mitsubishi gr.n special parts for

MITSUBISHI GR.N SPECIAL PARTS FOR:
EVO 7 (N5629)
EVO 8 (N5660)
MITSUBISHI EVO 8MR (N5673)
MITSUBISHI EVO 9 (N5688)
Section
CONTENTS
Section 01
BODYSHELL
Section 02
ENGINE
Section 03
TRANSMISSION
Section 04
FUEL
Section 05
ELECTRONICS
Section 06
ELECTRICS
Section 07
SUSPENSION
Section 08
FRONT AXLE
Section 09
REAR AXLE
Section 10
BRAKES
Section 11
EXHAUST
Section 12
CARBON PARTS
Section 13
WHEELS & TYRES
Section 14
MISCELLANEOUS
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
To order the products you can find on this catalogue, please place your order to:
[email protected]
If you wish to have any kind of technical information about the products present
on this catalogue, please send an e-mail to :
[email protected]
Please note that you can order also all the
standard Mitsubishi parts from Ralliart Italy.
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
Description:
PRICE LIST
Language:
ENG
Version:
0.1
Homologation valid from:
RALLIART ITALY PRICE LIST
RETAIL
PRICE
SECTION 01
BODYSHELL
EVO 7, EVO 8, EVO 8MR AND EVO 9 ROLL CAGE
REINFORCED BODY SHELL (WITHOUT ROLL CAGE)
2.249,00 €
7.499,00 €
SECTION 02
ENGINE
EVO HKS ENGINE (WITH A STANDARD ENGINE IN EXCHANGE)
EVO HKS ENGINE (WITHOUT A STANDARD ENGINE IN EXCHANGE)
THROTTLE KIT
TURBO RESTRICTOR
NGK RACING PLUG (EACH)
RACING COIL LOOM
6.549,00 €
11.990,00 €
189,00 €
255,00 €
88,00 €
119,00 €
SECTION 03
TRANSMISSION
EVO 7, EVO 8, EVO 9 GEARBOX
EVO 8 MR GEARBOX
7.490,00 €
7.990,00 €
SECTION 04 FUEL
UNDERFLOOR FUEL CELL
FUEL PUMP
FUEL CELL CARBON COVER
FUEL SAMPLING DEVICE (COMPLETE WITH STAUBLI)
7.499,00 €
490,00 €
1.540,00 €
398,00 €
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
PL.1
Description:
PRICE LIST
Language:
ENG
Version:
0.1
Homologation valid from:
SECTION 05
ELECTRONICS
ECU
ACD (ACTIVE CONTROLLED DIFF)
DASH (DISPLAY UNIT WITH WIRING LOOM)
3.990,00 €
2.590,00 €
4.990,00 €
SECTION 06
ELECTRICS
LIGHTWEIGHT BATTERY
ALLUMINIUM BATTERY SUPPORT
125 Amp ALTERNATOR
CARBON LAMP POD (ONLY THE CARBON PART)
CARBON LAMP POD (COMPLETE WITH XENON BULBS)
CARBON LAMP POD (COMPLETE WITH STANDARD BULBS)
179,00 €
119,00 €
1.399,00 €
990,00 €
4.990,00 €
3.360,00 €
SECTION 07
SUSPENSION
FRONT TOP MOUNT PLATE KIT
FRONT TOP MOUNT UNIBALL
REAR TOP MOUNT PLATE KIT
REAR TOP MOUNT UNIBALL
SET OF EXTREME TECH DAMPERS (4 OFF)
SET OF OHLINS DAMPERS (4 OFF)
298,00 €
115,00 €
175,00 €
69,00 €
7.490,00 €
9.490,00 €
SECTION 08
FRONT AXLE
FRONT ANTI ROLL BAR DIAMETER 26 mm
FRONT ANTI ROLL BAR DIAMETER 29 mm
990,00 €
990,00 €
SECTION 09
REAR AXLE
REAR ANTI ROLL BAR DIAMETER 24 mm
REAR ANTI ROLL BAR DIAMETER 27 mm
990,00 €
990,00 €
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
PL.2
Description:
PRICE LIST
Language:
ENG
Version:
0.1
Homologation valid from:
SECTION 10
BRAKES
XA5.S5.XX
4.710,00 €
XA5.T0.03/04
XA5.S5.31/32
XA5.S5.42
05.5829.23
A3.41.10.014
A1.62.41.299
A3.12.01.120
XA5.S5.16
09.9306.30/40
1.865,00 €
686,00 €
342,00 €
13,00 €
0,40 €
3,70 €
0,35 €
313,00 €
353,00 €
Front gravel kit
XA5.S5.YY
4.517,00 €
Assembly Discs
Brackets
Bell
Disc
XA5.S5.21/22
XA5.S5.43
XA5.S5.18
09.9021.10/20
Front tarmac kit
Assembly Calipers
Assembly Discs
Brackets
Caliper Screws
Caliper Screws Washer
Bracket Screws
Bracket Screws Washer
Bell
Disc
