Brochure - Heating bench COMODO

MADE IN EU
CÓMODO (esp.) MEANS COMFORTABLE
During the design process of our new bench type convector
heater COMODO, we wanted it to be comfortable, solid and
modern good looking. But first and foremost we put the best
energy efficiency in the marketplace ever onto on our wish-list.
So, primarily we have modified our heating coil in order to make it
even more energy efficient and offering by consequence optimisation of the heating system overall running cost. Having this
sorted out we decided to close ‘the beast’ within exceptionally
elegant casing. This is the whole story behind the designing of a
heating bench COMODO.
From comfort with love
FULL GLAZED FINISH
COMODO - our new heating bench appears as looking very
noble. The side walls we have finished by full polished glazed
cover. The glass we used for this is super save tempered one
and there are two basic colours available – deep deep black
or gentle, mild white. Why shouldn’t you also consider
making those glazed surfaces as the advertising space, while
it could display your logo or light advert just on the sides of
your new bench convector heater.
It’s your choice
REAL OAK WOOD
Oak is considered as exeptionally strong, long-living and
imposing tree. It was the primary reason for selecting this
specific kind of wood to cover our new COMODO bench
type convectors as a top end seat. The three massive oak
wood boards that are used as the top end of the sitting,
are considered as exceptionally scratch and other mechanical
damage resistant product. Those boards are looking
especially nice composing with their delicate graining that
is being protected the same as the whole board surface
by the special transparent coating, in order to protect
and keep the same good format of those boards during many
years of a usage
PRODUCT FEATURES:
•
•
•
•
•
fire safety class: A1
no harmless fumes from any of raw materials nor cotes
maximum allowed working pressure: 1.0 MPa
pressure test: 1.3 MPa
ordinal heat output for the installation water parameters
75/65/20°C, ∆T=50
• maximum operational temperature: 95°C
Length [mm]
Heat output [W]
Water capacity [dm3]
Product order code
1062
1381
1,25
CMV5-45/42/106
1562
2243
1,86
CMV5-45/42/156
STANDARD COMPONENTS:
• Cover made of steel galvanised with zink-magnesium layer,
RAL 7047 and RAL 9005 powder-coated
• Unit sides are made of tempered glass
• Coil - copper-pipe with aluminium fins water side heat
exchanger,
• Air went valve,
• TRV (thermostatic valve),
• Connections ET3/4˝
• Sitting boards that is made from coated oak wood
Other wood materials and finishes concerning sitting bench convector are
available on demand.
453
453
103
420
130
L-260
L
UK Branch: Lower Ground Floor, 145-157 St. John Street, London, EC1V 4PY, UK
Tel: +44 (0) 20 3290 0665; Mob: +44 (0) 7826 45 43 45
www.veranoconvector.co.uk
VERANO
ul. Vetterów 7a
20-277 Lublin
POLAND
Tel. +48 81 44 08 330
Tel. +48 515 166 103
Fax. +48 81 44 08 333