the full catalog

Grippers
Rotary Actuators
Linear Actuators
Linear Guides
Mechatronics
.com
General Grippers
Rotary Actuators
page 4
page 14
OEM Replacement
Grippers
Linear Actuators
page 8
NEW!
page 16
Mechatronics
Electric Grippers
page 10
Linear Guides
page 20
About Gimatic
page 22
Specialty Grippers
page 12
2
 216-535-4811
View our Online,
Interactive Catalog!
www.GimaticUSA.com
Using Gimatic USA’s interactive catalogs online is easy - just like paging through our paper
catalogs - but with added benefits. Our online catalogs provide you with the most up-todate information and new products as soon as they are added! Hotlinks in the table of
contents and product sections make navigation easy and fast. You can also search by keyword, or part number. Bookmark your favorite items and add comments on e-sticky notes.
Print and share pages. Try Gimatic USA’s interactive online catalogs today.
3
.com
.com
General Grippers
These top-performing, classic grippers offer a
wide variety of design features and provide solid
performance at a good price. Maintenance and
lubrication free from 10 million to 40 million cycles.
SX
Two- and 3-Jaw Parallel Self-Centering Gripper
•
•
•
•
Designed for use in harsh environments
Completely sealed, with IP67 protection class
Very high grip force
Sensor ready
2-Jaw SX
3-Jaw SXT
4
 216-535-4811
GM
Two-Jaw Self-Centering Gripper
• Double acting
• Wide choice of stroke lengths and gripping force options
• Gripping force is constant on both directions along the
entire stroke
• Sensor ready
SZ
Two-Jaw, Self-Centering Parallel Gripper
•
•
•
•
Double acting
Patented self-centering system
Multiple options for mounting and porting
Sensor ready
.com
5
General Grippers
PE
Two-Jaw, Self-Centering Parallel Gripper
• Double acting (single acting available on
PE25 and PE45 units)
• Gripping force is constant in both directions
the entire length of stroke
• Light weight alloy construction
• Sensor ready
6
 216-535-4811
MGX
Two-Jaw, Self-Centering Parallel Gripper
• Double acting
• Robust guide in a flat profile design
• Sensor ready
When comparing the MGX to competing grippers with
the same stroke, the MGX has higher grip force, lighter
weight, smaller size, and lower price.
XP, XT, XA, XR
Self-Centering Grippers
•
•
•
•
•
Double acting
Excellent cost/performance ratio
Lightweight alloy and plastic resin construction
Sensor ready
Gripper can be mounted on two sides
.com
7
OEM Replacement Grippers
Interchangeable with other OEM grippers for mounting dimensions, fingers,
feeding ports, etc. But the internal construction is optimized giving better
performance & grip force. Lower prices compared to OEM competitors.
GS
Parallel Gripper
•
•
•
•
Double acting
Stroke is 4.6mm to 30mm
Patented adjustable backlash system
Available in Spring Open or Spring Closed models
• Sensor ready
• 10 million cycles maintenance free
GW
Self-Centering Rocking Gripper
•
•
•
•
Double acting
Stroke is 2x20°
Sensor ready
20 million cycles maintenance free
GXS
Radial Gripper
• Double acting
• Stroke is 2x92°
• Very high gripping force at the end of the closing stroke
• Multiple mounting options
• Sensor ready
8
 216-535-4811
DH Series and TH Series
• Double acting with Normally Open or
Normally Closed option
• Two jaw stroke range is 4mm to 8mm
• Three jaw stroke is 2.5mm to 16mm
• 20 million cycles maintenance free
• Sensor ready
Three-jaw TH
Two-jaw DH
SGP-S
Parallel Gripper
•
•
•
•
•
•
Double acting
Stroke is 4mm to 12mm
Patented adjustable backlash system
Multiple mounting and porting options
Sensor ready
20 million cycles maintenance free
PQ
•
•
•
•
Robust guidance
Strokes from 15mm to 63mm
Sensor ready
10 million cycles maintenance free
.com
9
!