Rear kit - gravel and tarmac
Assembly Calipers
Assembly Discs
Brackets
Caliper Screws
Caliper Screws Washer
Bracket Screws
Bracket Screws Washer
Bell
Disc
FERODO FRONT TARMAC
PADS
FERODO FRONT GRAVEL
PADS
FERODO REAR PADS
BRAKE PRESSURE LIMITER
BRAKE BOOSTER ADAPTER AND SHAFT
HYDRAULIC HANDBRAKE KIT
CASTROL SRF BRAKE FLUID
599,00 €
324,00 €
93,00 €
254,00 €
XA5.S5.ZZ
3.310,00 €
XA3.G2.11/12
XA5.S5.23/24
XA5.S5.14
05.5829.24
A3.41.11.011
A1.62.41.257
A3.12.01.100
XA5.S5.126
09.7277.12/22
1.061,00 €
581,00 €
272,00 €
13,00 €
0,40 €
3,70 €
0,35 €
288,00 €
254,00 €
FRP3088X
385,00 €
FRP3087X
FRP308X
385,00 €
199,00 €
89,00 €
669,00 €
2.559,00 €
59,00 €
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
PL.3
Description:
PRICE LIST
Language:
ENG
Version:
0.1
Homologation valid from:
SECTION 11
EXHAUST
EXHAUST TUBE (TO GO WITH UNDERFLOOR FUEL TANK)
EXHAUST TUBE (TO GO WITH THE FUEL TANK IN THE BOOT)
EXHAUST HOLDER
ALUMINIUM EXHAUST HOLDER
1.849,00 €
1.649,00 €
99,00 €
17,90 €
SECTION 12
CARBON PARTS
CARBON-KEVLAR SUMPGUARD
SUPPORT FOR CORALBA
ROOF VENT
FRONT DOOR CARBON PANEL
REAR DOOR CARBON PANEL
CARBON SIDE MIRROR (2 OFF)
DRIVER FOOT PANEL
CODRIVER FOOT PANEL
NUT GUN HOLDER
ADDITIONAL INTERCOOLER WATER TANK HOLDER
FUEL PUMPS CARBON COVER
UNDERFLOOR KEVLAR PROTECTION
CARBON SPARE WHEEL HOLDER
WINDOW VENT
CARBON DISPLAY UNIT HOLDER
DIFFERENTIAL PUMP PROTECTION
BRACKET ELMETS
1.990,00 €
245,00 €
1.990,00 €
1.090,00 €
990,00 €
550,00 €
390,00 €
390,00 €
145,00 €
145,00 €
210,00 €
990,00 €
199,00 €
390,00 €
290,00 €
455,00 €
150,00 €
SECTION 13
WHEELS & TYRES
ALUMINIUM WHEEL NUT
STEEL WHEEL NUT
SPARE WHEEL HOLDER (COCKPIT)
SPARE WHEEL HOLDER (BOOT)
OZ 8x17" TARMAC WHEEL (Magnesium)
OZ 7x15" GRAVEL WHEEL (Magnesium)
SPEEDLINE 8x17" TARMAC WHEEL (Aluminium)
SPEEDLINE 7x15" GRAVEL WHEEL (Aluminium)
TOORA 8x17" TARMAC WHEEL
TOORA 7x15" GRAVEL WHEEL
9,90 €
6,90 €
255,00 €
119,00 €
395,00 €
350,00 €
190,00 €
145,00 €
190,00 €
145,00 €
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
PL.4
Description:
PRICE LIST
Language:
ENG
Version:
0.1
Homologation valid from:
SECTION 14
MISCELLANEOUS
449,00 €
119,00 €
129,00 €
11,00 €
17,00 €
45,00 €
1.250,00 €
HYDRAULIC JACK
WHEEL NUT SPANNER
REAR WHEEL MUD SCRAPER
ACCELERATOR PEDAL STOP
SUMPGUARD PIN HOLDER
JACKET NET
CORALBA
ALWAYS ASK FOR THE DISCOUNT ON THE RETAIL PRICE.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
PL.5
Description:
BODYSHELL
Language:
ENG
Version:
0.1
Homologation valid from:
01 BODYSHELL
Description
ROLL CAGE
REINFORCED BODY SHELL
Page No.
01.2
01.3
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
01.1
Description:
BODYSHELL
Language:
ENG
Version:
0.1
Homologation valid from:
ROLL CAGE
Item
Description
Part Number
EVO roll cage
Quantity per car
1
Note:
This roll cage it is available and homologated for Evo 7, Evo 8, Evo 8 MR and Evo 9.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
01.2
Description:
BODYSHELL
Language:
ENG
Version:
0.1
Homologation valid from:
REINFORCED BODY SHELL
Item
Description
Reinforced EVO body shell
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
01.3
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
02 ENGINE
Description
HKS EVO ENGINE
THROTTLE KIT
TURBO RESTRICTOR
RACING PLUGS
RACING COIL LOOM
Page No.
