Tables PL 1/2007 - Bernhardt design
Transcription
Tables PL 1/2007 - Bernhardt design
∞≤√ odeon price list april 2010 ∞≤√ odeon base Odeon Base Rectangular Odeon Base Bottom View Square Odeon Base Clear Opening Dimensions The Odeon conference table features bases of bent plywood with quarter cut maple veneer faces available in both rectangular and square shapes. Bases and tops are specified and sold separately. See the specific top size desired for the appropriate number of bases required. 25'' Rectangular - 18∂'' x 6∑'' 30'' Rectangular - 23∂'' x 6∑'' 25'' Square - 18∑'' x 21'' 30'' Square - 23∂'' x 26'' Removable Veneer Panel 3Ω'' One side of each base has a removable access panel for easy entry into the base for wire management. Large openings on both the bottom and top provide the largest possible open area for floor monuments. 28∂'' The Odeon base is designed to work with the Mediatrac rail system. When installed, the Odeon base will straddle the rails and provide clear access for the Mediatrac grommet system if specified. 1∂'' 25'' - 30'' The Odeon conference table is GREENGUARD Certified and certificates are available on Bernhardtdesign.com or GREENGUARD.org. Bernhardt Design also offers FSC chain-of-custody certification for conference tables. For more information on FSC availability and pricing, please contact [email protected]. Side View End View 25'' Rectangular - 10'' 30'' Rectangular - 10'' 25'' Square - 25'' 30'' Square - 30'' description sku w d h odeon base ZYU ZYV 25 30 10 10 28∂ 28∂ ZWR ZWS 25 30 25 30 28∂ 28∂ weight specifications laminate veneer $ 1733 $ 1950 2050 2363 2500 2750 1838 rectangular odeon base 2573 square specification codes series W conference W 04/10 sku laminate F plain/abstract laminate W woodgrain laminate veneer J cherry E maple C oak 9 walnut Q anigre style base finish X 6 polished aluminum see appendix X 6 grommet placement 2 ∞≤√ odeon tops Odeon Tops Top ships with Mediatrac rail system pre-installed Top is available with optional Mediatrac grommets 25'' Base - 12∂'' 30'' Base - 17∂'' Odeon bases straddle the Mediatrac rails when installed Odeon tops are specifically constructed to accommodate the Odeon bases. Tops and bases are specified and sold separately. See the specific top size desired for the appropriate number of bases required. Depending on the width of the top specified, the Mediatrac rail placement will either have 12∂” or 17∂” inside clearance. The recommended base sizes must be specified to ensure a proper alignment and fit. All Odeon tops are pre-installed with the Mediatrac rail system as part of their standard construction and are ready to accept any Mediatrac grommet configuration. The Odeon conference table is GREENGUARD Certified and certificates are available on Bernhardtdesign.com or GREENGUARD.org. Bernhardt Design also offers FSC chain-of-custody certification for conference tables. For more information on FSC availability and pricing, please contact [email protected]. Detail view of the Odeon top with the base and the Mediatrac grommet. Laminates - Grade 1 F W Plain/Abstract Laminate Woodgrain Laminate A variety of standard laminate finishes are available with vinyl edge bands specifically formulated to correspond to standard laminates. See finish selections in the appendix for standard laminates and edge bands. Veneer - Grade 2 J Cherry - Flat Cut 9 Walnut - Flat Cut E Maple - Flat Cut Veneer - Grade 3 Q Anigre - Quarter Cut Edge Group B Edge Group A A Block specification codes series Q top Q 04/10 sku C Oak - Rift Cut F Flat E Stepped R Reverse Bevel veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped base W odeon base N Bevel finish S Shaped grommet placement see appendix W 3 ∞≤√ odeon tops cherry maple oak walnut odeon tables laminate tops sold separately order bases separately see mediatracTM for available grommet locations approved for GSA Contract GS-28F-7040G GREENGUARD Certified F square top arched square top radius square top round top specification codes sku l w ADD AEE 54 60 54 60 (1) 25'' square base BDD BEE 54 60 54 60 (1) 25'' square base CDD CEE 54 60 54 60 (1) 25'' square base DDD DEE 54 60 54 60 (1) 25'' square base series Q top Q 04/10 sku specifications (1) 25'' square base (1) 25'' square base (1) 25'' square base (1) 25'' square base anigre A E A E F N F N R S R S plain abstract woodgrain $ 1184 $ 1243 $ 1702 $ 1991 $ 1906 $ 2196 1184 1377 1243 1446 1739 1853 2035 2168 1948 2075 2243 2390 1184 1377 1243 1446 1739 1853 2035 2168 1948 2075 2243 2390 1184 1377 1243 1446 1757 1870 2056 2188 1968 2094 2267 2412 1377 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 1446 1812 base W odeon base 2120 2029 finish 2337 grommet placement see appendix W 4 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified rectangular top specification codes sku l w EGC 72 48 (2) 25'' rectangular bases EHC 78 48 (2) 25'' rectangular bases EIC 84 48 (2) 25'' rectangular bases EJC EJD 90 90 48 54 (2) 25'' rectangular bases EKC EKD EKE 96 96 96 48 54 60 (2) 25'' rectangular bases ELC ELD ELE 102 102 102 48 54 60 (2) 25'' rectangular bases EMC EMD EME 108 108 108 48 54 60 (2) 25'' rectangular bases ENC END ENE 114 114 114 48 54 60 (2) 25'' rectangular bases EOC EOD EOE 120 120 120 48 54 60 (2) 25'' rectangular bases EQC EQD EQE EQF EQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 04/10 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases; 4 piece tops (3) 30'' rectangular bases; 4 piece tops F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1225 $ 1286 $ 1856 $ 2172 $ 2079 $ 2394 1295 1360 1904 2228 2132 2456 1536 1613 2182 2553 2444 2815 1846 2015 1938 2116 2553 2650 2987 3101 2859 2968 3293 3419 1936 2117 2297 2033 2223 2412 2617 2719 2822 3062 3181 3302 2931 3045 3161 3376 3508 3640 2243 2435 2626 2355 2557 2757 2903 3011 3120 3397 3523 3650 3251 3372 3494 3745 3884 4025 2333 2536 2739 2450 2663 2876 2972 3087 3202 3477 3612 3746 3329 3457 3586 3834 3982 4131 2423 2638 2852 2544 2770 2995 3042 3163 3283 3559 3701 3841 3407 3543 3677 3924 4080 4235 2514 2739 2965 2640 2876 3113 3112 3238 3348 3641 3788 3917 3485 3627 3750 4014 4177 4319 2858 3107 3355 3603 3851 3001 3262 3523 3783 4044 3704 3848 3993 4138 4283 4334 4502 4672 4841 5011 4148 4310 4472 4635 4797 4778 4964 5151 5338 5525 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish grommet