W
E
N
Mechatronics
2- and 3-Jaw Parallel Self-Centering Electric Grippers
•
•
•
•
•
•
•
•
•
•
•
•
•
No electricity is used when gripper is engaged
Gripper retention guaranteed in power loss
Long-life brushless DC motor
Built in motor driver
Operates on low voltage 24 volt DC and uses a simple ON/OFF signal from your PLC
M8x1, 3 poles standard connection
Self-centering jaw system (patented)
Fiber-carbon gear reduction
Maintenance-free for 10 milion cycles
T-slot style jaws for heavy loads
Optimal force, weight, and dimensions ratio
Can be mounted to a rotary actuator without a special mounting plate
Optional magnetic sensors
2-Jaw Electric Gripper
A microprocessor and all electronics
are integrated into the gripper so
that no other external controller
is necessary. The microprocessor
operates the motor and turns it off
with no programming required.
The carrier with the springs is
driven by a 2-stage reducer and a
worm. The carrier drives two jaws
with a patented self-centering
mechanism--already tested in
other Gimatic grippers.
10
 216-535-4811
Plug & Play User-Friendly Electric Grippers and Rotary Actuators
3-Jaw Electric Gripper
Electric Rotary Actuators
•
•
•
•
•
Capable of 90° or 180° rotation
Same features as the electric grippers
Can be fitted to a gripper without a special mounting plate
Sensor ready
10 million cycles maintenance free
.com 11
Specialty Grippers
TFA
• Single acting with spring opening
• Optional suspension kit
• Easily mounted on profile framing using standard Gimatic 10mm, 14mm, or 20mm clamps
PS-P
•
•
•
•
Double-acting radial motion
Constructed of lightweight alloy
Well protected against dusty environments
More than two sensors can be mounted to
them, giving these grippers added versatility
• Sensor ready
• 10 million cycles maintenance free
12
 216-535-4811
MFD/MFU
Expansion Gripper for ID Gripping
• Silicone or EPDM expander
• Grip diameters from 8 to 85mm
• Options include nose cones for centering and
proximity magnetic sensors
• Several mounting accessories available
HS
High-Speed Gripper
•
•
•
•
•
MFD models compress
and expand with a
downward movement.
Specially suited for high-speed operation
Very fast opening/closing time
Lightweight
Sensor ready
10 million cycles maintenance free
MFU models compress
and expand with an
upward movement.
PT
Needle Gripper
• Suitable for textile and food industries
• Double acting
• The stroke for the four needles can be
adjusted simultaneously
• Several mounting accessories are available
• 10 million cycles maintenance free
.com 13
Rotary Actuators
Our Rotary Actuators have continuously adjustable
angles and as many as four intermediate stops
using the RTD unit with the RT Series. Both the RT
and R Series are sensor ready and are warranted for
10 million cycles maintenance and lubrication free.
All units have end-of-rotation accessories available.
RTD Intermediate Stopping Units
14
 216-535-4811
RT
•
•
•
•
Rack and pinion patented movement
Continuously adjustable stroke
Large ball bearings on the shaft
Through hole in the pinion
ITSC
Pneumatic Indexing Tables
•
•
•
•
•
Available in two sizes with 4, 6, or 8 positions
Clockwise or counter clockwise models
High torque
Suitable for heavy loads
Reduced weight and overall dimensions
Shock Absorbers
Dissipate kinetic energy and get
shorter indexing times using one
or two shock absorbers.
R-Series
• Suitable for 90° or 180° rotation angles
• Integrated rotating distributor of compressed air
• Both side and bottom porting is standard
.com 15
Linear Actuators
Our Linear Actuators range in stroke from 10mm
to 2000mm. All are sensor ready and warranted
for 10 million cycles maintenance free. No
lubrication required.
