Turnover

ACTiV
Sp. z o.o.
PL 83-032 Pszczółki
ul. Bałtycka 4
tel 058 692 05 23, fax 058 692 80 22; e-mail: [email protected]
Edition - September 2012
BRIEF COMPANY PROFILE
ACTIV Sp. z o.o. (Co. Ltd) is based in Pszczółki, about 30 kilometers away from Gdańsk. Currently the
company employs nearly 160 people in its two locations: the main factory next to the Head Office and
the Outfitting Department in Gdańsk, close to the shipyard area.
Our core services can be carried out on board of any type of seagoing vessel, offshore vessel, inland
barge, tugboat, fishing vessel, motor and sail yachts, etc. These include:

wall/ceiling insulation incl. fixing of pins with using the HILTI pins shooter or HILBIG electric
pinning system

covering of surfaces and pipes with metal plates

delivery and assembly of wall and ceiling panels

delivery and assembly of various floor systems teak deck panels, floating floors, PVC covering
carpets/textile covers, ceramic tiles, mastic coverings, etc.

delivery and assembly of sanitary blocks including systems connections

delivery and assembly of metal furniture (excl. its production)

covering the outer surfaces with wooden floors

production of marine furniture production and its assembly on board

electrical (incl. lighting) , water and sanitary system installation in outfitting works areas

assembly of HVAC systems in outfitting works areas

metal plating of low temperature piping LPG/LNG systems on board
The above scope of work are carried out either on the new ships being under construction and on
board ships in the repair shipyards
Essentials from ACTIVs’ reference list 












m/v AURA, owner - OY GAIAMARE AB, Finland
m/v SIMARA ACE, owner- AXEL CAMILLO EITZEN, Norway
m/v SILUNA AC, owner – AXEL CAMILLO EITZEN, Norway
m/v CORAL METHANE, owner – ANTHONY VEDER, Holland
m/v BBC Eugeniusz Kwiatkowski, owner – GDANSK SEA LINES, Poland
m/v GDAŃSK, owner - GDANSK SEA LINES, Poland
m/v EMMA, owner - GDANSK SEA LINES, Poland
m/v MOLDEFIORD; owner – FJORD 1 MRF, Norway
m/v FANNEFJORD; owner – FJORD 1 MRF, Norway
FPV HIRTA; owner – Scottish Fisheries Protection Agency (SFPA), Scotland
m/f SCANIA; owner – Unity Line (PŻG), Poland
m/v OLIVIER TIDE; owner – TIDEWATER MARINE INC, USA
m/v BOS ANGLER; owner – BERGEN OLIFIELD SERVICES (BOS), Norway
















m/v AHTS (series of 7 units); owner - TIDEWATER MARINE INC, USA
m/v IBEEV (2 units); owner – AGIP KCO
m/v Ella; owner - Stamco Shipmanagement, Greece – “turn-key” conversion of the
accommodation part of the superstructure
m/f “Stena Hollandica”, owner - Stena Line- Sweden car/pax ferry
SKS 116 -fjord ferry - Norway - works done in Norway
Oil drilling platform “SEA JACK” – new accommodation modules - final outfitting works
m/f “Stena Britannica” -, Stena Line - Sweden - car/pax ferry
B608/1 – m/f “FINLAGGAN” – owner Caledonian Marine Assets - UK - car/pax day ferry
SKS 125/2 – fjord ferry - Norwegian interest
KTR 851 - owner Polish Navy
m/f “CAP FINESTRE “ owner - Brittany Ferries - cruise ferry
Oil drilling platform “ARCTIC II” – assembly of interior outfitting items
B610/ 1 & 2– owner - Torghatten Nord AS., Norway – fjord Ferry – turn-key works
B611/ 1 & 2 – owner - Torghatten Nord AS., Norway – fjord Ferry - turn-key works
s/y “Kapitan Borchardt” – private owner, Poland – new furniture and other interior
outfitting items
s/y “HELENA” – owner - Sail Training Association Finland (STAF) – total refit (turn –key)
works
Pending projects:



Project R79 – m/y “ANDROS” – private owner, Germany
B120/1- 4 – owner - Torghatten Nord AS, Norway - car /pax ferry - turn-key works
B851/1-6 – PSV – owner - Edison Chouest Offshore, USA - turn-key works
Financial results
Turnover
18000 000 PLN
16000 000 PLN
14000 000 PLN
12000 000 PLN
10000 000 PLN
Turnover
8000 000 PLN
6000 000 PLN
4000 000 PLN
2000 000 PLN
0 PLN
2009
2010
2011
1st half of
2012
PHOTO GALLERY - the work recently carried out by ACTIV Sp z o.o.
1. Metal plating of gas piping systems on LPG/LNG Ethylene Carrier
3. Reefer store compartments insulation
2. Assembly of cable traces
4. Assembly of galley and restaurant equipment
5. Ceiling/wall panels at corridors, staircases, passages and other public compartments
6. Public compartments, passengers’ passages, crew mess rooms - compartment complex outfitting work
7. Sanitary compartments assembly and outfitting
8. Assembly and modifications of crew/passengers cabins (including furniture production)
9. m/f STENA GERMANICA III (ex Stena Hollandica)– standard and deluxe cabins assembly, staircases and corridors - works completed in
August 2010
10. Conversion of the accommodation areas on MPP vessel
11. Mock up of the yacht cabin – crew cabin standard
12. m/f “FINLAGGAN” outfitting works in cabins and public compartments
13. Fjord ferry – “turn-key” realization
14. Platform A2SEA - “SEA JACK ” – offshore accommodation modules – outfitting of accommodation areas (final corrections only)
15. s/y “KAROL BORCHARDT” – refit of the interior areas and wooden items:
16. s/y “HELENA” – repair works including: total refit of machinery, electric and sanitary system, rigs and accommodation items
ACTIV offers a wide range of repair works, modifications or conversions, which can be performed on
any type of vessel moored at a harbour/shipyard or (subject to conditions) onboard a vessel during
short range sails between nearest harbours. ACTIV works in close cooperation with a professional
Design Office, which allows considerable flexibility in terms of adapting the existing technical
documentation or concept design to workshop standards. The company’s current offer can be found in
our own marine furniture catalogue prepared in cooperation with furniture designers.
To ensure the highest standard of services, ACTIV employs mobile teams of highly skilled outfitting
staff whose work is coordinated with containerized logistics of materials and devices.
The company also provides repairs and modifications to passenger cabins and other compartments,
done in cooperation with German companies on board of 3 passenger cruisers owned by ARCALIA
SHIPPING, CO. LTD (Classic International Cruises) – Portugal, on their regular Atlantic voyages. In order
to ensure maximum safety at sea, we have replaced gas welding with a considerably more efficient
HILBIG electric pinning system.
Thanks to, cooperation with numerous leading marine furniture and interior equipment producers
such as company BANCO – Poland, supplemented by application of the latest technological solutions
and skilled staff, ACTIV is able to provide potential Clients with a comprehensive and complementary
offer while guaranteeing the highest standard of work at the same time.
For any other additional information please contact ACTIV Sp. z o.o. (Co. Ltd) , 83-032 Pszczółki,
Poland, ul. Bałtycka 4, tel.: +4858 692 05 23, +4858-712-6033, fax +4858 692 80 22, +4858-7126035,
mobile +48 512 196 180, by e-mail: [email protected].