/hardware C accessories X none X none X none C X X X finish X X X 23 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price computer/audio/video module VG2 3∑ - 1∏ $ 202 3∑ - ∏ 217 3∑ - ∏ 320 Extron® AAP 15HD, one DVI-I female to female barrel, single space insert single space insert computer/audio/video module VG3 Extron® AAP HDMI female to HDMI female on 10'' pigtail single space insert computer/audio/video module VG4 Extron® AAP 15-pin HD female to 5 BNC on 8''- 12'' staggered length pigtails 3.5mm stereo mini jack barrel single space insert control/computer module VGX 3∑ - 1∏ 945 Extron® AAP extender with black powdercoat finish VGA line driver with audio, signals up to 250' double space insert control/computer module VGR 3∑ - ∏ 266 VGT 3∑ - ∏ 160 3∑ - ∏ 70 - 1Ω 256 Extron® AAP two USB A female to female barrels single space insert computer/audio/video module Extron® three RCA with black powdercoat finish female to female barrels single space insert VGG blank plate Extron® AAP blank plate with black powdercoat finish single space insert cable pass-through module VGY 3∑ Extron® AAP cable pass-through with black powdercoat finish sold and ordered as 1 set with left and right specify for use with C-VMW cable sling specification codes 00/13 series veneer style pull/hardware C accessories sku X none X none X none C X X X finish X X X 24 ∞≤√ odeon wire management description sku w d h speaker phone grommet VGZ 1 1 1∫ GNC GMT 3 3 3 3 ∆ ∆ VGS 8π 4π 26∫ 2∑ 2∑ 30 weight specifications price $ 56 polished aluminum specify pull/hardware code 6 communication grommet 67 52 specify with table top order field installed die cast zinc polished aluminum fits 2∑'' opening specify pull/hardware code 6 wire management system 217 gray, nylon mesh, 2π’’ diameter zippered wire management cover mounting bracket not designed as table support bracket dimensions: 8π’’w x 4π’’d x 1∂”h cover dimensions: 2π’’w x 2π’’d x 24∆”h specify pull/hardware code X wire management snake VGW 248 black plastic flexible cable management system weighted metal base specify pull/hardware code X specification codes 00/13 series sku veneer style C accessories X none X none C X X pull/hardware finish 6 polished aluminum X none X X X 25 ∞≤√ odeon wire management description sku w d h weight specifications price equipment tray VMZ VMY 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases VMX VMW 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases VNZ 6 2∂ 1π 42 VNY 12∂ 2 1π 326 $ 155 166 silver powdercoat VMZ - use with Odeon 25'' base VMY - use with Odeon 30'' base cable sling 155 166 grey nylon mesh material hooks onto mediatracTM rails specify with Extron pull-through AAP C-VGY wire clip smoke polycarbonate finish 4 included with each table power strip 6 outlet center; 110v 15 amp 15' plug in cord surge protector UL Listed specification codes 00/13 series sku veneer style pull/hardware C accessories X none X none X none C X X X finish X X X 26 ∞≤√ odeon Odeon Concept and Assembly Overview MediatracTM grommet system Top assembly Includes the top and the MediatracTM rail assembly Base Exploded view of the construction concept. Order the MediatracTM grommet system For power and data required at the work surface Order the desired top MediatracTM rail system is pre-installed and included in the price. Order the base design The base will straddle the rails. Exploded side view of table ordering process. 00/13 27 ∞≤√ odeon Odeon Base Location Top Length Top Width Top Overhang Top Overhang Top Edge to Center of Base Base Width Top Overhang Summary for End Conditions Top Overhang Summary for Side Conditions Top Edge to the Center of Base 00/13 Top Length Top Overhang 25''/30'' Rect. 25'' Square 30'' Square Base Width Top Width Top Overhang 72'' 78'' 84'' 90'' 96'' 102'' 108'' 114'' 120'' 132'' 144'' 156'' 168'' 180'' 192'' 204'' 216'' 228'' 240'' 18π'' 18π'' 18π'' 19π'' 19π'' 19π'' 20π'' 20π'' 20π'' 21π'' 21π'' 22π'' 22π'' 22π'' 22π'' 24'' 24'' 25'' 25'' 23π'' 23π'' 23π'' 24π'' 24π'' 24π'' 25π'' 25π'' 25π'' 26π'' 26π'' 27π'' 27π'' 27π'' 27π'' 29'' 29'' 30'' 30'' 31∂'' 31∂'' 31∂'' 32∂'' 32∂'' 32∂'' 33∂'' 33∂'' 33∂'' 34∂'' 34∂'' 35∂'' 35∂'' 35∂'' 35∂'' 36∑'' 36∑'' 37∑'' 37∑'' 33π'' 33π'' 33π'' 34π'' 34π'' 34π'' 35π'' 35π'' 35π'' 36π'' 36π'' 37π'' 37π'' 37π'' 37π'' 39'' 39'' 40'' 40'' 25'' 25'' 30'' 30'' 30'' 48'' 