02.2
02.3
02.4
02.5
02.6
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.1
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
HKS EVO ENGINE
Item
Description
Evo HKS Engine
Part Number
Quantity per car
1
Note:
It is possible to order any kind of Mitsubishi Evo’s engine, from Evo 7 to the latest Evo 9.
All these engines are Gr. N top spec, dyno tested and they all come with the latest ECU
available.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.2
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
THROTTLE KIT
Item
Description
Throttle kit
Part Number
Quantity per car
1
Note:
This throttle kit will work together with the ECU to get the ALS (Anti Lag System)
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.3
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
TURBO RESTRICTOR
Item
Description
Turbo restrictor
Part Number
Quantity per car
1
Note:
This turbo restrictor comply with the actual Gr. N regulation.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.4
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
RACING PLUGS
Item
Description
Racing plugs
Part Number
Quantity per car
4
Note:
Available for Evo 7, Evo 8 and Evo 9.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.5
Description:
ENGINE
Language:
ENG
Version:
0.1
Homologation valid from:
RACING COIL LOOM
Item
Description
Racing coils
Part Number
Quantity per car
2
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
02.6
Description:
TRANSMISSION
Language:
ENG
Version:
0.1
Homologation valid from:
03 TRANSMISION
Description
EVO 7 - 8 - 8MR - 9 GEARBOX
Page No.
03.2
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
03.1
Description:
TRANSMISSION
Language:
ENG
Version:
0.1
Homologation valid from:
EVO 7 - 8 - 8MR - 9 GEARBOX
Item
Description
Evo 7-8-8MR-9 Gearbox
Part Number
Quantity per car
1
Note:
Ralliart Italy homologated gearboxes, available for Evo 7, Evo 8, Evo 8 MR and Evo 9, are all
with dog engagement.
They are very lightweight, reliable and one of their best characteristic is the very good and
smooth engagement between each gear.
We have also developed the gearbox for the Evo 8 MR, where in order to make the teeth
stronger, we have the 1 st gear backwards.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
03.2
Description:
FUEL
Language:
ENG
Version:
0.1
Homologation valid from:
04 FUEL
Description
UNDRFLOOR FUEL CELL
FUEL PUMP (REPLACEMENT)
FUEL CELL CARBON COVER
FUEL SAMPLING DEVICE
Page No.
04.2
04.3
04.4
04.5
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
04.1
Description:
FUEL
Language:
ENG
Version:
0.1
Homologation valid from:
UNDERFLOOR FUEL CELL
Item
Description
Underfloor fuel cell
Part Number
Quantity per car
1
Note:
This FIA approved underfloor fuel cell is sitting in the original fuel cell position, in order to
lower the Centre of Gravity of the car for a better drivability of the car.
The total capacity is 80 litres.
It is supplied with two Bosch fuel pumps, directly fitted in the fuel cell, filling neck, two VDO to
read the fuel level.
It is also possible to order the complete fuel lines, in the correct lengths, with already all the
fittings approved by FIA. For more information about this, please s end an email to
[email protected]
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
04.2
Description:
FUEL
Language:
ENG
Version:
0.1
Homologation valid from:
FUEL PUMP (REPLACEMENT)
Item
Description
Fuel pump (replacement)
Part Number
Quantity per car
2
Note:
This pump can be ordered as replacement of the ones that are fitted on the fuel cell.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
04.3
Description:
FUEL
Language:
ENG
Version:
0.1
Homologation valid from:
FUEL CELL CARBON COVER
Item
Description
Fuel cell carbon cover
Part Number
Quantity per car
1
Note:
This carbon cover is supplied with two steel skins to protect the carbon from abrasion, plus
an additional steel protection to avoid the propeller shaft to wear out the carbon.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
04.4
Description:
FUEL
Language:
ENG
Version:
0.1
Homologation valid from:
FUEL SAMPLING DEVICE
Item
Description
Fuel sampling device
Part Number
Quantity per car
1
Note:
This will allow you to easily supply the scrutineers with a fuel sample from the car. All the
homologated fittings are for a PTFE “dash 6”hose: this will come complete with the “MaleFemale” Staubli quick disconnect coupling.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
04.5
Description:
ELECTRONICS
Language:
ENG
Version:
0.1
Homologation valid from:
05 ELECTRONICS
Description
ECU
ACD
DASH (DISPLAY UNIT)
Page No.
05.2
05.3
05.4
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
05.1
Description:
ELECTRONICS
Language:
ENG
Version:
0.1
Homologation valid from:
ECU
Item
Description
Part Number
Ecu
Quantity per car
1
Note:
It is possible to order any kind of Mitsubishi Evo ’s ECU, from Evo 7 to the latest Evo 9 one, 3
or 4 plugs. All these ECU will come with the latest map devel oped by Ralliart Italy and HKS.
