D2-AKIKO® D2

Transcription

D2-AKIKO® D2
®
®
D -AKIKO
22
Automatic Door
It is a state-of-the-art and versatile automatic door.
A
A compact,
compact, surface-mounted
surface-mounted sliding
sliding door
door operator
operator
for
for light-weight
light-weight doors,
doors, easy
easy to
to install.
install.
You can choose any one of the following three door operation modes for your needs.
• Fully Automatic Door mode.
This door can be used as an ordinary automatic door.
• Semi-automatic Door mode.
Open a door slightly by hand and then the door opens automatically to the full end
and automatically closes.
• Manual Door mode
Open and Close the door by hand. Even in this case, the door moves very lightly
with little resistance.
The resistance and noise are at minimal levels, D2-AKIKO® can be used even inside a
room comfortably. Also D2-AKIKO® is equipped with a gearless motor. This makes it
unnecessary to lubricate the gears and easy to maintain this operator.
1
2
3
4
5
6
Safety Return Function
Safety test by using a balloon shows very well how the door reacts sensitively so as not to press any
persons caught in between.
7
®
®
D -AKIKO
22
D2 -AKIKO®
Model
Single
Installation method
Movable Door weight
Door dimensions (m2)
Door width
Power supply
Drive system
Motor unit
Belt Drive
Electrical Motor Output
Opening speed
Closing speed
Bi-parting
Surface Mounted
40kg × 2doors
Max.2.0 × 2doors
450mm - 1100mm
40kg × 1door
Max.2.2 × 1door
500mm - 1200mm
AC 100V ± 10%
Direct drive system
DC brushless motor
Super Torque Tooth belt
16W
100mm/sec - 500mm/sec
50mm/sec - 400mm/sec
Please set the closing speed at 350mm/sec or less for Full-Automatic Door mode.
*:: Please
set the closing speed at 250mm/sec or less for Semi-Automatic Door mode.
*
D2-AKIKO® UNS-150 / UNW-150
View from inside of the single doors
150
Sensor wiring
10
100
H
DH
Power supply wiring
Optional outer power switch
Beam
FIX
3
150
10
FL
DS
DW
W
View from inside of the bi-parting doors
10
150
Sensor wiring
10
Power supply wiring
H
DH
Optional outer power switch
50
Beam
FIX
FIX
10
FL
DS
DW
3
DW
DS
W
Authorized Distributor
Export Department
Japan Automatic Door Co., Ltd.
Automatic Door
16-5, Kamisaginomiya 3-chome, Nakano-ku, Tokyo. 165-0031 Japan.
Telephone: 813-3398-3620. Fax: 813-3970-2525.
Web Page: http://www.jad.co.jp/
"D2-AKIKO" is a registered trademark of Japan Automatic Door Co., Ltd.
07-09-3K