placement see appendix W 5 ∞≤√ odeon rectangular tops cherry maple oak walnut odeon rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified rectangular top specification codes sku l w ESD ESE ESF ESG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EUD EUE EUF EUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EWD EWE EWF EWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases EYD EYE EYF EYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases E1D E1E E1F E1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E3D E3E E3F E3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E5D E5E E5F E5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases E7D E7E E7F E7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases E9D E9E E9F E9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 04/10 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases F anigre A E A E F N F N R S R S plain abstract woodgrain $ 3310 $ 3476 $ 4016 $ 4699 $ 4498 $ 5181 3513 3806 4292 4586 3689 3996 4507 4815 4154 4323 4848 5017 4860 5058 5672 5870 4652 4842 5430 5619 5359 5577 6254 6472 3932 4248 4757 5073 4129 4460 4995 5327 4509 4689 5253 5433 5276 5486 6146 6347 5050 5252 5883 6085 5817 6049 6776 7009 4135 4474 5005 5343 4342 4698 5255 5610 4647 4839 5480 5673 5437 5662 6412 6637 5205 5420 6138 6354 5995 6242 7069 7318 4338 4699 5342 5703 4555 4934 5609 5988 4832 5036 5801 6004 5653 5892 6787 7025 5412 5640 6497 6724 6233 6496 7483 7745 4541 4925 5608 5991 4768 5171 5888 6291 4970 5186 5994 6210 5815 6068 7013 7266 5566 5808 6713 6955 6411 6690 7732 8011 4745 5151 5873 6280 4982 5409 6167 6594 5109 5336 6211 6438 5978 6243 7267 7532 5722 5976 6956 7211 6591 6883 8012 8305 5164 5593 6355 6784 5422 5873 6673 7123 5464 5703 6647 6886 6393 6673 7777 8057 6120 6387 7445 7712 7049 7357 8575 8883 5367 5818 6621 7072 5635 6109 6952 7426 5602 5853 6869 7120 6554 6848 8037 8330 6274 6555 7693 7974 7227 7550 8861 9185 3581 4044 4315 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 3760 4246 4531 4172 4654 4811 base W odeon base 4881 5445 5629 finish 4673 5212 5388 5382 6004 6206 grommet placement see appendix W 6 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified radius rectangular top specification codes sku l w FEC 60 48 (2) 25'' rectangular bases FFC 66 48 (2) 25'' rectangular bases FGC 72 48 (2) 25'' rectangular bases FHC 78 48 (2) 25'' rectangular bases FIC 84 48 (2) 25'' rectangular bases FJC FJD 90 90 48 54 (2) 25'' rectangular bases FKC FKD FKE 96 96 96 48 54 60 (2) 25'' rectangular bases FLC FLD FLE 102 102 102 48 54 60 (2) 25'' rectangular bases FMC FMD FME 108 108 108 48 54 60 (2) 25'' rectangular bases FNC FND FNE 114 114 114 48 54 60 (2) 25'' rectangular bases FOC FOD FOE 120 120 120 48 54 60 (2) 25'' rectangular bases FQC FQD FQE FQF FQG 132 132 132 132 132 48 54 60 66 72 (3) 25'' rectangular bases series Q top Q 04/10 sku specifications (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases (3) 30'' rectangular bases F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1591 $ 1671 $ 2096 $ 2452 $ 2347 $ 2703 1697 1781 2159 2526 2418 2785 1802 1892 2227 2606 2494 2873 1907 2002 2285 2673 2559 2948 2013 2114 2701 3160 3025 3484 2118 2315 2224 2431 2996 3111 3505 3640 3356 3484 3865 4013 2223 2434 2644 2334 2556 2776 3072 3194 3317 3594 3737 3881 3441 3577 3715 3963 4120 4279 2581 2804 3028 2710 2944 3179 3406 3536 3665 3985 4137 4288 3815 3960 4105 4394 4561 4728 2686 2923 3160 2820 3069 3318 3489 3626 3762 4082 4242 4402 3908 4061 4213 4501 4678 4853 2791 3041 3292 2931 3193 3457 3572 3715 3859 4179 4347 4515 4001 4161 4322 4608 4792 4978 2897 3160 3423 3042 3318 3594 3654 3805 3936 4275 4452 4605 4092 4262 4408 4714 4908 5077 3299 3589 3878 4168 4457 3464 3768 4072 4376 4680 4321 4490 4659 4828 4997 5056 5253 5451 5649 5846 4840 5029 5218 5407 5597 5574 5792 6010 6228 6446 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish grommet placement see appendix W 7 ∞≤√ odeon radius rectangular tops cherry maple oak walnut odeon radius rectangular tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified radius rectangular top specification codes sku l w FSD FSE FSF FSG 144 144 144 144 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FUD FUE FUF FUG 156 156 156 156 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FWD FWE FWF FWG 168 168 168 168 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases FYD FYE FYF FYG 180 180 180 180 54 60 66 72 (3) 25'' rect. bases or (2) 25'' sq. bases F1D F1E F1F F1G 192 192 192 192 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F3D F3E F3F F3G 204 204 204 204 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F5D F5E F5F F5G 216 216 216 216 54 60 66 72 (3) 25'' rect. bases or (3) 25'' sq. bases F7D F7E F7F F7G 228 228 228 228 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases F9D F9E F9F F9G 240 240 240 240 54 60 66 72 (4) 25'' rect. bases or (3) 25'' sq. bases series Q top Q 04/10 sku specifications (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (2) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (3) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases (4) 30'' rect. bases or (3) 30'' sq. bases F anigre A E A E F N F N R S R S plain abstract woodgrain $ 3825 $ 4016 $ 4685 $ 5481 $ 5247 $ 6044 4062 4405 4972 5314 4265 4625 5221 5580 4847 5043 5657 5853 5671 5900 6619 6848 5429 5648 6336 6555 6253 6505 7298 7550 4552 4920 5513 5882 4780 5166 5789 6176 5260 5471 6129 6339 6154 6401 7171 7417 5891 6128 6864 7100 6785 7058 7906 8177 4789 5183 5803 6198 5028 5442 6093 6508 5422 5646 6393 6618 6344 6606 7480 7743 6073 6324 7160 7412 6994 7283 8247 8537 5025 5447 6196 6617 5276 5719 6506 6948 5637 5875 6767 7005 6595 6874 7917 8196 6313 6580 7579 7846 7272 7579 8729 9036 5262 5710 6506 6954 5525 5996 6831 7302 5799 6050 6993 7245 6785 7079 8182 8477 6495 6776 7832 8114 7481 7805 9021 9346 5499 5973 6816 7290 5774 6272 7157 7655 5960 6225 7246 7511 6973 7283 8478 8788 6675 6972 8116 8412 7688 8030 9347 9689 5989 6489 7379 7879 6288 6813 7748 8273 6374 6653 7755 8034 7458 7784 9073 9400 7139 7451 8686 8998 8222 8582 10004 10364 6225 6752 7689 8215 6536 7090 8073 8626 6536 6828 8014 8306 7647 7989 9376 9718 7320 7647 8976 9303 8431 8808 10338 10715 4141 4682 4998 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 4348 4916 5248 4868 5430 5613 base W