It is also possible to order the software (open or customer version) where it will be possible to
set up the logging device, and download a lot of data from the car.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
05.2
Description:
ELECTRONICS
Language:
ENG
Version:
0.1
Homologation valid from:
ACD (ACTIVE CONTROL DIFF)
Item
Description
ACD (Active control diff)
Part Number
Quantity per car
1
Note:
This ACD (active control diff) has been developed by Ralliart It aly and HKS and will have the
latest version of the map developed on the test.
It will be possible with the software to create your own map.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
05.3
Description:
ELECTRONICS
Language:
ENG
Version:
0.1
Homologation valid from:
DASH (DISPLAY UNIT)
Item
Description
Dash (display unit)
Part Number
Quantity per car
1
Note:
This display unit works together with the ECU and ACD, is coming with a can link from the
ECU, so you can have many different information to display.
You can also buy the software where you can develop your own pages, set up different
alarms, ecc.
It is also possible to order the carbon dash holder.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
05.4
Description:
ELECTRICS
Language:
ENG
Version:
0.1
Homologation valid from:
06 ELECTRICS
Description
BATTERY AND ALLUMINUM SUPPORT
125 AMP ALTERNATOR
CARBON LAMP POD
Page No.
06.2
06.3
06.4
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
06.1
Description:
ELECTRICS
Language:
ENG
Version:
0.1
Homologation valid from:
BATTERY AND ALLUMINIUM SUPPORT
Item 1
Item 2
Item
Description
1
Lightweight Battery
2
Aluminium Support
Part Number
Quantity per car
1
1
Note:
Weight of the Battery = 5,1 kg (original one = 10,7 kg)
Weight of the Aluminium Suppor t = 156 g (original one = 450 g)
This new battery will allow you to save 3-4 minutes in the service park if you need to change
the gearbox, because you can reach its bolts very easily without removing the battery.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
06.2
Description:
ELECTRICS
Language:
ENG
Version:
0.1
Homologation valid from:
125 Amp ALTERNATOR
Item
Description
1
125 Amp ALTERNATOR
Part Number Quantity per car
RA348832N1
1
Note:
To use together with the small lightweight Deka Battery.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
06.3
Description:
ELECTRICS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON LAMP POD
Item
Description
1
Carbon Lamp Pod
Part Number
Quantity per car
1
Note:
Possible to order both with normal or xenon bulbs.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
06.4
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
07 SUSPENSION
Description
TECHNICAL NOTES
FRONT TOP MOUNT PLATE KIT
REAR TOP MOUNT PLATE KIT
FRONT DAMPER
REAR DAMPER
Page No.
07.2
07.3
07.4
07.5
07.6
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.1
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
New anti-roll bars 2006 and suspension settings: technical notes by Mario Fornaris
Accordingly with the new 2006 technical regulation for Gr. N, Mitsubishi Motors and Ralliart
Italy developed a set of anti-roll bars for tarmac and gravel. The new package was
extensively car tested before the homologation.
These new stiffer anti-roll bars were designed for a better chassis control, reducing the roll
angle and improving precision in driving.
Using the new bars will also allow to reduce the suspension spring rate, with a clear benefit
for grip.
Ralliart Italy suggestion is:
GRAVEL
Front anti-roll bar: D24 or D26
Front Spring: from 45 N/mm to 55 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 50 N/mm to 60 N/mm
TARMAC
Front anti-roll bar: D26 or D29
Front Spring: from 65 N/mm to 85 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 70 N/mm to 90 N/mm
These setting should satisfy any driving style and road condition, still staying within the limits
of the calculation results in terms of suspension frequency and anti-roll stiffness split.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.2
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
FRONT TOP MOUNT KIT
Item
Description
Front top mount plate kit (with uniball)
Part Number Quantity per car
RA403282S1
2
Note:
It is possible also to order just the uniball as a replacement.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.3
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
REAR TOP MOUNT KIT
Item
Description
Rear top mount plate kit (with uniball)
Part Number Quantity per car
2
Note:
It is possible also to order just the uniball as a replacement.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.4
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
FRONT DAMPER
Item
Description
Front damper
Part Number
Quantity per car
2
Note: Available in Tarmac and Gravel Spec, all with HBS. Adjustable: Compression high
speed, Compression low speed and Rebound.
Very wide range of spring rate available.
Possibility to order both Extreme Tech and Ohlins dampers.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.5
Description:
SUSPENSION
Language:
ENG
Version:
0.1
Homologation valid from:
REAR DAMPER
Item
Description
Rear damper
Part Number
Quantity per car
2
Note: Available in Tarmac and Gravel Spec, all with HBS. Adjustable: Compression high
speed, Compression low speed and Rebound.
Very wide range of spring rate available.