54'' 60'' 66'' 72'' 11∑'' 14∑'' 15'' 18'' 21'' 28 ∞≤√ appendix - finishes Finish Selections A three character sku identifies the finish on each species or the laminate selection. Individual components are priced with standard finish or standard laminate. A variety of standard laminate finishes are available. Additional laminate colors may be available but are subject to upcharges and extended lead times. The laminate option is available on components where noted as an option in the series specification code. Listed are the standard laminates. Special finishes on veneers made to customer specifications are subject to factory approval and a 5% net upcharge with a $500 net minimum. Transparent stains and sealers are applied in multiple steps to enhance the beauty of the natural wood. A durable, baked-on, top-coat of conversion varnish or UV topcoat is applied to protect the product. It is recommended that felt, cork or fabric backed desk pads and accessories are used on worksurfaces to miminize wear. When specifying light finishes such as 836, 837, 840 or 850, the color and characteristic variances of both veneer and solid wood are apparent. Therefore, exact color matches are not possible. Q Anigre Standard Finish 841 805 850 823 834 860 836 861 865 839 840 J Cherry Standard Finish 839 805 834 840 835 841 861 836 E Maple Standard Finish 837 850 C Oak Standard Finish 805 860 836 861 837 865 839 866 840 9 F Plain/Abstract Laminate Standard Plain/Abstract 601 Solid White, Nevamar S-7004T, with Solid White Edge 604 Winter Gray Matrix, Nevamar MR-6005T, with Platinum Edge 605 Straw Matrix, Nevamar MR-2006T, with Platinum Edge 611 Brite White, Formica 459-58, with Designer White Edge 644 Stop Red, Formica 839-58, with Spectrum Red Edge 645 Smoky White, Nevamar S7027T, with Frosty White Edge 646 Cordial Gray, Nevamar S6024T, with Featherstone Edge 660 Folkstone, Formica 927-58, with Fashion Grey Edge 661 Fog, Formica 961-58, with Dove Grey Edge 662 Black, Formica 909-58, with Black Edge 694 Almond, Nevamar S2037T, with Almond Edge 695 Tawny White, Pionite SW812, with Antique White Edge 696 Taupe, Pionite ST606, with Khaki Brown Edge 697 Sandcastle, Nevamar S209T, with Pepperdust Edge W Woodgrain Laminate Standard Woodgrain 670 Gunstock Savoy Walnut, Pionite WW971, with Columbian Walnut Edge 685 Grand Isle Maple, Nevamar W8371T, with African Limba Edge 686 Valencia Teak, Nevamar WT0003PV, with Shadow Oak Edge 687 Sovereign Cherry, Nevamar W8325T, with Wild Cherry Edge 688 Clear Maple, Nevamar WM8340T, with Natural Maple Edge 689 Kingsley, Pionite WW011, with Kingsley Edge 690 Cocoa Maple, Formica 7739-58, with Cocoa Maple Edge 691 Prestige Walnut, Formica 6209-43, with Shadow Oak Edge 692 Select Cherry, Formica 7759-43, with Select Cherry Edge 693 Northern Oak, Formica 7152-58, with Clear Maple Edge Walnut Standard Finish 823 839 841 860 861 866 00/13 29 ∞≤√ guaranteed freight program Preferred Carrier Guaranteed Freight Rates Freight charges will be applied to orders as a separate line item based on the zones listed. The freight amount is calculated on the total merchandise net COM price, excluding any extra discounts beyond standard net pricing. Additional freight fuel surcharges may apply. All orders are shipped by Bernhardt Design company trucks or preferred carriers specified by Bernhardt Design. Rates are based on deliveries made Monday through Friday, 8 a.m. until 5 p.m. Dealer warehouse information, including phone number and contact name, must be specified on the purchase order. Direct site deliveries may be requested with an additional freight cost. Freight rates are based on zones with a minimum for each zone. All zones are within the Continental United States. Note: Average Service Days excludes ship day. Mininum Charge Freight Rate Average Service Days 1 $80 5% 2-4 Business Days 2 $80 6% 2-4 Business Days 3 $90 7% 2-4 Business Days 4 $90 8% 3-5 Business Days 5 $90 9% 5-7 Business Days 6 $110 10% 5-7 Business Days 7 $110 11% 6-9 Business Days 8 $120 12% 7-10 Business Days 9 $120 13% 7-10 Business Days 10 $120 15% 8-12 Business Days Zone 5 10 5 7 5 9 4 3 6 1 2 8 3 7 5 00/13 30 ∞≤√ Prices and Specifications Prices and specifications are subject to change without notice. All prices quoted will be FOBour factories. If applicable, sales tax will be based on ship-to destination. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. Order Entry All orders are subject to final acceptance by Bernhardt Design in Lenoir, NC. Receipt of our acknowledgment indicates acceptance of your order subject to the terms set forth on the acknowledgment. Bernhardt Design attempts to clarify all purchase orders. However, in the event the price list number and description on the purchase order differ, the price list number will prevail. Changes / Cancellation All orders in production are considered firm orders and are not subject to changes or cancellation. Custom Design Bernhardt Design may alter products to meet specific needs. Contact your local sales representative when a custom design is needed. Custom designs require minimum quantities, additional lead time and upcharges. A custom job number, available from your local sales representative, must be submitted with purchase orders. Orders combining custom design with standard product cannot be scheduled for production until custom items are approved. Shipping Bernhardt Design will ship in accordance with customer instructions whenever possible. If not specified, Bernhardt Design will exercise its best judgement in selecting a carrier. Orders in production will be shipped as scheduled and cannot be held. High quality cartoning which meets trucking and railroad specifications is standard at no extra charge. Storage If a customer is unable to accept an order when it is ready for shipment, storage may 00/13 appendix - terms and conditions be requested. Acceptance of storage will be at the discretion of Bernhardt Design. All costs including transportation will be at customer expense. A storage charge of 1∑% of the invoice will be assessed for every 30 days, or any part thereof, that merchandise remains in storage. Bernhardt Design considers transfer to storage the equivalent of delivery. This includes invoicing and payment. Customers will bear all risk of damage or loss during storage. Freight Damage and Claims Bernhardt Design is not liable for damages that occur during transit or storage. The carrier assumes all responsibility upon acceptance of product. It is the customer’s responsibility to inspect all products upon receipt and file any claims with the carrier. No product should be refused. If products are received damaged, a written exception should be made on the bill of lading and an immediate inspection be requested of the carrier. Concealed damage must be reported to the carrier within 15 days of receipt. Failure to make claims shall constitute acceptance of the products and waiver any claims of defects, errors or shortages. In the event delivery is made on a Bernhardt Design truck, the products should be carefully inspected for transit damage. If contents are damaged, the driver should be notified to call his dispatcher for immediate disposition. Concealed damage must be reported within 15 days of receipt and product/packaging held for inspection by a Bernhardt Design representative. Replacements for product damaged in shipment or storage will be manufactured upon receipt of a purchase order. Returns No merchandise may be returned to Bernhardt Design without written consent in the form of a Return Authorization from our Quality Assurance Department stating reason for return and how the item will be shipped. Unauthorized returns will be automatically refused by our receiving department as well as returns not in accordance with Bernhardt Design shipping instructions. Liability for defective merchandise shall be limited to the replacement or repair of that merchandise, and Bernhardt Design shall not be liable for other damages or losses. Measurements and Weights All measurements and weights are approximate and subject to change without notice. Care and Cleaning Finished wood surfaces should be cleaned with a soft damp cloth, wiping in the direction of the grain. Dry with a soft cloth, wiping in the grain direction. Do not use waxes or furniture polish, as these will cause a film build-up. Wood Finishes Bernhardt Design tables are available in standard finishes compatible with casegoods and seating finishes. However, finishes on tables may vary slightly from those on casegoods and seating due to the natural characteristics of the wood. No absolute match is implied or guaranteed. Light Finishes Bernhardt