odeon base 5696 6353 6567 finish 5452 6082 6287 6280 7005 7241 grommet placement see appendix W 8 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified sku arched top specification codes w specifications GGC 72 48/42 (2) 25'' rectangular bases GHC 78 48/42 (2) 25'' rectangular bases GIC 84 48/42 (2) 25'' rectangular bases GJC GJD 90 48/42 90 54/48 (2) 25'' rectangular bases GKC GKD GKE 96 48/42 96 54/48 96 60/54 (2) 25'' rectangular bases GLC GLD GLE 102 48/42 102 54/48 102 60/54 (2) 25'' rectangular bases GMC GMD GME 108 48/42 108 54/48 108 60/54 (2) 25'' rectangular bases GNC GND GNE 114 48/42 114 54/48 114 60/54 (2) 25'' rectangular bases GOC GOD GOE GOF GOG 120 120 120 120 120 48/42 54/48 60/54 66/60 72/66 (2) 25'' rectangular bases GQC GQD GQE GQF 132 132 132 132 48/36 54/42 60/54 66/54 (3) 25'' rectangular bases series Q top Q 04/10 l sku (2) 25'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 25'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases (2) 30'' rectangular bases (3) 25'' rectangular bases (2) 25'' rect. bases, (1) 30'' rect. base (2) 25'' rect. bases, (1) 30'' rect. base F anigre A E A E F N F N R S R S plain abstract woodgrain $ 1854 $ 1947 $ 2805 $ 3282 $ 3142 $ 3618 1963 2061 2879 3368 3224 3714 2073 2177 2949 3450 3303 3804 2183 2388 2292 2507 3019 3135 3532 3668 3381 3511 3895 4044 2292 2512 2731 2407 2638 2868 3095 3219 3342 3621 3766 3910 3466 3605 3743 3993 4153 4311 2654 2887 3120 2787 3031 3276 3431 3561 3691 4014 4166 4318 3843 3988 4134 4426 4594 4761 2764 3010 3257 2902 3161 3420 3514 3651 3788 4111 4272 4432 3936 4089 4243 4533 4710 4887 2873 3134 3394 3017 3291 3564 3597 3741 3886 4208 4377 4547 4029 4190 4352 4640 4826 5013 2983 3257 3531 3997 4271 3132 3420 3708 4197 4485 3681 3832 3964 4626 4781 4307 4483 4638 5412 5594 4123 4292 4440 5181 5355 4748 4943 5114 5968 6167 3394 3695 3997 4298 3564 3880 4197 4513 4349 4518 4688 4858 5088 5286 5485 5684 4871 5060 5251 5441 5610 5828 6048 6267 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B base W odeon base finish grommet placement see appendix W 9 ∞≤√ odeon arched tops cherry maple oak walnut odeon arched tables laminate tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified sku arched top specification codes w specifications plain abstract woodgrain A E A E F N F N R S R S edge group A edge group B edge group A edge group B GSD GSE GSF 144 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases $ 3942 144 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4271 144 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4825 $ 4139 $ 4715 $ 5517 $ 5281 $ 6082 GUD GUE GUF 156 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 156 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 156 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4189 4545 5126 4398 4772 5382 4878 5075 5689 5707 5938 6656 5463 5684 6372 6293 6547 7339 GWD GWE GWF 168 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 168 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 168 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4688 5071 5680 4922 5325 5964 5293 5503 6162 6193 6439 7210 5928 6163 6901 6828 7099 7949 GYD GYE GYF 180 54/42 (3) 25'' rect. bases or (2) 25'' sq. bases 180 60/48 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 180 66/54 (2) 25'', (1) 30'' rect. base or (2) 30'' sq. base 4934 5345 5981 5181 5612 6280 5456 5680 6428 6384 6646 7521 6111 6362 7199 7038 7327 8292 G1D G1E G1F 192 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 192 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 192 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5181 5620 6386 5440 5901 6705 5672 5910 6804 6636 6915 7961 6353 6619 7620 7317 7624 8777 G3D G3E G3F 204 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 204 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 204 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5428 5894 6708 5699 6189 7043 5835 6087 7031 6827 7122 8226 6535 6817 7875 7527 7852 9070 G5D G5E GXF 216 54/42 (3) 25'' rect. bases or (3) 25'' sq. bases 216 60/48 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 216 66/54 (2) 25'', (1) 30'' rect. base or (3) 30'' sq. base 5674 6168 7030 5958 6476 7382 5998 6263 7285 7018 7328 8523 6718 7015 8159 7737 8079 9398 G7D G7E G7F 228 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 228 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 6173 6694 7604 6482 7029 7984 6413 6692 7795 7503 7830 9120 7183 7495 8730 8273 8633 10056 G9D G9E G9F 240 54/42 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 60/48 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 240 66/54 (2) 25'', (2) 30'' rect. base or (3) 30'' sq. base 6420 6968 7926 6741 7316 8322 6576 6869 8055 7624 8037 9424 7365 7693 9022 8483 8861 10391 series Q top Q 04/10 l F anigre sku veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped 4485 5066 4898 5461 base W odeon base 5731 6389 finish 5486 6116 6318 7045 grommet placement see appendix W 10 ∞≤√ odeon teleconference tops odeon teleconference tables tops sold separately; order base(s) separately see mediatracTM for available grommet locations top 66'' - 72'' width x 132'' - 240'' length have 4 sectional veneer matched tops approved for GSA Contract GS-28F-7040G GREENGUARD Certified cherry maple oak walnut laminate F sku teleconference top specification codes w specifications IKD IKE 96 54/36 96 60/42 (1) 25'', (1) 30'' rectangular base ILD ILE 102 54/36 102 60/42 (1) 25'', (1) 30'' rectangular base IMD IME 108 54/36 108 60/42 (1) 25'', (1) 30'' rectangular base IOD IOE 120 54/36 120 60/42 (1) 25'', (1) 30'' rectangular base IQD IQE IQF 132 54/36 132 60/42 132 66/48 (2) 25'', (1) 30'' rectangular base ISE ISF 144 60/42 144 66/48 (2) 25'', (1) 30'' rectangular base IUE IUF 156 60/42 156 66/48 (2) 25'', (1) 30'' rectangular base IWE IWF 168 60/42 168 66/48 (2) 25'', (1) 30'' rectangular base IYE IYF 180 60/42 180 66/48 (2) 25'', (1) 30'' rectangular base I1E I1F 192 60/42 192 66/48 (2) 25'', (1) 30'' rectangular base 13F 204 66/48 (1) 25'', (2) 30'' rectangular base series Q top Q 04/10 l sku (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (1) 25'', (1) 30'' rectangular base (2) 25'', (1) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base (1) 25'', (2) 30'' rectangular base anigre A E A E F N F N R S R S plain abstract woodgrain $ 2694 $ 2829 $ 3484 $ 4076 $ 3902 $ 4494 3099 3343 3254 3510 3857 3999 4513 4679 4320 4479 4976 5159 3228 3486 3389 3660 3955 4101 4627 4798 4430 4593 5102 5290 3486 3774 3660 3963 4151 4294 4857 5024 4649 4809 5355 5539 3954 4270 4586 4152 4484 4815 4898 5082 5267 5731 5946 6162 5486 5692 5899 6318 6556 6794 4557 5147 4785 5404 5310 5923 6213 6930 5947 6634 6850 7641 4844 5463 5086 5736 5502 6171 6437 7220 6162 6912 7098 7961 5407 6054 5677 6357 5968 6686 6983 7823 6684 7488 7699 8625 5694 6370 5979 6689 6159 6974 7206 8160 6898 7811 7945 8996 5981 6799 6280 7139 6409 7383 7499 8638 7178 8269 8268 9524 7137 7494 7629 8926 8544 9841 2924 veneer edge grade 1 F plain/abstract laminate W woodgrain laminate grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre laminate F 1∂'' flat group A A 1π'' block F 1∂'' flat R 1∂'' reverse bevel group B E 1∆'' stepped N 1∂'' bevel S 1∂'' shaped edge group A edge group B edge group A edge group B 3070 3618 base W odeon base 4233 finish 4052 4667 grommet placement see appendix W 11 ∞≤√ odeon mediatracTM MediatracTM Mediatrac™ is a simplified system for routing power and data to the conference table worksurface while managing wires and auxiliary equipment. The Mediatrac™ rail system is standard on most Bernhardt Design conference table tops. This rail system provides the location for mounting bases and installing auxiliary components for wire and equipment management. The rails also provide critical structural integrity to the conference table top allowing for longer spans with greater strength and dimensional stability. Illustration showing MediatracTM grommets Mediatrac™ grommet system provides power and 16 different options of Extron data configurations. Grommets are available in 6 different sizes ranging from an 8” x 4” single door unit to a 96” x 8” double door unit. All units have a polished aluminum trim with options of polished aluminum, laminate or wood veneer doors to match the finish and grain direction of the conference table top. Mediatrac™ grommets are sold and shipped separately and are easily installed from the top of the table. Hardwired and corded power are available. 96'' x 8'' 72'' x 8'' 48'' x 8'' 24'' x 8'' 8'' x 8'' 8'' x 4'' Illustration showing MediatracTM range of available sizes. 04/10 Power and data locations in MediatracTM grommets 12 ∞≤√ odeon mediatracTM MediatracTM Power and Data The power modules for MediatracTM mount in the grommet assembly allowing for ease of installation as well as maximum flexibility when hardwired units are being connected. MediatracTM grommets are available in either corded or hardwired assemblies. Power is provided standard in all skus, however, corded or hardwire must be specified. All assemblies are CSA approved and certified for use in all US cities. Corded units: Two or four 110V / 15 amp grounded outlets with 10 feet of 14 gauge SJT grounded cord. CSA approved. Hardwire units: Two or four 110V / 15 amp grounded outlets with 6 feet of 3/8” black liquid tight conduit with an extra 1 foot of wire exposed at the end of the conduit. CSA approved. All MediatracTM grommets are designed to accept Extron AAP plates. For every location of a power module, there are locations for two single AAP plates. A blank plate will cover both slots when shipped from the factory. Extron AAP’s must be specified separately. If an AAP is specified, it is the responsibility of the user’s technical staff to field install. Note: If a single AAP is all that is required, then specify a C-VGG blank single cover plate to cover the second available slot. MediatracTM Grommet Detail - Power MediatracTM has 8 different categories of data connectors totaling 16 different AAP plates. For special applications, more than 100 different AAP plates are available directly through Extron: http://www.extron.com/company/article.aspx?id=aapmaap Extron AAP Plates One RJ-11 Female Barrel Phone One RJ-45 CAT5e & CAT6 Two RJ-45 CAT5e & CAT6 Two USB A RCA Jacks 15 Pin VGA Stereo Mini Jack When the Cable Pass-Through AAP is specified, the Cable Sling will also need to be ordered to manage the wires under the worksurface. Single Blank Plate Extender 15 Pin VGA Stereo Mini Jack Cable Pass-Through Two RJ-45 CAT5e 04/10 13 ∞≤√ odeon mediatracTM MediatracTM MediatracTM grommets are available in 6 different sizes with either polished aluminum, laminate or wood veneer doors MediatracTM grommets mount between the MediatracTM rail Illustration showing two dfferent sizes of the MediatracTM grommet system Outlet strip Wire management clip - 4 are included with MediatracTM rails Cable sling for use with Extron cable pass-through modules MediatracTM single unit grommet Equipment tray MediatracTM rails - standard on all tops Polished aluminum MediatracTM rail end cap - included on all tops with MediatracTM rails Illustration showing the available accessories for the MediatracTM rail and grommet system 04/10 14 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations Illustration showing Odeon bases configured and wired for the P20 Mediatrac configuration. MediatracTM rail system is standard on all tops Removable laminate or veneer panels 25'' Square Base 30'' Square Base Odeon base with floor monument outside of the base 04/10 15 ∞≤√ odeon mediatracTM MediatracTM MediatracTM equipment tray Assembly showing the MediatracTM equipment tray used to accomodate various types of equipment to support data needs of the table. Location of available power strip Location of possible LAN / Ethernet Switch Boundary microphone location inside of rail Power cord from MediatracTM grommet Location of possible component hub for microphones Assembly showing the MediatracTM equipment tray when used with boundary microphones. This tray can be used to mount microphone hubs and controllers for various electronic components. MediatracTM cable sling Assembly showing the MediatracTM cable sling used in conjunction with the Extron pass-through AAP module. In this configuration the customers’ cables are used. 04/10 16 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon M12 code designates the machining pattern for (2) 24'' MediatracTM grommets, sold separately. Illustration shows the P15 configurations with both the Mediatrac™ and the Polycom™ grommets P12 code designates the machining pattern for (2) 24'' MediatracTM grommets and (3) 1'' Polycom grommets, sold separately. MediatracTM grommets are available with either laminate, polished aluminum or wood veneer doors. When wood veneer doors are specified, the grain of grommet doors will run with the grain direction of the table top. Mediatrac grommets are available in two different configurations coded starting with the letter: M represents the Mediatrac grommet options P represents the combination of Mediatrac grommets and 1” round grommets located for the use of Polycom or similar speakerphone systems. This allows all wiring to be concealed and managed. 