Possibility to order both Extreme Tech and Ohlins dampers.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
07.6
Description:
FRONT AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
08 FRONT AXLE
Description
TECHNICAL NOTES
FRONT ANTI ROLL BAR
BUSHES FOR FRONT ANTI ROLL BAR
Page No.
08.2
08.3
08.4
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
08.1
Description:
FRONT AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
New anti-roll bars 2006 and suspension settings: technical notes by Mario Fornaris
Accordingly with the new 2006 technical regulation for Gr. N, Mitsubishi Motors and Ralliart
Italy developed a set of anti-roll bars for tarmac and gravel. The new package was
extensively car tested before the homologation.
These new stiffer anti-roll bars were designed for a better chassis control, reducing the roll
angle and improving precision in driving.
Using the new bars will also allow to reduce the suspension spring rate, with a clear benefit
for grip.
Ralliart Italy suggestion is:
GRAVEL
Front anti-roll bar: D24 or D26
Front Spring: from 45 N/mm to 55 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 50 N/mm to 60 N/mm
TARMAC
Front anti-roll bar: D26 or D29
Front Spring: from 65 N/mm to 85 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 70 N/mm to 90 N/mm
These setting should satisfy any driving style and road condition, still staying within the limits
of the calculation results in terms of suspension frequency and anti-roll stiffness split.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
08.2
Description:
FRONT AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
FRONT ANTI ROLL BARS
Item
Description
Front Anti Roll Bar 26 mm with bushes
Front Anti Roll Bar 29 mm with bushes
Part Number
Quantity per car
1
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
08.3
Description:
FRONT AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
BUSHES FOR FRONT ANTI ROLL BAR
Item
Description
Kit Bushes (2 Items ) for front Anti Roll Bar 26 mm
Kit Bushes (2 Items ) for front Anti Roll Bar 29 mm
Part Number
Quantity per car
1
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
08.4
Description:
REAR AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
09 REAR AXLE
Description
TECHNICAL NOTES
REAR ANTI ROLL BAR
BUSHES FOR REAR ANTI ROLL BAR
Page No.
09.2
09.3
09.4
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
09.1
Description:
REAR AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
New anti-roll bars 2006 and suspension settings: technical notes by Mario Fornaris
Accordingly with the new 2006 technical regulation for Gr. N, Mitsubishi Motors and Ralliart
Italy developed a set of anti-roll bars for tarmac and gravel. The new package was
extensively car tested before the homologation.
These new stiffer anti-roll bars were designed for a better chassis control, reducing the roll
angle and improving precision in driving.
Using the new bars will also allow to reduce the suspension spring rate, with a clear benefit
for grip.
Ralliart Italy suggestion is:
GRAVEL
Front anti-roll bar: D24 or D26
Front Spring: from 45 N/mm to 55 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 50 N/mm to 60 N/mm
TARMAC
Front anti-roll bar: D26 or D29
Front Spring: from 65 N/mm to 85 N/mm
Rear anti-roll bar: D24 or D27
Rear Spring: from 70 N/mm to 90 N/mm
These setting should satisfy any driving style and road condition, still staying within the limits
of the calculation results in terms of suspension frequency and anti-roll stiffness split.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
09.2
Description:
REAR AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
REAR ANTI ROLL BAR
Item
Description
Rear Anti Roll Bar 24 mm with bushes
Rear Anti Roll Bar 27 mm with bushes
Part Number
Quantity per car
1
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
09.3
Description:
REAR AXLE
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
BUSHES FOR REAR ANTI ROLL BAR
Item
Description
Kit Bushes (2 items) for rear Anti Roll Bars 24 mm
Kit Bushes (2 items) for rear Anti Roll Bars 27 mm
Part Number
Quantity per car
1
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
09.4
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
10 BRAKES
Description
TECHNICAL NOTES
FRONT TARMAC BRAKES
FRONT GRAVEL BRAKES
REAR TARMAC AND GRAVEL BRAKES
BRAKE PADS
REAR BRAKE PRESSURE LIMITER
BRAKE BOOSTER ADAPTER & SHAFT
HYDRAULIC HANDBRAKE KIT FOR EVO
CASTROL SRF BRAKE FLUID
Page No.
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
10.10
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.1
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
New Brake system 2006: technical notes by Mario Fornaris
This system was developed by Mitsubishi Motors and Brembo in a very close collaboration
with Ralliart Italy.
All the development tests, both on tarmac and gravel were carried out on a Ralliart Italy
Evo 9.
Taking advantage of the 2006 FIA regulation for Gr. N, the new system is more powerful, but
most of all, much more heath-resistant and long-lasting.
During the tests in all condition we logged disk and calliper temperatures much lower than
the standard brake system; using these new brakes we get the double advantage of a better
cooling and parts that can even resist to a much higher temperature than the standard ones.
