valve feeder - Haumiller Engineering

MODEL 6200
Mechanical track
detent allows
for automated
Jam clearing,
with operational
efficiency of
95% or higher.
VALVE FEEDER
Design • Build • Integrate • Consult
Product Benefits & Features:
Dip Tubes up to 8” long at speeds
of 350 ppm
n
Dip Tubes up to 12 5/8” long at
speeds of 250 ppm
n
Runs Button on and Button off with
No Changeover
n
Mechanical Track Detent allows for
Automated Jam Clearing, does not
Require Full-time Operator
n
Operational Efficiencies of 95%
or higher
n
Machine Details and Specifications:
n
Production Ready
Accepts Dip Tube Diameters from
.062” to .250”
n
n
High-Level Valve Knockoff Operator
n
Efficient use of Floor Space
Options:
n
Option for Placement in Hazardous Location
n
Optional Menu Driven Height Adjustment
n
Bin Level Sensing for Elevator
Unique design for limited floor space and high speeds.
Product Dimensions:
6200 - 72” w X 54” d X 108” h
CAD Drawing Available
Haumiller Engineering Company 445 Renner Dr. Elgin, IL 60123
Ph: 847.695.9111 Fx: 847.695.2092 www.haumiller.com Email: [email protected]
MODEL 5200
VALVE INSERTER
Cam Driven Tube
Jaws guide tube
into can center
to assure
successful
assembly of
parts everytime.
Design • Build • Integrate • Consult
Product Benefits & Features:
n
Accommodates 5/8” x 5/8” Button
on Valve
n Automatic Reject for Tubeless Valves
n
Positive Cam Actuated Valve Placement
n
Machine Details and Specifications:
Cam Driven Tube Jaws Guide Tube
Into Center of Can
n Cam Actuated Valve Placement Tool
Fully Seats Valve Onto Can
n Optional Valve Sensing at Main
Dial Exit
n Tooless Can Diameter Changeover
n
Places Valves with / without Actuators Attached
n
n
Speeds to 400 CPM
Bag On Valve Capable
n
n
Infeed / Outfeed Eyes for Container
Positive Cam Actuated Valve Placement
n
n
Vacuum Valve Retention
Tube Lengths: 2 1/2” to 12 5/8”
n
n
No Valve Stripper Required
Tube Diameters: .098” and .250”
n
n
On Board PLC
Can Diameters: 35mm to 3”
n
Can Heights: 2 1/2” to 12 1/2”
n
No Tool Changeover for Can
n
Single Tool Changeover for Valve
The 5200’s
automatic reject
for tubeless
valves eliminates
defective parts
from production.
Options:
n
Class1, Div 1, XP
n
Operator Touch Screen
n
Valve Placement Sensing
n
Reject Can W/O Valve
n
Can Sensing
n
Screwfeed
n
Finger Pump Placement
n
Motor Driven Height Adjustment
n
SCADA System Interface
Product Dimensions:
5200 - 102” w x 50” d (259.1cm x 127cm)
CAD Drawing Available
Haumiller Engineering Company 445 Renner Dr. Elgin, IL 60123
Ph: 847.695.9111 Fx: 847.695.2092 www.haumiller.com Email: [email protected]