54'' - 60'' Square and Round MO1 MO1 MO3 MO3 60'' - 72'' Table 6 Seats 9∑"- 21∑" CENTER 21" 18-24" 21" 21" MO6 MO4-PO4 MO3 MO2-PO2 8-14" 24" MO5 Available on 66'' and 72''Tops 84'' - 90'' Table 6 Seats 33∑-36∑" CENTER 21" MO3 MO4-PO4 MO5-PO5 13-16" 24" 5-8" 21" MO6 02/09 MO7 MO8 48" 24" 21" MO9 Available on 90'' Tops 17 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 96'' - 108'' Table 8 Seats 11-17" 38-50" 21" 21" MO4-PO4 MO5-PO5 MO8 5" 15-21" 48" 21" 24-30" MO9 24" 21" 21" M10 18" 48" 21" M11 Available on 108'' Tops 24" M12-P12 Available on 108'' Tops 114'' - 120'' Table 10 Seats 20-23" 21" 48" 48” 33-36" 21" MO9 MO8 MO4-PO4 8-11" 24-27" 21" 21" M10 M11 24-30" 21" 21-24" M12-P12 72" M13 132'' - 144'' Table 12 Seats 19-23" 21" 21" MO4-PO4 M14-P14 7-10" 5-11" 19-25" 24" M15-P15 96” 72" 21" 24" M16 Available on 144'' Tops M17 156'' - 168'' Table 14 Seats 96” 21" MO4-PO4 27-31" 21" 30-36" M16 M14-P14 5-11" 18-30" 21" M17 04/10 21" M18-P18 48" 21" M19 18 ∞≤√ odeon mediatracTM MediatracTM Grommet Configurations for Odeon 180'' - 192'' Table 16 Seats 96” MO4-PO4 M18-P18 M20-P20 M21-P21 M19 204'' - 218'' Table 18 Seats 96” MO4-PO4 M20-P20 M19 M22-P22 M21-P21 M23 228'' - 240'' Table 20 Seats M22-P22 MO4-PO4 M25 M26-P26 96” 96” M24 Available on 240'' Tops 19 ∞≤√ odeon mediatracTM description sku w d h aluminum VAZ 2 grounded outlets, 1 exit plug VAT accepts 2 Extron single space AAP’s polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 4 4 wood/laminate VWZ 2 grounded outlets, 1 exit plug VWT accepts 2 Extron single space AAP’s aluminum frame laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 weight specifications grade 1 3∑ 3∑ corded hardwired $ 695 695 4 4 3∑ 3∑ corded hardwired 850 850 aluminum VAY 8 4 grounded outlets, 1 exit plug VAS 8 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 895 895 wood/laminate VWY 4 grounded outlets, 1 exit plug VWS accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1050 1050 aluminum VAX 24 4 grounded outlets, 1 exit plug VAR 24 accepts 4 Extron single space AAP’s polished aluminum, use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 995 995 wood/laminate VWX 4 grounded outlets, 1 exit plug VWR accepts 4 Extron single space AAP’s aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 8 8 3∑ 3∑ corded; 2 doors hardwired; 2 doors 1150 1150 grade 2 grade 3 8'' single door communication grommet - - 850 850 - - 850 850 8'' double door communication grommet 8 8 - - 1050 1050 - - 1050 1050 24'' door communication grommet specification codes series F conference 04/10 F sku 24 24 veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - - 1150 1150 finish - - 1150 1150 grommet 6 polished aluminum X 6 X none 20 ∞≤√ odeon mediatracTM description sku w d h weight specifications grade 1 grade 2 aluminum VAW 8 grounded outlets, 2 exit plugs VAQ accepts 8 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors $ 1695 1695 wood/laminate VWW 8 grounded outlets, 2 exit plugs VWQ accepts 8 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 48 48 8 8 3∑ 3∑ corded; 4 doors hardwired; 4 doors 1900 1900 aluminum VAV 12 grounded outlets, 3 exit plugs VAP accepts 12 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2395 2395 - wood/laminate VWV 12 grounded outlets, 3 exit plugs VWP aluminum frame accepts 12 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 72 72 8 8 3∑ 3∑ corded; 6 doors hardwired; 6 doors 2650 2650 2650 2650 aluminum VAU 16 grounded outlets, 4 exit plugs VAO accepts 16 Extron single space AAPs polished aluminum use with laminate or veneer tops specify grommet location when ordering top specify veneer code X 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3095 3095 - wood/laminate VWU 16 grounded outlets, 4 exit plugs VWO accepts 16 Extron single space AAPs aluminum frame with laminate or veneer doors specify grommet location when ordering top specify veneer and finish codes 96 96 8 8 3∑ 3∑ corded; 8 doors hardwired; 8 doors 3400 3400 3400 3400 grade 3 48'' door communication grommet - - 1900 1900 - - 1900 1900 72'' door communication grommet - - - 2650 2650 96'' door communication grommet specification codes series F conference 04/10 F sku veneer style grade 1 X none F plain/abstract laminate W woodgrain laminate X polished aluminum grade 2 J cherry E maple C oak 9 walnut grade 3 Q anigre X pull/hardware - finish - - 3400 3400 grommet 6 polished aluminum X 6 X none 21 ∞≤√ odeon extron AAP modules description sku w d h weight specifications price phone/data module VGV 3∑ - ∏ $ 115 VGI 3∑ - ∏ 115 VGJ 3∑ - ∏ 125 VGD 3∑ - ∏ 135 - 1Ω 135 - ∏ 125 Extron® AAP one RJ-11 phone barrel female to female black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 HCI CAT 5e female to female barrel black powdercoat finish single space insert phone/data module Extron® AAP one RJ-45 female to punch down block leviton CAT5 data single space insert phone/data module Extron® AAP two RJ-45 pass-through barrels CAT 6 single space insert VGF phone/data module 3∑ Extron® AAP two RJ-45 pass-through barrels CAT 5e double space insert VGK phone/data module 3∑ Extron® AAP one RJ-45 female to punch down block leviton CAT6 data single space insert specification codes 04/10 series veneer style pull/hardware C accessories sku grade 1 X none X none X none C X X X finish grommet X X X X X none 22 ∞≤√ $ 185 odeon extron AAP modules description sku w d h weight specifications grade 1 phone/data module VGP 3∑ - ∏ $ 185 VGL 3∑ - ∏ 185 VGM 3∑ - ∏ 185 VGN 3∑ - ∏ 185 VGQ 3∑ - 1Ω 255 3∑ - ∏ 150 Extron® AAP two RJ-45 female to punch down block leviton CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block AMP CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block seimon CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block