For heavy duty use we recommend to change pads before the maximum wear in order to
limit heath transfer to the calliper. Disks should be checked regularly and changed between
300 Km and 600 Km accordingly to the use, but immediately in the unlikely case that cracks
appear.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.2
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
FRONT TARMAC BRAKES
Item
Description
Front tarmac kit
Part Number Quantity per car
XA5.S5.XX
1
Assembly Caliper (left)
Assembly Caliper (right)
Assembly Disc (left)
Assembly Disc (right)
Brackets
Caliper Screws
Caliper Screws Washer
Bracket Screws
Bracket Screws Washer
XA5.T0.03
XA5.T0.04
XA5.S5.31
XA5.S5.32
XA5.S5.42
05.5829.24
A3.41.10.014
A1.62.41.299
A3.12.01.120
Replacement front tarmac parts
Bell
Disc (left)
Disc (right)
Front Tarmac Bush (assembly disc)
Self Looking Nut (assembly disc)
Washer (assembly disc)
1
1
1
1
2
4
4
4
4
Part Number
XA5.S5.16
09.9306.30
09.9306.40
XA1.B6.29
XA1.B6.30
A3.41.10.006
Note:
Please note that the only differences between Tarmac and Gravel on the front brake kit
are:
1) Discs
2) Heavy duty disc fixings
3) Bells
4) Brackets
5) Pads
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.3
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
FRONT GRAVEL BRAKES
Item
Description
Front gravel kit
Part Number Quantity per car
XA5.S5.YY
1
Assembly Caliper (left)
Assembly Caliper (right)
Assembly Disc (left)
Assembly Disc (right)
Brackets
Caliper Screws
Caliper Screws Washer
Bracket Screws
Bracket Screws Washer
XA5.T0.03
XA5.T0.04
XA5.S5.21
XA5.S5.22
XA5.S5.43
05.5829.23
A3.41.10.014
A1.62.41.299
A3.12.01.120
Replacement front gravel parts
Bell
Disc (left)
Disc (right)
Front Gravel Bush (assembly disc)
Self Looking Nut (assembly disc)
Washer (assembly disc)
1
1
1
1
2
4
4
4
4
Part Number
XA5.S5.18
09.9021.10
09.9021.20
XA1.B6.27
XA1.B6.30
A3.41.10.006
Note:
Please note that the only differences between Tarmac and Gravel on the front brake kit
are:
1) Discs
2) Heavy duty disc fixings
3) Bells
4) Brackets
5) Pads
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.4
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
REAR TARMAC AND GRAVEL BRAKES
Item
Description
Rear gravel and tarmac kit
Part Number
XA5.S5.ZZ
Quantity per car
1
Assembly Caliper (left)
Assembly Caliper (right)
Assembly Disc (left)
Assembly Disc (right)
Brackets
Caliper Screws
Caliper Screws Washer
Bracket Screws
Bracket Screws Washer
XA3.G2.11
XA3.G2.12
XA5.S5.23
XA5.S5.24
XA5.S5.14
05.5829.24
A3.41.11.011
A1.62.41.257
A3.12.01.100
1
1
1
1
2
4
4
4
4
Replacement rear parts
Bell
Disc (left)
Disc (right)
Rear Bush (assembly disc)
Self Looking Nut (assembly disc)
Washer (assembly disc)
Part Number
XA5.S5.26
09.7277.12
09.7277.22
XA1.B6.27
XA1.B6.30
A3.41.10.006
Note:
Please note that the rear brake kit is the same for tarmac and gravel.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.5
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
PADS FOR BRAKES
Item
Description
Front pads for tarmac
Front pads for gravel
Rear pads (gravel & tarmac)
Part Number Quantity per car
FRP3088X
4
FRP3087X
4
FRP308X
4
Note:
Comparison of in-stop friction performance: 22080km/h snub (Temp. 500°C)
www.federal-mogul.com/ferodoracing
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.6
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
BRAKE PRESSURE LIMITER
Item
Description
Pression Control Valve
Part Number
Quantity per car
2
Note:
VALVE,PROPORTIONING(SPLIT POINT)
140
130
120
110
100
90
80
WITHOUT L IM ITER
70
60
WITH L IMITER
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
14 0
2
INPUT (MASTER CYLINDER) FLUID PRESSURE [ kgf/cm ]
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.7
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
BRAKE BOOSTER ADAPTER & SHAFT
Item
Description
Brake Booster Adapter & Shaft
Part Number
RA569146S1
Quantity per car
1
Note:
This part can replace the standard brake booster.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.8
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
HYDRAULIC HANDBRAKE KIT FOR EVO
Item
Description
Hydraulic handbrake kit for Evo
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.9
Description:
BRAKES
Language:
ENG
Version:
0.1
Homologation valid from:
06-03-01
CASTROL BRAKE FLUID
Item
Description
Castrol SRF brake fluid
Part Number
Quantity per car
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
10.10
Description:
EXHAUST
Language:
ENG
Version:
0.1
Homologation valid from:
11.1 EXHAUST
Description
EXHAUST TUBE
EXHAUST HOLDER
ALUMINIUM EXHAUST HOLDER
Page No.