ZE-P
•
•
•
•
Piston bore 6mm, 10mm, or 16mm
Stroke 10mm, 20mm, 30mm
Double acting
Internal bumpers
ZX
• Double acting
• Very high performance/cost ratio
• Constructed of a light alloy and
plastic resin making it lightweight
• High rigidity
16
 216-535-4811
ZA-Series
• Bore 2x8mm, 2x16mm, or 2x20mm
• Stroke 25mm, 50mm, 100mm,
150mm, and 200mm
• Double acting
• Very favorable performance/price ratio
• Optional end-stroke adjusters
ZA Linear Actuators
partially extended.
.com 17
Linear Actuators
L40
•
•
•
•
•
High rigidity and defection resistance
Up to 66lbs on the carrier
Patented guidance with recirculating ball bearings
Patented belt drive
Hydraulic shock absorbers on the carrier are standard
Z-Series
• Bore 2x8mm, 2x16mm, or 2x20mm
• Stroke 25mm, 50mm, 100mm, 150mm, and 200mm
• Double acting
• Very favorable performance/price ratio
• Shock absorbers available
18
 216-535-4811
Gimapick Modular Pick-and-Place Actuators
• Modular - Standard components are used to
configure a pick and place robot to suit your
application needs
• Standardized - Interface kits allow easy
connection because components have
standardized mounting patterns
• Convenient - Air lines are internal in the
components to make connection easy and neat
• Economical - Use the Gimapick pneumatic
components with standard valves and a
programmable controller for a low-cost system.
.com 19
Linear Guides
These are available in lengths up to 6000mm and
are powered by ISO cylinders, rodless cylinders, linear
motors, magnetic drives, Omega transmission, or belt
drives. Gimatic Linear Actuators feature a patented
bearing system and are sensor ready with a 10 million
cycle life maintenance and lubrication free.
LM
•
•
•
•
LP
• Patented bearing system
• Several mounting options with t-nuts
• More than one carrier can be fitted to each rail
LZ
• Patented bearing system
• Several mounting options with t-nuts
• More than one carrier can be fitted to each rail
20
 216-535-4811
Patented bearing system
Several mounting options with t-nuts
Available in lengths up to 6000mm
More than one carrier can be fitted to each rail
LL
•
•
•
•
•
Patented bearing system
Easily mounted and inexpensive
Available in lengths up to 6000mm
Several mounting options with t-nuts
More than one carrier can be fitted
to each rail
For ISO cylinders
For rodless cylinders
Omega transmission
Belt drive and pulleys
For rodless cylinder
magnetically coupled
Mitsubishi motor
Visit GimaticUSA.com for more drive interfaces.
.com 21
About Gimatic
Gimatic is a highly respected
European
manufacturer
of
pneumatic
and
mechatronic
automation components and plays
a leading role in producing grippers,
linear slides and rotary actuators for
parts handling customers around
the world. In more than 25 years,
Gimatic has achieved ISO 9000
Certification, designed and built
more than one million grippers, and
owns more than 200 patents.
Gimatic USA is headquartered near
Cleveland, Ohio, and has served the North
American market with Gimatic components
and systems for more than 10 years.
Serving the assembly, packaging, robotics,
and general automation industries, Gimatic
USA provides components for a wide range
of parts handling needs including pickand-place robots, grippers, actuators, and
end-of-robotic-arm tooling. We maintain an
extensive inventory of Gimatic products so
most orders can ship the day you place it.
22
GimaticUSA
provides
the
North
American industrial automation market
with the wide range of advanced Gimatic
handling products and develops new
problem-solving technologies for parts
handling.
.com 23
PRSRT STD
US POSTAGE
PAID
WILLOUGHBY OH
PERMIT NO 58
28300 Euclid Avenue
Wickliffe, Ohio 44092
Gimatic S.p.A
Via Enzo Ferrari
25030 Roncadelle Brescia, Italy
www.Gimatic.com
[email protected]
Gimatic USA
28300 Euclid Avenue
Wickliffe, Ohio 44092
Phone: 216-535-4811
Fax: 216-535-4833
www.GimaticUSA.com
[email protected]