Frameless shower products

Frameless shower products
Charlotte • Los Angeles • Seattle
www.morseindustries.com
Shower Door Hinges & Clamps
Morse Industries shower hinges are made of solid brass with all moving parts (pins and springs) in stainless steel.
A removable protective insert covers the interior rounded (“mouse ear”) portion of the hinge. This helps keep the
glass from slipping off the hinge and protects it from metal contact, extending the life of both the hinge and the glass.
Hinges are made to accommodate 3/8” to 1/2” (10 to 12 millimeter) glass, are self centering, and contain a 0° return
with reversible 5° pin (preset 5° pins also available).
Paladia Series Hinges Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may
also be special ordered.
Part#
Description
C50-0001
C50-0009
C50-0002
C50-0003
Beveled Edge Wall Mount H-Back Plate Hinge
Beveled Edge Wall Mount Short Back Plate Hinge
Beveled Edge Wall Mount Offset Back Plate Hinge
Beveled Edge 180˚ Glass-to-Glass Hinge
Each hinge includes gaskets, cutting templates and fasteners
C50-0009
C50-0001
C50-0003
C50-0002
Roma Series HingesAvailable in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may
also be special ordered.
Part#
Description
C50-0004
C50-0010
C50-0005
C50-0006
Square Edge Wall Mount Full Back Plate Hinge
Square Edge Wall Mount Short Back Plate Hinge
Square Edge Wall Mount Offset Back Plate Hinge
Square Edge 180˚ Glass-to-Glass Hinge
Each hinge includes gaskets, cutting templates and fasteners
C50-0004
C50-0006
C50-0005
C50-0010
Large Heavy Duty HingesAvailable in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be
special ordered.
C50-0011
Square Edge Wall Mount
Full Back Plate Hinge
Each hinge includes gaskets, cutting templates and fasteners
C50-0012
C50-0014
Square Edge Wall Mount
Short Back Plate Hinge
Square Edge Wall Mount
Offset Back Plate Hinge
C50-0013
Beveled Edge Wall Mount
H-Back Plate Hinge
Morse Industries shower glass clamps are made of solid brass in a variety of finishes and can accommodate 3/8” to 1/2”
(10 to 12 millimeter) glass. Used for securing fixed panels in a shower enclosure application, they may be attached to curb,
ceiling or wall. Clear silicone can be added to provide a clean, water tight appearance.
Traditional Glass Clamps
Heavy Duty Hole-In-Glass Style Clamps
Available in Brushed Nickel, Polished Bright Chrome and Oil
Rubbed Bronze. Hole diameter required: 5/8” (16mm), 3/4” (19mm).
Available in Brushed Nickel, Polished Bright Chrome and Oil
Rubbed Bronze. Hole diameter required: 3/4” (19mm).
Part#
Description
Part#
Description
C50-0031
C50-0032
Traditional Style Fixed Panel Clamp
Oversized Fixed Panel Clamp
C50-0033
C50-0034
Square Edge - Hole in Glass Wall Mount Clamp
Beveled Edge - Hole in Glass Wall Mount Clamp
Each clamp includes neoprene gaskets and fasteners
Each clamp includes neoprene gaskets and fasteners
NOTE: The stud that goes through
the hole made in the glass is
positioned further from
the edge of the glass than that of
the standard clamp. This makes
the Oversized Clamp
the preferred clamps of most
temperers for 1/2” (12mm) glass.
C50-0031
1 3/4” x 1 3/4”
C50-0032
1 3/4” x 1 15/16”
C50-0033
2” x 2”
C50-0034
2” x 2”
Frameless shower products
Towel Bars & Door Pulls
Our shower towel bars and pulls are constructed of 3/4” (19mm) stainless steel or brass tubing (inquire for availability)
and are available in finishes matching our frameless shower hinge collection. 1” (25mm) is also available via special
order.
Single Towel Bar with Shower Door Pull Knob
Double Towel Bar
Includes both decorative removable metal washers as well as interior
plastic washers to protect glass against metal contact. End caps are also
available for both ends of towel bar to allow for bypass doors. Available
in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other
finishes may also be special ordered.
Includes both decorative removable metal washers as well as
interior plastic washers to protect glass against metal contact.
Available in Brushed Nickel, Polished Bright Chrome, and Oil
Rubbed Bronze. Other finishes may also be special ordered.
Part#
Length
C60-0020
C60-0021
C60-0022
18”
24”
26”
Part#
Length
C60-0030
C60-0031
C60-0032
18”
24”
26”
Each handle includes an Allen wrench
Each handle includes an Allen wrench
Back-to-Back Shower Door Pulls
Includes both decorative removable metal washers as well as
plastic interior washers to protect glass against metal contact.
Available in Brushed Nickel, Polished Bright Chrome, and Oil
Rubbed Bronze. Other finishes may also be special ordered.
Part#
Length
C60-0006
C60-0008
6”
8”
Each handle includes an Allen wrench
PVC & Seal Wipes
A variety of PVC seals and edge wipes are available for your shower installation needs. All profiles are
available for both 3/8” and 1/2” glass in 98” lengths.
Clear Multi Purpose H Wipe
Clear PVC Dual Seal and Wipe
Part#
Description
Part#
Description
V11-001
V11-002
3/8” Glass (98”)
1/2” Glass (98”)
V11-0010
V11-0011
3/8” Glass (98”)
1/2” Glass (98”)
Clear PVC Co-Extruded Bottom Wipe with Drip Rail
Part#
Description
V11-0020
V11-0021
3/8” Glass (98”)
1/2” Glass (98”)
1-800-325-7513 www.morseindustries.com
Shower U-Channels
U-Channels are typically used for fixed panel frameless
shower systems. Available in polished bright chrome,
polished bright gold, brushed nickel, oil rub bronze, and
oil rub bronze metallic finishes in 8’ and 12’ lengths. Other
finishes and lengths may also be available. 50 pieces per
case, individually plastic sleeved for protection. Some
finishes not available on all products, please inquire for
availability.
.08”
Shower Header, Snap In Filler &
Vinyl Insert
Both header and snap in filler insert are available in polished bright
chrome, brushed nickel, and oil rub bronze. Header is available in 98”
and 12’ lengths. Snap in filler insert is available in 3’ and 6’ lengths. Other
finishes and lengths may also be special ordered. Clear flexible vinyl
insert is sold by the foot.
.08”
.375”
.375”
.563”
.678”
.565”
A52-0219
for 3/8” glass
A52-0220
for 1/2” glass
.750”
.56”
1.250”
.08”
A42-7479
Snap In Filler
Insert
.08”
.522”
.75”
.75”
.50”
.219”
.339”
1.080”
.563”
A52-0221
for 3/8” glass
.678”
A52-0222
for 1/2” glass
Brass Connectors
A42-7469
Header
V11-0030
Clear Vinyl Insert
for 3/8” glass
Brass Connectors are used to join the A42-7469 header
channel in various configurations.
For nearly 30 years, Morse Industries has partnered with customers
to build a company driven by customer needs. We work closely with
our customers to fulfill requests in a timely and efficient manner while
providing advice on our products and applications.
Our goal is simple: To exceed your expectations by providing you
quality products with convenient and reliable service.
B42-9796
Brass Wall Mount
Anchor Set
B42-9798
135˚ Brass
Corner Mount
B42-9797
90˚ Brass Corner Mount
B42-9799
Adjustable Brass
Corner Mount
1.800.325.7513
Please call for complete details
on our 3 Year Limited Shower Door
Hinge Warranty
Charlotte • Los Angeles • Seattle
25811 74th Avenue South • Kent, WA 98032
www.morseindustries.com