11.2
11.3
11.4
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
11.1
Description:
EXHAUST
Language:
ENG
Version:
0.1
Homologation valid from:
EXHAUST TUBE
Item
Description
Exhaust tube
Part Number Quantity per car
1
Note:
This exhaust system is supplied complete with catalyst homologated for Gr. N.
It is available either for a car using the underfloor fuel tank or using the fuel tank in the boot.
Please specify on your order which kind of pipe you need.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
11.2
Description:
EXHAUST
Language:
ENG
Version:
0.1
Homologation valid from:
EXHAUST PIPE HOLDER
Item
Description
Exhaust pipe holder
Part Number
Quantity per car
1
Note:
This exhaust pipe holder can be bolted directly on the original rear cross member.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
11.3
Description:
EXHAUST
Language:
ENG
Version:
0.1
Homologation valid from:
ALUMINIUM EXHAUST HOLDER
Item
Description
Aluminium exhaust holder
Part Number
Quantity per car
1
Note:
This aluminium holder can be bolted between the end of the exhau st and the bodyshell.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
11.4
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
12 CARBON PARTS
Description
CARBON-KEVLAR SUMPGUARD
CARBON SUPPORT FOR THE CORALBA
ROOF VENT
FRONT DOOR CARBON PANEL
REAR DOOR CARBON PANEL
CARBON SIDE MIRROR
DRIVER FOOT PANEL
CODRIVER FOOT PANEL
NUT GUN HOLDER
ADDITIONAL INTERCOOLER WATER TANK HOLDER
FUEL PUMPS CARBON COVER
UNDERFLOOR KEVLAR PROTECTION
CARBON SPARE WHEEL HOLDER
WINDOW VENT
CARBON DISPLAY UNIT HOLDER
DIFFERENTIAL PUMP PROTECTION
HELMET’S BRACKET
Page No.
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9
12.10
12.11
12.12
12.13
12.14
12.15
12.16
12.17
12.18
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.1
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON-KEVLAR SUMPGUARD
Item
Description
1
Carbon-Kevlar sumpguard
Part Number
Quantity per car
1
Note:
Different weights and thickness, from tarmac to heavy gravel. Available for Evo 7, Evo 8,
Evo 8 MR and Evo 9.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.2
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON SUPPORT FOR CORALBA
Item
Description
1
Carbon support for Coralba
Part Number
Quantity per car
1
Note:
Weight of the Carbon support for Coralba = 112 g
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.3
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
ROOF VENT
Item
Description
1
Roof Vent
Part Number
Quantity per car
1
Note:
Developed in the wind tunnel for the Lancer WRC.
VIEW FROM INSIDE
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.4
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
FRONT DOOR CARBON PANEL
Item
Description
Front door carbon panel
Part Number
Quantity per car
1 left + 1 right
Note:
Very light front carbon panel, please note that to complain with the art 254 of the Gr. N
regulation, it must be used with the standard anti intrusion door bars.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.5
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
REAR DOOR CARBON PANEL
Item
Description
Rear door carbon panel
Part Number
Quantity per car
1 left + 1 right
Note:
Very light rear carbon panel (less then 700 g), pleas e note that to complain with the art 254 of
the Gr. N regulation, it must be used with the standard anti intrusion door bars.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.6
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON SIDE MIRROR
Item
Description
Carbon mirror
Part Number
Quantity per car
1
Note:
This carbon mirror comply with the regulation about the minimum area of the side mirror.
Changing from the standard mirror to the carbon one will reduce the drag of the car.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.7
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
DRIVER FOOT PANEL
Item
Description
Driver foot panel
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.8
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CODRIVER FOOT PANEL
Item
Description
Codriver foot panel
Part Number
Quantity per car
1
Note:
This codriver foot panel can fit the port able extinguisher directly on the carbon.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.9
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
NUT GUN HOLDER
Item
Description
Nut gun holder
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.10
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
ADDITIONAL INTERCOOLER WATER TANK HOLDER
Item
Description
Intercooler water tank holder
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.11
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
FUEL PUMPS CARBON COVER
Item
Description
Fuel pumps carbon cover
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.12
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
UNDERFLOOR KEVLAR PROTECTION
Item
Description
Underfloor Kevlar protection
Part Number
Quantity per car
2
Note:
This parts are protecting all the underfloor surf ace, avoiding the bodyshell to get damaged
especially on gravel.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.13
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON SPARE WHEEL HOLDER
Item
Description
Carbon spare wheel holder
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.14
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
WINDOW VENT
Item
Description
Window vent
Part Number
Quantity per car
2
Note:
This window vents will be placed on the rear door’s window.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.15
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
CARBON DISPLAY UNIT HOLDER
Item
Description
Carbon display unit holder
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.16
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
DIFFERENTIAL PUMP COVER
Item
Description
Differential pump cover
Part Number
Quantity per car
1
Note:
This lightweight carbon protection will cover the differential hydraulic pump that is situated on
the rear left corner of the car.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.17
Description:
CARBON
PARTS
Language:
ENG
Version:
0.1
Homologation valid from:
HELMET’S CARBON BRACKET
Item
Description
Helmet’s carbon bracket
Part Number
Quantity per car
2
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
12.18
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
13 WHEEL & TYRES
Description
WHEEL NUT
SPARE WHEEL HOLDER (COCKPIT)
SPARE WHEEL HOLDER (BOOT)
OZ 8 X 17” TARMAC WHEEL
OZ 7 X 15” GRAVEL WHEEL
SPEEDLINE 8 X 17” TARMAC WHEEL
SPEEDLINE 7 X 15” GRAVEL WHEEL
TOORA 8 X 17” TARMAC WHEEL
TOORA 7 X 15” GRAVEL WHEEL
Page No.