ortronics CAT6 data single space insert phone/data module Extron® AAP two RJ-45 female to punch down block higher than CAT6 data type connectors systomax MGS500 backward compatible double space insert computer/audio/video module VGC Extron® AAP 15HD, F-F, 15 pin HD female to female 3.5mm stereo mini jack to solder tabs with silk screen “COMPUTER” and “AUDIO” single space insert specification codes 04/10 series veneer style C accessories sku grade 1 X none X none pull/hardware X none C X X X finish grommet X X X X X none 23 ∞≤√ odeon extron AAP modules description sku w d h weight specifications grade 1 computer/audio/video module VGE 3∑ - ∏ $ 250 Extron® Interface AAP 15HD, F-F, 15 pin VGA female to female 3.5mm stereo mini jack female to female silk screen, “COMPUTER” and “AUDIO” single space insert control/computer module VGX 3∑ - 1∏ 890 VGR 3∑ - ∏ 325 VGT 3∑ - ∏ 150 VGG 3∑ - ∏ 65 VGY 3∑ - 1Ω 135 Extron® AAP extender VGA line driver with audio signals up to 250' black powdercoat finish double space insert control/computer module Extron® AAP two USB A female to female barrels single space insert computer/audio/video module Extron® three RCA female to female barrels black powdercoat finish single space insert blank plate Extron® AAP blank plate black powdercoat finish single space insert cable pass-through module Extron® AAP cable pass-through black powdercoat finish sold and ordered as 1 set with left and right specify for use with C-VMW cable sling specification codes 04/10 series veneer style pull/hardware C accessories sku grade 1 X none X none X none C X X X finish grommet X X X X X none 24 ∞≤√ odeon wire management description sku w d h speaker phone grommet VGZ 1 1 1∫ GNC GMT 3 3 3 3 ∆ ∆ VGS 8π 4π 26∫ 2∑ 2∑ 30 weight specifications grade 1 $ 50 polished aluminum specify pull/hardware code 6 communication grommet 65 50 specify with table top order field installed die cast zinc polished aluminum fits 2Ω'' opening specify pull/hardware code 6 wire management system 196 gray, nylon mesh, 2π’’ diameter zippered wire management cover mounting bracket not designed as table support bracket dimensions: 8π’’w x 4π’’d x 1∂”h cover dimensions: 2π’’w x 2π’’d x 24∆”h specify pull/hardware code X wire management snake VGW 225 metallic silver specify pull/hardware code X specification codes 04/10 series sku veneer style C accessories X none X none C X X pull/hardware finish grommet 6 polished aluminum X none X none X X X X 25 ∞≤√ odeon wire management description sku w d h weight specifications grade 1 equipment tray VMZ VMY 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases 140 150 VMX VMW 12∑ 17∑ 16 16 3 3 use with 25'' bases use with 30'' bases 140 150 VNZ 6 2∂ 1π 35 VNY 12∂ 2 1π 295 silver powdercoat VMZ - use with Odeon 25'' base VMY - use with Odeon 30'' base cable sling grey nylon mesh material hooks onto mediatracTM rails specify with Extron pull-through AAP C-VGY wire clip smoke polycarbonate finish 4 included with each table power strip 6 outlet center; 110v 15 amp 15' plug in cord surge protector UL Listed specification codes series C accessories 04/10 C sku veneer style grade 1 X none X none X none X X X pull/hardware finish grommet X none X X X X 26 ∞≤√ odeon Odeon Concept and Assembly Overview MediatracTM grommet system Top assembly Includes the top and the MediatracTM rail assembly Base Exploded view of the construction concept. Order the MediatracTM grommet system For power and data required at the work surface Order the desired top MediatracTM rail system is pre-installed and included in the price. Order the base design The base will straddle the rails. Exploded side view of table ordering process. 04/10 27 ∞≤√ odeon Odeon Base Location Top Length Top Width Top Overhang Top Overhang Top Edge to Center of Base Base Width Top Overhang Summary for End Conditions Top Overhang Summary for Side Conditions Top Edge to the Center of Base 04/10 Top Length Top Overhang 25''/30'' Rect. 25'' Square 30'' Square Base Width Top Width Top Overhang 72'' 78'' 84'' 90'' 96'' 102'' 108'' 114'' 120'' 132'' 144'' 156'' 168'' 180'' 192'' 204'' 216'' 228'' 240'' 18π'' 18π'' 18π'' 19π'' 19π'' 19π'' 20π'' 20π'' 20π'' 21π'' 21π'' 22π'' 22π'' 22π'' 22π'' 24'' 24'' 25'' 25'' 23π'' 23π'' 23π'' 24π'' 24π'' 24π'' 25π'' 25π'' 25π'' 26π'' 26π'' 27π'' 27π'' 27π'' 27π'' 29'' 29'' 30'' 30'' 31∂'' 31∂'' 31∂'' 32∂'' 32∂'' 32∂'' 33∂'' 33∂'' 33∂'' 34∂'' 34∂'' 35∂'' 35∂'' 35∂'' 35∂'' 36∑'' 36∑'' 37∑'' 37∑'' 33π'' 33π'' 33π'' 34π'' 34π'' 34π'' 35π'' 35π'' 35π'' 36π'' 36π'' 37π'' 37π'' 37π'' 37π'' 39'' 39'' 40'' 40'' 25'' 25'' 30'' 30'' 30'' 48'' 54'' 60'' 66'' 72'' 11∑'' 14∑'' 15'' 18'' 21'' 28 ∞≤√ appendix - finishes Finish Selections A three character sku identifies the finish on each species or the laminate selection. Individual components are priced with standard finish or standard laminate. A variety of standard laminate finishes are available. Additional laminate colors may be available but are subject to upcharges and extended lead times. The laminate option is available on components where noted as an option in the series specification code. Listed are the standard laminates. Special finishes on veneers made to customer specifications are subject to factory approval and a 20% net upcharge with a $500 net minimum. Transparent stains and sealers are applied in multiple steps to enhance the beauty of the natural wood. A durable, baked-on, top-coat of conversion varnish or UV topcoat is applied to protect the product. It is recommended that felt, cork or fabric backed desk pads and accessories are used on worksurfaces to miminize wear. When specifying light finishes such as 836, 837, 840 or 850, the color and characteristic variances of both veneer and solid wood are apparent. Therefore, exact color matches are not possible. Q Anigre Standard Finish 805 840 823 841 850 834 860 836 839 J Maple Standard Finish 837 850 C Oak Standard Finish 805 840 836 860 837 865 839 9 Walnut Standard Finish 823 839 841 860 04/10 Plain/Abstract Laminate 601 Solid White, Nevamar S-7004T, with Solid White Edge 602 Neutral Gray, Nevamar S-6012T, with Platinum Edge 603 Sandpiper, Nevamar S-6047T, with Dove Grey Edge 604 Winter Gray Matrix, Nevamar MR-6005T, with Platinum Edge 605 Straw Matrix, Nevamar MR-2006T, with Platinum Edge 606 Carmen Red, Nevamar S-1049T, with Spectrum