Securitron POWERJUMP™ ICPT

Securitron
POWERJUMP™ ICPT
ASSA ABLOY, the global leader
in door opening solutions
Product Overview
The Securitron® PowerJump™ Inductive Coupling Power Transfer
(ICPT), from ASSA ABLOY, is a two-piece power transfer system that
sends up to a half-amp of low-voltage power across the air gap between
frame and door contactlessly and wirelessly using technology similar to
that used to charge an electric toothbrush.
The Problem
A common issue when installing electrified door hardware is how to bring power to
a moving, swinging or sliding door? The solutions available run power wires from
the frame to the door through an electrified hinge or an armoured cable that is
surface or mortice mounted.
In addition solutions currently available share some common issues in regards to
installation, durability and security. Cable transfers require an additional step of
moving the wires across the door from the hinge side to the lock. This is usually
accomplished by drilling a long tunnel through the centre of the door.
Traditional power transfers rely on moving parts, which over time may expose the
internal wires to pinching, friction or wear from repeated opening and closing of
the door. With use, the moving parts may bind and the wires may break, requiring
repair and maintenance.
The Solution
Securitron® from ASSA ABLOY has developed a new method of transferring power
to a moving door – magnetic inductive coupling. Power is transferred across the
door gap using a two-piece system that operates on the same principles used in
cordless toothbrushes and cell phone charging mats. This safe and flexible product
is called The Securitron PowerJump™ ICPT (Inductive Coupling Power Transfer).
The power pathway is invisible and undetectable to door users, and with no moving
parts or wires across the gap it eliminates the risks of friction, wear or accidental
breakage.
What is Inductive Coupling?
The technology is based on magnetic properties discovered by Michael
Faraday and Nikola Tesla more than a hundred years ago discovering the
ability of magnetic fields to create or “induce” an electrical charge in
1831.
Inductive coupling is the result of magnetic fields that are generated during the flow
of electricity. A conductor, such as wire, creates a magnetic field when a fluctuating
current is applied. When a second conductor is brought into the changing magnetic
field, it also becomes magnetised. This “induces” a voltage on the second conductor.
Because magnetic fields can span empty space, such as a door gap, power can be
“jumped” across the gap safely, without wires or physical contact between the two
pieces of the system.
Magnetic coils that generate inductive coupling are
commonly used in motors and transformers.
Magnetic induction is a basic fundamental of power generation and transmittal
in transformers, generators and motors. The Securitron® PowerJump™ ICPT
uses the principles of inductive coupling to bridge power across the gap
between frame and door.
Features and Benefits
•
•
•
•
•
•
•
•
•
•
Low Maintenance – has no moving parts to fail
Flexible - can be mounted on latch, hinge or top of door to suit the application
Time saving – no door core drilling required
Dual voltage – The unit is field selectable to 12V or 24V DC by moving a jumper*
Fail secure/PTO devices only – not for use with fail safe/PTL devices
CE marked to EMC Directive – tested to not have an impact on other electrical devices
Works on a gap up to 4.7mm between each unit – allows installation around the door
Magnacare lifetime replacement warranty – gives confidence in the product
For all door materials – suitable for installation in timber, aluminium and steel doors
Successfully completed a 30 minute fire test – confidence that the units installation
will not affect the integrity of a fire door.
• One unit suits all applications – supplied with installation instructions, fixings, packers
and templates to enable installation in all applications from one box
• Durable – unit has been tested to 2,000,000 cycles at maximum load
• Patented solution
*Powerjump™ does not transfer latchbolt monitoring, REX or data signals.
Technical Information
Dimensions
Frame side (send)
32mm x 70mm x 37mm
Door side (receive)
32mm x 70mm x 40mm
Use with
Fail Secure/PTO Locks Only
Maximum Door Gap
4.7mm
Maximum Input
500mA@ 24VDC
Output Voltage
12V or 24VDC
Output Amperage
500mA 12VDC : 250mA @ 24VDC
Operating Temperature
0-49° C
CE
EMC Directive
Endurance
2,000,000 cycles
Supplied with
Adhesive backed templates
Complete fixing pack
Fitting Instructions
Ordering Information
ICPT
Securitron POWERJUMP™ Inductive Coupling Power Transfer
ASSA ABLOY is the global leader in
door opening solutions, dedicated to
satisfying end-user needs for security,
safety and convenience.
ASSA ABLOY is represented in all
major regions, in both mature and
emerging markets, with leading
positions in Australia, Europe,
North America and the Middle East.
As the world‘s leading lock group,
ASSA ABLOY offers a more complete
product range of door opening
solutions than any other company
on the market.
ASSA ABLOY Security Solutions
School Street
Willenhall
WV13 3PW
Tel: 0845 873 4838
Fax: 0845 873 4839