13.2
13.3
13.4
13.5
13.6
13.7
13.8
13.9
13.10
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.1
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
WHEEL NUT
Item 1
Item 2
Item
Description
1
Aluminium Nut
2
Steel Nut
Part Number
Quantity per car
20
20
Note:
Weight of the Aluminium Nut = 16 g
Tightening Torque = 100 Nm
Weight of the Steel Nut = 54 g
Tightening Torque = 100 Nm
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.2
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
SPARE WHEEL HOLDER
Item
Description
1
Spare wheel holder
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.3
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
SPARE WHEEL HOLDER (boot)
Item
Description
1
SPARE WHEEL HOLDER (Boot)
Part Number
Quantity per car
1
Note:
This is a quick release strap that hold an eventual 2 nd spare wheel on the boot.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.4
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
OZ 8x17” TARMAC WHEEL
Item
Description
1
OZ 8x17” Tarmac wheel
Part Number
Quantity per car
5
Note:
This wheel is very lightweight, made in Magn esium and is homologated for the use in Gr. N
because it is not forged.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.5
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
OZ 7x15” GRAVEL WHEEL
Item
Description
1
OZ 7x15” Gravel wheel
Part Number
Quantity per car
5
Note:
This wheel is very lightweight, made in Magn esium and is homologated for the use in Gr. N
because it is not forged.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.6
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
SPEEDLINE 8x17” TARMAC WHEEL
Item
Description
1
Speedline 8 x 17” Tarmac wheel
Part Number
Quantity per car
5
Note:
Available in Aluminium and Magnesium.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.7
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
SPEEDLINE 7x15” GRAVEL WHEEL
Item
Description
1
Speedline 7x15” Gravel wheel
Part Number
Quantity per car
5
Note:
Available in Aluminium.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.8
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
TOORA 8x17” TARMAC WHEEL
Item
Description
1
TOORA 8 x 17” Tarmac wheel
Part Number
Quantity per car
5
Note:
Available in Aluminium.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.9
Description:
WHEELS &
TYRES
Language:
ENG
Version:
0.1
Homologation valid from:
TOORA 7x15” GRAVEL WHEEL
Item
Description
1
TOORA 7x15” Gravel wheel
Part Number
Quantity per car
5
Note:
Available in Aluminium.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
13.10
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
14 MISCELLANEOUS
Description
HYDRAULIC JACK
WHEEL NUT SPANNER
REAR WHEEL MUD SCRAPER
ACCELERATOR PEDAL STOP
SUMPGUARD PIN HOLDER
JACKET NET
CORALBA
Page No.
14.2
14.3
14.4
14.5
14.6
14.7
14.8
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.1
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
HYDRAULIC JACK
Item
Description
1
Hydraulic Jack
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.2
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
WHEEL NUT SPANNER
Item
Description
1
Wheel nut Spanner
Part Number
Quantity per car
1
Note:
Weight of Wheel nut Spanner = 476 g
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.3
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
REAR WHEEL MUD SCRAPER
Item
Description
1
Rear wheel mud scraper
Part Number
Quantity per car
2
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.4
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
ACCELERATOR PEDAL STOP
Item
Description
1
Accelerator pedal stop
Part Number
Quantity per car
1
Note:
Adjustable aluminium accelerator pedal stop.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.5
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
SUMPGUARD PIN HOLDER
Item
Description
1
Sumpguard pin holder
Part Number
Quantity per car
2
Note:
Made by stainless still: you can drill the holes and put a normal pin to hold your sumpguard.
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.6
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
JACKET NET
Item
Description
1
Jacket net
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.7
Description:
MISCELLANEOUS
Language:
ENG
Version:
0.1
Homologation valid from:
CORALBA
Item
1
Coralba
Description
Part Number
Quantity per car
1
Note:
Send your orders to: [email protected]
No claim, no warranty, Motorsport can be dangerous: RAI can not be held responsible of any accident arising from the use of RAI parts.
14.8