Red Edge 607 Gray Matrix, Nevamar MR6001T, with Grey Nebula Edge 611 Designer White, Wilsonart D354-60, with Designer White Edge 612 Frosty White, Wilsonart 1573-60, with Frosty White Edge 613 Putty, Wilsonart 1503-60, with Putty Edge 614 Natural Almond, Wilsonart D30-60, with Almond Edge Cherry Standard Finish 805 839 840 834 841 835 836 E F Standard Plain/Abstract 615 Antique White, Wilsonart 1572-60, with Antique White Edge 616 Grey, Wilsonart 1500-60, with Grey Edge 617 Featherstone, Wilsonart D72-60, with Featherstone Edge 618 Haze, Wilsonart D97-60, with Haze Edge 620 Khaki Brown, Wilsonart D50-60, with Khaki Brown Edge 621 Pepperdust, Wilsonart D327-60, with Pepperdust Edge 622 Platinum, Wilsonart D315-60, with Platinum Edge 623 Fashion Grey, Wilsonart D381-60, with Fashion Grey Edge 624 Dove Grey, Wilsonart D92-60, with Dove Grey Edge 628 Amazon, Wilsonart D478-60, with Amazon Edge 630 Hunter Green, Wilsonart D79-60, with Hunter Green Edge 632 Slate Grey, Wilsonart D91-60, with Slate Grey Edge 633 Black, Wilsonart 1595-60, with Black Edge 634 North Sea, Wilsonart D90-60, with North Sea Edge 640 Natural Nebula, Wilsonart 4633-60, with Wallaby Edge 641 Neutral Glace Nebula, Wilsonart 4143-60, with Beige Edge 642 Graphite Nebula, Wilsonart 4623-60, with Black Edge 643 White Nebula, Wilsonart 4621-60, with Platinum Edge W Woodgrain Laminate Standard Woodgrain 650 Fusion Maple, Wilsonart 7909-60, with Natural Maple Edge 651 Solar Oak, Wilsonart 7816-60, with Solar Oak Edge 654 Colombian Walnut, Wilsonart 7943-07, with Colombian Walnut Edge 655 Shaker Cherry, Wilsonart 7935-07, with Cherry Blossom Edge 656 Versailles Anigre, Wilsonart 7923K-07, with Versailles Anigre Edge 657 Brighton Walnut, Wilsonart 7922K-07, with Brighton Walnut Edge 658 New Age Oak, Wilsonart 7938-38, with Clear Maple Edge 670 Gunstock Savoy Walnut, Pionite WW971, with Columbian Walnut Edge 675 Blossom Cherrywood, Formica 758-58, with Oiled Cherry Edge 676 Lacewood, Formica 744-58, with Lacewood Edge 685 Grand Isle Maple, Nevamar W8371T, with African Limba Edge 686 Valencia Teak, Nevamar WT0003PV, with Shadow Oak Edge 687 Sovereign Cherry, Nevamar W8325T, with Wild Cherry Edge 29 ∞≤√ appendix - guaranteed freight program Preferred Carrier Guaranteed Freight Rates Freight charges will be applied to orders as a separate line item based on the zones listed. The freight amount is calculated on the total merchandise net price, excluding any extra discounts beyond standard net pricing. All orders are shipped by Bernhardt Design company trucks or preferred carriers specified by Bernhardt Design. Rates are based on deliveries made Monday through Friday, 8 a.m. until 5 p.m. Dealer warehouse information, including phone number and contact name, must be specified on the purchase order. Direct site deliveries may be requested with an additional freight cost. Bernhardt Design freight rates are based on the following zones with a minimum for each zone. All zones are within the Continental United States. Zone 1 2 3 4 5 6 Minimum Charge Freight Rate $90 $90 $90 $110 $120 $120 7% 8% 9% 11% 13% 15% 3 6 5 4 3 2 1 3 04/10 30 ∞≤√ Prices and Terms Prices and specifications are subject to change without notice. All prices quoted will be FOB our factories. Terms are net 30 days. A service charge of 1∑% per month will be charged on all past due accounts. Order Entry All orders are subject to final acceptance by Bernhardt Design in Lenoir, NC. Receipt of our acknowledgment indicates acceptance of your order subject to the terms set forth on the acknowledgment. Bernhardt Design attempts to clarify all purchase orders. However, in the event the price list number and description on the purchase order differ, the price list number will prevail. Change Orders All reasonable requests for changes to standard table orders will be honored if received in writing prior to the start of production. Custom design and special finish orders are not subject to revision after acknowledgment. Bernhardt Design reserves the right to charge for labor, materials and administration costs for all order changes. Cancellations All acknowledged orders are considered as firm orders and are not subject to cancellation. Custom Design Bernhardt Design may alter products to meet specific needs. Contact your local sales represent-ative when a custom design is needed. Custom designs require minimum quantities, additional lead time and upcharges. A custom job number, available from your local sales representative, must be submitted with purchase orders. Orders combining custom design with standard product cannot be scheduled for production until custom items are approved. Shipping Bernhardt Design will ship in accordance with customer instructions whenever possible. If not specified, Bernhardt Design will exercise its best judgement in selecting a carrier. Orders in production will be shipped as scheduled and cannot be held. 04/10 appendix - terms and conditions High quality cartoning which meets trucking and railroad specifications is standard at no extra charge. Storage If a customer is unable to accept an order when it is ready for shipment, storage may be requested. Acceptance of storage will be at the discretion of Bernhardt Design. All costs including transportation will be at customer expense. A storage charge of 1∑% of the invoice will be assessed for every 30 days, or any part thereof, that merchandise remains in storage. Bernhardt Design considers transfer to storage the equivalent of delivery. This includes invoicing and payment. Customers will bear all risk of damage or loss during storage. Freight Damage and Claims Bernhardt Design is not liable for damages that occur during transit or storage. The carrier assumes all responsibility upon acceptance of product. It is the customer’s responsibility to inspect all products upon receipt and file any claims with the carrier. No product should be refused. If products are received damaged, a written exception should be made on the bill of lading and an immediate inspection be requested of the carrier. Concealed damage must be reported to the carrier within 15 days of receipt. Failure to make claims shall constitute acceptance of the products and waiver any claims of defects, errors or shortages. In the event delivery is made on a Bernhardt Design truck, the products