Design offers lighter finishes 836, 837, 840, and 850. Light finishes do not hide or mask the natural characteristics of the wood. It is important that the dealer and customer understand that inherent natural characteristics of the wood will vary from piece to piece when using a light finish. Natural characteristics include the natural discolorations of the wood substance and color variations in glued up stock. These natural characteristics are not considered defects by Bernhardt Design, and therefore merchandise will not be replaced because of these natural characteristics. Special Finishes Special finishes, made to customer specifications and subject to factory approval, may be available at a 5% net upcharge with a $500 net minimum. Additional leadtime may be required for special finish items. Special finish orders will not be acknowledged until the special finish sample is approved in writing and received by Bernhardt Design Customer Service. Special finish orders are not subject to revision or cancellation after acknowledgment. 31 ∞≤√ Warranty Bernhardt Design will repair or replace, at its discretion and without charge to the original purchaser, any table product or part thereof which fails as the result of defects in material and workmanship, under single shift use and normal care, for five years from date of shipment. This warranty does not cover misuse or abuse of product, dramatic temperature changes, exposure to unusual conditions, or damages incurred by contact with seating products. Repair or replacement of discontinued product will be at the discretion of Bernhardt Design. Natural color changes, variations or movements in lumber or veneer products, exposure to extreme temperature changes and direct sunlight may cause color changes and/or surface damage. These are circumstances beyond the control of Bernhardt Design and are not warranty issues. Drawer glides, drawer boxes, drawer pulls, and locking mechanisms have a Life-Time Warranty for the original purchaser. Power or communications components are warranted for one (1) year. This warranty is the customer’s exclusive remedy for product defect and does not apply to damage caused by a carrier, dealer, installer, user modification, or attachments to a product. Bernhardt Design has the exclusive right to make the final determination of product misuse or abuse. Except as stated above, Bernhardt Design makes no express or implied warranties as to any product, and in particular, makes no warranty of merchantability or of fitness for any particular purpose. Bernhardt Design shall not be liable for any consequential or incidental damages or for commercial loss arising from any product defect. The Bernhardt Design customer is the dealer. All complaints must be resolved through the dealer from which the furniture was purchased. To obtain warranty service 00/13 appendix - terms and conditions the dealer must supply dated proof of purchase. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply. Design and Patent Rights All of the products shown in Bernhardt Design catalogs and described in Bernhardt Design price lists are, and remain, the property of Bernhardt Design, with the sole right reserved to manufacture and to distribute. Some of the product designs shown are patented in the United States and will remain the property of Bernhardt Design. Any reproduction of the products constitutes an infringement of patented copyright laws and will be subject to prosecution. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. General Services Administration Products available on the Bernhardt Design GSA - Federal Supply Service Contract GS-28F-7040G are noted in the product descriptions. For information regarding GSA pricing, please contact your local Bernhardt Design sales representative or call 828 759 6337. Send all GSA payments to: 12197 Collections Center Drive Chicago IL 60693 ∞≤√ Bernhardt Design is a registered trademark of Bernhardt Furniture Company of Lenoir, NC. 32
Similar documents
Tables PL 1/2007 - Bernhardt design
top 66'' - 72'' width x 132'' - 240'' length
have 4 sectional veneer matched tops
approved for GSA Contract GS-28F-7040G
Tables PL 1/2007 - Bernhardt design
chain-of-custody certification for conference tables.
For more information on FSC availability and pricing,
please contact [email protected].