should be carefully inspected for transit damage. If contents are damaged, the driver should be notified to call his dispatcher for immediate disposition. Concealed damage must be reported within 15 days of receipt and product/ packaging held for inspection by a Bernhardt Design representative. Replacements for product damaged in shipment or storage will be manufactured upon receipt of a purchase order. Returns No merchandise may be returned to Bernhardt Design without written consent in the form of a Return Authorization from our Quality Assurance Department stating reason for return and how the item will be shipped. In the event a return is authorized by Bernhardt Design for reasons other than damage or defect, the customer shall be responsible for a 25% restocking fee, as well as a double freight charge. Unauthorized returns will be automatically refused by our receiving department as well as returns not in accordance with Bernhardt Design shipping instructions. Liability for defective merchandise shall be limited to the replacement or repair of that merchandise, and Bernhardt Design shall not be liable for other damages or losses. Measurements and Weights All measurements and weights are approximate and subject to change without notice. Care and Cleaning Finished wood surfaces should be cleaned with a soft damp cloth, wiping in the direction of the grain. Dry with a soft cloth, wiping in the grain direction. Do not use waxes or furniture polish, as these will cause a film build-up. Wood Finishes Bernhardt Design tables are available in standard finishes compatible with casegoods and seating finishes. However, finishes on tables may vary slightly from those on casegoods and seating due to the natural characteristics of the wood. No absolute match is implied or guaranteed. Light Finishes Bernhardt Design offers lighter finishes 836, 837, 840, and 850. Light finishes do not hide or mask the natural characteristics of the wood. It is important that the dealer and customer understand that inherent natural characteristics of the wood will vary from piece to piece when using a light finish. Natural characteristics include the natural discolorations of the wood substance and color variations in glued up stock. These natural characteristics are not considered defects by Bernhardt Design, and therefore merchandise will not be replaced because of these natural characteristics. 31 ∞≤√ Special Finishes Special finishes, made to customer specifications and subject to factory approval, may be available at a 5% net upcharge with a $500 net minimum. Additional leadtime may be required for special finish items. Special finish orders will not be acknowledged until the special finish sample is approved in writing and received by Bernhardt Design Customer Service. Special finish orders are not subject to revision or cancellation after acknowledgment. Warranty Bernhardt Design will repair or replace, at its discretion and without charge to the original purchaser, any table product or part thereof which fails as the result of defects in material and workmanship, under single shift use and normal care, for five years from date of shipment. This warranty does not cover misuse or abuse of product, dramatic temperature changes, exposure to unusual conditions, or damages incurred by contact with seating products. Repair or replacement of discontinued product will be at the discretion of Bernhardt Design. Natural color changes, variations or movements in lumber or veneer products, exposure to extreme temperature changes and direct sunlight may cause color changes and/or surface damage. These are circumstances beyond the control of Bernhardt Design and are not warranty issues. Drawer glides, drawer boxes, drawer pulls, and locking mechanisms have a Life-Time Warranty for the original purchaser. Power or communications components are warranted for one (1) year. This warranty is the customer’s exclusive remedy for product defect and does not apply to damage caused by a carrier, dealer, installer, user modification, or attachments to a product. appendix - terms and conditions Bernhardt Design has the exclusive right to make the final determina-tion of product misuse or abuse. Except as stated above, Bernhardt Design makes no express or implied warranties as to any product, and in particular, makes no warranty of merchantability or of fitness for any particular purpose. Bernhardt Design shall not be liable for any consequential or incidental damages or for commercial loss arising from any product defect. The Bernhardt Design customer is the dealer. All complaints must be resolved through the dealer from which the furniture was purchased. To obtain warranty service the dealer must supply dated proof of purchase. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. General Services Administration Products available on the Bernhardt Design GSA - Federal Supply Service Contract GS-28F-7040G are noted in the product descriptions. For information regarding GSA pricing, please contact your local Bernhardt Design sales representative or call 828 759 6337. Send all GSA payments to: 12197 Collections Center Drive Chicago IL 60693 Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply. Design and Patent Rights All of the products shown in Bernhardt Design catalogs and described in Bernhardt Design price lists are, and remain, the property of Bernhardt Design, with the sole right reserved to manufacture and to distribute. Some of the product designs shown are patented in the United States and will remain the property of Bernhardt Design. Any reproduction of the products constitutes an infringement of patented copyright laws and will be subject to prosecution. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. ∞≤√ Bernhardt Design is a registered trademark of Bernhardt Furniture Company of Lenoir, NC. 04/10 32
Similar documents
Tables PL 1/2007 - Bernhardt design
table is GREENGUARD Certified and certificates are available on Bernhardtdesign.com or GREENGUARD.org.
Bernhardt Design also offers FSC chain-of-custody
certification for conference tables. For mor...
Tables PL 1/2007
A variety of standard laminate finishes are available with vinyl edge bands specifically formulated to correspond to
standard laminates. See finish selections in the appendix for standard laminates...